This commit was generated by cvs2svn to compensate for changes in r75107,

which included commits to RCS files with non-trunk default branches.

39 files changed, 5096 insertions, 1046 deletions

diff --git a/contrib/libpcap/.cvsignore b/contrib/libpcap/.cvsignore
new file mode 100644
index 0000000..12a60dd
--- /dev/null
+++ b/contrib/libpcap/.cvsignore
@@ -0,0 +1,10 @@
+config.log
+config.cache
+config.status
+config.h
+.devel
+Makefile
+scanner.c
+grammar.c
+tokdefs.h
+version.c
diff --git a/contrib/libpcap/CHANGES b/contrib/libpcap/CHANGES
index 4d739c5..5793de0 100644
--- a/contrib/libpcap/CHANGES
+++ b/contrib/libpcap/CHANGES
@@ -1,11 +1,76 @@
-@(#) $Header: /tcpdump/master/libpcap/CHANGES,v 1.48 1999/10/30 23:50:43 itojun Exp $ (LBL)
+@(#) $Header: /tcpdump/master/libpcap/CHANGES,v 1.55 2001/01/10 04:10:33 guy Exp $ (LBL)
 
-Sun Oct 19 JST 1999  itojun@iijlab.net
-	* bring in KAME IPv6/IPsec bpf compiler.
+Tuesday January 9, 2001. guy@alum.mit.edu. Summary for 0.6 release
 
-Sometime in 1999
-	* tcpdump.org imported LBL 0.4
+	New Linux libpcap implementation, which, in 2.2 and later
+	kernels, uses PF_PACKET sockets and supports kernel packet
+	filtering (if compiled into the kernel), and supports the "any"
+	device for capturing on all interfaces.  Cleans up promiscuous
+	mode better on pre-2.2 kernels, and has various other fixes
+	(handles 2.4 ARPHRD_IEEE802_TR, handles ISDN devices better,
+	doesn't show duplicate packets on loopback interface, etc.).
 
+	Fixed HP-UX libpcap implementation to correctly get the PPA for
+	an interface, to allow interfaces to be opened by interface name.
+
+	libpcap savefiles have system-independent link-layer type values
+	in the header, rather than sometimes platform-dependent DLT_
+	values, to make it easier to exchange capture files between
+	different OSes.
+
+	Non-standard capture files produced by some Linux tcpdumps, e.g.
+	the one from Red Hat Linux 6.2 and later, can now be read.
+
+	Updated autoconf stock files.
+
+	Filter expressions can filter on VLAN IDs and various OSI
+	protocols, and work on Token Ring (with non-source-routed
+	packets).
+
+	"pcap_open_dead()" added to allow compiling filter expressions
+	to pcap code without opening a capture device or capture file.
+
+	Header files fixed to allow use in C++ programs.
+
+	Removed dependancy on native headers for packet layout.
+	Removed Linux specific headers that were shipped.
+
+	Security fixes: Strcpy replaced with strlcpy, sprintf replaced
+	with snprintf.
+
+	Fixed bug that could cause subsequent "pcap_compile()"s to fail
+	erroneously after one compile failed.
+
+	Assorted other bug fixes.
+
+	README.aix and README.linux files added to describe
+	platform-specific issues.
+
+	"getifaddrs()" rather than SIOCGIFCONF used, if available.
+
+v0.5 Sat Jun 10 11:09:15 PDT 2000
+
+itojun@iijlab.net
+- Brought in KAME IPv6/IPsec bpf compiler.
+- Fixes for NetBSD.
+- Support added for OpenBSD DLT_LOOP and BSD/OS DLT_C_HDLC (Cisco HDLC),
+  and changes to work around different BSDs having different DLT_ types
+  with the same numeric value.
+
+Assar Westerlund  <assar@sics.se>
+- Building outside the source code tree fixed.
+- Changed to write out time stamps with 32-bit seconds and microseconds
+  fields, regardless of whether those fields are 32 bits or 64 bits in
+  the OS's native "struct timeval".
+- Changed "pcap_lookupdev()" to dynamically grow the buffer into which
+  the list of interfaces is read as necessary in order to hold the
+  entire list.
+
+Greg Troxel <gdt@ir.bbn.com>
+- Added a new "pcap_compile_nopcap()", which lets you compile a filter
+  expression into a BPF program without having an open live capture or
+  capture file.
+  
 v0.4 Sat Jul 25 12:40:09 PDT 1998
 
 - Fix endian problem with DLT_NULL devices. From FreeBSD via Bill
diff --git a/contrib/libpcap/CREDITS b/contrib/libpcap/CREDITS
index a518ff5..5797237 100644
--- a/contrib/libpcap/CREDITS
+++ b/contrib/libpcap/CREDITS
@@ -1,15 +1,36 @@
-This file lists people who contributed to libpcap or tcpdump:
-	Bill Fenner		<fenner@research.att.com>
-	Assar Westerlund 	<assar@sics.se>
-	Alexei			<kuznet@ms2.inr.ac.ru>
-	Jun-ichiro itojun Hagino <itojun@iijlab.net>
-	Guy Harris 		<gharris@flashcom.net>
-	Torsten Landschoff 	<t.landschoff@gmx.net>
-	Michael Richardson 	<mcr@sandelman.ottawa.on.ca>
+This file lists people who have contributed to libpcap:
+
+The current maintainers:
+	Bill Fenner			<fenner@research.att.com>
+	Assar Westerlund	 	<assar@sics.se>
+	Alexey Kuznetsov		<kuznet@ms2.inr.ac.ru>
+	Jun-ichiro itojun Hagino	<itojun@iijlab.net>
+	Guy Harris	 		<guy@alum.mit.edu>
+	Torsten Landschoff	 	<torsten@debian.org>
+	Michael Richardson	 	<mcr@sandelman.ottawa.on.ca>
+	Sebastian Krahmer		<krahmer@cs.uni-potsdam.de>
+
+Additional people who have contributed patches:
+
+	Arkadiusz Miskiewicz		<misiek@pld.org.pl>
+	Fulvio Risso			<risso@polito.it>
+	Charles M. Hannum		<mycroft@netbsd.org>
+	Chris G. Demetriou		<cgd@netbsd.org>
+	Darren Reed			<darrenr@reed.wattle.id.au>
+	Greg Troxel			<gdt@ir.bbn.com>
+	Jefferson Ogata			<jogata@nodc.noaa.gov>
+	Juergen Schoenwaelder		<schoenw@ibr.cs.tu-bs.de>
+	Lorenzo Cavallaro		<sullivan@sikurezza.org>
+	Love Hörnquist-Åstrand		<lha@stacken.kth.se>
+	Monroe Williams			<monroe@pobox.com>
+	Olaf Kirch			<okir@caldera.de>
+	Peter Jeremy			<peter.jeremy@alcatel.com.au>
+	Rafal Maszkowski		<rzm@icm.edu.pl>
+	Rick Jones			<raj@cup.hp.com>
+	Tony Li				<tli@jnx.com>
+	Uwe Girlich			<Uwe.Girlich@philosys.de>
 
 The original LBL crew:
 	Steve McCanne
 	Craig Leres
 	Van Jacobson
-
-
diff --git a/contrib/libpcap/FILES b/contrib/libpcap/FILES
index daad279..36141ca 100644
--- a/contrib/libpcap/FILES
+++ b/contrib/libpcap/FILES
@@ -1,15 +1,23 @@
 CHANGES
+CREDITS
 FILES
 INSTALL
+LICENSE
 Makefile.in
 README
-SUNOS4
+README.aix
+README.linux
+SUNOS4/nit_if.o.sparc
+SUNOS4/nit_if.o.sun3
+SUNOS4/nit_if.o.sun4c.4.0.3c
 VERSION
 aclocal.m4
 bpf/net/bpf.h
 bpf/net/bpf_filter.c
+bpf_dump.c
 bpf_image.c
 config.guess
+config.h.in
 config.sub
 configure
 configure.in
@@ -20,14 +28,13 @@ gencode.h
 grammar.y
 inet.c
 install-sh
-lbl/gnuc.h
+lbl/os-osf4.h
 lbl/os-solaris2.h
 lbl/os-sunos4.h
 lbl/os-ultrix4.h
-linux-include/netinet/if_ether.h
-linux-include/netinet/ip_var.h
 mkdep
 nametoaddr.c
+nlpid.h
 optimize.c
 pcap-bpf.c
 pcap-dlpi.c
@@ -48,3 +55,4 @@ pcap.h
 ppp.h
 savefile.c
 scanner.l
+sll.h
diff --git a/contrib/libpcap/INSTALL b/contrib/libpcap/INSTALL
index ee797f2..e8d8d96 100644
--- a/contrib/libpcap/INSTALL
+++ b/contrib/libpcap/INSTALL
@@ -1,13 +1,12 @@
-@(#) $Header: /tcpdump/master/libpcap/INSTALL,v 1.42.1.1 1999/10/07 23:46:40 mcr Exp $ (LBL)
+@(#) $Header: /tcpdump/master/libpcap/INSTALL,v 1.46 2000/12/16 09:05:11 guy Exp $ (LBL)
 
-To build libpcap, first customize any paths in Makefile.in, then run
-"./configure" (a shell script). The configure script will determine
-your system attributes and generate an appropriate Makefile from
-Makefile.in. Next run "make". If everything goes well you can su to
-root and run "make install", "make install-incl" and "make
-install-man". However, you need not install libpcap if you just want to
-build tcpdump; just make sure the tcpdump and libpcap directory trees
-have the same parent directory.
+To build libpcap, run "./configure" (a shell script). The configure
+script will determine your system attributes and generate an
+appropriate Makefile from Makefile.in. Next run "make". If everything
+goes well you can su to root and run "make install". However, you need
+not install libpcap if you just want to build tcpdump; just make sure
+the tcpdump and libpcap directory trees have the same parent
+directory.
 
 If configure says:
 
@@ -34,18 +33,7 @@ You will need an ANSI C compiler to build libpcap. The configure script
 will abort if your compiler is not ANSI compliant. If this happens, use
 the GNU C compiler, available via anonymous ftp:
 
-	ftp://prep.ai.mit.edu/pub/gnu/gcc-*.tar.gz
-
-Note well: If you use gcc, you may need to run its "fixincludes"
-script. Running fixincludes is not required with later versions of gcc
-and in some cases (e.g. Solaris 2.5) causes problems when run. The
-configure script will abort with:
-
-    checking for ANSI ioctl definitions... yes
-    configure: error: see the INSTALL for more info
-
-if it detects if the fixincludes needs to be run. If the fixincludes
-test in configure passes, you're probably ok.
+	ftp://ftp.gnu.org/pub/gnu/gcc/
 
 If you use flex, you must use version 2.4.6 or higher. The configure
 script automatically detects the version of flex and will not use it
@@ -122,11 +110,15 @@ If you get an error like:
 when using DLPI, look for the DL_ERROR_ACK error return values, usually
 in /usr/include/sys/dlpi.h, and find the corresponding value.
 
-Under OSF, packet capture must be enabled before it can be used. For
-instructions on how to enable packet filter support, see:
+Under {DEC OSF/1, Digital UNIX, Tru64 UNIX}, packet capture must be
+enabled before it can be used.  For instructions on how to enable packet
+filter support, see:
 
 	ftp://ftp.digital.com/pub/Digital/dec-faq/Digital-UNIX
 
+Look for the "How do I configure the Berkeley Packet Filter and capture
+tcpdump traces?" item.
+
 Once you enable packet filter support, your OSF system will support bpf
 natively.
 
@@ -147,53 +139,76 @@ then you don't have the streams package. In addition, we believe you
 need to install the "9.X LAN and DLPI drivers cumulative" patch
 (PHNE_6855) to make the version 9 DLPI work with libpcap.
 
-It's been reported that the DLPI streams package is standard starting
-with HP-UX 10.
+The DLPI streams package is standard starting with HP-UX 10.
 
 The HP implementation of DLPI is a little bit eccentric. Unlike
 Solaris, you must attach /dev/dlpi instead of the specific /dev/*
-network pseudo device entry in order to capture packets. The ppa is
+network pseudo device entry in order to capture packets. The PPA is
 based on the ifnet "index" number. Under HP-UX 9, it is necessary to
 read /dev/kmem and the kernel symbol file (/hp-ux). Under HP-UX 10,
-dlpi can provide information for determining the ppa. It does not seem
+DLPI can provide information for determining the PPA. It does not seem
 to be possible to trace the loopback interface. Unlike other DLPI
 implementations, PHYS implies MULTI and SAP and you get an error if you
-try to enable more than one promiscous more than one promiscuous mode
-at a time. Finally, testing shows that there can't be more than one
-simultaneous dlpi user per network interface and you cannot capture
-outbound packets.
+try to enable more than one promiscuous mode at a time.
+
+It is impossible to capture outbound packets on HP-UX 9.  To do so on
+HP-UX 10, you will, apparently, need a late "LAN products cumulative
+patch" (at one point, it was claimed that this would be PHNE_18173 for
+s700/10.20; at another point, it was claimed that the required patches
+were PHNE_20892, PHNE_20725 and PHCO_10947, or newer patches), and to do
+so on HP-UX 11 you will, apparently, need the latest lancommon/DLPI
+patches and the latest driver patch for the interface(s) in use on HP-UX
+11 (at one point, it was claimed that patches PHNE_19766, PHNE_19826,
+PHNE_20008, and PHNE_20735 did the trick).
+
+Furthermore, on HP-UX 10, you will need to turn on a kernel switch by
+doing
+
+	echo 'lanc_outbound_promisc_flag/W 1' | adb -w /stand/vmunix /dev/mem
+
+You would have to arrange that this happen on reboots; the right way to
+do that would probably be to put it into an executable script file
+"/sbin/init.d/outbound_promisc" and making
+"/sbin/rc2.d/S350outbound_promisc" a symbolic link to that script.
+
+Finally, testing shows that there can't be more than one simultaneous
+DLPI user per network interface.
 
 If you use Linux, this version of libpcap is known to compile and run
-under Red Hat 4.0 with the 2.0.25 kernel. It may work with earlier 2.X
-versions but is guaranteed not to work with 1.X kernels. Running more
-than one libpcap program at a time can cause problems since promiscuous
-mode is implemented by twiddlin the interface flags from the libpcap
-application. Also, packet timestamps aren't very good. This appears to
-be due to haphazard handling of the timestamp in the kernel.
+under Red Hat 4.0 with the 2.0.25 kernel.  It may work with earlier 2.X
+versions but is guaranteed not to work with 1.X kernels.  Running more
+than one libpcap program at a time, on a system with a 2.0.X kernel, can
+cause problems since promiscuous mode is implemented by twiddling the
+interface flags from the libpcap application; the packet capture
+mechanism in the 2.2 and later kernels doesn't have this problem.  Also,
+packet timestamps aren't very good.  This appears to be due to haphazard
+handling of the timestamp in the kernel.
 
 Note well: there is rumoured to be a version of tcpdump floating around
-called 3.0.3 that includes libpcap and is supposed to support Linux.
-You should be advised that the Network Research Group at LBNL never
-generated a release with this version number. We note with interest
-that a standard cracker trick to get people to install trojans is to
-distribute bogus packages that have a version number higher than the
-current release. We also note with annoyance that 90% of the Linux
-related bug reports we get are due to changes made to unofficial
-versions of our page. If you are having trouble but aren't using a
-version that came from ftp.ee.lbl.gov, please try that before
-submitting a bug report!
+called 3.0.3 that includes libpcap and is supposed to support Linux. 
+You should be advised that neither the Network Research Group at LBNL
+nor the Tcpdump Group ever generated a release with this version number. 
+The LBNL Network Research Group notes with interest that a standard
+cracker trick to get people to install trojans is to distribute bogus
+packages that have a version number higher than the current release. 
+They also noted with annoyance that 90% of the Linux related bug reports
+they got are due to changes made to unofficial versions of their page. 
+If you are having trouble but aren't using a version that came from
+tcpdump.org, please try that before submitting a bug report!
+
+On Linux, libpcap will not work if the kernel does not have the packet
+socket option enabled; see the README.linux file for information about
+this.
 
 If you use AIX, you may not be able to build libpcap from this release.
-Although AIX 4 ships with tcpdump, it is an old version that predates
 libpcap. We do not have an AIX system in house so it's impossible for
 us to test AIX patches submitted to us. We are told that you must link
 against /lib/pse.exp, that you must use AIX cc or a GNU C compiler
 newer than 2.7.2 and that you may need to run strload before running a
-libpcap application. Also, it may be necessary to run the configure
-script as root in order for it to detect that bpf is available. Another
-workaround is to use:
+libpcap application.
 
-    ./configure --with-pcap=bpf
+Read the README.aix file for information on installing libpcap and
+configuring your system to be able to support libpcap.
 
 If you use NeXTSTEP, you will not be able to build libpcap from this
 release. We hope to support this operating system in some future
@@ -215,7 +230,7 @@ Another workaround is to use flex and bison.
 If you use SCO, you might have trouble building libpcap from this
 release. We do not have a machine running SCO and have not had reports
 of anyone successfully building on it. Since SCO apparently supports
-dlpi, it's possible the current version works. Meanwhile, sco provides
+DLPI, it's possible the current version works. Meanwhile, SCO provides
 a tcpdump binary as part of their "Network/Security Tools" package:
 
     http://www.sco.com/technology/internet/goodies/#SECURITY
@@ -236,7 +251,7 @@ a Sun4, your version of bison is broken. In any case version 1.16 or
 higher is recommended (1.14 is known to cause problems 1.16 is known to
 work). Either pick up a current version from:
 
-	ftp://prep.ai.mit.edu/pub/gnu/bison.tar.gz
+	ftp://ftp.gnu.org/pub/gnu/bison
 
 or hack around it by inserting the lines:
 
@@ -303,7 +318,6 @@ inet.c		- network routines
 install-sh	- BSD style install script
 lbl/gnuc.h	- gcc macros and defines
 lbl/os-*.h	- os dependent defines and prototypes
-linux-include/*	- network include files missing on Linux
 mkdep		- construct Makefile dependency list
 nametoaddr.c	- hostname to address routines
 net		- symlink to bpf/net
diff --git a/contrib/libpcap/LICENSE b/contrib/libpcap/LICENSE
new file mode 100644
index 0000000..dea5f7d
--- /dev/null
+++ b/contrib/libpcap/LICENSE
@@ -0,0 +1,19 @@
+License: BSD
+ 
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+  
+  1. Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+  2. Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+  3. The names of the authors may not be used to endorse or promote
+     products derived from this software without specific prior
+     written permission.
+  
+THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
diff --git a/contrib/libpcap/Makefile.in b/contrib/libpcap/Makefile.in
index 2cb6feb..600087a 100644
--- a/contrib/libpcap/Makefile.in
+++ b/contrib/libpcap/Makefile.in
@@ -17,7 +17,7 @@
 #  WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
 #  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 #
-# @(#) $Header: /tcpdump/master/libpcap/Makefile.in,v 1.75 1999/10/30 05:33:45 itojun Exp $ (LBL)
+# @(#) $Header: /tcpdump/master/libpcap/Makefile.in,v 1.87.2.1 2001/01/18 04:06:24 guy Exp $ (LBL)
 
 #
 # Various configurable paths (remember to edit Makefile.in, not Makefile)
@@ -27,11 +27,11 @@
 prefix = @prefix@
 exec_prefix = @exec_prefix@
 # Pathname of directory to install the include files
-INCLDEST = @includedir@
+includedir = @includedir@
 # Pathname of directory to install the library
-LIBDEST =  @libdir@
+libdir =  @libdir@
 # Pathname of directory to install the man page
-MANDEST = @mandir@
+mandir = @mandir@
 
 # VPATH
 srcdir = @srcdir@
@@ -50,7 +50,9 @@ DEFS = @DEFS@
 CFLAGS = $(CCOPT) $(INCLS) $(DEFS)
 
 INSTALL = @INSTALL@
-RANLIB = @V_RANLIB@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+RANLIB = @RANLIB@
 
 #
 # Flex and bison allow you to specify the prefixes of the global symbols
@@ -69,14 +71,15 @@ YACC = @V_YACC@
 
 PSRC =	pcap-@V_PCAP@.c
 CSRC =	pcap.c inet.c gencode.c optimize.c nametoaddr.c \
-	etherent.c savefile.c bpf_filter.c bpf_image.c
+	etherent.c savefile.c bpf_filter.c bpf_image.c bpf_dump.c
 GENSRC = scanner.c grammar.c version.c
+LIBOBJS = @LIBOBJS@
 
 SRC =	$(PSRC) $(CSRC) $(GENSRC)
 
 # We would like to say "OBJ = $(SRC:.c=.o)" but Ultrix's make cannot
 # hack the extra indirection
-OBJ =	$(PSRC:.c=.o) $(CSRC:.c=.o) $(GENSRC:.c=.o)
+OBJ =	$(PSRC:.c=.o) $(CSRC:.c=.o) $(GENSRC:.c=.o) # $(LIBOBJS)
 HDR =	pcap.h pcap-int.h pcap-namedb.h pcap-nit.h pcap-pf.h \
 	ethertype.h gencode.h gnuc.h
 GENHDR = \
@@ -118,42 +121,59 @@ grammar.o: grammar.c
 version.o: version.c
 	$(CC) $(CFLAGS) -c version.c
 
+snprintf.o: $(srcdir)/../tcpdump/missing/snprintf.c
+	$(CC) $(CFLAGS) -o $@ -c $(srcdir)/../tcpdump/missing/snprintf.c
+
 version.c: $(srcdir)/VERSION
 	@rm -f $@
 	sed -e 's/.*/char pcap_version[] = "&";/' $(srcdir)/VERSION > $@
 
-bpf_filter.o: $(srcdir)/bpf/net/bpf_filter.c
-	$(CC) $(CFLAGS) -c $(srcdir)/bpf/net/bpf_filter.c -o bpf_filter.o
-
-install: force
-	$(INSTALL) -m 444 -o bin -g bin libpcap.a $(DESTDIR)$(LIBDEST)/libpcap.a
-	$(RANLIB) $(DESTDIR)$(LIBDEST)/libpcap.a
-
-install-incl: force
-	$(INSTALL) -m 444 -o bin -g bin $(srcdir)/pcap.h \
-	    $(DESTDIR)$(INCLDEST)/pcap.h
-	$(INSTALL) -m 444 -o bin -g bin $(srcdir)/pcap-namedb.h \
-	    $(DESTDIR)$(INCLDEST)/pcap-namedb.h
-	$(INSTALL) -m 444 -o bin -g bin $(srcdir)/bpf/net/bpf.h \
-	    $(DESTDIR)$(INCLDEST)/net/bpf.h
-
-install-man: force
-	$(INSTALL) -m 444 -o bin -g bin $(srcdir)/pcap.3 \
-	    $(DESTDIR)$(MANDEST)/man3/pcap.3
+bpf_filter.c: $(srcdir)/bpf/net/bpf_filter.c
+	rm -f bpf_filter.c
+	ln -s $(srcdir)/bpf/net/bpf_filter.c bpf_filter.c
+
+bpf_filter.o: bpf_filter.c
+	$(CC) $(CFLAGS) -c bpf_filter.c
+
+install:
+	[ -d $(DESTDIR)$(libdir) ] || \
+	    (mkdir -p $(DESTDIR)$(libdir); chmod 755 $(DESTDIR)$(libdir))
+	$(INSTALL_DATA) libpcap.a $(DESTDIR)$(libdir)/libpcap.a
+	$(RANLIB) $(DESTDIR)$(libdir)/libpcap.a
+	[ -d $(DESTDIR)$(includedir) ] || \
+	    (mkdir -p $(DESTDIR)$(includedir); chmod 755 $(DESTDIR)$(includedir))
+	$(INSTALL_DATA) $(srcdir)/pcap.h $(DESTDIR)$(includedir)/pcap.h
+	$(INSTALL_DATA) $(srcdir)/pcap-namedb.h \
+	    $(DESTDIR)$(includedir)/pcap-namedb.h
+	[ -d $(DESTDIR)$(includedir)/net ] || \
+	    (mkdir -p $(DESTDIR)$(includedir)/net; chmod 755 $(DESTDIR)$(includedir)/net)
+	$(INSTALL_DATA) $(srcdir)/bpf/net/bpf.h \
+	    $(DESTDIR)$(includedir)/net/bpf.h
+	[ -d $(DESTDIR)$(mandir)/man3 ] || \
+		(mkdir -p $(DESTDIR)$(mandir)/man3; chmod 755 $(DESTDIR)$(mandir)/man3)
+	$(INSTALL_DATA) $(srcdir)/pcap.3 \
+	    $(DESTDIR)$(mandir)/man3/pcap.3
+
+uninstall:
+	rm -f $(DESTDIR)$(libdir)/libpcap.a
+	rm -f $(DESTDIR)$(includedir)/pcap.h
+	rm -f $(DESTDIR)$(includedir)/pcap-namedb.h
+	rm -f $(DESTDIR)$(includedir)/net/bpf.h
+	rm -f $(DESTDIR)$(mandir)/man3/pcap.3
 
 clean:
 	rm -f $(CLEANFILES)
 
 distclean:
 	rm -f $(CLEANFILES) Makefile config.cache config.log config.status \
-	    gnuc.h os-proto.h net
+	    config.h gnuc.h os-proto.h net bpf_filter.c stamp-h stamp-h.in
 
 tags: $(TAGFILES)
 	ctags -wtd $(TAGFILES)
 
