A number of places in the source tree still reference cuad.* after

sio(4) was deprecated by uart(4).

s/cuad/cuau/g/

PR:		docs/171533
Reviewed by:	imp
Approved by:	cperciva (implicit)
MFC after:	3 weeks

2 files changed, 7 insertions, 7 deletions

diff --git a/share/examples/ppp/ppp.conf.sample b/share/examples/ppp/ppp.conf.sample
index 7863eaa..2572644 100644
--- a/share/examples/ppp/ppp.conf.sample
+++ b/share/examples/ppp/ppp.conf.sample
@@ -29,7 +29,7 @@
 #
 default:
  set log Phase Chat LCP IPCP CCP tun command
- set device /dev/cuad1
+ set device /dev/cuau1
  set speed 115200
  set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT \
            OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
@@ -145,7 +145,7 @@ TA:
  set timeout 60 300	# The minimum charge period is 5 minutes, so don't
 			# hangup before then
 
- set device /dev/cuad0	# Or whatever
+ set device /dev/cuau0	# Or whatever
  set speed 115200	# Use as high a speed as possible
 
  enable dns		# Ask the peer what to put in resolv.conf
@@ -315,7 +315,7 @@ dodgy:
 dodgynet:
     set log Phase                               # Log link uptime
     allow mode auto                             # For autoconnect only
-    set device /dev/cuad1                       # Define modem device and speed
+    set device /dev/cuau1                       # Define modem device and speed
     set speed 115200
     deny lqr                                    # Don't support LQR
     set phone 0W1194                            # Remote system phone number,
@@ -472,7 +472,7 @@ radius-server:
 #
 direct-client:
  set dial
- set device /dev/cuad0
+ set device /dev/cuau0
  set sp 115200
  set timeout 900
  set lqrperiod 10
@@ -651,7 +651,7 @@ callback-server:
  set cbcp
  set log +cbcp
  set redial 3 1
- set device /dev/cuad0
+ set device /dev/cuau0
  set speed 115200
  set dial "TIMEOUT 10 \"\" AT OK-AT-OK ATDT\\T CONNECT"
 
@@ -678,7 +678,7 @@ callback-server-client-decides:
 #
 mloop:
  load loop
- set device /dev/cuad0 /dev/cuad1 /dev/cuad2   # Use any of these devices
+ set device /dev/cuau0 /dev/cuau1 /dev/cuau2   # Use any of these devices
  set mode interactive
  set mrru 1500
  set mru 1504                                  # Room for the MP header
diff --git a/share/examples/ppp/ppp.conf.span-isp b/share/examples/ppp/ppp.conf.span-isp
index 446cee3..11084de 100644
--- a/share/examples/ppp/ppp.conf.span-isp
+++ b/share/examples/ppp/ppp.conf.span-isp
@@ -104,7 +104,7 @@
 
 default:
   set speed 115200
-  set device /dev/cuad0 /dev/cuad1 /dev/cuad2 /dev/cuad3
+  set device /dev/cuau0 /dev/cuau1 /dev/cuau2 /dev/cuau3
   set dial "ABORT BUSY ABORT NO\\sCARRIER ABORT NO\\sDIAL\\sTONE TIMEOUT 4 \
             \"\" ATZ OK-ATZ-OK ATDT\\T TIMEOUT 60 CONNECT \\c \\n"
   set login