Removed from the secure/lib/libcrypt area, because of the rewrite to how

the Makefile handles des support by just including the single .c file.

Reviewed by:	Mark Murray

9 files changed, 0 insertions, 950 deletions

diff --git a/secure/lib/libcrypt/README b/secure/lib/libcrypt/README
deleted file mode 100644
index b02ff5a1..0000000
--- a/secure/lib/libcrypt/README
+++ /dev/null
@@ -1,98 +0,0 @@
-
-	FreeSec - NetBSD libcrypt replacement
-
-	  David Burren <davidb@werj.com.au>
-	  Release 1.0, March 1994
-
-    Document ref: $Id$
-
-
-Description
-===========
-This library is a drop-in replacement for the libcrypt used in U.S. copies
-of NetBSD, duplicating that library's functionality.  A suite of verification
-and benchmark tools is provided.
-
-FreeSec 1.0 is an original implementation of the DES algorithm and the
-crypt(3) interfaces used in Unix-style operating systems.  It was produced
-in Australia and as such is not covered by U.S. export restrictions (at
-least for copies that remain outside the U.S.).
-
-
-History
-=======
-An earlier version of the FreeSec library was built using the UFC-crypt
-package that is distributed as part of the GNU library.  UFC-crypt did not
-support the des_cipher() or des_setkey() functions, nor the new-style
-crypt with long keys.  These were implemented in FreeSec 0.2, but at least
-one bug remained, where encryption would only succeed if either the salt
-or the plaintext was zero.  Because of its heritage FreeSec 0.2 was covered
-by the GNU Library Licence.
-
-FreeSec 1.0 is an original implementation by myself, and has been tested
-against the verification suite I'd been using with FreeSec 0.2 (this is not
-encumbered by any licence).  FreeSec 1.0 is covered by a Berkeley-style
-licence, which better fits into the *BSD hierarchy than the earlier GNU
-licence.
-
-
-Why should you use FreeSec?
-===========================
-FreeSec is intended as a replacement for the U.S.-only NetBSD libcrypt,
-to act as a baseline for encryption functionality.
-
-Some other packages (such as Eric Young's libdes package) are faster and
-more complete than FreeSec, but typically have different licencing
-arrangements.  While some applications will justify the use of these
-packages, the idea here is that everyone should have access to *at least*
-the functionality of FreeSec.
-
-
-Performance of FreeSec 1.0
-==========================
-I compare below the performance of three libcrypt implementations.  As can be
-seen, it's between the U.S. library and UFC-crypt.  While the performance of
-FreeSec 1.0 is good enough to keep me happy for now, I hope to improve it in
-future versions.  I was interested to note that while UFC-crypt is faster on
-a 386, hardware characteristics can have markedly different effects on each
-implementation.
-
-
-386DX40, 128k cache	| U.S. BSD	| FreeSec 1.0	| FreeSec 0.2
-CFLAGS=-O2		|		|		|
-========================+===============+===============+==================
-crypt (alternate keys)	| 317		| 341		| 395
-	crypt/sec	|		|		|
-------------------------+---------------+---------------+------------------
-crypt (constant key)	| 317		| 368		| 436
-	crypt/sec	|		|		|
-------------------------+---------------+---------------+------------------
-des_cipher( , , , 1)	| 6037		| 7459		| 3343
-	blocks/sec	|		|		|
-------------------------+---------------+---------------+------------------
-des_cipher( , , , 25)	| 8871		| 9627		| 15926
-	blocks/sec	|		|		|
-
-Notes:	The results tabled here are the average over 10 runs.
-	The entry/exit code for FreeSec 0.2's des_cipher() is particularly
-	inefficient, thus the anomalous result for single encryptions.
-
-
-As an experiment using a machine with a larger register set and an
-obscenely fast CPU, I obtained the following results:
-
-	60 MHz R4400		| FreeSec 1.0	| FreeSec 0.2
-	========================+=================================
-	crypt (alternate keys)	| 2545		| 2702
-		crypt/sec	|		|
-	------------------------+---------------------------------
-	crypt (constant key)	| 2852		| 2981
-		crypt/sec	|		|
-	------------------------+---------------------------------
-	des_cipher( , , , 1)	| 56443		| 21409
-		blocks/sec	|		|
-	------------------------+---------------------------------
-	des_cipher( , , , 25)	| 82531		| 18276
-		blocks/sec	|		|
-
-Obviously your mileage will vary with your hardware and your compiler...
diff --git a/secure/lib/libcrypt/README.FreeBSD b/secure/lib/libcrypt/README.FreeBSD
deleted file mode 100644
index 4a9260b..0000000
--- a/secure/lib/libcrypt/README.FreeBSD
+++ /dev/null
@@ -1,21 +0,0 @@
-$Id$
-
-This is FreeSec package for NetBSD,  unchanged for
-FreeBSD, except for the Makefile.
-
-FreeSec was written by David Burren <davidb@werj.com.au>
-
-A few bugs in the original FreeSec release have been fixed.
