Nuke abandoned configuration.

42 files changed, 0 insertions, 1602 deletions

diff --git a/release/picobsd/install/Makefile.mfs b/release/picobsd/install/Makefile.mfs
deleted file mode 100644
index ac567da..0000000
--- a/release/picobsd/install/Makefile.mfs
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-# $Id: Makefile,v 1.2.2.1 1999/05/09 22:04:07 abial Exp $
-#
-
-DESTDIR?=/mnt
-
-STAND_LINKS= bin sbin
-USR_LINKS= bin sbin libexec
-PL_LOCALE_LINKS= pl polish
-MY_DEVS= std tun2 cuaa0 cuaa1 cuaa2 vty10 fd0 wd0s1h pty0 wd0 wd1 wd2 wd3 da0 da1 da2 da3 da4 da5 da6 bpf4
-
-all: tree links files
-
-tree:
-	mtree -deU -f mfs.mtree -p ${DESTDIR}
-
-links: tree
-	(cd ${DESTDIR}; \
-		for i in ${STAND_LINKS}; \
-		do \
-			ln -s /stand $${i}; \
-		done; \
-		cd var/run; \
-		ln -s /dev/null log; \
-		cd ../../usr; \
-		for i in ${USR_LINKS}; \
-		do \
-			ln -s /stand $${i}; \
-		done; \
-		cd share/misc;\
-		ln -s /etc/termcap termcap; )
-
-files: tree
-	(cd ${DESTDIR}; \
-		cp /sbin/dhclient-script stand/; \
-		cp -Rp /boot . ; )
-
-
-# We don't do it under 'all' because it's needed only on non-DEVFS systems
-devnodes: tree
-	(cd ${DESTDIR}/dev; \
-	ln -s /dev/MAKEDEV; \
-	./MAKEDEV ${MY_DEVS}; \
-	rm MAKEDEV)
-
-clean:
diff --git a/release/picobsd/install/PICOBSD b/release/picobsd/install/PICOBSD
deleted file mode 100644
index 8f29c80..0000000
--- a/release/picobsd/install/PICOBSD
+++ /dev/null
@@ -1,74 +0,0 @@
-#
-#	$Id: PICOBSD,v 1.8.2.2 1999/02/15 02:49:24 des Exp $
-#
-#Line starting with #PicoBSD contains PicoBSD build parameters
-#marker                def_sz  init    MFS_inodes      floppy_inodes
-#PicoBSD       2200    init    4096            4096
-options	MD_ROOT_SIZE=2200	# same as def_sz
- 
-hints  "PICOBSD.hints"
-machine		"i386"
-#cpu		"I386_CPU"
-#cpu		"I486_CPU"
-#cpu		"I586_CPU"
-cpu		"I686_CPU"
-ident		PICOBSD
-maxusers	10
-
-options		MATH_EMULATE		#Support for x87 emulation
-options		INET			#InterNETworking
-options		FFS			#Berkeley Fast Filesystem
-# options		NFS			#Network Filesystem
-options		MD_ROOT
-options		MSDOSFS			#MSDOS Filesystem
-# options		"EXT2FS"
-options		"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]
-options		"NO_F00F_HACK"
-
-device		isa
-device		pci
-
-device		fdc
-
-# ATA and ATAPI devices
-device		ata
-device		atadisk
-
-# syscons is the default console driver, resembling an SCO console
-
-device		atkbdc	1
-device		atkbd
-device		vga
-device		sc	1
-
-device		npx
-
-device		sio
-
-#device		ppc
-#controller	ppbus
-#device		nlpt
-#device		plip
-#device		ppi
-
-# Order is important here due to intrusive probes, do *not* alphabetize
-# this list of network interfaces until the probes have been fixed.
-# Right now it appears that the ie0 must be probed before ep0. See
-# revision 1.20 of this file.
-device de
-device fxp
-
-#device ed
-#device ep
-#device ie
-
-device	loop
-device	ether
-# device	tun	2
-device	vn
-device	pty	16
-device	md
-#device	gzip		# Exec gzipped a.out's
-device	bpf	4
-options         COMPAT_OLDISA   #Use ISA shims and glue for old drivers
-
diff --git a/release/picobsd/install/PICOBSD.hints b/release/picobsd/install/PICOBSD.hints
deleted file mode 100644
index 3301f28..0000000
--- a/release/picobsd/install/PICOBSD.hints
+++ /dev/null
@@ -1,30 +0,0 @@
-# $FreeBSD$
-hint.fd.0.at="fdc0"
-hint.fd.0.drive="0"
-hint.ata.0.port="0x1F0"
-hint.ata.0.irq="14"
-hint.ata.1.at="isa"
-hint.ata.1.port="0x170"
-hint.ata.1.irq="15"
-hint.atkbd.0.at="isa"
-hint.atkbd.0.irq="1"
-hint.vga.0.at="isa"
-hint.sc.0.at="isa"
-hint.npx.0.at="isa"
-hint.npx.0.port="0x0F0"
-hint.npx.0.irq="13"
-hint.sio.0.at="isa"
-hint.sio.0.port="0x3F8"
-hint.sio.0.flags="0x10"
-hint.sio.0.irq="4"
-hint.sio.1.at="isa"
-hint.sio.1.port="0x2F8"
-hint.sio.1.irq="3"
-hint.sio.2.at="isa"
-hint.sio.2.disabled="1"
-hint.sio.2.port="0x3E8"
-hint.sio.2.irq="5"
-hint.sio.3.at="isa"
-hint.sio.3.disabled="1"
-hint.sio.3.port="0x2E8"
-hint.sio.3.irq="9"
diff --git a/release/picobsd/install/crunch1/Makefile b/release/picobsd/install/crunch1/Makefile
deleted file mode 100644
index 1fcfcac..0000000
--- a/release/picobsd/install/crunch1/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# $Id: Makefile,v 1.3 1999/01/19 23:12:50 abial Exp $
-#
-SRC?=/usr/src
-
-all: crunch
-
-crunch:
-#	@if [ ! -f /usr/src/usr.bin/passwd/.picobsd.patched ]; then \
-#		cat passwd.diff|(cd /usr/src/usr.bin/passwd; patch -p0); \
-#		touch /usr/src/usr.bin/passwd/.picobsd.patched; \
-#	fi
-	@cat crunch.conf|sed -e "s@/usr/src@${SRC}@" >crunch1.conf
-	@crunchgen ./crunch1.conf
-	@${MAKE} -f crunch1.mk -DNOPAM all \
-	    "CFLAGS=${CFLAGS} -DNOPAM -DRELEASE_CRUNCH -DNOSECURE -DNOCRYPT" #2>&1 >/dev/null
-
-clean:
-#	@if [ -f /usr/src/usr.bin/passwd/.picobsd.patched ]; then \
-#		cat passwd.diff|(cd /usr/src/usr.bin/passwd; patch -R -p0); \
-#		rm /usr/src/usr.bin/passwd/.picobsd.patched; \
-#	fi
-	rm  -f *.o *.stub *.lo *_stub.c *.mk \
-		crunch.cache \
-		crunch.mk \
-		crunch.c \
-		crunch1* \
-		crunch \
-		.tmp_* \
-		*.gz
-
-install: 
-	cp crunch1 ${MFS_MOUNTPOINT}/stand/crunch
-	chmod 555 ${MFS_MOUNTPOINT}/stand/crunch
-	for i in `crunchgen -l crunch1.conf` ; \
-	do \
-		ln ${MFS_MOUNTPOINT}/stand/crunch ${MFS_MOUNTPOINT}/stand/$${i}; \
-	done
-	rm ${MFS_MOUNTPOINT}/stand/crunch
-	# Install the MIB files
-	#cp mibs/*.txt ${MFS_MOUNTPOINT}/usr/local/share/snmp/mibs/
-
-
-.include <bsd.prog.mk>
diff --git a/release/picobsd/install/crunch1/crunch.conf b/release/picobsd/install/crunch1/crunch.conf
deleted file mode 100644
index 3a45dc1..0000000
--- a/release/picobsd/install/crunch1/crunch.conf
+++ /dev/null
@@ -1,66 +0,0 @@
-#
-# $Id: crunch.conf,v 1.5.2.2 1999/05/07 10:03:06 abial Exp $
-#
-# NOTE: the string "/usr/src" will be automatically replaced with the
-# correct value set in 'build' script - you should change it there
-
-# Default build options
-buildopts -DNOPAM -DRELEASE_CRUNCH -DNOSECURE -DNOCRYPT -DNONETGRAPH -DNOIPSEC
-
-# other sources
-srcdirs /usr/src/bin
-srcdirs /usr/src/sbin/i386
-srcdirs /usr/src/sbin
-srcdirs /usr/src/usr.bin
-srcdirs /usr/src/gnu/usr.bin
-srcdirs /usr/src/usr.sbin
-srcdirs /usr/src/libexec
-# sources for ns & vm
-srcdirs ../../tinyware
-
-
-progs sh test awk cat chflags chmod chown cp cpio date dd 
-# progs sh test awk cat chflags chmod chown cp cpio date dd dev_mkdb
-progs df dhclient disklabel echo fdisk fetch getty grep minigzip
-progs hostname ifconfig init ln login ls mkdir mknod msg
