Removed whitespace at BOF, EOL & EOF.

31 files changed, 107 insertions, 111 deletions

diff --git a/etc/bluetooth/hcsecd.conf b/etc/bluetooth/hcsecd.conf
index fc43685..71a22d4 100644
--- a/etc/bluetooth/hcsecd.conf
+++ b/etc/bluetooth/hcsecd.conf
@@ -24,14 +24,14 @@
 #	local device received the request. Everything is based on remote
 #	device BD_ADDR.
 #
-#	"nokey"	means that no link key has been defined and we should 
+#	"nokey"	means that no link key has been defined and we should
 #		send Link_Key_Negative_Reply command to the device.
 #
-#	"nopin"	means that no PIN code has been defined and we should 
+#	"nopin"	means that no PIN code has been defined and we should
 #		send PIN_Code_Negative_Reply command to the device
 #
 
-# Default entry is applied if no better match found 
+# Default entry is applied if no better match found
 # It MUST have 00:00:00:00:00:00 as bdaddr
 device {
 	bdaddr	00:00:00:00:00:00;
diff --git a/etc/csh.login b/etc/csh.login
index 7d70f93..62deb32 100644
--- a/etc/csh.login
+++ b/etc/csh.login
@@ -1,10 +1,10 @@
 # $FreeBSD$
 #
 # System-wide .login file for csh(1).
-# Uncomment this to give you the default 4.2 behavior, where disk 
+# Uncomment this to give you the default 4.2 behavior, where disk
 # information is shown in K-Blocks
 # setenv BLOCKSIZE	K
-# 
+#
 # For the setting of languages and character sets please see
 # login.conf(5) and in particular the charset and lang options.
 # For full locales list check /usr/share/locale/*
diff --git a/etc/defaults/pccard.conf b/etc/defaults/pccard.conf
index 93fac3e..93e72bc 100644
--- a/etc/defaults/pccard.conf
+++ b/etc/defaults/pccard.conf
@@ -243,7 +243,7 @@ card "PC CARD MANUFACTURER" "PCMCIA ATA/ATAPI Adapter"
 card "PCMCIA" "CD-ROM"
 	config	0x1 "ata" ?
 
-# Novac DVD/CD Station 
+# Novac DVD/CD Station
 card "PCMCIA" "PnPIDE"
 	config	auto "ata" ?
 
@@ -301,7 +301,7 @@ card "WORKBIT" "ATA-32Bi(16)"
 # Viking ATA Flash card
 card "/VIKING ATA/CF FLASH CARD */" "/TOR/AM */"
 	config	0x2 "ata" ?
-	
+
 ########## awi ##########
 
 # Generic AMD Am79c930 based card
@@ -595,8 +595,8 @@ card "Dynalink" "L100C16"
 	remove	/etc/pccard_ether $device stop
 
 # Linksys Combo PCMCIA Ethernet Card
-card "E-CARD" "E-CARD" 
-	config	auto "ed" ? 
+card "E-CARD" "E-CARD"
+	config	auto "ed" ?
 	logstr	"Linksys Combo Ethernet Card"
 	insert	/etc/pccard_ether $device start
 	remove	/etc/pccard_ether $device stop
@@ -610,7 +610,7 @@ card "EIGER Labs Inc." "Ethernet COMBO Card"
 # XXX	Compex Net-A adapter, Telecom SuperSocket RE450T,
 # 	Apollo PCMCIA Ethernet Adapter, PLANEX ENW-3503-T and
 #	Fiber line 10M Ethernet COMBO have same manufacturer and
-#	card version string.  They should be distinguished by 
+#	card version string.  They should be distinguished by
 #	other info. (such as additional information or OEM-ID/product-ID).
 
 # Note: There are several revisions of the card on the market.
@@ -762,9 +762,9 @@ card "Laneed" "LD-CDL/TX"
 	insert	/etc/pccard_ether $device start
 	remove	/etc/pccard_ether $device stop
 
-# Linksys Combo PCMCIA EthernetCard (model EC2T on box) 
+# Linksys Combo PCMCIA EthernetCard (model EC2T on box)
 card "Linksys" "Combo PCMCIA EthernetCard (EC2T)"
-	config	auto "ed" ? 
+	config	auto "ed" ?
 	insert	/etc/pccard_ether $device start
 	remove	/etc/pccard_ether $device stop
 
@@ -959,7 +959,7 @@ card "PCMCIA" "UE2212"
 # GVC 10Mbps Ethernet Card
 card "PCMCIA" "Ethernet Card"
 	config	auto "ed" ?
-	logstr	"Generic PCMCIA Ethernet Card" 
+	logstr	"Generic PCMCIA Ethernet Card"
 	insert	/etc/pccard_ether $device start
 	remove	/etc/pccard_ether $device stop
 
@@ -1387,9 +1387,9 @@ card "3Com Corporation" "/3C56[23]/"
 card "ADVANTECH" "COMpad-32/85"
 	config	auto "sio" ? 0x330
 
-# Apex Data 28.8 PC Card "MOBILE PLUS Cellular" modem. 
-card "AD PC_CARD" "RC288ACL" 
-	config	auto "sio" ? 
+# Apex Data 28.8 PC Card "MOBILE PLUS Cellular" modem.
+card "AD PC_CARD" "RC288ACL"
+	config	auto "sio" ?
 