-
-In order to make libcrypt binaries exportable from the USA,
-only the symbol _crypt() (later to be changed to ___crypt())
-is exported from libcrypt.
-
-This source code was developed outside the USA, and can be
-obtained outside the USA.
-
-					Geoff Rehmet
-					Rhodes University
-					Grahamstown 
-					South Africa
-					8 August 1994
diff --git a/secure/lib/libcrypt/crypt-md5.c b/secure/lib/libcrypt/crypt-md5.c
deleted file mode 100644
index bdbf784..0000000
--- a/secure/lib/libcrypt/crypt-md5.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * ----------------------------------------------------------------------------
- * "THE BEER-WARE LICENSE" (Revision 42):
- * <phk@login.dknet.dk> wrote this file.  As long as you retain this notice you
- * can do whatever you want with this stuff. If we meet some day, and you think
- * this stuff is worth it, you can buy me a beer in return.   Poul-Henning Kamp
- * ----------------------------------------------------------------------------
- * 
- * This has had its entry point changed to crypt_md5 for use in 
- * a dual-personality (DES & MD5) environment)  -- MarkM - Nov 1995
- *
- * $Id$
- *
- */
-
-#if 0
-#if defined(LIBC_SCCS) && !defined(lint)
-static char rcsid[] = "$Header: /home/ncvs/src/secure/lib/libcrypt/crypt-md5.c,v 1.2 1997/01/14 06:25:50 jkh Exp $";
-#endif /* LIBC_SCCS and not lint */
-#endif
-
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <md5.h>
-
-static unsigned char itoa64[] =		/* 0 ... 63 => ascii - 64 */
-	"./0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz";
-
-static void
-to64(s, v, n)
-	char *s;
-	unsigned long v;
-	int n;
-{
-	while (--n >= 0) {
-		*s++ = itoa64[v&0x3f];
-		v >>= 6;
-	}
-}
-
-/*
- * UNIX password
- *
- * Use MD5 for what it is best at...
- */
-
-char *
-crypt_md5(pw, salt)
-	register const char *pw;
-	register const char *salt;
-{
-	static char	*magic = "$1$";	/*
-						 * This string is magic for
-						 * this algorithm.  Having
-						 * it this way, we can get
-						 * get better later on
-						 */
-	static char     passwd[120], *p;
-	static const char *sp,*ep;
-	unsigned char	final[16];
-	int sl,pl,i,j;
-	MD5_CTX	ctx,ctx1;
-	unsigned long l;
-
-	/* Refine the Salt first */
-	sp = salt;
-
-	/* If it starts with the magic string, then skip that */
-	if(!strncmp(sp,magic,strlen(magic)))
-		sp += strlen(magic);
-
-	/* It stops at the first '$', max 8 chars */
-	for(ep=sp;*ep && *ep != '$' && ep < (sp+8);ep++)
-		continue;
-
-	/* get the length of the true salt */
-	sl = ep - sp;
-
-	MD5Init(&ctx);
-
-	/* The password first, since that is what is most unknown */
-	MD5Update(&ctx,pw,strlen(pw));
-
-	/* Then our magic string */
-	MD5Update(&ctx,magic,strlen(magic));
-
-	/* Then the raw salt */
-	MD5Update(&ctx,sp,sl);
-
-	/* Then just as many characters of the MD5(pw,salt,pw) */
-	MD5Init(&ctx1);
-	MD5Update(&ctx1,pw,strlen(pw));
-	MD5Update(&ctx1,sp,sl);
-	MD5Update(&ctx1,pw,strlen(pw));
-	MD5Final(final,&ctx1);
-	for(pl = strlen(pw); pl > 0; pl -= 16)
-		MD5Update(&ctx,final,pl>16 ? 16 : pl);
-
-	/* Don't leave anything around in vm they could use. */
-	memset(final,0,sizeof final);
-
-	/* Then something really weird... */
-	for (j=0,i = strlen(pw); i ; i >>= 1)
-		if(i&1)
-		    MD5Update(&ctx, final+j, 1);
-		else
-		    MD5Update(&ctx, pw+j, 1);
-
-	/* Now make the output string */
-	strcpy(passwd,magic);
-	strncat(passwd,sp,sl);
-	strcat(passwd,"$");
-
-	MD5Final(final,&ctx);
-
-	/*
-	 * and now, just to make sure things don't run too fast
-	 * On a 60 Mhz Pentium this takes 34 msec, so you would
-	 * need 30 seconds to build a 1000 entry dictionary...
