Garbage collect gnu/usr.bin/binutils/{gasp,gdb,gdbreplay}, as these have

not been connected to the build for 6 years now.

26 files changed, 0 insertions, 3330 deletions

diff --git a/gnu/usr.bin/binutils/gasp/Makefile b/gnu/usr.bin/binutils/gasp/Makefile
deleted file mode 100644
index 51ea9d9..0000000
--- a/gnu/usr.bin/binutils/gasp/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-# $FreeBSD$
-
-.include "../Makefile.inc0"
-
-.PATH: ${SRCDIR}/gas
-
-PROG=	gasp
-SRCS+=	gasp.c macro.c sb.c hash.c xregex.h
-WARNS?=	2
-CFLAGS+= -DBFD_ASSEMBLER
-CFLAGS+= -I${.CURDIR}/../as/${TARGET_ARCH}-freebsd -I${.CURDIR}/../as
-CFLAGS+= -I${.CURDIR}
-CFLAGS+= -I${SRCDIR} -I${SRCDIR}/gas -I${SRCDIR}/gas/config
-DPADD=	${RELTOP}/libiberty/libiberty.a
-LDADD=	${DPADD}
-CLEANFILES=	xregex.h
-
-xregex.h:
-	@echo '#include <regex.h>' >${.TARGET}
-
-.include <bsd.prog.mk>
diff --git a/gnu/usr.bin/binutils/gasp/gasp.1 b/gnu/usr.bin/binutils/gasp/gasp.1
deleted file mode 100644
index 5aaff9a..0000000
--- a/gnu/usr.bin/binutils/gasp/gasp.1
+++ /dev/null
@@ -1,115 +0,0 @@
-.\" Copyright (c) 1999
-.\"	The Regents of the University of California.  All rights reserved.
-.\"	and David E. O'Brien
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $FreeBSD$
-.\"
-.Dd December 29, 1999
-.Dt GASP 1
-.Os
-.Sh NAME
-.Nm gasp
-.Nd the GNU Assembler Macro Preprocessor
-.Sh SYNOPSIS
-.Nm
-.Op Fl adhMpsuv
-.Op Fl c Ar char
-.Op Fl o Ar outfile
-.Op Fl D Ns Ar name=value
-.Op Fl I Ns Ar path
-.Op infile
-.Sh DESCRIPTION
-.Nm
-is the GNU Assembler Macro Preprocessor.
-The argument
-.Ar infile
-is processed and the resulting text is sent to the standard output.
-.Pp
-The options are as follows:
-.Bl -tag -width "-Dname=value"
-.It Fl a
-Enter enter alternate macro mode.
-Also specifiable as
-.Op Fl \-alternate
-.It Fl c Ar char
-Change the comment character from `!'
-Also specifiable as
-.Op Fl \-commentchar\ char
-.It Fl d
-Print limited debugging information.
-Also specifiable as
-.Op Fl \-debug
-.It Fl h
-Print the help message.
-Also specifiable as
-.Op Fl \-help
-.It Fl M
-Enter MRI compatibility mode
-Also specifiable as
-.Op Fl \-mri
-.It Fl o Ar outfile
-Specify the output file.
-Also specifiable as
-.Op Fl \-output\ outfile
-.It Fl p
-Print line numbers.
-Also specifiable as
-.Op Fl \-print
-.It Fl s
-Copy source through as comments.
-Also specifiable as
-.Op Fl \-copysource
-.It Fl u
-Allow unreasonable nesting.
-Also specifiable as
-.Op Fl \-unreasonable
-.It Fl v
-Print the program version and exit.
-Also specifiable as
-.Op Fl \-version
-.It Fl D Ns Ar name=value
-Define the preprocessor symbol
-.Ar name
-to have the value specified by "value".
-.It Fl I Ns Ar path
-Add
-.Ar path
-to the include path list.
-.El
-.Sh SEE ALSO
-.Xr cpp 1 ,
-.Xr m4 1
-.Rs
-.%T The gasp GNU hypertext system info pages
-.Re
-.Sh HISTORY
-The
-.Nm
-command is part of the GNU Binutils package.
-.Sh AUTHORS
-This man page was written by
-.An David E. O'Brien .
diff --git a/gnu/usr.bin/binutils/gdb/Makefile b/gnu/usr.bin/binutils/gdb/Makefile
deleted file mode 100644
index f51d9e3..0000000
--- a/gnu/usr.bin/binutils/gdb/Makefile
+++ /dev/null
@@ -1,139 +0,0 @@
-# ex:ts=8
-# $FreeBSD$
-
-.include "../Makefile.inc0"
-
-GDBDIR= ${.CURDIR}/../../../../contrib/gdb
-.PATH: ${GDBDIR}/gdb ${GDBDIR}/gdb/cli ${GDBDIR}/gdb/mi
-.PATH: ${SRCDIR}/opcodes ${SRCDIR}/binutils
-
-#	For FSF GDB files, use their CPU (arch) name; for our files use ours.
-GDB_CPU=${TARGET_CPUARCH:C/amd64/i386/:C/powerpc.*/rs6000/:C/sparc64/sparc/}
-NO_SHARED?=yes
-PROG=	gdb
-XSRCS=	annotate.c arch-utils.c ax-general.c ax-gdb.c bcache.c		\
-	blockframe.c breakpoint.c buildsym.c complaints.c completer.c	\
-	copying.c corefile.c corelow.c dcache.c doublest.c event-loop.c	\
-	event-top.c environ.c eval.c exec.c expprint.c fork-child.c	\
-	frame.c gdb-events.c gdbarch.c gdbtypes.c infcmd.c inflow.c	\
-	infptrace.c inf-loop.c infrun.c inftarg.c language.c linespec.c	\
-	main.c maint.c mdebugread.c mem-break.c memattr.c minsyms.c	\
-	objfiles.c parse.c printcmd.c regcache.c remote.c		\
-	remote-utils.c signals.c source.c stabsread.c stack.c symfile.c	\
-	symmisc.c symtab.c target.c thread.c top.c tracepoint.c		\
-	typeprint.c ui-file.c ui-out.c utils.c valarith.c valops.c	\
-	varobj.c valprint.c values.c wrapper.c				\
-	cli-cmds.c cli-cmds.h cli-decode.c cli-decode.h	cli-out.c	\
-	cli-script.c cli-script.h cli-setshow.c cli-setshow.h		\
-	cli-utils.c cli-utils.h						\
-	mi-cmd-break.c mi-cmd-disas.c mi-cmd-stack.c mi-cmd-var.c	\
-	mi-cmds.c mi-console.c mi-getopt.c mi-main.c mi-out.c mi-parse.c\
-	serial.c ser-unix.c ser-tcp.c					\
-	c-exp.y c-lang.c c-typeprint.c c-valprint.c			\
-	ch-exp.c ch-lang.c ch-typeprint.c ch-valprint.c			\
-	cp-abi.c gnu-v2-abi.c gnu-v3-abi.c cp-valprint.c demangle.c	\
-	f-exp.y f-lang.c f-typeprint.c f-valprint.c findvar.c		\
-	jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c nlmread.c	\
-	m2-lang.c m2-exp.y m2-typeprint.c m2-valprint.c			\
-	scm-exp.c scm-lang.c scm-valprint.c				\
-	coffread.c dbxread.c dwarfread.c dwarf2read.c elfread.c		\
-	solib.c solib-svr4.c solib-legacy.c
-XSRCS+=	freebsd-uthread.c kvm-fbsd.c kvm-fbsd-machine.h solib-fbsd-kld.c
-SRCS=	init.c ${XSRCS} nm.h tm.h xm.h gdbversion.c xregex.h
-
-.include "${.CURDIR}/Makefile.${TARGET_ARCH}"
-
-WARNS?=	0
-.if ${TARGET_ARCH} != ${MACHINE_ARCH}
-CFLAGS+=	-DCROSS_COMPILE=1
-.endif
-CFLAGS+=	-DDEFAULT_BFD_ARCH=bfd_${GDB_CPU}_arch
-CFLAGS+=	-I${.CURDIR}/${TARGET_CPUARCH}
-CFLAGS+=	-I${SRCDIR}/binutils -I${SRCDIR}/bfd
-CFLAGS+=	-I${GDBDIR}/gdb -I${GDBDIR}/gdb/config
-CFLAGS+=        -I$(.CURDIR)
-
-YFLAGS=
-
-DPADD=		${LIBKVM} ${LIBM}
-DPADD+=		${RELTOP}/libbfd/libbfd.a ${RELTOP}/libopcodes/libopcodes.a
-DPADD+=		${LIBGNUREGEX}
-DPADD+=		${RELTOP}/libiberty/libiberty.a
-DPADD+=		${LIBREADLINE} ${LIBTERMCAP}
-LDADD=		-lkvm -lm
-LDADD+=		${RELTOP}/libbfd/libbfd.a ${RELTOP}/libopcodes/libopcodes.a
-LDADD+=		-lgnuregex
-LDADD+=		${RELTOP}/libiberty/libiberty.a
-LDADD+=		-lreadline -ltermcap
-
-CLEANFILES=	init.c init.c-tmp nm.h tm.h xm.h gdbversion.c xregex.h kvm-fbsd-machine.h
-
-# We do this by grepping through sources.  If that turns out to be too slow,
-# maybe we could just require every .o file to have an initialization routine
-# of a given name (remote-udi.o -> _initialize_remote_udi, etc.).
-#
-# Formatting conventions:  The name of the _initialize_* routines must start
-# in column zero, and must not be inside #if.
-#
-# Note that the set of files with init functions might change, or the names
-# of the functions might change, so this files needs to depend on all the
-# object files that will be linked into gdb.
-
-init.c: ${XSRCS}
-	@${ECHO} Making ${.TARGET}
-	@rm -f init.c-tmp
-	@echo '/* Do not modify this file.  */' >init.c-tmp
-	@echo '/* It is created automatically by the Makefile.  */'>>init.c-tmp
-	@echo '#include "defs.h"'		>>init.c-tmp
-	@echo '#include "call-cmds.h"'		>>init.c-tmp
-	@echo 'void initialize_all_files () {' >>init.c-tmp
-	@for i in ${.ALLSRC} ; do \
-	  filename=`echo $$i | sed \
-	    -e '/^Onindy.c/d' \
-	    -e '/^nindy.c/d' \
-	    -e '/ttyflush.c/d' \
-	    -e '/xdr_ld.c/d' \
-	    -e '/xdr_ptrace.c/d' \
-	    -e '/xdr_rdb.c/d' \
-	    -e '/udr.c/d' \
-	    -e '/udip2soc.c/d' \
-	    -e '/udi2go32.c/d' \
-	    -e '/version.c/d' \
-	    -e '/^[a-z0-9A-Z_]*_[SU].c/d' \
-	    -e '/[a-z0-9A-Z_]*-exp.tab.c/d'` ; \
-	  case $$filename in \
-	    "") ;; \
-	    *) sed <$$filename >>init.c-tmp -n \
-	-e '/^_initialize_[a-z_0-9A-Z]* *(/s/^\([a-z_0-9A-Z]*\).*/  {extern void \1 (); \1 ();}/p' ; ;; \
-	  esac ; \
-	done
-	@echo '}' >>init.c-tmp
-	@mv init.c-tmp ${.TARGET}
-
-.PRECIOUS: init.c
-
-tm.h:
-	echo '#include "${GDB_CPU}/tm-fbsd.h"'		> ${.TARGET}
-.if exists(${.CURDIR}/fbsd-kgdb-${TARGET_CPUARCH}.h)
-	echo '#include "fbsd-kgdb-${TARGET_CPUARCH}.h"'	>> ${.TARGET}
-.endif
-
-.for H in nm-fbsd xm-${GDB_CPU}
-${H:C/-.*$//}.h:
-	ln -sf ${GDBDIR}/gdb/config/${GDB_CPU}/${H}.h ${.TARGET}
-.endfor
-
-kvm-fbsd-machine.h:
-	ln -sf ${.CURDIR}/kvm-fbsd-${TARGET_CPUARCH}.h ${.TARGET}
-
-GDB_VERSION=	"5.2.1 (FreeBSD)"
-gdbversion.c: Makefile
-	@echo '#include "version.h"'				> ${.TARGET}
-	@echo 'const char version[] = ${GDB_VERSION};'		>>${.TARGET}
-	@echo 'const char host_name[] = "${MACHINE_ARCH}-undermydesk-freebsd";'			>>${.TARGET}
-	@echo 'const char target_name[] = "${TARGET_ARCH}-undermydesk-freebsd";'		>>${.TARGET}
-
-xregex.h:
-	@echo '#include <gnu/regex.h>' >${.TARGET}
-
-.include <bsd.prog.mk>
diff --git a/gnu/usr.bin/binutils/gdb/Makefile.arm b/gnu/usr.bin/binutils/gdb/Makefile.arm
deleted file mode 100644
index 3a8bcff..0000000
--- a/gnu/usr.bin/binutils/gdb/Makefile.arm
+++ /dev/null
@@ -1,5 +0,0 @@
-# $FreeBSD$
-
-XSRCS+=	armnbsd-nat.c armnbsd-tdep.c arm-tdep.c \
-	core-regset.c
-CFLAGS+= -DDEFAULT_BFD_VEC=bfd_elf32_arm_vec
diff --git a/gnu/usr.bin/binutils/gdb/Makefile.i386 b/gnu/usr.bin/binutils/gdb/Makefile.i386
deleted file mode 100644
index 14e7a3f..0000000
--- a/gnu/usr.bin/binutils/gdb/Makefile.i386
+++ /dev/null
@@ -1,9 +0,0 @@
-# $FreeBSD$
-
-XSRCS+=	i386fbsd-nat.c i386bsd-tdep.c i386bsd-nat.c i386-nat.c i386-tdep.c \
-	i387-nat.c i387-tdep.c \
-	core-regset.c core-aout.c
-
-CFLAGS+= -Dprint_insn_i386=print_insn_i386_att
-CFLAGS+= -DDEFAULT_BFD_VEC=bfd_elf32_i386_freebsd_vec
-CFLAGS+= -DGDB_XM_FILE
diff --git a/gnu/usr.bin/binutils/gdb/Makefile.ia64 b/gnu/usr.bin/binutils/gdb/Makefile.ia64
deleted file mode 100644
index 08283c7..0000000
--- a/gnu/usr.bin/binutils/gdb/Makefile.ia64
+++ /dev/null
@@ -1,5 +0,0 @@
-# $FreeBSD$
-
-XSRCS+=	ia64-tdep.c ia64-fbsd-nat.c \
-	core-regset.c
-CFLAGS+= -DDEFAULT_BFD_VEC=bfd_elf64_ia64_vec
diff --git a/gnu/usr.bin/binutils/gdb/Makefile.powerpc b/gnu/usr.bin/binutils/gdb/Makefile.powerpc
deleted file mode 100644
index b5f9778..0000000
--- a/gnu/usr.bin/binutils/gdb/Makefile.powerpc
+++ /dev/null
@@ -1,5 +0,0 @@
-# $FreeBSD$
-
-XSRCS+=	ppcnbsd-nat.c ppc-tdep.c \
-	core-regset.c
-CFLAGS+= -DDEFAULT_BFD_VEC=bfd_elf32_powerpc_vec
diff --git a/gnu/usr.bin/binutils/gdb/Makefile.powerpc64 b/gnu/usr.bin/binutils/gdb/Makefile.powerpc64
deleted file mode 100644
index 4cea113..0000000
--- a/gnu/usr.bin/binutils/gdb/Makefile.powerpc64
+++ /dev/null
@@ -1,5 +0,0 @@
-# $FreeBSD$
-
-XSRCS+=	ppcnbsd-nat.c ppc-tdep.c \
-	core-regset.c
-CFLAGS+= -DDEFAULT_BFD_VEC=bfd_elf64_powerpc_vec
diff --git a/gnu/usr.bin/binutils/gdb/Makefile.sparc64 b/gnu/usr.bin/binutils/gdb/Makefile.sparc64
deleted file mode 100644
index 5eb0f2e..0000000
--- a/gnu/usr.bin/binutils/gdb/Makefile.sparc64
+++ /dev/null
@@ -1,4 +0,0 @@
-# $FreeBSD$
-
-XSRCS+=	sparc-nat.c sparc-tdep.c
-CFLAGS+= -DDEFAULT_BFD_VEC=bfd_elf64_sparc_vec
diff --git a/gnu/usr.bin/binutils/gdb/config.h b/gnu/usr.bin/binutils/gdb/config.h
deleted file mode 100644
index a573126..0000000
--- a/gnu/usr.bin/binutils/gdb/config.h
+++ /dev/null
@@ -1,505 +0,0 @@
-/* $FreeBSD$ */
-
-/* config.h.  Generated automatically by configure.  */
-/* config.in.  Generated automatically from configure.in by autoheader.  */
-
-/* Define if on AIX 3.