 # AIWA PV-JF288
 card "AIWA CO.,LTD." "/PV-JF288 */"
@@ -1506,7 +1506,7 @@ card "Megahertz" "XJEM1144/CCEM1144"
 	config	0x27 "sio" ?
 #	config	auto "sio" ?
 
-# Motorola Montana 
+# Motorola Montana
 card "Motorola" "MONTANA 33.6 FAX/MODEM"
 	config	auto "sio" ?
 
@@ -1589,7 +1589,7 @@ card "Option International" "GSM Data/Fax/SMS Modem"
 card "PCCardModem" "CardModem 56"
 	config	auto "sio" ?
 
-# Eiger PCCARD modem 
+# Eiger PCCARD modem
 # Apparently this modem does not work unless the recommended
 # init string (AT&F&C1&D2) is supplied.
 card "/PCMCIA */" "/33\.6K Fax/Modem */"
@@ -1703,7 +1703,7 @@ card "Xircom" "CreditCard Modem CM-56T"
 card "PC CARD" "56Kbps Fax Modem PC Card"
 	config  auto "sio" ?
 
-# Zoom 56K modem 
+# Zoom 56K modem
 # Freezes your system entirely if you don't have the reset..
 card "Zoom Telephonics, Inc." "PCMCIA 56K LT DataFax"
 	config	auto "sio" ?
@@ -1768,7 +1768,7 @@ card "IBM Corp." "SCSI PCMCIA Card"
 
 # RATOC REX-5536AM, REX-9836A, ICM PSC-2401 SCSI
 # There's a buggy revision of this card which has broken CIS tupples.
-# If you can't use this card, change config entry from `auto' to 
+# If you can't use this card, change config entry from `auto' to
 # `default' and try the point enabler. (for example,
 # type "pccardc enabler 0 stg0 -a 0x4140 -i 5" from root command prompt)
 card "PCMCIA SCSI MBH10404" "01"
@@ -1845,7 +1845,7 @@ card "Accton" "IEEE802.11 PC Card Adapter"
 
 # Actiontec PRISM wireless
 card "ACTIONTEC" "PRISM Wireless LAN PC Card"
-	config	auto "wi" ?   
+	config	auto "wi" ?
 	insert	/etc/pccard_ether $device start
 	remove	/etc/pccard_ether $device stop
 
@@ -1881,13 +1881,13 @@ card "Avaya Communication" "Avaya Wireless PC Card"
 
 # Belkin wireless card
 card "Belkin" "11Mbps Wireless Notebook Network Adapter"
-	config	auto "wi" ? 
+	config	auto "wi" ?
 	insert	/etc/pccard_ether $device start
 	remove	/etc/pccard_ether $device stop
 
 # Benq AWL100 wireless 11 Mbps pcmcia card
 card "BENQ" "AWL100 PCMCIA ADAPTER"
-	config	auto "wi" ? 
+	config	auto "wi" ?
 	insert	/etc/pccard_ether $device start
 	remove	/etc/pccard_ether $device stop
 
@@ -2188,7 +2188,7 @@ card "Sony Corporation" "PCWA-C100"
 card "T-Sinus" "130card"
         config	auto "wi" ?
         insert	/etc/pccard_ether $device start
-        remove	/etc/pccard_ether $device stop 
+        remove	/etc/pccard_ether $device stop
 
 # TDK LAK-CD011WL
 card "TDK" "LAK-CD011WL for Wireless LAN"
@@ -2323,9 +2323,9 @@ card "Xircom" "Ethernet Adapter"
 	remove	/etc/pccard_ether $device stop
 
 # -------------------------------------------------------------------
-# 
+#
 # "Wildcard" entries
-# 
+#
 # -------------------------------------------------------------------
 
 # GENERIC PCMCIA modem
diff --git a/etc/devd.conf b/etc/devd.conf
index 3c1c867..60f9254 100644
--- a/etc/devd.conf
+++ b/etc/devd.conf
@@ -17,7 +17,7 @@ options {
 	pid-file "/var/run/devd.pid";
 
 	# Setup some shorthand for regex that we use later in the file.
-	set ethernet-nic-regex 
+	set ethernet-nic-regex
 		"(an|ar|ath|aue|awi|bfe|bge|cm|cnw|cs|cue|dc|de|ed|el|em|ep|\
 		ex|fe|fxp|gem|gx|hme|ie|kue|lge|lnc|my|nge|pcn|ray|re|rl|rue|\
 		sf|sis|sk|sn|snc|ste|ti|tl|tx|txp|vr|vx|wb|wi|xe|xl)[0-9]+";
diff --git a/etc/devfs.conf b/etc/devfs.conf
index db13ff1..f7869fe 100644
--- a/etc/devfs.conf
+++ b/etc/devfs.conf
@@ -1,7 +1,6 @@
-
 #  Copyright (c) 2003 The FreeBSD Project
 #  All rights reserved.
-# 
+#
 #  Redistribution and use in source and binary forms, with or without
 #  modification, are permitted provided that the following conditions
 #  are met:
@@ -10,7 +9,7 @@
 #  2. Redistributions in binary form must reproduce the above copyright
 #     notice, this list of conditions and the following disclaimer in the
 #     documentation and/or other materials provided with the distribution.
-# 
+#
 #  THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 #  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 #  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
@@ -22,7 +21,7 @@
 #  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 #  OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 #  SUCH DAMAGE.
-# 
+#
 #  $FreeBSD$
 