-progs more mount newfs pwd mount_std pwd_mkdb
-# progs mount mount_ext2fs mount_cd9660 mount_nfs msg newfs ns passwd pwd pwd_mkdb mount_std
-# progs reboot rm route stty sysctl syslogd tr umount 
-progs reboot rm route stty sysctl tr umount 
-# progs vm w
-
-#progs sh test echo hostname ln login getty stty
-#progs msg kget reboot
-#progs init ifconfig df sps cat
-## progs cp rm mknod chmod chown mkdir ls syslogd
-#progs cp rm mknod chmod chown mkdir ls
-#progs sysctl route pwd_mkdb dev_mkdb
-#progs mount umount
-#progs kill mount_std grep tr awk newfs fetch
-#progs pwd more
-##progs passwd date
-#progs date fdisk disklabel
-#progs mount_cd9660 mount_nfs ping traceroute 
-#progs tar gzip cpio dhclient
-
-#ln mount_cd9660 cd9660
-# ln mount_nfs nfs
-ln test [
-ln sh -sh
-ln mount_std procfs
-ln mount_std mount_procfs
-ln msg dmesg
-#ln ns netstat
-ln minigzip gunzip
-ln minigzip zcat
-ln minigzip gzip
-ln chown chgrp
-
-# libs -lncurses -lmytinfo -lipx -lz -lpcap -lalias -lwrap
-#libs -lncurses -lmytinfo -lipx -lz -lpcap 
-# libs -lmytinfo -lz -lpcap -lipx
-libs -lmytinfo -lz -lpcap -lipx
-# libs -ledit -lutil -lmd -lcrypt -lmp -lgmp -lm -lkvm
-libs -ledit -lutil -lcrypt -lm
-libs -lgnuregex -lftpio
-#libs -lradius # used by ppp
diff --git a/release/picobsd/install/floppy.tree.exclude b/release/picobsd/install/floppy.tree.exclude
deleted file mode 100644
index 5f412ef..0000000
--- a/release/picobsd/install/floppy.tree.exclude
+++ /dev/null
@@ -1 +0,0 @@
-CVS/*
diff --git a/release/picobsd/install/floppy.tree/boot.config b/release/picobsd/install/floppy.tree/boot.config
deleted file mode 100644
index e69de29..0000000
--- a/release/picobsd/install/floppy.tree/boot.config
+++ /dev/null
diff --git a/release/picobsd/install/floppy.tree/etc/disktab b/release/picobsd/install/floppy.tree/etc/disktab
deleted file mode 100644
index 7575ba6..0000000
--- a/release/picobsd/install/floppy.tree/etc/disktab
+++ /dev/null
@@ -1,87 +0,0 @@
-#
-# Floppy formats:
-#
-# To make a filesystem on a floppy:
-#	fdformat [-f <size>] fd<drive>[.<size>]
-#	disklabel -B -r -w fd<drive>[.<size>] fd<size>
-#	newfs <opts> fd<drive>[.<size>]
-#
-# with <opts>:
-#	-t 2	- two heads
-#	-u 9|15|18 - sectors per track
-#	(using the default value of 1/4096 is not much useful for floppies)
-#	-l 1	- interleave 1 (for most floppies)
-#	-i 65536 - bytes of data per i-node
-#	(the default -i value will render you with a floppy wasting way
-#	too much space in i-node areas)
-#
-
-fd360:\
-	:ty=floppy:se#512:nt#2:rm#300:ns#9:nc#40:\
-	:pa#720:oa#0:ba#4096:fa#512:\
-	:pb#720:ob#0:bb#4096:fb#512:\
-	:pc#720:oc#0:bc#4096:fc#512:
-
-fd720:\
-	:ty=floppy:se#512:nt#2:rm#300:ns#9:nc#80:\
-	:pa#1440:oa#0:ba#4096:fa#512:\
-	:pb#1440:ob#0:bb#4096:fb#512:\
-	:pc#1440:oc#0:bc#4096:fc#512:
-
-fd1200|floppy5|5in|5.25in High Density Floppy:\
-	:ty=floppy:se#512:nt#2:rm#360:ns#15:nc#80:\
-	:pa#2400:oa#0:ba#4096:fa#512:\
-	:pb#2400:ob#0:bb#4096:fb#512:\
-	:pc#2400:oc#0:bc#4096:fc#512:
-
-fd1440|floppy|floppy3|3in|3.5in High Density Floppy:\
-	:ty=floppy:se#512:nt#2:rm#300:ns#18:nc#80:\
-	:pa#2880:oa#0:ba#4096:fa#512:\
-	:pb#2880:ob#0:bb#4096:fb#512:\
-	:pc#2880:oc#0:bc#4096:fc#512:
-
-fd1024|floppy0|3.5in Special Density Floppy:\
-	:ty=floppy:se#512:nt#2:rm#300:ns#16:nc#64:\
-	:pa#2048:oa#0:ba#4096:fa#512:\
-	:pb#2048:ob#0:bb#4096:fb#512:\
-	:pc#2048:oc#0:bc#4096:fc#512:
-
-# a == root
-# b == swap
-# c == d == whole disk
-# e == /var
-# f == scratch
-# h == /usr
-
-cp3100new|Connor Peripherals 100MB IDE, with a different configuration:\
-	:dt=ST506:ty=winchester:se#512:nt#8:ns#33:nc#766: \
-	:pa#15840:oa#0:ta=4.2BSD:ba#4096:fa#512: \
-	:pb#24288:ob#15840:tb=swap: \
-	:pc#202224:oc#0: \
-	:pd#202224:od#0: \
-	:pe#15840:oe#40128:te=4.2BSD:be#4096:fe#512: \
-	:pg#15840:og#55968:tg=4.2BSD:bg#4096:fg#512: \
-	:ph#130416:oh#71808:th=4.2BSD:bh#4096:fh#512:
-
-sony650|Sony 650 MB MOD|\
-	:ty=removable:dt=SCSI:se#512:nt#1:ns#31:nc#18600:ts#1:rm#4800:\
-	:pc#576600:oc#0:\
-	:pa#576600:oa#0:ta=4.2BSD:ba#8192:fa#1024:
-
-mta3230|mo230|IBM MTA-3230 230 Meg 3.5inch Magneto-Optical:\
-	:ty=removeable:dt=SCSI:rm#3600:\
-	:se#512:nt#64:ns#32:nc#216:sc#2048:su#444384:\
-	:pa#444384:oa#0:ba#4096:fa#0:ta=4.2BSD:\
-	:pc#444384:oc#0:
-
-minimum:ty=mfs:se#512:nt#1:rm#300:\
-	:ns#2880:nc#1:\
-	:pa#2880:oa#0:ba#4096:fa#512:\
-	:pc#2880:oc#0:bc#4096:fc#512:
-
-zip100|zip 100:\
-	:ty=removable:se#512:nc#96:nt#64:ns#32:\
-	:pa#196608:oa#0:ba#4096:fa#512:\
-	:pb#196608:ob#0:bb#4096:fb#512:\
-	:pc#196608:oc#0:bc#4096:fc#512:
-
diff --git a/release/picobsd/install/floppy.tree/etc/doinstall b/release/picobsd/install/floppy.tree/etc/doinstall
deleted file mode 100755
index 1e29e19..0000000
--- a/release/picobsd/install/floppy.tree/etc/doinstall
+++ /dev/null
@@ -1,112 +0,0 @@
-#!/bin/sh
-#
-# PicoBSD installer script for FreeBSD
-#
-# Doug White
-# $FreeBSD$
-
-#### CONFIGURATION
-
-# URL to image tarball, fed to fetch(1)
-image_url="ftp://YOUR.SERVER.HERE/pub/fbsdimage.tgz"
-
-# Target disk driver to fdisk -e
-target_disk="wd0"
-
-#### END CONFIGURATION
-
-# Immediately abort on error
-set -e
-
-# Do the install
-
-echo "==> Partitioning disk"
-fdisk -e ${target_disk}
-
-echo "==> Disklabeling disk"
-/etc/prepdisk ${target_disk}
-
-echo "==> Creating filesystem"
-newfs /dev/r${target_disk}s1a > /dev/null
-
-echo "==> Mounting new filesystem"
-mount /dev/${target_disk}s1a /mnt
-
-echo "==> Installing disk image"
-if [ "X${image_url}" = "X" ] ; then
-   echo "No URL specified!"
-else
-   echo "=====> From:  ${image_url}"
-   cd /mnt
-   fetch -a -o - ${image_url} | gzip -d | cpio -idmu --quiet
-fi
-
-# Some examples of post-install tweaking
-
-# The install floppy always DHCPs an address.  If you want to make that
-# address permanent on the system, use this code bit.
-
-#echo "==> Saving IP address"
-#set `ifconfig fxp0 | grep inet`
-#echo "ifconfig_fxp0=\"inet $2 netmask $4\"" >> /mnt/etc/rc.conf
-#echo "=====> IP Address is $2"
-
-# If you enable different apps based on environment, here's an example.
-# For 10.2.X.X networks, enable AMD.
-
-#echo "==> Checking if amd should be enabled"
-#IFS=.
-#set $2
-#if [ "X$1" = "X10" -a "X$2" = "X1" ] ; then
-#   echo "=====> Enabling amd"
-#   echo "amd_enable=\"YES\"" >> /mnt/etc/rc.conf
-#fi 
-
-#echo "==> Setting default router"
-#echo "defaultrouter=\"10.1.1.3\"" >> /mnt/etc/rc.conf
-
-# Grab the DNS servers from the local DHCP configuration.
