Add the definition for the CFAUTOTERM bit in the aic78xx SEEPROM.

Add auto-termination support as well as support for setting the high byte
termination.  Booting with '-v' will display the settings that the driver
chose.  If you stick narrow devices onto the external wide port, you had
better make sure that your converter cable terminates the bus, you have a
wide device on there that terminates the bus, or you manually set the
termination properly in SCSI-Select instead of using "Automatic".  The
code will get the setting right regardless if you *don't* have internal
wide devices in this type of configuration.  Unfortunatly this is a limitation
of the design of the Adaptec cards.

0 files changed, 0 insertions, 0 deletions