-tar:	force
+tar:
 	@cwd=`pwd` ; dir=`basename $$cwd` ; name=libpcap-`cat VERSION` ; \
-	    list="" ; tar="tar chFFf" ; \
+	    list="" ; tar="tar chf" ; \
 	    for i in `cat FILES` ; do list="$$list $$name/$$i" ; done; \
 	    echo \
 	    "rm -f ../$$name; ln -s $$dir ../$$name" ; \
@@ -165,6 +185,5 @@ tar:	force
 	    "rm -f ../$$name" ; \
 	     rm -f ../$$name
 
-force:	/tmp
-depend:	$(GENSRC) force
+depend:	$(GENSRC) bpf_filter.c
 	./mkdep -c $(CC) $(DEFS) $(INCLS) $(SRC)
diff --git a/contrib/libpcap/README b/contrib/libpcap/README
index 20be06a..c4161cd 100644
--- a/contrib/libpcap/README
+++ b/contrib/libpcap/README
@@ -1,10 +1,24 @@
-@(#) $Header: /tcpdump/master/libpcap/README,v 1.18.1.1 1999/10/07 23:46:40 mcr Exp $ (LBL)
+@(#) $Header: /tcpdump/master/libpcap/README,v 1.22 2000/07/13 06:24:14 guy Exp $ (LBL)
 
-LIBPCAP 0.4
-Lawrence Berkeley National Laboratory
-Network Research Group
-libpcap@ee.lbl.gov
-ftp://ftp.ee.lbl.gov/libpcap.tar.Z
+LIBPCAP 0.5
+Now maintained by "The Tcpdump Group"
+See 		www.tcpdump.org
+
+Please send inquiries/comments/reports to 	tcpdump-workers@tcpdump.org
+
+Anonymous CVS is available via:
+	cvs -d cvs.tcpdump.org:/tcpdump/master login
+	(password "anoncvs")
+	cvs -d cvs.tcpdump.org:/tcpdump/master checkout libpcap
+
+Version 0.5 of LIBPCAP can be retrived with the CVS tag "libpcap_0_5":
+	cvs -d cvs.tcpdump.org:/tcpdump/master checkout -r libpcap_0_5 libpcap
+
+Please send patches against the master copy to patches@tcpdump.org.
+
+formerly from 	Lawrence Berkeley National Laboratory
+		Network Research Group <libpcap@ee.lbl.gov>
+		ftp://ftp.ee.lbl.gov/libpcap.tar.Z (0.4)
 
 This directory contains source code for libpcap, a system-independent
 interface for user-level packet capture.  libpcap provides a portable
@@ -33,17 +47,19 @@ added overhead (especially, for selective filters).  Ideally, libpcap
 would translate BPF filters into a filter program that is compatible
 with the underlying kernel subsystem, but this is not yet implemented.
 
-BPF is standard in 4.4BSD, BSD/386, NetBSD, and FreeBSD.  DEC OSF/1
+BPF is standard in 4.4BSD, BSD/OS, NetBSD, FreeBSD, and OpenBSD.  DEC OSF/1
 uses the packetfilter interface but has been extended to accept BPF
 filters (which libpcap utilizes).  Also, you can add BPF filter support
 to Ultrix using the kernel source and/or object patches available in:
 
 	ftp://gatekeeper.dec.com/pub/DEC/net/bpfext42.tar.Z.
 
-Problems, bugs, questions, desirable enhancements, source code
-contributions, etc., should be sent to the email address
-"libpcap@ee.lbl.gov".
+Problems, bugs, questions, desirable enhancements, etc. 
+should be sent to the address "tcpdump-workers@tcpdump.org".
+
+Source code contributions, etc. should be sent to the email address 
+"patches@tcpdump.org".
+
+Current versions can be found at www.tcpdump.org
 
- - Steve McCanne
-   Craig Leres
-   Van Jacobson
+ - The TCPdump team
diff --git a/contrib/libpcap/README.aix b/contrib/libpcap/README.aix
new file mode 100644
index 0000000..c78a40b
--- /dev/null
+++ b/contrib/libpcap/README.aix
@@ -0,0 +1,46 @@
+(1) To configure libpcap under AIX 4.x, you should use DLPI instead
+    of BPF, since IBM's version of BPF includes some undocumented
+    and unsupported changes to the original BPF.
+
+    This can be done by specifying the flag:
+
+       --with-pcap=dlpi
+
+    to the "configure" script for libpcap.
+
+(2)  Also, it is a good idea to have the latest version of the DLPI
+     driver on your system, since certain versions may be buggy and
+     cause your AIX system to crash.  DLPI is included in the
+     fileset bos.rte.tty.  I found that the DLPI driver that came with
+     AIX 4.3.2 was buggy, and had to upgrade to bos.rte.tty 4.3.2.4:
+
+     lslpp -l bos.rte.tty
+
+     bos.rte.tty     4.3.2.4  COMMITTED  Base TTY Support and Commands
+
+     Updates for AIX filesets can be obtained from:
+     ftp://service.software.ibm.com/aix/fixes/
+
+     These updates can be installed with the smit program.
+
+(3)  After compiling libpcap, you need to make sure that the DLPI driver
+     is loaded.  Type:
+
+     strload -q -d dlpi
+
+     If the result is:
+     dlpi: yes
+
+     then the DLPI driver is loaded correctly.
+
+     If it is:
+     dlpi: no
+
+     Then you need to type:
+     strload -f /etc/dlpi.conf
+ 
+     Check again with strload -q -d dlpi that the dlpi driver is loaded.  
+
+     Alternatively, you can uncomment the lines for DLPI in
+     /etc/pse.conf and reboot the machine; this way DLPI will always
+     be loaded when you boot your system.
diff --git a/contrib/libpcap/README.linux b/contrib/libpcap/README.linux
new file mode 100644
index 0000000..ecd00e8
--- /dev/null
+++ b/contrib/libpcap/README.linux
@@ -0,0 +1,70 @@
+In order for libpcap to be able to capture packets on a Linux system,
+the "packet" protocol must be supported by your kernel.  If it is not,
+you may get error messages such as
+
+	modprobe: can't locate module net-pf-17
+
+in "/var/adm/messages", or may get messages such as
+
+	socket: Address family not supported by protocol
+
+from applications using libpcap.
+
+You must configure the kernel with the CONFIG_PACKET option for this
+protocol; the following note is from the Linux "Configure.help" file for
+the 2.0[.x] kernel:
+
+	Packet socket
+	CONFIG_PACKET
+	  The Packet protocol is used by applications which communicate
+	  directly with network devices without an intermediate network
+	  protocol implemented in the kernel, e.g. tcpdump. If you want them
+	  to work, choose Y. 
+
+	  This driver is also available as a module called af_packet.o ( =
+	  code which can be inserted in and removed from the running kernel
+	  whenever you want). If you want to compile it as a module, say M
+	  here and read Documentation/modules.txt; if you use modprobe or
+	  kmod, you may also want to add "alias net-pf-17 af_packet" to 
+	  /etc/modules.conf.
+
+and the note for the 2.2[.x] kernel says:
+
+	Packet socket
+	CONFIG_PACKET
+	  The Packet protocol is used by applications which communicate
+	  directly with network devices without an intermediate network
+	  protocol implemented in the kernel, e.g. tcpdump. If you want them
+	  to work, choose Y. This driver is also available as a module called
+	  af_packet.o ( = code which can be inserted in and removed from the
+	  running kernel whenever you want). If you want to compile it as a
+	  module, say M here and read Documentation/modules.txt.  You will
+	  need to add 'alias net-pf-17 af_packet' to your /etc/conf.modules
+	  file for the module version to function automatically.  If unsure,
+	  say Y.
+
+In addition, there is an option that, in 2.2 and later kernels, will
+allow packet capture filters specified to programs such as tcpdump to be
+executed in the kernel, so that packets that don't pass the filter won't
+be copied from the kernel to the program, rather than having all packets
+copied to the program and libpcap doing the filtering in user mode. 
+
+Copying packets from the kernel to the program consumes a significant
+amount of CPU, so filtering in the kernel can reduce the overhead of
+capturing packets if a filter has been specified that discards a
+significant number of packets.  (If no filter is specified, it makes no
+difference whether the filtering isn't performed in the kernel or isn't
+performed in user mode. :-))
+
+The option for this is the CONFIG_FILTER option; the "Configure.help"
+file says:
+
+	Socket filtering
+	CONFIG_FILTER
+	  The Linux Socket Filter is derived from the Berkeley Packet Filter.
+	  If you say Y here, user-space programs can attach a filter to any
+	  socket and thereby tell the kernel that it should allow or disallow
+	  certain types of data to get through the socket. Linux Socket
+	  Filtering works on all socket types except TCP for now. See the text
+	  file linux/Documentation/networking/filter.txt for more information.
+	  If unsure, say N.
diff --git a/contrib/libpcap/TODO b/contrib/libpcap/TODO
new file mode 100644
index 0000000..e90b9d8
--- /dev/null
+++ b/contrib/libpcap/TODO
@@ -0,0 +1,38 @@
+ TODO list for libpcap
+=======================
+
+Important stuff (to be done before the next release)
+---------------
+
+General
+
+- configure should not be in the CVS. Most open source projects have an 
+  autogen.sh script to run autoconf etc. after checkout. I think we 
+  should stick to the standard. 
+
+- The source files should be better documented. There is no official 
+  design guideline what is done where. There should be a common coding
+  style (okay, you can guess that bye looking at the code) and a guideline
+  what needs to be documented.
+
+Linux kernel interface
+
+- Currently there is a race condition in that a socket is activated at the
+  same time when it is opened - before applying a filter. This has to 
+  be corrected so that capture starts when pcap_read is called for the 
+  first time. 
+
+Less urgent items
+-----------------
+
+- Better documentation and cleanup of the interface. I am seeing a few  
+  problems at the first glance which needs fixing:
+  + pcap_lookupnet makes little to no sense with protocols != IPv4
+  + not very suited for interactive programs (think ethereal). There should 
+    be a way for the application to get a file descriptor which it has to
+    monitor and a callback in pcap which has to be called on activity
+  + too many functions. There are a lot of functions for everything which
+    violates the KISS principle. Why do we need pcap_strerror, pcap_perror
+    and pcap_geterr?
+  + the manpage has a brief description of each function but where is the
+    big picture? Seems like you need to buy UNP for that...
diff --git a/contrib/libpcap/VERSION b/contrib/libpcap/VERSION
index 2eb3c4f..5a2a580 100644
--- a/contrib/libpcap/VERSION
+++ b/contrib/libpcap/VERSION
@@ -1 +1 @@
-0.5
+0.6
diff --git a/contrib/libpcap/bpf/net/bpf_filter.c b/contrib/libpcap/bpf/net/bpf_filter.c
index f274542..d47503f 100644
--- a/contrib/libpcap/bpf/net/bpf_filter.c
+++ b/contrib/libpcap/bpf/net/bpf_filter.c
@@ -38,17 +38,30 @@
  *	@(#)bpf.c	7.5 (Berkeley) 7/15/91
  */
 
-#if !(defined(lint) || defined(KERNEL))
+#if !(defined(lint) || defined(KERNEL) || defined(_KERNEL))
 static const char rcsid[] =
-    "@(#) $Header: /tcpdump/master/libpcap/bpf/net/bpf_filter.c,v 1.33.1.1 1999/10/07 23:46:41 mcr Exp $ (LBL)";
+    "@(#) $Header: /tcpdump/master/libpcap/bpf/net/bpf_filter.c,v 1.35 2000/10/23 19:32:21 fenner Exp $ (LBL)";
 #endif
 
 #include <sys/param.h>
 #include <sys/types.h>
 #include <sys/time.h>
+
+#define	SOLARIS	(defined(sun) && (defined(__SVR4) || defined(__svr4__)))
+#if defined(__hpux) || SOLARIS
+# include <sys/sysmacros.h>
+# include <sys/stream.h>
+# define	mbuf	msgb
+# define	m_next	b_cont
+# define	MLEN(m)	((m)->b_wptr - (m)->b_rptr)
+# define	mtod(m,t)	((t)(m)->b_rptr)
+#else
+# define	MLEN(m)	((m)->m_len)
+#endif
+
 #include <net/bpf.h>
 
-#ifndef KERNEL
+#if !defined(KERNEL) && !defined(_KERNEL)
 #include <stdlib.h>
 #endif
 
@@ -79,17 +92,19 @@ static const char rcsid[] =
 		 (u_int32)*((u_char *)p+3)<<0)
 #endif
 
-#ifdef KERNEL
+#if defined(KERNEL) || defined(_KERNEL)
+# if !defined(__hpux) && !SOLARIS
 #include <sys/mbuf.h>
-#define MINDEX(len, m, k) \
+# endif
+#define MINDEX(len, _m, _k) \
 { \
-	len = m->m_len; \
-	while (k >= len) { \
-		k -= len; \
-		m = m->m_next; \
-		if (m == 0) \
+	len = MLEN(m); \
+	while ((_k) >= len) { \
+		(_k) -= len; \
+		(_m) = (_m)->m_next; \
+		if ((_m) == 0) \
 			return 0; \
-		len = m->m_len; \
+		len = MLEN(m); \
 	} \
 }
 
@@ -109,7 +124,7 @@ m_xword(m, k, err)
 		return EXTRACT_LONG(cp);
 	}
 	m0 = m->m_next;
-	if (m0 == 0 || m0->m_len + len - k < 4)
+	if (m0 == 0 || MLEN(m0) + len - k < 4)
 		goto bad;
 	*err = 0;
 	np = mtod(m0, u_char *);
@@ -159,6 +174,8 @@ m_xhalf(m, k, err)
  * Execute the filter program starting at pc on the packet p
  * wirelen is the length of the original packet
  * buflen is the amount of data present
+ * For the kernel, p is assumed to be a pointer to an mbuf if buflen is 0,
+ * in all other cases, p is a pointer to a buffer and buflen is its size.
  */
 u_int
 bpf_filter(pc, p, wirelen, buflen)
@@ -170,6 +187,17 @@ bpf_filter(pc, p, wirelen, buflen)
 	register u_int32 A, X;
 	register int k;
 	int32 mem[BPF_MEMWORDS];
+#if defined(KERNEL) || defined(_KERNEL)
+	struct mbuf *m, *n;
+	int merr, len;
+
+	if (buflen == 0) {
+		m = (struct mbuf *)p;
+		p = mtod(m, u_char *);
+		buflen = MLEN(m);
+	} else
+		m = NULL;
+#endif
 
 	if (pc == 0)
 		/*
@@ -184,7 +212,7 @@ bpf_filter(pc, p, wirelen, buflen)
 		switch (pc->code) {
 
 		default:
-#ifdef KERNEL
+#if defined(KERNEL) || defined(_KERNEL)
 			return 0;
 #else
 			abort();
@@ -198,12 +226,10 @@ bpf_filter(pc, p, wirelen, buflen)
 		case BPF_LD|BPF_W|BPF_ABS:
 			k = pc->k;
 			if (k + sizeof(int32) > buflen) {
-#ifdef KERNEL
-				int merr;
-
-				if (buflen != 0)
+#if defined(KERNEL) || defined(_KERNEL)
+				if (m == NULL)
 					return 0;
-				A = m_xword((struct mbuf *)p, k, &merr);
+				A = m_xword(m, k, &merr);
 				if (merr != 0)
 					return 0;
 				continue;
@@ -217,12 +243,12 @@ bpf_filter(pc, p, wirelen, buflen)
 		case BPF_LD|BPF_H|BPF_ABS:
 			k = pc->k;
 			if (k + sizeof(short) > buflen) {
-#ifdef KERNEL
-				int merr;
-
-				if (buflen != 0)
+#if defined(KERNEL) || defined(_KERNEL)
+				if (m == NULL)
+					return 0;
+				A = m_xhalf(m, k, &merr);
+				if (merr != 0)
 					return 0;
-				A = m_xhalf((struct mbuf *)p, k, &merr);
 				continue;
 #else
 				return 0;
@@ -234,15 +260,12 @@ bpf_filter(pc, p, wirelen, buflen)
 		case BPF_LD|BPF_B|BPF_ABS:
 			k = pc->k;
 			if (k >= buflen) {
-#ifdef KERNEL
-				register struct mbuf *m;
-				register int len;
-
-				if (buflen != 0)
+#if defined(KERNEL) || defined(_KERNEL)
+				if (m == NULL)
 					return 0;
-				m = (struct mbuf *)p;
-				MINDEX(len, m, k);
-				A = mtod(m, u_char *)[k];
+				n = m;
+				MINDEX(len, n, k);
+				A = mtod(n, u_char *)[k];
 				continue;
 #else
 				return 0;
@@ -262,12 +285,10 @@ bpf_filter(pc, p, wirelen, buflen)
 		case BPF_LD|BPF_W|BPF_IND:
 			k = X + pc->k;
 			if (k + sizeof(int32) > buflen) {
-#ifdef KERNEL
-				int merr;
-
-				if (buflen != 0)
+#if defined(KERNEL) || defined(_KERNEL)
+				if (m == NULL)
 					return 0;
-				A = m_xword((struct mbuf *)p, k, &merr);
+				A = m_xword(m, k, &merr);
 				if (merr != 0)
 					return 0;
 				continue;
@@ -281,12 +302,10 @@ bpf_filter(pc, p, wirelen, buflen)
 		case BPF_LD|BPF_H|BPF_IND:
 			k = X + pc->k;
 			if (k + sizeof(short) > buflen) {
-#ifdef KERNEL
-				int merr;
-
-				if (buflen != 0)
+#if defined(KERNEL) || defined(_KERNEL)
+				if (m == NULL)
 					return 0;
-				A = m_xhalf((struct mbuf *)p, k, &merr);
+				A = m_xhalf(m, k, &merr);
 				if (merr != 0)
 					return 0;
 				continue;
@@ -300,15 +319,12 @@ bpf_filter(pc, p, wirelen, buflen)
 		case BPF_LD|BPF_B|BPF_IND:
 			k = X + pc->k;
 			if (k >= buflen) {
-#ifdef KERNEL
-				register struct mbuf *m;
-				register int len;
-
-				if (buflen != 0)
+#if defined(KERNEL) || defined(_KERNEL)
+				if (m == NULL)
 					return 0;
-				m = (struct mbuf *)p;
-				MINDEX(len, m, k);
-				A = mtod(m, u_char *)[k];
+				n = m;
+				MINDEX(len, n, k);
+				A = mtod(n, u_char *)[k];
 				continue;
 #else
 				return 0;
@@ -320,15 +336,12 @@ bpf_filter(pc, p, wirelen, buflen)
 		case BPF_LDX|BPF_MSH|BPF_B:
 			k = pc->k;
 			if (k >= buflen) {
-#ifdef KERNEL
-				register struct mbuf *m;
-				register int len;
-
-				if (buflen != 0)
+#if defined(KERNEL) || defined(_KERNEL)
+				if (m == NULL)
 					return 0;
-				m = (struct mbuf *)p;
-				MINDEX(len, m, k);
-				X = (mtod(m, char *)[k] & 0xf) << 2;
+				n = m;
+				MINDEX(len, n, k);
+				X = (mtod(n, char *)[k] & 0xf) << 2;
 				continue;
 #else
 				return 0;
@@ -478,7 +491,7 @@ bpf_filter(pc, p, wirelen, buflen)
 	}
 }
 
-#ifdef KERNEL
+
 /*
  * Return true if the 'fcode' is a valid filter program.
  * The constraints are that each jump be forward and to a valid
@@ -529,4 +542,3 @@ bpf_validate(f, len)
 	}
 	return BPF_CLASS(f[len - 1].code) == BPF_RET;
 }
-#endif
diff --git a/contrib/libpcap/bpf_dump.c b/contrib/libpcap/bpf_dump.c
new file mode 100644
index 0000000..85e1c97
--- /dev/null
+++ b/contrib/libpcap/bpf_dump.c
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 1992, 1993, 1994, 1995, 1996
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that: (1) source code distributions
+ * retain the above copyright notice and this paragraph in its entirety, (2)
+ * distributions including binary code include the above copyright notice and
+ * this paragraph in its entirety in the documentation or other materials
+ * provided with the distribution, and (3) all advertising materials mentioning
+ * features or use of this software display the following acknowledgement:
+ * ``This product includes software developed by the University of California,
+ * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
+ * the University nor the names of its contributors may be used to endorse
+ * or promote products derived from this software without specific prior
+ * written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#ifndef lint
+static const char rcsid[] =
+    "@(#) $Header: /tcpdump/master/libpcap/bpf_dump.c,v 1.12 2000/06/26 04:17:05 assar Exp $ (LBL)";
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <sys/types.h>
+#include <sys/time.h>
+
+#include <pcap.h>
+#include <stdio.h>
+
+void
+bpf_dump(struct bpf_program *p, int option)
+{
+	struct bpf_insn *insn;
+	int i;
+	int n = p->bf_len;
+
+	insn = p->bf_insns;
+	if (option > 2) {
+		printf("%d\n", n);
+		for (i = 0; i < n; ++insn, ++i) {
+			printf("%u %u %u %u\n", insn->code,
+			       insn->jt, insn->jf, insn->k);
+		}
+		return ;
+	}
+	if (option > 1) {
+		for (i = 0; i < n; ++insn, ++i)
+			printf("{ 0x%x, %d, %d, 0x%08x },\n",
+			       insn->code, insn->jt, insn->jf, insn->k);
+		return;
+	}
+	for (i = 0; i < n; ++insn, ++i) {
+#ifdef BDEBUG
+		extern int bids[];
+		printf(bids[i] > 0 ? "[%02d]" : " -- ", bids[i] - 1);
+#endif
+		puts(bpf_image(insn, i));
+	}
+}
diff --git a/contrib/libpcap/bpf_image.c b/contrib/libpcap/bpf_image.c
index 1cee698..1e178bf 100644
--- a/contrib/libpcap/bpf_image.c
+++ b/contrib/libpcap/bpf_image.c
@@ -21,7 +21,11 @@
 
 #ifndef lint
 static const char rcsid[] =
-    "@(#) $Header: /tcpdump/master/libpcap/bpf_image.c,v 1.22.1.1 1999/10/07 23:46:40 mcr Exp $ (LBL)";
+    "@(#) $Header: /tcpdump/master/libpcap/bpf_image.c,v 1.24 2000/07/11 00:37:04 assar Exp $ (LBL)";
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
 #endif
 
 #include <sys/types.h>
@@ -32,7 +36,6 @@ static const char rcsid[] =
 
 #include "pcap-int.h"
 
-#include "gnuc.h"
 #ifdef HAVE_OS_PROTO_H
 #include "os-proto.h"
 #endif
@@ -277,8 +280,8 @@ bpf_image(p, n)
 		fmt = "";
 		break;
 	}
-	(void)sprintf(operand, fmt, v);
-	(void)sprintf(image,
+	(void)snprintf(operand, sizeof operand, fmt, v);
+	(void)snprintf(image, sizeof image,
 		      (BPF_CLASS(p->code) == BPF_JMP &&
 		       BPF_OP(p->code) != BPF_JA) ?
 		      "(%03d) %-8s %-16s jt %d\tjf %d"
diff --git a/contrib/libpcap/config.guess b/contrib/libpcap/config.guess
index e9e4455..980ea5b 100755
--- a/contrib/libpcap/config.guess
+++ b/contrib/libpcap/config.guess
@@ -1,7 +1,10 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 93, 94, 95, 1996 Free Software Foundation, Inc.
-#
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
+#   Free Software Foundation, Inc.
+
+timestamp='2000-12-15'
+
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2 of the License, or
@@ -22,19 +25,97 @@
 # the same distribution terms that you use for the rest of that program.
 
