diff options
author | jkh <jkh@FreeBSD.org> | 1999-09-06 15:10:54 +0000 |
---|---|---|
committer | jkh <jkh@FreeBSD.org> | 1999-09-06 15:10:54 +0000 |
commit | 2dd43ec810a70fa65d266e2dfc20e9ee4e3db223 (patch) | |
tree | 4034924e5f1cfbe12f888082e038c2f2681ba58e /release/texts | |
parent | 6a139b598244e8aefd10cf234836a9682e1a6039 (diff) | |
download | FreeBSD-src-2dd43ec810a70fa65d266e2dfc20e9ee4e3db223.zip FreeBSD-src-2dd43ec810a70fa65d266e2dfc20e9ee4e3db223.tar.gz |
VERY preliminary versions of these documents for the Alpha. I've
made only the most superficial changes so far to HARDWARE.TXT and
eliminated the stuff I absolutely knew didn't work. That still leaves
a lot of work to do and this is mostly just a place-holder for now.
Diffstat (limited to 'release/texts')
-rw-r--r-- | release/texts/alpha/HARDWARE.TXT | 619 | ||||
-rw-r--r-- | release/texts/alpha/RELNOTES.TXT | 647 |
2 files changed, 1266 insertions, 0 deletions
diff --git a/release/texts/alpha/HARDWARE.TXT b/release/texts/alpha/HARDWARE.TXT new file mode 100644 index 0000000..9d67752 --- /dev/null +++ b/release/texts/alpha/HARDWARE.TXT @@ -0,0 +1,619 @@ +Table of Contents +----------------- +0. Document Conventions +1. Default Configuration (GENERIC kernel) +2. LINT - other possible configurations +3. Supported Hardware + +See TROUBLE.TXT for Q&A on known hardware problems. + +========================================================================= + +0. Document Conventions +-- -------------------- + +We have `underlined' text which represents user input with `-' symbols +throughout this document to differentiate it from the machine output. + +1. Default (GENERIC) Configuration +-- ------------------------------- + +The following table contains a list of all of the devices that are +present in the GENERIC kernel. This is the essential part of the +operating system that is placed in your root partition during the +installation process. A compressed version of the GENERIC kernel is +also used on the installation floppy diskette and DOS boot image. + +The table describes the various parameters used by the driver to +communicate with the hardware in your system. There are four +parameters in the table, though not all are used by each and every +device: + + Port The starting I/O port used by the device, shown in hexadecimal. + + IOMem The lowest (or starting) memory address used by the device, + also shown in hexadecimal. + + IRQ The interrupt the device uses to alert the driver to an event, + given in decimal. + + DRQ The DMA (direct memory access) channel the device uses to move + data to and from main memory, also given in decimal. + +If an entry in the table has `n/a' for a value then it means that the +parameter in question does not apply to that device. A value of `dyn' +means that the correct value should be determined automatically by the +kernel when the system boots and that you don't need to worry about +it. + +If an entry is marked with an *, it means that support is currently +not available for it but should be back as soon as someone converts +the driver to work within the new 3.0 framework. + +FreeBSD GENERIC kernel: + + Port IRQ DRQ IOMem Description + ---- --- --- ----- --------------------------------- +fdc0 3f0 6 2 n/a Floppy disk controller +wdc0 1f0 14 n/a n/a IDE/MFM/RLL disk controller +wdc1 170 15 n/a n/a IDE/MFM/RLL disk controller + +adv0 n/a n/a n/a n/a AdvanSys Narrow SCSI controllers +adw0 n/a n/a n/a n/a AdvanSys Wide SCSI controllers +ncr0 n/a n/a n/a n/a NCR PCI SCSI controller +bt0 330 dyn dyn dyn Buslogic SCSI controller +uha0* 330 dyn 6 dyn Ultrastore 14f +aha0 330 dyn 5 dyn Adaptec 154x/1535 SCSI controller +ahb0 dyn dyn dyn dyn Adaptec 174x SCSI controller +ahc0 dyn dyn dyn dyn Adaptec 274x/284x/294x SCSI controller +aic0* 340 11 dyn dyn Adaptec 152x/AIC-6360 SCSI + controller +isp0 dyn dyn dyn dyn QLogic 10X0, 2100 SCSI/FC controllers +dpt n/a n/a n/a n/a DPT RAID SCSI controllers. + +wt0 300 5 1 dyn Wangtek and Archive QIC-02/QIC-36 + +psm0 60 12 n/a n/a PS/2 Mouse + +mcd0 300 10 n/a n/a Mitsumi CD-ROM +matcd0 230 n/a n/a n/a Matsushita/Panasonic CD-ROM +scd0 230 n/a n/a n/a Sony CD-ROM + +sio0 3f8 4 n/a n/a Serial Port 0 (COM1) +sio1 2f8 3 n/a n/a Serial Port 1 (COM2) + +lpt0 dyn 7 n/a n/a Printer Port 0 +lpt1 dyn dyn n/a n/a Printer Port 1 + +al0 dyn dyn n/a dyn ADMtek AL981 PCI based cards +ax0 dyn dyn n/a dyn ASIX AX88140A PCI based cards +de0 n/a n/a n/a n/a DEC DC21x40 PCI based cards + (including 21140 100bT cards) +dm0 n/a n/a n/a n/a Davicom DM9100/DM9102 PCI based cards +ed0 280 10 dyn d8000 WD & SMC 80xx; Novell NE1000 & + NE2000; 3Com 3C503; HP PC Lan+ +eg0 310 5 dyn dyn 3Com 3C505 +ep0 300 10 dyn dyn 3Com 3C509 +ex0 dyn dyn dyn n/a Intel EtherExpress Pro/10 cards +fe0 300 dyn n/a n/a Allied-Telesyn AT1700, RE2000 and + Fujitsu FMV-180 series cards. +fxp0 dyn dyn n/a dyn Intel EtherExpress Pro/100B +ie0 300 10 dyn d0000 AT&T StarLAN 10 and EN100; + 3Com 3C507; NI5210; + Intel EtherExpress (8/16,16[TP]) cards +le0 300 5 dyn d0000 Digital Equipment EtherWorks + 2 and EtherWorks 3 +lnc0 280 10 n/a dyn Lance/PCnet cards + (Isolan, Novell NE2100, NE32-VL, + some PCnet-PCI cards) +mx0 dyn dyn n/a dyn Macronix 98713/15/25 PCI based cards +pn0 dyn dyn n/a dyn Lite-On PNIC PCI based cards +rl0 dyn dyn n/a dyn RealTek 8129/8139 fast ethernet +sf0 dyn dyn n/a dyn Adaptec AIC-6915 fast ethernet +sis0 dyn dyn n/a dyn SiS 