Use a common MAKEDEV between the Alpha and i386 - the only differences

of significance were due to the Alpha version going stale.  We use common
device numbering for devices.  Hopefully, this file's days are numbered.

1 files changed, 0 insertions, 1442 deletions

diff --git a/etc/etc.i386/MAKEDEV b/etc/etc.i386/MAKEDEV
deleted file mode 100644
index 5e26cc1..0000000
--- a/etc/etc.i386/MAKEDEV
+++ /dev/null
@@ -1,1442 +0,0 @@
-#!/bin/sh -
-#
-# Copyright (c) 1990 The Regents of the University of California.
-# All rights reserved.
-#
-# Written and contributed by W. Jolitz 12/90
-#
-# Redistribution and use in source and binary forms are permitted provided
-# that: (1) source distributions retain this entire copyright notice and
-# comment, and (2) distributions including binaries display the following
-# acknowledgement:  ``This product includes software developed by the
-# University of California, Berkeley and its contributors'' in the
-# documentation or other materials provided with the distribution and in
-# all advertising materials mentioning features or use of this software.
-# Neither the name of the University nor the names of its contributors may
-# be used to endorse or promote products derived from this software without
-# specific prior written permission.
-# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-#
-#	@(#)MAKEDEV	5.2 (Berkeley) 6/22/90
-#
-# Device "make" file.  Valid arguments:
-#	all	makes all known devices, standard number of units (or close)
-#	std	standard devices
-#	jail	suitable for a jail(8)
-#	local	configuration specific devices
-#	mach-4	mach4&lites+devices for Mach's XFree86 distribution
-#	(see http://www.cs.hut.fi/lites.html for more info on LITES)
-#
-# Tapes:
-#	wt*	QIC-interfaced (e.g. not SCSI) 3M cartridge tape
-#	sa*	SCSI Sequential Access Devices
-#	ft*	QIC-40/QIC-80 3M cartridge tape (interfaced
-#		via the floppy disk controller)
-#
-# Disks:
-#	acd*	ATAPI CD-ROM disks
-#	amrd*   AMI MegaRAID
-#	cd*	SCSI CD-ROM disks
-#	da*	SCSI Direct Access Devices
-#	fd*	floppy disk drives (3 1/2", 5 1/4")
-#	fla*	M-Systems DiskOnChip
-#	ida*	Compaq Smart-2 RAID
-#	matcd*	Matsushita (Panasonic) CD-ROM disks
-#	mcd*	Mitsumi CD-ROM disks
-#	md*	Memory (or malloc) disk
-#	mlxd*   Mylex DAC960 RAID
-#	scd*	Sony CD-ROM disks
-#	sd*	SCSI disk, antiquated, use da* instead
-#	vn*	vnode disks
-#	wd*	"Winchester" disk drives (ST506,IDE,ESDI,RLL,...)
-#	wfd*	IDE floppy disk drives (LS-120)
-#
-# Console ports:
-#	vty*	virtual console devices for syscons/pcvt/codrv
-#
-# Pointing devices:
-#	mse*	Logitech and ATI Inport bus mouse
-#	psm*	PS/2 mouse
-#	sysmouse Mousesystems mouse emulator for syscons
-#
-# Time devices:
-#	refclock-*  serial ports used by xntpd parse refclocks
-#
-# Terminal ports:
-#	tty*	general purpose serial ports
-#	cua*	dialout serial ports
-#	ttyA*	Specialix SI/XIO dialin ports ('*' = number of devices)
-#	cuaA*	Specialix SI/XIO dialout ports
-#	ttyD*	Digiboard - 16 dialin ports
-#	cuaD*	Digiboard - 16 dialout ports
-#	ttyR*	Rocketport dialin ports
-#	cuaR*	Rocketport dialout ports
-#
-# Pseudo terminals:
-#	pty*	set of 32 master and slave pseudo terminals
-#	vty*	virtual terminals using syscons/pcvt/codrv console
-#
-# Parallel port:
-#	lpt*	Printer
-#	ppi*	Parallel port i/o
-#	pps*	Pulse per second timing interface
-#
-# I2C and SMBus:
-#	iic*	I2C devices
-#	smb*	SMBUS devices
-#
-# USB devices:
-#	usb*	USB bus control device
-#	ums*	mouse
-#	ulpt*	printer
-#	ugen*	generic USB device
-#
-# SCSI devices (other than CD-ROM, tape and disk):
-#	ch*	SCSI Media-Changer (juke box) driver
-#	ssc	The ``super scsi'' device
-#	worm*	WORM driver
-#	pt*	Processor Type (HP scanner, as one example)
-#	pass*	CAM Passthrough device
-#
-# PC-CARD (previously called PCMCIA) support
-#	card*	PC-CARD slots
-#
-# ISDN devices:
-#	i4b	isdnd call control device
-#	i4bctl	debugging control device
-#	i4btrc* trace data interface(s), one per passive card
-#	i4btel* telephony interface(s)
-#	i4bteld* telephony dialout interface(s)
-#	i4brbch* raw b channel access device(s)
-#
-# Special purpose devices:
-#	apm	Advanced Power Management BIOS
-#	apmctl	APM BIOS control device
-#	bpf*	packet filter
-#	speaker	pc speaker
-#	tw*	xten power controller
-#	snd*	various sound cards
-#	pcaudio PCM audio driver
-#	socksys iBCS2 socket system driver
-#	vat	VAT compatibility audio driver (requires snd*)
-#	gsc	Genius GS-4500 hand scanner
-#	joy	pc joystick
-#	tun*	Tunneling IP device
-#	snp*	tty snoop devices
-#	spigot	Video Spigot video acquisition card
-#	ctx*    Cortex-I video acquisition card
-#	meteor*	Matrox Meteor video acquisition card (pci)
-#	bktr*	Bt848 based video acquisition card (pci)
-#	labpc*	National Instrument's Lab-PC and LAB-PC+
-#	perfmon	CPU performance-monitoring counters
-#	pci	PCI configuration-space access from user mode
-#	kbd	keyboard devices
-#
-# $FreeBSD$
-#
-
-PATH=/sbin:/bin/:/usr/bin:/usr/sbin:$PATH
-umask 77
-
-# Usage: die exitcode msg
-die() {
-	echo $2
-	exit $1
-}
-
-# Convert integer to partition name
-dkitop() {
-	local p
-
-	case $1 in
-	0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;;
-	*) p="?";;
-	esac
-	echo $p
-}
-
-# Convert integer to slice name
-dkitos() {
-	local s
-
-	case $1 in
-	0) s="";;
-	1) s="";;
-	*) s=s$(($1-1));;
-	esac
-	echo $s
-}
-
-# Convert disk (type, unit, slice, partition) to minor number
-dkminor()
-{
-	echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | $4))
-}
-
-# Override mknod(2) to add extra handling to it.