 # These are examples of how to configure devices using /etc/rc.d/devfs.
@@ -44,4 +43,3 @@
 # Allow members of group operator to cat things to the speaker
 #own	speaker	root:operator
 #perm	speaker	0660
-
diff --git a/etc/disktab b/etc/disktab
index 3c289a7..8f00299 100644
--- a/etc/disktab
+++ b/etc/disktab
@@ -1,6 +1,6 @@
 # $FreeBSD$
 #
-# Disk geometry and partition layout tables. 
+# Disk geometry and partition layout tables.
 # Key:
 #	dt	controller type
 #	ty	type of disk (fixed, removeable, simulated)
@@ -122,7 +122,7 @@ mk156|toshiba156|Toshiba MK156 156Mb:\
 	:pa#15748:oa#0:ba#4096:fa#512:ta=4.2BSD:\
 	:pb#15748:ob#15748:tb=swap:\
 	:pc#288750:oc#0:\
-	:ph#257250:oh#31500:bh#4096:fh#512:th=4.2BSD:	
+	:ph#257250:oh#31500:bh#4096:fh#512:th=4.2BSD:
 
 cp3100|Connor Peripherals 100MB IDE:\
 	:dt=ST506:ty=winchester:se#512:nt#8:ns#33:nc#766: \
diff --git a/etc/gettytab b/etc/gettytab
index e630ade..ed66750 100644
--- a/etc/gettytab
+++ b/etc/gettytab
@@ -205,7 +205,7 @@ A|Auto-baud:\
 autologin|al.9600:\
 	:al=root:tc=std.9600:
 
-# 
+#
 # Entries for 3-wire serial terminals.  These don't supply carrier, so
 # clocal needs to be set, and crtscts needs to be unset.
 #
diff --git a/etc/hosts.allow b/etc/hosts.allow
index e24f0c2..799f0754 100644
--- a/etc/hosts.allow
+++ b/etc/hosts.allow
@@ -7,12 +7,12 @@
 #	See hosts_options(5) for the format of this file.
 #	hosts_access(5) no longer fully applies.
 
-#	 _____                                      _          _ 
+#	 _____                                      _          _
 #	| ____| __  __   __ _   _ __ ___    _ __   | |   ___  | |
 #	|  _|   \ \/ /  / _` | | '_ ` _ \  | '_ \  | |  / _ \ | |
 #	| |___   >  <  | (_| | | | | | | | | |_) | | | |  __/ |_|
 #	|_____| /_/\_\  \__,_| |_| |_| |_| | .__/  |_|  \___| (_)
-#					   |_|                   
+#					   |_|
 # !!! This is an example! You will need to modify it for your specific
 # !!! requirements!
 
@@ -24,7 +24,7 @@ ALL : ALL : allow
 
 # Wrapping sshd(8) is not normally a good idea, but if you
 # need to do it, here's how
-#sshd : .evil.cracker.example.com : deny 
+#sshd : .evil.cracker.example.com : deny
 
