Rename files to indicate a bit better that they are just samples

1 files changed, 257 insertions, 0 deletions

diff --git a/etc/isdn/isdnd.rc.sample b/etc/isdn/isdnd.rc.sample
new file mode 100644
index 0000000..17987be
--- /dev/null
+++ b/etc/isdn/isdnd.rc.sample
@@ -0,0 +1,257 @@
+#------------------------------------------------------------------------------
+#
+#	example of a configuration file for the isdn daemon
+#	---------------------------------------------------
+#
+#	$Id: isdnd.rc,v 1.1 1999/01/10 14:30:47 hm Exp $
+#
+#	last edit-date: [Tue Jan 19 16:30:12 1999]
+#
+#	NOTICE:
+#	=======
+#	This configuration file is an EXAMPLE only and MUST be edited
+#	carefully to get the desired results!
+#
+#	Please read the "isdnd.rc" manual page (execute "man isdnd.rc")
+#	for reference !
+#
+#------------------------------------------------------------------------------
+
+#==============================================================================
+# SYSTEM section: isdnd global configuration parameters
+#==============================================================================
+system
+
+# accounting
+# ----------
+
+acctall		= on			# generate info for everything
+acctfile	= /var/log/isdnd.acct	# name & location of accounting file
+useacctfile	= yes			# generate accouting info to file
+
+# monitor
+# -------
+
+monitor-allowed	= no			# global switch: monitor on/off
+monitor-port	= 451			# default monitor TCP port
+
+# Monitor rights are granted due to the most specific host/net spec, i.e. in 
+# the example below host 192.168.1.2 will have the rights specified on that
+# line, even so it belongs to net 192.168.1.0/24 as well.
+#
+# A monitor specification may either be:
+#
+#  - the name of a local (UNIX-domain) socket; this MUST start with a "/"
+monitor		= "/var/run/isdn-monitor" 
+monitor-access	= fullcmd
+monitor-access	= channelstate, logevents
+monitor-access	= callin, callout
+#
+#  - a dotted-quad host spec
+monitor		= "192.168.1.2"
+monitor-access	= restrictedcmd, channelstate, callin, callout
+#
+#  - a dotted-quad net spec with "/len" (CIDR-style) netmask spec
+monitor		= "192.168.1.0/24"
+monitor-access	= restrictedcmd, channelstate, callin, callout
+#
+#  - a resolveable host name
+monitor		= "rumolt"
+monitor-access	= restrictedcmd, channelstate, callin, callout
+#
+#  - a resolveable net name with "/len" netmask (s.a.) appended
+monitor		= "up-vision-net/24"
+monitor-access	= restrictedcmd, channelstate, callin, callout
+
+# ratesfile
+# ---------
+
+ratesfile	= /etc/isdn/isdnd.rates	# name & location of rates file
+
+# regular expression pattern matching
+# -----------------------------------
+
+#regexpr	= "connected.*XXX"	# look for matches in log messages
+#regprog	= connectXXX		# execute program when match is found
+
+# realtime priority section
+# -------------------------
+
+rtprio		= 25			# modify isdnd's process priority
+
+#==============================================================================
+# entry section: IP over ISDN example - i call back the remote end
+#==============================================================================
+entry				
+
+name        		= I4BIP		# name for reference. This name will
+					# be used in the logfile to identfy
+					# this entry.
+
+					# the network or telephone device
+					# the data traffic should be routed to:
+usrdevicename		= ipr		# ipr, isp, tel, rbch
+usrdeviceunit		= 0		# unit number
+
+					# the ISDN controller number to be
+					# used for this entry:
+isdncontroller		= 0		# contoller to use or -1 to use any
+isdnchannel		= -1		# channel (1/2) to use or 0 or -1 for any
+
+					# incoming only, outgoing only or both:
+direction		= inout		# in, out, inout
+
+					# numbers used to verify a DIAL IN:
+local-phone-incoming	= 321		# this is my number
+remote-phone-incoming	= 0123456789	# this one can call in
+
+					# numbers used at DIAL OUT time:
+local-phone-dialout	= 321		# this is my number
+remote-phone-dialout	= 00123456789	# i call this remote number
+
+					# in case i have several remote 
+					# telephone numbers specified, this 
+					# is used to specify which one is 
+					# used next on dial fail or retry:
+remdial-handling	= first		# first, last or next
+
+					# what happenes if someone dials in:
+dialin-reaction		= callback	# accept, reject, ignore, answer, callback
+
+					# normal dialout or do i call back:
+dialout-type		= normal	# normal / calledback
+
+callbackwait		= 1		# no of secs to wait before calling back
+
+					# type of protocol on the B-channel:
+					# hdlc must be specified for IP (the
+					# ipr and isp drivers), raw must be
+					# specified for telephone answering
+b1protocol		= hdlc		# hdlc, raw
+
+					# shorthold mode and idle time 
+					# configuration:
+ratetype		= 0		# ratesfile entry to use
+unitlength		= 90		# unitlength to assume
+unitlengthsrc		= rate		# none, rate, cmdl, conf, aocd
+idletime-incoming	= 120		# incoming call idle timeout
+idletime-outgoing	= 60		# outgoing call idle timeout
+earlyhangup		= 5		# time to hangup before an expected
+					# next charging unit will occur
+
+					# retry and recovery parameters
+dialretries		= 3		# # of dial retries
+dialrandincr		= off		# random dial increment time
+recoverytime		= 5		# time to wait between 2 dial tries
+usedown			= off		# set i/f down
+downtries		= 5		# retry cycles before set down
+downtime		= 30		# time to be in down before going up
+
+#connectprog		= "ip-up"	# run /etc/isdn/ip-up when an interface
+					# has established its network connection.