-mknod() {
-	rm -f "$1" || exit 1
-	/sbin/mknod "$@" || die 2 "/sbin/mknod $@ failed"
-	chown root:wheel "$1" || exit 1
-}
-
-# Convert tape (ctrl, unit, mode, access) to minor number
-saminor()
-{
-	echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4))
-}
-
-# Convert the last character of a tty name to a minor number.
-ttyminor()
-{
-	case $unit in
-	[0-9]) m=$unit;;
-	a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;;
-	h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;;
-	o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;;
-	v) m=31;;
-	*) m="?";;
-	esac
-	echo $m
-}
-
-# Raw partition for disks
-dkrawpart=2
-
-# Compatibility slice for disks
-dkcompatslice=0
-
-# Raw slice for disks
-dkrawslice=1
-
-# Standard umasks
-disk_umask=037			# allow group operator to read disks
-tape_umask=017			# allow group operator to read/write tapes
-
-for i in $*; do
-case $i in
-
-all)
-	sh MAKEDEV std					# standard
-	sh MAKEDEV fd0 fd1				# bdev, floppy disk
-	sh MAKEDEV da0 da1 da2 da3 			# bdev, SCSI disk
-	sh MAKEDEV ad0 ad1 ad2 ad3 			# bdev, ATA disk
-	sh MAKEDEV acd0 afd0 ast0			# bdev, ATAPI devices
-	sh MAKEDEV wd0 wd1 wd2 wd3			# bdev, OLD disk
-	sh MAKEDEV wcd0 wfd0 wst0			# bdev, OLD ATAPI devs
-	sh MAKEDEV vn0					# bdev, virtual disk
-	sh MAKEDEV cd0 matcd0 mcd0 scd0			# bdev, cdrom
-	sh MAKEDEV ft0 sa0 wt0				# bdev, tape
-	sh MAKEDEV vty12				# cdev, virtual tty
-	sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3		# cdev, serial tty
-	sh MAKEDEV pty0					# cdev, pseudo tty
-	sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3		# cdev, serial tty
-	sh MAKEDEV kbd0					# cdev, keyboard
-	sh MAKEDEV mse0 psm0 sysmouse			# cdev, mouse
-	sh MAKEDEV pcaudio speaker			# cdev, noise
-	sh MAKEDEV lpt0 lpt1 lpt2			# cdev, printer
-	sh MAKEDEV ppi0 ppi1 ppi2			# cdev, parallel port
-	sh MAKEDEV iic0 iic1				# cdev, I2C device
-	sh MAKEDEV smb0 smb1				# cdev, SMBus device
-	sh MAKEDEV usb usb0 ums0 ulpt0 ugen0		# cdev, USB devices
-	sh MAKEDEV bpf0 tun0				# cdev, network
-	sh MAKEDEV ch0 perfmon tw0			# cdev, miscellaneous
-	sh MAKEDEV apm apmctl card0 card1 card2 card3	# cdev, laptop
-	sh MAKEDEV pass4 xpt2				# cdev, CAM
-	sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1		# cdev, ISDN
-	sh MAKEDEV i4btel0 i4btel1 i4bteld0 i4bteld1	# cdev, ISDN
-	sh MAKEDEV i4brbch0 i4brbch1			# cdev, ISDN
-	;;
-
-std)
-	mknod console	c 0 0;	chmod 600 console
-	mknod drum	c 4 0;	chmod 640 drum;		chgrp kmem drum
-	mknod kmem	c 2 1;	chmod 640 kmem;		chgrp kmem kmem
-	mknod mem	c 2 0;	chmod 640 mem;		chgrp kmem mem
-	mknod null	c 2 2;	chmod 666 null
-	mknod random	c 2 3;	chmod 644 random
-	mknod urandom	c 2 4;	chmod 644 urandom
-	mknod zero	c 2 12;	chmod 666 zero
-	mknod io	c 2 14;	chmod 600 io
-	mknod tty	c 1 0;	chmod 666 tty
-	mknod klog	c 7 0;	chmod 600 klog
-	mknod stdin	c 22 0; chmod 666 stdin
-	mknod stdout	c 22 1; chmod 666 stdout
-	mknod stderr	c 22 2; chmod 666 stderr
-	mknod pci	c 78 0; chmod 644 pci
-	mkdir -p fd
-	(cd fd && eval `echo "" | awk ' BEGIN { \
-		for (i = 0; i < 64; i++) \
-			printf("mknod %d c 22 %d;", i, i)}'`)
-	chown -R root:wheel fd
-	chmod 555 fd
-	chmod 666 fd/*
-	;;
-
-jail)
-	sh MAKEDEV std pty0
-	rm mem kmem drum pci io klog	# for security
-	ln -sf null mem			# for libkvm (ab)users
-	ln -sf null kmem		# --//--
-	ln -sf null drum		# --//--
-	;;
-
-mach-4)
-	mknod iopl c 22 0
-	mknod kbd c 23 0
-	mknod mouse c 24 0
-	mknod time c 25 0
-	mknod timezone c 26 0
-	;;
-
-# Create device files for new Archive/Wangtek QIC-02 tape driver (vak)
-wt*)
-	umask $tape_umask
-	u=`expr $i : '..\(.*\)'`
-	if [ -z "${u}" ]; then u=0; fi
-	mknod rwt${u}   c 10 `expr  0 + $u`	# default density, 512b blocks
-	mknod nrwt${u}  c 10 `expr  4 + $u`
-#	mknod rWt${u}   c 10 `expr 64 + $u`	# default density, 1024b blocks
-#	mknod nrWt${u}  c 10 `expr 68 + $u`
-	mknod rwt${u}b  c 10 `expr 16 + $u`	# 60 megabytes
-	mknod nrwt${u}b c 10 `expr 20 + $u`
-	mknod rwt${u}c  c 10 `expr 24 + $u`	# 120 megabytes
-	mknod nrwt${u}c c 10 `expr 28 + $u`
-	mknod rwt${u}d  c 10 `expr 32 + $u`	# 150 megabytes
-	mknod nrwt${u}d c 10 `expr 36 + $u`
-#	mknod rwt${u}e  c 10 `expr 40 + $u`	# 300 megabytes?
-#	mknod nrwt${u}e c 10 `expr 44 + $u`
-#	mknod rwt${u}f  c 10 `expr 48 + $u`	# 600 megabytes?
-#	mknod nrwt${u}f c 10 `expr 52 + $u`
-	chgrp operator r[Ww]t$u nr[Ww]t$u r[Ww]t$u[a-f] nr[Ww]t$u[a-f]
-	umask 77
-	;;
-
-# Individual slices.