-   System headers sometimes define this.
-   We just want to avoid a redefinition error message.  */
-#ifndef _ALL_SOURCE
-/* #undef _ALL_SOURCE */
-#endif
-
-/* Define if using alloca.c.  */
-/* #undef C_ALLOCA */
-
-/* Define to empty if the keyword does not work.  */
-/* #undef const */
-
-/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
-   This function is required for alloca.c support on those systems.  */
-/* #undef CRAY_STACKSEG_END */
-
-/* Define if you have alloca, as a function or macro.  */
-#define HAVE_ALLOCA 1
-
-/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
-/* #undef HAVE_ALLOCA_H */
-
-/* Define if the `long double' type works.  */
-#define HAVE_LONG_DOUBLE 1
-
-/* Define if you have a working `mmap' system call.  */
-#define HAVE_MMAP 1
-
-/* Define if you have <vfork.h>.  */
-/* #undef HAVE_VFORK_H */
-
-/* Define as __inline if that's what the C compiler calls it.  */
-/* #undef inline */
-
-/* Define to `long' if <sys/types.h> doesn't define.  */
-/* #undef off_t */
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-/* #undef pid_t */
-
-/* Define as the return type of signal handlers (int or void).  */
-#define RETSIGTYPE void
-
-/* Define if the `setpgrp' function takes no argument.  */
-/* #undef SETPGRP_VOID */
-
-/* Define to `unsigned' if <sys/types.h> doesn't define.  */
-/* #undef size_t */
-
-/* If using the C implementation of alloca, define if you know the
-   direction of stack growth for your system; otherwise it will be
-   automatically deduced at run-time.
- STACK_DIRECTION > 0 => grows toward higher addresses
- STACK_DIRECTION < 0 => grows toward lower addresses
- STACK_DIRECTION = 0 => direction of growth unknown
- */
-/* #undef STACK_DIRECTION */
-
-/* Define if the `S_IS*' macros in <sys/stat.h> do not work properly.  */
-/* #undef STAT_MACROS_BROKEN */
-
-/* Define if you have the ANSI C header files.  */
-#define STDC_HEADERS 1
-
-/* Define vfork as fork if vfork does not work.  */
-/* #undef vfork */
-
-/* Define if compiling on Solaris 7. */
-/* #undef _MSE_INT_H */
-
-/* Define if your struct reg has r_fs.  */
-#define HAVE_STRUCT_REG_R_FS 1
-
-/* Define if your struct reg has r_gs.  */
-#define HAVE_STRUCT_REG_R_GS 1
-
-/* Define if <link.h> exists and defines struct link_map which has
-   members with an ``l_'' prefix.  (For Solaris, SVR4, and
-   SVR4-like systems.) */
-#define HAVE_STRUCT_LINK_MAP_WITH_L_MEMBERS 1
-
-/* Define if <link.h> exists and defines struct link_map which has
-  members with an ``lm_'' prefix.  (For SunOS.)  */
-/* #undef HAVE_STRUCT_LINK_MAP_WITH_LM_MEMBERS */
-
-/* Define if <link.h> exists and defines a struct so_map which has
-  members with an ``som_'' prefix.  (Found on older *BSD systems.)  */
-/* #undef HAVE_STRUCT_SO_MAP_WITH_SOM_MEMBERS */
-
-/* Define if <sys/link.h> has struct link_map32 */
-/* #undef HAVE_STRUCT_LINK_MAP32 */
-
-/* Define if the prfpregset_t type is broken. */
-/* #undef PRFPREGSET_T_BROKEN */
-
-/* Define if you want to use new multi-fd /proc interface
-   (replaces HAVE_MULTIPLE_PROC_FDS as well as other macros). */
-/* #undef NEW_PROC_API */
-
-/* Define if ioctl argument PIOCSET is available. */
-/* #undef HAVE_PROCFS_PIOCSET */
-
-/* Define if the `long long' type works.  */
-#define CC_HAS_LONG_LONG 1
-
-/* Define if the "ll" format works to print long long ints. */
-#define PRINTF_HAS_LONG_LONG 1
-
-/* Define if the "%Lg" format works to print long doubles. */
-#define PRINTF_HAS_LONG_DOUBLE 1
-
-/* Define if the "%Lg" format works to scan long doubles. */
-#define SCANF_HAS_LONG_DOUBLE 1
-
-/* Define if using Solaris thread debugging.  */
-/* #undef HAVE_THREAD_DB_LIB */
-
-/* Define on a GNU/Linux system to work around problems in sys/procfs.h.  */
-/* #undef START_INFERIOR_TRAPS_EXPECTED */
-/* #undef sys_quotactl */
-
-/* Define if you have HPUX threads */
-/* #undef HAVE_HPUX_THREAD_SUPPORT */
-
-/* Define if you want to use the memory mapped malloc package (mmalloc). */
-/* #undef USE_MMALLOC */
-
-/* Define if the runtime uses a routine from mmalloc before gdb has a chance
-   to initialize mmalloc, and we want to force checking to be used anyway.
-   This may cause spurious memory corruption messages if the runtime tries
-   to explicitly deallocate that memory when gdb calls exit. */
-/* #undef MMCHECK_FORCE */
-
-/* Define if <proc_service.h> on solaris uses int instead of
-   size_t, and assorted other type changes. */
-/* #undef PROC_SERVICE_IS_OLD */
-
-/* If you want to specify a default CPU variant, define this to be its
-   name, as a C string.  */
-/* #undef TARGET_CPU_DEFAULT */
-
-/* Define if the simulator is being linked in.  */
-/* #undef WITH_SIM */
-
-/* Set to true if the save_state_t structure is present */
-/* #undef HAVE_STRUCT_SAVE_STATE_T */
-
-/* Set to true if the save_state_t structure has the ss_wide member */
-/* #undef HAVE_STRUCT_MEMBER_SS_WIDE */
-
-/* Define if <sys/ptrace.h> defines the PTRACE_GETREGS request.  */
-/* #undef HAVE_PTRACE_GETREGS */
-
-/* Define if <sys/ptrace.h> defines the PTRACE_GETFPXREGS request.  */
-/* #undef HAVE_PTRACE_GETFPXREGS */
-
-/* Define if <sys/ptrace.h> defines the PT_GETDBREGS request.  */
-#define HAVE_PT_GETDBREGS 1
-
-/* Define if <sys/ptrace.h> defines the PT_GETXMMREGS request.  */
-/* #undef HAVE_PT_GETXMMREGS */
-
-/* Define if gnu-regex.c included with GDB should be used. */
-#define USE_INCLUDED_REGEX 1
-
-/* BFD's default architecture. */
-/* #define DEFAULT_BFD_ARCH bfd_alpha_arch */
-
-/* BFD's default target vector. */
-/* #define DEFAULT_BFD_VEC bfd_elf64_alpha_vec */
-
-/* Multi-arch enabled. */
-/* #undef GDB_MULTI_ARCH */
-
-/* hostfile */
-/* #define GDB_XM_FILE 1 */
-
-/* targetfile */
-#define GDB_TM_FILE 1
-
-/* nativefile */
-#define GDB_NM_FILE 1
-
-/* Define if you have the __argz_count function.  */
-/* #undef HAVE___ARGZ_COUNT */
-
-/* Define if you have the __argz_next function.  */
-/* #undef HAVE___ARGZ_NEXT */
-
-/* Define if you have the __argz_stringify function.  */
-/* #undef HAVE___ARGZ_STRINGIFY */
-
-/* Define if you have the bcopy function.  */
-#define HAVE_BCOPY 1
-
-/* Define if you have the btowc function.  */
-/* #undef HAVE_BTOWC */
-
-/* Define if you have the bzero function.  */
-#define HAVE_BZERO 1
-
-/* Define if you have the canonicalize_file_name function.  */
-/* #undef HAVE_CANONICALIZE_FILE_NAME */
-
-/* Define if you have the dcgettext function.  */
-/* #undef HAVE_DCGETTEXT */
-
-/* Define if you have the getcwd function.  */
-#define HAVE_GETCWD 1
-
-/* Define if you have the getpagesize function.  */
-#define HAVE_GETPAGESIZE 1
-
-/* Define if you have the isascii function.  */
-#define HAVE_ISASCII 1
-
-/* Define if you have the munmap function.  */
-#define HAVE_MUNMAP 1
-
-/* Define if you have the poll function.  */
-#define HAVE_POLL 1
-
-/* Define if you have the putenv function.  */
-#define HAVE_PUTENV 1
-
-/* Define if you have the realpath function.  */
-#define HAVE_REALPATH 1
-
-/* Define if you have the sbrk function.  */
-#define HAVE_SBRK 1
-
-/* Define if you have the setenv function.  */
-#define HAVE_SETENV 1
-
-/* Define if you have the setlocale function.  */
-#define HAVE_SETLOCALE 1
-
-/* Define if you have the setpgid function.  */
-#define HAVE_SETPGID 1
-
-/* Define if you have the setpgrp function.  */
-#define HAVE_SETPGRP 1
-
-/* Define if you have the sigaction function.  */
-#define HAVE_SIGACTION 1
-
-/* Define if you have the sigprocmask function.  */
-#define HAVE_SIGPROCMASK 1
-
-/* Define if you have the sigsetmask function.  */
-#define HAVE_SIGSETMASK 1
-
-/* Define if you have the socketpair function.  */
-#define HAVE_SOCKETPAIR 1
-
-/* Define if you have the stpcpy function.  */
-#define HAVE_STPCPY 1
-
-/* Define if you have the strcasecmp function.  */
-#define HAVE_STRCASECMP 1
-
-/* Define if you have the strchr function.  */
-#define HAVE_STRCHR 1
-
-/* Define if you have the <argz.h> header file.  */
-/* #undef HAVE_ARGZ_H */
-
-/* Define if you have the <asm/debugreg.h> header file.  */
-/* #undef HAVE_ASM_DEBUGREG_H */
-
-/* Define if you have the <ctype.h> header file.  */
-#define HAVE_CTYPE_H 1
-
-/* Define if you have the <curses.h> header file.  */
-#define HAVE_CURSES_H 1
-
-/* Define if you have the <dirent.h> header file.  */
-#define HAVE_DIRENT_H 1
-
-/* Define if you have the <limits.h> header file.  */
-#define HAVE_LIMITS_H 1
-
-/* Define if you have the <link.h> header file.  */
-#define HAVE_LINK_H 1
-
-/* Define if you have the <locale.h> header file.  */
-#define HAVE_LOCALE_H 1
-
-/* Define if you have the <malloc.h> header file.  */
-/* #undef HAVE_MALLOC_H */
-
-/* Define if you have the <memory.h> header file.  */
-#define HAVE_MEMORY_H 1
-
-/* Define if you have the <ncurses.h> header file.  */
-#define HAVE_NCURSES_H 1
-
-/* Define if you have the <ndir.h> header file.  */
-/* #undef HAVE_NDIR_H */
-
-/* Define if you have the <nl_types.h> header file.  */
-#define HAVE_NL_TYPES_H 1
-
-/* Define if you have the <nlist.h> header file.  */
-#define HAVE_NLIST_H 1
-
-/* Define if you have the <objlist.h> header file.  */
-/* #undef HAVE_OBJLIST_H */
-
-/* Define if you have the <poll.h> header file.  */
-#define HAVE_POLL_H 1
-
-/* Define if you have the <proc_service.h> header file.  */
-/* #undef HAVE_PROC_SERVICE_H */
-
-/* Define if you have the <ptrace.h> header file.  */
-/* #undef HAVE_PTRACE_H */
-
-/* Define if you have the <sgtty.h> header file.  */
-#define HAVE_SGTTY_H 1
-
-/* Define if you have the <stddef.h> header file.  */
-#define HAVE_STDDEF_H 1
-
-/* Define if you have the <stdint.h> header file.  */
-#define HAVE_STDINT_H 1
-
-/* Define if you have the <stdlib.h> header file.  */
-#define HAVE_STDLIB_H 1
-
-/* Define if you have the <string.h> header file.  */
-#define HAVE_STRING_H 1
-
-/* Define if you have the <sys/debugreg.h> header file.  */
-/* #undef HAVE_SYS_DEBUGREG_H */
-
-/* Define if you have the <sys/dir.h> header file.  */
-/* #undef HAVE_SYS_DIR_H */
-
-/* Define if you have the <sys/fault.h> header file.  */