900/SiS 7016 fast ethernet +ste0 dyn dyn n/a dyn Sundance ST201 fast ethernet +tl0 dyn dyn n/a dyn TI TNET100 'ThunderLAN' cards. +wb0 dyn dyn n/a dyn Winbond W89C840F PCI based cards. +vr0 dyn dyn n/a dyn VIA VT3043/VT86C100A PCI based cards. +vx0 dyn dyn n/a dyn 3Com 3c59x ((Fast) Etherlink III) +xl0 dyn dyn n/a dyn 3Com 3c900, 3c905, 3c905B, 3c905C, + 3c980, 3cSOHO100 ((Fast) Etherlink XL) +cs0 0x300 dyn n/a n/a Crystal Semiconductor CS89x0-based + cards. +ze0 300 5 n/a d8000 IBM/National Semiconductor + PCMCIA Ethernet Controller +zp0 300 10 n/a d8000 3Com 3c589 Etherlink III + PCMCIA Ethernet Controller +--- End of table --- + + +If the hardware in your computer is not set to the same settings as +those shown in the table and the item in conflict is not marked 'dyn', +you will have to either reconfigure your hardware or use UserConfig +to reconfigure the kernel to match the way your hardware is currently set +(see the next section). + +If the settings do not match, the kernel may be unable to locate +or reliably access the devices in your system. + + +2. LINT - other possible configurations +-- ------------------------------------ + +The following drivers are not in the GENERIC kernel but remain +available to those who do not mind compiling a custom kernel (see +section 6 of FreeBSD.FAQ). The LINT configuration file +(/sys/i386/conf/LINT) also contains prototype entries for just about +every device supported by FreeBSD and is a good general reference. + +The device names and a short description of each are listed below. The port +numbers, etc, are not meaningful here since you will need to compile a +custom kernel to gain access to these devices anyway and can thus +adjust the addresses to match the hardware in your computer in the process. +The LINT file contains prototype entries for all of the below which you +can easily cut-and-paste into your own file (or simply copy LINT and edit +it to taste): + +ctx: Cortex-I frame grabber +cx: Cronyx/Sigma multiport sync/async +cy: Cyclades high-speed serial driver +el: 3Com 3C501 +fea: DEC DEFEA EISA FDDI adapter +fpa: DEC DEFPA PCI FDDI adapter +gp: National Instruments AT-GPIB and AT-GPIB/TNT board +gsc: Genius GS-4500 hand scanner +gus: Gravis Ultrasound - Ultrasound, Ultrasound 16, Ultrasound MAX +gusxvi: Gravis Ultrasound 16-bit PCM +hea: Efficient ENI-155p ATM PCI adapter +hfa: FORE PCA-200E ATM PCI adapter +isic: isdn4bsd Siemens ISDN Chipset driver +joy: Joystick +labpc: National Instrument's Lab-PC and Lab-PC+ +meteor: Matrox Meteor frame-grabber card +bktr: Brooktree Bt848 / Bt 878 based frame-grabber cards. +mpu: Roland MPU-401 stand-alone card +mse: Microsoft, Logitech, ATI bus mouse ports +mss: Microsoft Sound System +opl: Yamaha OPL-2 and OPL-3 FM - SB, SB Pro, SB 16, ProAudioSpectrum +pas: ProAudioSpectrum PCM and MIDI +pca: PCM audio ("/dev/audio") through your PC speaker +pcm: PCM audio on most modern ISA audio codecs +psm: PS/2 mouse port +rc: RISCom/8 multiport card +sb: SoundBlaster PCM - SoundBlaster, SB Pro, SB16, ProAudioSpectrum +sbmidi: SoundBlaster 16 MIDI interface +sbxvi: SoundBlaster 16 +si: Specialix SI/XIO/SX (old and enhanced ISA, PCI, EISA) serial +spigot: Creative Labs Video Spigot video-acquisition board +uart: Stand-alone 6850 UART for MIDI +wds: Western Digital WD7000 IDE + +--- end of list --- + + +3. Supported Hardware +-- ------------------ + +FreeBSD currently runs on a wide variety of ISA and PCI bus based +Alphas's. Support for generic IDE or ESDI drive configurations is +somewhat marginal and a SCSI controller is therefore recommended. + +What follows is a list of all peripherals currently known to work with +FreeBSD. Other configurations may also work, we have simply not as yet +received confirmation of this. + + +4.1. Disk Controllers +---- ---------------- + +WD1003 (any generic MFM/RLL) +WD1007 (any generic IDE/ESDI) +IDE +ATA + +Adaptec 1535 ISA SCSI controllers +Adaptec 154x series ISA SCSI controllers +Adaptec 174x series EISA SCSI controller in standard and enhanced mode. +Adaptec 274X/284X/2920C/294x/2950/3940/3950 (Narrow/Wide/Twin) series +EISA/VLB/PCI SCSI controllers. +Adaptec AIC7850, AIC7860, AIC7880, AIC789x, on-board SCSI controllers. + +AdvanSys SCSI controllers (all models). + +BusLogic MultiMaster controllers: + +[ Please note that BusLogic/Mylex "Flashpoint" adapters are NOT yet supported ] + +BusLogic MultiMaster "W" Series Host Adapters: + BT-948, BT-958, BT-958D +BusLogic MultiMaster "C" Series Host Adapters: + BT-946C, BT-956C, BT-956CD, BT-445C, BT-747C, BT-757C, BT-757CD, BT-545C, + BT-540CF +BusLogic MultiMaster "S" Series Host Adapters: + BT-445S, BT-747S, BT-747D, BT-757S, BT-757D, BT-545S, BT-542D, BT-742A, + BT-542B +BusLogic MultiMaster "A" Series Host Adapters: + BT-742A, BT-542B + +AMI FastDisk controllers that are true BusLogic MultiMaster clones are also +supported. + +DPT SmartCACHE Plus, SmartCACHE III, SmartRAID III, SmartCACHE IV and +SmartRAID IV SCSI/RAID controllers are supported. The DPT SmartRAID/CACHE V +is not yet supported. + +SymBios (formerly NCR) 53C810, 53C810a, 53C815, 53C820, 53C825a, +53C860, 53C875, 53C875j, 53C885, 53C895 and 53C896 PCI SCSI controllers: + ASUS SC-200 + Data Technology DTC3130 (all variants) + Diamond FirePort (all) + NCR cards (all) + Symbios cards (all) + Tekram DC390W, 390U and 390F + Tyan S1365 + + +QLogic 1020, 1040, 1040B and 2100 SCSI and Fibre