-ad*s*|afd*s*|amrd*s*|da*s*|fla*s*|ida*s*|md*s*|mlxd*s*|sd*s*|vn*s*|wd*s*|wfd*s*)
-	umask $disk_umask
-	case $i in
-	ad*s*) name=ad; blk=30; chr=116;;
-	afd*s*) name=afd; blk=32; chr=118;;
-	amrd*s*) name=amrd; blk=35; chr=133;;
-	da*s*) name=da; blk=4;  chr=13;;
-	fla*s*) name=fla; blk=28; chr=102;;
-	ida*s*) name=ida; blk=29; chr=109;;
-	md*s*) name=md; blk=22;  chr=95;;
-	mlxd*s*) name=mlxd; blk=27; chr=131;;
-	sd*s*) name=sd; blk=4;  chr=13;;
-	vn*s*) name=vn; blk=15; chr=43;;
-	wd*s*) name=wd; blk=0;  chr=3;;
-	wfd*s*) name=wfd; blk=1; chr=87;;
-	esac
-	case $i in
-	amrd*s*|mlxd*s*)
-		unit=`expr $i : '....\([0-9]*\)s'`
-		slice=`expr $i : '....[0-9]*s\([0-9]*\)'`
-		part=`expr $i : '....[0-9]*s[0-9]*\(.*\)'`
-		;;
-	afd*s*|fla*s*|ida*s*|wfd*s*)
-		unit=`expr $i : '...\([0-9]*\)s'`
-		slice=`expr $i : '...[0-9]*s\([0-9]*\)'`
-		part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'`
-		;;
-	*)
-		unit=`expr $i : '..\([0-9]*\)s'`
-		slice=`expr $i : '..[0-9]*s\([0-9]*\)'`
-		part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'`
-		;;
-	esac
-	case $unit in
-	[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
-		case $slice in
-		[0-9]|[1-2][0-9]|30)
-			oldslice=$slice
-			slice=$(($slice+1))
-			slicename=`dkitos $slice`
-			minor=`dkminor 0 $unit $slice $dkrawpart`
-			mknod  $name$unit$slicename b $blk $minor
-			mknod r$name$unit$slicename c $chr $minor
-			case $part in
-			[a-h])
-				case $oldslice in
-				0) slice=$oldslice ;;
-				esac
-				for part in 0 1 2 3 4 5 6 7
-				do
-					minor=`dkminor 0 $unit $slice $part`
-					partname=`dkitop $part`
-					mknod  $name$unit$slicename$partname \
-					      b $blk $minor
-					mknod r$name$unit$slicename$partname \
-					      c $chr $minor
-				done
-				;;
-			"")
-				;;
-			*)
-				echo bad partition for disk in: $i
-				;;
-			esac
-			chgrp operator $name$unit$slicename* \
-				      r$name$unit$slicename*
-			;;
-		*)
-			echo bad slice for disk in: $i
-			;;
-		esac
-		;;
-	*)
-		echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)"
-		;;
-	esac
-	umask 77
-	;;
-
-fd*)
-	umask $disk_umask
-	unit=`expr $i : '..\(.*\)'`
-	name=fd; blk=2; chr=9
-	case $unit in
-	0|1|2|3)
-		mknod ${name}${unit}   b $blk `expr $unit '*' 64`
-		mknod r${name}${unit}  c $chr `expr $unit '*' 64`
-		# Fake BSD partitions
-		for i in a b c d e f g h
-		do
-			ln -f ${name}${unit} ${name}${unit}$i
-			ln -f r${name}${unit} r${name}${unit}$i
-		done
-		# User-readable and programmer-readable name sets
-
-		mknod ${name}${unit}.1720  b $blk `expr $unit '*' 64 + 1`
-		mknod r${name}${unit}.1720 c $chr `expr $unit '*' 64 + 1`
-		# ln -f ${name}${unit}.1720 ${name}${unit}135hs21
-		# ln -f r${name}${unit}.1720 r${name}${unit}135hs21
-
-		mknod ${name}${unit}.1480  b $blk `expr $unit '*' 64 + 2`
-		mknod r${name}${unit}.1480 c $chr `expr $unit '*' 64 + 2`
-		# ln -f ${name}${unit}.1480 ${name}${unit}135hs18
-		# ln -f r${name}${unit}.1480 r${name}${unit}135hs18
-		# ln -f ${name}${unit}.1480 ${name}${unit}96hs18
-		# ln -f r${name}${unit}.1480 r${name}${unit}96hs18
-
-		mknod ${name}${unit}.1440  b $blk `expr $unit '*' 64 + 3`
-		mknod r${name}${unit}.1440 c $chr `expr $unit '*' 64 + 3`
-		# ln -f ${name}${unit}.1440 ${name}${unit}135
-		# ln -f r${name}${unit}.1440 r${name}${unit}135
-		# ln -f ${name}${unit}.1440 ${name}${unit}135ds18
-		# ln -f r${name}${unit}.1440 r${name}${unit}135ds18
-		# ln -f ${name}${unit}.1440 ${name}${unit}96ds18
-		# ln -f r${name}${unit}.1440 r${name}${unit}96ds18
-
-		mknod ${name}${unit}.1200  b $blk `expr $unit '*' 64 + 4`
-		mknod r${name}${unit}.1200 c $chr `expr $unit '*' 64 + 4`
-		# ln -f ${name}${unit}.1200 ${name}${unit}96
-		# ln -f r${name}${unit}.1200 r${name}${unit}96
-		# ln -f ${name}${unit}.1200 ${name}${unit}96ds15
-		# ln -f r${name}${unit}.1200 r${name}${unit}96ds15
-		# ln -f ${name}${unit}.1200 ${name}${unit}135ds15
-		# ln -f r${name}${unit}.1200 r${name}${unit}135ds15
-
-		mknod ${name}${unit}.820  b $blk `expr $unit '*' 64 + 5`
-		mknod r${name}${unit}.820 c $chr `expr $unit '*' 64 + 5`
-		# ln -f ${name}${unit}.820 ${name}${unit}96hs10
-		# ln -f r${name}${unit}.820 r${name}${unit}96hs10
-		# ln -f ${name}${unit}.820 ${name}${unit}135hs10
-		# ln -f r${name}${unit}.820 r${name}${unit}135hs10
-
-		mknod ${name}${unit}.800  b $blk `expr $unit '*' 64 + 6`
-		mknod r${name}${unit}.800 c $chr `expr $unit '*' 64 + 6`
-		# ln -f ${name}${unit}.800 ${name}${unit}96ds10
-		# ln -f r${name}${unit}.800 r${name}${unit}96ds10
