Remove single-space hard sentence breaks. These degrade the quality

of the typeset output, tend to make diffs harder to read and provide
bad examples for new-comers to mdoc.

1 files changed, 10 insertions, 5 deletions

diff --git a/share/man/man4/isp.4 b/share/man/man4/isp.4
index a5e1bd9..c16c732 100644
--- a/share/man/man4/isp.4
+++ b/share/man/man4/isp.4
@@ -103,7 +103,8 @@ General configuration options for all adapters include:
 .Cd options SCSI_ISP_PREFER_MEM_MAP
 .sp
 for which the option value is a bit mask of units for which you want this
-option to apply. The options are, respectively, for not loading new firmware
+option to apply.
+The options are, respectively, for not loading new firmware
 at startup, ignoring card NVRAM settings, and preferring memory mapped
 versus I/O port PCI access methods.
 .Pp
@@ -133,14 +134,17 @@ Configuration options specific to Fibre Channel Cards are:
 .Cd options SCSI_ISP_WWN
 .sp
 The first option is a bit mask of units for which you want to enable full
-duplex mode. This typically would only make sense if fabric support is
+duplex mode.
+This typically would only make sense if fabric support is
 enabled and you are directly connected to a switch.
 The second defines whether Fibre Channel Fabric support should be enabled.
 The third defines whether whether the first level SCC lun support should
 be enabled- this converts the normal 16 Logical Unit support to support for
-65536 Logical Units. The last option should be a string that defines an
+65536 Logical Units.
+The last option should be a string that defines an
 overriding World Wide Node Name (WWNN) should you wish to override NVRAM
-settings. It is recommended that you compile in firmware if you select
+settings.
+It is recommended that you compile in firmware if you select
 any of these options.
 .Sh BOOT OPTIONS
 .Pp
@@ -192,7 +196,8 @@ Simple Name Server subcommand which some switches don't handle as well
 as they should.
 .Pp
 Sometimes, when booting, the driver gets stuck waiting for the Fibre Channel
-f/w to tell it that the loop port database is ready. In this case you'll
+f/w to tell it that the loop port database is ready.
+In this case you'll
 see an announcement that the loop state has a value of 0x1. To unwedge
 the system, unplug and replug the fibre channel connection, or otherwise
 cause a LIP (Loop Initialization Primitive sequence)- this will kick the f/w