diff options
author | charnier <charnier@FreeBSD.org> | 2002-07-06 19:34:18 +0000 |
---|---|---|
committer | charnier <charnier@FreeBSD.org> | 2002-07-06 19:34:18 +0000 |
commit | a2accd01f0ac2f25d72443923819abceaf128119 (patch) | |
tree | 219860332a065e5cb6defc25dab58e4a8c7997cd /sbin/camcontrol/camcontrol.8 | |
parent | 9639b20db64d084fa58b75058a2bd896b1f743e1 (diff) | |
download | FreeBSD-src-a2accd01f0ac2f25d72443923819abceaf128119.zip FreeBSD-src-a2accd01f0ac2f25d72443923819abceaf128119.tar.gz |
The .Nm utility
Diffstat (limited to 'sbin/camcontrol/camcontrol.8')
-rw-r--r-- | sbin/camcontrol/camcontrol.8 | 23 |
1 files changed, 17 insertions, 6 deletions
diff --git a/sbin/camcontrol/camcontrol.8 b/sbin/camcontrol/camcontrol.8 index 060c1b7..5d1c9b1 100644 --- a/sbin/camcontrol/camcontrol.8 +++ b/sbin/camcontrol/camcontrol.8 @@ -137,18 +137,22 @@ .Nm .Ic help .Sh DESCRIPTION +The .Nm -is a utility designed to provide a way for users to access and control the +utility is designed to provide a way for users to access and control the .Fx CAM subsystem. .Pp +The .Nm +utility can cause a loss of data and/or system crashes if used improperly. Even expert users are encouraged to exercise caution when using this command. Novice users should stay away from this utility. .Pp +The .Nm -has a number of primary functions, many of which support an optional +utility has a number of primary functions, many of which support an optional device identifier. A device identifier can take one of three forms: .Bl -tag -width 14n .It deviceUNIT @@ -222,8 +226,9 @@ List all peripheral drivers attached to a given physical device (logical unit). .It Ic tur Send the SCSI test unit ready (0x00) command to the given device. +The .Nm -will report whether the device is ready or not. +utility will report whether the device is ready or not. .It Ic inquiry Send a SCSI inquiry command (0x12) to a device. By default, .Nm @@ -283,7 +288,9 @@ required. Most drives support the physical sector format. Some drives support the logical block format. Many drives, if they don't support the requested format, return the data in an alternate format, along with sense information indicating that the requested data format isn't supported. +The .Nm +utility attempts to detect this, and print out whatever format the drive returns. If the drive uses a non-standard sense code to report that it doesn't support the requested format, @@ -480,7 +487,9 @@ Show or negotiate various communication parameters. Some controllers may not support setting or changing some of these values. For instance, the Adaptec 174x controllers do not support changing a device's sync rate or offset. +The .Nm +utility will not attempt to set the parameter if the controller indicates that it does not support setting the parameter. To find out what the controller supports, use the @@ -632,8 +641,9 @@ fails. .Dl camcontrol tur da0 .Pp Send the SCSI test unit ready command to da0. +The .Nm -will report whether the disk is ready, but will not display sense +utility will report whether the disk is ready, but will not display sense information if the command fails since the .Fl v switch was not specified. @@ -648,8 +658,9 @@ printing (with the .Fl v flag) if the command fails. Since error recovery is turned on, the disk will be spun up if it is not currently spinning. +The .Nm -will report whether the disk is ready. +utility will report whether the disk is ready. .Bd -literal -offset indent camcontrol cmd -n cd -u 1 -v -c "3C 00 00 00 00 00 00 00 0e 00" \e -i 0xe "s1 i3 i1 i1 i1 i1 i1 i1 i1 i1 i1 i1" @@ -716,7 +727,7 @@ Test Unit Ready command to make the settings take effect. .Sh HISTORY The .Nm -command first appeared in +utility first appeared in .Fx 3.0 . .Pp The mode page editing code and arbitrary SCSI command code are based upon |