Migrate these files down to their ${ARCH} subdir. I should have done

this awhile back (next commit will kludge up something reasonable
for the Alpha).

4 files changed, 119 insertions, 1393 deletions

diff --git a/release/texts/HARDWARE.TXT b/release/texts/HARDWARE.TXT
deleted file mode 100644
index ab863be..0000000
--- a/release/texts/HARDWARE.TXT
+++ /dev/null
@@ -1,745 +0,0 @@
-Table of Contents
------------------
-0.  Document Conventions
-1.  Default Configuration (GENERIC kernel)
-2.  Using UserConfig to change FreeBSD kernel settings
-3.  LINT - other possible configurations
-4.  Supported Hardware
-
-See TROUBLE.TXT for Q&A on known hardware problems.
-
-=========================================================================
-
-0.      Document Conventions
---      --------------------
-
-We have `underlined' text which represents user input with `-' symbols
-throughout this document to differentiate it from the machine output.
-
-1.      Default (GENERIC) Configuration
---      -------------------------------
-
-The following table contains a list of all of the devices that are
-present in the GENERIC kernel.  This is the essential part of the 
-operating system that is placed in your root partition during the 
-installation process.  A compressed version of the GENERIC kernel is
-also used on the installation floppy diskette and DOS boot image.
-
-The table describes the various parameters used by the driver to
-communicate with the hardware in your system.  There are four
-parameters in the table, though not all are used by each and every
-device:
-
-   Port   The starting I/O port used by the device, shown in hexadecimal.
-
-   IOMem  The lowest (or starting) memory address used by the device,
-          also shown in hexadecimal.
-
-   IRQ    The interrupt the device uses to alert the driver to an event,
-          given in decimal.
-
-   DRQ    The DMA (direct memory access) channel the device uses to move
-          data to and from main memory, also given in decimal.
-
-If an entry in the table has `n/a' for a value then it means that the
-parameter in question does not apply to that device.  A value of `dyn'
-means that the correct value should be determined automatically by the
-kernel when the system boots and that you don't need to worry about
-it.
-
-If an entry is marked with an *, it means that support is currently
-not available for it but should be back as soon as someone converts
-the driver to work within the new 3.0 framework.
-
-FreeBSD GENERIC kernel:
-
-        Port    IRQ     DRQ     IOMem   Description
-        ----    ---     ---     -----   ---------------------------------
-fdc0    3f0     6       2       n/a     Floppy disk controller
-wdc0    1f0     14      n/a     n/a     IDE/MFM/RLL disk controller
-wdc1    170     15      n/a     n/a     IDE/MFM/RLL disk controller
-
-adv0    n/a     n/a     n/a     n/a     AdvanSys Narrow SCSI controllers
-adw0    n/a     n/a     n/a     n/a     AdvanSys Wide SCSI controllers
-ncr0    n/a     n/a     n/a     n/a     NCR PCI SCSI controller
-bt0     330     dyn     dyn     dyn     Buslogic SCSI controller
-uha0*   330     dyn     6       dyn     Ultrastore 14f
-aha0    330     dyn     5       dyn     Adaptec 154x/1535 SCSI controller
-ahb0    dyn     dyn     dyn     dyn     Adaptec 174x SCSI controller
-ahc0    dyn     dyn     dyn     dyn     Adaptec 274x/284x/294x SCSI controller
-aic0*   340     11      dyn     dyn     Adaptec 152x/AIC-6360 SCSI
-                                        controller
-isp0    dyn     dyn     dyn     dyn     QLogic 10X0, 2100 SCSI/FC controllers
-dpt     n/a     n/a     n/a     n/a     DPT RAID SCSI controllers.
-
-wt0     300     5       1       dyn     Wangtek and Archive QIC-02/QIC-36
-
-psm0    60      12      n/a     n/a     PS/2 Mouse
-
-mcd0    300     10      n/a     n/a     Mitsumi CD-ROM
-matcd0  230     n/a     n/a     n/a     Matsushita/Panasonic CD-ROM
-scd0    230     n/a     n/a     n/a     Sony CD-ROM
-
-sio0    3f8     4       n/a     n/a     Serial Port 0 (COM1)
-sio1    2f8     3       n/a     n/a     Serial Port 1 (COM2)
-
-lpt0    dyn     7       n/a     n/a     Printer Port 0
-lpt1    dyn     dyn     n/a     n/a     Printer Port 1
-
-al0     dyn     dyn     n/a     dyn     ADMtek AL981 PCI based cards
-ax0     dyn     dyn     n/a     dyn     ASIX AX88140A PCI based cards
-de0     n/a     n/a     n/a     n/a     DEC DC21x40 PCI based cards
-                                        (including 21140 100bT cards)
-ed0     280     10      dyn     d8000   WD & SMC 80xx; Novell NE1000 &
-                                        NE2000; 3Com 3C503; HP PC Lan+
-eg0     310     5       dyn     dyn     3Com 3C505
-ep0     300     10      dyn     dyn     3Com 3C509
-ex0     dyn     dyn     dyn     n/a     Intel EtherExpress Pro/10 cards
-fe0     300     dyn     n/a     n/a     Allied-Telesyn AT1700, RE2000 and
-                                        Fujitsu FMV-180 series cards.
-fxp0    dyn     dyn     n/a     dyn     Intel EtherExpress Pro/100B
-ie0     300     10      dyn     d0000   AT&T StarLAN 10 and EN100;
-                                        3Com 3C507; NI5210; 
-                                        Intel EtherExpress (8/16,16[TP]) cards
-le0     300     5       dyn     d0000   Digital Equipment EtherWorks
-                                        2 and EtherWorks 3
-lnc0    280     10      n/a     dyn     Lance/PCnet cards
-                                        (Isolan, Novell NE2100, NE32-VL,
-					 some PCnet-PCI cards)
-mx0     dyn     dyn     n/a     dyn     Macronix 98713/15/25 PCI based cards
-pn0     dyn     dyn     n/a     dyn     Lite-On PNIC PCI based cards
-rl0     dyn     dyn     n/a     dyn     RealTek 8129/8139 fast ethernet
-sf0     dyn     dyn     n/a     dyn     Adaptec AIC-6915 fast ethernet
-ste0    dyn     dyn     n/a     dyn     Sundance ST201 fast ethernet
-tl0     dyn     dyn     n/a     dyn     TI TNET100 'ThunderLAN' cards.
-wb0     dyn     dyn     n/a     dyn     Winbond W89C840F PCI based cards.
-vr0     dyn     dyn     n/a     dyn     VIA VT3043/VT86C100A PCI based cards.
-vx0     dyn     dyn     n/a     dyn     3Com 3c59x ((Fast) Etherlink III)
-xl0     dyn     dyn     n/a     dyn     3Com 3c900, 3c905, 3c905B, 3c905C,
-                                        3c980, 3cSOHO100 ((Fast) Etherlink XL)
-cs0     0x300   dyn     n/a     n/a     Crystal Semiconductor CS89x0-based
-                                        cards.
-ze0     300     5       n/a     d8000   IBM/National Semiconductor
-                                        PCMCIA Ethernet Controller
-zp0     300     10      n/a     d8000   3Com 3c589 Etherlink III
-                                        PCMCIA Ethernet Controller
---- End of table ---
-
-
-If the hardware in your computer is not set to the same settings as
-those shown in the table and the item in conflict is not marked 'dyn',
-you will have to either reconfigure your hardware or use UserConfig
-to reconfigure the kernel to match the way your hardware is currently set
-(see the next section).
-
-If the settings do not match, the kernel may be unable to locate
-or reliably access the devices in your system.
-
-
-2.      Using UserConfig to change FreeBSD kernel settings
---      --------------------------------------------------
-
-The FreeBSD kernel on the install floppy contains drivers for every
-piece of hardware that could conceivably be used to install the rest
-of the system with.  Unfortunately, PC hardware being what it is, some
-of these devices can be difficult to detect accurately, and for some,
-the process of detecting another can cause irreversible confusion.
-
-To make this process easier, FreeBSD provides UserConfig.  With this
-UserConfig, the user can configure and disable device drivers before
-the kernel is loaded, avoiding potential conflicts, and eliminating
-the need to reconfigure hardware to suit the default driver settings.
-
-Once FreeBSD is installed, it will remember the changes made using
-UserConfig, so that they only need be made once.
-
-It is important to disable drivers that are not relevant to a system
-in order to minimize the possibility of interference, which can cause
-problems that are difficult to track down.
-
-UserConfig features a command line interface for users with serial
-consoles or a need to type commands, and a full screen 'visual'
-interface, which provides point-and-shoot configuration functionality.
-
-Here is a sample UserConfig screen shot in 'visual' mode:
-
----Active Drivers---------------------------10 Conflicts------Dev---IRQ--Port--
- Storage :  (Collapsed)
- Network :
-  NE1000,NE2000,3C503,WD/SMC80xx Ethernet adapters    CONF  ed0       5  0x280
-  NE1000,NE2000,3C503,WD/SMC80xx Ethernet adapters    CONF  ed1       5  0x300 
- Communications : (Collapsed)
- Input : (Collapsed)
- Multimedia :
----Inactive Drivers-------------------------------------------Dev--------------
- Storage :
- Network : (Collapsed)
- Communications :
- Input :
- Multimedia :
- PCI :
-
----Parameters-for-device-ed0---------------------------------------------------
- Port address : 0x280      Memory address : 0xd8000
- IRQ number   : 5          Memory size    : 0x2000
- Flags        : 0x0000
--------------------------------------------------------------------------------
-  IO Port address (Hexadecimal, 0x1-0x2000)
-  [TAB]   Change fields           [Q]   Save device parameters
-
-
-  The screen is divided into four sections :
-
- - Active Drivers.  Listed here are the device drivers that are currently
-   enabled, and their basic parameters.
- - Inactive Drivers.  These drivers are present, but are disabled.
- - Parameter edit field.  This area is used for editing driver parameters.
- - Help area.  Keystroke help is displayed here.
-
-One of the Active and Inactive lists is always in use, and the current
-entry in the list will be shown with a highlight bar.  If there are
-more entries in a list than can be shown, it will scroll.  The bar can