 # Protect against simple DNS spoofing attacks by checking that the
 # forward and reverse records for the remote host match. If a mismatch
diff --git a/etc/inetd.conf b/etc/inetd.conf
index a7c32de..27b93f7 100644
--- a/etc/inetd.conf
+++ b/etc/inetd.conf
@@ -67,7 +67,7 @@
 #rstatd/1-3	dgram rpc/udp wait root	/usr/libexec/rpc.rstatd	 rpc.rstatd
 #rusersd/1-2	dgram rpc/udp wait root	/usr/libexec/rpc.rusersd rpc.rusersd
 #walld/1	dgram rpc/udp wait root	/usr/libexec/rpc.rwalld	 rpc.rwalld
-#pcnfsd/1-2	dgram rpc/udp wait root	/usr/libexec/rpc.pcnfsd	 rpc.pcnfsd	
+#pcnfsd/1-2	dgram rpc/udp wait root	/usr/libexec/rpc.pcnfsd	 rpc.pcnfsd
 #rquotad/1	dgram rpc/udp wait root	/usr/libexec/rpc.rquotad rpc.rquotad
 #sprayd/1	dgram rpc/udp wait root	/usr/libexec/rpc.sprayd	 rpc.sprayd
 #
diff --git a/etc/isdn/isdnd.rates.D b/etc/isdn/isdnd.rates.D
index 430f9da..388770e 100644
--- a/etc/isdn/isdnd.rates.D
+++ b/etc/isdn/isdnd.rates.D
@@ -25,7 +25,7 @@
 #
 #=================== T-ISDN City =============================================================
 #
-#rate-code Day rate1           rate2           rate3           rate4           rate5          
+#rate-code Day rate1           rate2           rate3           rate4           rate5
 #--------- --- --------------- --------------- --------------- --------------- ---------------
 ra0        0   00.00-05.00:240 05.00-21.00:150 21.00-24.00:240
 ra0        1   00.00-05.00:240 05.00-09.00:150 09.00-18.00:90  18.00-21.00:150 21.00-24.00:240
@@ -37,7 +37,7 @@ ra0        6   00.00-05.00:240 05.00-21.00:150 21.00-24.00:240
 #
 #=================== T-ISDN Deutschland ======================================================
 #
-#rate-code Day rate1           rate2           rate3           rate4           rate5          
+#rate-code Day rate1           rate2           rate3           rate4           rate5
 #--------- --- --------------- --------------- --------------- --------------- ---------------
 ra1        0   00.00-24.00:60
 ra1        1   00.00-02.00:60  02.00-05.00:120 05.00-09.00:60  09.00-18.00:30  18.00-24.00:60
diff --git a/etc/isdn/isdnd.rates.F b/etc/isdn/isdnd.rates.F
index 14d772d..6a73b75 100644
--- a/etc/isdn/isdnd.rates.F
+++ b/etc/isdn/isdnd.rates.F
@@ -47,7 +47,7 @@ ra0        6   00.00-08.00:317 08.00-12.00:158 12.00-24.00:317
 #
 #================== Zone 1 : < 25 km ==================================
 #
-#rate-code Day rate1           rate2           rate3          
+#rate-code Day rate1           rate2           rate3
 #--------- --- --------------- --------------- ---------------
 ra1        0   00.00-24.00:222
 ra1        1   00.00-08.00:222 08.00-19.00:111 19.00-24.00:222
@@ -61,8 +61,8 @@ ra1        6   00.00-08.00:222 08.00-12.00:111 12.00-24.00:222
 #
 #================== Zone 2 : 25-30 km =================================
 #
-#rate-code Day rate1           rate2           rate3          
-#--------- --- --------------- --------------- -------------- 
+#rate-code Day rate1           rate2           rate3
+#--------- --- --------------- --------------- --------------
 ra2        0   00.00-24.00:148
 ra2        1   00.00-08.00:148 08.00-19.00:74 19.00-24.00:148
 ra2        2   00.00-08.00:148 08.00-19.00:74 19.00-24.00:148
@@ -73,7 +73,7 @@ ra2        6   00.00-08.00:148 08.00-12.00:74 12.00-24.00:148
 #
 #=================== Zone 3 : 30-52 km ================================
 #
-#rate-code day rate1           rate2           rate3          
+#rate-code day rate1           rate2           rate3
 #--------- --- --------------- --------------- ---------------
 ra3        0   00.00-24.00:94
 ra3        1   00.00-08.00:94 08.00-19.00:47 19.00-24.00:94
@@ -86,7 +86,7 @@ ra3        6   00.00-08.00:94 08.00-12.00:47 12.00-24.00:94
 #
 #=================== Zone 4 : > 52 km =================================
 #
-#rate-code day rate1           rate2           rate3          
+#rate-code day rate1           rate2           rate3
 #--------- --- --------------- --------------- ---------------
 ra4        0   00.00-24.00:78
 ra4        1   00.00-08.00:78 08.00-19.00:39 19.00-24.00:78
@@ -100,7 +100,7 @@ ra4        6   00.00-08.00:78 08.00-12.00:39 12.00-24.00:78
 #=================== INTERNATIONAL : Allemagne ========================
 # (pour appeler Hellmuth)
 #
-#rate-code day rate1           rate2           rate3          
+#rate-code day rate1           rate2           rate3
 #--------- --- --------------- --------------- ---------------
 ra5        0   00.00-24.00:27
 ra5        1   00.00-08.00:27 08.00-19.00:21 19.00-24.00:27
@@ -113,7 +113,7 @@ ra5        6   00.00-08.00:27 08.00-12.00:21 12.00-24.00:27
 #
 #=================== INTERNATIONAL : Pays-Bas ==========================
 #
-#rate-code day rate1           rate2           rate3          
+#rate-code day rate1           rate2           rate3
 #--------- --- --------------- --------------- ---------------
 ra6        0   00.00-24.00:25
 ra6        1   00.00-08.00:25 08.00-19.00:20 19.00-24.00:25
@@ -126,7 +126,7 @@ ra6        6   00.00-08.00:25 08.00-12.00:20 12.00-24.00:25
 #
 #=================== INTERNATIONAL : Portugal ===========================
 #
-#rate-code day rate1           rate2           rate3          
+#rate-code day rate1           rate2           rate3
 #--------- --- --------------- --------------- ---------------
 ra7        0   00.00-24.00:22
 ra7        1   00.00-08.00:22 08.00-19.00:18 19.00-24.00:22
@@ -139,7 +139,7 @@ ra7        6   00.00-08.00:22 08.00-12.00:18 12.00-24.00:22
 #
 #=================== INTERNATIONAL : USA/Canada ========================
 #
-#rate-code day rate1           rate2           rate3          
+#rate-code day rate1           rate2           rate3
 #--------- --- --------------- --------------- ---------------
 ra8        0   00.00-24.00:25
 ra8        1   00.00-13.00:25 13.00-19.00:20 19.00-24.00:25
diff --git a/etc/isdn/isdnd.rates.L b/etc/isdn/isdnd.rates.L
index 1c4383a..d3992b0 100644
--- a/etc/isdn/isdnd.rates.L
+++ b/etc/isdn/isdnd.rates.L
@@ -26,7 +26,7 @@
 #
 #------------------------------------------------------------------------------
 #
-#rate-code Day rate1           rate2           rate3           rate4           rate5          
+#rate-code Day rate1           rate2           rate3           rate4           rate5
 #--------- --- --------------- --------------- --------------- --------------- ----------------
 ra0        0   00.00-24.00:960
 ra0        1   00.00-06.00:960 06.00-08.00:480 08.00-19.00:240 19.00-23.00:480 23.00-24.00:960
diff --git a/etc/isdn/isdnd.rc.sample b/etc/isdn/isdnd.rc.sample
index eef0f89..3878e7c 100644
--- a/etc/isdn/isdnd.rc.sample
+++ b/etc/isdn/isdnd.rc.sample
@@ -35,14 +35,14 @@ useacctfile	= yes			# generate accouting info to file
 monitor-allowed	= no			# global switch: monitor on/off
 monitor-port	= 451			# default monitor TCP port
 