-	 */
-	for(i=0;i<1000;i++) {
-		MD5Init(&ctx1);
-		if(i & 1)
-			MD5Update(&ctx1,pw,strlen(pw));
-		else
-			MD5Update(&ctx1,final,16);
-
-		if(i % 3)
-			MD5Update(&ctx1,sp,sl);
-
-		if(i % 7)
-			MD5Update(&ctx1,pw,strlen(pw));
-
-		if(i & 1)
-			MD5Update(&ctx1,final,16);
-		else
-			MD5Update(&ctx1,pw,strlen(pw));
-		MD5Final(final,&ctx1);
-	}
-
-	p = passwd + strlen(passwd);
-
-	l = (final[ 0]<<16) | (final[ 6]<<8) | final[12]; to64(p,l,4); p += 4;
-	l = (final[ 1]<<16) | (final[ 7]<<8) | final[13]; to64(p,l,4); p += 4;
-	l = (final[ 2]<<16) | (final[ 8]<<8) | final[14]; to64(p,l,4); p += 4;
-	l = (final[ 3]<<16) | (final[ 9]<<8) | final[15]; to64(p,l,4); p += 4;
-	l = (final[ 4]<<16) | (final[10]<<8) | final[ 5]; to64(p,l,4); p += 4;
-	l =                    final[11]                ; to64(p,l,2); p += 2;
-	*p = '\0';
-
-	/* Don't leave anything around in vm they could use. */
-	memset(final,0,sizeof final);
-
-	return passwd;
-}
-
diff --git a/secure/lib/libcrypt/crypt.3 b/secure/lib/libcrypt/crypt.3
deleted file mode 100644
index 6ab0541..0000000
--- a/secure/lib/libcrypt/crypt.3
+++ /dev/null
@@ -1,159 +0,0 @@
-.\" FreeSec: libcrypt for NetBSD
-.\"
-.\" Copyright (c) 1994 David Burren
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 4. Neither the name of the author nor the names of other contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"	$Id$
-.\"
-.\" Manual page, using -mandoc macros
-.\"
-.Dd March 9, 1994
-.Dt CRYPT 3
-.Os "FreeSec 1.0"
-.Sh NAME
-.Nm crypt
-.Nd DES trapdoor encryption
-.Sh SYNOPSIS
-.Ft char
-.Fn *crypt "const char *key" "const char *setting"
-.Sh DESCRIPTION
-The
-.Fn crypt
-function performs password encryption, based on the
-.Tn NBS
-Data Encryption Standard (DES).
-Additional code has been added to deter key search attempts.
-The first argument to
-.Nm crypt
-is a
-.Dv null Ns -terminated
-string, typically a user's typed password.
-The second is in one of three forms:
-if it begins with an underscore (``_'') then an extended format is used
-in interpreting both the the key and the setting, as outlined below.
-if it begins with the string ``$1$'' then an exportable format is used.
-.Ss Extended crypt:
-.Pp
-The
-.Ar key
-is divided into groups of 8 characters (the last group is null-padded)
-and the low-order 7 bits of each each character (56 bits per group) are
-used to form the DES key as follows:
-the first group of 56 bits becomes the initial DES key.
-For each additional group, the XOR of the encryption of the current DES
-key with itself and the group bits becomes the next DES key.
-.Pp
-The setting is a 9-character array consisting of an underscore followed
-by 4 bytes of iteration count and 4 bytes of salt.
-These are encoded as printable characters, 6 bits per character,
-least significant character first.
-The values 0 to 63 are encoded as ``./0-9A-Za-z''.
-This allows 24 bits for both
-.Fa count
-and
-.Fa salt .
-.Ss "Traditional" crypt:
-.Pp
-The first 8 bytes of the key are null-padded, and the low-order 7 bits of
-each character is used to form the 56-bit
-.Tn DES
-key.
-.Pp
-The setting is a 2-character array of the ASCII-encoded salt.
-Thus only 12 bits of
-.Fa salt
-are used.
-.Fa count
-is set to 25.
-.Ss "FreeBSD" or "Exportable" crypt:
-.Pp
-If the salt begins with ``$1$'' then the freely exportable 
-.Tn MD5
-algorithm is used to calculate a hash value, from which the password string
-is generated. The
-.Tn MD5
-derived routine is designed to be time-consuming like the DES based version.
-.Ss Algorithm:
-.Pp
-The
-.Fa salt
-introduces disorder in the
-.Tn DES
-algorithm in one of 16777216 or 4096 possible ways
-(ie. with 24 or 12 bits: if bit
-.Em i
-of the
-.Ar salt
-is set, then bits
-.Em i
-and
-.Em i+24
-are swapped in the
-.Tn DES
-E-box output).
-.Pp
-The DES key is used to encrypt a 64-bit constant using
-.Ar count
-iterations of
-.Tn DES .
-The value returned is a
-.Dv null Ns -terminated
-string, 20 or 13 bytes (plus null) in length, consisting of the
-.Ar setting
-followed by the encoded 64-bit encryption.
-.Pp
-The function
-.Fn crypt
-returns a pointer to the encrypted value on success, and NULL on failure.
-.Sh SEE ALSO
-.Xr login 1 ,
-.Xr passwd 1 ,
-.Xr getpass 3 ,
-.Xr passwd 5
-.Sh BUGS
-The
-.Fn crypt
-function returns a pointer to static data, and subsequent calls to
-.Fn crypt
-will modify the same object.
-.Sh HISTORY
-A rotor-based
-.Fn crypt
-function appeared in
-.At v6 .
-The current style
-.Fn crypt
-first appeared in
-.At v7 .