Channel Adapters + +DTC 3290 EISA SCSI controller in 1542 emulation mode. + +With all supported SCSI controllers, full support is provided for +SCSI-I & SCSI-II peripherals, including hard disks, optical disks, +tape drives (including DAT and 8mm Exabyte), medium changers, processor +target devices and CDROM drives. WORM devices that support CDROM commands +are supported for read-only access by the CDROM driver. WORM/CD-R/CD-RW +writing support is provided by cdrecord, which is in the ports tree. + +The following drivers were supported under the old SCSI subsystem, but are +NOT YET supported under the new CAM SCSI subsystem: + + Tekram DC390 and DC390T controllers (maybe other cards based on the + AMD 53c974 as well). + + NCR5380/NCR53400 ("ProAudio Spectrum") SCSI controller. + + UltraStor 14F, 24F and 34F SCSI controllers. + + Seagate ST01/02 SCSI controllers. + + Future Domain 8xx/950 series SCSI controllers. + + WD7000 SCSI controller. + + Adaptec 1510 series ISA SCSI controllers (not for bootable devices) + Adaptec 152x series ISA SCSI controllers + Adaptec AIC-6260 and AIC-6360 based boards, which includes the AHA-152x + and SoundBlaster SCSI cards. + + [ Note: There is work-in-progress to port the AIC-6260/6360 and + UltraStor drivers to the new CAM SCSI framework, but no estimates on + when or if they will be completed. ] + +4.2. Network cards +---- ------------- + +Adaptec Duralink PCI fast ethernet adapters based on the Adaptec +AIC-6915 fast ethernet controller chip, including the following: + ANA-62011 64-bit single port 10/100baseTX adapter + ANA-62022 64-bit dual port 10/100baseTX adapter + ANA-62044 64-bit quad port 10/100baseTX adapter + ANA-69011 32-bit single port 10/100baseTX adapter + ANA-62020 64-bit single port 100baseFX adapter + +Allied-Telesyn AT1700 and RE2000 cards + +Alteon Networks PCI gigabit ethernet NICs based on the Tigon 1 and Tigon 2 +chipsets, including the following: + Alteon AceNIC (Tigon 1 and 2) + 3Com 3c985-SX (Tigon 1 and 2) + Netgear GA620 (Tigon 2) + Silicon Graphics Gigabit Ethernet + DEC/Compaq EtherWORKS 1000 + NEC Gigabit Ethernet + +AMD PCnet/PCI (79c970 & 53c974 or 79c974) + +SMC Elite 16 WD8013 ethernet interface, and most other WD8003E, +WD8003EBT, WD8003W, WD8013W, WD8003S, WD8003SBT and WD8013EBT +based clones. SMC Elite Ultra is also supported. + +RealTek 8129/8139 fast ethernet NICs including the following: + Allied Telesyn AT2550 + Allied Telesyn AT2500TX + Genius GF100TXR (RTL8139) + NDC Communications NE100TX-E + OvisLink LEF-8129TX + OvisLink LEF-8139TX + Netronix Inc. EA-1210 NetEther 10/100 + KTX-9130TX 10/100 Fast Ethernet + Accton "Cheetah" EN1027D (MPX 5030/5038; RealTek 8139 clone?) + SMC EZ Card 10/100 PCI 1211-TX + +Lite-On 82c168/82c169 PNIC fast ethernet NICs including the following: + LinkSys EtherFast LNE100TX + NetGear FA310-TX Rev. D1 + Matrox FastNIC 10/100 + Kingston KNE110TX + +Macronix 98713, 98713A, 98715, 98715A and 98725 fast ethernet NICs + NDC Communications SFA100A (98713A) + CNet Pro120A (98713 or 98713A) + CNet Pro120B (98715) + SVEC PN102TX (98713) + +Macronix/Lite-On PNIC II LC82C115 fast ethernet NICs including the following: + LinkSys EtherFast LNE100TX Version 2 + +Winbond W89C840F fast ethernet NICs including the following: + Trendware TE100-PCIE + +VIA Technologies VT3043 "Rhine I" and VT86C100A "Rhine II" fast ethernet +NICs including the following: + Hawking Technologies PN102TX + D-Link DFE-530TX + +Silicon Integrated Systems SiS 900 and SiS 7016 PCI fast ethernet NICs + +Sundance Technologies ST201 PCI fast ethernet NICs including +the following: + D-Link DFE-550TX + +SysKonnect SK-984x PCI gigabit ethernet cards including the following: + SK-9841 1000baseLX single mode fiber, single port + SK-9842 1000baseSX multimode fiber, single port + SK-9843 1000baseLX single mode fiber, dual port + SK-9844 1000baseSX multimode fiber, dual port + +Texas Instruments ThunderLAN PCI NICs, including the following: + Compaq Netelligent 10, 10/100, 10/100 Proliant, 10/100 Dual-Port + Compaq Netelligent 10/100 TX Embedded UTP, 10 T PCI UTP/Coax, 10/100 TX UTP + Compaq NetFlex 3P, 3P Integrated, 3P w/ BNC + Olicom OC-2135/2138, OC-2325, OC-2326 10/100 TX UTP + Racore 8165 10/100baseTX + Racore 8148 10baseT/100baseTX/100baseFX multi-personality + +ADMtek AL981-based PCI fast ethernet NICs + +ASIX Electronics AX88140A PCI NICs, including the following: + Alfa Inc. GFC2204 + CNet Pro110B + +DEC EtherWORKS III NICs (DE203, DE204, and DE205) +DEC EtherWORKS II NICs (DE200, DE201, DE202, and DE422) +DEC DC21040, DC21041, or DC21140 based NICs (SMC Etherpower 8432T, DE245, etc) +DEC FDDI (DEFPA/DEFEA) NICs + +Davicom DM9100 and DM9102 PCI fast ethernet NICs, including the +following: + Jaton Corporation XPressNet + +Efficient ENI-155p ATM PCI + +FORE PCA-200E ATM PCI + +Fujitsu MB86960A/MB86965A + +HP PC Lan+ cards (model numbers: 27247B and 27252A). + +Intel EtherExpress (not recommended due to driver instability) +Intel EtherExpress Pro/10 +Intel EtherExpress Pro/100B PCI Fast Ethernet + +Isolan AT 4141-0 (16 bit) +Isolink 4110 (8 bit) + +Novell NE1000, NE2000, and NE2100 ethernet interface. +PCI network cards emulating the NE2000: RealTek 8029, NetVin 5000, +Winbond W89C940, Surecom NE-34, VIA VT86C926. + +3Com 3C501 cards + +3Com 3C503 Etherlink II + +3Com 3c505 Etherlink/+ + +3Com 3C507 Etherlink 16/TP + +3Com 3C509, 3C579, 3C589 (PCMCIA), 