-
-#echo "==> Configuring name resolution"
-#cp /etc/resolv.conf /mnt/etc
-
-# Prompt a menu to install a single or multiprocessor kernel.  On our
-# main image, we have two kernels, kernel-SMP and kernel-NOSMP.  This
-# menu drops a symlink that the bootblocks follow to the proper kernel.
-# The user can enter a name for a different kernel if desired.
-
-#echo "==> Linking kernel"
-
-#DOKERN=0
-#cd /mnt
-#chflags noschg kernel
-#rm -f kernel
-#
-#while [ "X$DOKERN" = "X0" ] ; do
-#
-#   DOKERN=1
-#
-#   echo "    Please specify which kernel to use:"
-#   echo "       1.  Uniprocessor"
-#   echo "       2.  Multiprocessor (OK for SMP equipped systems with one CPU)"
-#   echo "       Or type the name of the kernel you wish to use"
-#   read -p "Select >" KERN
-#
-#
-#   if [ "X$KERN" = "X1"  ] ; then
-#      ln -s kernel-NOSMP kernel
-#      echo "=====> Uniprocessor kernel selected"
-#   elif [ "X$KERN" = "X2" ] ; then
-#      ln -s kernel-SMP kernel
-#      echo "=====> SMP kernel selected"
-#   elif [ -f $KERN ] ; then
-#      ln -s $KERN kernel
-#      echo "=====> User supplied kernel $KERN selected"
-#   else
-#      echo "*** Unknown kernel $KERN" 
-#      KERN=0
-#   fi
-#
-#done
-
-echo "==> Install complete!"
diff --git a/release/picobsd/install/floppy.tree/etc/fstab b/release/picobsd/install/floppy.tree/etc/fstab
deleted file mode 100644
index b4a988f..0000000
--- a/release/picobsd/install/floppy.tree/etc/fstab
+++ /dev/null
@@ -1,5 +0,0 @@
-# $FreeBSD$
-#proc				/proc			procfs	rw 0 0
-#/dev/fd0c			/start_floppy		ufs	rw 1 1
-#/dev/wd0s1			/dos			msdosfs	rw 0 0
-#/dev/wcd0c			/cdrom			cd9660	ro,noauto 0 0
diff --git a/release/picobsd/install/floppy.tree/etc/gettytab b/release/picobsd/install/floppy.tree/etc/gettytab
deleted file mode 100644
index 90562ac..0000000
--- a/release/picobsd/install/floppy.tree/etc/gettytab
+++ /dev/null
@@ -1,40 +0,0 @@
-#	from: @(#)gettytab	5.14 (Berkeley) 3/27/91
-#
-default:\
-	:cb:ce:ck:lc:fd#1000:cl:im=\r\nPicoBSD (%h) (%t)\r\n\r\n:sp#1200:
-
-P|Pc|Pc console:\
-	:ht:np:sp#115200:
-
-#
-# Fixed speed entries
-2|std.9600|9600-baud:\
-	:np:sp#9600:
-g|std.19200|19200-baud:\
-	:np:sp#19200:
-std.38400|38400-baud:\
-	:np:sp#38400:
-std.57600|57600-baud:\
-	:np:sp#57600:
-std.115200|115200-baud:\
-	:np:sp#115200:
-
-#
-# Entry specifying explicit device settings.  See termios(4) and
-# /usr/include/termios.h, too.  The entry forces the tty into
-# CLOCAL mode (so no DCD is required), and uses Xon/Xoff flow control.
-#
-# cflags: CLOCAL | HUPCL | CREAD | CS8
-# oflags: OPOST | ONLCR | OXTABS
-# iflags: IXOFF | IXON | ICRNL | IGNPAR
-# lflags: IEXTEN | ICANON | ISIG | ECHOCTL | ECHO | ECHOK | ECHOE | ECHOKE
-#
-# The `0' flags don't have input enabled.  The `1' flags don't echo.
-# (Echoing is done inside getty itself.)
-#
-local.9600|CLOCAL tty @ 9600 Bd:\
-	:c0#0x0000c300:c1#0x0000cb00:c2#0x0000cb00:\
-	:o0#0x00000007:o1#0x00000002:o2#0x00000007:\
-	:i0#0x00000704:i1#0x00000000:i2#0x00000704:\
-	:l0#0x000005cf:l1#0x00000000:l2#0x000005cf:\
-	:sp#9600:
diff --git a/release/picobsd/install/floppy.tree/etc/group b/release/picobsd/install/floppy.tree/etc/group
deleted file mode 100644
index abbd733..0000000
--- a/release/picobsd/install/floppy.tree/etc/group
+++ /dev/null
@@ -1,19 +0,0 @@
-wheel:*:0:root,user
-daemon:*:1:daemon
-kmem:*:2:root
-sys:*:3:root
-tty:*:4:root
-operator:*:5:root
-mail:*:6:
-bin:*:7:
-news:*:8:
-man:*:9:
-games:*:13:
-staff:*:20:root,user
-guest:*:31:root
-uucp:*:66:
-xten:*:67:xten
-dialer:*:68:
-network:*:69:
-nogroup:*:65533:
-nobody:*:65534:
diff --git a/release/picobsd/install/floppy.tree/etc/host.conf b/release/picobsd/install/floppy.tree/etc/host.conf
deleted file mode 100644
index c67b871..0000000
--- a/release/picobsd/install/floppy.tree/etc/host.conf
+++ /dev/null
@@ -1,3 +0,0 @@
-# $Id: host.conf,v 1.1.1.1 1998/08/27 17:38:42 abial Exp $
-hosts
-bind
diff --git a/release/picobsd/install/floppy.tree/etc/inetd.conf b/release/picobsd/install/floppy.tree/etc/inetd.conf
deleted file mode 100644
index c7c50de..0000000
--- a/release/picobsd/install/floppy.tree/etc/inetd.conf
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Internet server configuration database
-#
-#	@(#)inetd.conf	5.4 (Berkeley) 6/30/90
-#
-telnet	stream	tcp	nowait	root	/usr/libexec/telnetd	telnetd
-#
-# "Small servers" -- used to be standard on, but we're more conservative
-# about things due to Internet security concerns.  Only turn on what you
-# need.
-#
-#daytime stream	tcp	nowait	root	internal
-#daytime dgram	udp	wait	root	internal
-#time	stream	tcp	nowait	root	internal
-#time	 dgram	udp	wait	root	internal
-#echo	stream	tcp	nowait	root	internal
-#echo	dgram	udp	wait	root	internal
-#discard stream	tcp	nowait	root	internal
-#discard dgram	udp	wait	root	internal
-#chargen stream	tcp	nowait	root	internal
-#chargen dgram	udp	wait	root	internal
diff --git a/release/picobsd/install/floppy.tree/etc/login.conf b/release/picobsd/install/floppy.tree/etc/login.conf
deleted file mode 100644
index 17bfb13..0000000
--- a/release/picobsd/install/floppy.tree/etc/login.conf
+++ /dev/null
@@ -1,120 +0,0 @@
-# This file controls resource limits, accounting limits and
-# default user environment settings.
-#
-#	$Id: login.conf,v 1.2.2.1 1999/04/30 18:48:09 hoek Exp $
-#
-
-
-# Authentication methods
-
-auth-defaults:\
-	:auth=passwd:
-
-auth-root-defaults:\
-	:auth-login=passwd:\
-	:auth-rlogin=passwd:\
-
-auth-ftp-defaults:\
-	:auth=passwd:
-
-# Example defaults
-# These settings are used by login(1) by default for classless users
-# Note that entries like "cputime" set both "cputime-cur" and "cputime-max"
-
-default:\
-	:cputime=infinity:\
-	:datasize-cur=22M:\
-	:stacksize-cur=8M:\
-	:memorylocked-cur=10M:\
-	:memoryuse-cur=30M:\
-	:filesize=infinity:\
-	:coredumpsize=infinity:\
-	:maxproc-cur=64:\
-	:openfiles-cur=64:\
-	:priority=0:\
-	:requirehome@:\
-	:umask=022:\
-	:tc=auth-defaults:
-
-
-#
-# standard - standard user defaults
-#
-standard:\
-	:copyright=/etc/COPYRIGHT:\
-	:welcome=/etc/motd:\
-	:setenv=MAIL=/var/mail/$,BLOCKSIZE=K,EDITOR=/usr/bin/ee:\
-	:path=~/bin /bin /usr/bin:\
-	:nologin=/var/run/nologin:\
-	:cputime=1h30m:\
-	:datasize=8M:\
-	:stacksize=2M:\
-	:memorylocked=4M:\
-	:memoryuse=8M:\
-	:filesize=8M:\
-	:coredumpsize=8M:\
-	:openfiles=24:\
-	:maxproc=32:\
-	:priority=0:\
-	:requirehome:\
-	:passwordtime=90d:\
-	:umask=002:\
-	:ignoretime@:\
-	:tc=default:
-#
-# Staff users - few restrictions and allow login anytime
-#
-staff:\
-	:ignorenologin:\
-	:ignoretime:\
-	:requirehome@:\
-	:accounted@:\
-	:path=~/bin /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin:\
-	:umask=022:\
-	:tc=standard:
-
-
-#
-# root - fallback for root logins
-#
-root:\
-	:path=~/bin /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin:\
-	:cputime=infinity:\
-	:datasize=infinity:\
-	:stacksize=infinity:\
-	:memorylocked=infinity:\
-	:memoryuse=infinity:\
-	:filesize=infinity:\
-	:coredumpsize=infinity:\
-	:openfiles=infinity:\
-	:maxproc=infinity:\
-	:memoryuse-cur=32M:\
-	:maxproc-cur=64:\
-	:openfiles-cur=1024:\
-	:priority=0:\
-	:requirehome@:\
-	:umask=022:\
-	:tc=auth-root-defaults:\
-#
-# Settings used by /etc/rc
-#
-daemon:\
-	:coredumpsize@:\
-	:coredumpsize-cur=0:\
-	:datasize=infinity:\
-	:datasize-cur@:\
-	:maxproc=512:\
-	:maxproc-cur@:\
-	:memoryuse-cur=64M:\
-	:memorylocked-cur=64M:\
-	:openfiles=1024:\
-	:openfiles-cur@:\
-	:stacksize=16M:\
-	:stacksize-cur@:\
-	:tc=default:
-#
-# Polish Users Accounts. Setup proper environment variables.