-be moved up and down using the cursor keys, and moved between lists
-with the TAB key.
-
-Drivers in the Active list may be marked "CONF".  This indicates that
-one or more of their parameters conflicts with another device, and
-indicates a potential for problems.  The total number of conflicts is
-displayed at the top of the screen.
-
-As a general rule, conflicts should be avoided, either by disabling
-conflicting devices that are not present in the system, or by altering
-their configuration so that they match the installed hardware.
-
-In the list areas, drivers are grouped by their basic function.
-Groups can be 'Collapsed' to simplify the display (this is the default
-state for all groups).  If a group is collapsed, it will be shown with
-'(Collapsed)' in the list, as above.  To Expand a Collapsed group,
-position the highlight bar over the group heading and press Enter.  To
-Collapse it again, repeat the process.
-
-When a device driver in the Active list is highlighted, its full
-parameters are displayed in the Parameter edit area.  Note that not
-all drivers use all possible parameters, and some hardware supported
-by drivers may not use all the parameters the driver supports.
-
-To disable a driver, go to the Active list, Expand the group it is in,
-highlight the driver and press Del.  The driver will move to its group
-in the Inactive list.  (If the group is collapsed or off the screen,
-you may not see the driver in its new location.)
-
-To enable a driver, go to the Inactive list, Expand the group it is
-in, highlight the driver and press Enter.  The highlight will move to
-the Active list, and the driver you have just enabled will be
-highlighted, ready to be configured.
-
-To configure a driver, go to the Active list, Expand the group it is
-in, highlight the driver and press Enter.  The cursor will move to the
-Parameter edit area, and the device's parameters may be edited.
-
-While editing parameters, the TAB and cursor keys can be used to move
-between fields.  Most numeric values (except IRQ) are entered in
-hexadecimal, as indicated by the '0x' at the beginning of the field.
-The allowable values for a given field are show in the Key Help area
-when the field is active.
-
-To finish configuring a driver, press 'Q'.
-
-Note that PCI and EISA devices can be probed reliably, therefore they
-are not shown in the table above nor can their settings be changed
-using UserConfig.  PCI drivers may be seen in the "PCI Devices" section
-in the Active Devices list, if you wish to check for their presence.
-
-
-3.      LINT - other possible configurations
---      ------------------------------------
-
-The following drivers are not in the GENERIC kernel but remain
-available to those who do not mind compiling a custom kernel (see
-section 6 of FreeBSD.FAQ).  The LINT configuration file
-(/sys/i386/conf/LINT) also contains prototype entries for just about
-every device supported by FreeBSD and is a good general reference.
-
-The device names and a short description of each are listed below.  The port
-numbers, etc, are not meaningful here since you will need to compile a
-custom kernel to gain access to these devices anyway and can thus
-adjust the addresses to match the hardware in your computer in the process.
-The LINT file contains prototype entries for all of the below which you
-can easily cut-and-paste into your own file (or simply copy LINT and edit
-it to taste):
-
-ctx:    Cortex-I frame grabber
-cx:     Cronyx/Sigma multiport sync/async
-cy:     Cyclades high-speed serial driver
-el:     3Com 3C501
-fea:    DEC DEFEA EISA FDDI adapter
-fpa:    DEC DEFPA PCI FDDI adapter
-gp:     National Instruments AT-GPIB and AT-GPIB/TNT board
-gsc:    Genius GS-4500 hand scanner
-gus:    Gravis Ultrasound - Ultrasound, Ultrasound 16, Ultrasound MAX
-gusxvi: Gravis Ultrasound 16-bit PCM
-hea:    Efficient ENI-155p ATM PCI adapter
-hfa:    FORE PCA-200E ATM PCI adapter
-isic:	isdn4bsd Siemens ISDN Chipset driver
-joy:    Joystick
-labpc:  National Instrument's Lab-PC and Lab-PC+
-meteor: Matrox Meteor frame-grabber card
-bktr:   Brooktree Bt848 / Bt 878 based frame-grabber cards.
-mpu:    Roland MPU-401 stand-alone card
-mse:    Microsoft, Logitech, ATI bus mouse ports
-mss:    Microsoft Sound System
-opl:    Yamaha OPL-2 and OPL-3 FM - SB, SB Pro, SB 16, ProAudioSpectrum
-pas:    ProAudioSpectrum PCM and MIDI
-pca:    PCM audio ("/dev/audio") through your PC speaker
-pcm:    PCM audio on most modern ISA audio codecs
-psm:    PS/2 mouse port
-rc:     RISCom/8 multiport card
-sb:     SoundBlaster PCM - SoundBlaster, SB Pro, SB16, ProAudioSpectrum
-sbmidi: SoundBlaster 16 MIDI interface
-sbxvi:  SoundBlaster 16
-si:     Specialix SI/XIO/SX (old and enhanced ISA, PCI, EISA) serial
-spigot: Creative Labs Video Spigot video-acquisition board
-uart:   Stand-alone 6850 UART for MIDI
-wds:    Western Digital WD7000 IDE
-
---- end of list ---
-
-
-4.      Supported Hardware
---      ------------------
-
-FreeBSD currently runs on a wide variety of ISA, VLB, EISA and PCI bus
-based PC's, ranging from 386sx to Pentium class machines (though the
-386sx is not recommended).  Support for generic IDE or ESDI drive
-configurations, various SCSI controller, network and serial cards is
-also provided.
-
-What follows is a list of all peripherals currently known to work with
-FreeBSD.  Other configurations may also work, we have simply not as yet
-received confirmation of this.
-
-
-4.1.    Disk Controllers
-----    ----------------
-
-WD1003 (any generic MFM/RLL)
-WD1007 (any generic IDE/ESDI)
-IDE
-ATA
-
-Adaptec 1535 ISA SCSI controllers
-Adaptec 154x series ISA SCSI controllers
-Adaptec 174x series EISA SCSI controller in standard and enhanced mode.
-Adaptec 274X/284X/2920C/294x/2950/3940/3950 (Narrow/Wide/Twin) series
-EISA/VLB/PCI SCSI controllers.
-Adaptec AIC7850, AIC7860, AIC7880, AIC789x, on-board SCSI controllers.
-
-AdvanSys SCSI controllers (all models).
-
-BusLogic MultiMaster controllers:
-
-[ Please note that BusLogic/Mylex "Flashpoint" adapters are NOT yet supported ]
-
-BusLogic MultiMaster "W" Series Host Adapters:
-    BT-948, BT-958, BT-958D
-BusLogic MultiMaster "C" Series Host Adapters:
-    BT-946C, BT-956C, BT-956CD, BT-445C, BT-747C, BT-757C, BT-757CD, BT-545C,
-    BT-540CF
-BusLogic MultiMaster "S" Series Host Adapters:
-    BT-445S, BT-747S, BT-747D, BT-757S, BT-757D, BT-545S, BT-542D, BT-742A,
-    BT-542B
-BusLogic MultiMaster "A" Series Host Adapters:
-    BT-742A, BT-542B
-
-AMI FastDisk controllers that are true BusLogic MultiMaster clones are also
-supported.
-
-DPT SmartCACHE Plus, SmartCACHE III, SmartRAID III, SmartCACHE IV and
-SmartRAID IV SCSI/RAID controllers are supported.  The DPT SmartRAID/CACHE V
-is not yet supported.
-
-SymBios (formerly NCR) 53C810, 53C810a, 53C815, 53C820, 53C825a,
-53C860, 53C875, 53C875j, 53C885, 53C895 and 53C896 PCI SCSI controllers:
-        ASUS SC-200
-        Data Technology DTC3130 (all variants)
-	Diamond FirePort (all)
-        NCR cards (all)
-        Symbios cards (all)
-        Tekram DC390W, 390U and 390F
-        Tyan S1365
-
-
-QLogic 1020, 1040, 1040B and 2100 SCSI and Fibre Channel Adapters
-
-DTC 3290 EISA SCSI controller in 1542 emulation mode.
-
-With all supported SCSI controllers, full support is provided for
-SCSI-I & SCSI-II peripherals, including hard disks, optical disks,
-tape drives (including DAT and 8mm Exabyte), medium changers, processor
-target devices and CDROM drives.  WORM devices that support CDROM commands
-are supported for read-only access by the CDROM driver.  WORM/CD-R/CD-RW
-writing support is provided by cdrecord, which is in the ports tree.
-
-The following CD-ROM type systems are supported at this time:
-(cd)    SCSI interface (also includes ProAudio Spectrum and
-        SoundBlaster SCSI)
-(matcd) Matsushita/Panasonic (Creative SoundBlaster) proprietary
-        interface (562/563 models)
-(scd)   Sony proprietary interface (all models)
-(acd)   ATAPI IDE interface
-
-The following drivers were supported under the old SCSI subsystem, but are
-NOT YET supported under the new CAM SCSI subsystem:
-
-  Tekram DC390 and DC390T controllers (maybe other cards based on the
-  AMD 53c974 as well).
-
-  NCR5380/NCR53400 ("ProAudio Spectrum") SCSI controller. 
-
-  UltraStor 14F, 24F and 34F SCSI controllers.
-
-  Seagate ST01/02 SCSI controllers.
-
-  Future Domain 8xx/950 series SCSI controllers.
-
-  WD7000 SCSI controller.
-
-  Adaptec 1510 series ISA SCSI controllers (not for bootable devices)
-  Adaptec 152x series ISA SCSI controllers
-  Adaptec AIC-6260 and AIC-6360 based boards, which includes the AHA-152x
-  and SoundBlaster SCSI cards.
-
-  [ Note:  There is work-in-progress to port the AIC-6260/6360 and
-    UltraStor drivers to the new CAM SCSI framework, but no estimates on
-    when or if they will be completed. ]
-
-Unmaintained drivers, they might or might not work for your hardware:
-
-  Floppy tape interface (Colorado/Mountain/Insight)
-
-  (mcd)   Mitsumi proprietary CD-ROM interface (all models)
-
-4.2.    Network cards
-----    -------------
-
-Adaptec Duralink PCI fast ethernet adapters based on the Adaptec
-AIC-6915 fast ethernet controller chip, including the following:
-  ANA-62011 64-bit single port 10/100baseTX adapter
-  ANA-62022 64-bit dual port 10/100baseTX adapter
-  ANA-62044 64-bit quad port 10/100baseTX adapter
-  ANA-69011 32-bit single port 10/100baseTX adapter
-  ANA-62020 64-bit single port 100baseFX adapter
-
-Allied-Telesyn AT1700 and RE2000 cards
-
-Alteon Networks PCI gigabit ethernet NICs based on the Tigon 1 and Tigon 2
-chipsets, including the following:
-  Alteon AceNIC (Tigon 1 and 2)
-  3Com 3c985-SX (Tigon 1 and 2)
-  Netgear GA620 (Tigon 2)
-  Silicon Graphics Gigabit Ethernet
-  DEC/Compaq EtherWORKS 1000
-  NEC Gigabit Ethernet
-
-AMD PCnet/PCI (79c970 & 53c974 or 79c974)
-
-SMC Elite 16 WD8013 ethernet interface, and most other WD8003E,
-WD8003EBT, WD8003W, WD8013W, WD8003S, WD8003SBT and WD8013EBT