3C590/592/595/900/905/905B/905C PCI +and EISA (Fast) Etherlink III / (Fast) Etherlink XL + +3Com 3c980/3c980B Fast Etherlink XL server adapter + +3Com 3cSOHO100-TX OfficeConnect adapter + +Toshiba ethernet cards + +PCMCIA ethernet cards from IBM and National Semiconductor are also +supported. + +Note that NO token ring cards are supported at this time as we're +still waiting for someone to donate a driver for one of them. Any +takers? + + +4.3. USB +---- --- + +A range of USB peripherals are supported. Owing to the generic nature +of most USB devices, with some exceptions any device of a given class +will be supported even if not explicitly listed here. + +USB keyboards. + +USB mice. + +USB printers and USB to parallel printer conversion cables. + +USB hubs. + + +Motherboards chipsets: + +ALi Aladdin-V. + +Intel 82371SB (PIIX3). +Intel 82371AB and EB chipsets (PIIX4). + +NEC uPD 9210 Host Controller. + +VIA 83C572 USB Host Controller + +and any other UHCI or OHCI compliant motherboard chipset (no exceptions +known). + + +PCI plug-in USB host controllers: + +ADS Electronics PCI plug-in card (2 ports). + +Entrega PCI plug-in card (4 ports). + + +Specific devices reported to be working: + +Agiler Mouse 29UO. + +Andromeda hub. + +Apple iMac mouse. +Apple iMac keyboard. + +ATen parallel printer adapter. + +Belkin F5U002 parallel printer adapter. +Belkin Mouse. + +BTC BTC7935 keyboard with mouse port. + +Cherry G81-3504 keyboard. + +Chic mouse. + +Cypress mouse. + +Entrega USB-to-parallel printer adapter. + +Genius Niche mouse. + +Iomega USB Zip 100Mb. + +Kensington Mouse-in-a-Box. + +Logitech M2452 keyboard. +Logitech wheel mouse (3 buttons). +Logitech PS/2 / USB mouse (3 buttons). + +MacAlly mouse (3 buttons). +MacAlly self powered hub (4 ports). + +Microsoft IntelliMouse (3 buttons). +Microsoft keyboard. + +NEC hub. + +Trust Ami Mouse (3 buttons). + + +4.4. ISDN (European DSS1 [Q.921/Q.931] protocol) +---- ------------------------------------------- + +Asuscom I-IN100-ST-DV (experimental, may work) +Asuscom ISDNlink 128K PnP + +AVM A1 +AVM Fritz!Card classic +AVM Fritz!Card PnP +AVM Fritz!Card PCI +AVM Fritz!Card PCMCIA + +Creatix ISDN-S0/8 +Creatix ISDN-S0/16 +Creatix ISDN-S0 PnP + +Dr.Neuhaus Niccy 1008 +Dr.Neuhaus Niccy 1016 +Dr.Neuhaus Niccy GO@ (ISA PnP) + +Dynalink IS64PH (no longer maintained) + +ELSA 1000pro ISA +ELSA 1000pro PCI +ELSA PCC-16 + +ITK ix1 micro +ITK ix1 micro PnP + +Sagem Cybermod (ISA PnP, may work) + +Sedlbauer Win Speed + +Siemens I-Surf 2.0 + +Stollmann Tina-pp (under development) + +Teles S0/8 +Teles S0/16 +Teles S0/16.3 (the "c" Versions - like 16.3c - are unsupported !) +Teles S0 PnP (experimental, may work) + +3Com/USRobotics Sportster ISDN TA intern (non-PnP version) + + +4.5. Misc +---- ---- + +AST 4 port serial card using shared IRQ. + +ARNET 8 port serial card using shared IRQ. +ARNET (now Digiboard) Sync 570/i high-speed serial. + +Boca BB1004 4-Port serial card (Modems NOT supported) +Boca IOAT66 6-Port serial card (Modems supported) +Boca BB1008 8-Port serial card (Modems NOT supported) +Boca BB2016 16-Port serial card (Modems supported) + +Cyclades Cyclom-y Serial Board. + +STB 4 port card using shared IRQ. + +SDL Communications Riscom/8 Serial Board. +SDL Communications RISCom/N2 and N2pci high-speed sync serial boards. + +Specialix SI/XIO/SX multiport serial cards, with both the older +SIHOST2.x and the new "enhanced" (transputer based, aka JET) host cards. +ISA, EISA and PCI are supported. + +Stallion multiport serial boards: EasyIO, EasyConnection 8/32 & 8/64, +ONboard 4/16 and Brumby. + +Adlib, SoundBlaster, SoundBlaster Pro, ProAudioSpectrum, Gravis UltraSound +and Roland MPU-401 sound cards. + +Connectix QuickCam +Matrox Meteor Video frame grabber +Creative Labs Video Spigot frame grabber +Cortex1 frame grabber +Various Frame grabbers based on Brooktree Bt848 and Bt878 chip. + +HP4020, HP6020, Philips CDD2000/CDD2660 and Plasmon CD-R drives. + +Bus mice + +PS/2 mice + +Standard PC Joystick + +X-10 power controllers + +GPIB and Transputer drivers. + +Genius and Mustek hand scanners. + +Floppy tape drives (some rather old models only, driver rather stale) + +Lucent Technologies WaveLAN/IEEE 802.11 PCMCIA and ISA standard speed +(2Mbps) and turbo speed (6Mbps) wireless network adapters and workalikes +(NCR WaveLAN/IEEE 802.11, Cabletron RoamAbout 802.11 DS). Note: the +ISA versions of these adapters are actually PCMCIA cards combined with +an ISA to PCMCIA bridge card, so both kinds of devices work with +the same driver. diff --git a/release/texts/alpha/RELNOTES.TXT b/release/texts/alpha/RELNOTES.TXT new file mode 100644 index 0000000..1c32f85 --- /dev/null +++ b/release/texts/alpha/RELNOTES.TXT @@ -0,0 +1,647 @@ + RELEASE NOTES + FreeBSD Release 4.0-SNAP + +This is a 4.0-CURRENT release SNAPshot of FreeBSD, an active +development branch which is not expected to produce a release for +some time. This line of development branched from the 3.x line +on January 20, 1999; that branch will see continuing releases and +some features of 4.0 will be back-ported. + +Any installation failures or crashes should be reported by using the +send-pr command (those preferring a Web-based interface can also see +http://www.freebsd.org/send-pr.html). + +For information about FreeBSD and the layout of the 4.0-RELEASE +directory (especially if you're installing from floppies!), see +ABOUT.TXT. For installation