Updated serial console options.

1 files changed, 6 insertions, 15 deletions

diff --git a/share/examples/etc/make.conf b/share/examples/etc/make.conf
index 387d3c1..d935024 100644
--- a/share/examples/etc/make.conf
+++ b/share/examples/etc/make.conf
@@ -1,4 +1,4 @@
-# $Id: make.conf,v 1.47 1997/04/15 08:16:44 asami Exp $
+# $Id: make.conf,v 1.48 1997/05/03 19:58:39 andreas Exp $
 #
 # This file, if present, will be read by make (see /usr/share/mk/sys.mk).
 # It allows you to override macro definitions to make without changing
@@ -65,28 +65,19 @@
 #BOOTWAIT=30000
 #
 # By default, the system will always use the keyboard/video card as system
-# console.  However, the boot blocks may be configured to use a serial port
-# or probe the hardware to determine if the serial port or kbd/video should
-# be used.
+# console.  However, the boot blocks may be dynamically configured to use a
+# serial port in addition to or instead of the keyboard/video console.
 #
 # By default we use COM1 as our serial console port *if* we're going to use
 # a serial port as our console at all.  (0x3E8 = COM2)
 #
 #BOOT_COMCONSOLE_PORT=	0x3F8
 #
-# Uncomment the following line to test if a keyboard is present.  If the
-# keyboard isn't there, use the serial port as console.
+# The default serial console speed is 9600.  Set the speed to a larger value
+# for better interactive response.
 #
-#BOOT_PROBE_KEYBOARD=	true
+#BOOT_COMCONSOLE_SPEED=	115200
 #
-# Uncomment the following line to read the keyboard lock switch.  If the
-# keyboard is locked, use the serial port as console.
-#
-#BOOT_PROBE_KEYBOARD_LOCK= true
-#
-# Uncomment the following line to always force the use of a serial console.
-#
-#BOOT_FORCE_COMCONSOLE=	true
 #
 # By default, this points to /usr/X11R6 for XFree86 releases 3.0 or earlier.
 # If you have a XFree86 from before 3.0 that has the X distribution in