-.Pp
-This library (FreeSec 1.0) was developed outside the United States of America
-as an unencumbered replacement for the U.S.-only NetBSD libcrypt encryption
-library.
-Users should be aware that this code (and programs staticly linked with it)
-may not be exported from the U.S., although it apparently can be imported.
-.Sh AUTHOR
-David Burren <davidb@werj.com.au>
diff --git a/secure/lib/libcrypt/test/Makefile b/secure/lib/libcrypt/test/Makefile
deleted file mode 100644
index a26e718..0000000
--- a/secure/lib/libcrypt/test/Makefile
+++ /dev/null
@@ -1,42 +0,0 @@
-#
-#	Hacked Makefile to compile and run the DES-certification program,
-#	but not install anything.
-#
-# $Id$
-#
-LIBCRYPT= $(.OBJDIR)/libdescrypt.a
-
-#CFLAGS+= -DHAVE_CRYPT16
-
-TARGETS=cert speedcrypt
-
-all: ${TARGETS}
-
-test: all testcrypt testspeed
-
-testcrypt: cert
-	@./cert -c
-
-testspeed: cryptspeed
-
-cryptspeed: speedcrypt
-	@./speedcrypt 30 1
-	@./speedcrypt 30 1
-	@./speedcrypt 30 0
-	@./speedcrypt 30 0
-
-cert: cert.c ${LIBCRYPT}
-	$(CC) $(CFLAGS) -o cert ${.CURDIR}/cert.c ${LIBCRYPT}
-
-speedcrypt: speedcrypt.c ${LIBCRYPT}
-	$(CC) $(CFLAGS) -o speedcrypt ${.CURDIR}/speedcrypt.c ${LIBCRYPT}
-
-
-clean:
-	rm -f ${TARGETS}
-
-install:
-
-obj:
-
-.include <bsd.prog.mk>
diff --git a/secure/lib/libcrypt/test/README b/secure/lib/libcrypt/test/README
deleted file mode 100644
index eb6b0be..0000000
--- a/secure/lib/libcrypt/test/README
+++ /dev/null
@@ -1,10 +0,0 @@
-This directory contains test programs to certify DES operation and to
-time the crypt() call (of curiosity value).
-
-Simply type `make test` to run the tests.
-
-The normal `make all` and `make install` that get done during library building
-and installation will build these programs BUT NOT INSTALL THEM.  After all,
-they're only for testing...
-
-- David Burren, January 1994
diff --git a/secure/lib/libcrypt/test/cert.c b/secure/lib/libcrypt/test/cert.c
deleted file mode 100644
index 4e207ad..0000000
--- a/secure/lib/libcrypt/test/cert.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * This DES validation program shipped with FreeSec is derived from that
- * shipped with UFC-crypt which is apparently derived from one distributed
- * with Phil Karns PD DES package.
- *
- * $Id$
- */
-
-#include <stdio.h>
-
-int totfails = 0;
-
-char *crypt();
-#ifdef HAVE_CRYPT16
-char *crypt16();
-#endif /* HAVE_CRYPT16 */
-
-
-static struct crypt_test {
-	char	*key, *setting, *answer;
-} crypt_tests[] = {
-	"foob",			"ar",		"arlEKn0OzVJn.",
-	"holyhooplasbatman!",	"_X.......",	"_X.......N89y2Z.e4WU",
-	"holyhooplasbatman!",	"_X...X...",	"_X...X...rSUDQ5Na/QM",
-	"holyhooplasbatman!",	"_XX..X...",	"_XX..X...P8vb9xU4JAk",
-	"holyhooplasbatman!",	"_XX..XX..",	"_XX..XX..JDs5IlGLqT2",
-	"holyhooplasbatman!",	"_XX..XXa.",	"_XX..XXa.bFVsOnCNh8Y",
-	"holyhooplasbatman!",	"_XXa.X...",	"_XXa.X...Ghsb3QKNaps",
-#ifdef TAKES_TOO_LONG_ON_SOME_CRYPTS
-	"holyhooplasbatman!",	"_arararar",	"_ararararNGMzvpNjeCc",
-#endif
-	NULL, NULL, NULL,
-};
-
-
-static struct crypt_test crypt16_tests[] = {
-	"foob",			"ar",		"arxo23jZDD5AYbHbqoy9Dalg",
-	"holyhooplasbatman!",	"ar",		"arU5FRLJ3kxIoedlmyrOelEw",
-	NULL, NULL, NULL
-};
-
-
-void good_bye()
-{
-  if(totfails == 0) {
-    printf(" Passed validation\n");
-    exit(0);
-  } else {
-    printf(" %d failures during validation!!!\n", totfails);
-    exit(1);
-  }
-}
-
-
-void put8(cp)
-char *cp;
-{
-	int i,j,t;
-
-	for(i = 0; i < 8; i++){
-		t = 0;
-		for(j = 0; j < 8; j++)
-			t = t << 1 | *cp++;
-		printf("%02x", t);
-	}
-}
-
-
