YAMF22

1 files changed, 63 insertions, 61 deletions

diff --git a/etc/rc.conf b/etc/rc.conf
index 9461c69..a0770c1 100644
--- a/etc/rc.conf
+++ b/etc/rc.conf
@@ -4,17 +4,19 @@
 # This is rc.conf - a file full of useful variables that you can set 
 # to change the default startup behavior of your system.
 #
-#	$Id: rc.conf,v 1.3 1997/04/28 07:35:37 jkh Exp $
+# All arguments must be in double or single quotes.
+#
+#	$Id: rc.conf,v 1.4 1997/04/28 10:07:21 jkh Exp $
 
 ##############################################################
 ### Important initial Boot-time options  #####################
 ##############################################################
 
-swapfile=NO		# Set to name of swapfile if aux swapfile desired.
-apm_enable=NO		# Set to YES if you want APM enabled.
-pccard_enable=NO	# Set to YES if you want to configure PCCARD devices.
-pccard_mem=DEFAULT	# If pccard_enable=YES, this is card memory address.
-pccard_ifconfig=NO	# Specialized pccard ethernet configuration (or NO).
+swapfile="NO"		# Set to name of swapfile if aux swapfile desired.
+apm_enable="NO"		# Set to YES if you want APM enabled.
+pccard_enable="NO"	# Set to YES if you want to configure PCCARD devices.
+pccard_mem="DEFAULT"	# If pccard_enable=YES, this is card memory address.
+pccard_ifconfig="NO"	# Specialized pccard ethernet configuration (or NO).
 local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d"	# startup script dirs.
 
 
@@ -23,65 +25,65 @@ local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d"	# startup script dirs.
 ##############################################################
 
 ### Basic network options: ###
-hostname=myname.my.domain	# Set this!
-nisdomainname=NO		# Set to NIS domain if using NIS (or NO).
-firewall=NO			# Set to firewall type or NO for none.
-tcp_extentions=YES		# Allow RFC1323 & RFC1544 extentions (or NO).
+hostname="myname.my.domain"	# Set this!
+nisdomainname="NO"		# Set to NIS domain if using NIS (or NO).
+firewall="NO"			# Set to firewall type or NO for none.
+tcp_extentions="YES"		# Allow RFC1323 & RFC1544 extentions (or NO).
 network_interfaces="lo0"	# List of network interfaces (lo0 is loopback).
 ifconfig_lo0="inet 127.0.0.1"	# default loopback device configuration.
 
 ### Network daemon (miscellaneous) & NFS options: ###
-syslogd_enable=YES		# Run syslog daemon (or NO).
+syslogd_enable="YES"		# Run syslog daemon (or NO).
 syslogd_flags=""		# Flags to syslogd (if enabled).
-named_enable=NO			# Run named, the DNS server (or NO).
+named_enable="NO"		# Run named, the DNS server (or NO).
 named_flags=""			# Flags to named (if enabled).
-kerberos_server_enable=NO	# Run a kerberos master server (or NO).
-rwhod_enable=NO			# Run the rwho daemon (or NO).
-amd_enable=NO			# Run amd service with $amd_flags (or NO).
+kerberos_server_enable="NO"	# Run a kerberos master server (or NO).
+rwhod_enable="NO"		# Run the rwho daemon (or NO).
+amd_enable="NO"			# Run amd service with $amd_flags (or NO).
 amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map"
-nfs_client_enable=NO		# This host is an NFS client (or NO).
-nfs_server_enable=NO		# This host is an NFS server (or NO).
-weak_mountd_authentication=NO	# Running PCNFSD / other non-root nfsd (or NO).
-nfs_reserved_port_only=NO	# Provide NFS only on secure port (or NO).
-rpc_lockd_enable=NO		# Run NFS rpc.lockd (*broken!*) if nfs_server.
-rpc_statd_enable=YES		# Run NFS rpc.statd if nfs_server (or NO).
-portmap_enable=YES		# Run the portmapper service (or NO).
+nfs_client_enable="NO"		# This host is an NFS client (or NO).
+nfs_server_enable="NO"		# This host is an NFS server (or NO).
+weak_mountd_authentication="NO"	# Running PCNFSD / other non-root nfsd (or NO).
+nfs_reserved_port_only="NO"	# Provide NFS only on secure port (or NO).
+rpc_lockd_enable="NO"		# Run NFS rpc.lockd (*broken!*) if nfs_server.
+rpc_statd_enable="YES"		# Run NFS rpc.statd if nfs_server (or NO).
+portmap_enable="YES"		# Run the portmapper service (or NO).
 portmap_flags=""		# Flags to portmap (if enabled).
-xtend_enable=NO			# Run the X-10 power controller daemon.
+xtend_enable="NO"		# Run the X-10 power controller daemon.
 xtend_flags=""			# Flags to xtend (if enabled).
 