instructions, see the INSTALL.TXT and +HARDWARE.TXT files. + +For the latest of these 4.0-current snapshots, you should always see: + + ftp://current.freebsd.org/pub/FreeBSD + +If you wish to get the latest post-3.x-RELEASE technology. + +Table of contents: +------------------ +1. What's new since the 3.1/4.0 branch + 1.1 KERNEL CHANGES + 1.2 SECURITY FIXES + 1.3 USERLAND CHANGES + +2. Supported Configurations + 2.1 Disk Controllers + 2.2 Ethernet cards + 2.3 ATM + 2.4 Misc + +3. Obtaining FreeBSD + 3.1 FTP/Mail + 3.2 CDROM + +4. Upgrading from previous releases of FreeBSD + +5. Reporting problems, making suggestions, submitting code +6. Acknowledgements + + +1. What's new since the 3.1/4.0 branch +-------------------------------------- +All changes described here are unique to the 4.0 branch unless +specifically marked as [MERGED] features. + +1.1. KERNEL CHANGES +------------------- + +The VM system's anonymous storage subsystem (the ``swap pager'') has +been completely revamped. + +An emulator for SVR4 binaries has been added. + +Support has been added for direct access to NTFS filesystems. + +Driver support has been added for PCI gigabit ethernet adapters +based on the Alteon Networks Tigon 1 and Tigon 2 chipsets, including +the Alteon AceNIC, 3Com 3c985 and Netgear GA620. [MERGED] + +Driver support has been added for IEEE 802.11 PCMCIA wireless network +adapters based on the Lucent Hermes chipset, including the Lucent +WaveLAN/IEEE 802.11 and the Cabletron RoamAbout. Both 2Mbps and +6Mbps Turbo adapters are supported. [MERGED] + +Driver support has been added for PCI fast ethernet cards based +on the ADMtek Inc. AL981 Comet chipset. [MERGED] + +Support has been added for the Rise mP6 processor. [MERGED] + +Driver support has been added for SysKonnect SK-984x PCI gigabit +ethernet adapters. + +Driver support has been added for Adaptec Duralink PCI ethernet adapters +based on the Adaptec AIC-6915 fast ethernet controller. + +Driver support has been added for PCI fast ethernet adapters based on +the Sundance Technologies ST201 controller, including the D-Link DFE-550TX. + +Driver support has been added for the 3Com 3c905C-TX. [MERGED] + +User- and group-based IPFW firewalling has been added. [MERGED] + +Support for probabalistic rule matching has been added to IPFW. [MERGED] + +IPFW logging is now dynamic. IPFW logging counts can be reset, and any +given rule can be given an arbitrary logging limit. [MERGED] + +The top-level category "security" has been added, and IPFW now uses +syslog(3) to log all messages to /var/log/security. + +Driver support has been added for PCI fast ethernet adapters based on +the Silicon Integrated Systems SiS 900 and SiS 7016 ethernet controllers. + +Driver support has been added for PCI fast ethernet adapters based on +the Davicom DM9100 and DM9102 ethernet controllers, including the Jaton +Corporation XpressNet. + +1.2. SECURITY FIXES +------------------- + +A new jail(2) system call and admin command (jail(8)) have been added for +additional flexibility in creating secure process execution environments. + + +1.3. USERLAND CHANGES +--------------------- + +The base C/C++ compiler has been upgraded from GCC 2.7.2 to EGCS 1.1.2. +This gives users full ISO C++ support. + +The timezone database has been updated to catch all of the recent changes +in Europe, the former Soviet Union, and Central and South America. +The timezone data files now contain a magic number allowing for easy +identification. + +The f77 emulation via f2c has been updated to a current version. + +The Internet Software Consortium's DHCP client has been added to the +base system. + +Groff/troff/eqn has been updated to version 1.11. + +Gdb has been updated to version 4.18 and is now part of the standard +release for FreeBSD/alpha. + + +2. Supported Configurations +--------------------------- +FreeBSD currently runs on a wide variety of ISA, VLB, EISA and PCI bus +based PC's, ranging from 386sx to Pentium class machines (though the +386sx is not recommended). Support for generic IDE or ESDI drive +configurations, various SCSI controller, network and serial cards is +also provided. + +What follows is a list of all peripherals currently known to work with +FreeBSD. Other configurations may also work, we have simply not as yet +received confirmation of this. + + +2.1. Disk Controllers +--------------------- +WD1003 (any generic MFM/RLL) +WD1007 (any generic IDE/ESDI) +IDE +ATA + +Adaptec 1535 ISA SCSI controllers +Adaptec 154x series ISA SCSI controllers +Adaptec 174x series EISA SCSI controller in standard and enhanced mode. +Adaptec 274X/284X/2920C/294x/2950/3940/3950 (Narrow/Wide/Twin) series +EISA/VLB/PCI SCSI controllers. +Adaptec AIC7850, AIC7860, AIC7880, AIC789x, on-board SCSI controllers. + +AdvanSys SCSI controllers (all models). + +BusLogic MultiMaster controllers: + +[ Please note that BusLogic/Mylex "Flashpoint" adapters are NOT yet supported ] + +BusLogic MultiMaster "W" Series Host Adapters: + BT-948, BT-958, BT-958D +BusLogic MultiMaster "C" Series Host Adapters: + BT-946C, BT-956C, BT-956CD, BT-445C, BT-747C, BT-757C, BT-757CD, BT-545C, + BT-540CF +BusLogic MultiMaster "S" Series Host Adapters: + BT-445S, BT-747S, BT-747D, BT-757S, BT-757D, BT-545S, BT-542D, BT-742A, + BT-542B +BusLogic MultiMaster "A" Series Host Adapters: + BT-742A, BT-542B + +AMI FastDisk controllers that are true BusLogic MultiMaster