+					# example parameters are:
+					# /etc/isdn/ip-up -d isp0 -f up -a 192.110.12.14
+#disconnectprog		= "ip-down"	# like connectprog, but run after the connection
+					# is closed (ISDN layer down). The actual
+					# interface address might not be known
+					# any more. example parameters are:
+					# /etc/isdn/ip-up -d isp0 -f down -a 0.0.0.0
+
+#==============================================================================
+# entry section: IP over ISDN example - i am called back by the remote end
+#==============================================================================
+entry				
+                                
+name        		= I4BIP1	# name for reference
+				
+usrdevicename		= ipr		# ipr, tel, rbch
+usrdeviceunit		= 1		# unit number
+				
+isdncontroller		= 0		# contoller to use or -1 to use any
+isdnchannel		= -1		# channel (1/2) to use or 0 or -1 for any
+
+					# numbers used to DIAL OUT
+remote-phone-dialout	= 00401234567	# remote number to dial 
+local-phone-dialout	= 38		# our number to tell remote
+
+					# numbers used to verify at DIAL IN
+local-phone-incoming	= 38		# we take calls for this local number
+remote-phone-incoming	= 00401234567	# we take calls from this remote machine
+
+b1protocol		= hdlc		# hdlc, raw
+
+ratetype		= 0		# city
+unitlength		= 90		# default unit length
+earlyhangup		= 5		# safety zone
+unitlengthsrc		= aocd		# none, rate, cmdl, conf, aocd
+				
+dialin-reaction		= accept	# accept, reject, ignore, anwer, callback
+
+dialout-type		= calledback	# normal or calledback
+
+dialretries		= 3
+recoverytime		= 3
+calledbackwait		= 20
+dialrandincr		= off
+
+usedown			= off
+downtries		= 2
+downtime		= 30
+
+idletime-incoming	= 300
+idletime-outgoing	= 30
+
+#==============================================================================
+# entry section: answering machine example
+#==============================================================================
+entry				
+
+name        		= I4BTEL	# name for reference
+usrdevicename		= tel		# ipr, tel, rbch
+usrdeviceunit           = 0             # unit number
+				
+isdncontroller		= 0		# contoller to use or -1 to use any
+isdnchannel		= -1		# channel (1/2) to use or 0 or -1 for any
+
+					# numbers used to verify at DIAL IN
+local-phone-incoming	= 456		# this is my number
+remote-phone-incoming	= *		# anyone can call in
+				
+dialin-reaction		= answer	# accept, reject, ignore, answer
+
+answerprog		= answer	# program to run
+
+b1protocol		= raw		# hdlc, raw
+
+idletime-incoming	= 5		# 5 seconds idle timeout
+
+#=======================================================================
+# entry section: PPP example
+#======================================================================
+entry
+name			= I4BPPP
+usrdevicename		= isp	
+usrdeviceunit		= 0
+isdncontroller  	= 0
+isdnchannel		= -1
+local-phone-incoming	= 1234	
+remote-phone-incoming	= 5678
+local-phone-dialout	= 1234
+remote-phone-dialout	= 5678	
+remdial-handling	= first
+dialin-reaction		= accept
+dialout-type		= normal
+b1protocol		= hdlc
+idletime-incoming	= 240
+idletime-outgoing	= 30
+ratetype		= 0  
+unitlength		= 90
+unitlengthsrc		= rate
+dialretries		= 3
+dialrandincr		= on
+recoverytime		= 25
+usedown			= off
+downtries		= 2
+downtime		= 30
+
+# EOF #########################################################################