-		# ln -f ${name}${unit}.800 ${name}${unit}135ds10
-		# ln -f r${name}${unit}.800 r${name}${unit}135ds10
-
-		mknod ${name}${unit}.720  b $blk `expr $unit '*' 64 + 7`
-		mknod r${name}${unit}.720 c $chr `expr $unit '*' 64 + 7`
-		# ln -f ${name}${unit}.720 ${name}${unit}96ds9
-		# ln -f r${name}${unit}.720 r${name}${unit}96ds9
-		# ln -f ${name}${unit}.720 ${name}${unit}135ds9
-		# ln -f r${name}${unit}.720 r${name}${unit}135ds9
-
-		mknod ${name}${unit}.360  b $blk `expr $unit '*' 64 + 8`
-		mknod r${name}${unit}.360 c $chr `expr $unit '*' 64 + 8`
-		# ln -f ${name}${unit}.360 ${name}${unit}48
-		# ln -f r${name}${unit}.360 r${name}${unit}48
-		# ln -f ${name}${unit}.360 ${name}${unit}48ds9
-		# ln -f r${name}${unit}.360 r${name}${unit}48ds9
-
-		chgrp operator ${name}${unit}* r${name}${unit}*
-		;;
-	*)
-		echo bad unit for disk in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-ft*)
-	umask $tape_umask
-	unit=`expr $i : '..\(.*\)'`
-	name=ft; blk=2; chr=9
-	case $unit in
-	0|1|2|3)
-		mknod ${name}${unit}   b $blk `expr $unit '*' 64 + 32`
-		mknod r${name}${unit}  c $chr `expr $unit '*' 64 + 32`
-		ln -f ${name}${unit} ${name}${unit}a
-		ln -f r${name}${unit} r${name}${unit}a
-		chgrp operator ${name}${unit}* r${name}${unit}*
-		;;
-	*)
-		echo bad unit for tape in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-ad*|afd*|amrd*|da*|fla*|ida*|md*|mlxd*|od*|sd*|vn*|wd*|wfd*)
-	umask $disk_umask
-	case $i in
-	ad*) name=ad; blk=30; chr=116;;
-	afd*) name=afd; blk=32; chr=118;;
-	amrd*) name=amrd; blk=35; chr=133;;
-	da*) name=da; blk=4;  chr=13;;
-	fla*) name=fla; blk=28; chr=102;;
-	ida*) name=ida; blk=29; chr=109;;
-	md*) name=md; blk=22; chr=95;;
-	mlxd*) name=mlxd; blk=27; chr=131;;
-	od*) name=od; blk=4; chr=13;;
-	sd*) name=sd; blk=4; chr=13;;
-	vn*) name=vn; blk=15; chr=43;;
-	wd*) name=wd; blk=0;  chr=3;;
-	wfd*) name=wfd; blk=1; chr=87;;
-	esac
-	case $i in
-	amrd*|mlxd*)
-		unit=`expr $i : '....\(.*\)'`
-		;;
-	afd*|fla*|ida*|wfd*)
-		unit=`expr $i : '...\(.*\)'`
-		;;
-	*)
-		unit=`expr $i : '..\(.*\)'`
-		;;
-	esac
-	case $unit in
-	[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
-		for slicepartname in s0h s1 s2 s3 s4
-		do
-			sh MAKEDEV $name$unit$slicepartname
-		done
-		;;
-	*)
-		echo bad unit for disk in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-ccd*)
-	umask $disk_umask
-	name=ccd
-	blk=21; chr=74
-	unit=`expr $i : '...\(.*\)'`
-	case $unit in
-	[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
-		for part in 0 1 2 3 4 5 6 7
-		do
-			minor=`dkminor 0 $unit 0 $part`
-			partname=`dkitop $part`
-			mknod  $name$unit$partname b $blk $minor
-			mknod r$name$unit$partname c $chr $minor
-		done
-		chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h]
-		;;
-	*)
-		echo bad unit for disk in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-ssc*)
-	mknod ssc c 49 0
-	;;
-
-# SCSI processor type driver
-pt[0-9]*)
-	chr=61
-	name=pt
-	unit=`expr $i : 'pt\([0-9][0-9]*\)'`
-	if [ -z "${unit}" ]; then
-		unit=0
-	fi
-	unit=`expr $unit + 1 - 1`
-	mknod ${name}${unit} c $chr $unit
-	;;
-
-# SCSI target mode sample driver
-targ[0-9]*)
-	chr=65
-	name=targ
-	unit=`expr $i : 'targ\([0-9][0-9]*\)'`
-	if [ -z "${unit}" ]; then
-		unit=0
-	fi
-	unit=`expr $unit + 1 - 1`
-	mknod ${name}${unit} c $chr $unit
-	mknod ${name}.ctl c $chr 0xffff00ff
-	;;
-
-# CAM transport layer device
-xpt*)
-	umask 077
-	# This major number is temporary
-	chr=104
-	name=xpt
-	units=`expr $i : 'xpt\(.*\)'`
-	if [ -z "${units}" ]; then
-		units=1
-	fi
-	eval `echo ${chr} ${units} ${name} |awk \
-		'{ c=$1; n=$2; name=$3;} END {
-		for (i = 0; i < n; i++)
-			printf("rm -f %s%d r%s%d; mknod %s%d c %d %d; \
-				chgrp operator %s%d;", \
-				name, i, name, i, name, i, c, i, \
-				name, i); }'`
-	;;
-# CAM passthrough device
-pass*|uk*)
-	umask 077
-	# This major number is temporary
-	chr=31
-	name=pass
-	units=`expr $i : 'pass\(.*\)'`
-	if [ -z "${units}" ]; then
-		units=1
-	fi
-	eval `echo ${chr} ${units} ${name} |awk \
-		'{ c=$1; n=$2; name=$3;} END {
-		for (i = 0; i < n; i++)
-			printf("rm -f %s%d r%s%d; mknod %s%d c %d %d; \
-				chgrp operator %s%d;", \
-				name, i, name, i, name, i, c, i, \
-				name, i); }'`
-	;;
-pty*)
-	class=`expr $i : 'pty\(.*\)'`
-	case $class in
-	0) offset=0 name=p;;
-	1) offset=32 name=q;;
-	2) offset=64 name=r;;
-	3) offset=96 name=s;;
-# Note that xterm (at least) only look at p-s.
-	4) offset=128 name=P;;
-	5) offset=160 name=Q;;
-	6) offset=192 name=R;;
-	7) offset=224 name=S;;
-	# This still leaves [tuTU].