-#
-polish:Polish Users Accounts:\
-	:lang=pl_pl.ISO-8859-2:\
-	:tc=default:
diff --git a/release/picobsd/install/floppy.tree/etc/master.passwd b/release/picobsd/install/floppy.tree/etc/master.passwd
deleted file mode 100644
index 9d85cdf..0000000
--- a/release/picobsd/install/floppy.tree/etc/master.passwd
+++ /dev/null
@@ -1,7 +0,0 @@
-root:$1$xOOaGnKU$U9QdsCI40XXcCUMBN.7Az.:0:0::0:0:Charlie &:/root:/bin/sh
-toor:*:0:0::0:0:Bourne-again Superuser:/root:
-daemon:*:1:1::0:0:Owner of many system processes:/root:/nonexistent
-operator:*:2:20::0:0:System &:/usr/guest/operator:/bin/csh
-bin:*:3:7::0:0:Binaries Commands and Source,,,:/:/nonexistent
-nobody:*:65534:65534::0:0:Unprivileged user:/nonexistent:/nonexistent
-user:$1$T9q8Coad$WatJttamwr2UAdbfKbWxj.:1002:1002:polish:0:0:user:/home/user:/bin/sh
diff --git a/release/picobsd/install/floppy.tree/etc/mfs.rc b/release/picobsd/install/floppy.tree/etc/mfs.rc
deleted file mode 100644
index 22b7678..0000000
--- a/release/picobsd/install/floppy.tree/etc/mfs.rc
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/sh
-# $Id: mfs.rc.en,v 1.1.1.1 1998/08/27 17:38:42 abial Exp $
-### WARNING !!!!!! #####
-# We remove this file during execution (see EOF).
-# Awful things happen if its size is > 1024B
-
-stty status '^T'
-
-trap : 2
-trap : 3
-
-HOME=/; export HOME
-PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin
-export PATH
-
-trap "echo 'Reboot interrupted'; exit 1" 3
-
-### Special setup for one floppy PICOBSD ###
-echo ""
-echo "-------------------------------------------"
-echo "  Please wait. The system is coming up..."
-echo "-------------------------------------------"
-echo ""
-echo "Reading /etc from startup floppy..."
-mount -o rdonly /dev/fd0a /start_floppy
-cd /start_floppy/etc
-cp -Rp . /etc/
-cd /etc
-pwd_mkdb -p ./master.passwd
-umount /start_floppy
-echo "Ok. (Now you can remove floppy if you like)"
-echo ""
-. rc
-exit 0
diff --git a/release/picobsd/install/floppy.tree/etc/prepdisk b/release/picobsd/install/floppy.tree/etc/prepdisk
deleted file mode 100755
index ddba5c7..0000000
--- a/release/picobsd/install/floppy.tree/etc/prepdisk
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/sh
-#
-# Prepares disk based on kernel disk information.  Assumes fdisk -e was
-# run beforehand.
-#
-# 'swap' is the size of the swap partition in 512 byte blocks (def: 256MB)
-
-# dev=target_disk
-
-target_disk=$1
-
-dmesg | grep "${target_disk}.*sectors" | tr -d '(:)' | awk '
-	{
-	v = $3
-	c = $5
-	h = $7
-	s = $9
-	ss = c * h * s - s
-	sw = 522240
-	ap = ss - sw
-
-	print "#",$0 > "_"
-	print "g c"c" h"h" s"s > "_"
-	print "p 1 165",s,ss > "_"
-	print "a 1" > "_"
-
-	print "#",$0  > "__"
-	print "type: ESDI" > "__"
-	print "disk:", $1 > "__"
-	print "label:" > "__"
-	print "flags:" > "__"
-	print "bytes/sector: 512" > "__"
-	print "sectors/track:", s > "__"
-	print "tracks/cylinder:", h > "__"
-	print "sectors/cylinder:", s * h > "__"
-	print "cylinders:", c > "__"
-	print "sectors/unit:", ss > "__"
-	print "rpm: 3600" > "__"
-	print "interleave: 1" > "__"
-	print "trackskew: 0" > "__"
-	print "cylinderskew: 0" > "__"
-	print "headswitch: 0           # milliseconds" > "__"
-	print "track-to-track seek: 0  # milliseconds" > "__"
-	print "drivedata: 0 " > "__"
-	print "8 partitions:" > "__"
-	print "#        size   offset    fstype   [fsize bsize bps/cpg]" > "__"
-	print "a:",ap,"0 4.2BSD 512 4096 " > "__"
-	print "b:",sw,ap,"swap " > "__"
-	print "c:",ss,"0 unused 0 0" > "__"
-	}
-' 
-disklabel -BrR ${target_disk} __
diff --git a/release/picobsd/install/floppy.tree/etc/profile b/release/picobsd/install/floppy.tree/etc/profile
deleted file mode 100644
index babb9333..0000000
--- a/release/picobsd/install/floppy.tree/etc/profile
+++ /dev/null
@@ -1,3 +0,0 @@
-# System-wide .profile file for sh(1).
-BLOCKSIZE=K; export BLOCKSIZE
-PATH=/stand:.; export PATH
diff --git a/release/picobsd/install/floppy.tree/etc/protocols b/release/picobsd/install/floppy.tree/etc/protocols
deleted file mode 100644
index c80be39..0000000
--- a/release/picobsd/install/floppy.tree/etc/protocols
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Internet (IP) protocols
-ip	0	IP		# internet protocol, pseudo protocol number
-icmp	1	ICMP		# internet control message protocol
-igmp	2	IGMP		# Internet Group Management
-tcp	6	TCP		# transmission control protocol
-udp	17	UDP		# user datagram protocol
diff --git a/release/picobsd/install/floppy.tree/etc/rc b/release/picobsd/install/floppy.tree/etc/rc
deleted file mode 100644
index 09612a08..0000000
--- a/release/picobsd/install/floppy.tree/etc/rc
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/bin/sh
-# $Id: rc.en,v 1.5 1999/01/19 23:15:41 abial Exp $
-############################################
-### Special setup for one floppy PICOBSD ###
-### THIS IS NOT THE NORMAL /etc/rc !!!!! ###
-############################################
-mount -a -t nonfs
-if [ -f /etc/rc.conf ]; then
-    . /etc/rc.conf
-fi
-rm -f /var/run/*
-if [ "x$swapfile" != "xNO" -a -w "$swapfile" -a -b /dev/vn0b ]; then
-	echo "Adding $swapfile as additional swap."
-	vnconfig /dev/vn0b $swapfile && swapon /dev/vn0b
-fi
-# configure serial devices
-if [ -f /etc/rc.serial ]; then
-	. /etc/rc.serial
-fi
-# start up the initial network configuration.
-if [ -f /etc/rc.network ]; then
-	. /etc/rc.network
-	network_pass1
-fi
-mount -a -t nfs
-chmod 666 /dev/tty[pqrsPQRS]*
-# clean up left-over files
-(cd /var/run && { cp /dev/null utmp; chmod 644 utmp; })
-if [ -n "$network_pass1_done" ]; then
-    network_pass2
-fi
-if [ -n "$network_pass2_done" ]; then
-    network_pass3
-fi
-if [ "X${inetd_enable}" = X"YES" ]; then
-	echo "Starting inetd."; inetd ${inetd_flags}
-fi
-
-dev_mkdb
-
-echo ''
-if [ "x$swapfile" = "xNO" ]; then
-	echo "WARNING: no swap partition!"
-	echo "Don't run too many programs at the same time..."
-fi
-
-# Launch the installer
-. /etc/doinstall
-
-echo ''
-echo ''
-echo '+----------- PicoBSD @VER@ (NET) ---------------+'
-echo '|                                              |'
-echo '| Log in as "root" (password "setup").         |'
-echo '|                                              |'
-echo '| This version of PicoBSD is fully under       |'
-echo '| BSD license. For more details see            |'
-echo '| http://www.freebsd.org/~picobsd, or contact  |'
-echo '| the author.                                  |'
-echo '|                                              |'
-echo '|                     abial@freebsd.org        |'
-echo '|                                              |'
-echo '+----------------------------------------------+'
-exit 0
diff --git a/release/picobsd/install/floppy.tree/etc/rc.conf b/release/picobsd/install/floppy.tree/etc/rc.conf
deleted file mode 100644
index 7ec2d5c..0000000
--- a/release/picobsd/install/floppy.tree/etc/rc.conf
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/bin/sh
-# $Id: rc.conf.en,v 1.1.1.1 1998/08/27 17:38:42 abial Exp $
-swapfile="NO"		# Set to name of swapfile if aux swapfile desired.
