Converted 'vmunix' to 'kernel'.

5 files changed, 23 insertions, 23 deletions

diff --git a/sbin/reboot/boot_hp300.8 b/sbin/reboot/boot_hp300.8
index 0303542..1d3a4f6 100644
--- a/sbin/reboot/boot_hp300.8
+++ b/sbin/reboot/boot_hp300.8
@@ -64,7 +64,7 @@ This
 .Em boot
 program
 finds the corresponding file on the given device 
-.Pf ( Ar vmunix
+.Pf ( Ar kernel
 by default),
 loads that file into memory,
 and starts the program at the entry address specified in the program header.
@@ -94,7 +94,7 @@ specifiers.
 For example,
 to boot from the `a' file system of unit 0 on HP-IB 2,
 type
-.Ql rd(16, 0)vmunix
+.Ql rd(16, 0)kernel
 to the boot prompt.
 For tapes, the minor device number gives a file offset.
 .Pp
@@ -103,7 +103,7 @@ In an emergency, the bootstrap methods described in the paper
 can be used to boot from a distribution tape.
 .Sh FILES
 .Bl -tag -width /usr/mdec/installboot -compact
-.It Pa /vmunix
+.It Pa /kernel
 system code
 .It Pa /usr/mdec/bootrd
 .Tn LIF
diff --git a/sbin/reboot/boot_i386.8 b/sbin/reboot/boot_i386.8
index 0dc3e0b..24a4644 100644
--- a/sbin/reboot/boot_i386.8
+++ b/sbin/reboot/boot_i386.8
@@ -54,7 +54,7 @@ clones attempt to boot the floppy disk drive A (otherwise known as drive
 0) first, and failing that, attempt to boot the hard disk C (otherwise
 known as hard disk controller 1, drive 0).
 The automatic boot will attempt to load
-.Pa vmunix
+.Pa kernel
 from partition A of either the floppy or the hard disk.
 This boot may be aborted by typing any character on the keyboard repeatedly
 (four or five times at least) during the operating system load phase, after
@@ -99,9 +99,9 @@ fd	5 1/4" or 3 1/2" High density floppies
 For example,
 to boot from a file system which starts at cylinder 0
 of unit 0 of an IDE disk, type
-.Dq Li wd0a:vmunix
+.Dq Li wd0a:kernel
 to the boot prompt;
-.Dq Li fd0a:vmunix
+.Dq Li fd0a:kernel
 would specify a 3 1/2" floppy drive 0 .
 .Pp
 In an emergency, the bootstrap methods described in the paper
@@ -109,8 +109,8 @@ In an emergency, the bootstrap methods described in the paper
 can be used
 to boot from a distribution tape.
 .Sh FILES
-.Bl -tag -width /vmunixxx -compact
-.It Pa /vmunix
+.Bl -tag -width /kernelxx -compact
+.It Pa /kernel
 system code
 .It Pa /boot
 system bootstrap
diff --git a/sbin/reboot/boot_sparc.8 b/sbin/reboot/boot_sparc.8
index 72e57b0..c3499bc 100644
--- a/sbin/reboot/boot_sparc.8
+++ b/sbin/reboot/boot_sparc.8
@@ -55,7 +55,7 @@ and unless this fails, the system will resume multi-user operations.
 The SPARC system currently uses the SunOS bootstrap loaders.
 This will be changed in a future version of the system.
 The SunOS boot will attempt to load
-.Pa vmunix
+.Pa kernel
 from partition A of the boot device,
 which must currently be an ``sd'' disk.
 .Pp
@@ -69,8 +69,8 @@ Here it waits for a kernel debugger connect; see
 .Xr kgdb 8 .
 Other flags are currently ignored.
 .Sh FILES
-.Bl -tag -width /vmunixxx -compact
-.It Pa /vmunix
+.Bl -tag -width /kernelxx -compact
+.It Pa /kernel
 system code
 .It Pa /boot
 system bootstrap
diff --git a/sbin/reboot/boot_tahoe.8 b/sbin/reboot/boot_tahoe.8
index 01c7f81..52b2047 100644
--- a/sbin/reboot/boot_tahoe.8
+++ b/sbin/reboot/boot_tahoe.8
@@ -122,9 +122,9 @@ to boot from a file system which starts at cylinder 0
 of unit 0 of an
 .Tn SMD-E
 disk, type
-.Ql dk(0,0)vmunix
+.Ql dk(0,0)kernel
 to the boot prompt;
-.Ql dk(2,1,0)vmunix
+.Ql dk(2,1,0)kernel
 would specify drive 1 on
 .Tn SMD-E
 controller 2.
@@ -134,8 +134,8 @@ In an emergency, the bootstrap methods described in the paper
 can be used
 to boot from a distribution tape.
 .Sh FILES
-.Bl -tag -width /vmunix -compact
-.It Pa /vmunix
+.Bl -tag -width /kernel -compact
+.It Pa /kernel
 system code
 .It Pa /boot
 system bootstrap
diff --git a/sbin/reboot/boot_vax.8 b/sbin/reboot/boot_vax.8
index dce6b69..37e9cbe 100644
--- a/sbin/reboot/boot_vax.8
+++ b/sbin/reboot/boot_vax.8
@@ -199,7 +199,7 @@ On any processor, the
 .Em boot
 program
 finds the corresponding file on the given device 
-.Pf ( Pa vmunix
+.Pf ( Pa kernel
 by default), loads that file
 into memory location zero, and starts the program at the entry address
 specified in the program header (after clearing off the high bit
@@ -257,26 +257,26 @@ to boot from a file system which starts at cylinder 0
 of unit 0 of a
 .Tn MASSBUS
 disk, type
-.Ql hp(0,0)vmunix
+.Ql hp(0,0)kernel
 to the boot prompt;
-.Ql hp(2,0,1,0)vmunix
+.Ql hp(2,0,1,0)kernel
 would specify drive 1 on
 .Tn MASSBUS
 adaptor 2;
-.Ql up(0,0)vmunix
+.Ql up(0,0)kernel
 would specify a
 .Tn UNIBUS
 drive,
-.Ql hk(0,0)vmunix
+.Ql hk(0,0)kernel
 would specify
 an RK07 disk drive,
-.Ql ra(1,0,0,0)vmunix
+.Ql ra(1,0,0,0)kernel
 would specify a
 .Tn UDA50
 disk drive on a second
 .Tn UNIBUS ,
 and
-.Ql rb(0,0)vmunix
+.Ql rb(0,0)kernel
 would specify a
 disk on a 730
 .Tn IDC .
@@ -299,7 +299,7 @@ In an emergency, the bootstrap methods described in the paper
 can be used to boot from a distribution tape.
 .Sh FILES
 .Bl -tag -width /usr/mdec/xxboot -compact
-.It Pa /vmunix
+.It Pa /kernel
 system code
 .It Pa /boot
 system bootstrap