s/filesystem/file system/g as discussed on -developers

3 files changed, 28 insertions, 28 deletions

diff --git a/sbin/disklabel/disklabel.5 b/sbin/disklabel/disklabel.5
index 4b44c0e..2f30a92 100644
--- a/sbin/disklabel/disklabel.5
+++ b/sbin/disklabel/disklabel.5
@@ -54,13 +54,13 @@ and may be changed later with the
 program.
 This information is used by the system disk driver and by the bootstrap
 program to determine how to program the drive
-and where to find the filesystems on the disk partitions.
-Additional information is used by the filesystem in order
-to use the disk most efficiently and to locate important filesystem information.
+and where to find the file systems on the disk partitions.
+Additional information is used by the file system in order
+to use the disk most efficiently and to locate important file system information.
 The description of each partition contains an identifier for the partition
-type (standard filesystem, swap area, etc.).
-The filesystem updates the in-core copy of the label if it contains
-incomplete information about the filesystem.
+type (standard file system, swap area, etc.).
+The file system updates the in-core copy of the label if it contains
+incomplete information about the file system.
 .Pp
 The label is located in sector number
 .Dv LABELSECTOR
@@ -122,7 +122,7 @@ is
 
 /*
  * Each disk has a label which includes information about the hardware
- * disk geometry, filesystem partitions, and drive specific information.
+ * disk geometry, file system partitions, and drive specific information.
  * The label is in block 0 or 1, possibly offset from the beginning
  * to leave room for a bootstrap, etc.
  */
@@ -216,16 +216,16 @@ struct disklabel {
 	u_int32_t d_magic2;		/* the magic number (again) */
 	u_int16_t d_checksum;		/* xor of data incl. partitions */
 
-			/* filesystem and partition information: */
+			/* file system and partition information: */
 	u_int16_t d_npartitions;	/* number of partitions in following */
 	u_int32_t d_bbsize;		/* size of boot area at sn0, bytes */
 	u_int32_t d_sbsize;		/* max size of fs superblock, bytes */
 	struct	partition {		/* the partition table */
 		u_int32_t p_size;	/* number of sectors in partition */
 		u_int32_t p_offset;	/* starting sector */
-		u_int32_t p_fsize;	/* filesystem basic fragment size */
-		u_int8_t p_fstype;	/* filesystem type, see below */
-		u_int8_t p_frag;	/* filesystem fragments per block */
+		u_int32_t p_fsize;	/* file system basic fragment size */
+		u_int8_t p_fstype;	/* file system type, see below */
+		u_int8_t p_frag;	/* file system fragments per block */
 		union {
 			u_int16_t cpg;	/* UFS: FS cylinders per group */
 			u_int16_t sgs;	/* LFS: FS segment shift */
@@ -288,7 +288,7 @@ static char *dktypenames[] = {
 