 ### Network Time Services options: ###
-timed_enabled=NO		# Run the time daemon (or NO).
+timed_enabled="NO"		# Run the time daemon (or NO).
 timed_flags=""			# Flags to timed (if enabled).
-ntpdate_enable=NO		# Run the ntpdate to sync time (or NO).
+ntpdate_enable="NO"		# Run the ntpdate to sync time (or NO).
 ntpdate_flags=""		# Flags to ntpdate (if enabled).
-xntpd_enable=NO			# Run xntpd Network Time Protocol (or NO).
+xntpd_enable="NO"		# Run xntpd Network Time Protocol (or NO).
 xntpd_flags=""			# Flags to xntpd (if enabled).
-tickadj_enable=YES		# If xntp is enabled, also run tickadj.
+tickadj_enable="YES"		# If xntp is enabled, also run tickadj.
 tickadj_flags="-Aq"		# Flags to tickadj (if enabled).
 
 # Network Information Services (NIS) options: ###
-nis_client_enable=NO		# We're an NIS client (or NO)
+nis_client_enable="NO"		# We're an NIS client (or NO)
 nis_client_flags=""		# Flags to ypbind (if enabled).
-nis_ypset_enable=NO		# Run ypset at boot time (or NO).
+nis_ypset_enable="NO"		# Run ypset at boot time (or NO).
 nis_ypset_flags=""		# Flags to ypset (if enabled).
-nis_server_enable=NO		# We're an NIS server (or NO)
+nis_server_enable="NO"		# We're an NIS server (or NO)
 nis_server_flags=""		# Flags to ypserv (if enabled).
-nis_ypxfrd_enable=NO		# Run rpc.ypxfrd at boot time (or NO).
+nis_ypxfrd_enable="NO"		# Run rpc.ypxfrd at boot time (or NO).
 nis_ypxfrd_flags=""		# Flags to rpc.ypxfrd (if enabled).
-nis_yppasswd_enable=NO		# Run rpc.yppasswd at boot time (or NO).
+nis_yppasswd_enable="NO"	# Run rpc.yppasswd at boot time (or NO).
 nis_yppasswd_flags=""		# Flags to rpc.yppasswd (if enabled).
 
 ### Network routing options: ###
-defaultrouter=NO		# Set to default gateway (or NO).
+defaultrouter="NO"		# Set to default gateway (or NO).
 static_routes=""		# Set to static route list (or leave empty).
-gateway_enable=NO		# Set to YES if this host will be a gateway.
-router_enable=YES		# Set to YES to enable a routing daemon.
-router=routed			# Name of routing daemon to use if enabled.
-router_flags=-q			# Flags for routing daemon.
-mrouted_enable=NO		# Do multicast routing (see /etc/mrouted.conf)
-ipxgateway_enable=NO		# Set to YES to enable IPX routing.
-ipxrouted_enable=NO		# Set to YES to run the IPX routing daemon.
+gateway_enable="NO"		# Set to YES if this host will be a gateway.
+router_enable="YES"		# Set to YES to enable a routing daemon.
+router="routed"			# Name of routing daemon to use if enabled.
+router_flags="-q"		# Flags for routing daemon.
+mrouted_enable="NO"		# Do multicast routing (see /etc/mrouted.conf)
+ipxgateway_enable="NO"		# Set to YES to enable IPX routing.
+ipxrouted_enable="NO"		# Set to YES to run the IPX routing daemon.
 ipxrouted_flags=""		# Flags for IPX routing daemon.
 