-###  Network configuration sub-section  ######################
-### Basic network options: ###
-hostname="pico.mydomain.edu"	# Set this!
-firewall="NO"			# firewall type (see /etc/rc.firewall) or NO
-tcp_extensions="NO"		# Allow RFC1323 & RFC1644 extensions (or NO).
-network_interfaces="lo0 fxp0"	# List of network interfaces (lo0 is loopback).
-ifconfig_lo0="inet 127.0.0.1"	# default loopback device configuration.
-ifconfig_fxp0=""                # Force call to start_if.fxp0
-#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
-### Network daemons options: ###
-inetd_enable="NO"		# Run the network daemon dispatcher (or NO)
-inetd_flags=""			# Optional flags to inetd
-snmpd_enable="NO"		# Run the SNMP daemon (or NO)
-snmpd_flags="-C -c /etc/snmpd.conf"	# Optional flags to snmpd
-### Network routing options: ###
-defaultrouter="NO"		# Set to default gateway (or NO).
-static_routes=""		# Set to static route list (or leave empty).
-gateway_enable="NO"		# Set to YES if this host will be a gateway.
-arpproxy_all=""			# replaces obsolete kernel option ARP_PROXYALL.
-### Allow local configuration override at the very end here ##
-if [ -f /etc/rc.conf.local ]; then
-	. /etc/rc.conf.local
-fi
diff --git a/release/picobsd/install/floppy.tree/etc/rc.network b/release/picobsd/install/floppy.tree/etc/rc.network
deleted file mode 100644
index 5c58b4c..0000000
--- a/release/picobsd/install/floppy.tree/etc/rc.network
+++ /dev/null
@@ -1,79 +0,0 @@
-#!/bin/sh -
-# $Id: rc.network.en,v 1.1.1.1 1998/08/27 17:38:42 abial Exp $
-network_pass1() {
-    echo -n 'Doing initial network setup:'
-    # Set the host name if it is not already set
-    if [ -z "`hostname -s`" ] ; then
-	    hostname $hostname
-	    echo ' hostname'
-    fi
-    # Set up all the network interfaces, calling startup scripts if needed
-    for ifn in ${network_interfaces}; do
-	    if [ -e /etc/start_if.${ifn} ]; then
-		    . /etc/start_if.${ifn}
-	    fi
-	    # Do the primary ifconfig if specified
-	    eval ifconfig_args=\$ifconfig_${ifn}
-	    if [ -n "${ifconfig_args}" ] ; then
-		    ifconfig ${ifn} ${ifconfig_args}
-	    fi
-	    # Check to see if aliases need to be added
-	    alias=0
-	    while :
-	    do
-		    eval ifconfig_args=\$ifconfig_${ifn}_alias${alias}
-		    if [ -n "${ifconfig_args}" ]; then
-			    ifconfig ${ifn} ${ifconfig_args} alias
-			    alias=`expr ${alias} + 1`
-		    else
-			    break;
-		    fi
-	    done
-	    ifconfig ${ifn}
-    done
-    # Load the filters if required
-    if [ -n "$firewall_enable" -a -f /etc/rc.firewall -a \
-    	"x$firewall_enable" = "xYES" ] ; then
-    		. /etc/rc.firewall
-    		echo "Firewall rules loaded."
-    else
-	    echo "Warning: kernel has firewall functionality, but firewall rules weren't loaded."
-	    echo "         All ip services are ENABLED by default."
-    fi
-    # Configure routing
-    if [ "x$defaultrouter" != "xNO" ] ; then
-	    static_routes="default ${static_routes}"
-	    route_default="default ${defaultrouter}"
-    fi
-    # Set up any static routes.  This should be done before router discovery.
-    if [ "x${static_routes}" != "x" ]; then
-	    for i in ${static_routes}; do
-		    eval route_args=\$route_${i}
-		    route add ${route_args}
-	    done
-    fi
-    echo -n 'Additional routing options:'
-    if [ -n "$tcp_extensions" -a "x$tcp_extensions" != "xYES" ] ; then
-	    echo -n ' tcp_extensions=NO'
-	    sysctl -w net.inet.tcp.rfc1323=0 >/dev/null 2>&1
-	    sysctl -w net.inet.tcp.rfc1644=0 >/dev/null 2>&1
-    fi
-    if [ "X$gateway_enable" = X"YES" ]; then
-	    echo -n ' IP_gateway=YES'
-	    sysctl -w net.inet.ip.forwarding=1 >/dev/null 2>&1
-    fi
-    if [ "X$arpproxy_all" = X"YES" ]; then
-	    echo -n ' turning on ARP_PROXY_ALL: '
-	    sysctl -w net.link.ether.inet.proxyall=1 2>&1
-    fi
-    echo '.'
-    network_pass1_done=YES	# Let future generations know we made it.
-}
-
-network_pass2() {
-    network_pass2_done=YES
-}
-
-network_pass3() {
-    network_pass3_done=YES
-}
diff --git a/release/picobsd/install/floppy.tree/etc/rc.serial b/release/picobsd/install/floppy.tree/etc/rc.serial
deleted file mode 100644
index 9eb1c8d..0000000
--- a/release/picobsd/install/floppy.tree/etc/rc.serial
+++ /dev/null
@@ -1,127 +0,0 @@
-#!/bin/sh
-# $Id: rc.serial,v 1.1.1.1 1998/08/27 17:38:42 abial Exp $
-
-# Change some defaults for serial devices.
-# Standard defaults are:
-#	dtrwait 300 drainwait 0
-#	initial cflag from <sys/ttydefaults.h> = cread cs8 hupcl
-#	initial iflag, lflag and oflag all 0
-#	speed 9600
-#	special chars from <sys/ttydefaults.h>
-#	nothing locked
-# except for serial consoles the initial iflag, lflag and oflag are from
-# <sys/ttydefaults.h> and clocal is locked on.
-
-default() {
-	# Reset everything changed by the other functions to initial defaults.
-
-	ci=$1; shift	# call in device identifier
-	co=$1; shift	# call out device identifier
-
-	for i in $*
-	do
-		comcontrol /dev/tty$ci$i dtrwait 300 drainwait 0
-		stty </dev/ttyi$ci$i -clocal  crtscts  hupcl 9600 reprint ^R
-		stty </dev/ttyl$ci$i -clocal -crtscts -hupcl 0
-		stty </dev/cuai$co$i -clocal  crtscts  hupcl 9600 reprint ^R
-		stty </dev/cual$co$i -clocal -crtscts -hupcl 0
-	done
-}
-
-maybe() {
-	# Special settings.
-
-	ci=$1; shift
-	co=$1; shift
-
-	for i in $*
-	do
-		# Don't use ^R; it breaks bash's ^R when typed ahead.
-		stty </dev/ttyi$ci$i reprint undef
-		stty </dev/cuai$co$i reprint undef
-		# Lock clocal off on dialin device for security.
-		stty </dev/ttyl$ci$i clocal
-		# Lock the speeds to use old binaries that don't support them.
-		# Any legal speed works to lock the initial speed.
-		stty </dev/ttyl$ci$i 300
-		stty </dev/cual$co$i 300
-	done
-}
-
-modem() {
-	# Modem that supports CTS and perhaps RTS handshaking.
-
-	ci=$1; shift
-	co=$1; shift
-
-	for i in $*
-	do
-		# may depend on modem
-		comcontrol /dev/tty$ci$i dtrwait 100 drainwait 180
-		# Lock crtscts on.
-		# Speed reasonable for V42bis.
-		stty </dev/ttyi$ci$i crtscts 57600
-		stty </dev/ttyl$ci$i crtscts
-		stty </dev/cuai$co$i crtscts 57600
-		stty </dev/cual$co$i crtscts
-	done
-}
-
-mouse() {
-	# Mouse on either callin or callout port.
-
-	ci=$1; shift
-	co=$1; shift
-
-	for i in $*
-	do
-		# Lock clocal on, hupcl off.
-		# Standard speed for Microsoft mouse.
-		stty </dev/ttyi$ci$i clocal -hupcl 1200
-		stty </dev/ttyl$ci$i clocal  hupcl
-		stty </dev/cuai$co$i clocal -hupcl 1200
-		stty </dev/cual$co$i clocal  hupcl
-	done
-}
-
-terminal() {
-	# Terminal that supports CTS and perhaps RTS handshaking
-	# with the cable or terminal arranged so that DCD is on
-	# at least while the terminal is on.
-	# Also works for bidirectional communications to another pc
-	# provided at most one side runs getty.
-	# Same as modem() except we want a faster speed and no dtrwait.
-
-	ci=$1; shift
-	co=$1; shift
-
-	modem $ci $co $*
-	for i in $*
-	do
-		comcontrol /dev/tty$ci$i dtrwait 0
-		stty </dev/ttyi$ci$i 115200
-		stty </dev/cuai$co$i 115200
-	done
-}
-
-# Don't use anything from this file unless you have some buggy programs
-# that require it.
-
-# Edit the functions and the examples to suit your system.
-# $1 is the call in device identifier, $2 is the call out device identifier
-# and the remainder of the line lists the device numbers.
-
-# Initialize assorted 8250-16550 (sio) ports.
-# maybe    d a  0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p q r s t u v
-# mouse    d a      2
-# modem    d a    1
-# terminal d a  0
-
-# Initialize all ports on a Cyclades-8yo.