-void print_bits(bits)
-unsigned char *bits;
-{
-	int	i;
-
-	for (i = 0; i < 8; i++) {
-		printf("%02x", bits[i]);
-	}
-}
-
-
-int parse_line(buff, salt, key, plain, answer)
-char *buff;
-long *salt;
-char *key, *plain, *answer;
-{
-	char *ptr1, *ptr2;
-	int val;
-	int i,j,t;
-
-	/*
-	 * Extract salt
-	 */
-	if (sscanf(buff, "%lu", salt) != 1)
-		return(-1);
-	for (ptr2 = buff; *ptr2 && !isspace(*ptr2); ptr2++)
-		;
-
-	/*
-	 * Extract key
-	 */
-	for (ptr1 = ptr2; *ptr1 && isspace(*ptr1); ptr1++)
-		;
-	for (ptr2 = ptr1; *ptr2 && !isspace(*ptr2); ptr2++)
-		;
-	if (ptr2 - ptr1 != 16)
-		return(-1);
-	for (i = 0; i < 8; i++){
-		if (sscanf(ptr1 + 2*i, "%2x", &t) != 1)
-			return(-2);
-		for (j = 0; j < 8; j++)
-			*key++ = (t & 1 << (7 - j)) != 0;
-	}
-
-	/*
-	 * Extract plain
-	 */
-	for (ptr1 = ptr2; *ptr1 && isspace(*ptr1); ptr1++)
-		;
-	for (ptr2 = ptr1; *ptr2 && !isspace(*ptr2); ptr2++)
-		;
-	if (ptr2 - ptr1 != 16)
-		return(-1);
-	for (i = 0; i < 8; i++){
-		if (sscanf(ptr1 + 2*i, "%2x", &t) != 1)
-			return(-2);
-		for (j = 0; j < 8; j++)
-			*plain++ = (t & 1 << (7 - j)) != 0;
-	}
-
-	/*
-	 * Extract answer
-	 */
-	for (ptr1 = ptr2; *ptr1 && isspace(*ptr1); ptr1++)
-		;
-	for (ptr2 = ptr1; *ptr2 && !isspace(*ptr2); ptr2++)
-		;
-	if (ptr2 - ptr1 != 16)
-		return(-1);
-	for (i = 0; i < 8; i++){
-		if (sscanf(ptr1 + 2*i, "%2x", &t) != 1)
-			return(-2);
-		for (j = 0; j < 8; j++)
-			*answer++ = (t & 1 << (7 - j)) != 0;
-	}
-	return(0);
-}
-
-void bytes_to_bits(bytes, bits)
-char *bytes;
-unsigned char *bits;
-{
-	int	i, j;
-
-	for (i = 0; i < 8; i++) {
-		bits[i] = 0;
-		for (j = 0; j < 8; j++) {
-			bits[i] |= (bytes[i*8+j] & 1) << (7 - j);
-		}
-	}
-}
-
-
-
-/*
- *	Test the old-style crypt(), the new-style crypt(), and crypt16().
- */
-void test_crypt()
-{
-	char	*result;
-	struct crypt_test	*p;
-
-	printf("Testing crypt() family\n");
-
-	for (p = crypt_tests; p->key; p++) {
-		printf(" crypt(\"%s\", \"%s\"), \"%s\" expected",
-			p->key, p->setting, p->answer);
-		fflush(stdout);
-		result = crypt(p->key, p->setting);
-		if(!strcmp(result, p->answer)) {
-			printf(", OK\n");
-		} else {
-			printf("\n  failed (\"%s\")\n", result);
-			totfails++;
-		}
-	}
-
-#ifdef HAVE_CRYPT16
-	for (p = crypt16_tests; p->key; p++) {
-		printf(" crypt16(\"%s\", \"%s\"), \"%s\" expected",
-			p->key, p->setting, p->answer);
-		fflush(stdout);
-		result = crypt16(p->key, p->setting);
-		if(!strcmp(result, p->answer)) {
-			printf(", OK\n");
-		} else {
-			printf("\n  failed (\"%s\")\n", result);
-			totfails++;
-		}
-	}
-#endif /* HAVE_CRYPT16 */
-}
-
-main(argc, argv)
-int argc;
-char *argv[];
-{
-	test_crypt();
-	good_bye();
-}
diff --git a/secure/lib/libcrypt/test/cert.input b/secure/lib/libcrypt/test/cert.input
deleted file mode 100644
index db1749e..0000000
--- a/secure/lib/libcrypt/test/cert.input
+++ /dev/null
@@ -1,179 +0,0 @@
-# $Id$
-#
-# Salt, key, plaintext, ciphertext
-#
-0 0101010101010101 95f8a5e5dd31d900 8000000000000000
-0 0101010101010101 dd7f121ca5015619 4000000000000000
-0 0101010101010101 2e8653104f3834ea 2000000000000000
-0 0101010101010101 4bd388ff6cd81d4f 1000000000000000
-0 0101010101010101 20b9e767b2fb1456 0800000000000000
-0 0101010101010101 55579380d77138ef 0400000000000000
-0 0101010101010101 6cc5defaaf04512f 0200000000000000
-0 0101010101010101 0d9f279ba5d87260 0100000000000000
-0 0101010101010101 d9031b0271bd5a0a 0080000000000000
-0 0101010101010101 424250b37c3dd951 0040000000000000
-0 0101010101010101 b8061b7ecd9a21e5 0020000000000000