-based clones.  SMC Elite Ultra is also supported.
-
-RealTek 8129/8139 fast ethernet NICs including the following:
-  Allied Telesyn AT2550
-  Allied Telesyn AT2500TX
-  Genius GF100TXR (RTL8139)
-  NDC Communications NE100TX-E
-  OvisLink LEF-8129TX
-  OvisLink LEF-8139TX
-  Netronix Inc. EA-1210 NetEther 10/100
-  KTX-9130TX 10/100 Fast Ethernet
-  Accton "Cheetah" EN1027D (MPX 5030/5038; RealTek 8139 clone?)
-  SMC EZ Card 10/100 PCI 1211-TX
-
-Lite-On 82c168/82c169 PNIC fast ethernet NICs including the following:
-  LinkSys EtherFast LNE100TX
-  NetGear FA310-TX Rev. D1
-  Matrox FastNIC 10/100
-  Kingston KNE110TX
-
-Macronix 98713, 98713A, 98715, 98715A and 98725 fast ethernet NICs
-  NDC Communications SFA100A (98713A)
-  CNet Pro120A (98713 or 98713A)
-  CNet Pro120B (98715)
-  SVEC PN102TX (98713)
-
-Macronix/Lite-On PNIC II LC82C115 fast ethernet NICs including the following:
-  LinkSys EtherFast LNE100TX Version 2
-
-Winbond W89C840F fast ethernet NICs including the following:
-  Trendware TE100-PCIE
-
-VIA Technologies VT3043 "Rhine I" and VT86C100A "Rhine II" fast ethernet
-NICs including the following:
-  Hawking Technologies PN102TX
-  D-Link DFE-530TX
-
-Sundance Technologies ST201 PCI fast ethernet NICs including
-the following:
-  D-Link DFE-550TX
-
-SysKonnect SK-984x PCI gigabit ethernet cards including the following:
-  SK-9841 1000baseLX single mode fiber, single port
-  SK-9842 1000baseSX multimode fiber, single port
-  SK-9843 1000baseLX single mode fiber, dual port
-  SK-9844 1000baseSX multimode fiber, dual port
-
-Texas Instruments ThunderLAN PCI NICs, including the following:
-  Compaq Netelligent 10, 10/100, 10/100 Proliant, 10/100 Dual-Port
-  Compaq Netelligent 10/100 TX Embedded UTP, 10 T PCI UTP/Coax, 10/100 TX UTP
-  Compaq NetFlex 3P, 3P Integrated, 3P w/ BNC
-  Olicom OC-2135/2138, OC-2325, OC-2326 10/100 TX UTP
-  Racore 8165 10/100baseTX
-  Racore 8148 10baseT/100baseTX/100baseFX multi-personality
-
-ADMtek AL981-based PCI fast ethernet NICs
-
-ASIX Electronics AX88140A PCI NICs, including the following:
-  Alfa Inc. GFC2204
-  CNet Pro110B
-
-DEC EtherWORKS III NICs (DE203, DE204, and DE205)
-DEC EtherWORKS II NICs (DE200, DE201, DE202, and DE422)
-DEC DC21040, DC21041, or DC21140 based NICs (SMC Etherpower 8432T, DE245, etc)
-DEC FDDI (DEFPA/DEFEA) NICs
-
-Efficient ENI-155p ATM PCI
-
-FORE PCA-200E ATM PCI
-
-Fujitsu MB86960A/MB86965A
-
-HP PC Lan+ cards (model numbers: 27247B and 27252A).
-
-Intel EtherExpress (not recommended due to driver instability)
-Intel EtherExpress Pro/10
-Intel EtherExpress Pro/100B PCI Fast Ethernet
-
-Isolan AT 4141-0 (16 bit)
-Isolink 4110     (8 bit)
-
-Novell NE1000, NE2000, and NE2100 ethernet interface.
-PCI network cards emulating the NE2000: RealTek 8029, NetVin 5000,
-Winbond W89C940, Surecom NE-34, VIA VT86C926.
-
-3Com 3C501 cards
-
-3Com 3C503 Etherlink II
-
-3Com 3c505 Etherlink/+
-
-3Com 3C507 Etherlink 16/TP
-
-3Com 3C509, 3C579, 3C589 (PCMCIA), 3C590/592/595/900/905/905B/905C PCI
-and EISA (Fast) Etherlink III / (Fast) Etherlink XL
-
-3Com 3c980/3c980B Fast Etherlink XL server adapter
-
-3Com 3cSOHO100-TX OfficeConnect adapter
-
-Toshiba ethernet cards
-
-PCMCIA ethernet cards from IBM and National Semiconductor are also
-supported.
-
-Note that NO token ring cards are supported at this time as we're
-still waiting for someone to donate a driver for one of them.  Any
-takers?
-
-
-4.3.    USB
-----    ---
-
-A range of USB peripherals are supported.  Owing to the generic nature
-of most USB devices, with some exceptions any device of a given class
-will be supported even if not explicitly listed here.
-
-USB keyboards.
-
-USB mice.
-
-USB printers and USB to parallel printer conversion cables.
-
-USB hubs.
-
-
-Motherboards chipsets:
-
-ALi Aladdin-V.
-
-Intel 82371SB (PIIX3).
-Intel 82371AB and EB chipsets (PIIX4).
-
-NEC uPD 9210 Host Controller.
-
-VIA 83C572 USB Host Controller
-
-and any other UHCI or OHCI compliant motherboard chipset (no exceptions
-known).
-
-
-PCI plug-in USB host controllers:
-
-ADS Electronics PCI plug-in card (2 ports).
-
-Entrega PCI plug-in card (4 ports).
-
-
-Specific devices reported to be working:
-
-Agiler Mouse 29UO.
-
-Andromeda hub.
-
-Apple iMac mouse.
-Apple iMac keyboard.
-
-ATen parallel printer adapter.
-
-Belkin F5U002 parallel printer adapter.
-Belkin Mouse.
-
-BTC BTC7935 keyboard with mouse port.
-
-Cherry G81-3504 keyboard.
-
-Chic mouse.
-
-Cypress mouse.
-
-Entrega USB-to-parallel printer adapter.
-
-Genius Niche mouse.
-
-Iomega USB Zip 100Mb.
-
-Kensington Mouse-in-a-Box.
-
-Logitech M2452 keyboard.
-Logitech wheel mouse (3 buttons).
-Logitech PS/2 / USB mouse (3 buttons).
-
-MacAlly mouse (3 buttons).
-MacAlly self powered hub (4 ports).
-
-Microsoft IntelliMouse (3 buttons).
-Microsoft keyboard.
-
-NEC hub.
-
-Trust Ami Mouse (3 buttons).
-
-
-4.4.    ISDN (European DSS1 [Q.921/Q.931] protocol)
-----    -------------------------------------------
-
-Asuscom I-IN100-ST-DV (experimental, may work)
-Asuscom ISDNlink 128K PnP
-
-AVM A1
-AVM Fritz!Card classic
-AVM Fritz!Card PnP
-AVM Fritz!Card PCI
-AVM Fritz!Card PCMCIA
-
-Creatix ISDN-S0/8
-Creatix ISDN-S0/16
-Creatix ISDN-S0 PnP
-
-Dr.Neuhaus Niccy 1008
-Dr.Neuhaus Niccy 1016
-Dr.Neuhaus Niccy GO@ (ISA PnP)
-
-Dynalink IS64PH (no longer maintained)
-
-ELSA 1000pro ISA
-ELSA 1000pro PCI
-ELSA PCC-16
-
-ITK ix1 micro
-ITK ix1 micro PnP
-
-Sagem Cybermod (ISA PnP, may work)
-
-Sedlbauer Win Speed
-
-Siemens I-Surf 2.0
-
-Stollmann Tina-pp (under development)
-
-Teles S0/8
-Teles S0/16
-Teles S0/16.3 (the "c" Versions - like 16.3c - are unsupported !)
-Teles S0 PnP (experimental, may work)
-
-3Com/USRobotics Sportster ISDN TA intern (non-PnP version)
-
-
-4.5.    Misc
-----    ----
-
-AST 4 port serial card using shared IRQ.
-
-ARNET 8 port serial card using shared IRQ.
-ARNET (now Digiboard) Sync 570/i high-speed serial.
-
-Boca BB1004 4-Port serial card (Modems NOT supported)
-Boca IOAT66 6-Port serial card (Modems supported)
-Boca BB1008 8-Port serial card (Modems NOT supported)
-Boca BB2016 16-Port serial card (Modems supported)
-
-Cyclades Cyclom-y Serial Board.
-
-STB 4 port card using shared IRQ.
-
-SDL Communications Riscom/8 Serial Board.
-SDL Communications RISCom/N2 and N2pci high-speed sync serial boards.
-
-Specialix SI/XIO/SX multiport serial cards, with both the older
-SIHOST2.x and the new "enhanced" (transputer based, aka JET) host cards.
-ISA, EISA and PCI are supported.
-
-Stallion multiport serial boards: EasyIO, EasyConnection 8/32 & 8/64,
-ONboard 4/16 and Brumby.
-
-Adlib, SoundBlaster, SoundBlaster Pro, ProAudioSpectrum, Gravis UltraSound
-and Roland MPU-401 sound cards.
-
-Connectix QuickCam
-Matrox Meteor Video frame grabber
-Creative Labs Video Spigot frame grabber
-Cortex1 frame grabber
-Various Frame grabbers based on Brooktree Bt848 and Bt878 chip.
-
-HP4020, HP6020, Philips CDD2000/CDD2660 and Plasmon CD-R drives.
-
-Bus mice
-
-PS/2 mice
-
-Standard PC Joystick
-
-X-10 power controllers
-
-GPIB and Transputer drivers.
-
-Genius and Mustek hand scanners.
-
-Floppy tape drives (some rather old models only, driver rather stale)
-
-Lucent Technologies WaveLAN/IEEE 802.11 PCMCIA and ISA standard speed
-(2Mbps) and turbo speed (6Mbps) wireless network adapters and workalikes
-(NCR WaveLAN/IEEE 802.11, Cabletron RoamAbout 802.11 DS).  Note: the
-ISA versions of these adapters are actually PCMCIA cards combined with
-an ISA to PCMCIA bridge card, so both kinds of devices work with
-the same driver.
-
-FreeBSD currently does NOT support IBM's microchannel (MCA) bus.
diff --git a/release/texts/RELNOTES.TXT b/release/texts/RELNOTES.TXT
deleted file mode 100644
index 1442291..0000000
--- a/release/texts/RELNOTES.TXT
+++ /dev/null
@@ -1,623 +0,0 @@
-                                 RELEASE NOTES
-                            FreeBSD Release 4.0-SNAP
-
-This is a 4.0-CURRENT release SNAPshot of FreeBSD, an active
-development branch which is not expected to produce a release for
-some time.  This line of development branched from the 3.x line
-on January 20, 1999; that branch will see continuing releases and
-some features of 4.0 will be back-ported.
-
-Any installation failures or crashes should be reported by using the
-send-pr command (those preferring a Web-based interface can also see
-http://www.freebsd.org/send-pr.html).
-
-For information about FreeBSD and the layout of the 4.0-RELEASE
-directory (especially if you're installing from floppies!), see
-ABOUT.TXT.  For installation instructions, see the INSTALL.TXT and
-HARDWARE.TXT files.
-
-For the latest of these 4.0-current snapshots, you should always see:
-
-        ftp://current.freebsd.org/pub/FreeBSD
-
-If you wish to get the latest post-3.x-RELEASE technology.
-
-Table of contents:
-------------------
-1. What's new since the 3.1/4.0 branch
-   1.1 KERNEL CHANGES
-   1.2 SECURITY FIXES
-   1.3 USERLAND CHANGES
-
-2. Supported Configurations
-   2.1 Disk Controllers
-   2.2 Ethernet cards
-   2.3 ATM
-   2.4 Misc
-
-3. Obtaining FreeBSD
-   3.1 FTP/Mail
-   3.2 CDROM
-
-4. Upgrading from previous releases of FreeBSD
-
-5. Reporting problems, making suggestions, submitting code
-6. Acknowledgements
-
-
-1. What's new since the 3.1/4.0 branch
---------------------------------------
-All changes described here are unique to the 4.0 branch unless
-specifically marked as [MERGED] features.
-
-1.1. KERNEL CHANGES
--------------------
-
-The VM system's anonymous storage subsystem (the ``swap pager'') has
-been completely revamped.
-
-An emulator for SVR4 binaries has been added.
-
-Support has been added for direct access to NTFS filesystems.
-
-Driver support has been added for PCI gigabit ethernet adapters
-based on the Alteon Networks Tigon 1 and Tigon 2 chipsets, including
-the Alteon AceNIC, 3Com 3c985 and Netgear GA620. [MERGED]
-
-Driver support has been added for IEEE 802.11 PCMCIA wireless network
-adapters based on the Lucent Hermes chipset, including the Lucent
-WaveLAN/IEEE 802.11 and the Cabletron RoamAbout.  Both 2Mbps and