-# modem    c c  00 01 02 03 04 05 06 07
-
-# Initialize all ports on a Cyclades-16ye.
-# modem    c c  00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 
-
-# Initialize all ports on a Digiboard 8.
-# modem    D D  00 01 02 03 04 05 06 07
diff --git a/release/picobsd/install/floppy.tree/etc/remote b/release/picobsd/install/floppy.tree/etc/remote
deleted file mode 100644
index 6f9fcaf..0000000
--- a/release/picobsd/install/floppy.tree/etc/remote
+++ /dev/null
@@ -1,50 +0,0 @@
-#	@(#)remote	5.2 (Berkeley) 6/30/90
-#
-# remote -- remote host description file
-# see tip(1), remote(5)
-#
-# dv	device to use for the tty
-# el	EOL marks (default is NULL)
-# du	make a call flag (dial up)
-# pn	phone numbers (@ =>'s search phones file; possibly taken from
-#	PHONES environment variable)
-# at	ACU type
-# ie	input EOF marks (default is NULL)
-# oe	output EOF string (default is NULL)
-# cu	call unit (default is dv)
-# br	baud rate (defaults to 300)
-# fs	frame size (default is BUFSIZ) -- used in buffering writes on
-#	receive operations
-# tc	to continue a capability
-
-# Systems definitions
-netcom|Netcom Unix Access:\
-	:pn=\@:tc=unix1200:
-omen|Omen BBS:\
-	:pn=\@:tc=dos1200:
-
-# UNIX system definitions
-unix1200|1200 Baud dial-out to a UNIX system:\
-	:el=^U^C^R^O^D^S^Q:ie=%$:oe=^D:tc=dial1200:
-unix300|300 Baud dial-out to a UNIX system:\
-	:el=^U^C^R^O^D^S^Q:ie=%$:oe=^D:tc=dial300:
-
-# DOS system definitions
-dos1200|1200 Baud dial-out to a DOS system:\
-	:el=^U^C^R^O^D^S^Q:ie=%$:oe=^Z:pa=none:tc=dial1200:
-
-# General dialer definitions used below
-#
-# COURIER switch settings:
-# switch:	1 2 3 4 5 6 7 8 9 10
-# setting:	D U D U D D U D U U
-# Rackmount:	U U D U D U D D U D
-#
-dial2400|2400 Baud Hayes attributes:\
-	:dv=/dev/cuaa0:br#2400:cu=/dev/cuaa0:at=hayes:du:
-dial1200|1200 Baud Hayes attributes:\
-	:dv=/dev/cuaa0:br#1200:cu=/dev/cuaa0:at=hayes:du:
-
-# Hardwired line
-cuaa0b|cua0b:dv=/dev/cuaa0:br#2400
-cuaa0c|cua0c:dv=/dev/cuaa0:br#9600
diff --git a/release/picobsd/install/floppy.tree/etc/resolv.conf b/release/picobsd/install/floppy.tree/etc/resolv.conf
deleted file mode 100644
index 57a54e3..0000000
--- a/release/picobsd/install/floppy.tree/etc/resolv.conf
+++ /dev/null
@@ -1,3 +0,0 @@
-# $Id: resolv.conf.en,v 1.1.1.1 1998/08/27 17:38:42 abial Exp $
-domain		mydomain.edu
-nameserver	192.33.4.12
diff --git a/release/picobsd/install/floppy.tree/etc/services b/release/picobsd/install/floppy.tree/etc/services
deleted file mode 100644
index eec499f..0000000
--- a/release/picobsd/install/floppy.tree/etc/services
+++ /dev/null
@@ -1,94 +0,0 @@
-echo	4/ddp
-echo	7/tcp
-echo	7/udp
-discard	9/tcp
-discard	9/udp
-systat	11/tcp
-systat	11/udp
-daytime	13/tcp
-daytime	13/udp
-qotd	17/tcp
-qotd	17/udp
-chargen	19/tcp
-chargen	19/udp
-ftp-data	20/tcp
-ftp-data	20/udp
-ftp	21/tcp
-ftp	21/udp
-ssh	22/tcp
-ssh	22/udp
-telnet	23/tcp
-telnet	23/udp
-smtp	25/tcp
-smtp	25/udp
-time	37/tcp
-time	37/udp
-domain	53/tcp
-domain	53/udp
-tacacs-ds	65/tcp
-tacacs-ds	65/udp
-bootps	67/tcp
-bootps	67/udp
-bootpc	68/tcp
-bootpc	68/udp
-tftp	69/tcp
-tftp	69/udp
-gopher	70/tcp
-gopher	70/udp
-finger	79/tcp
-finger	79/udp
-http	80/tcp
-http	80/udp
-pop2	109/tcp
-pop2	109/udp
-pop3	110/tcp
-pop3	110/udp
-uucp-path	117/tcp
-uucp-path	117/udp
-nntp	119/tcp
-nntp	119/udp
-netbios-ns	137/tcp
-netbios-ns	137/udp
-netbios-dgm	138/tcp
-netbios-dgm	138/udp
-netbios-ssn	139/tcp
-netbios-ssn	139/udp
-imap	143/tcp
-imap	143/udp
-snmp	161/tcp
-snmp	161/udp
-snmptrap	162/tcp
-snmptrap	162/udp
-bgp	179/tcp
-bgp	179/udp
-irc	194/tcp
-irc	194/udp
-ipx	213/tcp
-ipx	213/udp
-imap3	220/tcp
-imap3	220/udp
-ldap	389/tcp
-ldap	389/udp
-netware-ip	396/tcp
-netware-ip	396/udp
-https	443/tcp
-https	443/udp
-exec	512/tcp
-biff	512/udp
-login	513/tcp
-who	513/udp
-cmd	514/tcp
-syslog	514/udp
-printer	515/tcp
-printer	515/udp
-talk	517/tcp
-talk	517/udp
-ntalk	518/tcp
-ntalk	518/udp
-timed	525/tcp
-timed	525/udp
-uucp	540/tcp
-uucp	540/udp
-uucp-rlogin	541/tcp
-uucp-rlogin	541/udp
-natd		8668/divert # Network Address Translation
diff --git a/release/picobsd/install/floppy.tree/etc/shells b/release/picobsd/install/floppy.tree/etc/shells
deleted file mode 100644
index df377f1..0000000
--- a/release/picobsd/install/floppy.tree/etc/shells
+++ /dev/null
@@ -1,6 +0,0 @@
-# List of acceptable shells for chpass(1).
-# Ftpd will not allow users to connect who are not using
-# one of these shells.
-
-/bin/sh
-/bin/csh
diff --git a/release/picobsd/install/floppy.tree/etc/start_if.fxp0 b/release/picobsd/install/floppy.tree/etc/start_if.fxp0
deleted file mode 100644
index 03e5989..0000000
--- a/release/picobsd/install/floppy.tree/etc/start_if.fxp0
+++ /dev/null
@@ -1 +0,0 @@
-/stand/dhclient
diff --git a/release/picobsd/install/floppy.tree/etc/termcap b/release/picobsd/install/floppy.tree/etc/termcap
deleted file mode 100644
index 5a9316a..0000000
--- a/release/picobsd/install/floppy.tree/etc/termcap
+++ /dev/null
@@ -1,123 +0,0 @@
-# Copyright (c) 1980, 1985, 1989 The Regents of the University of California.
-# All rights reserved.
-#	@(#)termcap.src	5.88 (Berkeley) 4/30/91
-#
-# 
-# for syscons
-# common entry without semigraphics
-cons25w|ansiw|ansi80x25-raw:\
-	:al=\E[L:am:bs:NP:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:co#80:\
-	:dc=\E[P:dl=\E[M:do=\E[B:bt=\E[Z:ho=\E[H:ic=\E[@:li#25:cb=\E[1K:\
-	:ms:nd=\E[C:pt:rs=\E[x\E[m\Ec:so=\E[7m:se=\E[m:up=\E[A:\
-	:pa#64:Co#8:Sf=\E[3%dm:Sb=\E[4%dm:op=\E[37;40m:\
-	:k1=\E[M:k2=\E[N:k3=\E[O:k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:\
-	:k9=\E[U:k;=\E[V:F1=\E[W:F2=\E[X:K2=\E[E:nw=\E[E:ec=\E[%dX:\
-	:kb=^H:kh=\E[H:ku=\E[A:kd=\E[B:kl=\E[D:kr=\E[C:le=^H:eo:sf=\E[S:sr=\E[T:\
-	:kN=\E[G:kP=\E[I:@7=\E[F:kI=\E[L:kD=\E[K:kB=\E[Z:\
-	:IC=\E[%d@:DC=\E[%dP:SF=\E[%dS:SR=\E[%dT:AL=\E[%dL:DL=\E[%dM:\
-	:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:cv=\E[%i%dd:ch=\E[%i%d`:bw:\
-	:mb=\E[5m:md=\E[1m:mh=\E[30;1m:mr=\E[7m:me=\E[m:bl=^G:ut:it#8:
-cons25|ansis|ansi80x25:\
-	:ac=l\332m\300k\277j\331u\264t\303v\301w\302q\304x\263n\305`^Da\260f\370g\361~\371.^Y-^Xh\261I^U0\333y\363z\362:\
-	:tc=cons25w:
-cons25-m|ansis-mono|ansi80x25-mono:\
-	:pa@:Co@:Sf@:Sb@:op@:us=\E[4m:ue=\E[m:md@:mh@:tc=cons25:
-cons50|ansil|ansi80x50:\
-	:li#50:tc=cons25:
-cons50-m|ansil-mono|ansi80x50-mono:\
-	:li#50:tc=cons25-m:
-# 80x25 ISO 8859-1 FreeBSD console
-cons25l1|cons25-iso8859-1:\
-	:ac=l\215m\216k\214j\213u\226t\225v\227w\230q\222x\231n\217o\220s\224p\221r\223`\201a\202f\207g\210~\237.^Y-^X+\253,\273I\247y\232z\233:\
-	:tc=cons25w:
-cons25l1-m|cons25-iso8859-1-mono:\
-	:pa@:Co@:Sf@:Sb@:op@:us=\E[4m:ue=\E[m:md@:mh@:tc=cons25l1:
-# 80x50 ISO 8859-1 FreeBSD console
-cons50l1|cons50-iso8859-1:\
-	:li#50:tc=cons25l1:
-cons50l1-m|cons50-iso8859-1-mono:\
-	:li#50:tc=cons25l1-m:
-dosansi|ANSI.SYS standard crt|ansi:\
-	:am:bs:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:co#80:\
-	:do=\E[B:li#25:mi:nd=\E[C:\
-	:se=\E[m:so=\E[7m:up=\E[A:us=\E[4m:ue=\E[m:\
-	:md=\E[1m:mh=\E[m:mb=\E[5m:me=\E[m:\
-	:kh=\EG:kb=^h:ku=\EH:kd=\EP:kl=\EK:kr=\EM:\
-	:k1=\E;:k2=\E<:k3=\E=:k4=\E>:k5=\E?:\
-	:k6=\E@:k7=\EA:k8=\EB:k9=\EC:k0=\ED:
-
-# Note: this entry describes the "native"
-# capabilities of the PC monochrome display, without ANY emulation; most
-# communications packages (but NOT PC/IX connect) do some kind of emulation.