-/* #undef HAVE_SYS_FAULT_H */
-
-/* Define if you have the <sys/file.h> header file.  */
-#define HAVE_SYS_FILE_H 1
-
-/* Define if you have the <sys/filio.h> header file.  */
-#define HAVE_SYS_FILIO_H 1
-
-/* Define if you have the <sys/ioctl.h> header file.  */
-#define HAVE_SYS_IOCTL_H 1
-
-/* Define if you have the <sys/ndir.h> header file.  */
-/* #undef HAVE_SYS_NDIR_H */
-
-/* Define if you have the <sys/param.h> header file.  */
-#define HAVE_SYS_PARAM_H 1
-
-/* Define if you have the <sys/poll.h> header file.  */
-#define HAVE_SYS_POLL_H 1
-
-/* Define if you have the <sys/procfs.h> header file.  */
-#define HAVE_SYS_PROCFS_H 1
-
-/* Define if you have the <sys/ptrace.h> header file.  */
-#define HAVE_SYS_PTRACE_H 1
-
-/* Define if you have the <sys/reg.h> header file.  */
-/* #undef HAVE_SYS_REG_H */
-
-/* Define if you have the <sys/select.h> header file.  */
-#define HAVE_SYS_SELECT_H 1
-
-/* Define if you have the <sys/syscall.h> header file.  */
-#define HAVE_SYS_SYSCALL_H 1
-
-/* Define if you have the <sys/user.h> header file.  */
-#define HAVE_SYS_USER_H 1
-
-/* Define if you have the <sys/wait.h> header file.  */
-#define HAVE_SYS_WAIT_H 1
-
-/* Define if you have the <term.h> header file.  */
-#define HAVE_TERM_H 1
-
-/* Define if you have the <termio.h> header file.  */
-/* #undef HAVE_TERMIO_H */
-
-/* Define if you have the <termios.h> header file.  */
-#define HAVE_TERMIOS_H 1
-
-/* Define if you have the <thread_db.h> header file.  */
-/* #undef HAVE_THREAD_DB_H */
-
-/* Define if you have the <time.h> header file.  */
-#define HAVE_TIME_H 1
-
-/* Define if you have the <unistd.h> header file.  */
-#define HAVE_UNISTD_H 1
-
-/* Define if you have the <values.h> header file.  */
-/* #undef HAVE_VALUES_H */
-
-/* Define if you have the <wait.h> header file.  */
-/* #undef HAVE_WAIT_H */
-
-/* Define if you have the <wchar.h> header file.  */
-#define HAVE_WCHAR_H 1
-
-/* Define if you have the <wctype.h> header file.  */
-#define HAVE_WCTYPE_H 1
-
-/* Define if you have the dl library (-ldl).  */
-/* #undef HAVE_LIBDL */
-
-/* Define if you have the m library (-lm).  */
-#define HAVE_LIBM 1
-
-/* Define if you have the socket library (-lsocket).  */
-/* #undef HAVE_LIBSOCKET */
-
-/* Define if you have the w library (-lw).  */
-/* #undef HAVE_LIBW */
-
-/* Define if you have the stpcpy function */
-#define HAVE_STPCPY 1
-
-/* Define if your locale.h file contains LC_MESSAGES. */
-#define HAVE_LC_MESSAGES 1
-
-/* Define to 1 if NLS is requested */
-/* #define ENABLE_NLS 1 */
-
-/* Define as 1 if you have gettext and don't want to use GNU gettext. */
-/* #undef HAVE_GETTEXT */
-
-/* Define if sigsetjmp is available.  */
-#define HAVE_SIGSETJMP 1
-
-/* Define if malloc is not declared in system header files. */
-/* #undef NEED_DECLARATION_MALLOC */
-
-/* Define if realloc is not declared in system header files. */
-/* #undef NEED_DECLARATION_REALLOC */
-
-/* Define if free is not declared in system header files. */
-/* #undef NEED_DECLARATION_FREE */
-
-/* Define if strerror is not declared in system header files. */
-/* #undef NEED_DECLARATION_STRERROR */
-
-/* Define if strdup is not declared in system header files. */
-/* #undef NEED_DECLARATION_STRDUP */
-
-/* Define if strstr is not declared in system header files. */
-/* #undef NEED_DECLARATION_STRSTR */
-
-/* Define if <sys/procfs.h> has pstatus_t. */
-/* #undef HAVE_PSTATUS_T */
-
-/* Define if <sys/procfs.h> has prrun_t. */
-/* #undef HAVE_PRRUN_T */
-
-/* Define if <sys/procfs.h> has gregset_t. */
-#ifndef CROSS_COMPILE
-#define HAVE_GREGSET_T 1
-#endif
-
-/* Define if <sys/procfs.h> has fpregset_t. */
-#define HAVE_FPREGSET_T 1
-
-/* Define if <sys/procfs.h> has prgregset_t. */
-/* #undef HAVE_PRGREGSET_T */
-
-/* Define if <sys/procfs.h> has prfpregset_t. */
-#define HAVE_PRFPREGSET_T 1
-
-/* Define if <sys/procfs.h> has prgregset32_t. */
-/* #undef HAVE_PRGREGSET32_T */
-
-/* Define if <sys/procfs.h> has prfpregset32_t. */
-/* #undef HAVE_PRFPREGSET32_T */
-
-/* Define if <sys/procfs.h> has lwpid_t. */
-/* #undef HAVE_LWPID_T */
-
-/* Define if <sys/procfs.h> has psaddr_t. */
-/* #undef HAVE_PSADDR_T */
-
-/* Define if <sys/procfs.h> has prsysent_t. */
-/* #undef HAVE_PRSYSENT_T */
-
-/* Define if <sys/procfs.h> has pr_sigset_t. */
-/* #undef HAVE_PR_SIGSET_T */
-
-/* Define if <sys/procfs.h> has pr_sigaction64_t. */
-/* #undef HAVE_PR_SIGACTION64_T */
-
-/* Define if <sys/procfs.h> has pr_siginfo64_t. */
-/* #undef HAVE_PR_SIGINFO64_T */
diff --git a/gnu/usr.bin/binutils/gdb/fbsd-kgdb-alpha.h b/gnu/usr.bin/binutils/gdb/fbsd-kgdb-alpha.h
deleted file mode 100644
index 6b5cf20..0000000
--- a/gnu/usr.bin/binutils/gdb/fbsd-kgdb-alpha.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* $FreeBSD$ */
-
-#ifndef FBSD_KGDB_ALPHA_H
-#define FBSD_KGDB_ALPHA_H
-
-#include "alpha/tm-fbsd.h"
-#include "fbsd-kgdb.h"
-
-#undef  FRAME_SAVED_PC
-#define FRAME_SAVED_PC(FRAME) \
-  (kernel_debugging ? fbsd_kern_frame_saved_pc(FRAME) : \
-		      alpha_saved_pc_after_call(FRAME))
- 
-#endif /* FBSD_KGDB_ALPHA_H */
diff --git a/gnu/usr.bin/binutils/gdb/fbsd-kgdb-amd64.h b/gnu/usr.bin/binutils/gdb/fbsd-kgdb-amd64.h
deleted file mode 100644
index ee62200..0000000
--- a/gnu/usr.bin/binutils/gdb/fbsd-kgdb-amd64.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* $FreeBSD$ */
-
-#ifndef FBSD_KGDB_AMD64_H
-#define FBSD_KGDB_AMD64_H
-
-#include "fbsd-kgdb.h"
-
-#endif /* FBSD_KGDB_AMD64_H */
diff --git a/gnu/usr.bin/binutils/gdb/fbsd-kgdb-arm.h b/gnu/usr.bin/binutils/gdb/fbsd-kgdb-arm.h
deleted file mode 100644
index 5896125..0000000
--- a/gnu/usr.bin/binutils/gdb/fbsd-kgdb-arm.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* $FreeBSD$ */
-
-#ifndef FBSD_KGDB_ARM_H
-#define FBSD_KGDB_ARM_H
-
-#include "fbsd-kgdb.h"
-
-#endif /* FBSD_KGDB_ARM_H */
diff --git a/gnu/usr.bin/binutils/gdb/fbsd-kgdb-i386.h b/gnu/usr.bin/binutils/gdb/fbsd-kgdb-i386.h
deleted file mode 100644
index 3196316..0000000
--- a/gnu/usr.bin/binutils/gdb/fbsd-kgdb-i386.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* $FreeBSD$ */
-
-#ifndef FBSD_KGDB_I386_H
-#define FBSD_KGDB_I386_H
-
-#include "i386/tm-fbsd.h"
-#include "fbsd-kgdb.h"
-
-/* Override FRAME_SAVED_PC to enable the recognition of signal handlers.  */
-#undef  FRAME_SAVED_PC
-#define FRAME_SAVED_PC(FRAME) \
-  (kernel_debugging \
-    ? fbsd_kern_frame_saved_pc (FRAME) \
-    : i386bsd_frame_saved_pc (FRAME))
-extern CORE_ADDR fbsd_kern_frame_saved_pc(struct frame_info *fr);
-
-/* Offset to saved PC in sigcontext, from <sys/signal.h>.  */
-/* DEO:XXX where is this really from??? */
-#define SIGCONTEXT_PC_OFFSET 20
-
-#endif /* FBSD_KGDB_I386_H */
diff --git a/gnu/usr.bin/binutils/gdb/fbsd-kgdb-ia64.h b/gnu/usr.bin/binutils/gdb/fbsd-kgdb-ia64.h
deleted file mode 100644
index 8f198fd..0000000
--- a/gnu/usr.bin/binutils/gdb/fbsd-kgdb-ia64.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* $FreeBSD$ */
-
-#ifndef FBSD_KGDB_IA64_H
-#define FBSD_KGDB_IA64_H
-
-#include "fbsd-kgdb.h"
-
-#endif /* FBSD_KGDB_IA64_H */
diff --git a/gnu/usr.bin/binutils/gdb/fbsd-kgdb-powerpc.h b/gnu/usr.bin/binutils/gdb/fbsd-kgdb-powerpc.h
deleted file mode 100644
index c6821e1..0000000
--- a/gnu/usr.bin/binutils/gdb/fbsd-kgdb-powerpc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* $FreeBSD$ */
-
-#ifndef FBSD_KGDB_POWERPC_H
-#define FBSD_KGDB_POWERPC_H
-
-#include "fbsd-kgdb.h"
-
-#endif /* FBSD_KGDB_POWERPC_H */
diff --git a/gnu/usr.bin/binutils/gdb/fbsd-kgdb-sparc64.h b/gnu/usr.bin/binutils/gdb/fbsd-kgdb-sparc64.h
deleted file mode 100644
index 56fd480..0000000
--- a/gnu/usr.bin/binutils/gdb/fbsd-kgdb-sparc64.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* $FreeBSD$ */
-
-#ifndef FBSD_KGDB_SPARC64_H
-#define FBSD_KGDB_SPARC64_H
-
-#include "sparc/tm-fbsd.h"
-#include "fbsd-kgdb.h"
-
-#endif /* FBSD_KGDB_SPARC64_H */
diff --git a/gnu/usr.bin/binutils/gdb/fbsd-kgdb.h b/gnu/usr.bin/binutils/gdb/fbsd-kgdb.h
deleted file mode 100644
index e774436..0000000
--- a/gnu/usr.bin/binutils/gdb/fbsd-kgdb.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* Native-kernel debugging definitions for FreeBSD.
- * $FreeBSD$ 
- */
-
-#ifndef FBSD_KGDB_H
-#define FBSD_KGDB_H
-
-extern int kernel_debugging;
-extern int kernel_writablecore;
-extern struct target_so_ops kgdb_so_ops;
-
-#define ADDITIONAL_OPTIONS \
-       {"kernel", no_argument, &kernel_debugging, 1}, \
-       {"k", no_argument, &kernel_debugging, 1}, \
-       {"wcore", no_argument, &kernel_writablecore, 1}, \
-       {"w", no_argument, &kernel_writablecore, 1},
-
-#define ADDITIONAL_OPTION_HELP \
-       "\
-  --kernel           Enable kernel debugging.\n\
-  --wcore            Make core file writable (only works for /dev/mem).\n\
-                     This option only works while debugging a kernel !!\n\
-"
-
-#define DEFAULT_PROMPT kernel_debugging?"(kgdb) ":"(gdb) "
-
-/* misuse START_PROGRESS to test whether we're running as kgdb */   
-/* START_PROGRESS is called at the top of main */
-#undef START_PROGRESS
-#define START_PROGRESS(STR,N) \
-  if (!strcmp (STR, "kgdb")) \
-     kernel_debugging = 1;
-
-#endif /* FBSD_KGDB_H */
diff --git a/gnu/usr.bin/binutils/gdb/freebsd-uthread.c b/gnu/usr.bin/binutils/gdb/freebsd-uthread.c
deleted file mode 100644
index 0974c3e..0000000
--- a/gnu/usr.bin/binutils/gdb/freebsd-uthread.c
+++ /dev/null
@@ -1,889 +0,0 @@
-/* Low level interface for debugging FreeBSD user threads for GDB, the GNU debugger.
-   Copyright 1996, 1999 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* $FreeBSD$ */
-
-/* This module implements a sort of half target that sits between the
-   machine-independent parts of GDB and the ptrace interface (infptrace.c) to
-   provide access to the FreeBSD user-mode thread implementation.
-
-   FreeBSD threads are true user-mode threads, which are invoked via
-   the pthread_* interfaces.  These are mostly implemented in
-   user-space, with all thread context kept in various structures that
-   live in the user's heap.  For the most part, the kernel has no
-   knowlege of these threads.