 
@@ -89,19 +91,19 @@ ipxrouted_flags=""		# Flags for IPX routing daemon.
 ###  System console options  #################################
 ##############################################################
 
-keymap=NO		# keymap in /usr/share/syscons/keymaps/* (or NO).
-keyrate=NO		# keyboard rate to: slow, normal, fast (or NO).
-keybell=NO		# bell to duration.pitch or normal or visual (or NO).
-keychange=NO		# function keys default values (or NO).
-cursor=NO		# cursor type {normal|blink|destructive} (or NO).
-scrnmap=NO		# screen map in /usr/share/syscons/scrnmaps/* (or NO).
-font8x16=NO		# font 8x16 from /usr/share/syscons/fonts/* (or NO).
-font8x14=NO		# font 8x14 from /usr/share/syscons/fonts/* (or NO).
-font8x8=NO		# font 8x8 from /usr/share/syscons/fonts/* (or NO).
-blanktime=NO		# blank time (in seconds) or "NO" to turn it off.
-saver=NO		# screen saver desired: blank/green/snake/star/NO.
-mousedtype=NO		# See man page for rc.conf(8) for available settings.
-mousedport=/dev/cuaa0	# Set to your mouse port (required if mousetype set)
+keymap="NO"		# keymap in /usr/share/syscons/keymaps/* (or NO).
+keyrate="NO"		# keyboard rate to: slow, normal, fast (or NO).
+keybell="NO"		# bell to duration.pitch or normal or visual (or NO).
+keychange="NO"		# function keys default values (or NO).
+cursor="NO"		# cursor type {normal|blink|destructive} (or NO).
+scrnmap="NO"		# screen map in /usr/share/syscons/scrnmaps/* (or NO).
+font8x16="NO"		# font 8x16 from /usr/share/syscons/fonts/* (or NO).
+font8x14="NO"		# font 8x14 from /usr/share/syscons/fonts/* (or NO).
+font8x8="NO"		# font 8x8 from /usr/share/syscons/fonts/* (or NO).
+blanktime="NO"		# blank time (in seconds) or "NO" to turn it off.
+saver="NO"		# screen saver desired: blank/green/snake/star/NO.
+mousedtype="NO"		# See man page for rc.conf(8) for available settings.
+mousedport="/dev/cuaa0"	# Set to your mouse port (required if mousetype set)
 mousedflags=""		# Any additional flags to moused.
 
 
@@ -109,13 +111,13 @@ mousedflags=""		# Any additional flags to moused.
 ###  Miscellaneous administrative options  ###################
 ##############################################################
 
-lpd_enable=YES		# Run the line printer daemon
-sendmail_enable=YES	# Run the sendmail daemon (or NO).
+lpd_enable="YES"	# Run the line printer daemon
+sendmail_enable="YES"	# Run the sendmail daemon (or NO).
 sendmail_flags="-bd -q30m" # -bd is pretty mandatory
-savecore_enable=NO	# Save kernel crashdumps for debugging (or NO).
-dumpdev=NO		# Device name to crashdump to (if enabled).
-check_quotas=NO		# Check quotas (or NO).
-accounting=NO		# Turn on process accounting (or NO).
-ibcs2_enable=NO		# Ibcs2 (SCO) emulation loaded at startup (or NO).
-linux_enable=NO		# Linux emulation loaded at startup (or NO).
+savecore_enable="NO"	# Save kernel crashdumps for debugging (or NO).
+dumpdev="NO"		# Device name to crashdump to (if enabled).
+check_quotas="NO"	# Check quotas (or NO).
+accounting="NO"		# Turn on process accounting (or NO).
+ibcs2_enable="NO"	# Ibcs2 (SCO) emulation loaded at startup (or NO).
+linux_enable="NO"	# Linux emulation loaded at startup (or NO).
 rand_irqs="NO"		# Stir the entropy pool (or NO).