-# Monitor rights are granted due to the most specific host/net spec, i.e. in 
+# Monitor rights are granted due to the most specific host/net spec, i.e. in
 # the example below host 192.168.1.2 will have the rights specified on that
 # line, even so it belongs to net 192.168.1.0/24 as well.
 #
 # A monitor specification may either be:
 #
 #  - the name of a local (UNIX-domain) socket; this MUST start with a "/"
-monitor		= "/var/run/isdn-monitor" 
+monitor		= "/var/run/isdn-monitor"
 monitor-access	= fullcmd
 monitor-access	= channelstate, logevents
 monitor-access	= callin, callout
@@ -92,7 +92,7 @@ firmware	= /etc/isdn/b1.t4	# microcode for an AVM B1 controller
 #==============================================================================
 # entry section: IP over ISDN example - i call back the remote end
 #==============================================================================
-entry				
+entry
 
 name        		= I4BIP		# name for reference. This name will
 					# be used in the logfile to identfy
@@ -119,9 +119,9 @@ remote-phone-incoming	= 0123456789	# this one can call in
 local-phone-dialout	= 321		# this is my number
 remote-phone-dialout	= 00123456789	# i call this remote number
 
-					# in case i have several remote 
-					# telephone numbers specified, this 
-					# is used to specify which one is 
+					# in case i have several remote
+					# telephone numbers specified, this
+					# is used to specify which one is
 					# used next on dial fail or retry:
 remdial-handling	= first		# first, last or next
 
@@ -139,7 +139,7 @@ callbackwait		= 1		# no of secs to wait before calling back
 					# specified for telephone answering
 b1protocol		= hdlc		# hdlc, raw
 
-					# shorthold mode and idle time 
+					# shorthold mode and idle time
 					# configuration:
 ratetype		= 0		# ratesfile entry to use
 unitlength		= 90		# unitlength to assume
@@ -170,18 +170,18 @@ downtime		= 30		# time to be in down before going up
 #==============================================================================
 # entry section: IP over ISDN example - i am called back by the remote end
 #==============================================================================
-entry				
-                                
+entry
+
 name        		= I4BIP1	# name for reference
-				
+
 usrdevicename		= ipr		# ipr, tel, rbch
 usrdeviceunit		= 1		# unit number
-				
+
 isdncontroller		= 0		# controller to use or -1 to use any
 isdnchannel		= -1		# channel (1/2) to use or 0 or -1 for any
 
 					# numbers used to DIAL OUT
-remote-phone-dialout	= 00401234567	# remote number to dial 
+remote-phone-dialout	= 00401234567	# remote number to dial
 local-phone-dialout	= 38		# our number to tell remote
 
 					# numbers used to verify at DIAL IN
@@ -194,7 +194,7 @@ ratetype		= 0		# city
 unitlength		= 90		# default unit length
 earlyhangup		= 5		# safety zone
 unitlengthsrc		= aocd		# none, rate, cmdl, conf, aocd
-				
+
 dialin-reaction		= accept	# accept, reject, ignore, anwer, callback
 
 dialout-type		= calledback	# normal or calledback
@@ -214,19 +214,19 @@ idletime-outgoing	= 30
 #==============================================================================
 # entry section: answering machine example
 #==============================================================================
-entry				
+entry
 
 name        		= I4BTEL	# name for reference
 usrdevicename		= tel		# ipr, tel, rbch
 usrdeviceunit           = 0             # unit number
-				
+
 isdncontroller		= 0		# controller to use or -1 to use any
 isdnchannel		= -1		# channel (1/2) to use or 0 or -1 for any
 