-
-   Based largely on hpux-thread.c
-
-   */
-
-
-#include "defs.h"
-#include <sys/queue.h>
-#include <signal.h>
-#include <setjmp.h>
-#include "gdbthread.h"
-#include "target.h"
-#include "inferior.h"
-#include <fcntl.h>
-#include <ucontext.h>
-#include <unistd.h>
-#include <sys/stat.h>
-#include "gdbcore.h"
-
-extern int child_suppress_run;
-extern struct target_ops child_ops; /* target vector for inftarg.c */
-
-extern void _initialize_freebsd_uthread PARAMS ((void));
-
-/* Set to true while we are part-way through attaching */
-static int freebsd_uthread_attaching;
-
-static int freebsd_uthread_active = 0;
-static CORE_ADDR P_thread_list;
-static CORE_ADDR P_thread_run;
-
-/* Pointer to the next function on the objfile event chain.  */
-static void (*target_new_objfile_chain) (struct objfile *objfile);
-
-static void freebsd_uthread_resume PARAMS ((ptid_t pid, int step,
-					enum target_signal signo));
-
-static void init_freebsd_uthread_ops PARAMS ((void));
-
-static struct target_ops freebsd_uthread_ops;
-
-static ptid_t find_active_ptid PARAMS ((void));
-
-struct cached_pthread {
-  u_int64_t		uniqueid;
-  int			state;
-  CORE_ADDR		name;
-  union {
-    ucontext_t	uc;
-    jmp_buf	jb;
-  }			ctx;
-};
-
-static ptid_t cached_ptid;
-static struct cached_pthread cached_pthread;
-static CORE_ADDR cached_pthread_addr;
-
-LIST_HEAD(idmaplist, idmap);
-
-struct idmap {
-    LIST_ENTRY(idmap)	link;
-    u_int64_t		uniqueid;
-    int			tid;
-};
-
-#define MAPHASH_SIZE	257
-#define TID_MIN		1
-#define TID_MAX		16383
-
-static int tid_to_hash[TID_MAX + 1];		/* set to map_hash index */
-static struct idmaplist map_hash[MAPHASH_SIZE];
-static int next_free_tid = TID_MIN;		/* first available tid */
-static int last_free_tid = TID_MIN;		/* first unavailable */
-
-static CORE_ADDR P_thread_next_offset;
-static CORE_ADDR P_thread_uniqueid_offset;
-static CORE_ADDR P_thread_state_offset;
-static CORE_ADDR P_thread_name_offset;
-static CORE_ADDR P_thread_ctx_offset;
-static CORE_ADDR P_thread_PS_RUNNING_value;
-static CORE_ADDR P_thread_PS_DEAD_value;
-
-static int next_offset;
-static int uniqueid_offset;
-static int state_offset;
-static int name_offset;
-static int ctx_offset;
-static int PS_RUNNING_value;
-static int PS_DEAD_value;
-
-#define UNIQUEID_HASH(id)	(id % MAPHASH_SIZE)
-#define TID_ADD1(tid)		(((tid) + 1) == TID_MAX + 1 \
-				 ? TID_MIN : (tid) + 1)
-#define IS_TID_FREE(tid)	(tid_to_hash[tid] == -1)
-
-static int
-get_new_tid(int h)
-{
-  int tid = next_free_tid;
-
-  tid_to_hash[tid] = h;
-  next_free_tid = TID_ADD1(next_free_tid);
-  if (next_free_tid == last_free_tid)
-    {
-      int i;
-
-      for (i = last_free_tid; TID_ADD1(i) != last_free_tid; i = TID_ADD1(i))
-	if (IS_TID_FREE(i))
-	  break;
-      if (TID_ADD1(i) == last_free_tid)
-	{
-	  error("too many threads");
-	  return 0;
-	}
-      next_free_tid = i;
-      for (i = TID_ADD1(i); IS_TID_FREE(i); i = TID_ADD1(i))
-	;
-      last_free_tid = i;
-    }
-
-  return tid;
-}
-
-static ptid_t
-find_ptid(u_int64_t uniqueid)
-{
-  int h = UNIQUEID_HASH(uniqueid);
-  struct idmap *im;
-
-  LIST_FOREACH(im, &map_hash[h], link)
-    if (im->uniqueid == uniqueid)
-      return MERGEPID(PIDGET(inferior_ptid), im->tid);
-
-  im = xmalloc(sizeof(struct idmap));
-  im->uniqueid = uniqueid;
-  im->tid = get_new_tid(h);
-  LIST_INSERT_HEAD(&map_hash[h], im, link);
-
-  return MERGEPID(PIDGET(inferior_ptid), im->tid);
-}
-
-static void
-free_ptid(ptid_t ptid)
-{
-  int tid = TIDGET(ptid);
-  int h = tid_to_hash[tid];
-  struct idmap *im;
-
-  if (!tid) return;
-
-  LIST_FOREACH(im, &map_hash[h], link)
-    if (im->tid == tid)
-      break;
-
-  if (!im) return;
-
-  LIST_REMOVE(im, link);
-  tid_to_hash[tid] = -1;
-  free(im);
-}
-
-#define READ_OFFSET(field) read_memory(P_thread_##field##_offset,	\
-				       (char *) &field##_offset,	\
-				       sizeof(field##_offset))
-
-#define READ_VALUE(name) read_memory(P_thread_##name##_value,	\
-				     (char *) &name##_value,	\
-				     sizeof(name##_value))
-
-static void
-read_thread_offsets (void)
-{
-  READ_OFFSET(next);
-  READ_OFFSET(uniqueid);
-  READ_OFFSET(state);
-  READ_OFFSET(name);
-  READ_OFFSET(ctx);
-
-  READ_VALUE(PS_RUNNING);
-  READ_VALUE(PS_DEAD);
-}
-
-#define READ_FIELD(ptr, T, field, result) \
-  read_memory ((ptr) + field##_offset, (char *) &(result), sizeof result)
-
-static u_int64_t
-read_pthread_uniqueid (CORE_ADDR ptr)
-{
-  u_int64_t uniqueid;
-  READ_FIELD(ptr, u_int64_t, uniqueid, uniqueid);
-  return uniqueid;
-}
-
-static CORE_ADDR
-read_pthread_next (CORE_ADDR ptr)
-{
-  CORE_ADDR next;
-  READ_FIELD(ptr, CORE_ADDR, next, next);
-  return next;
-}
-
-static void
-read_cached_pthread (CORE_ADDR ptr, struct cached_pthread *cache)
-{
-  READ_FIELD(ptr, u_int64_t,	uniqueid,	cache->uniqueid);
-  READ_FIELD(ptr, int,		state,		cache->state);
-  READ_FIELD(ptr, CORE_ADDR,	name,		cache->name);
-  READ_FIELD(ptr, ucontext_t,	ctx,		cache->ctx);
-}
-
-static ptid_t
-find_active_ptid (void)
-{
-  CORE_ADDR ptr;
-
-  read_memory ((CORE_ADDR)P_thread_run,
-	       (char *)&ptr,
-	       sizeof ptr);
-
-  return find_ptid(read_pthread_uniqueid(ptr));
-}
-
-static CORE_ADDR find_pthread_addr PARAMS ((ptid_t ptid));
-static struct cached_pthread * find_pthread PARAMS ((ptid_t ptid));
-
-static CORE_ADDR
-find_pthread_addr (ptid_t ptid)
-{
-  CORE_ADDR ptr;
-
-  if (ptid_equal(ptid, cached_ptid))
-    return cached_pthread_addr;
-
-  read_memory ((CORE_ADDR)P_thread_list,
-	       (char *)&ptr,
-	       sizeof ptr);
-
-  while (ptr != 0)
-    {
-      if (ptid_equal(find_ptid(read_pthread_uniqueid(ptr)), ptid))
-	{
-	  cached_ptid = ptid;
-	  cached_pthread_addr = ptr;
-	  read_cached_pthread(ptr, &cached_pthread);
-	  return ptr;
-	}
-      ptr = read_pthread_next(ptr);
-    }
-
-  return NULL;
-}
-
-static struct cached_pthread *
-find_pthread (ptid_t ptid)
-{
-  CORE_ADDR ptr;
-
-  if (ptid_equal(ptid, cached_ptid))
-    return &cached_pthread;
-
-  read_memory ((CORE_ADDR)P_thread_list,
-	       (char *)&ptr,
-	       sizeof ptr);
-
-  while (ptr != 0)
-    {
-      if (ptid_equal(find_ptid(read_pthread_uniqueid(ptr)), ptid))
-	{
-	  cached_ptid = ptid;
-	  cached_pthread_addr = ptr;
-	  read_cached_pthread(ptr, &cached_pthread);
-	  return &cached_pthread;
-	}
-      ptr = read_pthread_next(ptr);
-    }
-
-#if 0
-  error ("Can't find pthread %d,%d", PIDGET(ptid), TIDGET(ptid));
-#endif
-  return NULL;
-}
-
-
-/* Most target vector functions from here on actually just pass through to
-   inftarg.c, as they don't need to do anything specific for threads.  */
-
-/* ARGSUSED */
-static void
-freebsd_uthread_open (char *arg, int from_tty)
-{
-  child_ops.to_open (arg, from_tty);
-}
-
-/* Attach to process PID, then initialize for debugging it
-   and wait for the trace-trap that results from attaching.  */
-
-static void
-freebsd_uthread_attach (char *args, int from_tty)
-{
-  child_ops.to_attach (args, from_tty);
-  push_target (&freebsd_uthread_ops);
-  freebsd_uthread_attaching = 1;
-}
-
-/* After an attach, see if the target is threaded */
-
-static void
-freebsd_uthread_post_attach (int pid)
-{
-  if (freebsd_uthread_active)
-    {
-      read_thread_offsets ();
-      inferior_ptid = find_active_ptid ();
-      add_thread (inferior_ptid);
-    }
-  else
-    {
-      unpush_target (&freebsd_uthread_ops);
-      push_target (&child_ops);
-    }
-
-  freebsd_uthread_attaching = 0;
-}
-
-/* Take a program previously attached to and detaches it.
-   The program resumes execution and will no longer stop
-   on signals, etc.  We'd better not have left any breakpoints
-   in the program or it'll die when it hits one.  For this
-   to work, it may be necessary for the process to have been
-   previously attached.  It *might* work if the program was
-   started via the normal ptrace (PTRACE_TRACEME).  */
-
-static void
-freebsd_uthread_detach (char *args, int from_tty)
-{
-  child_ops.to_detach (args, from_tty);
-}
-
-/* Resume execution of process PID.  If STEP is nozero, then
-   just single step it.  If SIGNAL is nonzero, restart it with that
-   signal activated.  We may have to convert pid from a thread-id to an LWP id
-   for procfs.  */
-
-static void
-freebsd_uthread_resume (ptid_t ptid, int step, enum target_signal signo)
-{
-  if (freebsd_uthread_attaching)
-    {
-      child_ops.to_resume (ptid, step, signo);
-      return;
-    }
-
-  child_ops.to_resume (ptid, step, signo);
-  cached_ptid = MERGEPID(0, 0);
-}
-
-/* Wait for any threads to stop.  We may have to convert PID from a thread id
-   to a LWP id, and vice versa on the way out.  */
-
-static ptid_t
-freebsd_uthread_wait (ptid_t ptid, struct target_waitstatus *ourstatus)
-{
-  ptid_t rtnval;
-
-  if (freebsd_uthread_attaching)
-    {
-      return child_ops.to_wait (ptid, ourstatus);
-    }
-
-  rtnval = child_ops.to_wait (ptid, ourstatus);
-
-  if (PIDGET(rtnval) >= 0)
-    {
-      rtnval = find_active_ptid ();
-      if (!in_thread_list (rtnval))
-	add_thread (rtnval);
-    }
-
-  return rtnval;
-}
-
-/* XXX: this needs to be selected by target, not [build] host */
-#ifdef __i386__
-
-static char jmpmap[MAX_NUM_REGS] = /* map reg to jmp_buf */
-{
-  6,				/* eax */
-  -1,				/* ecx */
-  -1,				/* edx */
-  1,				/* ebx */
-  2,				/* esp */
-  3,				/* ebp */
-  4,				/* esi */
-  5,				/* edi */
-  0,				/* eip */
-  -1,				/* eflags */
-  -1,				/* cs */
-  -1,				/* ss */
-  -1,				/* ds */
-  -1,				/* es */
-  -1,				/* fs */
-  -1,				/* gs */
-  -1, -1, -1, -1, -1, -1, -1,	/* st0-st7 */
-  -1, -1, -1, -1, -1, -1, -1,	/* fctrl-fop */
-  -1, -1, -1, -1, -1, -1, -1,	/* xmm0-xmm7 */
-  -1,				/* mxcsr */
-};
-
-#endif
-
-#ifdef __alpha__
-
-static char jmpmap[NUM_REGS] = {
-  4,  5,  6,  7,  8,  9,  10, 11, /* v0 - t6 */
-  12, 13, 14, 15, 16, 17, 18, 19, /* t7 - fp */
-  20, 21, 22, 23, 24, 25, 26, 27, /* a0 - t9 */
-  28, 29, 30, 31, 32, 33, 34, 35, /* t10 - zero */
-  37, 38, 39, 40, 41, 42, 43, 44, /* f0 - f7 */
-  45, 46, 47, 48, 49, 50, 51, 52, /* f8 - f15 */
-  53, 54, 55, 56, 57, 58, 59, 60, /* f16 - f23 */
-  61, 62, 63, 64, 65, 66, 67, 68, /* f24 - f31 */
-  2,  -1,			  /* pc, vfp */
-};
-
-#endif
-
-#ifdef __sparc64__
-
-static char jmpmap[125] = {
-  -1
-};
-
-#endif
-
-static void
-freebsd_uthread_fetch_registers (int regno)
-{
-  struct cached_pthread *thread;
-  int active;
-  int first_regno, last_regno;
-  register_t *regbase;
-  char *regmap;
-
-  if (freebsd_uthread_attaching || TIDGET(inferior_ptid) == 0)
-    {
-      child_ops.to_fetch_registers (regno);
-      return;
-    }
-
-  thread = find_pthread (inferior_ptid);
-  active = (ptid_equal(inferior_ptid, find_active_ptid()));
-
-  if (active)
-    {
-      child_ops.to_fetch_registers (regno);
-      return;
-    }
-
-  if (regno == -1)
-    {
-      first_regno = 0;
-      last_regno = NUM_REGS - 1;
-    }
-  else
-    {
-      first_regno = regno;
-      last_regno = regno;
-    }
-
-  regbase = (register_t*) &thread->ctx.jb[0];
-  regmap = jmpmap;
-
-  for (regno = first_regno; regno <= last_regno; regno++)
-    {
-      if (regmap[regno] == -1)
-	child_ops.to_fetch_registers (regno);
-      else
-	if (thread)
-	  supply_register (regno, (char*) &regbase[regmap[regno]]);
-	else
-	  supply_register (regno, NULL);
-    }
-}
-
-static void
-freebsd_uthread_store_registers (int regno)
-{
-  struct cached_pthread *thread;
-  CORE_ADDR ptr;
-  int first_regno, last_regno;
-  u_int32_t *regbase;
-  char *regmap;
-
-  if (freebsd_uthread_attaching)
-    {
-      child_ops.to_store_registers (regno);
-      return;
-    }
-
-  thread = find_pthread (inferior_ptid);
-
-  if (thread->state == PS_RUNNING_value)
-    {
-      child_ops.to_store_registers (regno);
-      return;
-    }
-
-  if (regno == -1)
-    {
-      first_regno = 0;
-      last_regno = NUM_REGS - 1;
-    }
-  else
-    {
-      first_regno = regno;
-      last_regno = regno;
-    }
-
-  regbase = (u_int32_t*) &thread->ctx.jb[0];
-  regmap = jmpmap;
-
-  ptr = find_pthread_addr (inferior_ptid);
-  for (regno = first_regno; regno <= last_regno; regno++)
-    {
-      if (regmap[regno] == -1)
-	child_ops.to_store_registers (regno);
-      else
-	{
-	  u_int32_t *reg = &regbase[regmap[regno]];
-	  int off;
-
-	  /* Hang onto cached value */
-	  memcpy(reg, registers + REGISTER_BYTE (regno),
-		 REGISTER_RAW_SIZE (regno));
-
-	  /* And push out to inferior */
-	  off = (char *) reg - (char *) thread;
-	  write_memory (ptr + off, 
-			registers + REGISTER_BYTE (regno),
-			REGISTER_RAW_SIZE (regno));
-	}
-    }
-}
-
-/* Get ready to modify the registers array.  On machines which store
-   individual registers, this doesn't need to do anything.  On machines
-   which store all the registers in one fell swoop, this makes sure
-   that registers contains all the registers from the program being
-   debugged.  */
-
-static void
-freebsd_uthread_prepare_to_store (void)
-{
-  child_ops.to_prepare_to_store ();
-}
-
-static int
-freebsd_uthread_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len,
-			     int dowrite, struct mem_attrib *attrib,
-			     struct target_ops *target)
-{
-  return child_ops.to_xfer_memory (memaddr, myaddr, len, dowrite,
-				   attrib, target);
-}
-
-/* Print status information about what we're accessing.  */
-
-static void
-freebsd_uthread_files_info (struct target_ops *ignore)
-{
-  child_ops.to_files_info (ignore);
-}
-
-static void
-freebsd_uthread_kill_inferior (void)
-{
-  child_ops.to_kill ();
-}
-
-static void
-freebsd_uthread_notice_signals (ptid_t ptid)
-{
-  child_ops.to_notice_signals (ptid);
-}
-
-/* Fork an inferior process, and start debugging it with /proc.  */
-
-static void
-freebsd_uthread_create_inferior (char *exec_file, char *allargs, char **env)
-{
-  child_ops.to_create_inferior (exec_file, allargs, env);
-
-  if (PIDGET(inferior_ptid) && freebsd_uthread_active)
-    {
-      read_thread_offsets ();
-      push_target (&freebsd_uthread_ops);
-      inferior_ptid = find_active_ptid ();
-      add_thread (inferior_ptid);
-    }
-}
-
-/* This routine is called to find out if the inferior is using threads.