-0 0101010101010101 f15d0f286b65bd28 0010000000000000
-0 0101010101010101 add0cc8d6e5deba1 0008000000000000
-0 0101010101010101 e6d5f82752ad63d1 0004000000000000
-0 0101010101010101 ecbfe3bd3f591a5e 0002000000000000
-0 0101010101010101 f356834379d165cd 0001000000000000
-0 0101010101010101 2b9f982f20037fa9 0000800000000000
-0 0101010101010101 889de068a16f0be6 0000400000000000
-0 0101010101010101 e19e275d846a1298 0000200000000000
-0 0101010101010101 329a8ed523d71aec 0000100000000000
-0 0101010101010101 e7fce22557d23c97 0000080000000000
-0 0101010101010101 12a9f5817ff2d65d 0000040000000000
-0 0101010101010101 a484c3ad38dc9c19 0000020000000000
-0 0101010101010101 fbe00a8a1ef8ad72 0000010000000000
-0 0101010101010101 750d079407521363 0000008000000000
-0 0101010101010101 64feed9c724c2faf 0000004000000000
-0 0101010101010101 f02b263b328e2b60 0000002000000000
-0 0101010101010101 9d64555a9a10b852 0000001000000000
-0 0101010101010101 d106ff0bed5255d7 0000000800000000
-0 0101010101010101 e1652c6b138c64a5 0000000400000000
-0 0101010101010101 e428581186ec8f46 0000000200000000
-0 0101010101010101 aeb5f5ede22d1a36 0000000100000000
-0 0101010101010101 e943d7568aec0c5c 0000000080000000
-0 0101010101010101 df98c8276f54b04b 0000000040000000
-0 0101010101010101 b160e4680f6c696f 0000000020000000
-0 0101010101010101 fa0752b07d9c4ab8 0000000010000000
-0 0101010101010101 ca3a2b036dbc8502 0000000008000000
-0 0101010101010101 5e0905517bb59bcf 0000000004000000
-0 0101010101010101 814eeb3b91d90726 0000000002000000
-0 0101010101010101 4d49db1532919c9f 0000000001000000
-0 0101010101010101 25eb5fc3f8cf0621 0000000000800000
-0 0101010101010101 ab6a20c0620d1c6f 0000000000400000
-0 0101010101010101 79e90dbc98f92cca 0000000000200000
-0 0101010101010101 866ecedd8072bb0e 0000000000100000
-0 0101010101010101 8b54536f2f3e64a8 0000000000080000
-0 0101010101010101 ea51d3975595b86b 0000000000040000
-0 0101010101010101 caffc6ac4542de31 0000000000020000
-0 0101010101010101 8dd45a2ddf90796c 0000000000010000
-0 0101010101010101 1029d55e880ec2d0 0000000000008000
-0 0101010101010101 5d86cb23639dbea9 0000000000004000
-0 0101010101010101 1d1ca853ae7c0c5f 0000000000002000
-0 0101010101010101 ce332329248f3228 0000000000001000
-0 0101010101010101 8405d1abe24fb942 0000000000000800
-0 0101010101010101 e643d78090ca4207 0000000000000400
-0 0101010101010101 48221b9937748a23 0000000000000200
-0 0101010101010101 dd7c0bbd61fafd54 0000000000000100
-0 0101010101010101 2fbc291a570db5c4 0000000000000080
-0 0101010101010101 e07c30d7e4e26e12 0000000000000040
-0 0101010101010101 0953e2258e8e90a1 0000000000000020
-0 0101010101010101 5b711bc4ceebf2ee 0000000000000010
-0 0101010101010101 cc083f1e6d9e85f6 0000000000000008
-0 0101010101010101 d2fd8867d50d2dfe 0000000000000004
-0 0101010101010101 06e7ea22ce92708f 0000000000000002
-0 0101010101010101 166b40b44aba4bd6 0000000000000001
-0 8001010101010101 0000000000000000 95a8d72813daa94d
-0 4001010101010101 0000000000000000 0eec1487dd8c26d5
-0 2001010101010101 0000000000000000 7ad16ffb79c45926
-0 1001010101010101 0000000000000000 d3746294ca6a6cf3
-0 0801010101010101 0000000000000000 809f5f873c1fd761
-0 0401010101010101 0000000000000000 c02faffec989d1fc
-0 0201010101010101 0000000000000000 4615aa1d33e72f10
-0 0180010101010101 0000000000000000 2055123350c00858
-0 0140010101010101 0000000000000000 df3b99d6577397c8
-0 0120010101010101 0000000000000000 31fe17369b5288c9
-0 0110010101010101 0000000000000000 dfdd3cc64dae1642
-0 0108010101010101 0000000000000000 178c83ce2b399d94
-0 0104010101010101 0000000000000000 50f636324a9b7f80
