Markup fixes.

1 files changed, 23 insertions, 21 deletions

diff --git a/share/man/man4/natmip.4 b/share/man/man4/natmip.4
index f51df42..154e97d 100644
--- a/share/man/man4/natmip.4
+++ b/share/man/man4/natmip.4
@@ -3,7 +3,7 @@
 .\"	Fraunhofer Institute for Open Communication Systems (FhG Fokus).
 .\" 	All rights reserved.
 .\"
-.\" Author: Hartmut Brandt <harti@freebsd.org>
+.\" Author: Hartmut Brandt <harti@FreeBSD.org>
 .\"
 .\" Redistribution and use in source and binary forms, with or without
 .\" modification, are permitted provided that the following conditions
@@ -43,10 +43,12 @@ Without any
 additional signalling stacks or other modules it is possible to build
 a CLIP (classical IP over ATM) network based on PVCs.
 .Pp
-An ATM network card (en0 in this example) is configured for IP by something
+An ATM network card
+.Li ( en0
+in this example) is configured for IP by something
 like:
 .Pp
-.Dl # ifconfig en0 128.252.200.1 netmask 0xffffff00 up
+.Dl "ifconfig en0 128.252.200.1 netmask 0xffffff00 up"
 .Pp
 IP routing is done with special interface routes (routes with directly
 reachable destinations) with a link layer gateway address.
@@ -128,20 +130,20 @@ The cutoff decrease factor (CDF).
 .El
 .Pp
 To add a PVC the
-.Dq route
+.Xr route 8
 utility can be used:
-.Pp
-.Ic # route add -iface
-.Ar <remote IP address>
-.Ic -link
-.Ar <iface> Ns Ic \&: Ns Ar <lladdr>
+.Bd -ragged -offset indent
+.Nm route Cm add
+.Fl iface Aq Ar "remote\ IP\ address"
+.Fl link Ao Ar iface Ac : Ns Aq Ar lladdr
+.Ed
 .Pp
 The
-.Ar <iface>
+.Ar iface
 is the ATM interface through which
-.Ar <remote IP address>
+.Ar "remote\ IP\ address"
 can be reached and
-.Ar <lladdr>
+.Ar lladdr
 is the link layer address as a string of dot-separated, hexadecimal bytes.
 .Pp
 NATM also supports the old, original format.
@@ -185,23 +187,23 @@ To enable the links use the following commands:
 .Pp
 on host 128.252.200.1:
 .Bd -literal -offset indent -compact
-# ifconfig en0 128.252.200.1 netmask 0xffffff00 up
-# route add -iface 128.252.200.2 -link en0:3.0.0.c9.0
-# route add -iface 128.252.200.3 -link en0:3.0.0.ca.3.0.c3.50.0.27.10.0.0.a
+ifconfig en0 128.252.200.1 netmask 0xffffff00 up
+route add -iface 128.252.200.2 -link en0:3.0.0.c9.0
+route add -iface 128.252.200.3 -link en0:3.0.0.ca.3.0.c3.50.0.27.10.0.0.a
 .Ed
 .Pp
 on host 128.252.200.2:
 .Bd -literal -offset indent -compact
-# ifconfig en0 128.252.200.2 netmask 0xffffff00 up
-# route add -iface 128.252.200.1 -link en0:3.0.0.c9.0
-# route add -iface 128.252.200.3 -link en0:3.0.0.cb.1.1.86.a0
+ifconfig en0 128.252.200.2 netmask 0xffffff00 up
+route add -iface 128.252.200.1 -link en0:3.0.0.c9.0
+route add -iface 128.252.200.3 -link en0:3.0.0.cb.1.1.86.a0
 .Ed
 .Pp
 on host 128.252.200.3:
 .Bd -literal -offset indent -compact
-# ifconfig en0 128.252.200.3 netmask 0xffffff00 up
-# route add -iface 128.252.200.1 -link en0:3.0.0.ca.3.0.c3.50.0.27.10.0.0.a
-# route add -iface 128.252.200.2 -link en0:3.0.0.cb.1.1.86.a0
+ifconfig en0 128.252.200.3 netmask 0xffffff00 up
+route add -iface 128.252.200.1 -link en0:3.0.0.ca.3.0.c3.50.0.27.10.0.0.a
+route add -iface 128.252.200.2 -link en0:3.0.0.cb.1.1.86.a0
 .Ed
 .Pp
 This can also be done in