-   We check for the _thread_run and _thread_list globals. */
-
-void
-freebsd_uthread_new_objfile (struct objfile *objfile)
-{
-  struct minimal_symbol *ms;
-
-  if (!objfile)
-    {
-      freebsd_uthread_active = 0;
-      return;
-    }
-
-  ms = lookup_minimal_symbol ("_thread_run", NULL, objfile);
-
-  if (!ms)
-    return;
-
-  P_thread_run = SYMBOL_VALUE_ADDRESS (ms);
-
-  ms = lookup_minimal_symbol ("_thread_list", NULL, objfile);
-
-  if (!ms)
-    return;
-
-  P_thread_list = SYMBOL_VALUE_ADDRESS (ms);
-
-#define OFFSET_SYM(field)	"_thread_" #field "_offset"
-#define LOOKUP_OFFSET(field)						\
-  do {									\
-      ms = lookup_minimal_symbol (OFFSET_SYM(field), NULL, objfile);	\
-      if (!ms)								\
-	return;								\
-      P_thread_##field##_offset = SYMBOL_VALUE_ADDRESS (ms);		\
-  } while (0);
-
-#define VALUE_SYM(name)		"_thread_" #name "_value"
-#define LOOKUP_VALUE(name)						\
-  do {									\
-       ms = lookup_minimal_symbol (VALUE_SYM(name), NULL, objfile);	\
-      if (!ms)								\
-	return;								\
-      P_thread_##name##_value = SYMBOL_VALUE_ADDRESS (ms);		\
-  } while (0);
-
-  LOOKUP_OFFSET(next);
-  LOOKUP_OFFSET(uniqueid);
-  LOOKUP_OFFSET(state);
-  LOOKUP_OFFSET(name);
-  LOOKUP_OFFSET(ctx);
-
-  LOOKUP_VALUE(PS_RUNNING);
-  LOOKUP_VALUE(PS_DEAD);
-
-  freebsd_uthread_active = 1;
-}
-
-/* Clean up after the inferior dies.  */
-
-static void
-freebsd_uthread_mourn_inferior ()
-{
-  child_ops.to_mourn_inferior ();
-  unpush_target (&freebsd_uthread_ops);
-}
-
-/* Mark our target-struct as eligible for stray "run" and "attach" commands.  */
-
-static int
-freebsd_uthread_can_run ()
-{
-  return child_suppress_run;
-}
-
-static int
-freebsd_uthread_thread_alive (ptid_t ptid)
-{
-  struct cached_pthread *thread;
-  int ret = 0;
-
-  if (freebsd_uthread_attaching)
-    return 1;
-
-  /*
-   * We can get called from child_ops.to_wait() which passes the underlying
-   * pid (without a thread number).
-   */
-  if (TIDGET(ptid) == 0)
-    return 1;
-
-  if (find_pthread_addr (ptid) != 0)
-    {
-      thread = find_pthread (ptid);
-      ret = (thread->state != PS_DEAD_value);
-    }
-
-  if (!ret)
-    free_ptid(ptid);
-
-  return ret;
-}
-
-static void
-freebsd_uthread_stop (void)
-{
-  child_ops.to_stop ();
-}
-
-static void
-freebsd_uthread_find_new_threads (void)
-{
-  CORE_ADDR ptr;
-  int state;
-  u_int64_t uniqueid;
-
-  read_memory ((CORE_ADDR)P_thread_list,
-	       (char *)&ptr,
-	       sizeof ptr);
-
-  while (ptr != 0)
-    {
-      READ_FIELD(ptr, int, state, state);
-      READ_FIELD(ptr, u_int64_t, uniqueid, uniqueid);
-      if (state != PS_DEAD_value &&
-	  !in_thread_list (find_ptid(uniqueid)))
-	add_thread (find_ptid(uniqueid));
-      ptr = read_pthread_next(ptr);
-    }
-}
-
-/* MUST MATCH enum pthread_state */
-static const char *statenames[] = {
-  "RUNNING",
-  "SIGTHREAD",
-  "MUTEX_WAIT",
-  "COND_WAIT",
-  "FDLR_WAIT",
-  "FDLW_WAIT",
-  "FDR_WAIT",
-  "FDW_WAIT",
-  "POLL_WAIT",
-  "FILE_WAIT",
-  "SELECT_WAIT",
-  "SLEEP_WAIT",
-  "WAIT_WAIT",
-  "SIGSUSPEND",
-  "SIGWAIT",
-  "SPINBLOCK",
-  "JOIN",
-  "SUSPENDED",
-  "DEAD",
-  "DEADLOCK",
-};
-
-#if 0
-
-static int
-freebsd_uthread_get_thread_info (ref, selection, info)
-     gdb_threadref *ref;
-     int selection;
-     struct gdb_ext_thread_info *info;
-{
-  int pid = *ref;
-  struct cached_pthread *thread = find_pthread (pid);
-  struct cleanup *old_chain;
-
-  old_chain = save_inferior_pid ();
-  inferior_pid = main_pid;
-
-  memset(&info->threadid, 0, OPAQUETHREADBYTES);
-
-  memcpy(&info->threadid, ref, sizeof *ref);
-  info->active = thread->state == PS_RUNNING_value;
-  strcpy(info->display, statenames[thread->state]);
-  if (thread->name)
-    read_memory ((CORE_ADDR) thread->name, info->shortname, 32);
-  else
-    strcpy(info->shortname, "");
-
-  do_cleanups (old_chain);
-  return (0);
-}
-
-#endif
-
-char *
-freebsd_uthread_pid_to_str (ptid_t ptid)
-{
-  static char buf[30];
-
-  if (STREQ (current_target.to_shortname, "freebsd-uthreads"))
-    sprintf (buf, "Process %d, Thread %ld",
-	     PIDGET(ptid), TIDGET(ptid));
-  else
-    sprintf (buf, "Process %d", PIDGET(ptid));
-
-  return buf;
-}
-
-
-static void
-init_freebsd_uthread_ops ()
-{
-  freebsd_uthread_ops.to_shortname = "freebsd-uthreads";
-  freebsd_uthread_ops.to_longname = "FreeBSD uthreads";
-  freebsd_uthread_ops.to_doc = "FreeBSD user threads support.";
-  freebsd_uthread_ops.to_open = freebsd_uthread_open;
-  freebsd_uthread_ops.to_attach = freebsd_uthread_attach;
-  freebsd_uthread_ops.to_post_attach = freebsd_uthread_post_attach;
-  freebsd_uthread_ops.to_detach = freebsd_uthread_detach;
-  freebsd_uthread_ops.to_resume = freebsd_uthread_resume;
-  freebsd_uthread_ops.to_wait = freebsd_uthread_wait;
-  freebsd_uthread_ops.to_fetch_registers = freebsd_uthread_fetch_registers;
-  freebsd_uthread_ops.to_store_registers = freebsd_uthread_store_registers;
-  freebsd_uthread_ops.to_prepare_to_store = freebsd_uthread_prepare_to_store;
-  freebsd_uthread_ops.to_xfer_memory = freebsd_uthread_xfer_memory;
-  freebsd_uthread_ops.to_files_info = freebsd_uthread_files_info;
-  freebsd_uthread_ops.to_insert_breakpoint = memory_insert_breakpoint;
-  freebsd_uthread_ops.to_remove_breakpoint = memory_remove_breakpoint;
-  freebsd_uthread_ops.to_terminal_init = terminal_init_inferior;
-  freebsd_uthread_ops.to_terminal_inferior = terminal_inferior;
-  freebsd_uthread_ops.to_terminal_ours_for_output = terminal_ours_for_output;
-  freebsd_uthread_ops.to_terminal_ours = terminal_ours;
-  freebsd_uthread_ops.to_terminal_info = child_terminal_info;
-  freebsd_uthread_ops.to_kill = freebsd_uthread_kill_inferior;
-  freebsd_uthread_ops.to_create_inferior = freebsd_uthread_create_inferior;
-  freebsd_uthread_ops.to_mourn_inferior = freebsd_uthread_mourn_inferior;
-  freebsd_uthread_ops.to_can_run = freebsd_uthread_can_run;
-  freebsd_uthread_ops.to_notice_signals = freebsd_uthread_notice_signals;
-  freebsd_uthread_ops.to_thread_alive = freebsd_uthread_thread_alive;
-  freebsd_uthread_ops.to_stop = freebsd_uthread_stop;
-  freebsd_uthread_ops.to_stratum = process_stratum;
-  freebsd_uthread_ops.to_has_all_memory = 1;
-  freebsd_uthread_ops.to_has_memory = 1;
-  freebsd_uthread_ops.to_has_stack = 1;
-  freebsd_uthread_ops.to_has_registers = 1;
-  freebsd_uthread_ops.to_has_execution = 1;
-  freebsd_uthread_ops.to_has_thread_control = 0;
-  freebsd_uthread_ops.to_magic = OPS_MAGIC;
-  freebsd_uthread_ops.to_find_new_threads = freebsd_uthread_find_new_threads;
-  freebsd_uthread_ops.to_pid_to_str = freebsd_uthread_pid_to_str;
-#if 0
-  freebsd_uthread_vec.get_thread_info = freebsd_uthread_get_thread_info;
-#endif
-}
-
-void
-_initialize_freebsd_uthread ()
-{
-  init_freebsd_uthread_ops ();
-  add_target (&freebsd_uthread_ops);
-
-  target_new_objfile_chain = target_new_objfile_hook;
-  target_new_objfile_hook = freebsd_uthread_new_objfile;
-
-  child_suppress_run = 1;
-}
diff --git a/gnu/usr.bin/binutils/gdb/gdb.1 b/gnu/usr.bin/binutils/gdb/gdb.1
deleted file mode 100644
index b6cd3cc..0000000
--- a/gnu/usr.bin/binutils/gdb/gdb.1
+++ /dev/null
@@ -1,385 +0,0 @@
-.\" Copyright (c) 1991 Free Software Foundation
-.\" See section COPYING for conditions for redistribution
-.\" $FreeBSD$
-.TH gdb 1 "4nov1991" "GNU Tools" "GNU Tools"
-.SH NAME
-gdb \- The GNU Debugger
-.SH SYNOPSIS
-.na
-.TP
-.B gdb
-.RB "[\|" \-help "\|]"
-.RB "[\|" \-nx "\|]"
-.RB "[\|" \-q "\|]"
-.RB "[\|" \-batch "\|]"
-.RB "[\|" \-cd=\c
-.I dir\c
-\|]
-.RB "[\|" \-f "\|]"
-.RB "[\|" \-k "\|]"
-.RB "[\|" \-wcore "\|]"
-.RB "[\|" "\-b\ "\c
-.IR bps "\|]"
-.RB "[\|" "\-tty="\c
-.IR dev "\|]"
-.RB "[\|" "\-s "\c
-.I symfile\c
-\&\|]
-.RB "[\|" "\-e "\c
-.I prog\c
-\&\|]  
-.RB "[\|" "\-se "\c
-.I prog\c
-\&\|]
-.RB "[\|" "\-c "\c
-.I core\c
-\&\|]
-.RB "[\|" "\-x "\c
-.I cmds\c
-\&\|]
-.RB "[\|" "\-d "\c
-.I dir\c
-\&\|]
-.RB "[\|" \c
-.I prog\c
-.RB "[\|" \c
-.IR core \||\| procID\c
-\&\|]\&\|]
-.ad b
-.SH DESCRIPTION
-The purpose of a debugger such as GDB is to allow you to see what is
-going on ``inside'' another program while it executes\(em\&or what another
-program was doing at the moment it crashed.
-
-GDB can do four main kinds of things (plus other things in support of
-these) to help you catch bugs in the act:
-
-.TP
-\ \ \ \(bu
-Start your program, specifying anything that might affect its behavior.
-
-.TP
-\ \ \ \(bu
-Make your program stop on specified conditions.
-
-.TP
-\ \ \ \(bu
-Examine what has happened, when your program has stopped.
-
-.TP
-\ \ \ \(bu
-Change things in your program, so you can experiment with correcting the
-effects of one bug and go on to learn about another.
-.PP
-
-You can use GDB to debug programs written in C, C++, and Modula-2.
-Fortran support will be added when a GNU Fortran compiler is ready.
-
-GDB is invoked with the shell command \c
-.B gdb\c
-\&.  Once started, it reads
-commands from the terminal until you tell it to exit with the GDB
-command \c
-.B quit\c
-\&.  You can get online help from \c
-.B gdb\c
-\& itself
-by using the command \c
-.B help\c
-\&.