-0 0102010101010101 0000000000000000 a8468ee3bc18f06d
-0 0101800101010101 0000000000000000 a2dc9e92fd3cde92
-0 0101400101010101 0000000000000000 cac09f797d031287
-0 0101200101010101 0000000000000000 90ba680b22aeb525
-0 0101100101010101 0000000000000000 ce7a24f350e280b6
-0 0101080101010101 0000000000000000 882bff0aa01a0b87
-0 0101040101010101 0000000000000000 25610288924511c2
-0 0101020101010101 0000000000000000 c71516c29c75d170
-0 0101018001010101 0000000000000000 5199c29a52c9f059
-0 0101014001010101 0000000000000000 c22f0a294a71f29f
-0 0101012001010101 0000000000000000 ee371483714c02ea
-0 0101011001010101 0000000000000000 a81fbd448f9e522f
-0 0101010801010101 0000000000000000 4f644c92e192dfed
-0 0101010401010101 0000000000000000 1afa9a66a6df92ae
-0 0101010201010101 0000000000000000 b3c1cc715cb879d8
-0 0101010180010101 0000000000000000 19d032e64ab0bd8b
-0 0101010140010101 0000000000000000 3cfaa7a7dc8720dc
-0 0101010120010101 0000000000000000 b7265f7f447ac6f3
-0 0101010110010101 0000000000000000 9db73b3c0d163f54
-0 0101010108010101 0000000000000000 8181b65babf4a975
-0 0101010104010101 0000000000000000 93c9b64042eaa240
-0 0101010102010101 0000000000000000 5570530829705592
-0 0101010101800101 0000000000000000 8638809e878787a0
-0 0101010101400101 0000000000000000 41b9a79af79ac208
-0 0101010101200101 0000000000000000 7a9be42f2009a892
-0 0101010101100101 0000000000000000 29038d56ba6d2745
-0 0101010101080101 0000000000000000 5495c6abf1e5df51
-0 0101010101040101 0000000000000000 ae13dbd561488933
-0 0101010101020101 0000000000000000 024d1ffa8904e389
-0 0101010101018001 0000000000000000 d1399712f99bf02e
-0 0101010101014001 0000000000000000 14c1d7c1cffec79e
-0 0101010101012001 0000000000000000 1de5279dae3bed6f
-0 0101010101011001 0000000000000000 e941a33f85501303
-0 0101010101010801 0000000000000000 da99dbbc9a03f379
-0 0101010101010401 0000000000000000 b7fc92f91d8e92e9
-0 0101010101010201 0000000000000000 ae8e5caa3ca04e85
-0 0101010101010180 0000000000000000 9cc62df43b6eed74
-0 0101010101010140 0000000000000000 d863dbb5c59a91a0
-0 0101010101010120 0000000000000000 a1ab2190545b91d7
-0 0101010101010110 0000000000000000 0875041e64c570f7
-0 0101010101010108 0000000000000000 5a594528bebef1cc
-0 0101010101010104 0000000000000000 fcdb3291de21f0c0
-0 0101010101010102 0000000000000000 869efd7f9f265a09
-0 1046913489980131 0000000000000000 88d55e54f54c97b4
-0 1007103489988020 0000000000000000 0c0cc00c83ea48fd
-0 10071034c8980120 0000000000000000 83bc8ef3a6570183
-0 1046103489988020 0000000000000000 df725dcad94ea2e9
-0 1086911519190101 0000000000000000 e652b53b550be8b0
-0 1086911519580101 0000000000000000 af527120c485cbb0
-0 5107b01519580101 0000000000000000 0f04ce393db926d5
-0 1007b01519190101 0000000000000000 c9f00ffc74079067
-0 3107915498080101 0000000000000000 7cfd82a593252b4e
-0 3107919498080101 0000000000000000 cb49a2f9e91363e3
-0 10079115b9080140 0000000000000000 00b588be70d23f56
-0 3107911598080140 0000000000000000 406a9a6ab43399ae
-0 1007d01589980101 0000000000000000 6cb773611dca9ada
-0 9107911589980101 0000000000000000 67fd21c17dbb5d70
-0 9107d01589190101 0000000000000000 9592cb4110430787
-0 1007d01598980120 0000000000000000 a6b7ff68a318ddd3
-0 1007940498190101 0000000000000000 4d102196c914ca16
-0 0107910491190401 0000000000000000 2dfa9f4573594965
-0 0107910491190101 0000000000000000 b46604816c0e0774
-0 0107940491190401 0000000000000000 6e7e6221a4f34e87
-0 19079210981a0101 0000000000000000 aa85e74643233199
-0 1007911998190801 0000000000000000 2e5a19db4d1962d6
-0 10079119981a0801 0000000000000000 23a866a809d30894