-6Mbps Turbo adapters are supported. [MERGED]
-
-Driver support has been added for PCI fast ethernet cards based
-on the ADMtek Inc. AL981 Comet chipset. [MERGED]
-
-Support has been added for the Rise mP6 processor. [MERGED]
-
-Driver support has been added for SysKonnect SK-984x PCI gigabit
-ethernet adapters.
-
-Driver support has been added for Adaptec Duralink PCI ethernet adapters
-based on the Adaptec AIC-6915 fast ethernet controller.
-
-Driver support has been added for PCI fast ethernet adapters based on
-the Sundance Technologies ST201 controller, including the D-Link DFE-550TX.
-
-Driver support has been added for the 3Com 3c905C-TX. [MERGED]
-
-1.2. SECURITY FIXES
--------------------
-A new jail(2) system call and admin command (jail(8)) have been added for
-additional flexibility in creating secure process execution environments.
-
-
-1.3. USERLAND CHANGES
----------------------
-
-The base C/C++ compiler has been upgraded from GCC 2.7.2 to EGCS 1.1.2.
-This gives users full ISO C++ support.
-
-The timezone database has been updated to catch all of the recent changes
-in Europe, the former Soviet Union, and Central and South America.
-The timezone data files now contain a magic number allowing for easy
-identification.
-
-The f77 emulation via f2c has been updated to a current version.
-
-The Internet Software Consortium's DHCP client has been added to the 
-base system.
-
-Groff/troff/eqn has been updated to version 1.11.
-
-Gdb has been updated to version 4.18 and is now part of the standard
-release for FreeBSD/alpha.
-
-
-2. Supported Configurations
----------------------------
-FreeBSD currently runs on a wide variety of ISA, VLB, EISA and PCI bus
-based PC's, ranging from 386sx to Pentium class machines (though the
-386sx is not recommended).  Support for generic IDE or ESDI drive
-configurations, various SCSI controller, network and serial cards is
-also provided.
-
-What follows is a list of all peripherals currently known to work with
-FreeBSD.  Other configurations may also work, we have simply not as yet
-received confirmation of this.
-
-
-2.1. Disk Controllers
----------------------
-WD1003 (any generic MFM/RLL)
-WD1007 (any generic IDE/ESDI)
-IDE
-ATA
-
-Adaptec 1535 ISA SCSI controllers
-Adaptec 154x series ISA SCSI controllers
-Adaptec 174x series EISA SCSI controller in standard and enhanced mode.
-Adaptec 274X/284X/2920C/294x/2950/3940/3950 (Narrow/Wide/Twin) series
-EISA/VLB/PCI SCSI controllers.
-Adaptec AIC7850, AIC7860, AIC7880, AIC789x, on-board SCSI controllers.
-
-AdvanSys SCSI controllers (all models).
-
-BusLogic MultiMaster controllers:
-
-[ Please note that BusLogic/Mylex "Flashpoint" adapters are NOT yet supported ]
-
-BusLogic MultiMaster "W" Series Host Adapters:
-    BT-948, BT-958, BT-958D
-BusLogic MultiMaster "C" Series Host Adapters:
-    BT-946C, BT-956C, BT-956CD, BT-445C, BT-747C, BT-757C, BT-757CD, BT-545C,
-    BT-540CF
-BusLogic MultiMaster "S" Series Host Adapters:
-    BT-445S, BT-747S, BT-747D, BT-757S, BT-757D, BT-545S, BT-542D, BT-742A,
-    BT-542B
-BusLogic MultiMaster "A" Series Host Adapters:
-    BT-742A, BT-542B
-
-AMI FastDisk controllers that are true BusLogic MultiMaster clones are also
-supported.
-
-DPT SmartCACHE Plus, SmartCACHE III, SmartRAID III, SmartCACHE IV and
-SmartRAID IV SCSI/RAID controllers are supported.  The DPT SmartRAID/CACHE V
-is not yet supported.
-
-SymBios (formerly NCR) 53C810, 53C810a, 53C815, 53C820, 53C825a,
-53C860, 53C875, 53C875j, 53C885, 53C895 and 53C896 PCI SCSI controllers:
-        ASUS SC-200
-        Data Technology DTC3130 (all variants)
-	Diamond FirePort (all)
-        NCR cards (all)
-        Symbios cards (all)
-        Tekram DC390W, 390U and 390F
-        Tyan S1365
-
-
-QLogic 1020, 1040, 1040B, 1080 and 1240 SCSI Host Adapters.
-QLogic 2100 Fibre Channel Adapters (private loop only).
-
-DTC 3290 EISA SCSI controller in 1542 emulation mode.
-
-With all supported SCSI controllers, full support is provided for
-SCSI-I & SCSI-II peripherals, including hard disks, optical disks,
-tape drives (including DAT and 8mm Exabyte), medium changers, processor
-target devices and CDROM drives.  WORM devices that support CDROM commands
-are supported for read-only access by the CDROM driver.  WORM/CD-R/CD-RW
-writing support is provided by cdrecord, which is in the ports tree.
-
-The following CD-ROM type systems are supported at this time:
-(cd)    SCSI interface (also includes ProAudio Spectrum and
-        SoundBlaster SCSI)
-(matcd) Matsushita/Panasonic (Creative SoundBlaster) proprietary
-        interface (562/563 models)
-(scd)   Sony proprietary interface (all models)
-(acd)   ATAPI IDE interface
-
-The following drivers were supported under the old SCSI subsystem, but are
-NOT YET supported under the new CAM SCSI subsystem:
-
-  Tekram DC390 and DC390T controllers (maybe other cards based on the
-  AMD 53c974 as well).
-
-  NCR5380/NCR53400 ("ProAudio Spectrum") SCSI controller. 
-
-  UltraStor 14F, 24F and 34F SCSI controllers.
-
-  Seagate ST01/02 SCSI controllers.
-
-  Future Domain 8xx/950 series SCSI controllers.
-
-  WD7000 SCSI controller.
-
-  Adaptec 1510 series ISA SCSI controllers (not for bootable devices)
-  Adaptec 152x series ISA SCSI controllers
-  Adaptec AIC-6260 and AIC-6360 based boards, which includes the AHA-152x
-  and SoundBlaster SCSI cards.
-
-  [ Note:  There is work-in-progress to port the AIC-6260/6360 and
-    UltraStor drivers to the new CAM SCSI framework, but no estimates on
-    when or if they will be completed. ]
-
-Unmaintained drivers, they might or might not work for your hardware:
-
-  Floppy tape interface (Colorado/Mountain/Insight)
-
-  (mcd)   Mitsumi proprietary CD-ROM interface (all models)
-
-2.2. Ethernet cards
--------------------
-
-Adaptec Duralink PCI fast ethernet adapters based on the Adaptec
-AIC-6915 fast ethernet controller chip, including the following:
-  ANA-62011 64-bit single port 10/100baseTX adapter
-  ANA-62022 64-bit dual port 10/100baseTX adapter
-  ANA-62044 64-bit quad port 10/100baseTX adapter
-  ANA-69011 32-bit single port 10/100baseTX adapter
-  ANA-62020 64-bit single port 100baseFX adapter
-
-Allied-Telesis AT1700 and RE2000 cards
-
-Alteon Networks PCI gigabit ethernet NICs based on the Tigon 1 and Tigon 2
-chipsets, including the following:
-  Alteon AceNIC (Tigon 1 and 2)
-  3Com 3c985-SX (Tigon 1 and 2)
-  Netgear GA620 (Tigon 2)
-  Silicon Graphics Gigabit Ethernet
-  DEC/Compaq EtherWORKS 1000
-  NEC Gigabit Ethernet
-
-AMD PCnet/PCI (79c970 & 53c974 or 79c974)
-
-SMC Elite 16 WD8013 ethernet interface, and most other WD8003E,
-WD8003EBT, WD8003W, WD8013W, WD8003S, WD8003SBT and WD8013EBT
-based clones.  SMC Elite Ultra.  SMC Etherpower II.
-
-RealTek 8129/8139 fast ethernet NICs including the following:
-  Allied Telesyn AT2550
-  Allied Telesyn AT2500TX
-  Genius GF100TXR (RTL8139)
-  NDC Communications NE100TX-E
-  OvisLink LEF-8129TX
-  OvisLink LEF-8139TX
-  Netronix Inc. EA-1210 NetEther 10/100
-  KTX-9130TX 10/100 Fast Ethernet
-  Accton "Cheetah" EN1027D (MPX 5030/5038; RealTek 8139 clone?)
-  SMC EZ Card 10/100 PCI 1211-TX
-
-Lite-On 82c168/82c169 PNIC fast ethernet NICs including the following:
-  LinkSys EtherFast LNE100TX
-  NetGear FA310-TX Rev. D1
-  Matrox FastNIC 10/100
-  Kingston KNE110TX
-
-Macronix 98713, 98713A, 98715, 98715A and 98725 fast ethernet NICs
-  NDC Communications SFA100A (98713A)
-  CNet Pro120A (98713 or 98713A)
-  CNet Pro120B (98715)
-  SVEC PN102TX (98713)
-
-Macronix/Lite-On PNIC II LC82C115 fast ethernet NICs including the following:
-  LinkSys EtherFast LNE100TX Version 2
-
-Winbond W89C840F fast ethernet NICs including the following:
-  Trendware TE100-PCIE
-
-VIA Technologies VT3043 "Rhine I" and VT86C100A "Rhine II" fast ethernet
-NICs including the following:
-  Hawking Technologies PN102TX
-  D-Link DFE-530TX
-
-Sundance Technologies ST201 PCI fast ethernet NICs including
-the following:
-  D-Link DFE-550TX
-
-SysKonnect SK-984x PCI gigabit ethernet cards including the following:
-  SK-9841 1000baseLX single mode fiber, single port
-  SK-9842 1000baseSX multimode fiber, single port
-  SK-9843 1000baseLX single mode fiber, dual port
-  SK-9844 1000baseSX multimode fiber, dual port
-
-Texas Instruments ThunderLAN PCI NICs, including the following:
-  Compaq Netelligent 10, 10/100, 10/100 Proliant, 10/100 Dual-Port
-  Compaq Netelligent 10/100 TX Embedded UTP, 10 T PCI UTP/Coax, 10/100 TX UTP
-  Compaq NetFlex 3P, 3P Integrated, 3P w/ BNC
-  Olicom OC-2135/2138, OC-2325, OC-2326 10/100 TX UTP
-  Racore 8165 10/100baseTX
-  Racore 8148 10baseT/100baseTX/100baseFX multi-personality
-
-ADMtek Inc. AL981-based PCI fast ethernet NICs
-
-ASIX Electronics AX88140A PCI NICs, including the following:
-  Alfa Inc. GFC2204
-  CNet Pro110B
-
-DEC EtherWORKS III NICs (DE203, DE204, and DE205)
-DEC EtherWORKS II NICs (DE200, DE201, DE202, and DE422)
-DEC DC21040, DC21041, or DC21140 based NICs (SMC Etherpower 8432T, DE245, etc)
-DEC FDDI (DEFPA/DEFEA) NICs
-
-Fujitsu MB86960A/MB86965A
-
-HP PC Lan+ cards (model numbers: 27247B and 27252A).
-
-Intel EtherExpress 16
-Intel EtherExpress Pro/10
-Intel EtherExpress Pro/100B PCI Fast Ethernet
-
-Isolan AT 4141-0 (16 bit)
-Isolink 4110     (8 bit)
-
-Novell NE1000, NE2000, and NE2100 ethernet interface.
-
-PCI network cards emulating the NE2000: RealTek 8029, NetVin 5000,
-Winbond W89C940, Surecom NE-34, VIA VT86C926.
-
-3Com 3C501 cards
-
-3Com 3C503 Etherlink II
-
-3Com 3c505 Etherlink/+
-
-3Com 3C507 Etherlink 16/TP
-
-3Com 3C509, 3C579, 3C589 (PCMCIA), 3C590/592/595/900/905/905B/905C PCI
-and EISA (Fast) Etherlink III / (Fast) Etherlink XL
-
-3Com 3c980/3c980B Fast Etherlink XL server adapter
-
-3Com 3cSOHO100-TX OfficeConnect adapter
-
-Toshiba ethernet cards
-
-Crystal Semiconductor CS89x0-based NICs, including:
-  IBM Etherjet ISA
-
-PCMCIA ethernet cards from IBM and National Semiconductor are also
-supported.
-
-Note that NO token ring cards are supported at this time as we're