-
-You can run \c
-.B gdb\c
-\& with no arguments or options; but the most
-usual way to start GDB is with one argument or two, specifying an
-executable program as the argument:
-.sp
-.br
-gdb\ program
-.br
-.sp
-
-You can also start with both an executable program and a core file specified:
-.sp
-.br
-gdb\ program\ core
-.br
-.sp
-
-You can, instead, specify a process ID as a second argument, if you want
-to debug a running process:
-.sp
-.br
-gdb\ program\ 1234
-.br
-.sp
-
-would attach GDB to process \c
-.B 1234\c
-\& (unless you also have a file
-named `\|\c
-.B 1234\c
-\&\|'; GDB does check for a core file first).
-
-Here are some of the most frequently needed GDB commands:
-.TP
-.B break \fR[\|\fIfile\fB:\fR\|]\fIfunction
-\&
-Set a breakpoint at \c
-.I function\c
-\& (in \c
-.I file\c
-\&).
-.TP
-.B run \fR[\|\fIarglist\fR\|]
-Start your program (with \c
-.I arglist\c
-\&, if specified).
-.TP
-.B bt
-Backtrace: display the program stack.
-.TP
-.BI print " expr"\c
-\&
-Display the value of an expression.
-.TP
-.B c
-Continue running your program (after stopping, e.g. at a breakpoint).
-.TP
-.B next
-Execute next program line (after stopping); step \c
-.I over\c
-\& any
-function calls in the line.
-.TP
-.B step
-Execute next program line (after stopping); step \c
-.I into\c
-\& any
-function calls in the line.
-.TP
-.B help \fR[\|\fIname\fR\|]
-Show information about GDB command \c
-.I name\c
-\&, or general information
-about using GDB.
-.TP
-.B quit
-Exit from GDB.
-.PP
-For full details on GDB, see \c
-.I 
-Using GDB: A Guide to the GNU Source-Level Debugger\c
-\&, by Richard M. Stallman and Roland H. Pesch.  The same text is available online
-as the \c
-.B gdb\c
-\& entry in the \c
-.B info\c
-\& program.
-.SH OPTIONS
-Any arguments other than options specify an executable
-file and core file (or process ID); that is, the first argument
-encountered with no 
-associated option flag is equivalent to a `\|\c
-.B \-se\c
-\&\|' option, and the
-second, if any, is equivalent to a `\|\c
-.B \-c\c
-\&\|' option if it's the name of a file.  Many options have
-both long and short forms; both are shown here.  The long forms are also
-recognized if you truncate them, so long as enough of the option is
-present to be unambiguous.  (If you prefer, you can flag option
-arguments with `\|\c
-.B +\c
-\&\|' rather than `\|\c
-.B \-\c
-\&\|', though we illustrate the
-more usual convention.)
-
-All the options and command line arguments you give are processed
-in sequential order.  The order makes a difference when the
-`\|\c
-.B \-x\c
-\&\|' option is used.
-
-.TP
-.B \-help
-.TP
-.B \-h
-List all options, with brief explanations.
-
-.TP
-.BI "\-symbols=" "file"\c
-.TP
-.BI "\-s " "file"\c
-\&
-Read symbol table from file \c
-.I file\c
-\&.
-
-.TP
-.BI "\-exec=" "file"\c
-.TP
-.BI "\-e " "file"\c
-\&
-Use file \c
-.I file\c
-\& as the executable file to execute when
-appropriate, and for examining pure data in conjunction with a core
-dump.
-
-.TP
-.BI "\-se=" "file"\c
-\&
-Read symbol table from file \c
-.I file\c
-\& and use it as the executable
-file.
-
-.TP
-.BI "\-core=" "file"\c
-.TP
-.BI "\-c " "file"\c
-\&
-Use file \c
-.I file\c
-\& as a core dump to examine.
-
-.TP
-.BI "\-command=" "file"\c
-.TP
-.BI "\-x " "file"\c
-\&
-Execute GDB commands from file \c
-.I file\c
-\&.  
-
-.TP
-.BI "\-directory=" "directory"\c
-.TP
-.BI "\-d " "directory"\c
-\&
-Add \c
-.I directory\c
-\& to the path to search for source files.
-.PP
-
-.TP
-.B \-nx
-.TP
-.B \-n
-Do not execute commands from any `\|\c
-.B .gdbinit\c
-\&\|' initialization files.
-Normally, the commands in these files are executed after all the
-command options and arguments have been processed.
-
-
-.TP
-.B \-quiet
-.TP
-.B \-q
-``Quiet''.  Do not print the introductory and copyright messages.  These
-messages are also suppressed in batch mode.
-
-.TP
-.B \-batch
-Run in batch mode.  Exit with status \c
-.B 0\c
-\& after processing all the command
-files specified with `\|\c
-.B \-x\c
-\&\|' (and `\|\c
-.B .gdbinit\c
-\&\|', if not inhibited).
-Exit with nonzero status if an error occurs in executing the GDB
-commands in the command files.
-
-Batch mode may be useful for running GDB as a filter, for example to
-download and run a program on another computer; in order to make this
-more useful, the message
-.sp
-.br
-Program\ exited\ normally.
-.br
-.sp
-
-(which is ordinarily issued whenever a program running under GDB control
-terminates) is not issued when running in batch mode.
-
-.TP
-.BI "\-cd=" "directory"\c
-\&
-Run GDB using \c
-.I directory\c
-\& as its working directory,
-instead of the current directory.
-
-.TP
-.B \-fullname
-.TP
-.B \-f
-Emacs sets this option when it runs GDB as a subprocess.  It tells GDB
-to output the full file name and line number in a standard,
-recognizable fashion each time a stack frame is displayed (which
-includes each time the program stops).  This recognizable format looks
-like two `\|\c
-.B \032\c
-\&\|' characters, followed by the file name, line number
-and character position separated by colons, and a newline.  The
-Emacs-to-GDB interface program uses the two `\|\c
-.B \032\c
-\&\|' characters as
-a signal to display the source code for the frame.
-
-.TP
-.B \-kernel
-.TP
-.B \-k
-Use gdb in kernel debugging mode. The prompt is set to ``(kgdb)''.
-
-.TP
-.B \-wcore
-This option may only be used in kernel debugging mode while
-debugging a ``live'' kernel and makes the corefile (/dev/mem)
-writable.
-
-.TP
-.BI "\-b " "bps"\c
-\&
-Set the line speed (baud rate or bits per second) of any serial
-interface used by GDB for remote debugging.
-
-.TP
-.BI "\-tty=" "device"\c
-\&
-Run using \c
-.I device\c
-\& for your program's standard input and output.
-.PP
-
-.SH "SEE ALSO"
-.RB "`\|" gdb "\|'"
-entry in
-.B info\c
-\&;
-.I 
-Using GDB: A Guide to the GNU Source-Level Debugger\c
-, Richard M. Stallman and Roland H. Pesch, July 1991.
-.SH COPYING
-Copyright (c) 1991 Free Software Foundation, Inc.
-.PP
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-.PP
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-.PP
-Permission is granted to copy and distribute translations of this
-manual into another language, under the above conditions for modified
-versions, except that this permission notice may be included in
-translations approved by the Free Software Foundation instead of in
-the original English.
diff --git a/gnu/usr.bin/binutils/gdb/kvm-fbsd-alpha.h b/gnu/usr.bin/binutils/gdb/kvm-fbsd-alpha.h
deleted file mode 100644
index 11260ac..0000000
--- a/gnu/usr.bin/binutils/gdb/kvm-fbsd-alpha.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/* Kernel core dump functions below target vector, for GDB on FreeBSD/Alpha.
-   Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995
-   Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-*/
-
-__FBSDID("$FreeBSD$");
-
-#include "alpha/tm-alpha.h"
-
-#ifndef S0_REGNUM
-#define S0_REGNUM (T7_REGNUM+1)
-#endif
-
-static void
-fetch_kcore_registers (struct pcb *pcbp)
-{
-
-  /* First clear out any garbage.  */
-  memset (registers, '\0', REGISTER_BYTES);
-
-  /* SP */
-  *(long *) &registers[REGISTER_BYTE (SP_REGNUM)] =
-    pcbp->pcb_hw.apcb_ksp;
-
-  /* S0 through S6 */
-  memcpy (&registers[REGISTER_BYTE (S0_REGNUM)],
-          &pcbp->pcb_context[0], 7 * sizeof (long));
-
-  /* PC */
-  *(long *) &registers[REGISTER_BYTE (PC_REGNUM)] =
-    pcbp->pcb_context[7];
-
-  registers_fetched ();
-}
-
-CORE_ADDR
-fbsd_kern_frame_saved_pc (struct frame_info *fi)
-{
-  struct minimal_symbol *sym;
-  CORE_ADDR this_saved_pc;
-
-  this_saved_pc = alpha_frame_saved_pc (fi);
-
-  sym = lookup_minimal_symbol_by_pc (this_saved_pc);
-
-  if (sym != NULL &&
-      (strcmp (SYMBOL_NAME (sym), "XentArith") == 0 ||
-       strcmp (SYMBOL_NAME (sym), "XentIF") == 0 ||
-       strcmp (SYMBOL_NAME (sym), "XentInt") == 0 ||
-       strcmp (SYMBOL_NAME (sym), "XentMM") == 0 ||
-       strcmp (SYMBOL_NAME (sym), "XentSys") == 0 ||
-       strcmp (SYMBOL_NAME (sym), "XentUna") == 0 ||
-       strcmp (SYMBOL_NAME (sym), "XentRestart") == 0))
-    {
-      return (read_memory_integer (fi->frame + 32 * 8, 8));
-    }
-  else
-    {
-      return (this_saved_pc);
-    }
-}
diff --git a/gnu/usr.bin/binutils/gdb/kvm-fbsd-i386.h b/gnu/usr.bin/binutils/gdb/kvm-fbsd-i386.h
deleted file mode 100644
index b7e4a20..0000000
--- a/gnu/usr.bin/binutils/gdb/kvm-fbsd-i386.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* Kernel core dump functions below target vector, for GDB on FreeBSD/i386.
-   Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995
-   Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-*/
-
-__FBSDID("$FreeBSD$");
-
-#include <machine/frame.h>
-
-static CORE_ADDR
-ksym_maxuseraddr (void)
-{
-  static CORE_ADDR maxuseraddr;
-  struct minimal_symbol *sym;
-
-  if (maxuseraddr == 0)
-    {
-      sym = lookup_minimal_symbol ("PTmap", NULL, NULL);
-      if (sym == NULL) {
-	maxuseraddr = VM_MAXUSER_ADDRESS;
-      } else {
-	maxuseraddr = SYMBOL_VALUE_ADDRESS (sym);
-      }
-    }
-  return maxuseraddr;
-}
-
-
-/* Symbol names of kernel entry points.  Use special frames.  */
-#define	KSYM_TRAP	"calltrap"
-#define	KSYM_INTR	"Xintr"
-#define	KSYM_FASTINTR	"Xfastintr"
-#define	KSYM_OLDSYSCALL	"Xlcall_syscall"
-#define	KSYM_SYSCALL	"Xint0x80_syscall"
-
-/* The following is FreeBSD-specific hackery to decode special frames
-   and elide the assembly-language stub.  This could be made faster by
-   defining a frame_type field in the machine-dependent frame information,
-   but we don't think that's too important right now.  */
-enum frametype { tf_normal, tf_trap, tf_interrupt, tf_syscall };
-
-CORE_ADDR
-fbsd_kern_frame_saved_pc (struct frame_info *fi)
-{
-  struct minimal_symbol *sym;
-  CORE_ADDR this_saved_pc;
-  enum frametype frametype;
-
-  this_saved_pc = read_memory_integer (fi->frame + 4, 4);
-  sym = lookup_minimal_symbol_by_pc (this_saved_pc);
-  frametype = tf_normal;
-  if (sym != NULL)
-    {
-      if (strcmp (SYMBOL_NAME (sym), KSYM_TRAP) == 0)
-	frametype = tf_trap;
-      else
-	if (strncmp (SYMBOL_NAME (sym), KSYM_INTR,
-	    strlen (KSYM_INTR)) == 0 || strncmp (SYMBOL_NAME(sym),
-	    KSYM_FASTINTR, strlen (KSYM_FASTINTR)) == 0)
-	  frametype = tf_interrupt;
-      else
-	if (strcmp (SYMBOL_NAME (sym), KSYM_SYSCALL) == 0 ||
-	    strcmp (SYMBOL_NAME (sym), KSYM_OLDSYSCALL) == 0)
-	  frametype = tf_syscall;
-    }
-
-  switch (frametype)
-    {
-      case tf_normal:
-        return (this_saved_pc);
-#define oEIP   offsetof (struct trapframe, tf_eip)
-
-      case tf_trap:
-	return (read_memory_integer (fi->frame + 8 + oEIP, 4));
-
-      case tf_interrupt:
-	return (read_memory_integer (fi->frame + 12 + oEIP, 4));
-
-      case tf_syscall:
-	return (read_memory_integer (fi->frame + 8 + oEIP, 4));
-#undef oEIP
-    }
-}
-
-static void
-fetch_kcore_registers (struct pcb *pcb)
-{
-  int i;
-  int noreg;
-
-  /* Get the register values out of the sys pcb and store them where
-     `read_register' will find them.  */
-  /*
-   * XXX many registers aren't available.
-   * XXX for the non-core case, the registers are stale - they are for
-   *     the last context switch to the debugger.
-   * XXX gcc's register numbers aren't all #defined in tm-i386.h.
-   */
-  noreg = 0;
-  for (i = 0; i < 3; ++i)		/* eax,ecx,edx */
-    supply_register (i, (char *)&noreg);
-
-  supply_register (3, (char *) &pcb->pcb_ebx);
-  supply_register (SP_REGNUM, (char *) &pcb->pcb_esp);
-  supply_register (FP_REGNUM, (char *) &pcb->pcb_ebp);
-  supply_register (6, (char *) &pcb->pcb_esi);
-  supply_register (7, (char *) &pcb->pcb_edi);
-  supply_register (PC_REGNUM, (char *) &pcb->pcb_eip);
-
-  for (i = 9; i < 14; ++i)		/* eflags, cs, ss, ds, es, fs */
-    supply_register (i, (char *) &noreg);
-  supply_register (15, (char *) &pcb->pcb_gs);
-
-  /* XXX 80387 registers?  */
-}
diff --git a/gnu/usr.bin/binutils/gdb/kvm-fbsd-sparc64.h b/gnu/usr.bin/binutils/gdb/kvm-fbsd-sparc64.h
deleted file mode 100644
index 52ed91c..0000000
--- a/gnu/usr.bin/binutils/gdb/kvm-fbsd-sparc64.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/* Kernel core dump functions below target vector, for GDB on FreeBSD/sparc64.