 					# numbers used to verify at DIAL IN
 local-phone-incoming	= 456		# this is my number
 remote-phone-incoming	= *		# anyone can call in
-				
+
 dialin-reaction		= answer	# accept, reject, ignore, answer
 
 answerprog		= answer	# program to run
@@ -238,15 +238,15 @@ idletime-incoming	= 5		# 5 seconds idle timeout
 #==============================================================================
 # kernel PPP (with budget handling) - Sunday & Holidays, we call back
 #==============================================================================
-entry				
+entry
 
 valid			= "0,7"		# sundays & holidays
 
 name        		= KPPPs		# name for reference
-				
+
 usrdevicename		= isp		# ipr, tel, rbch
 usrdeviceunit		= 0		# unit number
-				
+
 isdncontroller		= 1		# controller to use or -1 to use any
 isdnchannel		= -1		# channel (1/2) to use or 0 or -1 for any
 
@@ -259,7 +259,7 @@ local-phone-dialout	= 29		# this is my number
 remote-phone-dialout	= 00401234567	# i call this number
 
 remdial-handling	= first		# first, last or next
-				
+
 dialin-reaction		= callback	# accept, reject, ignore, answer, callback
 
 dialout-type		= normal	# normal / calledback
@@ -295,15 +295,15 @@ budget-calloutsfile-rotate = yes
 #==============================================================================
 # kernel PPP (with budget handling) - Monday-Saturday, 9:00-18:00: we call back
 #==============================================================================
-entry				
+entry
 
 valid			= "1,2,3,4,5,6,9:00-18:00" # Monday-Saturday, day
 
 name        		= KPPPd		# name for reference
-				
+
 usrdevicename		= isp		# ipr, tel, rbch
 usrdeviceunit		= 0		# unit number
-				
+
 isdncontroller		= 1		# controller to use or -1 to use any
 isdnchannel		= -1		# channel (1/2) to use or 0 or -1 for any
 
@@ -316,7 +316,7 @@ local-phone-dialout	= 29		# this is my number
 remote-phone-dialout	= 00401234567	# i call this number
 
 remdial-handling	= first		# first, last or next
-				
+
 dialin-reaction		= callback	# accept, reject, ignore, answer, callback
 
 dialout-type		= normal	# normal / calledback
@@ -352,15 +352,15 @@ budget-calloutsfile-rotate = yes
 #==============================================================================
 # kernel PPP (with budget handling) - Monday-Saturday: we call back
 #==============================================================================
-entry				
+entry
 
 valid			= "1,2,3,4,5,6,18:00-9:00" # Monday-Saturday, night
 
 name        		= KPPPn		# name for reference
-				
+
 usrdevicename		= isp		# ipr, tel, rbch
 usrdeviceunit		= 0		# unit number
-				
+
 isdncontroller		= 1		# controller to use or -1 to use any
 isdnchannel		= -1		# channel (1/2) to use or 0 or -1 for any
 
@@ -373,7 +373,7 @@ local-phone-dialout	= 29		# this is my number
 remote-phone-dialout	= 00401234567	# i call this number
 
 remdial-handling	= first		# first, last or next
-				
+
 dialin-reaction		= callback	# accept, reject, ignore, answer, callback
 
 dialout-type		= normal	# normal / calledback
diff --git a/etc/isdn/unknown_incoming b/etc/isdn/unknown_incoming
index 9e26a64..5debe21 100755
--- a/etc/isdn/unknown_incoming
+++ b/etc/isdn/unknown_incoming
@@ -8,8 +8,8 @@
 #
 #	last edit-date: [Wed Jan 10 13:40:36 2001]
 #
-#	This script may be configured to be called by isdnd when an 
-#	unknown incoming call is received. In case the destination 
+#	This script may be configured to be called by isdnd when an
+#	unknown incoming call is received. In case the destination
 #	telephone number is available, it sends mail with the time,
 #	source and destination numbers to a configurable address.
 #
@@ -75,5 +75,5 @@ Unknown incoming telephone call recognized:
                    the isdnd on $mach
 
 ENDOFDATA
- 
+
 exit 0
diff --git a/etc/login.access b/etc/login.access
index 8d20467..ffe5fff 100644
--- a/etc/login.access
+++ b/etc/login.access
@@ -1,18 +1,18 @@
 # $FreeBSD$
 #
 # Login access control table.
-# 
+#
 # When someone logs in, the table is scanned for the first entry that
 # matches the (user, host) combination, or, in case of non-networked
 # logins, the first entry that matches the (user, tty) combination.  The
-# permissions field of that table entry determines whether the login will 
+# permissions field of that table entry determines whether the login will
 # be accepted or refused.
-# 
+#
 # Format of the login access control table is three fields separated by a
 # ":" character:
-# 
+#
 # 	permission : users : origins
-# 
+#
 # The first field should be a "+" (access granted) or "-" (access denied)
 # character. The second field should be a list of one or more login names,
 # group names, or ALL (always matches).  The third field should be a list
@@ -29,7 +29,7 @@
 # listed: the program does not look at a user's primary group id value.
 #
 ##############################################################################
-# 
+#
 # Disallow console logins to all but a few accounts.
 #
 #-:ALL EXCEPT wheel shutdown sync:console
diff --git a/etc/login.conf b/etc/login.conf
index c96dcae..7b105ff 100644
--- a/etc/login.conf
+++ b/etc/login.conf
@@ -80,7 +80,7 @@ russian|Russian Users Accounts:\
 ######################################################################
 ##
 ## Example entries
-## 
+##
 ######################################################################
 ######################################################################
 