-	*) echo bad unit for pty in: $i;;
-	esac
-	case $class in
-	0|1|2|3|4|5|6|7)
-		umask 0
-		eval `echo $offset $name | awk ' { b=0+$1; n=$2 } END { \
-			for (i = 0; i < 32; i++) {
-				c = substr("0123456789abcdefghijklmnopqrstuv", i + 1, 1); \
-				printf("mknod tty%s%s c 5 %d; \
-					mknod pty%s%s c 6 %d;", \
-					n, c, b+i, \
-					n, c, b+i); \
-			} \
-		}'`
-		umask 77
-		;;
-	esac
-	;;
-
-sa*)
-	umask $tape_umask
-	unit=`expr $i : '..\(.*\)'`
-	chr=14
-
-	case $unit in
-	[0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9])
-		mknod rsa${unit}.ctl c $chr `saminor 1 ${unit} 0 0`
-		for m in 0 1 2 3
-		do
-			mknod rsa${unit}.${m} c $chr `saminor 0 ${unit} ${m} 0`
-			mknod nrsa${unit}.${m} c $chr `saminor 0 ${unit} ${m} 1`
-			mknod ersa${unit}.${m} c $chr `saminor 0 ${unit} ${m} 2`
-			chgrp operator rsa${unit}.${m} nrsa${unit}.${m} \
-				ersa${unit}.${m}
-		done
-		ln -f rsa${unit}.0 rsa${unit}
-		ln -f nrsa${unit}.0 nrsa${unit}
-		ln -f ersa${unit}.0 ersa${unit}
-		;;
-	*)
-		echo bad unit for tape in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-ch*)
-	umask 37
-	unit=`expr $i : '..\(.*\)'`
-	case $i in
-	ch*) name=ch;  chr=17;;
-	esac
-	case $unit in
-	0|1|2|3|4|5|6)
-		mknod ${name}${unit}	c $chr $unit
-		chgrp operator ${name}${unit}
-		;;
-	*)
-		echo bad unit for media changer in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-ast*)
-	umask 2 ;
-	unit=`expr $i : '...\(.*\)'`
-	chr=119
-	case $unit in
-	0|1|2|3)
-		mknod rast${unit} c $chr `expr $unit '*' 8 + 0`
-		chgrp operator rast${unit}
-		chmod 640 rast${unit}
-		mknod nrast${unit} c $chr `expr $unit '*' 8 + 1`
-		chgrp operator nrast${unit}
-		chmod 640 nrast${unit}
-		;;
-	*)
-		echo bad unit for tape in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-acd*|cd*|mcd*|scd*)
-	umask $disk_umask
-	case $i in
-	acd*) units=`expr $i : '...\(.*\)'`; name=acd; blk=31; chr=117;;
-	cd*) units=`expr $i : '..\(.*\)'`; name=cd; blk=6; chr=15;;
-	mcd*) units=`expr $i : '...\(.*\)'`; name=mcd; blk=7; chr=29;;
-	scd*) units=`expr $i : '...\(.*\)'`; name=scd; blk=16; chr=45;;
-	esac
-	if [ -z "${units}" -o "${units}" -le 0 ]; then
-		units=1
-	fi
-	if [ "${units}" -le 31 ]; then
-		eval `echo ${chr} ${blk} ${units} ${name} |awk \
-			'{ c=$1; b=$2; n=$3; name=$4;} END{
-			for (i = 0; i < n; i++){
-				printf("rm -f %s%d* r%s%d*; \
-					mknod %s%da b %d %d; \
-					mknod %s%dc b %d %d; \
-					mknod r%s%da c %d %d; \
-					mknod r%s%dc c %d %d; \
-					chgrp operator %s%d* r%s%d*;",
-					name, i, name, i,
-					name, i, b, (i * 8),
-					name, i, b, (i * 8) + 2,
-					name, i, c, (i * 8),
-					name, i, c, (i * 8) + 2,
-					name, i, name, i); }}'`
-	else
-		echo "$i is invalid -- can't have more than 32 cd devices"
-	fi
-	umask 77
-	;;
-
-matcd*)
-	umask 2
-	case $i in
-	matcd*) unit=`expr $i : '.....\(.*\)'`; name=matcd; blk=17; chr=46;;
-	esac
-	case $unit in
-	0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15)
-		mknod ${name}${unit}a	b $blk `expr $unit '*' 8 + 0`
-		mknod ${name}${unit}c   b $blk `expr $unit '*' 8 + 2`
-		mknod r${name}${unit}a	c $chr `expr $unit '*' 8 + 0`
-		mknod r${name}${unit}c  c $chr `expr $unit '*' 8 + 2`
-		chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h]
-		chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h]
-
-		mknod ${name}${unit}la  b $blk `expr $unit '*' 8 + 128`
-		mknod ${name}${unit}lc  b $blk `expr $unit '*' 8 + 130`
-		mknod r${name}${unit}la c $chr `expr $unit '*' 8 + 128`
-		mknod r${name}${unit}lc c $chr `expr $unit '*' 8 + 130`
-		chgrp operator ${name}${unit}l[a-h] r${name}${unit}l[a-h]
-		chmod 640 ${name}${unit}l[a-h] r${name}${unit}l[a-h]
-		;;
-	*)
-		echo bad unit for disk in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-wcd*)
-	umask 2 ;
-	unit=`expr $i : '...\(.*\)'`
-	blk=19
-	chr=69
-	case $unit in
-	0|1|2|3|4|5|6|7)
-		mknod wcd${unit}a  b $blk `expr $unit '*' 8 + 0`
-		mknod rwcd${unit}a c $chr `expr $unit '*' 8 + 0`
-		mknod wcd${unit}c  b $blk `expr $unit '*' 8 + 2`
-		mknod rwcd${unit}c c $chr `expr $unit '*' 8 + 2`
-		chgrp operator wcd${unit}[a-h] rwcd${unit}[a-h]
-		chmod 640 wcd${unit}[a-h] rwcd${unit}[a-h]
-		;;
-	*)
-		echo bad unit for disk in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-wst*)
-	umask 2 ;
-	unit=`expr $i : '...\(.*\)'`
-	chr=90
-	case $unit in
-	0|1|2|3)
-		mknod rwst${unit} c $chr `expr $unit '*' 8 + 0`
-		chgrp operator rwst${unit}
-		chmod 640 rwst${unit}
-		;;
-	esac
-	umask 77
-	;;
-
-iic*)
-	unit=`expr $i : 'iic\(.*\)'`
-	mknod iic$unit c 105 $unit
-	;;
-
-smb*)
-	unit=`expr $i : 'smb\(.*\)'`
-	mknod smb$unit c 106 $unit
-	;;
-
-ppi*)
-	unit=`expr $i : 'ppi\(.*\)'`
-	mknod ppi$unit c 82 $unit
-	;;
-
-pps*)