clones are also +supported. + +DPT SmartCACHE Plus, SmartCACHE III, SmartRAID III, SmartCACHE IV and +SmartRAID IV SCSI/RAID controllers are supported. The DPT SmartRAID/CACHE V +is not yet supported. + +SymBios (formerly NCR) 53C810, 53C810a, 53C815, 53C820, 53C825a, +53C860, 53C875, 53C875j, 53C885, 53C895 and 53C896 PCI SCSI controllers: + ASUS SC-200 + Data Technology DTC3130 (all variants) + Diamond FirePort (all) + NCR cards (all) + Symbios cards (all) + Tekram DC390W, 390U and 390F + Tyan S1365 + + +QLogic 1020, 1040, 1040B, 1080 and 1240 SCSI Host Adapters. +QLogic 2100 Fibre Channel Adapters (private loop only). + +DTC 3290 EISA SCSI controller in 1542 emulation mode. + +With all supported SCSI controllers, full support is provided for +SCSI-I & SCSI-II peripherals, including hard disks, optical disks, +tape drives (including DAT and 8mm Exabyte), medium changers, processor +target devices and CDROM drives. WORM devices that support CDROM commands +are supported for read-only access by the CDROM driver. WORM/CD-R/CD-RW +writing support is provided by cdrecord, which is in the ports tree. + +The following CD-ROM type systems are supported at this time: +(cd) SCSI interface (also includes ProAudio Spectrum and + SoundBlaster SCSI) +(matcd) Matsushita/Panasonic (Creative SoundBlaster) proprietary + interface (562/563 models) +(scd) Sony proprietary interface (all models) +(acd) ATAPI IDE interface + +The following drivers were supported under the old SCSI subsystem, but are +NOT YET supported under the new CAM SCSI subsystem: + + Tekram DC390 and DC390T controllers (maybe other cards based on the + AMD 53c974 as well). + + NCR5380/NCR53400 ("ProAudio Spectrum") SCSI controller. + + UltraStor 14F, 24F and 34F SCSI controllers. + + Seagate ST01/02 SCSI controllers. + + Future Domain 8xx/950 series SCSI controllers. + + WD7000 SCSI controller. + + Adaptec 1510 series ISA SCSI controllers (not for bootable devices) + Adaptec 152x series ISA SCSI controllers + Adaptec AIC-6260 and AIC-6360 based boards, which includes the AHA-152x + and SoundBlaster SCSI cards. + + [ Note: There is work-in-progress to port the AIC-6260/6360 and + UltraStor drivers to the new CAM SCSI framework, but no estimates on + when or if they will be completed. ] + +Unmaintained drivers, they might or might not work for your hardware: + + Floppy tape interface (Colorado/Mountain/Insight) + + (mcd) Mitsumi proprietary CD-ROM interface (all models) + +2.2. Ethernet cards +------------------- + +Adaptec Duralink PCI fast ethernet adapters based on the Adaptec +AIC-6915 fast ethernet controller chip, including the following: + ANA-62011 64-bit single port 10/100baseTX adapter + ANA-62022 64-bit dual port 10/100baseTX adapter + ANA-62044 64-bit quad port 10/100baseTX adapter + ANA-69011 32-bit single port 10/100baseTX adapter + ANA-62020 64-bit single port 100baseFX adapter + +Allied-Telesis AT1700 and RE2000 cards + +Alteon Networks PCI gigabit ethernet NICs based on the Tigon 1 and Tigon 2 +chipsets, including the following: + Alteon AceNIC (Tigon 1 and 2) + 3Com 3c985-SX (Tigon 1 and 2) + Netgear GA620 (Tigon 2) + Silicon Graphics Gigabit Ethernet + DEC/Compaq EtherWORKS 1000 + NEC Gigabit Ethernet + +AMD PCnet/PCI (79c970 & 53c974 or 79c974) + +SMC Elite 16 WD8013 ethernet interface, and most other WD8003E, +WD8003EBT, WD8003W, WD8013W, WD8003S, WD8003SBT and WD8013EBT +based clones. SMC Elite Ultra. SMC Etherpower II. + +RealTek 8129/8139 fast ethernet NICs including the following: + Allied Telesyn AT2550 + Allied Telesyn AT2500TX + Genius GF100TXR (RTL8139) + NDC Communications NE100TX-E + OvisLink LEF-8129TX + OvisLink LEF-8139TX + Netronix Inc. EA-1210 NetEther 10/100 + KTX-9130TX 10/100 Fast Ethernet + Accton "Cheetah" EN1027D (MPX 5030/5038; RealTek 8139 clone?) + SMC EZ Card 10/100 PCI 1211-TX + +Lite-On 82c168/82c169 PNIC fast ethernet NICs including the following: + LinkSys EtherFast LNE100TX + NetGear FA310-TX Rev. D1 + Matrox FastNIC 10/100 + Kingston KNE110TX + +Macronix 98713, 98713A, 98715, 98715A and 98725 fast ethernet NICs + NDC Communications SFA100A (98713A) + CNet Pro120A (98713 or 98713A) + CNet Pro120B (98715) + SVEC PN102TX (98713) + +Macronix/Lite-On PNIC II LC82C115 fast ethernet NICs including the following: + LinkSys EtherFast LNE100TX Version 2 + +Winbond W89C840F fast ethernet NICs including the following: + Trendware TE100-PCIE + +VIA Technologies VT3043 "Rhine I" and VT86C100A "Rhine II" fast ethernet +NICs including the following: + Hawking Technologies PN102TX + D-Link DFE-530TX + +Silicon Integrated Systems SiS 900 and SiS 7016 PCI fast ethernet NICs + +Sundance Technologies ST201 PCI fast ethernet NICs including +the following: + D-Link DFE-550TX + +SysKonnect SK-984x PCI gigabit ethernet cards including the following: + SK-9841 1000baseLX single mode fiber, single port + SK-9842 1000baseSX multimode fiber, single port + SK-9843 1000baseLX single mode fiber, dual port + SK-9844 1000baseSX multimode fiber, dual port + +Texas Instruments ThunderLAN PCI NICs, including the following: + Compaq Netelligent 10, 10/100, 10/100 Proliant, 10/100 Dual-Port + Compaq Netelligent 10/100 TX Embedded UTP, 10 T PCI UTP/Coax, 10/100 TX UTP + Compaq NetFlex 3P, 3P Integrated, 3P w/ BNC + Olicom OC-2135/2138, OC-2325, OC-2326 10/100 TX UTP + Racore 8165 10/100baseTX + Racore 8148 10baseT/100baseTX/100baseFX multi-personality + +ADMtek