Update the Tigon driver to support 1000baseTX gigE over copper AceNIC

cards. This basically involves switching to the 12.4.13 firmware, plus
a couple of minor tweaks to the driver.

Also changed the jumbo buffer allocation scheme just a little to avoid
'failed to allocate jumbo buffer' conditions in certain cases.

1 files changed, 14 insertions, 6 deletions

diff --git a/share/man/man4/ti.4 b/share/man/man4/ti.4
index d66b913..2b9a919 100644
--- a/share/man/man4/ti.4
+++ b/share/man/man4/ti.4
@@ -65,21 +65,29 @@ vendors that use the Tigon chipset under OEM contract.
 The
 .Nm
 driver has been tested with the following Tigon-based adapters:
-.Bl -bullet -offset indent
+.Pp
+.Bl -bullet -compact -offset indent
+.It
+The Alteon AceNIC V gigabit ethernet adapter (1000baseSX)
+.It
+The Alteon AceNIC V gigabit ethernet adapter (1000bassTX)
 .It
-The Alteon AceNIC V gigabit ethernet adapter
+The 3Com 3c985-SX gigabit ethernet adapter (Tigon 1)
 .It
-The 3Com 3c985-SX gigabit ethernet adapter
+The 3Com 3c985B-SX gigabit ethernet adapter (Tigon 2)
 .It
 The Netgear GA620 gigabit ethernet adapter
 .El
 .Pp
 The following should also be supported but have not yet been tested:
-.Bl -bullet -offset indent
+.Pp
+.Bl -bullet -compact -offset indent
 .It
 The Digital EtherWORKS 1000SX PCI Gigabit Adapter
 .It
 Silicon Graphics PCI gigabit ethernet adapter
+.It
+Farallon PN9000SX Gigabit Ethernet adapter
 .El
 .Pp
 While the Tigon chipset supports 10, 100 and 1000Mbps speeds, support for
@@ -195,7 +203,7 @@ the network connection (cable).
 .Xr ifconfig 8
 .Rs
 .%T Alteon Gigabit Ethernet/PCI NIC manuals
-.%O http://www.alteon.com/support/openkits
+.%O http://sanjose.alteon.com/open.shtml
 .Re
 .Sh HISTORY
 The
@@ -206,4 +214,4 @@ device driver first appeared in
 The
 .Nm
 driver was written by
-.An Bill Paul Aq wpaul@ctr.columbia.edu .
+.An Bill Paul Aq wpaul@bsdi.com .