-	unit=`expr $i : 'pps\(.*\)'`
-	mknod pps$unit c 89 $unit
-	;;
-
-usb)
-	mknod usb$unit c 108 255
-	;;
-
-usb*)
-	unit=`expr $i : 'usb\(.*\)'`
-	mknod usb$unit c 108 $unit
-	;;
-
-ums*)
-	unit=`expr $i : 'ums\(.*\)'`
-	mknod ums$unit c 111 $unit
-	;;
-
-ulpt*)
-	unit=`expr $i : 'ulpt\(.*\)'`
-	mknod ulpt$unit c 113 $unit
-	;;
-
-ugen*)
-	unit=`expr $i : 'ugen\([0-9][0-9]*\)'`
-	endpoint=`expr $i : 'ugen.*\.\([0-9][0-9]*\)'`
-	if [ -z "${unit}" ]; then
-		echo $i - Invalid unit number
-	fi
-	if [ -z "${endpoint}" ]; then
-		minor=`expr $unit \* 16`
-		mknod ugen$unit c 114 $minor
-	else
-		minor=`expr $unit \* 16 + $endpoint`
-		mknod ugen$unit.$endpoint c 114 $minor
-	fi
-	;;
-
-lpt*)
-	unit=`expr $i : 'lpt\(.*\)'`
-	mknod lpt$unit c 16 $unit
-	mknod lpctl$unit c 16 `expr $unit + 128`
-	;;
-
-tw*)
-	unit=`expr $i : 'tw\(.*\)'`
-	mknod tw$unit c 19 $unit
-	chgrp operator tw$unit
-	;;
-
-# Use this to create virtual consoles for syscons, pcvt or codrv
-# ttyv0-b
-# use as MAKEDEV vtyNN to create NN entries
-vty*)
-	chr=12
-	units=`expr $i : 'vty\(.*\)'`
-	eval `echo ${chr} ${units} | awk ' { c=0+$1; n=0+$2 } END {
-		for (i = 0; i < n; i++)
-			printf("mknod ttyv%01x c %d %d;", i, c, i); }'`
-	ln -fs ttyv0 vga	# XXX X still needs this pccons relic
-	;;
-
-bpf*)
-	nbpf=`expr $i : 'bpf\(.*\)$'`
-	unit=0
-	while [ $unit -le $nbpf ]; do
-		mknod bpf$unit c 23 $unit
-		unit=`expr $unit + 1`
-	done
-	;;
-
-speaker)
-	mknod speaker c 26 0
-	;;
-
-cuaa?|cua?)
-	umask 7
-	unit=`expr $i : 'cua.*\(.\)$'`
-	m=`ttyminor $unit`
-	mknod cuaa$unit c 28 `expr $m + 128`
-	mknod cuaia$unit c 28 `expr $m + 32 + 128`
-	mknod cuala$unit c 28 `expr $m + 64 + 128`
-	chown uucp:dialer cua*a$unit
-	umask 77
-	;;
-
-tty0?|ttyd?|tty?)
-	unit=`expr $i : 'tty.*\(.\)$'`
-	m=`ttyminor $unit`
-	mknod ttyd$unit c 28 $m
-	mknod ttyid$unit c 28 `expr $m + 32`
-	mknod ttyld$unit c 28 `expr $m + 64`
-	;;
-
-cuac?)
-	umask 7
-	portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
-		  g h i j k l m n o p q r s t u v"
-	major=48
-	card=`expr $i : 'cua.*\(.\)$'`
-	for unit in $portlist
-	do
-		minor=`ttyminor $unit`
-		minor=`expr $card \* 65536 + $minor`
-		name=$card$unit
-		mknod cuac$name c $major `expr $minor + 128`
-		mknod cuaic$name c $major `expr $minor + 32 + 128`
-		mknod cualc$name c $major `expr $minor + 64 + 128`
-		chown uucp:dialer cuac$name cuaic$name cualc$name
-	done
-	umask 77
-	;;
-
-ttyc?)
-	portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
-		  g h i j k l m n o p q r s t u v"
-	major=48
-	card=`expr $i : 'tty.*\(.\)$'`
-	for unit in $portlist
-	do
-		minor=`ttyminor $unit`
-		minor=`expr $card \* 65536 + $minor`
-		name=$card$unit
-		mknod ttyc$name c $major $minor
-		mknod ttyic$name c $major `expr $minor + 32`
-		mknod ttylc$name c $major `expr $minor + 64`
-	done
-	;;
-
-# RISCom8 'rc' driver entries
-
-cuam?)
-	umask 7
-	unit=`expr $i : 'cua.*\(.\)$'`
-	m=`ttyminor $unit`
-	mknod cuam$unit c 63 `expr $m + 128`
-	chown uucp:dialer cuam$unit
-	umask 77
-	;;
-
-ttym?)
-	unit=`expr $i : 'tty.*\(.\)$'`
-	m=`ttyminor $unit`
-	mknod ttym$unit c 63 $m
-	;;
-
-# Specialix SI/XIO.
-# Note: these are 'base 1' to match the numbers on the panels, and to match
-#       the manual that comes with the system.
-ttyA*)
-	major=68
-	nports=`expr $i : 'ttyA\(.*\)$'`
-	port=1
-	while [ $port -le $nports ]; do
-		minor=`expr $port - 1`
-		name=`expr $port + 1000 | cut -c 3-4`
-		mknod ttyA$name c $major $minor
-		mknod ttyiA$name c $major `expr $minor + 65536`
-		mknod ttylA$name c $major `expr $minor + 131072`
-		port=`expr $port + 1`
-	done
-	# For the user-mode control program, 'sicontrol'
-	mknod si_control c 68 262144
-	;;
-
-cuaA*)
-	umask 7
-	major=68
-	nports=`expr $i : 'cuaA\(.*\)$'`
-	port=1
-	while [ $port -le $nports ]; do
-		minor=`expr $port - 1`
-		name=`expr $port + 1000 | cut -c 3-4`
-		mknod cuaA$name c $major `expr $minor + 128`
-		mknod cuaiA$name c $major `expr $minor + 128 + 65536`
-		mknod cualA$name c $major `expr $minor + 128 + 131072`
-		chown uucp:dialer cuaA$name cuaiA$name cualA$name
-		port=`expr $port + 1`
-	done
-	umask 77
-	;;
-
-# Digiboard PC/?? 16 port card.
-# The current scheme of minor numbering is:
-#
-#       unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5}
-#
-#   CARD bitfield in future versions may be extended to 3 bits.
-#
-# See dgb(4)
-#
-ttyD?)
-	portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
-	major=58
-	card=`expr $i : 'tty.*\(.\)$'`
-	for unit in $portlist
-	do
-		minor=`ttyminor $unit`
-		minor=`expr $card \* 65536 + $minor`
-		name=$card$unit
-		mknod ttyD$name c $major $minor
-		mknod ttyiD$name c $major `expr $minor + 32`
-		mknod ttylD$name c $major `expr $minor + 64`
-	done
-	;;
-
-cuaD?)