 /*
  * Filesystem type and version.
- * Used to interpret other filesystem-specific
+ * Used to interpret other file system-specific
  * per-partition information.
  */
 #define	FS_UNUSED	0		/* unused */
@@ -298,11 +298,11 @@ static char *dktypenames[] = {
 #define	FS_SYSV		4		/* System V */
 #define	FS_V71K		5		/* V7 with 1K blocks (4.1, 2.9) */
 #define	FS_V8		6		/* Eighth Edition, 4K blocks */
-#define	FS_BSDFFS	7		/* 4.2BSD fast filesystem */
-#define	FS_MSDOS	8		/* MSDOS filesystem */
-#define	FS_BSDLFS	9		/* 4.4BSD log-structured filesystem */
+#define	FS_BSDFFS	7		/* 4.2BSD fast file system */
+#define	FS_MSDOS	8		/* MSDOS file system */
+#define	FS_BSDLFS	9		/* 4.4BSD log-structured file system */
 #define	FS_OTHER	10		/* in use, but unknown/unsupported */
-#define	FS_HPFS		11		/* OS/2 high-performance filesystem */
+#define	FS_HPFS		11		/* OS/2 high-performance file system */
 #define	FS_ISO9660	12		/* ISO 9660, normally CD-ROM */
 #define	FS_BOOT		13		/* partition contains bootstrap */
 #define	FS_VINUM	14		/* Vinum drive */
diff --git a/sbin/disklabel/disklabel.8 b/sbin/disklabel/disklabel.8
index faae777..32ed01c 100644
--- a/sbin/disklabel/disklabel.8
+++ b/sbin/disklabel/disklabel.8
@@ -473,11 +473,11 @@ they can be defined later using
 .It
 Finally use
 .Xr newfs 8
-to create a filesystem on the new partition.
+to create a file system on the new partition.
 A typical partitioning scheme would be to have an
 .Dq a
 partition
-of approximately 128MB to hold the root filesystem, a
+of approximately 128MB to hold the root file system, a
 .Dq b
 partition for
 swap, a
@@ -633,7 +633,7 @@ will be interpreted as an offset of 0.
 .It fstype
 describes the purpose of the partition.  The example shows all currently used
 partition types.
-For UFS filesystems and ccd partitions, use type
+For UFS file systems and ccd partitions, use type
 .Cm 4.2BSD .
 For Vinum drives, use type
 .Cm vinum .
@@ -661,17 +661,17 @@ for more details.
 .It fsize
 For
 .Cm 4.2BSD
-and LFS filesystems only, the fragment size.  Defaults to 1024 for
+and LFS file systems only, the fragment size.  Defaults to 1024 for
 partitions smaller than 1 GB, 4096 for partitions 1GB or larger.
 .It bsize
 For
 .Cm 4.2BSD
-and LFS filesystems only, the block size.  Defaults to 8192 for
+and LFS file systems only, the block size.  Defaults to 8192 for
 partitions smaller than 1 GB, 16384 for partitions 1GB or larger.
 .It bps/cpg
 For
 .Cm 4.2BSD
-filesystems, the number of cylinders in a cylinder group.  For LFS file
+file systems, the number of cylinders in a cylinder group.  For LFS file
 systems, the segment shift value.  Defaults to 16 for
 partitions smaller than 1 GB, 64 for partitions 1GB or larger.
 .El
@@ -734,7 +734,7 @@ NOT install the new label either in-core or on-disk.
 Try to auto-detect the required information from
 .Pa da0s1 ,
 and write a new label to the disk.  Use another disklabel -e command to edit the
-partitioning and filesystem information.
+partitioning and file system information.
 .Pp
 .Dl disklabel -R da0s1 savedlabel
 .Pp
@@ -851,8 +851,8 @@ the
 partition.
 .Pp
 On some machines the bootstrap code may not fit entirely in the area
-allocated for it by some filesystems.
-As a result, it may not be possible to have filesystems on some partitions
+allocated for it by some file systems.
+As a result, it may not be possible to have file systems on some partitions
 of a
 .Dq bootable
 disk.
@@ -863,7 +863,7 @@ If the installed boot code would overlap a partition of type FS_UNUSED
 it is marked as type FS_BOOT.
 The
 .Xr newfs 8
-utility will disallow creation of filesystems on FS_BOOT partitions.
+utility will disallow creation of file systems on FS_BOOT partitions.
 Conversely, if a partition has a type other than FS_UNUSED or FS_BOOT,
 .Nm
 will not install bootstrap code that overlaps it.
diff --git a/sbin/disklabel/disklabel.c b/sbin/disklabel/disklabel.c
index f5c35d2..4a364ac 100644
--- a/sbin/disklabel/disklabel.c
+++ b/sbin/disklabel/disklabel.c
@@ -1240,7 +1240,7 @@ getasciipartspec(char *tp, struct disklabel *lp, int part, int lineno)
 			v = FSMAXTYPES;
 		if ((unsigned)v >= FSMAXTYPES) {
 			fprintf(stderr,
-			    "line %d: Warning, unknown filesystem type %s\n",
+			    "line %d: Warning, unknown file system type %s\n",
 			    lineno, cp);
 			v = FS_UNUSED;
 		}
@@ -1614,7 +1614,7 @@ getvirginlabel(void)
 /*
  * If we are installing a boot program that doesn't fit in d_bbsize
  * we need to mark those partitions that the boot overflows into.
- * This allows newfs to prevent creation of a filesystem where it might
+ * This allows newfs to prevent creation of a file system where it might
  * clobber bootstrap code.
  */
 void