-still waiting for someone to donate a driver for one of them.  Any
-takers?
-
-2.3 ATM
--------
-
-   o ATM Host Interfaces
-        - FORE Systems, Inc. PCA-200E ATM PCI Adapters
-        - Efficient Networks, Inc. ENI-155p ATM PCI Adapters
-
-   o ATM Signalling Protocols
-        - The ATM Forum UNI 3.1 signalling protocol
-        - The ATM Forum UNI 3.0 signalling protocol
-        - The ATM Forum ILMI address registration
-        - FORE Systems's proprietary SPANS signalling protocol
-        - Permanent Virtual Channels (PVCs)
-
-   o IETF "Classical IP and ARP over ATM" model
-        - RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
-        - RFC 1577, "Classical IP and ARP over ATM"
-        - RFC 1626, "Default IP MTU for use over ATM AAL5"
-        - RFC 1755, "ATM Signaling Support for IP over ATM"
-        - RFC 2225, "Classical IP and ARP over ATM"
-        - RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
-        - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
-                "A Distributed ATMARP Service Using SCSP"
-
-   o ATM Sockets interface
-
-2.4. Misc
----------
-
-AST 4 port serial card using shared IRQ.
-
-ARNET 8 port serial card using shared IRQ.
-ARNET (now Digiboard) Sync 570/i high-speed serial.
-
-Boca BB1004 4-Port serial card (Modems NOT supported)
-Boca IOAT66 6-Port serial card (Modems supported)
-Boca BB1008 8-Port serial card (Modems NOT supported)
-Boca BB2016 16-Port serial card (Modems supported)
-
-Comtrol Rocketport card.
-
-Cyclades Cyclom-y Serial Board.
-
-STB 4 port card using shared IRQ.
-
-SDL Communications Riscom/8 Serial Board.
-SDL Communications RISCom/N2 and N2pci high-speed sync serial boards.
-
-Stallion multiport serial boards: EasyIO, EasyConnection 8/32 & 8/64,
-ONboard 4/16 and Brumby.
-
-Specialix SI/XIO/SX ISA, EISA and PCI serial expansion cards/modules.
-
-Adlib, SoundBlaster, SoundBlaster Pro, ProAudioSpectrum, Gravis UltraSound
-and Roland MPU-401 sound cards. (snd driver)
-
-Most ISA audio codecs manufactured by Crystal Semiconductors, OPTi, Creative
-Labs, Avance, Yamaha and ENSONIQ. (pcm driver)
-
-Connectix QuickCam
-Matrox Meteor Video frame grabber
-Creative Labs Video Spigot frame grabber
-Cortex1 frame grabber
-Hauppauge Wincast/TV boards (PCI)
-STB TV PCI
-Intel Smart Video Recorder III
-Various Frame grabbers based on Brooktree Bt848 / Bt878 chip.
-
-HP4020, HP6020, Philips CDD2000/CDD2660 and Plasmon CD-R drives.
-
-PS/2 mice
-
-Standard PC Joystick
-
-X-10 power controllers
-
-GPIB and Transputer drivers.
-
-Genius and Mustek hand scanners.
-
-Xilinx XC6200 based reconfigurable hardware cards compatible with
-the HOT1 from Virtual Computers (www.vcc.com)
-
-Support for Dave Mills experimental Loran-C receiver.
-
-Lucent Technologies WaveLAN/IEEE 802.11 PCMCIA and ISA standard speed
-(2Mbps) and turbo speed (6Mbps) wireless network adapters and workalikes
-(NCR WaveLAN/IEEE 802.11, Cabletron RoamAbout 802.11 DS). Note: the
-ISA versions of these adapters are actually PCMCIA cards combined with
-an ISA to PCMCIA bridge card, so both kinds of devices work with
-the same driver.
-
-FreeBSD currently does NOT support IBM's microchannel (MCA) bus.
-
-3. Obtaining FreeBSD
---------------------
-
-You may obtain FreeBSD in a variety of ways:
-
-3.1. FTP/Mail
--------------
-
-You can ftp FreeBSD and any or all of its optional packages from
-`ftp.freebsd.org' - the official FreeBSD release site.
-
-For other locations that mirror the FreeBSD software see the file
-MIRROR.SITES.  Please ftp the distribution from the site closest (in
-networking terms) to you.  Additional mirror sites are always welcome!
-Contact freebsd-admin@FreeBSD.org for more details if you'd like to 
-become an official mirror site.
-
-If you do not have access to the Internet and electronic mail is your
-only recourse, then you may still fetch the files by sending mail to
-`ftpmail@ftpmail.vix.com' - putting the keyword "help" in your message
-to get more information on how to fetch files using this mechanism.
-Please do note, however, that this will end up sending many *tens of
-megabytes* through the mail and should only be employed as an absolute
-LAST resort!
-
-
-3.2. CDROM
-----------
-
-FreeBSD 3.0-RELEASE and 2.2.x-RELEASE CDs may be ordered on CDROM from:
-
-        Walnut Creek CDROM
-        4041 Pike Lane, Suite D
-        Concord CA  94520
-        1-800-786-9907, +1-925-674-0783, +1-925-674-0821 (FAX)
-
-Or via the Internet from orders@cdrom.com or http://www.cdrom.com.
-Their current catalog can be obtained via ftp from:
-
-        ftp://ftp.cdrom.com/cdrom/catalog
-
-Cost per -RELEASE CD is $39.95 or $24.95 with a FreeBSD subscription.
-FreeBSD SNAPshot CDs, when available, are $39.95 or $14.95 with a
-FreeBSD-SNAP subscription (-RELEASE and -SNAP subscriptions are entirely
-separate).  With a subscription, you will automatically receive updates as
-they are released.  Your credit card will be billed when each disk is
-shipped and you may cancel your subscription at any time without further
-obligation.
-
-Shipping (per order not per disc) is $5 in the US, Canada or Mexico
-and $9.00 overseas.  They accept Visa, Mastercard, Discover, American
-Express or checks in U.S. Dollars and ship COD within the United
-States.  California residents please add 8.25% sales tax.
-
-Should you be dissatisfied for any reason, the CD comes with an
-unconditional return policy.
-
-
-4. Upgrading from previous releases of FreeBSD
-----------------------------------------------
-
-If you're upgrading from a previous release of FreeBSD, most likely
-it's 3.0 and some of the following issues may affect you, depending
-of course on your chosen method of upgrading.  There are two popular
-ways of upgrading FreeBSD distributions:
-
-        o Using sources, via /usr/src
-        o Using sysinstall's (binary) upgrade option.
-
-[insert other notes here]
-
-
-5. Reporting problems, making suggestions, submitting code.
------------------------------------------------------------
-Your suggestions, bug reports and contributions of code are always
-valued - please do not hesitate to report any problems you may find
-(preferably with a fix attached, if you can!).
-
-The preferred method to submit bug reports from a machine with
-Internet mail connectivity is to use the send-pr command or use the CGI
-script at http://www.freebsd.org/send-pr.html.  Bug reports
-will be dutifully filed by our faithful bugfiler program and you can
-be sure that we'll do our best to respond to all reported bugs as soon
-as possible.  Bugs filed in this way are also visible on our WEB site
-in the support section and are therefore valuable both as bug reports
-and as "signposts" for other users concerning potential problems to
-watch out for.
-
-If, for some reason, you are unable to use the send-pr command to
-submit a bug report, you can try to send it to:
-
-                freebsd-bugs@FreeBSD.org
-
-Note that send-pr itself is a shell script that should be easy to move
-even onto a totally different system.  We much prefer if you could use
-this interface, since it make it easier to keep track of the problem
-reports.  However, before submitting, please try to make sure whether
-the problem might have already been fixed since.
-
-
-Otherwise, for any questions or tech support issues, please send mail to:
-
-                freebsd-questions@FreeBSD.org
-
-
-Additionally, being a volunteer effort, we are always happy to have
-extra hands willing to help - there are already far more desired
-enhancements than we'll ever be able to manage by ourselves!  To
-contact us on technical matters, or with offers of help, please send
-mail to:
-
-                freebsd-hackers@FreeBSD.org
-
-
-Please note that these mailing lists can experience *significant*
-amounts of traffic and if you have slow or expensive mail access and
-are only interested in keeping up with significant FreeBSD events, you
-may find it preferable to subscribe instead to:
-
-                freebsd-announce@FreeBSD.org
-
-
-All of the mailing lists can be freely joined by anyone wishing
-to do so.  Send mail to MajorDomo@FreeBSD.org and include the keyword
-`help' on a line by itself somewhere in the body of the message.  This
-will give you more information on joining the various lists, accessing
-archives, etc.  There are a number of mailing lists targeted at
-special interest groups not mentioned here, so send mail to majordomo
-and ask about them!
-
-
-6. Acknowledgements
--------------------
-
-FreeBSD represents the cumulative work of many dozens, if not
-hundreds, of individuals from around the world who have worked very
-hard to bring you this release.  For a complete list of FreeBSD
-project staffers, please see:
-
-        http://www.freebsd.org/handbook/staff.html
-
-or, if you've loaded the doc distribution:
-
-        file:/usr/share/doc/handbook/staff.html
-
-
-Special mention to:
-
-        The donors listed at http://www.freebsd.org/handbook/donors.html
-
-        Justin M. Seger <jseger@freebsd.org> for almost single-handedly
-        converting the ports collection to ELF.
-
-        Doug Rabson <dfr@freebsd.org> and John Birrell <jb@freebsd.org>
-        for making FreeBSD/alpha happen and to the NetBSD project for
-        substantial indirect aid.
-
-        Peter Wemm <peter@freebsd.org> for the new kernel module system
-        (with substantial aid from Doug Rabson).
-
-        And to the many thousands of FreeBSD users and testers all over the
-        world, without whom this release simply would not have been possible.
-
-We sincerely hope you enjoy this release of FreeBSD!
-
-                        The FreeBSD Project
diff --git a/release/texts/i386/HARDWARE.TXT b/release/texts/i386/HARDWARE.TXT
index 9dcf03f..ab863be 100644
--- a/release/texts/i386/HARDWARE.TXT
+++ b/release/texts/i386/HARDWARE.TXT
@@ -20,7 +20,7 @@ throughout this document to differentiate it from the machine output.
 --      -------------------------------
 