-pc|ibmpc|ibm pc PC/IX:\
-	:li#24:co#80:am:bs:bw:eo:\
-	:cd=\E[J:ce=\E[K:cl=\Ec:cm=\E[%i%2;%2H:do=\E[B:ho=\E[;H:\
-	:nd=\E[C:up=\E[A:so=\E[7m:se=\E[0m:us=\E[4m:ue=\E[0m:
-pc3mono|IBM PC 386BSD Console with monochrome monitor:\
-	:so=\E[0;1r\E[m:tc=pc3:
-pc3|ibmpc3|IBM PC 386BSD Console:\
-	:Co#8:\
-	:DO=\E[%dB:\
-	:F1=\E[W:\
-	:F2=\E[X:\
-	:K1=\E[H:\
-	:K2=\E[I:\
-	:K3=\E[E:\
-	:K4=\E[F:\
-	:K5=\E[G:\
-	:LE=\E[%dD:\
-	:RI=\E[%dC:\
-	:Sb=\E[1;%dx:\
-	:Sf=\E[2;%dx:\
-	:UP=\E[%dA:\
-	:ac=l\332m\300k\277j\331u\264t\303v\301w\302q\304x\263n\305`^Da\260f\370g\361~\371.^Y-^Xh\261I^U0\333y\363z\362:\
-	:am:\
-	:bl=^G:\
-	:bs:\
-	:cb=\E[1K:\
-	:cd=\E[J:\
-	:ce=\E[K:\
-	:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:\
-	:co#80:\
-	:cr=^M:\
-	:do=\E[B:\
-	:ho=\E[H:\
-	:is=\E[m:\
-	:it#8:\
-	:k;=\E[V:\
-	:k1=\E[M:\
-	:k2=\E[N:\
-	:k3=\E[O:\
-	:k4=\E[P:\
-	:k5=\E[Q:\
-	:k6=\E[R:\
-	:k7=\E[S:\
-	:k8=\E[T:\
-	:k9=\E[U:\
-	:kD=\177:\
-	:@7=\E[F:\
-	:kN=\E[G:\
-	:kP=\E[I:\
-	:kb=\177:\
-	:kd=\E[B:\
-	:kh=\E[H:\
-	:kl=\E[D:\
-	:kr=\E[C:\
-	:ku=\E[A:\
-	:le=^H:\
-	:li#25:\
-	:ms:\
-	:nd=\E[C:\
-	:op=\E[x:\
-	:pa#64:\
-	:rs=\E[m:\
-	:se=\E[m:\
-	:sf=\E[S:\
-	:so=\E[7;1r\E[7m:\
-	:sr=\E[T:\
-	:ta=^I:\
-	:te=\E[m:\
-	:ti=\E[m:\
-	:up=\E[A:\
-	:ut:
diff --git a/release/picobsd/install/floppy.tree/etc/ttys b/release/picobsd/install/floppy.tree/etc/ttys
deleted file mode 100644
index 8ef5e6e..0000000
--- a/release/picobsd/install/floppy.tree/etc/ttys
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-#	@(#)ttys	5.1 (Berkeley) 4/17/89
-#
-# name	getty				type	status		comments
-#
-# This entry needed for asking password when init goes to single-user mode
-# If you want to be asked for password, change "secure" to "insecure" here
-#console	none				unknown	off secure
-vga	none				cons25	off secure
-#
-ttyv0	"/usr/libexec/getty Pc"		cons25	on  secure
-# Virtual terminals
-ttyv1	"/usr/libexec/getty Pc"		cons25	on  secure
-ttyv2	"/usr/libexec/getty Pc"		cons25	on  secure
-#ttyv3	"/usr/libexec/getty Pc"		cons25	on  secure
-#ttyv4	"/usr/libexec/getty Pc"		cons25	on  secure
-#ttyv5	"/usr/libexec/getty Pc"		cons25	on  secure
-#ttyv6	"/usr/libexec/getty Pc"		cons25	on  secure
-#ttyv7	"/usr/libexec/getty Pc"		cons25	on  secure
-#ttyv8	"/usr/libexec/getty Pc"		cons25	on  secure
-#ttyv9	"/usr/libexec/getty Pc"		cons25	on  secure
-# Pseudo terminals
-ttyp0	none			network secure
-ttyp1	none			network secure
-ttyp2	none			network secure
-ttyp3	none			network
-ttyp4	none			network
-ttyp5	none			network
-ttyp6	none			network
-ttyp7	none			network
-ttyp8	none			network
-ttyp9	none			network
diff --git a/release/picobsd/install/floppy.tree/kernel.config b/release/picobsd/install/floppy.tree/kernel.config
deleted file mode 100644
index e69de29..0000000
--- a/release/picobsd/install/floppy.tree/kernel.config
+++ /dev/null
diff --git a/release/picobsd/install/lang/README.en b/release/picobsd/install/lang/README.en
deleted file mode 100644
index d2482ae..0000000
--- a/release/picobsd/install/lang/README.en
+++ /dev/null
@@ -1,41 +0,0 @@
-1998.07.12, Warsaw, Poland
-
-				PicoBSD @VER@ (NET)
-				-----------------
-
-
-What is PicoBSD?
-----------------
-
-It's a one floppy version of FreeBSD (please see http://www.freebsd.org),
-configured mainly for networking applications. It can be used as a router or
-firewall, or kind of a fixit floppy (or all of them).
-
-You can find more information on the home page of this project at:
-
-		http://www.freebsd.org/~picobsd/
-
-What are minimal requirements?
-------------------------------
-
-* 386SX CPU or better (there is an FPU emulator in kernel)
-* 10MB RAM - the more the better. If you have an HDD, you can make a
-  swap partition or swap file (using vnode driver and vnconfig). Then you
-  probably will be able to run with ca. 6MB only. But RAM is cheap...
-* Modem sitting on COM1-COM4 (default is to use COM2), if you want to have
-  a PPP connection.
-* Network card: compatible with NE2000, PCI Intel, 3Com 3c509 or with DEC
-  chipsets (ed, ep, fxp and de drivers). The kernel supports two of each
-  ISA (i.e. +6 total) plus two PPP connections (tun interfaces). So you can
-  easily build something like router with as many as 8 outlets :-)
-
-For detailed description and list of supported hardware see the original
-documentation, or:
-
-	http://www.freebsd.org/~picobsd/picobsd.html
-
-I'll be glad hearing from you about your experiences with PicoBSD. Thanks.
-
-Have fun!
-  
-Andrzej Bialecki <abial@freebsd.org>
diff --git a/release/picobsd/install/lang/README.pl b/release/picobsd/install/lang/README.pl
deleted file mode 100644
index d7e3f67..0000000
--- a/release/picobsd/install/lang/README.pl
+++ /dev/null
@@ -1,56 +0,0 @@
-1998.07.12, Warszawa
-
-			PicoBSD @VER@ (wersja NET)
-			------------------------
-
-Co to jest PicoBSD?
--------------------
-
-Jest to jednodyskietkowa wersja FreeBSD skonfigurowana glownie pod katem
-zastosowania jako klient/serwer uslug sieciowych (takich jak routing,
-firewall, NFS). W celu zapoznania sie z pelnym systemem zajrzyj na
-http://www.freebsd.org. Oficjalna strona tego projektu znajduje sie na
-http://www.freebsd.org/~picobsd.
-
-Jakie sa minimalne wymagania?