 # Written by Per Bothner <bothner@cygnus.com>.
-# The master version of this file is at the FSF in /home/gd/gnu/lib.
+# Please send patches to <config-patches@gnu.org>.
 #
 # This script attempts to guess a canonical system name similar to
 # config.sub.  If it succeeds, it prints the system name on stdout, and
 # exits with 0.  Otherwise, it exits with 1.
 #
 # The plan is that this can be called by configure scripts if you
-# don't specify an explicit system type (host/target name).
+# don't specify an explicit build system type.
 #
 # Only a few systems have been added to this list; please add others
 # (but try to keep the structure clean).
 #
 
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 93, 94, 95, 96, 97, 98, 99, 2000
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit 0 ;;
+    --version | -v )
+       echo "$version" ; exit 0 ;;
+    --help | --h* | -h )
+       echo "$usage"; exit 0 ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+
+dummy=dummy-$$
+trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script.
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int dummy(){}" > $dummy.c
+	for c in cc gcc c89 ; do
+	  ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1
+	  if test $? = 0 ; then
+	     CC_FOR_BUILD="$c"; break
+	  fi
+	done
+	rm -f $dummy.c $dummy.o
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac
+
 # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
 # (ghazi@noc.rutgers.edu 8/24/94.)
 if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
@@ -43,37 +124,162 @@ fi
 
 UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
 UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
 UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 
-trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15
-
 # Note: order is significant - the case branches are not exclusive.
 
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+	# Netbsd (nbsd) targets should (where applicable) match one or
+	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	# Determine the machine/vendor (is the vendor relevant).
+	case "${UNAME_MACHINE}" in
+	    amiga) machine=m68k-unknown ;;
+	    arm32) machine=arm-unknown ;;
+	    atari*) machine=m68k-atari ;;
+	    sun3*) machine=m68k-sun ;;
+	    mac68k) machine=m68k-apple ;;
+	    macppc) machine=powerpc-apple ;;
+	    hp3[0-9][05]) machine=m68k-hp ;;
+	    ibmrt|romp-ibm) machine=romp-ibm ;;
+	    *) machine=${UNAME_MACHINE}-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently, or will in the future.
+	case "${UNAME_MACHINE}" in
+	    i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k)
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep __ELF__ >/dev/null
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+	        os=netbsd
+		;;
+	esac
+	# The OS release
+	release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "${machine}-${os}${release}"
+	exit 0 ;;
     alpha:OSF1:*:*)
+	if test $UNAME_RELEASE = "V4.0"; then
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+	fi
 	# A Vn.n version is a released version.
 	# A Tn.n version is a released field test version.
 	# A Xn.n version is an unreleased experimental baselevel.
 	# 1.2 uses "1.2" for uname -r.
-	echo alpha-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//'`
+	cat <<EOF >$dummy.s
+	.data
+\$Lformat:
+	.byte 37,100,45,37,120,10,0	# "%d-%x\n"
+
+	.text
+	.globl main
+	.align 4
+	.ent main
+main:
+	.frame \$30,16,\$26,0
+	ldgp \$29,0(\$27)
+	.prologue 1
+	.long 0x47e03d80 # implver \$0
+	lda \$2,-1
+	.long 0x47e20c21 # amask \$2,\$1
+	lda \$16,\$Lformat
+	mov \$0,\$17
+	not \$1,\$18
+	jsr \$26,printf
+	ldgp \$29,0(\$26)
+	mov 0,\$16
+	jsr \$26,exit
+	.end main
+EOF
+	$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+	if test "$?" = 0 ; then
+		case `./$dummy` in
+			0-0)
+				UNAME_MACHINE="alpha"
+				;;
+			1-0)
+				UNAME_MACHINE="alphaev5"
+				;;
+			1-1)
+				UNAME_MACHINE="alphaev56"
+				;;
+			1-101)
+				UNAME_MACHINE="alphapca56"
+				;;
+			2-303)
+				UNAME_MACHINE="alphaev6"
+				;;
+			2-307)
+				UNAME_MACHINE="alphaev67"
+				;;
+		esac
+	fi
+	rm -f $dummy.s $dummy
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	exit 0 ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
 	exit 0 ;;
     21064:Windows_NT:50:3)
 	echo alpha-dec-winnt3.5
 	exit 0 ;;
     Amiga*:UNIX_System_V:4.0:*)
-	echo m68k-cbm-sysv4
+	echo m68k-unknown-sysv4
 	exit 0;;
-    amiga:NetBSD:*:*)
-      echo m68k-cbm-netbsd${UNAME_RELEASE}
-      exit 0 ;;
     amiga:OpenBSD:*:*)
-      echo m68k-cbm-openbsd${UNAME_RELEASE}
-      exit 0 ;;
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit 0 ;;
+    arc64:OpenBSD:*:*)
+	echo mips64el-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    arc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    hkmips:OpenBSD:*:*)
+	echo mips-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    pmax:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sgi:OpenBSD:*:*)
+	echo mips-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    wgrisc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit 0 ;;
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
 	exit 0;;
-    Pyramid*:OSx*:*:*|MIS*:OSx*:*:*)
+    SR2?01:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit 0;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
 	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
 	if test "`(/bin/universe) 2>/dev/null`" = att ; then
 		echo pyramid-pyramid-sysv3
@@ -81,9 +287,12 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 		echo pyramid-pyramid-bsd
 	fi
 	exit 0 ;;
-    NILE:*:*:dcosx)
+    NILE*:*:*:dcosx)
 	echo pyramid-pyramid-svr4
 	exit 0 ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit 0 ;;
@@ -108,26 +317,61 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     sun3*:SunOS:*:*)
 	echo m68k-sun-sunos${UNAME_RELEASE}
 	exit 0 ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit 0 ;;
     aushp:SunOS:*:*)
 	echo sparc-auspex-sunos${UNAME_RELEASE}
 	exit 0 ;;
-    atari*:NetBSD:*:*)
-	echo m68k-atari-netbsd${UNAME_RELEASE}
-	exit 0 ;;
     atari*:OpenBSD:*:*)
-	echo m68k-atari-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sun3*:NetBSD:*:*)
-	echo m68k-sun-netbsd${UNAME_RELEASE}
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit 0 ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+        exit 0 ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
 	exit 0 ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+        echo m68k-milan-mint${UNAME_RELEASE}
+        exit 0 ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+        echo m68k-hades-mint${UNAME_RELEASE}
+        exit 0 ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+        echo m68k-unknown-mint${UNAME_RELEASE}
+        exit 0 ;;
     sun3*:OpenBSD:*:*)
-	echo m68k-sun-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mac68k:NetBSD:*:*)
-	echo m68k-apple-netbsd${UNAME_RELEASE}
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
     mac68k:OpenBSD:*:*)
-	echo m68k-apple-openbsd${UNAME_RELEASE}
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme88k:OpenBSD:*:*)
+	echo m88k-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
     powerpc:machten:*:*)
 	echo powerpc-apple-machten${UNAME_RELEASE}
@@ -141,9 +385,17 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     VAX*:ULTRIX*:*:*)
 	echo vax-dec-ultrix${UNAME_RELEASE}
 	exit 0 ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit 0 ;;
     mips:*:*:UMIPS | mips:*:*:RISCos)
-	sed 's/^	//' << EOF >dummy.c
-	int main (argc, argv) int argc; char **argv; {
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
 	#if defined (host_mips) && defined (MIPSEB)
 	#if defined (SYSTYPE_SYSV)
 	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
@@ -158,10 +410,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	  exit (-1);
 	}
 EOF
-	${CC-cc} dummy.c -o dummy \
-	  && ./dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
-	  && rm dummy.c dummy && exit 0
-	rm -f dummy.c dummy
+	$CC_FOR_BUILD $dummy.c -o $dummy \
+	  && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+	  && rm $dummy.c $dummy && exit 0
+	rm -f $dummy.c $dummy
 	echo mips-mips-riscos${UNAME_RELEASE}
 	exit 0 ;;
     Night_Hawk:Power_UNIX:*:*)
@@ -179,15 +431,18 @@ EOF
     AViiON:dgux:*:*)
         # DG/UX returns AViiON for all architectures
         UNAME_PROCESSOR=`/usr/bin/uname -p`
-        if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then
-	if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
-	     -o ${TARGET_BINARY_INTERFACE}x = x ] ; then
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
 		echo m88k-dg-dgux${UNAME_RELEASE}
-	else
+	    else
 		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
 	fi
-        else echo i586-dg-dgux${UNAME_RELEASE}
-        fi
  	exit 0 ;;
     M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
 	echo m88k-dolphin-sysv3
@@ -213,7 +468,7 @@ EOF
 	exit 0 ;;
     *:AIX:2:3)
 	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-		sed 's/^		//' << EOF >dummy.c
+		sed 's/^		//' << EOF >$dummy.c
 		#include <sys/systemcfg.h>
 
 		main()
@@ -224,8 +479,8 @@ EOF
 			exit(0);
 			}
 EOF
-		${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
-		rm -f dummy.c dummy
+		$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+		rm -f $dummy.c $dummy
 		echo rs6000-ibm-aix3.2.5
 	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
 		echo rs6000-ibm-aix3.2.4
@@ -234,7 +489,8 @@ EOF
 	fi
 	exit 0 ;;
     *:AIX:*:4)
-	if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then
 		IBM_ARCH=rs6000
 	else
 		IBM_ARCH=powerpc
@@ -246,13 +502,26 @@ EOF
 	fi
 	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
 	exit 0 ;;
+    *:AIX:*:5)
+	case "`lsattr -El proc0 -a type -F value`" in
+	    PowerPC*) IBM_ARCH=powerpc
+		      IBM_MANUF=ibm ;;
+	    Itanium)  IBM_ARCH=ia64
+		      IBM_MANUF=unknown ;;
+	    POWER*)   IBM_ARCH=power
+		      IBM_MANUF=ibm ;;
+	    *)        IBM_ARCH=powerpc
+		      IBM_MANUF=ibm ;;
+	esac
+	echo ${IBM_ARCH}-${IBM_MANUF}-aix${UNAME_VERSION}.${UNAME_RELEASE}
+	exit 0 ;;
     *:AIX:*:*)
 	echo rs6000-ibm-aix
 	exit 0 ;;
     ibmrt:4.4BSD:*|romp-ibm:BSD:*)
 	echo romp-ibm-bsd4.4
 	exit 0 ;;
-    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC NetBSD and
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
 	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
 	exit 0 ;;                           # report: romp-ibm BSD 4.3
     *:BOSX:*:*)
@@ -267,18 +536,71 @@ EOF
     hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
 	echo m68k-hp-bsd4.4
 	exit 0 ;;
-    9000/[3478]??:HP-UX:*:*)
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
 	case "${UNAME_MACHINE}" in
 	    9000/31? )            HP_ARCH=m68000 ;;
 	    9000/[34]?? )         HP_ARCH=m68k ;;
-	    9000/7?? | 9000/8?[1679] ) HP_ARCH=hppa1.1 ;;
-	    9000/8?? )            HP_ARCH=hppa1.0 ;;
+	    9000/[678][0-9][0-9])
+              case "${HPUX_REV}" in
+                11.[0-9][0-9])
+                  if [ -x /usr/bin/getconf ]; then
+                    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+                    case "${sc_cpu_version}" in
+                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+                      532)                      # CPU_PA_RISC2_0
+                        case "${sc_kernel_bits}" in
+                          32) HP_ARCH="hppa2.0n" ;;
+                          64) HP_ARCH="hppa2.0w" ;;
+                        esac ;;
+                    esac
+                  fi ;;
+              esac
+              if [ "${HP_ARCH}" = "" ]; then
+              sed 's/^              //' << EOF >$dummy.c
+
+              #define _HPUX_SOURCE
+              #include <stdlib.h>
+              #include <unistd.h>
+
+              int main ()
+              {
+              #if defined(_SC_KERNEL_BITS)
+                  long bits = sysconf(_SC_KERNEL_BITS);
+              #endif
+                  long cpu  = sysconf (_SC_CPU_VERSION);
+
+                  switch (cpu)
+              	{
+              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+              	case CPU_PA_RISC2_0:
+              #if defined(_SC_KERNEL_BITS)
+              	    switch (bits)
+              		{
+              		case 64: puts ("hppa2.0w"); break;
+              		case 32: puts ("hppa2.0n"); break;
+              		default: puts ("hppa2.0"); break;
+              		} break;
+              #else  /* !defined(_SC_KERNEL_BITS) */
+              	    puts ("hppa2.0"); break;
+              #endif
+              	default: puts ("hppa1.0"); break;
+              	}
+                  exit (0);
+              }
+EOF
+	(CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
+	if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
+	rm -f $dummy.c $dummy
+	fi ;;
 	esac
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
 	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
 	exit 0 ;;
     3050*:HI-UX:*:*)
-	sed 's/^	//' << EOF >dummy.c
+	sed 's/^	//' << EOF >$dummy.c
 	#include <unistd.h>
 	int
 	main ()
@@ -303,8 +625,8 @@ EOF
 	  exit (0);
 	}
 EOF
-	${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
-	rm -f dummy.c dummy
+	$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+	rm -f $dummy.c $dummy
 	echo unknown-hitachi-hiuxwe2
 	exit 0 ;;
     9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
@@ -313,6 +635,9 @@ EOF
     9000/8??:4.3bsd:*:*)
 	echo hppa1.0-hp-bsd
 	exit 0 ;;
+    *9??*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit 0 ;;
     hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
 	echo hppa1.1-hp-osf
 	exit 0 ;;
@@ -329,6 +654,9 @@ EOF
     parisc*:Lites*:*:*)
 	echo hppa1.1-hp-lites
 	exit 0 ;;
+    hppa*:OpenBSD:*:*)
+	echo hppa-unknown-openbsd
+	exit 0 ;;
     C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
 	echo c1-convex-bsd
         exit 0 ;;
@@ -359,101 +687,334 @@ EOF
 	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
 	exit 0 ;;
     CRAY*TS:*:*:*)
-	echo t90-cray-unicos${UNAME_RELEASE}
+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY*T3D:*:*:*)
+	echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
 	exit 0 ;;
     CRAY-2:*:*:*)
 	echo cray2-cray-unicos
         exit 0 ;;
     F300:UNIX_System_V:*:*)
-        FUJITSU_SYS=`uname -p | tr [A-Z] [a-z] | sed -e 's/\///'`
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
         FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
         echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
         exit 0 ;;
     F301:UNIX_System_V:*:*)
        echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
        exit 0 ;;
-    hp3[0-9][05]:NetBSD:*:*)
-	echo m68k-hp-netbsd${UNAME_RELEASE}
-	exit 0 ;;
-    hp3[0-9][05]:OpenBSD:*:*)
-	echo m68k-hp-openbsd${UNAME_RELEASE}
+    hp300:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
-    i?86:BSD/386:*:* | *:BSD/OS:*:*)
+    i?86:BSD/386:*:* | i?86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
 	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
 	exit 0 ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit 0 ;;
     *:FreeBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
 	exit 0 ;;
-    *:NetBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-	exit 0 ;;
     *:OpenBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
 	exit 0 ;;
     i*:CYGWIN*:*)
-	echo i386-pc-cygwin32
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit 0 ;;
+    i*:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit 0 ;;
+    i*:PW*:*)
+	echo ${UNAME_MACHINE}-pc-pw32
+	exit 0 ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i386-pc-interix
+	exit 0 ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
 	exit 0 ;;
     p*:CYGWIN*:*)
-	echo powerpcle-unknown-cygwin32
+	echo powerpcle-unknown-cygwin
 	exit 0 ;;
     prep*:SunOS:5.*:*)
 	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit 0 ;;
     *:GNU:*:*)
-	echo `echo ${UNAME_MACHINE}|sed -e 's,/.*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit 0 ;;
+    i*86:Minix:*:*)
+	echo ${UNAME_MACHINE}-pc-minix
 	exit 0 ;;
     *:Linux:*:*)
+
 	# The BFD linker knows what the default object file format is, so
-	# first see if it will tell us.
-	ld_help_string=`ld --help 2>&1`
-	if echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: elf_i.86"; then
-	  echo "${UNAME_MACHINE}-pc-linux-gnu" ; exit 0
-	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: i.86linux"; then
-	  echo "${UNAME_MACHINE}-pc-linux-gnuaout" ; exit 0
-	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: i.86coff"; then
-	  echo "${UNAME_MACHINE}-pc-linux-gnucoff" ; exit 0
-	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: m68kelf"; then
-	  echo "${UNAME_MACHINE}-unknown-linux-gnu" ; exit 0
-	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: m68klinux"; then
-	  echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0
-	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: elf32ppc"; then
-	  echo "powerpc-unknown-linux-gnu" ; exit 0
-	elif test "${UNAME_MACHINE}" = "alpha" ; then
-	  echo alpha-unknown-linux-gnu ; exit 0
-	elif test "${UNAME_MACHINE}" = "sparc" ; then
-	  echo sparc-unknown-linux-gnu ; exit 0
+	# first see if it will tell us. cd to the root directory to prevent
+	# problems with other programs or directories called `ld' in the path.
+	ld_supported_emulations=`cd /; ld --help 2>&1 \
+			 | sed -ne '/supported emulations:/!d
+				    s/[ 	][ 	]*/ /g
+				    s/.*supported emulations: *//
+				    s/ .*//
+				    p'`
+        case "$ld_supported_emulations" in
+	  *ia64)
+		echo "${UNAME_MACHINE}-unknown-linux"
+		exit 0
+		;;
+	  i?86linux)
+		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		exit 0
+		;;
+	  elf_i?86)
+		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+		;;
+	  i?86coff)
+		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+		exit 0
+		;;
+	  sparclinux)
+		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+		exit 0
+		;;
+	  elf32_sparc)
+		echo "${UNAME_MACHINE}-unknown-linux-gnu"
+		exit 0
+		;;
+	  armlinux)
+		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+		exit 0
+		;;
+	  elf32arm*)
+		echo "${UNAME_MACHINE}-unknown-linux-gnuoldld"
+		exit 0
+		;;
+	  armelf_linux*)
+		echo "${UNAME_MACHINE}-unknown-linux-gnu"
+		exit 0
+		;;
+	  m68klinux)
+		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+		exit 0
+		;;
+	  elf32ppc | elf32ppclinux)
+		# Determine Lib Version
+		cat >$dummy.c <<EOF
+#include <features.h>
+#if defined(__GLIBC__)
+extern char __libc_version[];
+extern char __libc_release[];
+#endif
+main(argc, argv)
+     int argc;
+     char *argv[];
+{
+#if defined(__GLIBC__)
+  printf("%s %s\n", __libc_version, __libc_release);
+#else
+  printf("unkown\n");
+#endif
+  return 0;
+}
+EOF
+		LIBC=""
+		$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
+		if test "$?" = 0 ; then
+			./$dummy | grep 1\.99 > /dev/null
+			if test "$?" = 0 ; then
+				LIBC="libc1"
+			fi
+		fi
+		rm -f $dummy.c $dummy
+		echo powerpc-unknown-linux-gnu${LIBC}
+		exit 0
+		;;
+	  shelf_linux)
+		echo "${UNAME_MACHINE}-unknown-linux-gnu"
+		exit 0
+		;;
+	esac
+
+	if test "${UNAME_MACHINE}" = "alpha" ; then
+		cat <<EOF >$dummy.s
+			.data
+		\$Lformat:
+			.byte 37,100,45,37,120,10,0	# "%d-%x\n"
+
+			.text
+			.globl main
+			.align 4
+			.ent main
+		main:
+			.frame \$30,16,\$26,0
+			ldgp \$29,0(\$27)
+			.prologue 1
+			.long 0x47e03d80 # implver \$0
+			lda \$2,-1
+			.long 0x47e20c21 # amask \$2,\$1
+			lda \$16,\$Lformat
+			mov \$0,\$17
+			not \$1,\$18
+			jsr \$26,printf
+			ldgp \$29,0(\$26)
+			mov 0,\$16
+			jsr \$26,exit
+			.end main
+EOF
+		LIBC=""
+		$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+		if test "$?" = 0 ; then
+			case `./$dummy` in
+			0-0)
+				UNAME_MACHINE="alpha"
+				;;
+			1-0)
+				UNAME_MACHINE="alphaev5"
+				;;
+			1-1)
+				UNAME_MACHINE="alphaev56"
+				;;
+			1-101)
+				UNAME_MACHINE="alphapca56"
+				;;
+			2-303)
+				UNAME_MACHINE="alphaev6"
+				;;
+			2-307)
+				UNAME_MACHINE="alphaev67"
+				;;
+			esac
+
+			objdump --private-headers $dummy | \
+			  grep ld.so.1 > /dev/null
+			if test "$?" = 0 ; then
+				LIBC="libc1"
+			fi
+		fi
+		rm -f $dummy.s $dummy
+		echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
+	elif test "${UNAME_MACHINE}" = "mips" ; then
+	  cat >$dummy.c <<EOF
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+#ifdef __MIPSEB__
+  printf ("%s-unknown-linux-gnu\n", argv[1]);
+#endif
+#ifdef __MIPSEL__
+  printf ("%sel-unknown-linux-gnu\n", argv[1]);
+#endif
+  return 0;
+}
+EOF
+	  $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+	  rm -f $dummy.c $dummy
+	elif test "${UNAME_MACHINE}" = "s390"; then
+	  echo s390-ibm-linux && exit 0
+	elif test "${UNAME_MACHINE}" = "x86_64"; then
+	  echo x86_64-unknown-linux-gnu && exit 0
+	elif test "${UNAME_MACHINE}" = "parisc" -o "${UNAME_MACHINE}" = "hppa"; then
+	  # Look for CPU level
+	  case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	    PA7*)
+		echo hppa1.1-unknown-linux-gnu
+		;;
+	    PA8*)
+		echo hppa2.0-unknown-linux-gnu
+		;;
+	    *)
+		echo hppa-unknown-linux-gnu
+		;;
+	  esac
+	  exit 0
 	else
-	  # Either a pre-BFD a.out linker (linux-gnuoldld) or one that does not give us
-	  # useful --help.  Gcc wants to distinguish between linux-gnuoldld and linux-gnuaout.
-	  test ! -d /usr/lib/ldscripts/. \
+	  # Either a pre-BFD a.out linker (linux-gnuoldld)
+	  # or one that does not give us useful --help.
+	  # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
+	  # If ld does not provide *any* "supported emulations:"
+	  # that means it is gnuoldld.
+	  test -z "$ld_supported_emulations" \
 	    && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
+
+	  case "${UNAME_MACHINE}" in
+	  i?86)
+	    VENDOR=pc;
+	    ;;
+	  *)
+	    VENDOR=unknown;
+	    ;;
+	  esac
 	  # Determine whether the default compiler is a.out or elf
-	  cat >dummy.c <<EOF
-main(argc, argv)
-int argc;
-char *argv[];
-{
+	  cat >$dummy.c <<EOF
+#include <features.h>
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
 #ifdef __ELF__
-  printf ("%s-pc-linux-gnu\n", argv[1]);
+# ifdef __GLIBC__
+#  if __GLIBC__ >= 2
+    printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
+#  else
+    printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+#  endif
+# else
+   printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+# endif
 #else
-  printf ("%s-pc-linux-gnuaout\n", argv[1]);
+  printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
 #endif
   return 0;
 }
 EOF
-	  ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
-	  rm -f dummy.c dummy
+	  $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+	  rm -f $dummy.c $dummy
+	  test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
 	fi ;;
 # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.  earlier versions
 # are messed up and put the nodename in both sysname and nodename.
     i?86:DYNIX/ptx:4*:*)
 	echo i386-sequent-sysv4
 	exit 0 ;;
+    i?86:UNIX_SV:4.2MP:2.*)
+        # Unixware is an offshoot of SVR4, but it has its own version
+        # number series starting with 2...
+        # I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+        # Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit 0 ;;
     i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
 	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-		echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
 	else
-		echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit 0 ;;
+    i?86:*:5:7*)
+        # Fixed at (any) Pentium or better
+        UNAME_MACHINE=i586
+        if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
+	    echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
+	else
+	    echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
 	fi
 	exit 0 ;;
     i?86:*:3.2:*)
@@ -465,11 +1026,24 @@ EOF
 		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
 		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
 			&& UNAME_MACHINE=i586
+		(/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
 		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
 	else
 		echo ${UNAME_MACHINE}-pc-sysv32
 	fi
 	exit 0 ;;
+    i?86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit 0 ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+        # uname -m prints for DJGPP always 'pc', but it prints nothing about
+        # the processor, so we play safe by assuming i386.
+	echo i386-pc-msdosdjgpp
+        exit 0 ;;
     Intel:Mach:3*:*)
 	echo i386-pc-mach3
 	exit 0 ;;
@@ -489,7 +1063,7 @@ EOF
 	exit 0 ;;
     M68*:*:R3V[567]*:*)
 	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-    3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
+    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
 	OS_REL=''
 	test -r /etc/.relid \
 	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
@@ -506,7 +1080,7 @@ EOF
     mc68030:UNIX_System_V:4.*:*)
 	echo m68k-atari-sysv4
 	exit 0 ;;
-    i?86:LynxOS:2.*:*)
+    i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*)
 	echo i386-unknown-lynxos${UNAME_RELEASE}
 	exit 0 ;;
     TSUNAMI:LynxOS:2.*:*)
@@ -518,6 +1092,9 @@ EOF
     SM[BE]S:UNIX_SV:*:*)
 	echo mips-dde-sysv${UNAME_RELEASE}
 	exit 0 ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit 0 ;;
     RM*:SINIX-*:*:*)
 	echo mips-sni-sysv4
 	exit 0 ;;
@@ -529,6 +1106,10 @@ EOF
 		echo ns32k-sni-sysv
 	fi
 	exit 0 ;;
+    PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                           # says <Richard.M.Bartel@ccMail.Census.GOV>
+        echo i586-unisys-sysv4
+        exit 0 ;;
     *:UNIX_System_V:4*:FTX*)
 	# From Gerald Hewes <hewes@openmarket.com>.
 	# How about differentiating between stratus architectures? -djm
@@ -541,23 +1122,83 @@ EOF
     mc68*:A/UX:*:*)
 	echo m68k-apple-aux${UNAME_RELEASE}
 	exit 0 ;;
-    R3000:*System_V*:*:* | R4000:UNIX_SYSV:*:*)
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit 0 ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
 	if [ -d /usr/nec ]; then
 	        echo mips-nec-sysv${UNAME_RELEASE}
 	else
 	        echo mips-unknown-sysv${UNAME_RELEASE}
 	fi
         exit 0 ;;
-    PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-                           # says <Richard.M.Bartel@ccMail.Census.GOV>
-        echo i586-unisys-sysv4
-        exit 0 ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit 0 ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit 0 ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit 0 ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit 0 ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit 0 ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit 0 ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit 0 ;;
+    *:Darwin:*:*)
+	echo `uname -p`-apple-darwin${UNAME_RELEASE}
+	exit 0 ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	if test "${UNAME_MACHINE}" = "x86pc"; then
+		UNAME_MACHINE=pc
+	fi
+	echo `uname -p`-${UNAME_MACHINE}-nto-qnx
+	exit 0 ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit 0 ;;
+    NSR-[KW]:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk${UNAME_RELEASE}
+	exit 0 ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit 0 ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit 0 ;;
+    DS/*:UNIX_System_V:*:*)
+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+	exit 0 ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = "386"; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo ${UNAME_MACHINE}-unknown-plan9
+	exit 0 ;;
+    i?86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit 0 ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
 