 The following table contains a list of all of the devices that are
-present in the GENERIC kernel. This is the essential part of the 
+present in the GENERIC kernel.  This is the essential part of the 
 operating system that is placed in your root partition during the 
 installation process.  A compressed version of the GENERIC kernel is
 also used on the installation floppy diskette and DOS boot image.
@@ -86,6 +86,7 @@ sio1    2f8     3       n/a     n/a     Serial Port 1 (COM2)
 lpt0    dyn     7       n/a     n/a     Printer Port 0
 lpt1    dyn     dyn     n/a     n/a     Printer Port 1
 
+al0     dyn     dyn     n/a     dyn     ADMtek AL981 PCI based cards
 ax0     dyn     dyn     n/a     dyn     ASIX AX88140A PCI based cards
 de0     n/a     n/a     n/a     n/a     DEC DC21x40 PCI based cards
                                         (including 21140 100bT cards)
@@ -94,13 +95,12 @@ ed0     280     10      dyn     d8000   WD & SMC 80xx; Novell NE1000 &
 eg0     310     5       dyn     dyn     3Com 3C505
 ep0     300     10      dyn     dyn     3Com 3C509
 ex0     dyn     dyn     dyn     n/a     Intel EtherExpress Pro/10 cards
-fe0     300     dyn     n/a     n/a     Allied-Telesis AT1700, RE2000 and
+fe0     300     dyn     n/a     n/a     Allied-Telesyn AT1700, RE2000 and
                                         Fujitsu FMV-180 series cards.
 fxp0    dyn     dyn     n/a     dyn     Intel EtherExpress Pro/100B
 ie0     300     10      dyn     d0000   AT&T StarLAN 10 and EN100;
-                                        3Com 3C507; NI5210
-ix0     300     10      dyn     d0000   Intel EtherExpress cards
-ex0     dyn     dyn     dyn     dyn     Intel EtherExpress Pro/10 cards
+                                        3Com 3C507; NI5210; 
+                                        Intel EtherExpress (8/16,16[TP]) cards
 le0     300     5       dyn     d0000   Digital Equipment EtherWorks
                                         2 and EtherWorks 3
 lnc0    280     10      n/a     dyn     Lance/PCnet cards
@@ -109,13 +109,14 @@ lnc0    280     10      n/a     dyn     Lance/PCnet cards
 mx0     dyn     dyn     n/a     dyn     Macronix 98713/15/25 PCI based cards
 pn0     dyn     dyn     n/a     dyn     Lite-On PNIC PCI based cards
 rl0     dyn     dyn     n/a     dyn     RealTek 8129/8139 fast ethernet
-ti0     dyn     dyn     n/a     dyn     Alteon Networks gigabit ethernet
+sf0     dyn     dyn     n/a     dyn     Adaptec AIC-6915 fast ethernet
+ste0    dyn     dyn     n/a     dyn     Sundance ST201 fast ethernet
 tl0     dyn     dyn     n/a     dyn     TI TNET100 'ThunderLAN' cards.
 wb0     dyn     dyn     n/a     dyn     Winbond W89C840F PCI based cards.
 vr0     dyn     dyn     n/a     dyn     VIA VT3043/VT86C100A PCI based cards.
 vx0     dyn     dyn     n/a     dyn     3Com 3c59x ((Fast) Etherlink III)
-xl0     dyn     dyn     n/a     dyn     3Com 3c900, 3c905 and 3c905B
-                                        ((Fast) Etherlink XL)
+xl0     dyn     dyn     n/a     dyn     3Com 3c900, 3c905, 3c905B, 3c905C,
+                                        3c980, 3cSOHO100 ((Fast) Etherlink XL)
 cs0     0x300   dyn     n/a     n/a     Crystal Semiconductor CS89x0-based
                                         cards.
 ze0     300     5       n/a     d8000   IBM/National Semiconductor
@@ -259,7 +260,7 @@ section 6 of FreeBSD.FAQ).  The LINT configuration file
 (/sys/i386/conf/LINT) also contains prototype entries for just about
 every device supported by FreeBSD and is a good general reference.
 
