Add device driver support for the Broadcom BCM570x family of gigabit

ethernet controllers. This adds support for the 3Com 3c996-T, the
SysKonnect SK-9D21 and SK-9D41, and the built-in gigE NICs on
Dell PowerEdge 2550 servers. The latter configuration hauls ass:
preliminary measurements show TCP speeds of over 900Mbps using
only normal size frames.

TCP/IP checksum offload, jumbo frames and VLAN tag insertion/stripping
are supported, as well as interrupt moderation.

Still need to fix autonegotiation support for 1000baseSX NICs, but
beyond that, driver is pretty solid.

1 files changed, 204 insertions, 0 deletions

diff --git a/share/man/man4/bge.4 b/share/man/man4/bge.4
new file mode 100644
index 0000000..72ac3ab
--- /dev/null
+++ b/share/man/man4/bge.4
@@ -0,0 +1,204 @@
+.\" Copyright (c) 2001 Wind River Systems
+.\" Copyright (c) 1997, 1998, 1999, 2000, 2001
+.\"	Bill Paul <wpaul@windriver.com>. All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\" 3. All advertising materials mentioning features or use of this software
+.\"    must display the following acknowledgement:
+.\"	This product includes software developed by Bill Paul.
+.\" 4. Neither the name of the author nor the names of any co-contributors
+.\"    may be used to endorse or promote products derived from this software
+.\"   without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
+.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+.\" THE POSSIBILITY OF SUCH DAMAGE.
+.\"
+.\" $FreeBSD$
+.\"
+.Dd September 27, 2001
+.Dt BGE 4
+.Os
+.Sh NAME
+.Nm bge
+.Nd "Broadcom BCM570x PCI gigabit ethernet adapter driver"
+.Sh SYNOPSIS
+.Cd "device miibus"
+.Cd "device bge"
+.Sh DESCRIPTION
+The
+.Nm
+driver provides support for various NICs based on the Broadcom BCM570x
+family of gigabit ethernet controller chips, including the
+following:
+.Pp
+.Bl -bullet -compact
+.It
+3Com 3c996-T (10/100/1000baseTX)
+.It
+Dell PowerEdge 2550 integrated BCM5700 NIC (10/100/1000baseTX)
+.It
+SysKonnect SK-9D21 (10/100/1000baseTX)
+.It
+SysKonnect SK-9D41 (1000baseSX)
+.El
+.Pp
+All of these NICs are capable of 10, 100 and 1000Mbps speeds over CAT5
+copper cable, except for the SysKonnect SK-9D41 which supports only
+1000Mbps over multimode fiber.
+The BCM570x builds upon the technology of the Alteon Tigon II. It has
+two R4000 CPU cores and is PCI v2.2 and PCI-X v1.0 compliant. It
+supports IP, TCP
+and UDP checksum checksum offload for both receive and transmit,
+multiple RX and TX DMA rings for QoS applications, rules-based
+receive filtering, and VLAN tag stripping/insertion as well as
+a 256-bit multicast hash filter. Additional features may be
+provided via value-add firmware updates.
+The BCM570x supports TBI (ten bit interface) and GMII
+transceivers, which means it can be used with either copper of 1000baseX
+fiber applications. Note however the device only supports a single
+speed in TBI mode.
+.Pp
+Most cards also use the Broadcom BCM5401 or BCM5411 10/100/1000
+copper gigabit tranceivers,
+which support autonegotiation of 10, 100 and 1000mbps modes in
+full or half duplex.
+.Pp
+The BCM5700 also supports jumbo frames, which can be configured
+via the interface MTU setting.
+Selecting an MTU larger than 1500 bytes with the
+.Xr ifconfig 8
+utility configures the adapter to receive and transmit jumbo frames.
+Using jumbo frames can greatly improve performance for certain tasks,
+such as file transfers and data streaming.
+.Pp
+The
+.Nm
+driver supports the following media types:
+.Bl -tag -width 10baseTXUTP
+.It Cm autoselect
+Enable autoselection of the media type and options.
+The user can manually override
+the autoselected mode by adding media options to
+.Xr rc.conf 5 .
+.It Cm 10baseT/UTP
+Set 10Mbps operation.
+The
+.Xr ifconfig 8
+.Ic mediaopt
+option can also be used to select either
+.Cm full-duplex
+or
+.Cm half-duplex
+modes.
+.It Cm 100baseTX
+Set 100Mbps (fast ethernet) operation.
+The
+.Xr ifconfig 8
+.Ic mediaopt
+option can also be used to select either
+.Cm full-duplex
+or
+.Cm half-duplex
+modes.
+.It Cm 1000baseTX
+Set 1000baseTX operation over twisted pair.
+.Cm full-duplex
+and
+.Cm half-duplex
+modes are supported.
+.It Cm 1000baseSX
+Set 1000Mbps (gigabit ethernet) operation.
+Both
+.Cm full-duplex
+and
+.Cm half-duplex
+modes are supported.
+.El
+.Pp
+The
+.Nm
+driver supports the following media options:
+.Bl -tag -width full-duplex
+.It Cm full-duplex
+Force full duplex operation.
+.It Cm half-duplex
+Force half duplex operation.
+.El
+.Pp
+The
+.Nm
+driver also supports one special link option for 1000baseTX cards:
+.Bl -tag -width link0
+.It Cm link0
+With 1000baseTX cards, establishing a link between two ports requires
+that one port be configured as a master and the other a slave.
+With autonegotiation,
+the master/slave settings will be chosen automatically.
+However when manually selecting the link state, it is necessary to
+force one side of the link to be a master and the other a slave.
+The
+.Nm
+driver configures the ports as slaves by default.
+Setting the
+.Cm link0
+flag with
+.Xr ifconfig 8
+will set a port as a master instead.
+.El
+.Pp
+For more information on configuring this device, see
+.Xr ifconfig 8 .
+.Sh DIAGNOSTICS
+.Bl -diag
+.It "bge%d: couldn't map memory"
+A fatal initialization error has occurred.
+.It "bge%d: couldn't map ports"
+A fatal initialization error has occurred.
+.It "bge%d: couldn't map interrupt"
+A fatal initialization error has occurred.
+.It "bge%d: no memory for softc struct!"
+The driver failed to allocate memory for per-device instance information
+during initialization.
+.It "bge%d: failed to enable memory mapping!"
+The driver failed to initialize PCI shared memory mapping.
+This might
+happen if the card is not in a bus-master slot.
+.It "bge%d: no memory for jumbo buffers!"
+The driver failed to allocate memory for jumbo frames during
+initialization.
+.It "bge%d: watchdog timeout"
+The device has stopped responding to the network, or there is a problem with
+the network connection (cable).
+.El
+.Sh SEE ALSO
+.Xr arp 4 ,
+.Xr netintro 4 ,
+.Xr ng_ether 4 ,
+.Xr vlan 4 ,
+.Xr ifconfig 8
+.Sh HISTORY
+The
+.Nm
+device driver first appeared in
+.Fx 5.0 .
+.Sh AUTHORS
+The
+.Nm
+driver was written by
+.An Bill Paul Aq wpaul@windriver.com .