-cat >dummy.c <<EOF
+cat >$dummy.c <<EOF
 #ifdef _SEQUENT_
 # include <sys/types.h>
 # include <sys/utsname.h>
@@ -595,7 +1236,10 @@ main ()
 #endif
   int version;
   version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
   exit (0);
 #endif
 
@@ -655,8 +1299,8 @@ main ()
 }
 EOF
 
-${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0
-rm -f dummy.c dummy
+$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0
+rm -f $dummy.c $dummy
 
 # Apollos put the system type in the environment.
 
@@ -688,6 +1332,47 @@ then
     esac
 fi
 
-#echo '(Unable to guess system type)' 1>&2
+cat >&2 <<EOF
+$0: unable to guess system type
+
+The $version version of this script cannot recognize your system type.
+Please download the most up to date version of the config scripts:
+
+    ftp://ftp.gnu.org/pub/gnu/config/
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess version = $version
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
 
 exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/contrib/libpcap/config.h.in b/contrib/libpcap/config.h.in
new file mode 100644
index 0000000..f012a9d
--- /dev/null
+++ b/contrib/libpcap/config.h.in
@@ -0,0 +1,95 @@
+/* config.h.in.  Generated automatically from configure.in by autoheader.  */
+
+/* Define to empty if the keyword does not work.  */
+#undef const
+
+/* Define as __inline if that's what the C compiler calls it.  */
+#undef inline
+
+/* Define if you have the ether_hostton function.  */
+#undef HAVE_ETHER_HOSTTON
+
+/* Define if you have the freeifaddrs function.  */
+#undef HAVE_FREEIFADDRS
+
+/* Define if you have the strerror function.  */
+#undef HAVE_STRERROR
+
+/* Define if you have the strlcpy function.  */
+#undef HAVE_STRLCPY
+
+/* Define if you have the <ifaddrs.h> header file.  */
+#undef HAVE_IFADDRS_H
+
+/* Define if you have the <netinet/if_ether.h> header file.  */
+#undef HAVE_NETINET_IF_ETHER_H
+
+/* Define if you have the <netpacket/packet.h> header file.  */
+#undef HAVE_NETPACKET_PACKET_H
+
+/* Define if you have the <sys/bufmod.h> header file.  */
+#undef HAVE_SYS_BUFMOD_H
+
+/* Define if you have the <sys/dlpi_ext.h> header file.  */
+#undef HAVE_SYS_DLPI_EXT_H
+
+/* Define if you have the <sys/ioccom.h> header file.  */
+#undef HAVE_SYS_IOCCOM_H
+
+/* Define if you have the <sys/sockio.h> header file.  */
+#undef HAVE_SYS_SOCKIO_H
+
+/* needed on HP-UX */
+#undef _HPUX_SOURCE
+
+/* define if your compiler has __attribute__ */
+#undef HAVE___ATTRIBUTE__
+
+/* if we have u_int8_t */
+#undef u_int8_t
+
+/* if we have u_int16_t */
+#undef u_int16_t
+
+/* if we have u_int32_t */
+#undef u_int32_t
+
+/* do not use protochain */
+#undef NO_PROTOCHAIN
+
+/* IPv6 */
+#undef INET6
+
+/* define if you have a /dev/dlpi */
+#undef HAVE_DEV_DLPI
+
+/* /dev/dlpi directory */
+#undef PCAP_DEV_PREFIX
+
+/* define on AIX to get certain functions */
+#undef _SUN
+
+/* on HP-UX 9.x */
+#undef HAVE_HPUX9
+
+/* on HP-UX 10.20 */
+#undef HAVE_HPUX10_20
+
+/* on sinix */
+#undef sinix
+
+/* On solaris */
+#undef HAVE_SOLARIS
+
+/* if there's an os_proto.h */
+#undef HAVE_OS_PROTO_H
+
+/* if struct sockaddr has sa_len */
+#undef HAVE_SOCKADDR_SA_LEN
+
+/* if ppa_info_t_dl_module_id exists */
+#undef HAVE_HP_PPA_INFO_T_DL_MODULE_ID_1
+
+/* if unaligned access fails */
+#undef LBL_ALIGN
+
diff --git a/contrib/libpcap/config.sub b/contrib/libpcap/config.sub
index 0432524..4849dfd 100755
--- a/contrib/libpcap/config.sub
+++ b/contrib/libpcap/config.sub
@@ -1,6 +1,10 @@
 #! /bin/sh
-# Configuration validation subroutine script, version 1.1.
-#   Copyright (C) 1991, 92, 93, 94, 95, 1996 Free Software Foundation, Inc.
+# Configuration validation subroutine script.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
+#   Free Software Foundation, Inc.
+
+timestamp='2000-12-15'
+
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
 # can handle that machine.  It does not imply ALL GNU software can.
@@ -25,6 +29,8 @@
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
+# Please send patches to <config-patches@gnu.org>.
+#
 # Configuration subroutine to validate and canonicalize a configuration type.
 # Supply the specified configuration type as an argument.
 # If it is invalid, we print an error message on stderr and exit with code 1.
@@ -45,30 +51,73 @@
 #	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
 # It is wrong to echo any other type of specification.
 
-if [ x$1 = x ]
-then
-	echo Configuration name missing. 1>&2
-	echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
-	echo "or     $0 ALIAS" 1>&2
-	echo where ALIAS is a recognized configuration type. 1>&2
-	exit 1
-fi
+me=`echo "$0" | sed -e 's,.*/,,'`
 
-# First pass through any local machine types.
-case $1 in
-	*local*)
-		echo $1
-		exit 0
-		;;
-	*)
-	;;
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+       $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 93, 94, 95, 96, 97, 98, 99, 2000
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit 0 ;;
+    --version | -v )
+       echo "$version" ; exit 0 ;;
+    --help | --h* | -h )
+       echo "$usage"; exit 0 ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo $1
+       exit 0;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
 esac
 
 # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  linux-gnu*)
+  nto-qnx* | linux-gnu* | storm-chaos*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
@@ -94,15 +143,25 @@ case $os in
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple)
+	-apple | -axis)
+		os=
+		basic_machine=$1
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
 		os=
 		basic_machine=$1
 		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
 	-hiux*)
 		os=-hiuxwe2
 		;;
 	-sco5)
-		os=sco3.2v5
+		os=-sco3.2v5
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
 	-sco4)
@@ -121,6 +180,9 @@ case $os in
 		os=-sco3.2v2
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-isc)
 		os=-isc2.2
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -143,25 +205,47 @@ case $os in
 	-psos*)
 		os=-psos
 		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
 esac
 
 # Decode aliases for certain CPU-COMPANY combinations.
 case $basic_machine in
 	# Recognize the basic CPU types without company name.
 	# Some are omitted here because they have special meanings below.
-	tahoe | i860 | m68k | m68000 | m88k | ns32k | arm \
-		| arme[lb] | pyramid \
-		| tron | a29k | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 \
-		| alpha | we32k | ns16k | clipper | i370 | sh \
-		| powerpc | powerpcle | 1750a | dsp16xx | mips64 | mipsel \
-		| pdp11 | mips64el | mips64orion | mips64orionel \
-		| sparc | sparclet | sparclite | sparc64)
+	tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc \
+	        | arm | arme[lb] | arm[bl]e | armv[2345] | armv[345][lb] | strongarm | xscale \
+		| pyramid | mn10200 | mn10300 | tron | a29k \
+		| 580 | i960 | h8300 \
+		| x86 | ppcbe | mipsbe | mipsle | shbe | shle \
+		| hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
+		| hppa64 \
+		| alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \
+		| alphaev6[78] \
+		| we32k | ns16k | clipper | i370 | sh | sh[34] \
+		| powerpc | powerpcle \
+		| 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \
+		| mips64orion | mips64orionel | mipstx39 | mipstx39el \
+		| mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
+		| mips64vr5000 | miprs64vr5000el | mcore \
+		| sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \
+		| thumb | d10v | d30v | fr30 | avr)
 		basic_machine=$basic_machine-unknown
 		;;
+	m6811 | m68hc11 | m6812 | m68hc12)
+		# Motorola 68HC11/12.
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65 | pj | pjl)
+		;;
+
 	# We use `pc' rather than `unknown'
 	# because (1) that's what they normally are, and
 	# (2) the word "unknown" tends to confuse beginning users.
-	i[3456]86)
+	i[234567]86 | x86_64)
 	  basic_machine=$basic_machine-pc
 	  ;;
 	# Object if more than one company name word.
@@ -170,23 +254,50 @@ case $basic_machine in
 		exit 1
 		;;
 	# Recognize the basic CPU types with company name.
-	vax-* | tahoe-* | i[3456]86-* | i860-* | m68k-* | m68000-* | m88k-* \
-	      | sparc-* | ns32k-* | fx80-* | arm-* | c[123]* \
-	      | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* | power-* \
-	      | none-* | 580-* | cray2-* | h8300-* | i960-* | xmp-* | ymp-* \
-	      | hppa-* | hppa1.0-* | hppa1.1-* | alpha-* | we32k-* | cydra-* | ns16k-* \
-	      | pn-* | np1-* | xps100-* | clipper-* | orion-* | sparclite-* \
-	      | pdp11-* | sh-* | powerpc-* | powerpcle-* | sparc64-* | mips64-* | mipsel-* \
-	      | mips64el-* | mips64orion-* | mips64orionel-* | f301-*)
+	# FIXME: clean up the formatting here.
+	vax-* | tahoe-* | i[234567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
+	      | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | c[123]* \
+	      | arm-*  | armbe-* | armle-* | armv*-* | strongarm-* | xscale-* \
+	      | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
+	      | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
+	      | xmp-* | ymp-* \
+	      | x86-* | ppcbe-* | mipsbe-* | mipsle-* | shbe-* | shle-* \
+	      | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \
+	      | hppa2.0n-* | hppa64-* \
+	      | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \
+	      | alphaev6[78]-* \
+	      | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
+	      | clipper-* | orion-* \
+	      | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
+	      | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \
+	      | mips64el-* | mips64orion-* | mips64orionel-* \
+	      | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
+	      | mipstx39-* | mipstx39el-* | mcore-* \
+	      | f30[01]-* | s390-* | sv1-* | t3e-* \
+	      | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
+	      | thumb-* | v850-* | d30v-* | tic30-* | c30-* | fr30-* \
+	      | bs2000-* | tic54x-* | c54x-* | x86_64-*)
 		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
 	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
 		basic_machine=m68000-att
 		;;
 	3b*)
 		basic_machine=we32k-att
 		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
 	alliant | fx80)
 		basic_machine=fx80-alliant
 		;;
@@ -202,20 +313,24 @@ case $basic_machine in
 		os=-sysv
 		;;
 	amiga | amiga-*)
-		basic_machine=m68k-cbm
+		basic_machine=m68k-unknown
 		;;
-	amigados)
-		basic_machine=m68k-cbm
-		os=-amigados
+	amigaos | amigados)
+		basic_machine=m68k-unknown
+		os=-amigaos
 		;;
 	amigaunix | amix)
-		basic_machine=m68k-cbm
+		basic_machine=m68k-unknown
 		os=-sysv4
 		;;
 	apollo68)
 		basic_machine=m68k-apollo
 		os=-sysv
 		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
 	aux)
 		basic_machine=m68k-apple
 		os=-aux
@@ -259,6 +374,9 @@ case $basic_machine in
 	crds | unos)
 		basic_machine=m68k-crds
 		;;
+	cris | cris-* | etrax*)
+		basic_machine=cris-axis
+		;;
 	da30 | da30-*)
 		basic_machine=m68k-da30
 		;;
@@ -292,6 +410,10 @@ case $basic_machine in
 	encore | umax | mmax)
 		basic_machine=ns32k-encore
 		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
 	fx2800)
 		basic_machine=i860-alliant
 		;;
@@ -310,6 +432,14 @@ case $basic_machine in
 		basic_machine=h8300-hitachi
 		os=-hms
 		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
 	harris)
 		basic_machine=m88k-harris
 		os=-sysv3
@@ -325,13 +455,30 @@ case $basic_machine in
 		basic_machine=m68k-hp
 		os=-hpux
 		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
 	hp9k2[0-9][0-9] | hp9k31[0-9])
 		basic_machine=m68000-hp
 		;;
 	hp9k3[2-9][0-9])
 		basic_machine=m68k-hp
 		;;
-	hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7)
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
 		basic_machine=hppa1.1-hp
 		;;
 	hp9k8[0-9][0-9] | hp8[0-9][0-9])
@@ -340,27 +487,54 @@ case $basic_machine in
 	hppa-next)
 		os=-nextstep3
 		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
 	i370-ibm* | ibm*)
 		basic_machine=i370-ibm
-		os=-mvs
 		;;
 # I'm not sure what "Sysv32" means.  Should this be sysv3.2?
-	i[3456]86v32)
+	i[34567]86v32)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv32
 		;;
-	i[3456]86v4*)
+	i[34567]86v4*)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv4
 		;;
-	i[3456]86v)
+	i[34567]86v)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv
 		;;
-	i[3456]86sol2)
+	i[34567]86sol2)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-solaris2
 		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	i386-go32 | go32)
+		basic_machine=i386-unknown
+		os=-go32
+		;;
+	i386-mingw32 | mingw32)
+		basic_machine=i386-unknown
+		os=-mingw32
+		;;
+	i[34567]86-pw32 | pw32)
+		basic_machine=i586-unknown
+		os=-pw32
+		;;
 	iris | iris4d)
 		basic_machine=mips-sgi
 		case $os in
@@ -389,16 +563,52 @@ case $basic_machine in
 	miniframe)
 		basic_machine=m68000-convergent
 		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mipsel*-linux*)
+		basic_machine=mipsel-unknown
+		os=-linux-gnu
+		;;
+	mips*-linux*)
+		basic_machine=mips-unknown
+		os=-linux-gnu
+		;;
 	mips3*-*)
 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
 		;;
 	mips3*)
 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
 		;;
+	mmix*)
+		basic_machine=mmix-knuth
+		os=-mmixware
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	msdos)
+		basic_machine=i386-unknown
+		os=-msdos
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
 	ncr3000)
 		basic_machine=i486-ncr
 		os=-sysv4
 		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
 	news | news700 | news800 | news900)
 		basic_machine=m68k-sony
 		os=-newsos
@@ -411,6 +621,10 @@ case $basic_machine in
 		basic_machine=mips-sony
 		os=-newsos
 		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
 	next | m*-next )
 		basic_machine=m68k-next
 		case $os in
@@ -436,9 +650,32 @@ case $basic_machine in
 		basic_machine=i960-intel
 		os=-nindy
 		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	nonstopux)
+		basic_machine=mips-compaq
+		os=-nonstopux
+		;;
 	np1)
 		basic_machine=np1-gould
 		;;
+	nsr-tandem)
+		basic_machine=nsr-tandem
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
 	pa-hitachi)
 		basic_machine=hppa1.1-hitachi
 		os=-hiuxwe2
@@ -456,30 +693,28 @@ case $basic_machine in
         pc532 | pc532-*)
 		basic_machine=ns32k-pc532
 		;;
-	pentium | p5)
-		basic_machine=i586-intel
+	pentium | p5 | k5 | k6 | nexgen)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86 | athlon)
+		basic_machine=i686-pc
 		;;
-	pentiumpro | p6)
-		basic_machine=i686-intel
+	pentiumii | pentium2)
+		basic_machine=i686-pc
 		;;
-	pentium-* | p5-*)
+	pentium-* | p5-* | k5-* | k6-* | nexgen-*)
 		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
-	pentiumpro-* | p6-*)
+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
 		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
-	k5)
-		# We don't have specific support for AMD's K5 yet, so just call it a Pentium
-		basic_machine=i586-amd
-		;;
-	nexen)
-		# We don't have specific support for Nexgen yet, so just call it a Pentium
-		basic_machine=i586-nexgen
+	pentiumii-* | pentium2-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
 	pn)
 		basic_machine=pn-gould
 		;;
-	power)	basic_machine=rs6000-ibm
+	power)	basic_machine=power-ibm
 		;;
 	ppc)	basic_machine=powerpc-unknown
 	        ;;
@@ -494,12 +729,20 @@ case $basic_machine in
 	ps2)
 		basic_machine=i386-ibm
 		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
 	rm[46]00)
 		basic_machine=mips-siemens
 		;;
 	rtpc | rtpc-*)
 		basic_machine=romp-ibm
 		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
 	sequent)
 		basic_machine=i386-sequent
 		;;
@@ -507,6 +750,10 @@ case $basic_machine in
 		basic_machine=sh-hitachi
 		os=-hms
 		;;
+	sparclite-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
 	sps7)
 		basic_machine=m68k-bull
 		os=-sysv2
@@ -514,6 +761,13 @@ case $basic_machine in
 	spur)
 		basic_machine=spur-unknown
 		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
 	sun2)
 		basic_machine=m68000-sun
 		;;
@@ -554,10 +808,28 @@ case $basic_machine in
 	sun386 | sun386i | roadrunner)
 		basic_machine=i386-sun
 		;;
+	sv1)
+		basic_machine=sv1-cray
+		os=-unicos
+		;;
 	symmetry)
 		basic_machine=i386-sequent
 		os=-dynix
 		;;
+	t3e)
+		basic_machine=t3e-cray
+		os=-unicos
+		;;
+	tic54x | c54x*)
+		basic_machine=tic54x-unknown
+		os=-coff
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
 	tower | tower-32)
 		basic_machine=m68k-ncr
 		;;
@@ -569,6 +841,10 @@ case $basic_machine in
 		basic_machine=a29k-nyu
 		os=-sym1
 		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
 	vaxv)
 		basic_machine=vax-dec
 		os=-sysv
@@ -577,7 +853,7 @@ case $basic_machine in
 		basic_machine=vax-dec
 		os=-vms
 		;;
-       vpp*|vx|vx-*)
+	vpp*|vx|vx-*)
                basic_machine=f301-fujitsu
                ;;
 	vxworks960)
@@ -592,6 +868,14 @@ case $basic_machine in
 		basic_machine=a29k-wrs
 		os=-vxworks
 		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
 	xmp)
 		basic_machine=xmp-cray
 		os=-unicos
@@ -599,6 +883,10 @@ case $basic_machine in
         xps | xps100)
 		basic_machine=xps100-honeywell
 		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
 	none)
 		basic_machine=none-none
 		os=-none
@@ -606,8 +894,21 @@ case $basic_machine in
 