-The device names and a short description of each are listed below. The port
+The device names and a short description of each are listed below.  The port
 numbers, etc, are not meaningful here since you will need to compile a
 custom kernel to gain access to these devices anyway and can thus
 adjust the addresses to match the hardware in your computer in the process.
@@ -421,7 +422,15 @@ Unmaintained drivers, they might or might not work for your hardware:
 4.2.    Network cards
 ----    -------------
 
-Allied-Telesis AT1700 and RE2000 cards
+Adaptec Duralink PCI fast ethernet adapters based on the Adaptec
+AIC-6915 fast ethernet controller chip, including the following:
+  ANA-62011 64-bit single port 10/100baseTX adapter
+  ANA-62022 64-bit dual port 10/100baseTX adapter
+  ANA-62044 64-bit quad port 10/100baseTX adapter
+  ANA-69011 32-bit single port 10/100baseTX adapter
+  ANA-62020 64-bit single port 100baseFX adapter
+
+Allied-Telesyn AT1700 and RE2000 cards
 
 Alteon Networks PCI gigabit ethernet NICs based on the Tigon 1 and Tigon 2
 chipsets, including the following:
@@ -454,6 +463,7 @@ Lite-On 82c168/82c169 PNIC fast ethernet NICs including the following:
   LinkSys EtherFast LNE100TX
   NetGear FA310-TX Rev. D1
   Matrox FastNIC 10/100
+  Kingston KNE110TX
 
 Macronix 98713, 98713A, 98715, 98715A and 98725 fast ethernet NICs
   NDC Communications SFA100A (98713A)
@@ -461,13 +471,26 @@ Macronix 98713, 98713A, 98715, 98715A and 98725 fast ethernet NICs
   CNet Pro120B (98715)
   SVEC PN102TX (98713)
 
+Macronix/Lite-On PNIC II LC82C115 fast ethernet NICs including the following:
+  LinkSys EtherFast LNE100TX Version 2
+
 Winbond W89C840F fast ethernet NICs including the following:
   Trendware TE100-PCIE
 
 VIA Technologies VT3043 "Rhine I" and VT86C100A "Rhine II" fast ethernet
 NICs including the following:
   Hawking Technologies PN102TX
-  D-Link DFE530TX
+  D-Link DFE-530TX
+
+Sundance Technologies ST201 PCI fast ethernet NICs including
+the following:
+  D-Link DFE-550TX
+
+SysKonnect SK-984x PCI gigabit ethernet cards including the following:
+  SK-9841 1000baseLX single mode fiber, single port
+  SK-9842 1000baseSX multimode fiber, single port
+  SK-9843 1000baseLX single mode fiber, dual port
+  SK-9844 1000baseSX multimode fiber, dual port
 
 Texas Instruments ThunderLAN PCI NICs, including the following:
   Compaq Netelligent 10, 10/100, 10/100 Proliant, 10/100 Dual-Port
@@ -477,6 +500,8 @@ Texas Instruments ThunderLAN PCI NICs, including the following:
   Racore 8165 10/100baseTX
   Racore 8148 10baseT/100baseTX/100baseFX multi-personality
 
+ADMtek AL981-based PCI fast ethernet NICs
+
 ASIX Electronics AX88140A PCI NICs, including the following:
   Alfa Inc. GFC2204
   CNet Pro110B
@@ -513,10 +538,12 @@ Winbond W89C940, Surecom NE-34, VIA VT86C926.
 
 3Com 3C507 Etherlink 16/TP
 
-3Com 3C509, 3C579, 3C589 (PCMCIA), 3C590/592/595/900/905/905B PCI and EISA
-(Fast) Etherlink III / (Fast) Etherlink XL
+3Com 3C509, 3C579, 3C589 (PCMCIA), 3C590/592/595/900/905/905B/905C PCI
+and EISA (Fast) Etherlink III / (Fast) Etherlink XL
 
-3Com 3c980 Fast Etherlink XL server adapter
+3Com 3c980/3c980B Fast Etherlink XL server adapter
+
+3Com 3cSOHO100-TX OfficeConnect adapter
 
 Toshiba ethernet cards
 
@@ -572,9 +599,13 @@ Agiler Mouse 29UO.
 