-   Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995
-   Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-*/
-
-__FBSDID("$FreeBSD$");
-
-#define	SPARC_INTREG_SIZE	8
-
-static void
-fetch_kcore_registers (struct pcb *pcbp)
-{
-  static struct frame top;
-  CORE_ADDR f_addr;
-  int i;
-
-  /* Get the register values out of the sys pcb and store them where
-     `read_register' will find them.  */
-  /*
-   * XXX many registers aren't available.
-   * XXX for the non-core case, the registers are stale - they are for
-   *     the last context switch to the debugger.
-   * XXX do something with the floating-point registers?
-   */
-  supply_register (SP_REGNUM, (char *)&pcbp->pcb_ufp);
-  supply_register (PC_REGNUM, (char *)&pcbp->pcb_pc);
-  f_addr = extract_address (&pcbp->pcb_ufp, SPARC_INTREG_SIZE);
-  /* Load the previous frame by hand (XXX) and supply it. */
-  read_memory (f_addr + SPOFF, (char *)&top, sizeof (top));
-  for (i = 0; i < 8; i++)
-    supply_register (i + L0_REGNUM, (char *)&top.fr_local[i]);
-  for (i = 0; i < 8; i++)
-    supply_register (i + I0_REGNUM, (char *)&top.fr_in[i]);
-}
-
-CORE_ADDR
-fbsd_kern_frame_saved_pc (struct frame_info *fi)
-{
-  struct minimal_symbol *sym;
-  CORE_ADDR frame, pc_addr, pc;
-  char *buf;
-
-  buf = alloca (MAX_REGISTER_RAW_SIZE);
-  /* XXX: duplicates fi->extra_info->bottom. */
-  frame = (fi->next != NULL) ? fi->next->frame : read_sp ();
-  pc_addr = frame + offsetof (struct frame, fr_in[7]);
-
-#define	READ_PC(pc, a, b) do { \
-  read_memory (a, b, SPARC_INTREG_SIZE); \
-  pc = extract_address (b, SPARC_INTREG_SIZE); \
-} while (0)
-
-  READ_PC (pc, pc_addr, buf);
-
-  sym = lookup_minimal_symbol_by_pc (pc);
-  if (sym != NULL)
-    {
-      if (strncmp (SYMBOL_NAME (sym), "tl0_", 4) == 0 ||
-	  strcmp (SYMBOL_NAME (sym), "btext") == 0 ||
-	  strcmp (SYMBOL_NAME (sym), "mp_startup") == 0 ||
-	  strcmp (SYMBOL_NAME (sym), "fork_trampoline") == 0)
-        {
-	  /*
-	   * Ugly kluge: user space addresses aren't separated from kernel
-	   * ones by range; if encountering a trap from user space, just
-	   * return a 0 to stop the trace.
-	   * Do the same for entry points of kernel processes to avoid
-	   * printing garbage.
-	   */
-	  pc = 0;
-        }
-      if (strncmp (SYMBOL_NAME (sym), "tl1_", 4) == 0)
-        {
-          pc_addr = fi->frame + sizeof (struct frame) +
-	    offsetof (struct trapframe, tf_tpc);
-          READ_PC (pc, pc_addr, buf);
-	}
-    }
-  return (pc);
-}
diff --git a/gnu/usr.bin/binutils/gdb/kvm-fbsd.c b/gnu/usr.bin/binutils/gdb/kvm-fbsd.c
deleted file mode 100644
index 93395a7..0000000
--- a/gnu/usr.bin/binutils/gdb/kvm-fbsd.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/* Kernel core dump functions below target vector, for GDB.
-   Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995
-   Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-*/
-
-#include <sys/cdefs.h>
-__FBSDID("$FreeBSD$");
-
-/*
- * This works like "remote" but, you use it like this:
- *     target kcore /dev/mem
- * or
- *     target kcore /var/crash/host/core.0
- *
- * This way makes it easy to short-circut the whole bfd monster,
- * and direct the inferior stuff to our libkvm implementation.
- *
- */
-
-#include <sys/param.h>
-#include <sys/user.h>
-#include <ctype.h>
-#include <fcntl.h>
-#include <kvm.h>
-#include <sys/sysctl.h>
-#include <paths.h>
-
-#include "defs.h"
-#include <readline/tilde.h>
-#include "gdb_string.h"
-#include "frame.h"  /* required by inferior.h */
-#include "inferior.h"
-#include "symfile.h"
-#include "objfiles.h"
-#include "command.h"
-#include "bfd.h"
-#include "gdbcore.h"
-#include "solist.h"
-
-#include "kvm-fbsd-machine.h"
-
-static void
-kcore_files_info (struct target_ops *);
-
-static void
-kcore_close (int);
-
-static void
-get_kcore_registers (int);
-
-static int
-xfer_umem (CORE_ADDR, char *, int, int);
-
-#ifdef SOLIB_ADD
-static int kcore_solib_add_stub (PTR);
-#endif
-
-static char		*core_file;
-static kvm_t		*core_kd;
-static struct pcb	cur_pcb;
-static struct kinfo_proc *cur_proc;
-
-static struct target_ops kcore_ops;
-
-int kernel_debugging;
-int kernel_writablecore;
-
-/* Read the "thing" at kernel address 'addr' into the space pointed to
-   by point.  The length of the "thing" is determined by the type of p.
-   Result is non-zero if transfer fails.  */
-
-#define kvread(addr, p) \
-  (target_read_memory ((CORE_ADDR) (addr), (char *) (p), sizeof (*(p))))
-
-static CORE_ADDR
-ksym_kernbase (void)
-{
-  static CORE_ADDR kernbase;
-  struct minimal_symbol *sym;
-
-  if (kernbase == 0)
-    {
-      sym = lookup_minimal_symbol ("kernbase", NULL, NULL);
-      if (sym == NULL) {
-	kernbase = KERNBASE;
-      } else {
-	kernbase = SYMBOL_VALUE_ADDRESS (sym);
-      }
-    }
-  return kernbase;
-}
-
-#define	KERNOFF		(ksym_kernbase ())
-#define	INKERNEL(x)	((x) >= KERNOFF)
-
-static CORE_ADDR
-ksym_lookup(const char *name)
-{
-  struct minimal_symbol *sym;
-
-  sym = lookup_minimal_symbol (name, NULL, NULL);
-  if (sym == NULL)
-    error ("kernel symbol `%s' not found.", name);
-
-  return SYMBOL_VALUE_ADDRESS (sym);
-}
-
-/* Provide the address of an initial PCB to use.
-   If this is a crash dump, try for "dumppcb".
-   If no "dumppcb" or it's /dev/mem, use proc0.
-   Return the core address of the PCB we found.  */
-
-static CORE_ADDR
-initial_pcb (void)
-{
-  struct minimal_symbol *sym;
-  CORE_ADDR addr;
-  void *val;
-
-  /* Make sure things are open...  */
-  if (!core_kd || !core_file)
-    return (0);
-
-  /* If this is NOT /dev/mem try for dumppcb.  */
-  if (strncmp (core_file, _PATH_DEV, sizeof _PATH_DEV - 1))
-    {
-      sym = lookup_minimal_symbol ("dumppcb", NULL, NULL);
-      if (sym != NULL)
-	{
-	  addr = SYMBOL_VALUE_ADDRESS (sym);
-	  return (addr);
-	}
-  }
-
-  /* OK, just use thread0's pcb.  Note that curproc might
-     not exist, and if it does, it will point to gdb.
-     Therefore, just use proc0 and let the user set
-     some other context if they care about it.  */
-
-  addr = ksym_lookup ("thread0");
-  if (kvread (addr, &val))
-    {
-      error ("cannot read thread0 pointer at %x\n", addr);
-      val = 0;
-    }
-  else
-    {
-      /* Read the PCB address in thread structure.  */
-      addr += offsetof (struct thread, td_pcb);
-      if (kvread (addr, &val))
-	{
-	  error ("cannot read thread0->td_pcb pointer at %x\n", addr);
-	  val = 0;
-	}
-    }
-
-  /* thread0 is wholly in the kernel and cur_proc is only used for
-     reading user mem, so no point in setting this up.  */
-  cur_proc = 0;
-
-  return ((CORE_ADDR)val);
-}
-
-/* Set the current context to that of the PCB struct at the system address
-   passed.  */
-
-static int
-set_context (CORE_ADDR addr)
-{
-  if (kvread (addr, &cur_pcb))
-    error ("cannot read pcb at %#x", addr);
-
-  /* Fetch all registers from core file.  */
-  target_fetch_registers (-1);
-
-  /* Now, set up the frame cache, and print the top of stack.  */
-  flush_cached_frames ();
-  set_current_frame (create_new_frame (read_fp (), read_pc ()));
-  select_frame (get_current_frame (), 0);
-  return (0);
-}
-
-/* Discard all vestiges of any previous core file and mark data and stack
-   spaces as empty.  */
-
-/* ARGSUSED */
-static void
-kcore_close (int quitting)
-{
-
-  inferior_ptid = null_ptid;	/* Avoid confusion from thread stuff.  */
-
-  /* Clear out solib state while the bfd is still open. See
-     comments in clear_solib in solib.c. */
-#ifdef CLEAR_SOLIB
-  CLEAR_SOLIB ();
-#endif
-
-  if (core_kd)
-    {
-      kvm_close (core_kd);
-      free (core_file);
-      core_file = NULL;
-      core_kd = NULL;
-    }
-}
-
-/* This routine opens and sets up the core file bfd.  */
-
-static void
-kcore_open (char *filename /* the core file */, int from_tty)
-{
-  kvm_t *kd;
-  const char *p;
-  struct cleanup *old_chain;
-  char buf[256], *cp;
-  int ontop;
-  CORE_ADDR addr;
-
-  target_preopen (from_tty);
-
-  /* The exec file is required for symbols.  */
-  if (exec_bfd == NULL)
-    error ("No kernel exec file specified");
-
-  if (core_kd)
-    {
-      error ("No core file specified."
-	     "  (Use `detach' to stop debugging a core file.)");
-      return;
-    }
-
-  if (!filename)
-    {
-      error ("No core file specified.");
-      return;
-    }
-
-  filename = tilde_expand (filename);
-  if (filename[0] != '/')
-    {
-      cp = concat (current_directory, "/", filename, NULL);
-      free (filename);
-      filename = cp;
-    }
-
-  old_chain = make_cleanup (free, filename);
-
-  kd = kvm_open (bfd_get_filename(exec_bfd), filename, NULL,
-		 kernel_writablecore ? O_RDWR: O_RDONLY, 0);
-  if (kd == NULL)
-    {
-      perror_with_name (filename);
-      return;
-    }
-
-  /* Looks semi-reasonable.  Toss the old core file and work on the new.  */
-
-  discard_cleanups (old_chain);		/* Don't free filename any more.  */
-  core_file = filename;
-  unpush_target (&kcore_ops);
-  ontop = !push_target (&kcore_ops);
-
-  /* Note unpush_target (above) calls kcore_close.  */
-  core_kd = kd;
-
-  /* Print out the panic string if there is one.  */
-  if (kvread (ksym_lookup ("panicstr"), &addr) == 0 &&
-      addr != 0 &&
-      target_read_memory (addr, buf, sizeof(buf)) == 0)
-    {
-
-      for (cp = buf; cp < &buf[sizeof(buf)] && *cp; cp++)
-	if (!isascii (*cp) || (!isprint (*cp) && !isspace (*cp)))
-	  *cp = '?';
-      *cp = '\0';
-      if (buf[0] != '\0')
-	printf_filtered ("panic: %s\n", buf);
-    }
-
-  /* Print all the panic messages if possible.  */
-  if (symfile_objfile != NULL)
-    {
-      printf ("panic messages:\n---\n");
-      snprintf (buf, sizeof buf,
-                "/sbin/dmesg -N %s -M %s | \
-                 /usr/bin/awk '/^(panic:|Fatal trap) / { printing = 1 } \
-                               { if (printing) print $0 }'",
-                symfile_objfile->name, filename);
-      fflush (stdout);
-      system (buf);
-      printf ("---\n");
-    }
-
-  if (ontop)
-    {
-      /* Add symbols and section mappings for any kernel modules.  */
-#ifdef SOLIB_ADD
-      current_target_so_ops = &kgdb_so_ops;
-      catch_errors (kcore_solib_add_stub, &from_tty, (char *) 0,
-		    RETURN_MASK_ALL);
-#endif
-    }
-  else
-    {
-      warning ("you won't be able to access this core file until you terminate\n"
-		"your %s; do ``info files''", target_longname);
-      return;
-    }
-
-  /* Now, set up process context, and print the top of stack.  */
-  (void)set_context (initial_pcb());
-  print_stack_frame (selected_frame, selected_frame_level, 1);
-}
-
-static void
-kcore_detach (char *args, int from_tty)
-{
-  if (args)
-    error ("Too many arguments");
-  unpush_target (&kcore_ops);
-  reinit_frame_cache ();
-  if (from_tty)
-    printf_filtered ("No kernel core file now.\n");
-}
-
-/* Get the registers out of a core file.  This is the machine-
-   independent part.  Fetch_core_registers is the machine-dependent
-   part, typically implemented in the xm-file for each architecture.  */
-
-/* We just get all the registers, so we don't use regno.  */
-
-/* ARGSUSED */
-static void
-get_kcore_registers (int regno)
-{
-
-  /* XXX - Only read the pcb when set_context() is called.
