Reviewed by:

1 files changed, 125 insertions, 0 deletions

diff --git a/etc/ppp/ppp.conf.sample b/etc/ppp/ppp.conf.sample
new file mode 100644
index 0000000..4512c66
--- /dev/null
+++ b/etc/ppp/ppp.conf.sample
@@ -0,0 +1,125 @@
+#################################################################
+#
+#  	PPP  Sample Configuration File
+#
+#	  Written by Toshiharu OHNO
+#
+# $Id:$
+#
+#################################################################
+#
+# Default setup. Executed always when PPP is invoked.
+#
+default:
+ set device /dev/tty01
+ set speed 38400
+ disable lqr
+ deny lqr
+ set dial "ABORT BUSY ABORT NO\\sCARRIR TIMEOUT 5 \"\" AT OK-AT-OK \\dATDT\\T TIMEOUT 40 CONNECT"
+#
+# Example with login script
+#   o From PPP prompt,
+#	ppp> dial simplesite
+#     will automatically dials and perform login procedure.
+#
+#       ppp> load simplesite
+#     will also load and execute commands, but don't dial.
+#
+#   o From shell, invoke as
+#       % ppp simplesite
+#     will load commands associated with the label. Use,
+#       ppp> dial
+#     to establish the connection.
+#
+simplesite:
+ set phone 12345678
+ set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"
+ set timeout 120
+#
+# If peer reqires to use CHAP, don't forget to supply authname and authkey.
+#
+# If you'd like to use CHAP to authentificate peer, comment out the line
+# ``enable chap'' below. You also need to prepare /etc/ppp.secret.
+#
+# If remote system sends its system name within CHAP packet and it is
+# found in /etc/ppp.secret, then secret key is taken from the file and
+# value of authkey is ignored.
+#
+chapsite:
+ set phone 12345678
+ set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"
+ deny pap
+ accept chap
+# enable chap
+ set authname MySystemName
+ set authkey  OurSecretKey
+#
+# To speak PAP is just smilar to CHAP
+#
+papsite:
+ set phone 12345678
+ set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"
+ deny chap
+ accept pap
+# enable pap
+ set authname MyUserName
+ set authkey  MyPassword
+#
+# On demand dialup example
+#  Here, we assume that local side use 192.244.185.226 and
+#  remote side use 192.244.176.44 as their IP address.
+#  You must supply -auto option to invoke PPP.
+#
+#  ex. % ppp -auto ondemand
+#
+ondemand:
+ set phone 1234567
+ set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"
+ set timeout 120
+ set ifaddr 192.244.185.226 192.244.176.44
+ add 0 255.255.255.0 192.244.176.44
+#
+# Another on demand example
+#  If peer assign some IP address for us, and we can't predict it
+#  until we make a connection, use 0 as local side address.
+#
+pmdemend:
+ set phone 1234567
+ set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"
+ set timeout 120
+ set ifaddr 0 192.244.176.44
+ add 0 255.255.255.0 192.244.176.44
+#
+# Example to validate incoming user with CHAP
+#  Invod as ``ppp -direct users'' from login script. User's system name
+#  and secret-key must be registered into /etc/ppp.secret.
+#  IP address assigned to peer is registered in ppp.secret, then that
+#  value is used and value in ``ifaddr'' command has no effect.
+#
+users:
+ disable pap
+ enable chap
+ set authname ppp-server
+ set ifaddr 192.244.176.44 292.244.184.31
+#
+# Example of Callback Request
+#
+#  Here, we assume that peer will hangup the line and initiates a callback
+#  after successful authentification. We simply use chat script capabiluty
+#  and wait for a "NO CARRIRER" response from our modem.
+#
+#  % ppp callback
+#
+callback:
+ set phone 0312345678
+ set login "ABORT NO\\sCARRIER TIMEOUT 5 login:-\\r-login: MyName word: MySecret TIMEOUT 20 DUMMY"
+ set debug phase chat
+ dial
+ quit
+#
+# Example for PPP/TELNET and PPP/TCP. Read doc for further details
+#
+ppptelnet:
+ set escape 0xff
+ppptcp:
+ set device 192.244.191.33:2400