diff --git a/etc/namedb/named.conf b/etc/namedb/named.conf
index c877295..5b7a718 100644
--- a/etc/namedb/named.conf
+++ b/etc/namedb/named.conf
@@ -98,7 +98,7 @@ zone "1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.INT" {
 // and addresses instead.
 //
 // NOTE!!! FreeBSD can run bind in a sandbox (see named_flags in rc.conf).
-// The directory containing the secondary zones must be write accessible 
+// The directory containing the secondary zones must be write accessible
 // to bind.  The following sequence is suggested:
 //
 //	mkdir /etc/namedb/s
diff --git a/etc/namedb/named.root b/etc/namedb/named.root
index dfb88da..a6cd043 100644
--- a/etc/namedb/named.root
+++ b/etc/namedb/named.root
@@ -7,7 +7,7 @@
 ;       (e.g. reference this file in the "cache  .  <file>"
 ;       configuration file of BIND domain name servers).
 ;
-;       This file is made available by InterNIC 
+;       This file is made available by InterNIC
 ;       under anonymous FTP as
 ;           file                /domain/named.root
 ;           on server           FTP.INTERNIC.NET
@@ -70,7 +70,7 @@ J.ROOT-SERVERS.NET.      3600000      A     192.58.128.30
 ; operated by RIPE NCC
 ;
 .                        3600000      NS    K.ROOT-SERVERS.NET.
-K.ROOT-SERVERS.NET.      3600000      A     193.0.14.129 
+K.ROOT-SERVERS.NET.      3600000      A     193.0.14.129
 ;
 ; operated by ICANN
 ;
diff --git a/etc/network.subr b/etc/network.subr
index e4b89e1..8a3c4df 100644
--- a/etc/network.subr
+++ b/etc/network.subr
@@ -325,7 +325,7 @@ list_net_interfaces()
 		echo $_dhcplist
 		;;
 	esac
-	return 0			
+	return 0
 }
 
 hexdigit()
diff --git a/etc/pam.d/README b/etc/pam.d/README
index 53a23cb..7b8f958 100644
--- a/etc/pam.d/README
+++ b/etc/pam.d/README
@@ -20,7 +20,7 @@ Comments are introduced with a hash mark ('#').  Blank lines and lines
 consisting entirely of comments are ignored.
 