-	umask 7
-	portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
-	major=58
-	card=`expr $i : 'cua.*\(.\)$'`
-	for unit in $portlist
-	do
-		minor=`ttyminor $unit`
-		minor=`expr $card \* 65536 + $minor`
-		name=$card$unit
-		mknod cuaD$name c $major `expr $minor + 128`
-		mknod cuaiD$name c $major `expr $minor + 32 + 128`
-		mknod cualD$name c $major `expr $minor + 64 + 128`
-		chown uucp:dialer cua*D$name
-	done
-	umask 77
-	;;
-
-ttyM*)
-	portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
-	modulelist="a b c d"
-	major=101
-	card=`expr $i : 'tty.*\(.\)$'`
-	for unit in $modulelist
-	do
-		moduleminor=`ttyminor $unit`
-		moduleminor=`expr $moduleminor % 10 \* 16`
-		modulename=$unit
-
-		for unit in $portlist
-		do
-			minor=`ttyminor $unit`
-			minor=`expr $card \* 65536 + $minor + $moduleminor`
-			name=$card$modulename$unit
-			rm -f tty*M$name
-			mknod ttyM$name c $major $minor
-			mknod ttyiM$name c $major `expr $minor + 64`
-			mknod ttylM$name c $major `expr $minor + 128`
-			chown root:wheel tty*M$name
-		done
-	done
-	;;
-
-cuaM?)
-	umask 7
-	portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
-	modulelist="a b c d"
-	major=101
-	card=`expr $i : 'cua.*\(.\)$'`
-	for unit in $modulelist
-	do
-		moduleminor=`ttyminor $unit`
-		moduleminor=`expr $moduleminor % 10 \* 16`
-		modulename=$unit
-
-		for unit in $portlist
-		do
-			minor=`ttyminor $unit`
-			minor=`expr $card \* 65536 + $minor + $moduleminor`
-			name=$card$modulename$unit
-			rm -f cua*M$name
-			mknod cuaM$name c $major `expr $minor + 262144`
-			mknod cuaiM$name c $major `expr $minor + 64 + 262144`
-			mknod cualM$name c $major `expr $minor + 128 + 262144`
-			chown uucp:dialer cua*M$name
-		done
-	done
-	umask 77
-	;;
-
-ttyR?)
-	major=81
-	BOARD=1; MINOR=65536; Rnum=0
-	MINOR=`expr $BOARD \* 65536`
-	dmesg | grep ^RocketPort[0-4] > /tmp/rp_list
-	controllers=`awk '{print $1}' < /tmp/rp_list`
-	rm -f /dev/ttyR*; rm -f /dev/ttyiR*; rm -f /dev/ttylR*
-	for i in $controllers;do
- 	   ndevices=`grep ^$i /tmp/rp_list | sed -e 's/.* \([0-9]*\) ports/\1/'`
-	   echo -n "Creating $ndevices devices for $i: "
-	   for dev in `jot $ndevices 0`;do
-		   mknod /dev/ttyR$Rnum c $major $MINOR
-		   mknod /dev/ttylR$Rnum c $major `expr $MINOR + 32`
-		   mknod /dev/ttyiR$Rnum c $major `expr $MINOR + 64`
-		   Rnum=`expr $Rnum + 1`
-		   MINOR=`expr $MINOR + 1`
-	   done
-		BOARD=`expr $BOARD + 1`
-		MINOR=`expr $BOARD \* 65536`
-	   echo " "
-	done
-	;;
-
-cuaR?)
-	major=81
-	BOARD=1; MINOR=65536; Rnum=0
-	MINOR=`expr $BOARD \* 65536`
-	dmesg | grep ^RocketPort[0-4] > /tmp/rp_list
-	controllers=`awk '{print $1}' < /tmp/rp_list`
-	rm -f /dev/cuaR*; rm -f /dev/cuaiR*; rm -f /dev/cualR*
-	for i in $controllers;do
- 	   ndevices=`grep ^$i /tmp/rp_list | sed -e 's/.* \([0-9]*\) ports/\1/'`
-	   echo -n "Creating $ndevices devices for $i: "
-	   for dev in `jot $ndevices 0`;do
-		   mknod /dev/cuaR$Rnum c  $major `expr $MINOR + 128`
-		   mknod /dev/cualR$Rnum c $major `expr $MINOR + 128 + 32`
-		   mknod /dev/cuaiR$Rnum c $major `expr $MINOR + 128 + 64`
-		   Rnum=`expr $Rnum + 1`
-		   MINOR=`expr $MINOR + 1`
-	   done
-		BOARD=`expr $BOARD + 1`
-		MINOR=`expr $BOARD \* 65536`
-	   echo " "
-	done
-	chown uucp:dialer /dev/cuaR*
-	;;
-
-mse*)
-	unit=`expr $i : 'mse\(.*\)'`
-	chr=27
-	mknod mse$unit c $chr `expr $unit '*' 2 + 1`	# non-blocking for X11
-	;;
-
-psm*)
-	unit=`expr $i : 'psm\(.*\)'`
-	chr=21
-	mknod psm$unit c $chr `expr $unit '*' 2 + 1`	# non-blocking for X11
-	;;
-
-mouse*)
-	name=`expr $i : 'mouse\(.*\)'`
-	if [ ! -c $name ]; then
-		$0 $name			# make the appropriate device
-	fi
-	ln -fs $name mouse
-	;;
-
-pcaudio)
-	mknod pcaudio c 24 0
-	mknod pcaudioctl c 24 128
-	;;
-
-socksys)
-	mknod socksys c 41 0
-	mknod spx c 41 1
-	ln -fs socksys nfsd
-	chmod 666 socksys nfsd spx
-	;;
-
-snd*)
-#
-# changes from Linux voxware
-# minor		Linux			FreeBSD
-# 8		sequencer2 (aka music0)	music0
-# 17		patmgr0			sequencer1
-# 33		patmgr1			sequencer2
-#
-
-	unit=`expr $i : 'snd\(.*\)'`
-	chr=30
-
-	# XXX write this less verbosely, like std
-	snd_security_hole=0	# XXX
-	umask $snd_security_hole
-
-	ln -fs mixer$unit mixer
-	ln -fs sequencer$unit sequencer
-	ln -fs dsp$unit dsp
-	ln -fs audio$unit audio
-	ln -fs dspW$unit dspW
-	ln -fs music$unit music
-	ln -fs pss$unit pss
-
-	mknod mixer$unit	c $chr `expr $unit '*' 16 + 0`
-	mknod sequencer$unit	c $chr `expr $unit '*' 16 + 1`
-	mknod midi$unit		c $chr `expr $unit '*' 16 + 2`
-	mknod dsp$unit		c $chr `expr $unit '*' 16 + 3`
-	mknod audio$unit	c $chr `expr $unit '*' 16 + 4`
-	mknod dspW$unit		c $chr `expr $unit '*' 16 + 5`
-	mknod sndstat		c $chr 6
-				# minor number 7 is unused
-	mknod music$unit	c $chr `expr $unit '*' 16 + 8`
-	mknod pss$unit		c $chr `expr $unit '*' 16 + 9`
-				# minor numbers 10-15 are unused
-	umask 77
-	;;
-
-vat)
-	mknod vatio c 25 128
-	chmod 660 vatio
-	;;
-
-gsc*)
-	unit=`expr $i : 'gsc\(.*\)'`
-	mknod gsc${unit} c 47 $unit
-	mknod gsc${unit}p c 47 $(($unit + 8))
-	mknod gsc${unit}d c 47 $(($unit + 32))
-	mknod gsc${unit}pd c 47 $(($unit + 40))
-	chmod 666 gsc${unit}*
-	;;
-
-apm*)
-	chr=39
-	mknod apm c $chr 0
-	mknod apmctl c $chr 8
-	chgrp operator apm
-	chgrp operator apmctl
-	chmod 660 apm
-	chmod 660 apmctl
-	;;
-
-card*)
-	unit=`expr $i : 'card\(.*\)'`
-	chr=50
-	mknod card$unit c $chr $unit
-	chmod 644 card$unit
-	;;
-
-ttyx?|ttyy?|ttyz?)