 # Here we handle the default manufacturer of certain CPU types.  It is in
 # some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
 	mips)
-		basic_machine=mips-mips
+		if [ x$os = x-linux-gnu ]; then
+			basic_machine=mips-unknown
+		else
+			basic_machine=mips-mips
+		fi
 		;;
 	romp)
 		basic_machine=romp-ibm
@@ -624,7 +925,10 @@ case $basic_machine in
 	we32k)
 		basic_machine=we32k-att
 		;;
-	sparc)
+	sh3 | sh4)
+		basic_machine=sh-unknown
+		;;
+	sparc | sparcv9)
 		basic_machine=sparc-sun
 		;;
         cydra)
@@ -636,6 +940,16 @@ case $basic_machine in
 	orion105)
 		basic_machine=clipper-highlevel
 		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	c4x*)
+		basic_machine=c4x-none
+		os=-coff
+		;;
 	*)
 		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
 		exit 1
@@ -668,9 +982,12 @@ case $os in
 	-solaris)
 		os=-solaris2
 		;;
-	-unixware* | svr4*)
+	-svr4*)
 		os=-sysv4
 		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
 	-gnu/linux*)
 		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
 		;;
@@ -681,17 +998,39 @@ case $os in
 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
 	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
 	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
-	      | -amigados* | -msdos* | -newsos* | -unicos* | -aof* | -aos* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
 	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
-	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \
+	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -cygwin32* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -linux-gnu* | -uxpv*)
+	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* | -storm-chaos*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
+	-qnx*)
+		case $basic_machine in
+		    x86-* | i[34567]86-*)
+			;;
+		    *)
+			os=-nto$os
+			;;
+		esac
+		;;
+	-nto*)
+		os=-nto-qnx
+		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
 	-linux*)
 		os=`echo $os | sed -e 's|linux|linux-gnu|'`
 		;;
@@ -701,6 +1040,12 @@ case $os in
 	-sunos6*)
 		os=`echo $os | sed -e 's|sunos6|solaris3|'`
 		;;
+	-opened*)
+		os=-openedition
+		;;
+	-wince*)
+		os=-wince
+		;;
 	-osfrose*)
 		os=-osfrose
 		;;
@@ -716,12 +1061,18 @@ case $os in
 	-acis*)
 		os=-aos
 		;;
+	-386bsd)
+		os=-bsd
+		;;
 	-ctix* | -uts*)
 		os=-sysv
 		;;
 	-ns2 )
 	        os=-nextstep2
 		;;
+	-nsk*)
+		os=-nsk
+		;;
 	# Preserve the version number of sinix5.
 	-sinix5.*)
 		os=`echo $os | sed -e 's|sinix|sysv|'`
@@ -747,9 +1098,18 @@ case $os in
 	# This must come after -sysvr4.
 	-sysv*)
 		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
 	-xenix)
 		os=-xenix
 		;;
+        -*mint | -*MiNT)
+	        os=-mint
+		;;
 	-none)
 		;;
 	*)
@@ -775,6 +1135,9 @@ case $basic_machine in
 	*-acorn)
 		os=-riscix1.2
 		;;
+	arm*-rebel)
+		os=-linux
+		;;
 	arm*-semi)
 		os=-aout
 		;;
@@ -796,15 +1159,36 @@ case $basic_machine in
 		# default.
 		# os=-sunos4
 		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
 	*-tti)	# must be before sparc entry or we get the wrong os.
 		os=-sysv3
 		;;
 	sparc-* | *-sun)
 		os=-sunos4.1.1
 		;;
+	*-be)
+		os=-beos
+		;;
 	*-ibm)
 		os=-aix
 		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
 	*-hp)
 		os=-hpux
 		;;
@@ -815,7 +1199,7 @@ case $basic_machine in
 		os=-sysv
 		;;
 	*-cbm)
-		os=-amigados
+		os=-amigaos
 		;;
 	*-dg)
 		os=-dgux
@@ -865,9 +1249,21 @@ case $basic_machine in
 	*-masscomp)
 		os=-rtu
 		;;
-	f301-fujitsu)
+	f30[01]-fujitsu)
 		os=-uxpv
 		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
 	*)
 		os=-none
 		;;
@@ -889,9 +1285,15 @@ case $basic_machine in
 			-aix*)
 				vendor=ibm
 				;;
+			-beos*)
+				vendor=be
+				;;
 			-hpux*)
 				vendor=hp
 				;;
+			-mpeix*)
+				vendor=hp
+				;;
 			-hiux*)
 				vendor=hitachi
 				;;
@@ -907,7 +1309,7 @@ case $basic_machine in
 			-genix*)
 				vendor=ns
 				;;
-			-mvs*)
+			-mvs* | -opened*)
 				vendor=ibm
 				;;
 			-ptx*)
@@ -919,9 +1321,26 @@ case $basic_machine in
 			-aux*)
 				vendor=apple
 				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -*MiNT)
+				vendor=atari
+				;;
 		esac
 		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
 		;;
 esac
 
 echo $basic_machine$os
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/contrib/libpcap/configure b/contrib/libpcap/configure
index 11b289d..dea3a59 100755
--- a/contrib/libpcap/configure
+++ b/contrib/libpcap/configure
@@ -1,5 +1,40 @@
 #! /bin/sh
 
+# From configure.in Revision: 1.87.2.1 
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
 # Guess values for system-dependent variables and create Makefiles.
 # Generated automatically using autoconf version 2.13 
 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
@@ -581,7 +616,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:585: checking host system type" >&5
+echo "configure:620: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -602,7 +637,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:606: checking target system type" >&5
+echo "configure:641: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -620,7 +655,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:624: checking build system type" >&5
+echo "configure:659: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -643,12 +678,6 @@ test "$host_alias" != "$target_alias" &&
   program_prefix=${target_alias}-
 
 
-umask 002
-
-if test -z "$PWD" ; then
-	PWD=`pwd`
-fi
-
 
     
     
@@ -674,7 +703,7 @@ fi
 		    # Extract the first word of "shlicc2", so it can be a program name with args.
 set dummy shlicc2; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:678: checking for $ac_word" >&5
+echo "configure:707: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_SHLICC2'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -715,7 +744,7 @@ fi
     # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:719: checking for $ac_word" >&5
+echo "configure:748: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -745,7 +774,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:749: checking for $ac_word" >&5
+echo "configure:778: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -796,7 +825,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:800: checking for $ac_word" >&5
+echo "configure:829: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -828,7 +857,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:832: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:861: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -839,12 +868,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 843 "configure"
+#line 872 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:848: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:877: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -870,12 +899,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:874: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:903: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:879: checking whether we are using GNU C" >&5
+echo "configure:908: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -884,7 +913,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:888: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:917: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -903,7 +932,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:907: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:936: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -940,7 +969,7 @@ fi
 		    V_CCOPT="-O2"
 	    else
 		    echo $ac_n "checking gcc version""... $ac_c" 1>&6
-echo "configure:944: checking gcc version" >&5
+echo "configure:973: checking gcc version" >&5
 		    if eval "test \"`echo '$''{'ac_cv_lbl_gcc_vers'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -958,19 +987,19 @@ fi
 	    fi
     else
 	    echo $ac_n "checking that $CC handles ansi prototypes""... $ac_c" 1>&6
-echo "configure:962: checking that $CC handles ansi prototypes" >&5
+echo "configure:991: checking that $CC handles ansi prototypes" >&5
 	    if eval "test \"`echo '$''{'ac_cv_lbl_cc_ansi_prototypes'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 967 "configure"
+#line 996 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 int main() {
 int frob(int, char *)
 ; return 0; }
 EOF
-if { (eval echo configure:974: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1003: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_lbl_cc_ansi_prototypes=yes
 else
@@ -988,21 +1017,21 @@ fi
 
 		    hpux*)
 			    echo $ac_n "checking for HP-UX ansi compiler ($CC -Aa -D_HPUX_SOURCE)""... $ac_c" 1>&6
-echo "configure:992: checking for HP-UX ansi compiler ($CC -Aa -D_HPUX_SOURCE)" >&5
+echo "configure:1021: checking for HP-UX ansi compiler ($CC -Aa -D_HPUX_SOURCE)" >&5
 			    savedcflags="$CFLAGS"
 			    CFLAGS="-Aa -D_HPUX_SOURCE $CFLAGS"
 			    if eval "test \"`echo '$''{'ac_cv_lbl_cc_hpux_cc_aa'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 999 "configure"
+#line 1028 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 int main() {
 int frob(int, char *)
 ; return 0; }
 EOF
-if { (eval echo configure:1006: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1035: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_lbl_cc_hpux_cc_aa=yes
 else
@@ -1046,12 +1075,12 @@ EOF
 
 	    ultrix*)
 		    echo $ac_n "checking that Ultrix $CC hacks const in prototypes""... $ac_c" 1>&6
-echo "configure:1050: checking that Ultrix $CC hacks const in prototypes" >&5
+echo "configure:1079: checking that Ultrix $CC hacks const in prototypes" >&5
 		    if eval "test \"`echo '$''{'ac_cv_lbl_cc_const_proto'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1055 "configure"
+#line 1084 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 int main() {
@@ -1059,7 +1088,7 @@ struct a { int b; };
 			    void c(const struct a *)
 ; return 0; }
 EOF
-if { (eval echo configure:1063: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1092: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_lbl_cc_const_proto=yes
 else
@@ -1082,9 +1111,209 @@ EOF
 	    esac
     fi
 
+echo $ac_n "checking for inline""... $ac_c" 1>&6
+echo "configure:1116: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+  cat > conftest.$ac_ext <<EOF
+#line 1123 "configure"
+#include "confdefs.h"
+
+int main() {
+} $ac_kw foo() {
+; return 0; }
+EOF
+if { (eval echo configure:1130: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_c_inline=$ac_kw; break
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+done
+
+fi
+
+echo "$ac_t""$ac_cv_c_inline" 1>&6
+case "$ac_cv_c_inline" in
+  inline | yes) ;;
+  no) cat >> confdefs.h <<\EOF
+#define inline 
+EOF
+ ;;
+  *)  cat >> confdefs.h <<EOF
+#define inline $ac_cv_c_inline
+EOF
+ ;;
+esac
+
+
+echo $ac_n "checking for __attribute__""... $ac_c" 1>&6
+echo "configure:1157: checking for __attribute__" >&5
+if eval "test \"`echo '$''{'ac_cv___attribute__'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  
+cat > conftest.$ac_ext <<EOF
+#line 1163 "configure"
+#include "confdefs.h"
+
+#include <stdlib.h>
+
+int main() {
+
+static void foo(void) __attribute__ ((noreturn));
+
+static void
+foo(void)
+{
+  exit(1);
+}
+
+; return 0; }
+EOF
+if { (eval echo configure:1180: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv___attribute__=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv___attribute__=no
+fi
+rm -f conftest*
+fi
+
+if test "$ac_cv___attribute__" = "yes"; then
+  cat >> confdefs.h <<\EOF
+#define HAVE___ATTRIBUTE__ 1
+EOF
+
+fi
+echo "$ac_t""$ac_cv___attribute__" 1>&6
+
+
+echo $ac_n "checking for u_int8_t using $CC""... $ac_c" 1>&6
+echo "configure:1202: checking for u_int8_t using $CC" >&5
+    if eval "test \"`echo '$''{'ac_cv_lbl_have_u_int8_t'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1207 "configure"
+#include "confdefs.h"
+
+#	include "confdefs.h"
+#	include <sys/types.h>
+#	if STDC_HEADERS
+#	include <stdlib.h>
+#	include <stddef.h>
+#	endif
+int main() {
+u_int8_t i
+; return 0; }
+EOF
+if { (eval echo configure:1220: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_lbl_have_u_int8_t=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_lbl_have_u_int8_t=no
+fi
+rm -f conftest*
+fi
+
+    echo "$ac_t""$ac_cv_lbl_have_u_int8_t" 1>&6
+    if test $ac_cv_lbl_have_u_int8_t = no ; then
+	    cat >> confdefs.h <<\EOF
+#define u_int8_t u_char
+EOF
+
+    fi
+echo $ac_n "checking for u_int16_t using $CC""... $ac_c" 1>&6
+echo "configure:1240: checking for u_int16_t using $CC" >&5
+    if eval "test \"`echo '$''{'ac_cv_lbl_have_u_int16_t'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1245 "configure"
+#include "confdefs.h"
+
+#	include "confdefs.h"
+#	include <sys/types.h>
+#	if STDC_HEADERS
+#	include <stdlib.h>
+#	include <stddef.h>
+#	endif
+int main() {
+u_int16_t i
+; return 0; }
+EOF
+if { (eval echo configure:1258: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_lbl_have_u_int16_t=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_lbl_have_u_int16_t=no
+fi
+rm -f conftest*
+fi
+
+    echo "$ac_t""$ac_cv_lbl_have_u_int16_t" 1>&6
+    if test $ac_cv_lbl_have_u_int16_t = no ; then
+	    cat >> confdefs.h <<\EOF
+#define u_int16_t u_short
+EOF
+
+    fi
+echo $ac_n "checking for u_int32_t using $CC""... $ac_c" 1>&6
+echo "configure:1278: checking for u_int32_t using $CC" >&5
+    if eval "test \"`echo '$''{'ac_cv_lbl_have_u_int32_t'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1283 "configure"
+#include "confdefs.h"
+
+#	include "confdefs.h"
+#	include <sys/types.h>
+#	if STDC_HEADERS
+#	include <stdlib.h>
+#	include <stddef.h>
+#	endif
+int main() {
+u_int32_t i
+; return 0; }
+EOF
+if { (eval echo configure:1296: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_lbl_have_u_int32_t=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_lbl_have_u_int32_t=no
+fi
+rm -f conftest*
+fi
+
+    echo "$ac_t""$ac_cv_lbl_have_u_int32_t" 1>&6
+    if test $ac_cv_lbl_have_u_int32_t = no ; then
+	    cat >> confdefs.h <<\EOF
+#define u_int32_t u_int
+EOF
+
+    fi
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1088: checking how to run the C preprocessor" >&5
+echo "configure:1317: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -1099,13 +1328,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 1103 "configure"
+#line 1332 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1109: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1338: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1116,13 +1345,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 1120 "configure"
+#line 1349 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1126: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1355: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1133,13 +1362,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 1137 "configure"
+#line 1366 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1143: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1372: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1163,21 +1392,21 @@ else
 fi
 echo "$ac_t""$CPP" 1>&6
 
-for ac_hdr in malloc.h sys/ioccom.h sys/sockio.h
+for ac_hdr in sys/ioccom.h sys/sockio.h ifaddrs.h netinet/if_ether.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1171: checking for $ac_hdr" >&5
+echo "configure:1400: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1176 "configure"
+#line 1405 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1181: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1410: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1206,12 +1435,12 @@ done
 
 if test "$GCC" = yes ; then
 	    echo $ac_n "checking for ANSI ioctl definitions""... $ac_c" 1>&6
-echo "configure:1210: checking for ANSI ioctl definitions" >&5
+echo "configure:1439: checking for ANSI ioctl definitions" >&5
 	    if eval "test \"`echo '$''{'ac_cv_lbl_gcc_fixincludes'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1215 "configure"
+#line 1444 "configure"
 #include "confdefs.h"
 /*
 		     * This generates a "duplicate case value" when fixincludes
@@ -1230,7 +1459,7 @@ switch (0) {
 		    }
 ; return 0; }
 EOF
-if { (eval echo configure:1234: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1463: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_lbl_gcc_fixincludes=yes
 else
@@ -1250,15 +1479,15 @@ fi
 	    fi
     fi
 
-for ac_func in ether_hostton strerror
+for ac_func in ether_hostton strerror freeifaddrs strlcpy
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1257: checking for $ac_func" >&5
+echo "configure:1486: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1262 "configure"
+#line 1491 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1281,7 +1510,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:1285: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1514: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -1307,7 +1536,7 @@ done
 
 
 echo $ac_n "checking if --disable-protochain option is specified""... $ac_c" 1>&6
-echo "configure:1311: checking if --disable-protochain option is specified" >&5
+echo "configure:1540: checking if --disable-protochain option is specified" >&5
 # Check whether --enable-protochain or --disable-protochain was given.
 if test "${enable_protochain+set}" = set; then
   enableval="$enable_protochain"
@@ -1328,6 +1557,9 @@ EOF
 fi
 echo "$ac_t""${enable_protochain}" 1>&6
 
+if test -z "$with_pcap" && test "$cross_compiling" = yes; then
+	{ echo "configure: error: pcap type not determined when cross-compiling; use --with-pcap=..." 1>&2; exit 1; }
+fi
 # Check whether --with-pcap or --without-pcap was given.
 if test "${with_pcap+set}" = set; then
   withval="$with_pcap"
@@ -1335,7 +1567,7 @@ if test "${with_pcap+set}" = set; then
 fi
 
 echo $ac_n "checking packet capture type""... $ac_c" 1>&6
-echo "configure:1339: checking packet capture type" >&5
+echo "configure:1571: checking packet capture type" >&5
 if test ! -z "$with_pcap" ; then
 	V_PCAP="$withval"
 elif test -r /dev/bpf0 ; then
@@ -1366,7 +1598,7 @@ fi
 echo "$ac_t""$V_PCAP" 1>&6
 
 echo $ac_n "checking if --enable-ipv6 option is specified""... $ac_c" 1>&6
-echo "configure:1370: checking if --enable-ipv6 option is specified" >&5
+echo "configure:1602: checking if --enable-ipv6 option is specified" >&5
 # Check whether --enable-ipv6 or --disable-ipv6 was given.
 if test "${enable_ipv6+set}" = set; then
   enableval="$enable_ipv6"
@@ -1388,17 +1620,17 @@ dlpi)
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1392: checking for $ac_hdr" >&5
+echo "configure:1624: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1397 "configure"
+#line 1629 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1402: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1634: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1425,7 +1657,7 @@ fi
 done
 
 	echo $ac_n "checking for /dev/dlpi device""... $ac_c" 1>&6
-echo "configure:1429: checking for /dev/dlpi device" >&5
+echo "configure:1661: checking for /dev/dlpi device" >&5
 	if test -c /dev/dlpi ; then
 		echo "$ac_t""yes" 1>&6
 		cat >> confdefs.h <<\EOF
@@ -1436,7 +1668,7 @@ EOF
 		echo "$ac_t""no" 1>&6
 		dir="/dev/dlpi"
 		echo $ac_n "checking for $dir directory""... $ac_c" 1>&6
-echo "configure:1440: checking for $dir directory" >&5
+echo "configure:1672: checking for $dir directory" >&5
 		if test -d $dir ; then
 			echo "$ac_t""yes" 1>&6
 			cat >> confdefs.h <<EOF
@@ -1450,21 +1682,21 @@ EOF
 	;;
 
 linux)
-	for ac_hdr in net/if_arp.h
+	for ac_hdr in netpacket/packet.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1458: checking for $ac_hdr" >&5
+echo "configure:1690: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1463 "configure"
+#line 1695 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1468: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1700: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1491,15 +1723,27 @@ fi
 done
 
 	echo $ac_n "checking Linux kernel version""... $ac_c" 1>&6
-echo "configure:1495: checking Linux kernel version" >&5
-	if eval "test \"`echo '$''{'ac_cv_linux_vers'+set}'`\" = set"; then
+echo "configure:1727: checking Linux kernel version" >&5
+ 	if test "$cross_compiling" = yes; then
+ 		if eval "test \"`echo '$''{'ac_cv_linux_vers'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_cv_linux_vers=unknown
+fi
+
+ 	else
+ 		if eval "test \"`echo '$''{'ac_cv_linux_vers'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_linux_vers=`uname -r 2>&1 | \
-		sed -n -e '$s/.* //' -e '$s/\..*//p'`
+ 			sed -n -e '$s/.* //' -e '$s/\..*//p'`
 fi
 
+ 	fi
 	echo "$ac_t""$ac_cv_linux_vers" 1>&6
+ 	if test $ac_cv_linux_vers = unknown ; then
+ 		{ echo "configure: error: cannot determine linux version when cross-compiling" 1>&2; exit 1; }
+ 	fi
 	if test $ac_cv_linux_vers -lt 2 ; then
 		{ echo "configure: error: version 2 or higher required; see the INSTALL doc for more info" 1>&2; exit 1; }
 	fi
@@ -1532,7 +1776,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1536: checking for $ac_word" >&5
+echo "configure:1780: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_V_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1566,7 +1810,7 @@ test -n "$V_LEX" || V_LEX="lex"
     if test "$V_LEX" = flex ; then
 	    # The -V flag was added in 2.4
 	    echo $ac_n "checking for flex 2.4 or higher""... $ac_c" 1>&6
-echo "configure:1570: checking for flex 2.4 or higher" >&5
+echo "configure:1814: checking for flex 2.4 or higher" >&5
 	    if eval "test \"`echo '$''{'ac_cv_lbl_flex_v24'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1592,7 +1836,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1596: checking for $ac_word" >&5
+echo "configure:1840: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_V_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1635,6 +1879,29 @@ test -n "$V_YACC" || V_YACC="yacc"
 	    V_LEX="$V_LEX -Ppcap_"
 	    V_YACC="$V_YACC -p pcap_"
     fi
+if test "$V_LEX" = lex ; then
+# Some versions of lex can't handle the definitions section of scanner.l .
+# Try lexing it and complain if it can't deal.
+	echo $ac_n "checking for capable lex""... $ac_c" 1>&6
+echo "configure:1887: checking for capable lex" >&5
+if eval "test \"`echo '$''{'tcpdump_cv_capable_lex'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if lex -t scanner.l > /dev/null 2>&1; then
+			tcpdump_cv_capable_lex=yes
+		else
+			tcpdump_cv_capable_lex=insufficient
+		fi
+fi
+
+echo "$ac_t""$tcpdump_cv_capable_lex" 1>&6
+	if test $tcpdump_cv_capable_lex = insufficient ; then
+		{ echo "configure: error: Your operating system's lex is insufficient to compile
+ libpcap.  flex is a lex replacement that has many advantages, including
+ being able to compile libpcap.  For more information, see
+ http://www.gnu.org/software/flex/flex.html ." 1>&2; exit 1; }
+	fi
+fi
 
 case "$target_os" in
 
@@ -1667,19 +1934,19 @@ EOF
 
 sinix*)
 	echo $ac_n "checking if SINIX compiler defines sinix""... $ac_c" 1>&6
-echo "configure:1671: checking if SINIX compiler defines sinix" >&5
+echo "configure:1938: checking if SINIX compiler defines sinix" >&5
 	if eval "test \"`echo '$''{'ac_cv_cc_sinix_defined'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1676 "configure"
+#line 1943 "configure"
 #include "confdefs.h"
 
 int main() {
 int i = sinix;
 ; return 0; }
 EOF
-if { (eval echo configure:1683: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1950: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_cc_sinix_defined=yes
 else
@@ -1706,47 +1973,38 @@ solaris*)
 EOF
 
 	;;
-
-linux*)
-	V_INCLS="$V_INCLS -Ilinux-include"
-	;;
 esac
 
-for ac_prog in ranlib
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1721: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_V_RANLIB'+set}'`\" = set"; then
+echo "configure:1982: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  if test -n "$V_RANLIB"; then
-  ac_cv_prog_V_RANLIB="$V_RANLIB" # Let the user override the test.
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
   for ac_dir in $ac_dummy; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_V_RANLIB="$ac_prog"
+      ac_cv_prog_RANLIB="ranlib"
       break
     fi
   done
   IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
 fi
 fi
-V_RANLIB="$ac_cv_prog_V_RANLIB"
-if test -n "$V_RANLIB"; then
-  echo "$ac_t""$V_RANLIB" 1>&6
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
 else
   echo "$ac_t""no" 1>&6
 fi
 
-test -n "$V_RANLIB" && break
-done
-test -n "$V_RANLIB" || V_RANLIB="@true"
-
 
 rm -f os-proto.h
     if test "${LBL_CFLAGS+set}" = set; then
@@ -1788,12 +2046,12 @@ EOF
     fi
 
 echo $ac_n "checking if sockaddr struct has sa_len member""... $ac_c" 1>&6
-echo "configure:1792: checking if sockaddr struct has sa_len member" >&5
+echo "configure:2050: checking if sockaddr struct has sa_len member" >&5
     if eval "test \"`echo '$''{'ac_cv_lbl_sockaddr_has_sa_len'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1797 "configure"
+#line 2055 "configure"
 #include "confdefs.h"
 