 The meanings of the different fields are as follows:
- 
+
  module-type:
    auth:      prompt for a password to authenticate that the user is
               who they say they are, and set any credentials.
@@ -28,7 +28,7 @@ The meanings of the different fields are as follows:
               resources, etc.
    session:   housekeeping before and/or after login.
    password:  update authentication tokens.
- 
+
  control-flag: How libpam handles success or failure of the module.
    required:   success is required; on failure all remaining
                modules are run, but the request will be denied.
@@ -39,7 +39,7 @@ The meanings of the different fields are as follows:
    binding:    success is sufficient; on failure all remaining
                modules are run, but the request will be denied.
    optional:   ignored unless the other modules return PAM_IGNORE.
- 
+
  arguments: Module-specific options, plus some generic ones:
    debug:           syslog debug info.
    no_warn:         return no warning messages to the application.
@@ -53,7 +53,7 @@ The meanings of the different fields are as follows:
    use_mapped_pass: convert cleartext password to a crypto key.
    expose_account:  allow printing more info about the user when
                     prompting.
- 
+
 Note that having a "sufficient" module as the last entry for a
 particular service and module type may result in surprising behaviour.
 To get the intended semantics, add a "required" entry listing the
diff --git a/etc/pam.d/convert.pl b/etc/pam.d/convert.pl
index 6859120..f4c0676 100644
--- a/etc/pam.d/convert.pl
+++ b/etc/pam.d/convert.pl
@@ -45,7 +45,7 @@ MAIN:{
     my $version;
     my $type;
     local *FILE;
-    
+
     while (<>) {
 	chomp();
 	s/\s*$//;
@@ -82,6 +82,6 @@ MAIN:{
 	close(FILE);
 	warn("$service\n");
     }
-    
+
     exit(0);
 }
diff --git a/etc/pccard_ether b/etc/pccard_ether
index c3329d0..100185e 100755
--- a/etc/pccard_ether
+++ b/etc/pccard_ether
@@ -263,7 +263,7 @@ case ${startstop} in
 	case ${removable_route_flush} in
 	[Nn][Oo])
 	        ;;
-	*)	
+	*)
 		# flush beforehand, just in case....
 		route -n flush -inet
 		;;
diff --git a/etc/pf.os b/etc/pf.os
index edc16c1..a72c9cf 100644
--- a/etc/pf.os
+++ b/etc/pf.os
@@ -364,7 +364,7 @@ T30:128:1:48:M*,N,N,S:			Windows:98::Windows 98
 64512:128:1:44:M1414:			Windows:NT:4.0:Windows NT 4.0 SP6a
 8192:128:1:44:M*:			Windows:NT:4.0:Windows NT 4.0 (older)
 6144:128:1:52:M*,W0,N,S,N,N:		Windows:NT:4.0:Windows NT 4.0 (RFC1323)
- 
+
 # Windows XP and 2000. Most of the signatures that were
 # either dubious or non-specific (no service pack data)
 # were deleted and replaced with generics at the end.
@@ -548,5 +548,3 @@ S12:64:0:44:M1452:			AXIS:5600:v5.64:AXIS Printer Server 5600 v5.64
 *:128:1:64:M*,N,W*,N,N,T0,N,N,S:	@Windows:XP:RFC1323:Windows XP (RFC1323, w+)
 *:128:1:48:M*,N,N,S:			@Windows:XP::Windows XP/2000
 *:128:1:48:M*,N,N,S:			@Windows:2000::Windows XP/2000
-
-
diff --git a/etc/printcap b/etc/printcap
index 83bfd83..5319a0e 100644
--- a/etc/printcap
+++ b/etc/printcap
@@ -20,7 +20,7 @@
 # If you don't have a PostScript(tm) printer, don't panic, but do
 # also install the latest "ghostscript" package for best printer support.
 #
-# Do also refer to the "printing" section of the handbook.  
+# Do also refer to the "printing" section of the handbook.
 #
 #	http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/printing.html
 #
diff --git a/etc/profile b/etc/profile
index 4705247..665b61a 100644
--- a/etc/profile
+++ b/etc/profile
@@ -2,7 +2,7 @@
 #
 # System-wide .profile file for sh(1).
 #
-# Uncomment this to give you the default 4.2 behavior, where disk 
+# Uncomment this to give you the default 4.2 behavior, where disk
 # information is shown in K-Blocks
 # BLOCKSIZE=K; export BLOCKSIZE
 #
diff --git a/etc/rc.d/initdiskless b/etc/rc.d/initdiskless
index bf49749..b8ed060 100644
--- a/etc/rc.d/initdiskless
+++ b/etc/rc.d/initdiskless
@@ -55,7 +55,7 @@
 #		for group of diskless clients, or even individual features;
 #  ${ip}	where ${ip} is the machine's assigned IP address, typically
 #		used to set host-specific features;
-#		
+#
 # Template directories are scanned in the order they are listed above,
 # with each sucessive directory overriding (merged into) the previous one;
 # non-existing directories are ignored.
diff --git a/etc/rc.initdiskless b/etc/rc.initdiskless
index bf49749..b8ed060 100644
--- a/etc/rc.initdiskless
+++ b/etc/rc.initdiskless
@@ -55,7 +55,7 @@
 #		for group of diskless clients, or even individual features;
 #  ${ip}	where ${ip} is the machine's assigned IP address, typically
 #		used to set host-specific features;
-#		
+#
 # Template directories are scanned in the order they are listed above,
 # with each sucessive directory overriding (merged into) the previous one;
 # non-existing directories are ignored.
diff --git a/etc/rc.shutdown b/etc/rc.shutdown
index ddb2797..5555f7d 100644
--- a/etc/rc.shutdown
+++ b/etc/rc.shutdown
@@ -66,7 +66,7 @@ reverse_list()
 _rcshutdown_watchdog=
 if [ -n "$rcshutdown_timeout" ]; then
 	debug "Initiating watchdog timer."
-	sleep $rcshutdown_timeout && ( 
+	sleep $rcshutdown_timeout && (
 		_msg="$rcshutdown_timeout second watchdog" \
 		    " timeout expired. Shutdown terminated."
 		logger -t rc.shutdown "$_msg"
diff --git a/etc/remote b/etc/remote
index d36dbdb..f7290f6 100644
--- a/etc/remote
+++ b/etc/remote
@@ -20,7 +20,7 @@
 #	PHONES environment variable)
 # tc	to continue a capability
 
-# Example systems 
+# Example systems
 unixshell|Unix Access:\
 	:pn=\@:tc=unix57600:
 dosbbs|DOS-based BBS:\
diff --git a/etc/rpc b/etc/rpc
index 897f5ab..935ea2f 100644
--- a/etc/rpc
+++ b/etc/rpc
@@ -30,7 +30,7 @@ bootparamd	100026	bootparam
 ypupdated	100028	ypupdate
 keyserv		100029	keyserver
 sunlink_mapper	100033
-tfsd		100037 
+tfsd		100037
 nsed		100038
 nsemntd		100039
 showfhd		100043	showfh
diff --git a/etc/termcap.small b/etc/termcap.small
index 1f2ecdc..f8a68a7 100644
--- a/etc/termcap.small
+++ b/etc/termcap.small
@@ -31,7 +31,7 @@
 #
 #	@(#)termcap.src	5.88 (Berkeley) 4/30/91
 # $FreeBSD$
-# 
+#
 # for syscons
 # common entry without semigraphics
 cons25w|ansiw|ansi80x25-raw:\