Inc. AL981-based PCI fast ethernet NICs + +ASIX Electronics AX88140A PCI NICs, including the following: + Alfa Inc. GFC2204 + CNet Pro110B + +DEC EtherWORKS III NICs (DE203, DE204, and DE205) +DEC EtherWORKS II NICs (DE200, DE201, DE202, and DE422) +DEC DC21040, DC21041, or DC21140 based NICs (SMC Etherpower 8432T, DE245, etc) +DEC FDDI (DEFPA/DEFEA) NICs + +Davicom DM9100 and DM9102 PCI fast ethernet NICs, including the +following: + Jaton Corporation XpressNet + +Fujitsu MB86960A/MB86965A + +HP PC Lan+ cards (model numbers: 27247B and 27252A). + +Intel EtherExpress 16 +Intel EtherExpress Pro/10 +Intel EtherExpress Pro/100B PCI Fast Ethernet + +Isolan AT 4141-0 (16 bit) +Isolink 4110 (8 bit) + +Novell NE1000, NE2000, and NE2100 ethernet interface. + +PCI network cards emulating the NE2000: RealTek 8029, NetVin 5000, +Winbond W89C940, Surecom NE-34, VIA VT86C926. + +3Com 3C501 cards + +3Com 3C503 Etherlink II + +3Com 3c505 Etherlink/+ + +3Com 3C507 Etherlink 16/TP + +3Com 3C509, 3C579, 3C589 (PCMCIA), 3C590/592/595/900/905/905B/905C PCI +and EISA (Fast) Etherlink III / (Fast) Etherlink XL + +3Com 3c980/3c980B Fast Etherlink XL server adapter + +3Com 3cSOHO100-TX OfficeConnect adapter + +Toshiba ethernet cards + +Crystal Semiconductor CS89x0-based NICs, including: + IBM Etherjet ISA + +PCMCIA ethernet cards from IBM and National Semiconductor are also +supported. + +Note that NO token ring cards are supported at this time as we're +still waiting for someone to donate a driver for one of them. Any +takers? + +2.3 ATM +------- + + o ATM Host Interfaces + - FORE Systems, Inc. PCA-200E ATM PCI Adapters + - Efficient Networks, Inc. ENI-155p ATM PCI Adapters + + o ATM Signalling Protocols + - The ATM Forum UNI 3.1 signalling protocol + - The ATM Forum UNI 3.0 signalling protocol + - The ATM Forum ILMI address registration + - FORE Systems's proprietary SPANS signalling protocol + - Permanent Virtual Channels (PVCs) + + o IETF "Classical IP and ARP over ATM" model + - RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5" + - RFC 1577, "Classical IP and ARP over ATM" + - RFC 1626, "Default IP MTU for use over ATM AAL5" + - RFC 1755, "ATM Signaling Support for IP over ATM" + - RFC 2225, "Classical IP and ARP over ATM" + - RFC 2334, "Server Cache Synchronization Protocol (SCSP)" + - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt, + "A Distributed ATMARP Service Using SCSP" + + o ATM Sockets interface + +2.4. Misc +--------- + +AST 4 port serial card using shared IRQ. + +ARNET 8 port serial card using shared IRQ. +ARNET (now Digiboard) Sync 570/i high-speed serial. + +Boca BB1004 4-Port serial card (Modems NOT supported) +Boca IOAT66 6-Port serial card (Modems supported) +Boca BB1008 8-Port serial card (Modems NOT supported) +Boca BB2016 16-Port serial card (Modems supported) + +Comtrol Rocketport card. + +Cyclades Cyclom-y Serial Board. + +STB 4 port card using shared IRQ. + +SDL Communications Riscom/8 Serial Board. +SDL Communications RISCom/N2 and N2pci high-speed sync serial boards. + +Stallion multiport serial boards: EasyIO, EasyConnection 8/32 & 8/64, +ONboard 4/16 and Brumby. + +Specialix SI/XIO/SX ISA, EISA and PCI serial expansion cards/modules. + +Adlib, SoundBlaster, SoundBlaster Pro, ProAudioSpectrum, Gravis UltraSound +and Roland MPU-401 sound cards. (snd driver) + +Most ISA audio codecs manufactured by Crystal Semiconductors, OPTi, Creative +Labs, Avance, Yamaha and ENSONIQ. (pcm driver) + +Connectix QuickCam +Matrox Meteor Video frame grabber +Creative Labs Video Spigot frame grabber +Cortex1 frame grabber +Hauppauge Wincast/TV boards (PCI) +STB TV PCI +Intel Smart Video Recorder III +Various Frame grabbers based on Brooktree Bt848 / Bt878 chip. + +HP4020, HP6020, Philips CDD2000/CDD2660 and Plasmon CD-R drives. + +PS/2 mice + +Standard PC Joystick + +X-10 power controllers + +GPIB and Transputer drivers. + +Genius and Mustek hand scanners. + +Xilinx XC6200 based reconfigurable hardware cards compatible with +the HOT1 from Virtual Computers (www.vcc.com) + +Support for Dave Mills experimental Loran-C receiver. + +Lucent Technologies WaveLAN/IEEE 802.11 PCMCIA and ISA standard speed +(2Mbps) and turbo speed (6Mbps) wireless network adapters and workalikes +(NCR WaveLAN/IEEE 802.11, Cabletron RoamAbout 802.11 DS). Note: the +ISA versions of these adapters are actually PCMCIA cards combined with +an ISA to PCMCIA bridge card, so both kinds of devices work with +the same driver. + +FreeBSD currently does NOT support IBM's microchannel (MCA) bus. + +3. Obtaining FreeBSD +-------------------- + +You may obtain FreeBSD in a variety of ways: + +3.1. FTP/Mail +------------- + +You can ftp FreeBSD and any or all of its optional packages from +`ftp.freebsd.org' - the official FreeBSD release site. + +For other locations that mirror the FreeBSD software see the file +MIRROR.SITES. Please ftp the distribution from the site closest (in +networking terms) to you. Additional mirror sites are always welcome! +Contact freebsd-admin@FreeBSD.org for more details if you'd like to +become an official mirror site. + +If you do not have access to the Internet and electronic mail is your +only recourse, then you may still fetch the files by sending mail to +`ftpmail@ftpmail.vix.com' - putting the keyword "help" in your message +to get more information on how to fetch files using this mechanism. +Please do note, however, that