diff options
| author | hrs <hrs@FreeBSD.org> | 2011-09-13 00:06:11 +0000 |
|---|---|---|
| committer | hrs <hrs@FreeBSD.org> | 2011-09-13 00:06:11 +0000 |
| commit | 08320280c671000afa24235eaab7869ae2dbd736 (patch) | |
| tree | 65838798bfafaaad2f247158cfaf03eb7eb3814f /etc/defaults/rc.conf | |
| parent | 06dd2030acf84db5a0d9e068e527ed1d2545df04 (diff) | |
| download | FreeBSD-src-08320280c671000afa24235eaab7869ae2dbd736.zip FreeBSD-src-08320280c671000afa24235eaab7869ae2dbd736.tar.gz | |
Add $ipv6_cpe_wanif to enable functionality required for IPv6 CPE
(r225485). When setting an interface name to it, the following
configurations will be enabled:
1. "no_radr" is set to all IPv6 interfaces automatically.
2. "-no_radr accept_rtadv" will be set only for $ipv6_cpe_wanif. This is
done just before evaluating $ifconfig_IF_ipv6 in the rc.d scripts (this
means you can manually supersede this configuration if necessary).
3. The node will add RA-sending routers to the default router list
even if net.inet6.ip6.forwarding=1.
This mode is added to conform to RFC 6204 (a router which connects
the end-user network to a service provider network). To enable
packet forwarding, you still need to set ipv6_gateway_enable=YES.
Note that accepting router entries into the default router list when
packet forwarding capability and a routing daemon are enabled can
result in messing up the routing table. To minimize such unexpected
behaviors, "no_radr" is set on all interfaces but $ipv6_cpe_wanif.
Approved by: re (bz)
Diffstat (limited to 'etc/defaults/rc.conf')
| -rw-r--r-- | etc/defaults/rc.conf | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/etc/defaults/rc.conf b/etc/defaults/rc.conf index d467eaa..d959f20 100644 --- a/etc/defaults/rc.conf +++ b/etc/defaults/rc.conf @@ -468,6 +468,9 @@ ipv6_static_routes="" # Set to static route list (or leave empty). # route toward loopback interface. #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. +ipv6_cpe_wanif="NO" # Set to the upstram interface name if this + # node will work as a router to forward IPv6 + # packets not explicitly addressed to itself. ipv6_privacy="NO" # Use privacy address on RA-receiving IFs # (RFC 4193) |