------------------------------
-
-* Procesor 386SX lub lepszy (jadro posiada emulator FPU)
-* 10MB pamieci - jest to absolutnie nieprzekraczalne minimum. Oczywiscie im
-  wiecej, tym lepiej - ograniczenie jest glownie spowodowane brakiem swapu. Po
-  zapoznaniu sie z systemem mozesz sobie skonfigurowac tzw. swap-file na dysku
-  twardym, np. na partycji DOS-owej. Wowczas prawdopodobnie wystarczy 6MB
-  pamieci.
-* Modem, skonfigurowany na COM1-COM4 (standardowo system wykorzystuje COM2),
-  jesli bedzie wykorzystywany dostep przez PPP.
-* Karta sieciowa: kompatybilna z NE2000, niektore typy 3Com, lub wersje PCI z
-  chipsetem DEC21040 (drivery ed, ep, fxp i de). Jadro jest skonfigurowane
-  tak, zeby moc obsluzyc po dwie karty ed, ep, i de (czyli w sumie siedem)
-  oraz dwa polaczenia PPP rownoczesnie. Mozna wiec zbudowac router z 9
-  interfejsami... :-)
-
-Jakie sa roznice w stosunku do poprzedniej wersji?
---------------------------------------------------
-
-* Poszerzony zestaw sterownikow w jadrze systemu
-* dodana obsluga CD-ROM
-* agent SNMP (pelna wersja ucd-snmp, pozwalajaca na monitorowanie procesow i
-  zdalne uruchamianie skryptow)
-* brak ssh, ftp i edytora ee (oznacza to, ze musisz edytowac pliki
-  konfiguracyjne montujac dyskietke na normalnym systemie)
-* dodany inetd, telnetd, routed, tftpd, bootpd, ps, kill, netstat,
-  ping, traceroute
-* brak vnconfig i vn(4): w przypadku routera powinien on miec tyle pamieci
-  RAM, zeby nie potrzebowac swapu, lub miec normalny swap.
-* dodana obsluga hasel (passwd(1))
-* dodana obsluga NFS (klient)
-* sa dwaj uzytkownicy: root (haslo 'setup') i user (haslo 'PicoBSD'). Ze
-  wzgledu na skomplikowana sprawe z prawami dostepu, user praktycznie moze
-  jedynie zrobic te rzeczy, ktore nie wymagaja praw roota (czyli np. telnet).
-* dodany skrypt 'update', ktory powoduje uaktualnienie zawartosci katalogu
-  /etc na dyskietce w stosunku do tego, co znajduje sie na MFS.
-
-
-Milej zabawy!
-  
-Andrzej Bialecki <abial@freebsd.org>
diff --git a/release/picobsd/install/lang/boot.help.en b/release/picobsd/install/lang/boot.help.en
deleted file mode 100644
index 7cbce13..0000000
--- a/release/picobsd/install/lang/boot.help.en
+++ /dev/null
@@ -1,18 +0,0 @@
-Usage: bios_drive:interface(unit,partition)kernel_name options
-    bios_drive   0, 1, ...
-    interface    fd, wd or sd
-    unit         0, 1, ...
-    partition    a, c, ...
-    kernel_name  name of kernel, or ? for list of files in root directory
-    options      -a (ask name) -C (cdrom) -c (userconfig) -D (dual consoles)
-                 -d (debug early) -g (gdb) -h (serial console) -P (probe kbd)
-                 -r (default root) -s (single user) -v (verbose)
-Examples:
-    1:sd(0,a)mykernel  boot `mykernel' on the first SCSI drive when one IDE
-                       drive is present
-    1:wd(2,a)          boot from the second (secondary master) IDE drive
-    1:sd(0,a)?         list the files in the root directory on the specified
-                       drive/unit/partition, and set the default bios_drive,
-                       interface, unit and partition
-    -cv                boot with the defaults, then run UserConfig to modify
-                       hardware parameters (c), and print verbose messages (v)
diff --git a/release/picobsd/install/lang/boot.help.pl b/release/picobsd/install/lang/boot.help.pl
deleted file mode 100644
index bb5b422..0000000
--- a/release/picobsd/install/lang/boot.help.pl
+++ /dev/null
@@ -1,16 +0,0 @@
-Opcje: dysk_bios:kontroler(dysk,partycja)nazwa_kernela opcje
-    dysk_bios    0, 1, ...
-    kontroler    fd (dyskietka), wd (dysk IDE) lub sd (dysk SCSI)
-    dysk         0, 1, ... (numer dysku w kontrolerze)
-    partycja     a, c, e, f ... (wedlug nazewnictwa BSD)
-    nazwa_kernela  nazwa pliku kernela, lub ? zeby dostac liste plikow
-    opcje  -a (pytaj o rootdev) -C (cdrom) -c (userconf.) -D (podwojna konsola)
-           -d (uruchom debugger) -g (gdb) -h (konsola szeregowa)
-           -P (probkuj klawiature) -r (domyslny rootdev) -s (tryb single user)
-           -v (verbose - szczegolowe komunikaty)
-Np: 1:sd(0,a)mykernel  startuj `mykernel' z 1 dysku SCSI gdy jest tez 1 dysk
-                       IDE, i jednoczesnie ustaw go jako domyslny dysk_bios,
-                       kontroler, dysk i partycje
-    -cv                startuj z parametrami domyslnymi, potem uruchom
-                       konfiguracje param. sprzetowych (-c), i podawaj
-                       szczegolowe komunikaty w trakcie bootowania (-v).
diff --git a/release/picobsd/install/lang/hosts.en b/release/picobsd/install/lang/hosts.en
deleted file mode 100644
index 522c181..0000000
--- a/release/picobsd/install/lang/hosts.en
+++ /dev/null
@@ -1,5 +0,0 @@
-# $Id: hosts.en,v 1.1.1.1 1998/08/27 17:38:43 abial Exp $
-# This file should contain the addresses and aliases
-# for local hosts that share this file.
-127.0.0.1		localhost localhost.mydomain.edu
-127.0.0.1		pico.mydomain.edu
diff --git a/release/picobsd/install/lang/hosts.pl b/release/picobsd/install/lang/hosts.pl
deleted file mode 100644
index c3563ea..0000000
--- a/release/picobsd/install/lang/hosts.pl
+++ /dev/null
@@ -1,5 +0,0 @@
-# $Id: hosts.pl,v 1.1.1.1 1998/08/27 17:38:43 abial Exp $
-# This file should contain the addresses and aliases
-# for local hosts that share this file.
-127.0.0.1		localhost localhost.mydomain.org.pl
-127.0.0.1		pico.mydomain.org.pl
diff --git a/release/picobsd/install/lang/motd.en b/release/picobsd/install/lang/motd.en
deleted file mode 100644
index 9719418..0000000
--- a/release/picobsd/install/lang/motd.en
+++ /dev/null
@@ -1,12 +0,0 @@
-==================================================
-                                           )\_)\
-PicoBSD @VER@ (NET)                         (o,o)
-                                        __  \~/
-Welcome to PicoBSD!                     -->====\
-                                        ~~  d d
-You can find a short description of the   picoBSD
-system in file /README. You can view it using
-"more /README".
-
-For more info contact the author (abial@freebsd.org).
-
diff --git a/release/picobsd/install/lang/motd.pl b/release/picobsd/install/lang/motd.pl
deleted file mode 100644
index 4b1fcf5..0000000
--- a/release/picobsd/install/lang/motd.pl
+++ /dev/null
@@ -1,12 +0,0 @@
-=======================================================
-                                                )\_)\
-PicoBSD @VER@ (NET)                              (o,o)
-                                             __  \~/
-Witamy w PicoBSD!                            -->====\
-                                             ~~  d d
-W glownym katalogu w pliku README znajdziesz   picoBSD
-krotki opis systemu. Mozesz go obejrzec przy pomocy
-"more /README".
-
-Wiecej informacji znajdziesz u autora (abial@freebsd.org).
-
diff --git a/release/picobsd/install/lang/resolv.conf.pl b/release/picobsd/install/lang/resolv.conf.pl
deleted file mode 100644
index fe9223b..0000000
--- a/release/picobsd/install/lang/resolv.conf.pl
+++ /dev/null
@@ -1,3 +0,0 @@
-# $Id: resolv.conf.pl,v 1.1.1.1 1998/08/27 17:38:43 abial Exp $
-domain		mydomain.org.pl
-nameserver	148.81.16.51
diff --git a/release/picobsd/install/mfs.mtree b/release/picobsd/install/mfs.mtree
deleted file mode 100644
index 5df3481..0000000
--- a/release/picobsd/install/mfs.mtree
+++ /dev/null
@@ -1,58 +0,0 @@
-#
-# $Id: mfs.mtree,v 1.1.1.1 1998/08/27 17:38:44 abial Exp $
-#
-/set type=dir uname=root gname=wheel mode=0755
-.              
-    dev            
-    ..
-    dos            
-    ..
-    etc            
-    ..
-    home           
-        user           
-        ..
-    ..
-    mnt            
-    ..
-    mnt1           
-    ..
-    mnt2           
-    ..
-    proc           
-    ..
-    root           
-    ..
-    stand          
-    ..
-    start_floppy   
-    ..
-    tftpboot       
-    ..
-    tmp            mode=01777
-    ..
-    usr            
-        local          
-            share            
-                snmp           
-		    mibs
-		    ..
-                ..
-            ..
-        ..
-        share          
-            misc           
-            ..
-        ..
-    ..
-    var            
-        db             
-        ..
-        run            
-        ..
-        spool          
-            lock           
-            ..
-        ..
-    ..
-..