-	case $i in
-	*0) unit=0;;	*1) unit=1;;	*2) unit=2;;	*3) unit=3;;
-	*4) unit=4;;	*5) unit=5;;	*6) unit=6;;	*7) unit=7;;
-	*8) unit=8;;	*9) unit=9;;	*a) unit=10;;	*b) unit=11;;
-	*c) unit=12;;	*d) unit=13;;	*e) unit=14;;	*f) unit=15;;
-	esac
-	case $i in
-	ttyy?)  unit=`expr $unit \+ 16`;;
-	ttyz?)  unit=`expr $unit \+ 32`;;
-	esac
-	mknod $i c 42 $unit
-	chown uucp:wheel $i
-	;;
-
-cronyx)
-	mknod cronyx c 42 63
-	;;
-
-joy)
-	mknod joy0 c 51 0
-	mknod joy1 c 51 1
-	chgrp operator joy0 joy1
-	chmod 640  joy0 joy1
-	;;
-
-spigot)
-	mknod spigot c 11 0
-	chmod 444 spigot
-	;;
-
-ctx?)
-	unit=`expr $i : 'ctx\(.*\)'`
-	mknod ctx$unit c 40 $unit
-	chmod 444 ctx$unit
-	;;
-
-meteor?)
-	unit=`expr $i : 'meteor\(.*\)'`
-	mknod meteor$unit c 67 $unit
-	chmod 444 meteor$unit
-	;;
-
-bktr?)
-	unit=`expr $i : 'bktr\(.*\)'`
-	mknod bktr$unit c 92 $unit
-	mknod tuner$unit c 92 $((16 + $unit ))
-	mknod vbi$unit c 92 $((32 + $unit ))
-	chmod 444 bktr$unit tuner$unit vbi$unit
-	;;
-
-tun*)
-	ntun=`expr $i : 'tun\(.*\)$'`
-	unit=0
-	while [ $unit -le $ntun ]; do
-		mknod tun$unit c 52 $unit
-		chown uucp:dialer tun$unit
-		unit=`expr $unit + 1`
-	done
-	;;
-
-sysmouse)
-	mknod sysmouse c 12 128
-	mknod consolectl c 12 255
-	;;
-
-snp?)
-	unit=`expr $i : 'snp\(.*\)'`
-	mknod snp$unit c 53 $unit
-	;;
-
-# dufault@hda.com: If I do much more work on other A-D boards
-# then eventually we'll have a "ad" and "dio" interface and some of these
-# "labpcaio" ones will be gone.
-# labpcaio: D-A and A-D.
-# labpcdio: Digital in and Digital out.
-#
-labpc*)
-	umask 7
-	case $i in
-	labpcaio*)
-		name=labpcaio
-		unit=`expr $i : 'labpcaio\(.*\)'`
-		all="0 1 2 3 4 5 6 7"
-		offset=0
-		;;
-	labpcdio*)
-		name=labpcdio
-		unit=`expr $i : 'labpcdio\(.*\)'`
-		all="0 1 2 3"
-		offset=8
-		;;
-	*)
-		die 3 "Don't know LabPC type $i"
-		;;
-	esac
-	if [ -z "${unit}" ]; then
-		unit=all
-	fi
-	case $unit in
-		0|1|2|3|4|5|6|7)
-				mknod $name$unit c 66 `expr $offset + $unit `
-		;;
-		all)
-			for i in $all
-			do
-				mknod $name$i c 66 `expr $offset + $i `
-			done
-			;;
-		*)
-			echo "No such LabPC unit: $unit"
-			;;
-	esac
-	umask 77
-	;;
-
-perfmon)
-	mknod perfmon c 2 32
-	chgrp kmem perfmon
-	chmod 640 perfmon
-	;;
-
-kbd*)
-	unit=`expr $i : 'kbd\(.*\)'`
-	chr=112
-	mknod kbd$unit c $chr $unit
-	;;
-
-i4b)
-	mknod i4b c 60 0
-	chown root:wheel i4b
-	chmod 600 i4b
-	;;
-
-i4bctl)
-	mknod i4bctl c 55 0
-	chown root:wheel i4bctl
-	chmod 600 i4bctl
-	;;
-
-i4brbch*)
-	unit=`expr $i : 'i4brbch\(.*\)'`
-	mknod i4brbch$unit c 57 $unit
-	chown root:wheel i4brbch$unit
-	chmod 600 i4brbch$unit
-	;;
-
-i4bteld*)
-	offset=64
-	unit=`expr $i : 'i4bteld\(.*\)'`
-	mknod i4bteld$unit c 56 `expr $offset + $unit `
-	chown root:wheel i4bteld$unit
-	chmod 600 i4bteld$unit
-	;;
-
-i4btel*)
-	unit=`expr $i : 'i4btel\(.*\)'`
-	mknod i4btel$unit c 56 $unit
-	chown root:wheel i4btel$unit
-	chmod 600 i4btel$unit
-	;;
-
-i4btrc*)
-	unit=`expr $i : 'i4btrc\(.*\)'`
-	mknod i4btrc$unit c 59 $unit
-	chown root:wheel i4btrc$unit
-	chmod 600 i4btrc$unit
-	;;
-
-local)
-	umask 0			# XXX should be elsewhere
-	sh MAKEDEV.local
-	umask 77
-	;;
-
-*)
-	echo $i - no such device name
-	;;
-
-esac
-done