 #	include <sys/types.h>
@@ -1802,7 +2060,7 @@ int main() {
 u_int i = sizeof(((struct sockaddr *)0)->sa_len)
 ; return 0; }
 EOF
-if { (eval echo configure:1806: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2064: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_lbl_sockaddr_has_sa_len=yes
 else
@@ -1822,14 +2080,51 @@ EOF
 
     fi
 
+echo $ac_n "checking if dl_hp_ppa_info_t struct has dl_module_id_1 member""... $ac_c" 1>&6
+echo "configure:2085: checking if dl_hp_ppa_info_t struct has dl_module_id_1 member" >&5
+    if eval "test \"`echo '$''{'ac_cv_lbl_dl_hp_ppa_info_t_has_dl_module_id_1'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2090 "configure"
+#include "confdefs.h"
+
+#	include <sys/types.h>
+#	include <sys/dlpi.h>
+#	include <sys/dlpi_ext.h>
+int main() {
+u_int i = sizeof(((dl_hp_ppa_info_t *)0)->dl_module_id_1)
+; return 0; }
+EOF
+if { (eval echo configure:2100: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_lbl_dl_hp_ppa_info_t_has_dl_module_id_1=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_lbl_dl_hp_ppa_info_t_has_dl_module_id_1=no
+fi
+rm -f conftest*
+fi
+
+    echo "$ac_t""$ac_cv_lbl_dl_hp_ppa_info_t_has_dl_module_id_1" 1>&6
+    if test $ac_cv_lbl_dl_hp_ppa_info_t_has_dl_module_id_1 = yes ; then
+	    cat >> confdefs.h <<\EOF
+#define HAVE_HP_PPA_INFO_T_DL_MODULE_ID_1 1
+EOF
+
+    fi
+
 echo $ac_n "checking if unaligned accesses fail""... $ac_c" 1>&6
-echo "configure:1827: checking if unaligned accesses fail" >&5
+echo "configure:2121: checking if unaligned accesses fail" >&5
     if eval "test \"`echo '$''{'ac_cv_lbl_unaligned_fail'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$target_cpu" in
 
-	alpha|hp*|mips|sparc)
+	# XXX: should also check that they don't do weird things (like on arm)
+	alpha*|arm*|hp*|mips|sparc)
 		ac_cv_lbl_unaligned_fail=yes
 		;;
 
@@ -1885,11 +2180,6 @@ EOF
 
     fi
 
-if test -r ${srcdir}/lbl/gnuc.h ; then
-	rm -f gnuc.h
-	ln -s ${srcdir}/lbl/gnuc.h gnuc.h
-fi
-
 rm -f net
 ln -s ${srcdir}/bpf/net net
 
@@ -1912,7 +2202,7 @@ ln -s ${srcdir}/bpf/net net
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1916: checking for a BSD compatible install" >&5
+echo "configure:2206: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1965,6 +2255,8 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 
+
+
 trap '' 1 2 15
 cat > confcache <<\EOF
 # This file is a shell script that caches the results of configure
@@ -2028,19 +2320,7 @@ fi
 
 trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
 
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
+DEFS=-DHAVE_CONFIG_H
 
 # Without the "./", some shells look in PATH for config.status.
 : ${CONFIG_STATUS=./config.status}
@@ -2078,7 +2358,7 @@ done
 ac_given_srcdir=$srcdir
 ac_given_INSTALL="$INSTALL"
 
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
 EOF
 cat >> $CONFIG_STATUS <<EOF
 
@@ -2130,10 +2410,11 @@ s%@CC@%$CC%g
 s%@CPP@%$CPP%g
 s%@V_LEX@%$V_LEX%g
 s%@V_YACC@%$V_YACC%g
-s%@V_RANLIB@%$V_RANLIB%g
+s%@RANLIB@%$RANLIB%g
 s%@V_CCOPT@%$V_CCOPT%g
 s%@V_INCLS@%$V_INCLS%g
 s%@V_PCAP@%$V_PCAP%g
+s%@V_RANLIB@%$V_RANLIB%g
 s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
 s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
 s%@INSTALL_DATA@%$INSTALL_DATA%g
@@ -2237,6 +2518,113 @@ s%@INSTALL@%$INSTALL%g
 fi; done
 rm -f conftest.s*
 
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
+ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
+ac_dC='\3'
+ac_dD='%g'
+# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
+ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
+ac_uB='\([ 	]\)%\1#\2define\3'
+ac_uC=' '
+ac_uD='\4%g'
+# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
+ac_eB='$%\1#\2define\3'
+ac_eC=' '
+ac_eD='%g'
+
+if test "${CONFIG_HEADERS+set}" != set; then
+EOF
+cat >> $CONFIG_STATUS <<EOF
+  CONFIG_HEADERS="config.h"
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+fi
+for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  echo creating $ac_file
+
+  rm -f conftest.frag conftest.in conftest.out
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  cat $ac_file_inputs > conftest.in
+
+EOF
+
+# Transform confdefs.h into a sed script conftest.vals that substitutes
+# the proper values into config.h.in to produce config.h.  And first:
+# Protect against being on the right side of a sed subst in config.status.
+# Protect against being in an unquoted here document in config.status.
+rm -f conftest.vals
+cat > conftest.hdr <<\EOF
+s/[\\&%]/\\&/g
+s%[\\$`]%\\&%g
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
+s%ac_d%ac_u%gp
+s%ac_u%ac_e%gp
+EOF
+sed -n -f conftest.hdr confdefs.h > conftest.vals
+rm -f conftest.hdr
+
+# This sed command replaces #undef with comments.  This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+cat >> conftest.vals <<\EOF
+s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
+EOF
+
+# Break up conftest.vals because some shells have a limit on
+# the size of here documents, and old seds have small limits too.
+
+rm -f conftest.tail
+while :
+do
+  ac_lines=`grep -c . conftest.vals`
+  # grep -c gives empty output for an empty file on some AIX systems.
+  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
+  # Write a limited-size here document to conftest.frag.
+  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
+  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
+  echo 'CEOF
+  sed -f conftest.frag conftest.in > conftest.out
+  rm -f conftest.in
+  mv conftest.out conftest.in
+' >> $CONFIG_STATUS
+  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
+  rm -f conftest.vals
+  mv conftest.tail conftest.vals
+done
+rm -f conftest.vals
+
+cat >> $CONFIG_STATUS <<\EOF
+  rm -f conftest.frag conftest.h
+  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
+  cat conftest.in >> conftest.h
+  rm -f conftest.in
+  if cmp -s $ac_file conftest.h 2>/dev/null; then
+    echo "$ac_file is unchanged"
+    rm -f conftest.h
+  else
+    # Remove last slash and all that follows it.  Not all systems have dirname.
+      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+      # The file is in a subdirectory.
+      test ! -d "$ac_dir" && mkdir "$ac_dir"
+    fi
+    rm -f $ac_file
+    mv conftest.h $ac_file
+  fi
+fi; done
+
 EOF
 cat >> $CONFIG_STATUS <<EOF
 
diff --git a/contrib/libpcap/configure.in b/contrib/libpcap/configure.in
index 732e85f..c2dfc99 100755
--- a/contrib/libpcap/configure.in
+++ b/contrib/libpcap/configure.in
@@ -1,4 +1,4 @@
-dnl @(#) $Header: /tcpdump/master/libpcap/configure.in,v 1.71 1999/11/01 15:56:40 itojun Exp $ (LBL)
+dnl @(#) $Header: /tcpdump/master/libpcap/configure.in,v 1.87.2.1 2001/01/17 18:21:54 guy Exp $ (LBL)
 dnl
 dnl Copyright (c) 1994, 1995, 1996, 1997
 dnl	The Regents of the University of California.  All rights reserved.
@@ -6,23 +6,30 @@ dnl
 dnl Process this file with autoconf to produce a configure script.
 dnl
 
+AC_REVISION($Revision: 1.87.2.1 $)
 AC_INIT(pcap.c)
 
 AC_CANONICAL_SYSTEM
 
-umask 002
-
-if test -z "$PWD" ; then
-	PWD=`pwd`
-fi
-
 AC_LBL_C_INIT(V_CCOPT, V_INCLS)
+AC_C_INLINE
+AC_C___ATTRIBUTE__
 
-AC_CHECK_HEADERS(malloc.h sys/ioccom.h sys/sockio.h)
+AC_LBL_CHECK_TYPE(u_int8_t, u_char)
+AC_LBL_CHECK_TYPE(u_int16_t, u_short)
+AC_LBL_CHECK_TYPE(u_int32_t, u_int)
+
+dnl
+dnl libpcap doesn't itself use <sys/ioccom.h>; however, the test program
+dnl in "AC_LBL_FIXINCLUDES" in "aclocal.m4" uses it, so we have to
+dnl test for it and set "HAVE_SYS_IOCCOM_H" if we have it, otherwise
+dnl "AC_LBL_FIXINCLUDES" won't work on some platforms such as Solaris.
+dnl
+AC_CHECK_HEADERS(sys/ioccom.h sys/sockio.h ifaddrs.h netinet/if_ether.h)
 
 AC_LBL_FIXINCLUDES
 
-AC_CHECK_FUNCS(ether_hostton strerror)
+AC_CHECK_FUNCS(ether_hostton strerror freeifaddrs strlcpy)
 
 dnl to pacify those who hate protochain insn
 AC_MSG_CHECKING(if --disable-protochain option is specified)
@@ -34,7 +41,7 @@ x)	enable_protochain=enabled	;;
 esac
 
 if test "$enable_protochain" = "disabled"; then
-	AC_DEFINE(NO_PROTOCHAIN)
+	AC_DEFINE(NO_PROTOCHAIN,1,[do not use protochain])
 fi
 AC_MSG_RESULT(${enable_protochain})
 
@@ -44,6 +51,11 @@ dnl better way of testing since the device might be protected. So we
 dnl check in our normal order using -r and then check the for the /dev
 dnl guys again using -c.
 dnl
+dnl XXX This could be done for cross-compiling, but for now it's not.
+dnl
+if test -z "$with_pcap" && test "$cross_compiling" = yes; then
+	AC_MSG_ERROR(pcap type not determined when cross-compiling; use --with-pcap=...)
+fi
 AC_ARG_WITH(pcap, [  --with-pcap=TYPE        use packet capture TYPE])
 AC_MSG_CHECKING(packet capture type)
 if test ! -z "$with_pcap" ; then
@@ -78,7 +90,7 @@ AC_MSG_RESULT($V_PCAP)
 AC_MSG_CHECKING(if --enable-ipv6 option is specified)
 AC_ARG_ENABLE(ipv6, [  --enable-ipv6           build IPv6-capable version])
 if test "$enable_ipv6" = "yes"; then
-	AC_DEFINE(INET6)
+	AC_DEFINE(INET6,1,[IPv6])
 fi
 AC_MSG_RESULT(${enable_ipv6-no})
 
@@ -89,14 +101,14 @@ dlpi)
 	AC_MSG_CHECKING(for /dev/dlpi device)
 	if test -c /dev/dlpi ; then
 		AC_MSG_RESULT(yes)
-		AC_DEFINE(HAVE_DEV_DLPI)
+		AC_DEFINE(HAVE_DEV_DLPI, 1, [define if you have a /dev/dlpi])
 	else
 		AC_MSG_RESULT(no)
 		dir="/dev/dlpi"
 		AC_MSG_CHECKING(for $dir directory)
 		if test -d $dir ; then
 			AC_MSG_RESULT(yes)
-			AC_DEFINE_UNQUOTED(PCAP_DEV_PREFIX, "$dir")
+			AC_DEFINE_UNQUOTED(PCAP_DEV_PREFIX, "$dir", [/dev/dlpi directory])
 		else
 			AC_MSG_RESULT(no)
 		fi
@@ -104,12 +116,20 @@ dlpi)
 	;;
 
 linux)
-	AC_CHECK_HEADERS(net/if_arp.h)
+	AC_CHECK_HEADERS(netpacket/packet.h)
 	AC_MSG_CHECKING(Linux kernel version)
-	AC_CACHE_VAL(ac_cv_linux_vers,
-	    ac_cv_linux_vers=`uname -r 2>&1 | \
-		sed -n -e '$s/.* //' -e '$s/\..*//p'`)
+ 	if test "$cross_compiling" = yes; then
+ 		AC_CACHE_VAL(ac_cv_linux_vers,
+ 		    ac_cv_linux_vers=unknown)
+ 	else
+ 		AC_CACHE_VAL(ac_cv_linux_vers,
+ 		    ac_cv_linux_vers=`uname -r 2>&1 | \
+ 			sed -n -e '$s/.* //' -e '$s/\..*//p'`)
+ 	fi
 	AC_MSG_RESULT($ac_cv_linux_vers)
+ 	if test $ac_cv_linux_vers = unknown ; then
+ 		AC_MSG_ERROR(cannot determine linux version when cross-compiling)
+ 	fi
 	if test $ac_cv_linux_vers -lt 2 ; then
 		AC_MSG_ERROR(version 2 or higher required; see the INSTALL doc for more info)
 	fi
@@ -123,16 +143,32 @@ null)
 esac
 
 AC_LBL_LEX_AND_YACC(V_LEX, V_YACC, pcap_)
+if test "$V_LEX" = lex ; then
+# Some versions of lex can't handle the definitions section of scanner.l .
+# Try lexing it and complain if it can't deal.
+	AC_CACHE_CHECK([for capable lex], tcpdump_cv_capable_lex,
+		if lex -t scanner.l > /dev/null 2>&1; then
+			tcpdump_cv_capable_lex=yes
+		else
+			tcpdump_cv_capable_lex=insufficient
+		fi)
+	if test $tcpdump_cv_capable_lex = insufficient ; then
+		AC_MSG_ERROR([Your operating system's lex is insufficient to compile
+ libpcap.  flex is a lex replacement that has many advantages, including
+ being able to compile libpcap.  For more information, see
+ http://www.gnu.org/software/flex/flex.html .])
+	fi
+fi
 
 case "$target_os" in
 
 aix*)
 	dnl Workaround to enable certain features
-	AC_DEFINE(_SUN)
+	AC_DEFINE(_SUN,1,[define on AIX to get certain functions])
 	;;
 
 hpux9*)
-	AC_DEFINE(HAVE_HPUX9)
+	AC_DEFINE(HAVE_HPUX9,1,[on HP-UX 9.x])
 	;;
 
 hpux10.0*)
@@ -143,7 +179,7 @@ hpux10.1*)
 
 hpux*)
 	dnl HPUX 10.20 and above is similar to HPUX 9...
-	AC_DEFINE(HAVE_HPUX10_20)
+	AC_DEFINE(HAVE_HPUX10_20,1,[on HP-UX 10.20])
 	;;
 
 sinix*)
@@ -156,31 +192,24 @@ sinix*)
 		    ac_cv_cc_sinix_defined=no))
 	    AC_MSG_RESULT($ac_cv_cc_sinix_defined)
 	    if test $ac_cv_cc_sinix_defined = no ; then
-		    AC_DEFINE(sinix)
+		    AC_DEFINE(sinix,1,[on sinix])
 	    fi
 	;;
 
 solaris*)
-	AC_DEFINE(HAVE_SOLARIS)
-	;;
-
-linux*)
-	V_INCLS="$V_INCLS -Ilinux-include"
+	AC_DEFINE(HAVE_SOLARIS,1,[On solaris])
 	;;
 esac
 
-AC_CHECK_PROGS(V_RANLIB, ranlib, @true)
+AC_PROG_RANLIB
 
 AC_LBL_DEVEL(V_CCOPT)
 
 AC_LBL_SOCKADDR_SA_LEN
 
-AC_LBL_UNALIGNED_ACCESS
+AC_LBL_HP_PPA_INFO_T_DL_MODULE_ID_1
 
-if test -r ${srcdir}/lbl/gnuc.h ; then
-	rm -f gnuc.h
-	ln -s ${srcdir}/lbl/gnuc.h gnuc.h
-fi
+AC_LBL_UNALIGNED_ACCESS
 
 rm -f net
 ln -s ${srcdir}/bpf/net net
@@ -194,6 +223,8 @@ AC_SUBST(V_YACC)
 
 AC_PROG_INSTALL
 
+AC_CONFIG_HEADER(config.h)
+
 AC_OUTPUT(Makefile)
 
 if test -f .devel ; then
diff --git a/contrib/libpcap/etherent.c b/contrib/libpcap/etherent.c
index e00325e..fa5f0a9 100644
--- a/contrib/libpcap/etherent.c
+++ b/contrib/libpcap/etherent.c
@@ -21,7 +21,11 @@
 
 #ifndef lint
 static const char rcsid[] =
-    "@(#) $Header: /tcpdump/master/libpcap/etherent.c,v 1.20.1.1 1999/10/07 23:46:40 mcr Exp $ (LBL)";
+    "@(#) $Header: /tcpdump/master/libpcap/etherent.c,v 1.21 2000/07/11 00:37:04 assar Exp $ (LBL)";
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
 #endif
 
 #include <sys/types.h>
@@ -35,7 +39,6 @@ static const char rcsid[] =
 
 #include <pcap-namedb.h>
 
-#include "gnuc.h"
 #ifdef HAVE_OS_PROTO_H
 #include "os-proto.h"
 #endif
diff --git a/contrib/libpcap/ethertype.h b/contrib/libpcap/ethertype.h
index f049ad8..42afe9b 100644
--- a/contrib/libpcap/ethertype.h
+++ b/contrib/libpcap/ethertype.h
@@ -18,11 +18,33 @@
  * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  *
- * @(#) $Header: /tcpdump/master/libpcap/ethertype.h,v 1.7 1999/10/30 04:30:13 itojun Exp $ (LBL)
+ * @(#) $Header: /tcpdump/master/libpcap/ethertype.h,v 1.11 2000/10/22 04:15:55 guy Exp $ (LBL)
  */
 
-/* Types missing from some systems */
+/*
+ * Ethernet types.
+ *
+ * We wrap the declarations with #ifdef, so that if a file includes
+ * <netinet/if_ether.h>, which may declare some of these, we don't
+ * get a bunch of complaints from the C compiler about redefinitions
+ * of these values.
+ *
+ * We declare all of them here so that no file has to include
+ * <netinet/if_ether.h> if all it needs are ETHERTYPE_ values.
+ */
 
+#ifndef ETHERTYPE_PUP
+#define	ETHERTYPE_PUP		0x0200	/* PUP protocol */
+#endif
+#ifndef ETHERTYPE_IP
+#define	ETHERTYPE_IP		0x0800	/* IP protocol */
+#endif
+#ifndef ETHERTYPE_ARP
+#define ETHERTYPE_ARP		0x0806	/* Addr. resolution protocol */
+#endif
+#ifndef ETHERTYPE_REVARP
+#define ETHERTYPE_REVARP	0x8035	/* reverse Addr. resolution protocol */
+#endif
 #ifndef ETHERTYPE_NS
 #define ETHERTYPE_NS		0x0600
 #endif
@@ -72,7 +94,10 @@
 #define ETHERTYPE_AARP		0x80f3
 #endif
 #ifndef ETHERTYPE_IPV6
-#define ETHERTYPE_IPV6		0x80f3
+#define ETHERTYPE_IPV6		0x86dd
+#endif
+#ifndef ETHERTYPE_8021Q
+#define ETHERTYPE_8021Q		0x8100
 #endif
 #ifndef	ETHERTYPE_LOOPBACK
 #define	ETHERTYPE_LOOPBACK	0x9000
diff --git a/contrib/libpcap/inet.c b/contrib/libpcap/inet.c
index feeed42..0b5b696 100644
--- a/contrib/libpcap/inet.c
+++ b/contrib/libpcap/inet.c
@@ -33,7 +33,11 @@
 
 #ifndef lint
 static const char rcsid[] =
-    "@(#) $Header: /tcpdump/master/libpcap/inet.c,v 1.26 2000/01/14 23:55:31 mcr Exp $ (LBL)";
+    "@(#) $Header: /tcpdump/master/libpcap/inet.c,v 1.36 2000/09/20 15:10:29 torsten Exp $ (LBL)";
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
 #endif
 
 #include <sys/param.h>
@@ -45,11 +49,8 @@ static const char rcsid[] =
 #endif
 #include <sys/time.h>				/* concession to AIX */
 
-#if __STDC__
 struct mbuf;
 struct rtentry;
-#endif
-
 #include <net/if.h>
 #include <netinet/in.h>
 
@@ -60,10 +61,12 @@ struct rtentry;
 #include <stdlib.h>
 #include <string.h>
 #include <unistd.h>
+#ifdef HAVE_IFADDRS_H
+#include <ifaddrs.h>
+#endif
 
 #include "pcap-int.h"
 
-#include "gnuc.h"
 #ifdef HAVE_OS_PROTO_H
 #include "os-proto.h"
 #endif
@@ -71,9 +74,12 @@ struct rtentry;
 /* Not all systems have IFF_LOOPBACK */
 #ifdef IFF_LOOPBACK
 #define ISLOOPBACK(p) ((p)->ifr_flags & IFF_LOOPBACK)
+#define ISLOOPBACK_IFA(p) ((p)->ifa_flags & IFF_LOOPBACK)
 #else
 #define ISLOOPBACK(p) ((p)->ifr_name[0] == 'l' && (p)->ifr_name[1] == 'o' && \
     (isdigit((p)->ifr_name[2]) || (p)->ifr_name[2] == '\0'))
+#define ISLOOPBACK_IFA(p) ((p)->ifa_name[0] == 'l' && (p)->ifa_name[1] == 'o' && \
+    (isdigit((p)->ifa_name[2]) || (p)->ifa_name[2] == '\0'))
 #endif
 
 /*
@@ -85,6 +91,59 @@ char *
 pcap_lookupdev(errbuf)
 	register char *errbuf;
 {
+#ifdef HAVE_IFADDRS_H
+	struct ifaddrs *ifap, *ifa, *mp;
+	int n, minunit;
+	char *cp;
+	static char device[IF_NAMESIZE + 1];
+
+	if (getifaddrs(&ifap) != 0) {
+		(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
+		    "getifaddrs: %s", pcap_strerror(errno));
+		return NULL;
+	}
+
+	mp = NULL;
+	minunit = 666;
+	for (ifa = ifap; ifa; ifa = ifa->ifa_next) {
+		const char *endcp;
+
+		if ((ifa->ifa_flags & IFF_UP) == 0 || ISLOOPBACK_IFA(ifa))
+			continue;
+
+		endcp = ifa->ifa_name + strlen(ifa->ifa_name);
+		for (cp = ifa->ifa_name; cp < endcp && !isdigit(*cp); ++cp)
+			continue;
+
+		if (isdigit (*cp)) {
+			n = atoi(cp);
+		} else {
+			n = 0;
+		}
+		if (n < minunit) {
+			minunit = n;
+			mp = ifa;
+		}
+	}
+	if (mp == NULL) {
+		(void)strlcpy(errbuf, "no suitable device found",
+		    PCAP_ERRBUF_SIZE);
+#ifdef HAVE_FREEIFADDRS
+		freeifaddrs(ifap);
+#else
+		free(ifap);
+#endif
+		return (NULL);
+	}
+
+	(void)strlcpy(device, mp->ifa_name, sizeof(device));
+#ifdef HAVE_FREEIFADDRS
+	freeifaddrs(ifap);
+#else
+	free(ifap);
+#endif
+	return (device);
+#else
 	register int fd, minunit, n;
 	register char *cp;
 	register struct ifreq *ifrp, *ifend, *ifnext, *mp;
@@ -96,7 +155,8 @@ pcap_lookupdev(errbuf)
 
 	fd = socket(AF_INET, SOCK_DGRAM, 0);
 	if (fd < 0) {
-		(void)sprintf(errbuf, "socket: %s", pcap_strerror(errno));
+		(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
+		    "socket: %s", pcap_strerror(errno));
 		return (NULL);
 	}
 