 Andromeda hub.
 
+Apple iMac mouse.
+Apple iMac keyboard.
+
 ATen parallel printer adapter.
 
 Belkin F5U002 parallel printer adapter.
+Belkin Mouse.
 
 BTC BTC7935 keyboard with mouse port.
 
@@ -596,6 +627,7 @@ Logitech M2452 keyboard.
 Logitech wheel mouse (3 buttons).
 Logitech PS/2 / USB mouse (3 buttons).
 
+MacAlly mouse (3 buttons).
 MacAlly self powered hub (4 ports).
 
 Microsoft IntelliMouse (3 buttons).
@@ -603,14 +635,18 @@ Microsoft keyboard.
 
 NEC hub.
 
+Trust Ami Mouse (3 buttons).
+
 
 4.4.    ISDN (European DSS1 [Q.921/Q.931] protocol)
 ----    -------------------------------------------
 
 Asuscom I-IN100-ST-DV (experimental, may work)
+Asuscom ISDNlink 128K PnP
 
 AVM A1
-AVM Fritz!Card classic ISA non-PnP
+AVM Fritz!Card classic
+AVM Fritz!Card PnP
 AVM Fritz!Card PCI
 AVM Fritz!Card PCMCIA
 
@@ -622,19 +658,22 @@ Dr.Neuhaus Niccy 1008
 Dr.Neuhaus Niccy 1016
 Dr.Neuhaus Niccy GO@ (ISA PnP)
 
-Dynalink IS64PH
+Dynalink IS64PH (no longer maintained)
 
 ELSA 1000pro ISA
 ELSA 1000pro PCI
 ELSA PCC-16
 
 ITK ix1 micro
+ITK ix1 micro PnP
 
 Sagem Cybermod (ISA PnP, may work)
 
 Sedlbauer Win Speed
 
-Stollmann Tina-pp
+Siemens I-Surf 2.0
+
+Stollmann Tina-pp (under development)
 
 Teles S0/8
 Teles S0/16
@@ -696,7 +735,11 @@ Genius and Mustek hand scanners.
 
 Floppy tape drives (some rather old models only, driver rather stale)
 
-Lucent Technologies WaveLAN/IEEE 802.11 PCMCIA network adapters and
-workalikes (NCR WaveLAN/IEEE 802.11, Cabletron RoamAbout)
+Lucent Technologies WaveLAN/IEEE 802.11 PCMCIA and ISA standard speed
+(2Mbps) and turbo speed (6Mbps) wireless network adapters and workalikes
+(NCR WaveLAN/IEEE 802.11, Cabletron RoamAbout 802.11 DS).  Note: the
+ISA versions of these adapters are actually PCMCIA cards combined with
+an ISA to PCMCIA bridge card, so both kinds of devices work with
+the same driver.
 
 FreeBSD currently does NOT support IBM's microchannel (MCA) bus.
diff --git a/release/texts/i386/RELNOTES.TXT b/release/texts/i386/RELNOTES.TXT
index c32498f..1442291 100644
--- a/release/texts/i386/RELNOTES.TXT
+++ b/release/texts/i386/RELNOTES.TXT
@@ -62,11 +62,28 @@ Support has been added for direct access to NTFS filesystems.
 
 Driver support has been added for PCI gigabit ethernet adapters
 based on the Alteon Networks Tigon 1 and Tigon 2 chipsets, including
-the Alteon AceNIC, 3Com 3c985 and Netgear GA620.
+the Alteon AceNIC, 3Com 3c985 and Netgear GA620. [MERGED]
 
 Driver support has been added for IEEE 802.11 PCMCIA wireless network
 adapters based on the Lucent Hermes chipset, including the Lucent
-WaveLAN/IEEE 802.11 and the Cabletron RoamAbout.
+WaveLAN/IEEE 802.11 and the Cabletron RoamAbout.  Both 2Mbps and
+6Mbps Turbo adapters are supported. [MERGED]
+
+Driver support has been added for PCI fast ethernet cards based
+on the ADMtek Inc. AL981 Comet chipset. [MERGED]
+
+Support has been added for the Rise mP6 processor. [MERGED]
+
+Driver support has been added for SysKonnect SK-984x PCI gigabit
+ethernet adapters.
+
+Driver support has been added for Adaptec Duralink PCI ethernet adapters
+based on the Adaptec AIC-6915 fast ethernet controller.
+
+Driver support has been added for PCI fast ethernet adapters based on
+the Sundance Technologies ST201 controller, including the D-Link DFE-550TX.
+
+Driver support has been added for the 3Com 3c905C-TX. [MERGED]
 
 1.2. SECURITY FIXES
 -------------------
@@ -211,6 +228,15 @@ Unmaintained drivers, they might or might not work for your hardware:
 
 2.2. Ethernet cards
 -------------------
+
+Adaptec Duralink PCI fast ethernet adapters based on the Adaptec
+AIC-6915 fast ethernet controller chip, including the following:
+  ANA-62011 64-bit single port 10/100baseTX adapter
+  ANA-62022 64-bit dual port 10/100baseTX adapter
+  ANA-62044 64-bit quad port 10/100baseTX adapter
+  ANA-69011 32-bit single port 10/100baseTX adapter
+  ANA-62020 64-bit single port 100baseFX adapter
+
 Allied-Telesis AT1700 and RE2000 cards
 
 Alteon Networks PCI gigabit ethernet NICs based on the Tigon 1 and Tigon 2
@@ -244,6 +270,7 @@ Lite-On 82c168/82c169 PNIC fast ethernet NICs including the following:
   LinkSys EtherFast LNE100TX
   NetGear FA310-TX Rev. D1
   Matrox FastNIC 10/100
+  Kingston KNE110TX
 
 Macronix 98713, 98713A, 98715, 98715A and 98725 fast ethernet NICs
   NDC Communications SFA100A (98713A)
@@ -251,13 +278,26 @@ Macronix 98713, 98713A, 98715, 98715A and 98725 fast ethernet NICs
   CNet Pro120B (98715)
   SVEC PN102TX (98713)
 
+Macronix/Lite-On PNIC II LC82C115 fast ethernet NICs including the following:
+  LinkSys EtherFast LNE100TX Version 2
+
 Winbond W89C840F fast ethernet NICs including the following:
   Trendware TE100-PCIE
 
 VIA Technologies VT3043 "Rhine I" and VT86C100A "Rhine II" fast ethernet
 NICs including the following:
   Hawking Technologies PN102TX
-  D-Link DFE530TX
+  D-Link DFE-530TX
+
+Sundance Technologies ST201 PCI fast ethernet NICs including
+the following:
+  D-Link DFE-550TX
+
+SysKonnect SK-984x PCI gigabit ethernet cards including the following:
+  SK-9841 1000baseLX single mode fiber, single port
+  SK-9842 1000baseSX multimode fiber, single port
+  SK-9843 1000baseLX single mode fiber, dual port
+  SK-9844 1000baseSX multimode fiber, dual port
 
 Texas Instruments ThunderLAN PCI NICs, including the following:
   Compaq Netelligent 10, 10/100, 10/100 Proliant, 10/100 Dual-Port
@@ -267,6 +307,8 @@ Texas Instruments ThunderLAN PCI NICs, including the following:
   Racore 8165 10/100baseTX
   Racore 8148 10baseT/100baseTX/100baseFX multi-personality
 
+ADMtek Inc. AL981-based PCI fast ethernet NICs
+
 ASIX Electronics AX88140A PCI NICs, including the following:
   Alfa Inc. GFC2204
   CNet Pro110B
@@ -300,10 +342,12 @@ Winbond W89C940, Surecom NE-34, VIA VT86C926.
 
 3Com 3C507 Etherlink 16/TP
 
-3Com 3C509, 3C579, 3C589 (PCMCIA), 3C590/592/595/900/905/905B PCI and EISA
-(Fast) Etherlink III / (Fast) Etherlink XL
+3Com 3C509, 3C579, 3C589 (PCMCIA), 3C590/592/595/900/905/905B/905C PCI
+and EISA (Fast) Etherlink III / (Fast) Etherlink XL
+
+3Com 3c980/3c980B Fast Etherlink XL server adapter
 
-3Com 3c980 Fast Etherlink XL server adapter
+3Com 3cSOHO100-TX OfficeConnect adapter
 
 Toshiba ethernet cards
 
@@ -402,6 +446,13 @@ the HOT1 from Virtual Computers (www.vcc.com)
 
 Support for Dave Mills experimental Loran-C receiver.
 
+Lucent Technologies WaveLAN/IEEE 802.11 PCMCIA and ISA standard speed
+(2Mbps) and turbo speed (6Mbps) wireless network adapters and workalikes
+(NCR WaveLAN/IEEE 802.11, Cabletron RoamAbout 802.11 DS). Note: the
+ISA versions of these adapters are actually PCMCIA cards combined with
+an ISA to PCMCIA bridge card, so both kinds of devices work with
+the same driver.
+
 FreeBSD currently does NOT support IBM's microchannel (MCA) bus.
 
 3. Obtaining FreeBSD