fbtab: Pulled down from Attic, fixed spaces to tabs.

make.conf: Pulled in the following changes that had been commited
to share/examples/etc:
----------------------------
revision 1.6
date: 1994/09/20 22:30:33;  author: adam;  state: Exp;  lines: +3 -3
BOOTWAIT example converted to milliseconds calibration
----------------------------
revision 1.4
date: 1994/09/19 21:35:28;  author: wollman;  state: Exp;  lines: +7 -1
Document NO_SHARED_LIBCC_INT.
----------------------------
revision 1.3
date: 1994/09/19 21:28:11;  author: wollman;  state: Exp;  lines: +12 -17
Install /etc from the same source as /usr/share/examples/etc (mostly).
----------------------------
revision 1.2
date: 1994/09/19 02:05:08;  author: ache;  state: Exp;  lines: +1 -11
Remove STARTUP_LOCALE, obsoleted now
----------------------------
revision 1.1
date: 1994/09/08 19:08:59;  author: jkh;  state: Exp;
Add a sample make.conf.  Also document the new X11BASE variable, and
expand some of the documentation for other entries.
Submitted by:   jkh
----------------------------

manpath.config: Pulled down from Attic, and merged share/examples/etc
changes.

rc: Pulled in the following change from share/examples/etc:
----------------------------
revision 1.2
date: 1994/09/19 23:13:37;  author: ache;  state: Exp;  lines: +1 -2
Remove warning about adjkerntz /var/run file
----------------------------

1 files changed, 24 insertions, 10 deletions

diff --git a/share/examples/etc/make.conf b/share/examples/etc/make.conf
index 6edbb41..c60f16c 100644
--- a/share/examples/etc/make.conf
+++ b/share/examples/etc/make.conf
@@ -1,22 +1,23 @@
-# $Id: make.conf,v 1.9 1994/09/19 02:02:55 ache Exp $
+# $Id: make.conf,v 1.6 1994/09/20 22:30:33 adam Exp $
 #
-# This file, if present, will be read by make (see /usr/share/mk/sys.mk)
-# It allows you to override macro definitions to make, without changing
-# in your source tree, or anything the source tree installs.
+# This file, if present, will be read by make (see /usr/share/mk/sys.mk).
+# It allows you to override macro definitions to make without changing
+# your source tree, or anything the source tree installs.
+#
+# This file must be in valid Makefile syntax.
 #
 # You have to find the things you can put here in the Makefiles and 
 # documentation of the source tree.
 #
-# This file must have a syntax as a Makefile.
-#
 # One, and probably the most common, use could be:
 #
 #CFLAGS= -O -m486 -pipe
 #	A lot of people report that -O2 works fine, but there are known
-#	bugs in gcc.  -pipe will almost always speed up compilation.
+#	bugs in gcc.  -pipe will almost always speed up compilation if you
+#	have enough memory.
 #
 #
-# Another useful entry could be:
+# Another useful entry is
 #
 #NOPROFILE=	no_way
 #	Avoid compiling profiled libraries
@@ -47,10 +48,10 @@
 #
 # How many times to check if a key has been pressed before giving up and
 # booting the default kernel. 0 actually means check once, but saves the
-# loop overhead. This value is approximately in 1/100ths of a second.
+# loop overhead. This value is approximately in milliseconds.
 #
 #BOOTWAIT=0
-#BOOTWAIT=3000
+#BOOTWAIT=30000
 #
 #
 # Allow 'cc' to generate all FPU codes. Do not use this if you intend to
@@ -59,3 +60,16 @@
 #
 #CCFPU=		yes
 #
+#
+# By default, this points to /usr/X386 for XFree86 releases 2.1 or earlier.
+# If you have XFree86 3.0 or later, you will probably want to uncomment this:
+#
+#X11BASE=	/usr/X11R6
+#
+#
+# Build `cc' using a static internals library, rather than the default
+# (dynamic) one.  This makes the compilers run faster, but at a cost of
+# about a megabyte of disk space for every language other than C.
+#
+#NO_SHARED_LIBCC_INT=	faster_cc
+#