@@ -106,17 +166,19 @@ pcap_lookupdev(errbuf)
 		buf = malloc (buf_size);
 		if (buf == NULL) {
 			close (fd);
-			(void)sprintf(errbuf, "out of memory");
+			(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
+			    "out of memory");
 			return (NULL);
 		}
 
 		ifc.ifc_len = buf_size;
 		ifc.ifc_buf = buf;
 		memset (buf, 0, buf_size);
-		if (ioctl(fd, SIOCGIFCONF, (char *)&ifc) < 0) {
+		if (ioctl(fd, SIOCGIFCONF, (char *)&ifc) < 0
+		    && errno != EINVAL) {
 			free (buf);
-			(void)sprintf(errbuf, "SIOCGIFCONF: %s",
-				      pcap_strerror(errno));
+			(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
+			    "SIOCGIFCONF: %s", pcap_strerror(errno));
 			(void)close(fd);
 			return (NULL);
 		}
@@ -132,6 +194,8 @@ pcap_lookupdev(errbuf)
 	mp = NULL;
 	minunit = 666;
 	for (; ifrp < ifend; ifrp = ifnext) {
+		const char *endcp;
+
 #ifdef HAVE_SOCKADDR_SA_LEN
 		n = ifrp->ifr_addr.sa_len + sizeof(ifrp->ifr_name);
 		if (n < sizeof(*ifrp))
@@ -153,7 +217,8 @@ pcap_lookupdev(errbuf)
 		if (ioctl(fd, SIOCGIFFLAGS, (char *)&ifr) < 0) {
 			if (errno == ENXIO)
 				continue;
-			(void)sprintf(errbuf, "SIOCGIFFLAGS: %.*s: %s",
+			(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
+			    "SIOCGIFFLAGS: %.*s: %s",
 			    (int)sizeof(ifr.ifr_name), ifr.ifr_name,
 			    pcap_strerror(errno));
 			(void)close(fd);
@@ -165,9 +230,15 @@ pcap_lookupdev(errbuf)
 		if ((ifr.ifr_flags & IFF_UP) == 0 || ISLOOPBACK(&ifr))
 			continue;
 
-		for (cp = ifrp->ifr_name; !isdigit(*cp); ++cp)
+		endcp = ifrp->ifr_name + strlen(ifrp->ifr_name);
+		for (cp = ifrp->ifr_name; cp < endcp && !isdigit(*cp); ++cp)
 			continue;
-		n = atoi(cp);
+		
+		if (isdigit (*cp)) {
+			n = atoi(cp);
+		} else {
+			n = 0;
+		}
 		if (n < minunit) {
 			minunit = n;
 			mp = ifrp;
@@ -175,15 +246,16 @@ pcap_lookupdev(errbuf)
 	}
 	(void)close(fd);
 	if (mp == NULL) {
-		(void)strcpy(errbuf, "no suitable device found");
+		(void)strlcpy(errbuf, "no suitable device found",
+		    PCAP_ERRBUF_SIZE);
 		free(buf);
 		return (NULL);
 	}
 
-	(void)strncpy(device, mp->ifr_name, sizeof(device) - 1);
-	device[sizeof(device) - 1] = '\0';
+	(void)strlcpy(device, mp->ifr_name, sizeof(device));
 	free(buf);
 	return (device);
+#endif
 }
 
 int
@@ -196,9 +268,20 @@ pcap_lookupnet(device, netp, maskp, errbuf)
 	register struct sockaddr_in *sin;
 	struct ifreq ifr;
 
+	/* 
+	 * The pseudo-device "any" listens on all interfaces and therefore
+	 * has the network address and -mask "0.0.0.0" therefore catching
+	 * all traffic. Using NULL for the interface is the same as "any".
+	 */
+	if (!device || strcmp(device, "any") == 0) {
+		*netp = *maskp = 0;
+		return 0;
+	}
+
 	fd = socket(AF_INET, SOCK_DGRAM, 0);
 	if (fd < 0) {
-		(void)sprintf(errbuf, "socket: %s", pcap_strerror(errno));
+		(void)snprintf(errbuf, PCAP_ERRBUF_SIZE, "socket: %s",
+		    pcap_strerror(errno));
 		return (-1);
 	}
 	memset(&ifr, 0, sizeof(ifr));
@@ -209,10 +292,11 @@ pcap_lookupnet(device, netp, maskp, errbuf)
 	(void)strncpy(ifr.ifr_name, device, sizeof(ifr.ifr_name));
 	if (ioctl(fd, SIOCGIFADDR, (char *)&ifr) < 0) {
 		if (errno == EADDRNOTAVAIL) {
-			(void)sprintf(errbuf, "%s: no IPv4 address assigned",
-			    device);
+			(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
+			    "%s: no IPv4 address assigned", device);
 		} else {
-			(void)sprintf(errbuf, "SIOCGIFADDR: %s: %s",
+			(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
+			    "SIOCGIFADDR: %s: %s",
 			    device, pcap_strerror(errno));
 		}
 		(void)close(fd);
@@ -221,8 +305,8 @@ pcap_lookupnet(device, netp, maskp, errbuf)
 	sin = (struct sockaddr_in *)&ifr.ifr_addr;
 	*netp = sin->sin_addr.s_addr;
 	if (ioctl(fd, SIOCGIFNETMASK, (char *)&ifr) < 0) {
-		(void)sprintf(errbuf, "SIOCGIFNETMASK: %s: %s",
-		    device, pcap_strerror(errno));
+		(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
+		    "SIOCGIFNETMASK: %s: %s", device, pcap_strerror(errno));
 		(void)close(fd);
 		return (-1);
 	}
@@ -236,8 +320,8 @@ pcap_lookupnet(device, netp, maskp, errbuf)
 		else if (IN_CLASSC(*netp))
 			*maskp = IN_CLASSC_NET;
 		else {
-			(void)sprintf(errbuf, "inet class for 0x%x unknown",
-			    *netp);
+			(void)snprintf(errbuf, PCAP_ERRBUF_SIZE,
+			    "inet class for 0x%x unknown", *netp);
 			return (-1);
 		}
 	}
diff --git a/contrib/libpcap/lbl/os-osf4.h b/contrib/libpcap/lbl/os-osf4.h
new file mode 100644
index 0000000..abb207e
--- /dev/null
+++ b/contrib/libpcap/lbl/os-osf4.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 1993, 1994, 1995, 1996, 1997
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that: (1) source code distributions
+ * retain the above copyright notice and this paragraph in its entirety, (2)
+ * distributions including binary code include the above copyright notice and
+ * this paragraph in its entirety in the documentation or other materials
+ * provided with the distribution, and (3) all advertising materials mentioning
+ * features or use of this software display the following acknowledgement:
+ * ``This product includes software developed by the University of California,
+ * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
+ * the University nor the names of its contributors may be used to endorse
+ * or promote products derived from this software without specific prior
+ * written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * @(#) $Header: /tcpdump/master/libpcap/lbl/os-osf4.h,v 1.2 2000/12/22 11:51:33 guy Exp $ (LBL)
+ */
+
+/* Prototypes missing in Digital UNIX 4.x */
+int	snprintf(char *, size_t, const char *, ...);
+int	vsnprintf(char *, size_t, const char *, va_list);
+int	pfopen(char *, int);
+   
diff --git a/contrib/libpcap/lbl/os-solaris2.h b/contrib/libpcap/lbl/os-solaris2.h
index e6d1273..5de2c6e 100644
--- a/contrib/libpcap/lbl/os-solaris2.h
+++ b/contrib/libpcap/lbl/os-solaris2.h
@@ -18,37 +18,9 @@
  * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  *
- * @(#) $Header: /tcpdump/master/libpcap/lbl/os-solaris2.h,v 1.18.1.1 1999/10/07 23:46:41 mcr Exp $ (LBL)
+ * @(#) $Header: /tcpdump/master/libpcap/lbl/os-solaris2.h,v 1.19 2000/10/11 04:02:52 guy Exp $ (LBL)
  */
 
 /* Prototypes missing in SunOS 5 */
-int	daemon(int, int);
-int	dn_expand(const u_char *, const u_char *, const u_char *, char *, int);
-int	dn_skipname(const u_char *, const u_char *);
-int	flock(int, int);
-int	getdtablesize(void);
-int	gethostname(char *, int);
-int	getpagesize(void);
-char	*getusershell(void);
-char	*getwd(char *);
-int	iruserok(u_int, int, char *, char *);
-#ifdef __STDC__
-struct	utmp;
-void	login(struct utmp *);
-#endif
-int	logout(const char *);
-int	res_query(const char *, int, int, u_char *, int);
-int	setenv(const char *, const char *, int);
-#if defined(_STDIO_H) && defined(HAVE_SETLINEBUF)
-int	setlinebuf(FILE *);
-#endif
-int	sigblock(int);
-int	sigsetmask(int);
 char    *strerror(int);
 int	snprintf(char *, size_t, const char *, ...);
-int	strcasecmp(const char *, const char *);
-void	unsetenv(const char *);
-#ifdef __STDC__
-struct	timeval;
-#endif
-int	utimes(const char *, struct timeval *);
diff --git a/contrib/libpcap/llc.h b/contrib/libpcap/llc.h
new file mode 100644
index 0000000..2800315
--- /dev/null
+++ b/contrib/libpcap/llc.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright (c) 1993, 1994, 1997
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that: (1) source code distributions
+ * retain the above copyright notice and this paragraph in its entirety, (2)
+ * distributions including binary code include the above copyright notice and
+ * this paragraph in its entirety in the documentation or other materials
+ * provided with the distribution, and (3) all advertising materials mentioning
+ * features or use of this software display the following acknowledgement:
+ * ``This product includes software developed by the University of California,
+ * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
+ * the University nor the names of its contributors may be used to endorse
+ * or promote products derived from this software without specific prior
+ * written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * @(#) $Header: /tcpdump/master/libpcap/llc.h,v 1.1 2001/01/14 21:26:53 guy Exp $ (LBL)
+ */
+
+/*
+ * 802.2 LLC SAP values.
+ */
+
+#ifndef LLCSAP_NULL
+#define	LLCSAP_NULL		0x00
+#endif
+#ifndef LLCSAP_GLOBAL
+#define	LLCSAP_GLOBAL		0xff
+#endif
+#ifndef LLCSAP_8021B
+#define	LLCSAP_8021B_I		0x02
+#endif
+#ifndef LLCSAP_8021B
+#define	LLCSAP_8021B_G		0x03
+#endif
+#ifndef LLCSAP_IP
+#define	LLCSAP_IP		0x06
+#endif
+#ifndef LLCSAP_PROWAYNM
+#define	LLCSAP_PROWAYNM		0x0e
+#endif
+#ifndef LLCSAP_8021D
+#define	LLCSAP_8021D		0x42
+#endif
+#ifndef LLCSAP_RS511
+#define	LLCSAP_RS511		0x4e
+#endif
+#ifndef LLCSAP_ISO8208
+#define	LLCSAP_ISO8208		0x7e
+#endif
+#ifndef LLCSAP_PROWAY
+#define	LLCSAP_PROWAY		0x8e
+#endif
+#ifndef LLCSAP_SNAP
+#define	LLCSAP_SNAP		0xaa
+#endif
+#ifndef LLCSAP_ISONS
+#define	LLCSAP_ISONS		0xfe
+#endif
+#ifndef LLCSAP_IPX
+#define LLCSAP_IPX		0xe0
+#endif
diff --git a/contrib/libpcap/optimize.c b/contrib/libpcap/optimize.c
index 928cc1c..bb3b6c9 100644
--- a/contrib/libpcap/optimize.c
+++ b/contrib/libpcap/optimize.c
@@ -22,7 +22,11 @@
  */
 #ifndef lint
 static const char rcsid[] =
-    "@(#) $Header: /tcpdump/master/libpcap/optimize.c,v 1.61 1999/10/19 15:18:30 itojun Exp $ (LBL)";
+    "@(#) $Header: /tcpdump/master/libpcap/optimize.c,v 1.67 2000/11/19 13:37:20 itojun Exp $ (LBL)";
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
 #endif
 
 #include <sys/types.h>
@@ -32,11 +36,12 @@ static const char rcsid[] =
 #include <stdlib.h>
 #include <memory.h>
 
+#include <errno.h>
+
 #include "pcap-int.h"
 
 #include "gencode.h"
 
-#include "gnuc.h"
 #ifdef HAVE_OS_PROTO_H
 #include "os-proto.h"
 #endif
@@ -1481,6 +1486,8 @@ opt_blks(root, do_stmts)
 
 	init_val();
 	maxlevel = root->level;
+
+	find_inedges(root);
 	for (i = maxlevel; i >= 0; --i)
 		for (p = levels[i]; p; p = p->link)
 			opt_blk(p, do_stmts);
@@ -1498,6 +1505,8 @@ opt_blks(root, do_stmts)
 			opt_j(&p->ef);
 		}
 	}
+
+	find_inedges(root);
 	for (i = 1; i <= maxlevel; ++i) {
 		for (p = levels[i]; p; p = p->link) {
 			or_pullup(p);
@@ -1577,7 +1586,6 @@ opt_loop(root, do_stmts)
 		find_levels(root);
 		find_dom(root);
 		find_closure(root);
-		find_inedges(root);
 		find_ud(root);
 		find_edom(root);
 		opt_blks(root, do_stmts);
@@ -1777,6 +1785,20 @@ number_blks_r(p)
 /*
  * Return the number of stmts in the flowgraph reachable by 'p'.
  * The nodes should be unmarked before calling.
+ *
+ * Note that "stmts" means "instructions", and that this includes
+ *
+ *	side-effect statements in 'p' (slength(p->stmts));
+ *
+ *	statements in the true branch from 'p' (count_stmts(JT(p)));
+ *
+ *	statements in the false branch from 'p' (count_stmts(JF(p)));
+ *
+ *	the conditional jump itself (1);
+ *
+ *	an extra long jump if the true branch requires it (p->longjt);
+ *
+ *	an extra long jump if the false branch requires it (p->longjf).
  */
 static int
 count_stmts(p)
@@ -1788,7 +1810,7 @@ count_stmts(p)
 		return 0;
 	Mark(p);
 	n = count_stmts(JT(p)) + count_stmts(JF(p));
-	return slength(p->stmts) + n + 1;
+	return slength(p->stmts) + n + 1 + p->longjt + p->longjf;
 }
 
 /*
@@ -1864,7 +1886,7 @@ opt_init(root)
 	 */
 	maxval = 3 * max_stmts;
 	vmap = (struct vmapinfo *)malloc(maxval * sizeof(*vmap));
-	vnode_base = (struct valnode *)malloc(maxval * sizeof(*vmap));
+	vnode_base = (struct valnode *)malloc(maxval * sizeof(*vnode_base));
 }
 
 /*
@@ -1936,7 +1958,7 @@ convert_code_r(p)
 		dst->k = src->s.k;
 
 		/* fill block-local relative jump */
-		if (BPF_CLASS(src->s.code) != BPF_JMP || src->s.code == BPF_JMP|BPF_JA) {
+		if (BPF_CLASS(src->s.code) != BPF_JMP || src->s.code == (BPF_JMP|BPF_JA)) {
 #if 0
 			if (src->s.jt || src->s.jf) {
 				bpf_error("illegal jmp destination");
@@ -2074,6 +2096,36 @@ icode_to_fcode(root, lenp)
 	return fp;
 }
 
+/*
+ * Make a copy of a BPF program and put it in the "fcode" member of
+ * a "pcap_t".
+ *
+ * If we fail to allocate memory for the copy, fill in the "errbuf"
+ * member of the "pcap_t" with an error message, and return -1;
+ * otherwise, return 0.
+ */
+int
+install_bpf_program(pcap_t *p, struct bpf_program *fp)
+{
+	size_t prog_size;
+
+	/*
+	 * Free up any already installed program.
+	 */
+	pcap_freecode(&p->fcode);
+
+	prog_size = sizeof(*fp->bf_insns) * fp->bf_len;
+	p->fcode.bf_len = fp->bf_len;
+	p->fcode.bf_insns = (struct bpf_insn *)malloc(prog_size);
+	if (p->fcode.bf_insns == NULL) {
+		snprintf(p->errbuf, sizeof(p->errbuf),
+			 "malloc: %s", pcap_strerror(errno));
+		return (-1);
+	}
+	memcpy(p->fcode.bf_insns, fp->bf_insns, prog_size);
+	return (0);
+}
+
 #ifdef BDEBUG
 static void
 opt_dump(root)
diff --git a/contrib/libpcap/pcap-bpf.c b/contrib/libpcap/pcap-bpf.c
index 9c9a554..fc56365 100644
--- a/contrib/libpcap/pcap-bpf.c
+++ b/contrib/libpcap/pcap-bpf.c
@@ -20,7 +20,11 @@
  */
 #ifndef lint
 static const char rcsid[] =
-    "@(#) $Header: /tcpdump/master/libpcap/pcap-bpf.c,v 1.32 1999/10/19 15:18:30 itojun Exp $ (LBL)";
+    "@(#) $Header: /tcpdump/master/libpcap/pcap-bpf.c,v 1.44 2000/10/28 00:01:28 guy Exp $ (LBL)";
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
 #endif
 
 #include <sys/param.h>			/* optionally get BSD define */
@@ -42,7 +46,6 @@ static const char rcsid[] =
 
 #include "pcap-int.h"
 
-#include "gnuc.h"
 #ifdef HAVE_OS_PROTO_H
 #include "os-proto.h"
 #endif
@@ -55,7 +58,8 @@ pcap_stats(pcap_t *p, struct pcap_stat *ps)
 	struct bpf_stat s;
 
 	if (ioctl(p->fd, BIOCGSTATS, (caddr_t)&s) < 0) {
-		sprintf(p->errbuf, "BIOCGSTATS: %s", pcap_strerror(errno));
+		snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "BIOCGSTATS: %s",
+		    pcap_strerror(errno));
 		return (-1);
 	}
 
@@ -99,7 +103,8 @@ pcap_read(pcap_t *p, int cnt, pcap_handler callback, u_char *user)
 				/* fall through */
 #endif
 			}
-			sprintf(p->errbuf, "read: %s", pcap_strerror(errno));
+			snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "read: %s",
+			    pcap_strerror(errno));
 			return (-1);
 		}
 		bp = p->buffer;
@@ -136,13 +141,13 @@ bpf_open(pcap_t *p, char *errbuf)
 {
 	int fd;
 	int n = 0;
-	char device[sizeof "/dev/bpf000"];
+	char device[sizeof "/dev/bpf0000000000"];
 
 	/*
 	 * Go through all the minors and find one that isn't in use.
 	 */
 	do {
-		(void)sprintf(device, "/dev/bpf%d", n++);
+		(void)snprintf(device, sizeof(device), "/dev/bpf%d", n++);
 		fd = open(device, O_RDONLY);
 	} while (fd < 0 && errno == EBUSY);
 
@@ -150,7 +155,8 @@ bpf_open(pcap_t *p, char *errbuf)
 	 * XXX better message for all minors used
 	 */
 	if (fd < 0)
-		sprintf(errbuf, "%s: %s", device, pcap_strerror(errno));
+		snprintf(errbuf, PCAP_ERRBUF_SIZE, "(no devices found) %s: %s",
+		    device, pcap_strerror(errno));
 
 	return (fd);
 }
@@ -166,10 +172,11 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 
 	p = (pcap_t *)malloc(sizeof(*p));
 	if (p == NULL) {
-		sprintf(ebuf, "malloc: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "malloc: %s",
+		    pcap_strerror(errno));
 		return (NULL);
 	}
-	bzero(p, sizeof(*p));
+	memset(p, 0, sizeof(*p));
 	fd = bpf_open(p, ebuf);
 	if (fd < 0)
 		goto bad;
@@ -178,35 +185,65 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 	p->snapshot = snaplen;
 
 	if (ioctl(fd, BIOCVERSION, (caddr_t)&bv) < 0) {
-		sprintf(ebuf, "BIOCVERSION: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "BIOCVERSION: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 	if (bv.bv_major != BPF_MAJOR_VERSION ||
 	    bv.bv_minor < BPF_MINOR_VERSION) {
-		sprintf(ebuf, "kernel bpf filter out of date");
+		snprintf(ebuf, PCAP_ERRBUF_SIZE,
+		    "kernel bpf filter out of date");
 		goto bad;
 	}
-	v = 32768;	/* XXX this should be a user-accessible hook */
-	/* Ignore the return value - this is because the call fails on
-	 * BPF systems that don't have kernel malloc.  And if the call
-	 * fails, it's no big deal, we just continue to use the standard
-	 * buffer size.
+
+	/*
+	 * Try finding a good size for the buffer; 32768 may be too
+	 * big, so keep cutting it in half until we find a size
+	 * that works, or run out of sizes to try.
+	 *
+	 * XXX - there should be a user-accessible hook to set the
+	 * initial buffer size.
 	 */
-	(void) ioctl(fd, BIOCSBLEN, (caddr_t)&v);
+	for (v = 32768; v != 0; v >>= 1) {
+		/* Ignore the return value - this is because the call fails
+		 * on BPF systems that don't have kernel malloc.  And if
+		 * the call fails, it's no big deal, we just continue to
+		 * use the standard buffer size.
+		 */
+		(void) ioctl(fd, BIOCSBLEN, (caddr_t)&v);
+
+		(void)strncpy(ifr.ifr_name, device, sizeof(ifr.ifr_name));
+		if (ioctl(fd, BIOCSETIF, (caddr_t)&ifr) >= 0)
+			break;	/* that size worked; we're done */
 