-0 1007921098190101 0000000000000000 d812d961f017d320
-0 100791159819010b 0000000000000000 055605816e58608f
-0 1004801598190101 0000000000000000 abd88e8b1b7716f1
-0 1004801598190102 0000000000000000 537ac95be69da1e1
-0 1004801598190108 0000000000000000 aed0f6ae3c25cdd8
-0 1002911598100104 0000000000000000 b3e35a5ee53e7b8d
-0 1002911598190104 0000000000000000 61c79c71921a2ef8
-0 1002911598100201 0000000000000000 e2f5728f0995013c
-0 1002911698100101 0000000000000000 1aeac39a61f0a464
-0 7ca110454a1a6e57 01a1d6d039776742 690f5b0d9a26939b
-0 0131d9619dc1376e 5cd54ca83def57da 7a389d10354bd271
-0 07a1133e4a0b2686 0248d43806f67172 868ebb51cab4599a
-0 3849674c2602319e 51454b582ddf440a 7178876e01f19b2a
-0 04b915ba43feb5b6 42fd443059577fa2 af37fb421f8c4095
-0 0113b970fd34f2ce 059b5e0851cf143a 86a560f10ec6d85b
-0 0170f175468fb5e6 0756d8e0774761d2 0cd3da020021dc09
-0 43297fad38e373fe 762514b829bf486a ea676b2cb7db2b7a
-0 07a7137045da2a16 3bdd119049372802 dfd64a815caf1a0f
-0 04689104c2fd3b2f 26955f6835af609a 5c513c9c4886c088
-0 37d06bb516cb7546 164d5e404f275232 0a2aeeae3ff4ab77
-0 1f08260d1ac2465e 6b056e18759f5cca ef1bf03e5dfa575a
-0 584023641aba6176 004bd6ef09176062 88bf0db6d70dee56
-0 025816164629b007 480d39006ee762f2 a1f9915541020b56
-0 49793ebc79b3258f 437540c8698f3cfa 6fbf1cafcffd0556
-0 4fb05e1515ab73a7 072d43a077075292 2f22e49bab7ca1ac
-0 49e95d6d4ca229bf 02fe55778117f12a 5a6b612cc26cce4a
-0 018310dc409b26d6 1d9d5c5018f728c2 5f4c038ed12b2e41
-0 1c587f1c13924fef 305532286d6f295a 63fac0d034d9f793
-1 1c587f1c13924fef 305532286d6f295a 400d307ca24fee60
-57 1c587f1c13924fef 305532286d6f295a 28b568f40e7d43ae
-1 8001010101010101 0000000000000000 f501029f268e45dc
-0 1c587f1c13924fef 305532286d6f295a 63fac0d034d9f793
diff --git a/secure/lib/libcrypt/test/speedcrypt.c b/secure/lib/libcrypt/test/speedcrypt.c
deleted file mode 100644
index f7507fd..0000000
--- a/secure/lib/libcrypt/test/speedcrypt.c
+++ /dev/null
@@ -1,76 +0,0 @@
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-#include <signal.h>
-#include <stdio.h>
-
-int		keep_going, count, alternate, seconds;
-struct rusage	prior, now;
-
-void
-finish()
-{
-	keep_going = 0;
-}
-
-
-main(int argc, char *argv[])
-{
-	struct itimerval itv;
-	u_long		msecs, key1[8], key2[8];
-	char		*k1, *k2;
-
-	if (argc < 2 || sscanf(argv[1], "%d", &seconds) != 1)
-		seconds = 20;
-
-	if (argc < 3 || sscanf(argv[2], "%d", &alternate) != 1)
-		alternate = 0;
-
-	printf ("Running crypt%s for %d seconds of vtime...\n",
-		alternate ? " with alternate keys" : "", seconds);
-
-	bzero(&itv, sizeof (itv));
-	signal (SIGVTALRM, finish);
-	itv.it_value.tv_sec = seconds;
-	itv.it_value.tv_usec = 0;
-	setitimer(ITIMER_VIRTUAL, &itv, NULL);
-
-	keep_going = 1;
-	if (getrusage(0, &prior) < 0) {
-		perror("getrusage");
-		exit(1);
-	}
-
-	k1 = (char *) key1;
-	k2 = (char *) key2;
-	strcpy(k1, "fredfredfredfredfred");
-	strcpy(k2, "joejoejoejoejoejoejo");
-
-	if (alternate)
-		for (count = 0; keep_going; count++)
-		{
-#if defined(LONGCRYPT)
-			crypt((count & 1) ? k1 : k2, "_ara.X...");
-#else
-			crypt((count & 1) ? k1 : k2, "eek");
-#endif
-		}
-	else
-		for (count = 0; keep_going; count++)
-		{
-#if defined(LONGCRYPT)
-			crypt(k1, "_ara.X...");
-#else
-			crypt(k1, "eek");
-#endif
-		}
-
-	if (getrusage(0, &now) < 0) {
-		perror("getrusage");
-		exit(1);
-	}
-	msecs = (now.ru_utime.tv_sec - prior.ru_utime.tv_sec) * 1000
-	      + (now.ru_utime.tv_usec - prior.ru_utime.tv_usec) / 1000;
-	printf ("\tDid %d crypt()s per second.\n", 1000 * count / msecs);
-	exit(0);
-}