mdoc(7) police: overhaul.

Approved by:	re

1 files changed, 5 insertions, 9 deletions

diff --git a/share/man/man4/pst.4 b/share/man/man4/pst.4
index 6da90b8..d513da8 100644
--- a/share/man/man4/pst.4
+++ b/share/man/man4/pst.4
@@ -30,32 +30,28 @@
 .Os
 .Sh NAME
 .Nm pst
-.Nd Device driver for Promise Supertrak SX6000
+.Nd device driver for Promise Supertrak SX6000
 .Sh SYNOPSIS
-Include this line in the kernel config file:
 .Cd device pst
-.Pp
 .Sh DESCRIPTION
 This driver is for the Promise Supertrak SX6000 ATA hardware RAID controller.
-It supports (in hardware) RAID levels 0, 1, 0+1, 3, 5 and JBOD on up to 
-6 ATA disk drives, including automatic rebuild and hotswap, and supports 
+It supports (in hardware) RAID levels 0, 1, 0+1, 3, 5 and JBOD on up to
+6 ATA disk drives, including automatic rebuild and hotswap, and supports
 signalling disk status on LED's on Promise Superswap disk enclosures.
 The Supertrak lines of controllers does not support non-disk devices.
-.Pp
 .Sh NOTES
 The
 .Nm
 driver does not support manipulating the RAID from the OS, RAID's need
-to be setup from the onboard BIOS. However hot swap, hot spare, and
+to be setup from the onboard BIOS.
+However hot swap, hot spare, and
 automatic rebuilds are supported without reboot.
-.Pp
 .Sh HISTORY
 The
 .Nm
 driver first appeared in
 .Fx 4.7 .
 .Sh AUTHORS
-.An -nosplit
 The
 .Nm
 driver and man page was written by