pseudo-device -> device in kernel config lines. Removed whitespace at EOL.

Reviewed by:	joerg, dd

1 files changed, 7 insertions, 7 deletions

diff --git a/share/man/man4/en.4 b/share/man/man4/en.4
index adf86a7..57c8569 100644
--- a/share/man/man4/en.4
+++ b/share/man/man4/en.4
@@ -8,9 +8,9 @@
 .Nd device driver for Midway-based ATM interfaces
 .Sh SYNOPSIS
 .Cd "device en"
-.Cd "pseudo-device atm"
+.Cd "device atm"
 .Sh DESCRIPTION
-The 
+The
 .Nm
 device driver supports Midway-based ATM interfaces including the
 Efficient Networks, Inc. ENI-155 and Adaptec ANA-59x0.
@@ -24,13 +24,13 @@ To add a PVC to a host you must use the ``route'' command:
 .Dl # route add -iface <remote IP address> -link en0:z.0.x.y
 where x and y are the byte encoding of the VCI to use, and z is the
 byte encoding of the following flags.
-.Dl 0x01 (use AAL5), 
+.Dl 0x01 (use AAL5),
 .Dl 0x02 (if using AAL5, use a LLCSNAP header)
 Thus, parameter 3 means AAL5 and LLC/SNAP encapsulation.
 Note that BPF works only with LLC/SNAP encapsulation.
 .Sh EXAMPLES
 Suppose you have 2 hosts 128.252.200.1 and 128.252.200.2 connected
-by ATM through PVC # 201 (0xc9).    
+by ATM through PVC # 201 (0xc9).
 To enable the link use the following commands:
 .Dl on host 128.252.200.1:
 .Dl	# ifconfig en0 128.252.200.1 netmask 0xffffff00 up
@@ -51,12 +51,12 @@ The driver extensively uses DMA on PCI.
 The first
 generation PCI chipsets do not work or exhibit poor performance.
 .Sh SEE ALSO
-.Xr ifconfig 8 , 
-.Xr pvcsif 8 , 
+.Xr ifconfig 8 ,
+.Xr pvcsif 8 ,
 .Xr pvctxctl 8 ,
 .Xr route 8
 .Sh AUTHORS
 .An Chuck Cranor
 of Washington University implemented EN driver
-in 1996 for 
+in 1996 for
 .Nx .