-     When looking at a live kernel this may be a problem,
-     but the user can do another "proc" or "pcb" command to
-     grab a new copy of the pcb...  */
-
-  /* Zero out register set then fill in the ones we know about.  */
-  fetch_kcore_registers (&cur_pcb);
-}
-
-static void
-kcore_files_info (t)
-  struct target_ops *t;
-{
-  printf_filtered ("\t`%s'\n", core_file);
-}
-
-static int
-xfer_kmem (CORE_ADDR memaddr, char *myaddr, int len, int write,
-	   struct mem_attrib *attrib, struct target_ops *target)
-{
-  int n;
-
-
-  if (!INKERNEL (memaddr))
-    return xfer_umem (memaddr, myaddr, len, write);
-
-  if (core_kd == NULL)
-    return 0;
-
-  if (write)
-    n = kvm_write (core_kd, memaddr, myaddr, len);
-  else
-    n = kvm_read (core_kd, memaddr, myaddr, len) ;
-  if (n < 0) {
-    fprintf_unfiltered (gdb_stderr, "can not access 0x%x, %s\n",
-			(unsigned)memaddr, kvm_geterr (core_kd));
-    n = 0;
-  }
-
-  return n;
-}
-
-
-static int
-xfer_umem (CORE_ADDR memaddr, char *myaddr, int len, int write /* ignored */)
-{
-  int n = 0;
-
-  if (cur_proc == 0)
-    {
-      error ("---Can't read userspace from dump, or kernel process---\n");
-      return 0;
-    }
-
-  if (write)
-    error ("kvm_uwrite unimplemented\n");
-  else
-    n = kvm_uread (core_kd, cur_proc, memaddr, myaddr, len) ;
-
-  if (n < 0)
-    return 0;
-
-  return n;
-}
-
-static void
-set_proc_cmd (char *arg, int from_tty)
-{
-  CORE_ADDR addr, pid_addr, first_td;
-  void *val;
-  struct kinfo_proc *kp;
-  int cnt;
-  pid_t pid;
-
-  if (!arg)
-    error_no_arg ("proc address for the new context");
-
-  if (core_kd == NULL)
-    error ("no kernel core file");
-
-  addr = (CORE_ADDR) parse_and_eval_address (arg);
-
-  if (!INKERNEL (addr))
-    {
-      kp = kvm_getprocs (core_kd, KERN_PROC_PID, addr, &cnt);
-      if (!cnt)
-	error ("invalid pid");
-      addr = (CORE_ADDR)kp->ki_paddr;
-      cur_proc = kp;
-    }
-  else
-    {
-      /* Update cur_proc.  */
-      pid_addr = addr + offsetof (struct proc, p_pid);
-      if (kvread (pid_addr, &pid))
-	error ("cannot read pid ptr");
-      cur_proc = kvm_getprocs (core_kd, KERN_PROC_PID, pid, &cnt);
-      if (!cnt)
-	error("invalid pid");
-    }
-
-  /* Find the first thread in the process.  XXXKSE  */
-  addr += offsetof (struct proc, p_threads.tqh_first);
-  if (kvread (addr, &first_td))
-    error ("cannot read thread ptr");
-
-  /* Read the PCB address in thread structure. */
-  addr = first_td + offsetof (struct thread, td_pcb);
-  if (kvread (addr, &val))
-    error("cannot read pcb ptr");
-
-  /* Read the PCB address in proc structure. */
-  if (set_context ((CORE_ADDR) val))
-    error ("invalid proc address");
-}
-
-#ifdef SOLIB_ADD
-static int
-kcore_solib_add_stub (PTR from_ttyp)
-{
-  SOLIB_ADD (NULL, *(int *) from_ttyp, &current_target, auto_solib_add);
-  return 0;
-}
-#endif /* SOLIB_ADD */
-
-void
-_initialize_kcorelow (void)
-{
-  kcore_ops.to_shortname = "kcore";
-  kcore_ops.to_longname = "Kernel core dump file";
-  kcore_ops.to_doc =
-    "Use a core file as a target.  Specify the filename of the core file.";
-  kcore_ops.to_open = kcore_open;
-  kcore_ops.to_close = kcore_close;
-  kcore_ops.to_attach = find_default_attach;
-  kcore_ops.to_detach = kcore_detach;
-  kcore_ops.to_fetch_registers = get_kcore_registers;
-  kcore_ops.to_xfer_memory = xfer_kmem;
-  kcore_ops.to_files_info = kcore_files_info;
-  kcore_ops.to_create_inferior = find_default_create_inferior;
-  kcore_ops.to_stratum = kcore_stratum;
-  kcore_ops.to_has_memory = 1;
-  kcore_ops.to_has_stack = 1;
-  kcore_ops.to_has_registers = 1;
-  kcore_ops.to_magic = OPS_MAGIC;
-
-  add_target (&kcore_ops);
-  add_com ("proc", class_obscure, set_proc_cmd, "Set current process context");
-}
diff --git a/gnu/usr.bin/binutils/gdb/solib-fbsd-kld.c b/gnu/usr.bin/binutils/gdb/solib-fbsd-kld.c
deleted file mode 100644
index 190e6e6..0000000
--- a/gnu/usr.bin/binutils/gdb/solib-fbsd-kld.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/* Handle FreeBSD kernel modules as shared libraries.
-   Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000,
-   2001
-   Free Software Foundation, Inc.
-
-   This file is part of GDB.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/* $FreeBSD$ */
-
-#include <sys/param.h>
-#include <sys/queue.h>
-#include <sys/stat.h>
-#define _KERNEL
-#include <sys/linker.h>
-#undef _KERNEL
-
-/* XXX, kludge to avoid duplicate definitions while sys/linker.h is used. */
-#define _ELF_COMMON_H
-
-#include "defs.h"
-#include "symtab.h"
-#include "bfd.h"
-#include "symfile.h"
-#include "objfiles.h"
-#include "gdbcore.h"
-#include "target.h"
-#include "inferior.h"
-
-#include "solist.h"
-
-struct lm_info
-  {
-     CORE_ADDR address;
-  };
-
-static int try_modpath (char *buf, int buflen, char *fmt, ...);
-static char *guess_modpath (char *modname);
-
-static void
-kgdb_relocate_section_addresses (struct so_list *so,
-				 struct section_table *sec)
-{
-  sec->addr += so->lm_info->address;
-  sec->endaddr += so->lm_info->address;
-}
-
-static int
-kgdb_open_symbol_file_object (void *from_ttyp)
-{
-  warning ("kgdb_open_symbol_file_object called\n");
-  return 0;
-}
-
-static struct so_list *
-kgdb_current_sos (void)
-{
-  linker_file_list_t linker_files;
-  struct linker_file lfile;
-  struct minimal_symbol *msymbol;
-  struct linker_file *lfilek;
-  struct so_list *head = NULL;
-  struct so_list **link_ptr = &head;
-
-  CORE_ADDR lfiles_addr;
-
-  msymbol = lookup_minimal_symbol ("linker_files", NULL, symfile_objfile);
-  if (msymbol == NULL || SYMBOL_VALUE_ADDRESS (msymbol) == 0)
-    {
-      warning ("failed to find linker_files symbol\n");
-      return 0;
-    }
-  lfiles_addr = SYMBOL_VALUE_ADDRESS (msymbol);
-  if (target_read_memory (lfiles_addr, (char *)&linker_files,
-			  sizeof (linker_files)))
-    {
-      warning ("failed to read linker_files data\n");
-      return 0;
-    }
-  for (lfilek = TAILQ_FIRST (&linker_files); lfilek != NULL;
-       lfilek = TAILQ_NEXT (&lfile, link))
-   {
-      struct so_list *new;
-      struct cleanup *old_chain;
-      char *buf;
-      int errcode;
-
-      if (target_read_memory ((CORE_ADDR) lfilek, (char *) &lfile,
-	  sizeof (lfile)))
-	{
-	  warning ("failed to read linker file data at %p\n", lfilek);
-	  return 0;
-	}
-      target_read_string ((CORE_ADDR) lfile.filename, &buf,
-			  SO_NAME_MAX_PATH_SIZE - 1, &errcode);
-      if (errcode != 0)
-	{
-	  warning ("cannot read linker file pathname: %s\n",
-		   safe_strerror (errcode));
-	  return 0;
-	}
-      if (strlen (buf) < 3 || strcmp (&buf[strlen (buf) - 3], ".ko") != 0)
-	{
-	  xfree (buf);
-	  continue;
-	}
-
-      new = (struct so_list *) xmalloc (sizeof (struct so_list));
-      old_chain = make_cleanup (xfree, new);
-
-      memset (new, 0, sizeof (*new));
-
-      new->lm_info = xmalloc (sizeof (struct lm_info));
-      make_cleanup (xfree, new->lm_info);
-
-      new->lm_info->address = (CORE_ADDR) lfile.address;
-
-      strncpy (new->so_original_name, buf, SO_NAME_MAX_PATH_SIZE - 1);
-      new->so_original_name[SO_NAME_MAX_PATH_SIZE - 1] = '\0';
-      xfree (buf);
-      snprintf (new->so_name, SO_NAME_MAX_PATH_SIZE, "%s",
-		guess_modpath (new->so_original_name));
-
-      new->next = NULL;
-      *link_ptr = new;
-      link_ptr = &new->next;
-
-      discard_cleanups (old_chain);
-    }
-  return head;
-}
-
-static int
-kgdb_in_dynsym_resolve_code (CORE_ADDR pc)
-{
-  warning ("kgdb_in_dynsym_resolve_code called\n");
-  return 0;
-}
-
-static void
-kgdb_special_symbol_handling (void)
-{
-}
-
-static void
-kgdb_solib_create_inferior_hook (void)
-{
-  struct so_list *inferior_sos;
-
-  inferior_sos = kgdb_current_sos ();
-  if (inferior_sos)
-    {
-      solib_add (NULL, /*from_tty*/0, NULL, auto_solib_add);
-    }
-}
-
-static void
-kgdb_clear_solib (void)
-{
-}
-
-static void
-kgdb_free_so (struct so_list *so)
-{
-  xfree (so->lm_info);
-}
-
-static int
-try_modpath (char *buf, int buflen, char *fmt, ...)
-{
-  struct stat sb;
-  va_list ap;
-
-  va_start (ap, fmt);
-  vsnprintf (buf, buflen, fmt, ap);
-  va_end(ap);
-
-  return (stat (buf, &sb) == 0);
-}
-
-static char *
-guess_modpath (char *modname)
-{
-  static char buf[2048], moddir[128], syspath[1024];
-  struct minimal_symbol *msymbol;
-  char *kernpath, *objpath, *p, *version;
-  int errcode, n, syspathlen;
-
-  /* Set default module location */
-  snprintf (buf, sizeof (buf), "/boot/kernel/%s", modname);
-
-  /* Guess at the subdirectory off sys/modules. XXX, only sometimes correct */
-  n = strlen (modname);
-  if (n > 3 && strcmp (&modname[n - 3], ".ko") == 0)
-    n -= 3;
-  snprintf (moddir, sizeof (moddir), "%.*s", n, modname);
-
-  /* Try to locate the kernel compile location from version[] */
-  msymbol = lookup_minimal_symbol ("version", NULL, symfile_objfile);
-  if (msymbol == NULL || SYMBOL_VALUE_ADDRESS (msymbol) == 0)
-    {
-      warning("cannot find `version' symbol; using default module path\n");
-      return buf;
-    }
-  target_read_string (SYMBOL_VALUE_ADDRESS (msymbol), &version, 2048, &errcode);
-  if (errcode != 0)
-    {
-      warning ("cannot read `version' string; using default module path: %s\n",
-	       safe_strerror (errcode));
-      return buf;
-    }
-
-  /* Find the kernel build path after user@host: on the second line. */
-  if ((p = strchr (version, '\n')) == NULL ||
-      (kernpath = strchr (p, ':')) == NULL ||
-      (p = strchr (kernpath, '\n')) == NULL)
-    {
-      warning ("cannot parse version[]; using default module path\n");
-      xfree (version);
-      return buf;
-    }
-  kernpath++;
-  *p = '\0';
-
-  /*
-   * Find the absolute path to src/sys by skipping back over path
-   * components until we find a "/sys/".
-   */
-  syspathlen = 0;
-  while (p > kernpath && syspathlen == 0)
-    {
-      while (p > kernpath && *p != '/')
-	p--;
-      if (strncmp (p, "/sys/", 5) == 0)
-        syspathlen = p - kernpath + 4;
-      else if (p > kernpath)
-	p--;
-    }
-  if (syspathlen == 0)
-    {
-      warning ("cannot find /sys/ in `%s'; using default module path\n",
-	       kernpath);
-      xfree (version);
-      return buf;
-    }
-  /*
-   * For kernels compiled with buildkernel, the object path will have
-   * been prepended to the /sys/ path in `kernpath'.
-   */
-  objpath = getenv ("MAKEOBJDIRPREFIX");
-  if (objpath == NULL)
-    objpath = "/usr/obj";
-  n = strlen (objpath);
-  if (syspathlen > n + 1 && strncmp (kernpath, objpath, n) == 0 &&
-      kernpath[n] == '/')
-    snprintf (syspath, sizeof (syspath), "%.*s", syspathlen - n, kernpath + n);
-  else
-    snprintf (syspath, sizeof (syspath), "%.*s", syspathlen, kernpath);
-
-  /* Now try to find the module file */
-  if (!try_modpath (buf, sizeof (buf), "./%s.debug", modname) &&
-      !try_modpath (buf, sizeof (buf), "./%s", modname) && !try_modpath (buf,
-      sizeof (buf), "%s/modules%s/modules/%s/%s.debug", kernpath, syspath,
-      moddir, modname) && !try_modpath (buf, sizeof (buf),
-      "%s/modules%s/modules/%s/%s", kernpath, syspath, moddir, modname) &&
-      !try_modpath (buf, sizeof (buf), "/boot/kernel/%s.debug", modname) &&
-      !try_modpath (buf, sizeof (buf), "/boot/kernel/%s", modname))
-    {
-      warning ("cannot find file for module %s\n", modname);
-      snprintf (buf, sizeof (buf), "%s", modname);
-    }
-  xfree (version);
-
-  return buf;
-}
-
-struct target_so_ops kgdb_so_ops;
-
-void
-_initialize_kgdb_solib (void)
-{
-  kgdb_so_ops.relocate_section_addresses = kgdb_relocate_section_addresses;
-  kgdb_so_ops.free_so = kgdb_free_so;
-  kgdb_so_ops.clear_solib = kgdb_clear_solib;
-  kgdb_so_ops.solib_create_inferior_hook = kgdb_solib_create_inferior_hook;
-  kgdb_so_ops.special_symbol_handling = kgdb_special_symbol_handling;
-  kgdb_so_ops.current_sos = kgdb_current_sos;
-  kgdb_so_ops.open_symbol_file_object = kgdb_open_symbol_file_object;
-  kgdb_so_ops.in_dynsym_resolve_code = kgdb_in_dynsym_resolve_code;
-}
diff --git a/gnu/usr.bin/binutils/gdbreplay/Makefile b/gnu/usr.bin/binutils/gdbreplay/Makefile
deleted file mode 100644
index 107051a..0000000
--- a/gnu/usr.bin/binutils/gdbreplay/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-# $FreeBSD$
-
-.include "../Makefile.inc0"
-
-# Not elf specific so don't install in /usr/libexec/elf
-BINDIR=/usr/bin
-
-GDBDIR=	${.CURDIR}/../../../../contrib/gdb
-.PATH:	${GDBDIR}/gdb/gdbserver
-.PATH:	${GDBDIR}/gdb
-
-PROG=	gdbreplay
-NO_MAN=
-
-SRCS=	gdbreplay.c
-
-CFLAGS+=	-I${.CURDIR}/../gdb
-CFLAGS+=	-I${GDBDIR}/gdb
-CFLAGS+=	-I${GDBDIR}/gdb/config
-CFLAGS+=	-I${GDBDIR}/gdb/gdbserver
-CFLAGS+=	-DNO_MMALLOC
-
-.include <bsd.prog.mk>