this will end up sending many *tens of +megabytes* through the mail and should only be employed as an absolute +LAST resort! + + +3.2. CDROM +---------- + +FreeBSD 3.0-RELEASE and 2.2.x-RELEASE CDs may be ordered on CDROM from: + + Walnut Creek CDROM + 4041 Pike Lane, Suite D + Concord CA 94520 + 1-800-786-9907, +1-925-674-0783, +1-925-674-0821 (FAX) + +Or via the Internet from orders@cdrom.com or http://www.cdrom.com. +Their current catalog can be obtained via ftp from: + + ftp://ftp.cdrom.com/cdrom/catalog + +Cost per -RELEASE CD is $39.95 or $24.95 with a FreeBSD subscription. +FreeBSD SNAPshot CDs, when available, are $39.95 or $14.95 with a +FreeBSD-SNAP subscription (-RELEASE and -SNAP subscriptions are entirely +separate). With a subscription, you will automatically receive updates as +they are released. Your credit card will be billed when each disk is +shipped and you may cancel your subscription at any time without further +obligation. + +Shipping (per order not per disc) is $5 in the US, Canada or Mexico +and $9.00 overseas. They accept Visa, Mastercard, Discover, American +Express or checks in U.S. Dollars and ship COD within the United +States. California residents please add 8.25% sales tax. + +Should you be dissatisfied for any reason, the CD comes with an +unconditional return policy. + + +4. Upgrading from previous releases of FreeBSD +---------------------------------------------- + +If you're upgrading from a previous release of FreeBSD, most likely +it's 3.0 and some of the following issues may affect you, depending +of course on your chosen method of upgrading. There are two popular +ways of upgrading FreeBSD distributions: + + o Using sources, via /usr/src + o Using sysinstall's (binary) upgrade option. + +[insert other notes here] + + +5. Reporting problems, making suggestions, submitting code. +----------------------------------------------------------- +Your suggestions, bug reports and contributions of code are always +valued - please do not hesitate to report any problems you may find +(preferably with a fix attached, if you can!). + +The preferred method to submit bug reports from a machine with +Internet mail connectivity is to use the send-pr command or use the CGI +script at http://www.freebsd.org/send-pr.html. Bug reports +will be dutifully filed by our faithful bugfiler program and you can +be sure that we'll do our best to respond to all reported bugs as soon +as possible. Bugs filed in this way are also visible on our WEB site +in the support section and are therefore valuable both as bug reports +and as "signposts" for other users concerning potential problems to +watch out for. + +If, for some reason, you are unable to use the send-pr command to +submit a bug report, you can try to send it to: + + freebsd-bugs@FreeBSD.org + +Note that send-pr itself is a shell script that should be easy to move +even onto a totally different system. We much prefer if you could use +this interface, since it make it easier to keep track of the problem +reports. However, before submitting, please try to make sure whether +the problem might have already been fixed since. + + +Otherwise, for any questions or tech support issues, please send mail to: + + freebsd-questions@FreeBSD.org + + +Additionally, being a volunteer effort, we are always happy to have +extra hands willing to help - there are already far more desired +enhancements than we'll ever be able to manage by ourselves! To +contact us on technical matters, or with offers of help, please send +mail to: + + freebsd-hackers@FreeBSD.org + + +Please note that these mailing lists can experience *significant* +amounts of traffic and if you have slow or expensive mail access and +are only interested in keeping up with significant FreeBSD events, you +may find it preferable to subscribe instead to: + + freebsd-announce@FreeBSD.org + + +All of the mailing lists can be freely joined by anyone wishing +to do so. Send mail to MajorDomo@FreeBSD.org and include the keyword +`help' on a line by itself somewhere in the body of the message. This +will give you more information on joining the various lists, accessing +archives, etc. There are a number of mailing lists targeted at +special interest groups not mentioned here, so send mail to majordomo +and ask about them! + + +6. Acknowledgements +------------------- + +FreeBSD represents the cumulative work of many dozens, if not +hundreds, of individuals from around the world who have worked very +hard to bring you this release. For a complete list of FreeBSD +project staffers, please see: + + http://www.freebsd.org/handbook/staff.html + +or, if you've loaded the doc distribution: + + file:/usr/share/doc/handbook/staff.html + + +Special mention to: + + The donors listed at http://www.freebsd.org/handbook/donors.html + + Justin M. Seger <jseger@freebsd.org> for almost single-handedly + converting the ports collection to ELF. + + Doug Rabson <dfr@freebsd.org> and John Birrell <jb@freebsd.org> + for making FreeBSD/alpha happen and to the NetBSD project for + substantial indirect aid. + + Peter Wemm <peter@freebsd.org> for the new kernel module system + (with substantial aid from Doug Rabson). + + And to the many thousands of FreeBSD users and testers all over the + world, without whom this release simply would not have been possible. + +We sincerely hope you enjoy this release of FreeBSD! + + The FreeBSD Project |