-	(void)strncpy(ifr.ifr_name, device, sizeof(ifr.ifr_name));
-	if (ioctl(fd, BIOCSETIF, (caddr_t)&ifr) < 0) {
-		sprintf(ebuf, "%s: %s", device, pcap_strerror(errno));
+		if (errno != ENOBUFS) {
+			snprintf(ebuf, PCAP_ERRBUF_SIZE, "BIOCSETIF: %s: %s",
+			    device, pcap_strerror(errno));
+			goto bad;
+		}
+	}
+
+	if (v == 0) {
+		snprintf(ebuf, PCAP_ERRBUF_SIZE,
+			 "BIOCSBLEN: %s: No buffer size worked", device);
 		goto bad;
 	}
+
 	/* Get the data link layer type. */
 	if (ioctl(fd, BIOCGDLT, (caddr_t)&v) < 0) {
-		sprintf(ebuf, "BIOCGDLT: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "BIOCGDLT: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 #ifdef __OpenBSD__
 	switch (v) {
 	case DLT_LOOP:
+		/*
+		 * XXX - DLT_LOOP has a network-byte-order, rather than
+		 * a host-byte-order, AF_ value as the link-layer
+		 * header; will the BPF code generator handle that
+		 * correctly on little-endian machines?
+		 */
 		v = DLT_NULL;
 		break;
 	}
@@ -240,23 +277,83 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 		to.tv_sec = to_ms / 1000;
 		to.tv_usec = (to_ms * 1000) % 1000000;
 		if (ioctl(p->fd, BIOCSRTIMEOUT, (caddr_t)&to) < 0) {
-			sprintf(ebuf, "BIOCSRTIMEOUT: %s",
-				pcap_strerror(errno));
+			snprintf(ebuf, PCAP_ERRBUF_SIZE, "BIOCSRTIMEOUT: %s",
+			    pcap_strerror(errno));
 			goto bad;
 		}
 	}
+
+#ifdef _AIX
+#ifdef	BIOCIMMEDIATE
+	/*
+	 * Darren Reed notes that
+	 *
+	 *	On AIX (4.2 at least), if BIOCIMMEDIATE is not set, the
+	 *	timeout appears to be ignored and it waits until the buffer
+	 *	is filled before returning.  The result of not having it
+	 *	set is almost worse than useless if your BPF filter
+	 *	is reducing things to only a few packets (i.e. one every
+	 *	second or so).
+	 *
+	 * so we turn BIOCIMMEDIATE mode on if this is AIX.
+	 *
+	 * We don't turn it on for other platforms, as that means we
+	 * get woken up for every packet, which may not be what we want;
+	 * in the Winter 1993 USENIX paper on BPF, they say:
+	 *
+	 *	Since a process might want to look at every packet on a
+	 *	network and the time between packets can be only a few
+	 *	microseconds, it is not possible to do a read system call
+	 *	per packet and BPF must collect the data from several
+	 *	packets and return it as a unit when the monitoring
+	 *	application does a read.
+	 *
+	 * which I infer is the reason for the timeout - it means we
+	 * wait that amount of time, in the hopes that more packets
+	 * will arrive and we'll get them all with one read.
+	 *
+	 * Setting BIOCIMMEDIATE mode on FreeBSD (and probably other
+	 * BSDs) causes the timeout to be ignored.
+	 *
+	 * On the other hand, some platforms (e.g., Linux) don't support
+	 * timeouts, they just hand stuff to you as soon as it arrives;
+	 * if that doesn't cause a problem on those platforms, it may
+	 * be OK to have BIOCIMMEDIATE mode on BSD as well.
+	 *
+	 * (Note, though, that applications may depend on the read
+	 * completing, even if no packets have arrived, when the timeout
+	 * expires, e.g. GUI applications that have to check for input
+	 * while waiting for packets to arrive; a non-zero timeout
+	 * prevents "select()" from working right on FreeBSD and
+	 * possibly other BSDs, as the timer doesn't start until a
+	 * "read()" is done, so the timer isn't in effect if the
+	 * application is blocked on a "select()", and the "select()"
+	 * doesn't get woken up for a BPF device until the buffer
+	 * fills up.)
+	 */
+	v = 1;
+	if (ioctl(p->fd, BIOCIMMEDIATE, &v) < 0) {
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "BIOCIMMEDIATE: %s",
+		    pcap_strerror(errno));
+		goto bad;
+	}
+#endif	/* BIOCIMMEDIATE */
+#endif	/* _AIX */
+
 	if (promisc)
 		/* set promiscuous mode, okay if it fails */
 		(void)ioctl(p->fd, BIOCPROMISC, NULL);
 
 	if (ioctl(fd, BIOCGBLEN, (caddr_t)&v) < 0) {
-		sprintf(ebuf, "BIOCGBLEN: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "BIOCGBLEN: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 	p->bufsize = v;
 	p->buffer = (u_char *)malloc(p->bufsize);
 	if (p->buffer == NULL) {
-		sprintf(ebuf, "malloc: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "malloc: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 
@@ -275,12 +372,15 @@ pcap_setfilter(pcap_t *p, struct bpf_program *fp)
 	 * compatible with some of kernel BPF code (for example BSD/OS 3.1).
 	 * Take a safer side for now.
 	 */
-	if (no_optimize)
-		p->fcode = *fp;
-	else if (p->sf.rfile != NULL)
-		p->fcode = *fp;
-	else if (ioctl(p->fd, BIOCSETF, (caddr_t)fp) < 0) {
-		sprintf(p->errbuf, "BIOCSETF: %s", pcap_strerror(errno));
+	if (no_optimize) {
+		if (install_bpf_program(p, fp) < 0)
+			return (-1);
+	} else if (p->sf.rfile != NULL) {
+		if (install_bpf_program(p, fp) < 0)
+			return (-1);
+	} else if (ioctl(p->fd, BIOCSETF, (caddr_t)fp) < 0) {
+		snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "BIOCSETF: %s",
+		    pcap_strerror(errno));
 		return (-1);
 	}
 	return (0);
diff --git a/contrib/libpcap/pcap-dlpi.c b/contrib/libpcap/pcap-dlpi.c
index 4692b9c..1a152bc 100644
--- a/contrib/libpcap/pcap-dlpi.c
+++ b/contrib/libpcap/pcap-dlpi.c
@@ -38,7 +38,11 @@
 
 #ifndef lint
 static const char rcsid[] =
-    "@(#) $Header: /tcpdump/master/libpcap/pcap-dlpi.c,v 1.52.1.1 1999/10/07 23:46:40 mcr Exp $ (LBL)";
+    "@(#) $Header: /tcpdump/master/libpcap/pcap-dlpi.c,v 1.63 2000/11/22 05:32:55 guy Exp $ (LBL)";
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
 #endif
 
 #include <sys/types.h>
@@ -80,7 +84,6 @@ static const char rcsid[] =
 
 #include "pcap-int.h"
 
-#include "gnuc.h"
 #ifdef HAVE_OS_PROTO_H
 #include "os-proto.h"
 #endif
@@ -159,7 +162,8 @@ pcap_read(pcap_t *p, int cnt, pcap_handler callback, u_char *user)
 					cc = 0;
 					continue;
 				}
-				strcpy(p->errbuf, pcap_strerror(errno));
+				strlcpy(p->errbuf, pcap_strerror(errno),
+				    sizeof(p->errbuf));
 				return (-1);
 			}
 			cc = data.len;
@@ -241,54 +245,101 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 
 	p = (pcap_t *)malloc(sizeof(*p));
 	if (p == NULL) {
-		strcpy(ebuf, pcap_strerror(errno));
+		strlcpy(ebuf, pcap_strerror(errno), PCAP_ERRBUF_SIZE);
 		return (NULL);
 	}
 	memset(p, 0, sizeof(*p));
 
+#ifdef HAVE_DEV_DLPI
 	/*
-	** Determine device and ppa
+	** Remove any "/dev/" on the front of the device.
 	*/
-	cp = strpbrk(device, "0123456789");
+	cp = strrchr(device, '/');
+	if (cp == NULL)
+		cp = device;
+	else
+		cp++;
+	strlcpy(dname, cp, sizeof(dname));
+
+	/*
+	 * Split the name into a device type and a unit number.
+	 */
+	cp = strpbrk(dname, "0123456789");
 	if (cp == NULL) {
-		sprintf(ebuf, "%s missing unit number", device);
+		snprintf(ebuf, PCAP_ERRBUF_SIZE,
+		    "%s missing unit number", device);
 		goto bad;
 	}
 	ppa = strtol(cp, &eos, 10);
 	if (*eos != '\0') {
-		sprintf(ebuf, "%s bad unit number", device);
+		snprintf(ebuf, PCAP_ERRBUF_SIZE,
+		    "%s bad unit number", device);
 		goto bad;
 	}
+	*cp = '\0';
 
-	if (*device == '/')
-		strcpy(dname, device);
-	else
-		sprintf(dname, "%s/%s", PCAP_DEV_PREFIX, device);
-#ifdef HAVE_DEV_DLPI
-	/* Map network device to /dev/dlpi unit */
+	/*
+	 * Use "/dev/dlpi" as the device.
+	 *
+	 * XXX - HP's DLPI Programmer's Guide for HP-UX 11.00 says that
+	 * the "dl_mjr_num" field is for the "major number of interface
+	 * driver"; that's the major of "/dev/dlpi" on the system on
+	 * which I tried this, but there may be DLPI devices that
+	 * use a different driver, in which case we may need to
+	 * search "/dev" for the appropriate device with that major
+	 * device number, rather than hardwiring "/dev/dlpi".
+	 */
 	cp = "/dev/dlpi";
 	if ((p->fd = open(cp, O_RDWR)) < 0) {
-		sprintf(ebuf, "%s: %s", cp, pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE,
+		    "%s: %s", cp, pcap_strerror(errno));
 		goto bad;
 	}
-	/* Map network interface to /dev/dlpi unit */
+
+	/*
+	 * Get a table of all PPAs for that device, and search that
+	 * table for the specified device type name and unit number.
+	 */
 	ppa = get_dlpi_ppa(p->fd, dname, ppa, ebuf);
 	if (ppa < 0)
 		goto bad;
 #else
+	/*
+	** Determine device and ppa
+	*/
+	cp = strpbrk(device, "0123456789");
+	if (cp == NULL) {
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s missing unit number",
+		    device);
+		goto bad;
+	}
+	ppa = strtol(cp, &eos, 10);
+	if (*eos != '\0') {
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s bad unit number", device);
+		goto bad;
+	}
+
+	if (*device == '/')
+		strlcpy(dname, device, sizeof(dname));
+	else
+		snprintf(dname, sizeof(dname), "%s/%s", PCAP_DEV_PREFIX,
+		    device);
+
 	/* Try device without unit number */
-	strcpy(dname2, dname);
+	strlcpy(dname2, dname, sizeof(dname2));
 	cp = strchr(dname, *cp);
 	*cp = '\0';
 	if ((p->fd = open(dname, O_RDWR)) < 0) {
 		if (errno != ENOENT) {
-			sprintf(ebuf, "%s: %s", dname, pcap_strerror(errno));
+			snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s: %s", dname,
+			    pcap_strerror(errno));
 			goto bad;
 		}
 
 		/* Try again with unit number */
 		if ((p->fd = open(dname2, O_RDWR)) < 0) {
-			sprintf(ebuf, "%s: %s", dname2, pcap_strerror(errno));
+			snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s: %s", dname2,
+			    pcap_strerror(errno));
 			goto bad;
 		}
 		/* XXX Assume unit zero */
@@ -314,7 +365,14 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 	** using SINIX)
 	*/
 #if !defined(HAVE_HPUX9) && !defined(HAVE_HPUX10_20) && !defined(sinix)
+#ifdef _AIX
+        /* According to IBM's AIX Support Line, the dl_sap value
+        ** should not be less than 0x600 (1536) for standard ethernet 
+         */
+	if (dlbindreq(p->fd, 1537, ebuf) < 0 ||
+#else
 	if (dlbindreq(p->fd, 0, ebuf) < 0 ||
+#endif
 	    dlbindack(p->fd, (char *)buf, ebuf) < 0)
 		goto bad;
 #endif
@@ -391,7 +449,8 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 		break;
 
 	default:
-		sprintf(ebuf, "unknown mac type 0x%lu", infop->dl_mac_type);
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "unknown mac type %lu",
+		    infop->dl_mac_type);
 		goto bad;
 	}
 
@@ -400,7 +459,8 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 	** This is a non standard SunOS hack to get the ethernet header.
 	*/
 	if (strioctl(p->fd, DLIOCRAW, 0, NULL) < 0) {
-		sprintf(ebuf, "DLIOCRAW: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "DLIOCRAW: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 #endif
@@ -410,7 +470,8 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 	** Another non standard call to get the data nicely buffered
 	*/
 	if (ioctl(p->fd, I_PUSH, "bufmod") != 0) {
-		sprintf(ebuf, "I_PUSH bufmod: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "I_PUSH bufmod: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 
@@ -437,7 +498,8 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 #endif
 	if (ss > 0 &&
 	    strioctl(p->fd, SBIOCSSNAP, sizeof(ss), (char *)&ss) != 0) {
-		sprintf(ebuf, "SBIOCSSNAP: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "SBIOCSSNAP: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 
@@ -445,12 +507,14 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 	** Set up the bufmod flags
 	*/
 	if (strioctl(p->fd, SBIOCGFLAGS, sizeof(flag), (char *)&flag) < 0) {
-		sprintf(ebuf, "SBIOCGFLAGS: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "SBIOCGFLAGS: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 	flag |= SB_NO_DROPS;
 	if (strioctl(p->fd, SBIOCSFLAGS, sizeof(flag), (char *)&flag) != 0) {
-		sprintf(ebuf, "SBIOCSFLAGS: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "SBIOCSFLAGS: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 	/*
@@ -462,7 +526,8 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 		to.tv_sec = to_ms / 1000;
 		to.tv_usec = (to_ms * 1000) % 1000000;
 		if (strioctl(p->fd, SBIOCSTIME, sizeof(to), (char *)&to) != 0) {
-			sprintf(ebuf, "SBIOCSTIME: %s", pcap_strerror(errno));
+			snprintf(ebuf, PCAP_ERRBUF_SIZE, "SBIOCSTIME: %s",
+			    pcap_strerror(errno));
 			goto bad;
 		}
 	}
@@ -472,7 +537,8 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 	** As the last operation flush the read side.
 	*/
 	if (ioctl(p->fd, I_FLUSH, FLUSHR) != 0) {
-		sprintf(ebuf, "FLUSHR: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "FLUSHR: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 	/* Allocate data buffer */
@@ -489,7 +555,8 @@ int
 pcap_setfilter(pcap_t *p, struct bpf_program *fp)
 {
 
-	p->fcode = *fp;
+	if (install_bpf_program(p, fp) < 0)
+		return (-1);
 	return (0);
 }
 
@@ -505,7 +572,8 @@ send_request(int fd, char *ptr, int len, char *what, char *ebuf)
 
 	flags = 0;
 	if (putmsg(fd, &ctl, (struct strbuf *) NULL, flags) < 0) {
-		sprintf(ebuf, "send_request: putmsg \"%s\": %s",
+		snprintf(ebuf, PCAP_ERRBUF_SIZE,
+		    "send_request: putmsg \"%s\": %s",
 		    what, pcap_strerror(errno));
 		return (-1);
 	}
@@ -525,7 +593,7 @@ recv_ack(int fd, int size, const char *what, char *bufp, char *ebuf)
 
 	flags = 0;
 	if (getmsg(fd, &ctl, (struct strbuf*)NULL, &flags) < 0) {
-		sprintf(ebuf, "recv_ack: %s getmsg: %s",
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "recv_ack: %s getmsg: %s",
 		    what, pcap_strerror(errno));
 		return (-1);
 	}
@@ -547,37 +615,40 @@ recv_ack(int fd, int size, const char *what, char *bufp, char *ebuf)
 		switch (dlp->error_ack.dl_errno) {
 
 		case DL_BADPPA:
-			sprintf(ebuf, "recv_ack: %s bad ppa (device unit)",
-			    what);
+			snprintf(ebuf, PCAP_ERRBUF_SIZE,
+			    "recv_ack: %s bad ppa (device unit)", what);
 			break;
 
 
 		case DL_SYSERR:
-			sprintf(ebuf, "recv_ack: %s: %s",
+			snprintf(ebuf, PCAP_ERRBUF_SIZE, "recv_ack: %s: %s",
 			    what, pcap_strerror(dlp->error_ack.dl_unix_errno));
 			break;
 
 		case DL_UNSUPPORTED:
-			sprintf(ebuf,
+			snprintf(ebuf, PCAP_ERRBUF_SIZE,
 			    "recv_ack: %s: Service not supplied by provider",
 			    what);
 			break;
 
 		default:
-			sprintf(ebuf, "recv_ack: %s error 0x%x",
+			snprintf(ebuf, PCAP_ERRBUF_SIZE,
+			    "recv_ack: %s error 0x%x",
 			    what, (bpf_u_int32)dlp->error_ack.dl_errno);
 			break;
 		}
 		return (-1);
 
 	default:
-		sprintf(ebuf, "recv_ack: %s unexpected primitive ack 0x%x ",
+		snprintf(ebuf, PCAP_ERRBUF_SIZE,
+		    "recv_ack: %s unexpected primitive ack 0x%x ",
 		    what, (bpf_u_int32)dlp->dl_primitive);
 		return (-1);
 	}
 
 	if (ctl.len < size) {
-		sprintf(ebuf, "recv_ack: %s ack too small (%d < %d)",
+		snprintf(ebuf, PCAP_ERRBUF_SIZE,
+		    "recv_ack: %s ack too small (%d < %d)",
 		    what, ctl.len, size);
 		return (-1);
 	}
@@ -709,29 +780,57 @@ get_release(bpf_u_int32 *majorp, bpf_u_int32 *minorp, bpf_u_int32 *microp)
 
 #ifdef DL_HP_PPA_ACK_OBS
 /*
- * Under HP-UX 10, we can ask for the ppa
+ * Under HP-UX 10 and HP-UX 11, we can ask for the ppa
  */
 
 
-/* Determine ppa number that specifies ifname */
+/*
+ * Determine ppa number that specifies ifname.
+ *
+ * If the "dl_hp_ppa_info_t" doesn't have a "dl_module_id_1" member,
+ * the code that's used here is the old code for HP-UX 10.x.
+ *
+ * However, HP-UX 10.20, at least, appears to have such a member
+ * in its "dl_hp_ppa_info_t" structure, so the new code is used.
+ * The new code didn't work on an old 10.20 system on which Rick
+ * Jones of HP tried it, but with later patches installed, it
+ * worked - it appears that the older system had those members but
+ * didn't put anything in them, so, if the search by name fails, we
+ * do the old search.
+ *
+ * Rick suggests that making sure your system is "up on the latest
+ * lancommon/DLPI/driver patches" is probably a good idea; it'd fix
+ * that problem, as well as allowing libpcap to see packets sent
+ * from the system on which the libpcap application is being run.
+ * (On 10.20, in addition to getting the latest patches, you need
+ * to turn the kernel "lanc_outbound_promisc_flag" flag on with ADB;
+ * a posting to "comp.sys.hp.hpux" at
+ *
+ *	http://www.deja.com/[ST_rn=ps]/getdoc.xp?AN=558092266
+ *
+ * says that, to see the machine's outgoing traffic, you'd need to
+ * apply the right patches to your system, and also set that variable
+ * with:
+ 
+echo 'lanc_outbound_promisc_flag/W1' | /usr/bin/adb -w /stand/vmunix /dev/kmem
+
+ * which could be put in, for example, "/sbin/init.d/lan".
+ *
+ * Setting the variable is not necessary on HP-UX 11.x.
+ */
 static int
 get_dlpi_ppa(register int fd, register const char *device, register int unit,
     register char *ebuf)
 {
 	register dl_hp_ppa_ack_t *ap;
-	register dl_hp_ppa_info_t *ip;
+	register dl_hp_ppa_info_t *ipstart, *ip;
 	register int i;
+	char dname[100];
 	register u_long majdev;
-	dl_hp_ppa_req_t	req;
 	struct stat statbuf;
+	dl_hp_ppa_req_t	req;
 	bpf_u_int32 buf[MAXDLBUF];
 
-	if (stat(device, &statbuf) < 0) {
-		sprintf(ebuf, "stat: %s: %s", device, pcap_strerror(errno));
-		return (-1);
-	}
-	majdev = major(statbuf.st_rdev);
-
 	memset((char *)&req, 0, sizeof(req));
 	req.dl_primitive = DL_HP_PPA_REQ;
 
@@ -741,20 +840,81 @@ get_dlpi_ppa(register int fd, register const char *device, register int unit,
 		return (-1);
 
 	ap = (dl_hp_ppa_ack_t *)buf;
-	ip = (dl_hp_ppa_info_t *)((u_char *)ap + ap->dl_offset);
+	ipstart = (dl_hp_ppa_info_t *)((u_char *)ap + ap->dl_offset);
+	ip = ipstart;
 
-        for(i = 0; i < ap->dl_count; i++) {
-                if (ip->dl_mjr_num == majdev && ip->dl_instance_num == unit)
-                        break;
+#ifdef HAVE_HP_PPA_INFO_T_DL_MODULE_ID_1
+	/*
+	 * The "dl_hp_ppa_info_t" structure has a "dl_module_id_1"
+	 * member that should, in theory, contain the part of the
+	 * name for the device that comes before the unit number,
+	 * and should also have a "dl_module_id_2" member that may
+	 * contain an alternate name (e.g., I think Ethernet devices
+	 * have both "lan", for "lanN", and "snap", for "snapN", with
+	 * the former being for Ethernet packets and the latter being
+	 * for 802.3/802.2 packets).
+	 *
+	 * Search for the device that has the specified name and
+	 * instance number.
+	 */
+	for (i = 0; i < ap->dl_count; i++) {
+		if ((strcmp(ip->dl_module_id_1, device) == 0 ||
+		     strcmp(ip->dl_module_id_2, device) == 0) &&
+		    ip->dl_instance_num == unit)
+			break;
 
-                ip = (dl_hp_ppa_info_t *)((u_char *)ip + ip->dl_next_offset);
-        }
+		ip = (dl_hp_ppa_info_t *)((u_char *)ipstart + ip->dl_next_offset);
+	}
+#else
+	/*
+	 * We don't have that member, so the search is impossible; make it
+	 * look as if the search failed.
+	 */
+	i = ap->dl_count;
+#endif
+
+	if (i == ap->dl_count) {
+		/*
+		 * Well, we didn't, or can't, find the device by name.
+		 *
+		 * HP-UX 10.20, whilst it has "dl_module_id_1" and
+		 * "dl_module_id_2" fields in the "dl_hp_ppa_info_t",
+		 * doesn't seem to fill them in unless the system is
+		 * at a reasonably up-to-date patch level.
+		 *
+		 * Older HP-UX 10.x systems might not have those fields
+		 * at all.
+		 *
+		 * Therefore, we'll search for the entry with the major
+		 * device number of a device with the name "/dev/<dev><unit>",
+		 * if such a device exists, as the old code did.
+		 */
+		snprintf(dname, sizeof(dname), "/dev/%s%d", device, unit);
+		if (stat(dname, &statbuf) < 0) {
+			snprintf(ebuf, PCAP_ERRBUF_SIZE, "stat: %s: %s",
+			    dname, pcap_strerror(errno));
+			return (-1);
+		}
+		majdev = major(statbuf.st_rdev);
+
+		ip = ipstart;
+
+		for (i = 0; i < ap->dl_count; i++) {
+			if (ip->dl_mjr_num == majdev &&
+			    ip->dl_instance_num == unit)
+				break;
+
+			ip = (dl_hp_ppa_info_t *)((u_char *)ipstart + ip->dl_next_offset);
+		}
+	}
         if (i == ap->dl_count) {
-                sprintf(ebuf, "can't find PPA for %s", device);
+                snprintf(ebuf, PCAP_ERRBUF_SIZE,
+		    "can't find /dev/dlpi PPA for %s%d", device, unit);
 		return (-1);
         }
         if (ip->dl_hdw_state == HDW_DEAD) {
-                sprintf(ebuf, "%s: hardware state: DOWN\n", device);
+                snprintf(ebuf, PCAP_ERRBUF_SIZE,
+		    "%s%d: hardware state: DOWN\n", device, unit);
 		return (-1);
         }
         return ((int)ip->dl_ppa);
@@ -783,23 +943,26 @@ get_dlpi_ppa(register int fd, register const char *ifname, register int unit,
 	register int kd;
 	void *addr;
 	struct ifnet ifnet;
-	char if_name[sizeof(ifnet.if_name)], tifname[32];
+	char if_name[sizeof(ifnet.if_name) + 1];
 
 	cp = strrchr(ifname, '/');
 	if (cp != NULL)
 		ifname = cp + 1;
 	if (nlist(path_vmunix, &nl) < 0) {
-		sprintf(ebuf, "nlist %s failed", path_vmunix);
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "nlist %s failed",
+		    path_vmunix);
 		return (-1);
 	}
 	if (nl[NL_IFNET].n_value == 0) {
-		sprintf(ebuf, "could't find %s kernel symbol",
+		snprintf(ebuf, PCAP_ERRBUF_SIZE,
+		    "could't find %s kernel symbol",
 		    nl[NL_IFNET].n_name);
 		return (-1);
 	}
 	kd = open("/dev/kmem", O_RDONLY);
 	if (kd < 0) {
-		sprintf(ebuf, "kmem open: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "kmem open: %s",
+		    pcap_strerror(errno));
 		return (-1);
 	}
 	if (dlpi_kread(kd, nl[NL_IFNET].n_value,
@@ -811,17 +974,16 @@ get_dlpi_ppa(register int fd, register const char *ifname, register int unit,
 		if (dlpi_kread(kd, (off_t)addr,
 		    &ifnet, sizeof(ifnet), ebuf) < 0 ||
 		    dlpi_kread(kd, (off_t)ifnet.if_name,
-		    if_name, sizeof(if_name), ebuf) < 0) {
+		    if_name, sizeof(ifnet.if_name), ebuf) < 0) {
 			(void)close(kd);
 			return (-1);
 		}
-		sprintf(tifname, "%.*s%d",
-		    (int)sizeof(if_name), if_name, ifnet.if_unit);
-		if (strcmp(tifname, ifname) == 0)
+		if_name[sizeof(ifnet.if_name)] = '\0';
+		if (strcmp(if_name, ifname) == 0 && ifnet.if_unit == unit)
 			return (ifnet.if_index);
 	}
 
-	sprintf(ebuf, "Can't find %s", ifname);
+	snprintf(ebuf, PCAP_ERRBUF_SIZE, "Can't find %s", ifname);
 	return (-1);
 }
 
@@ -832,15 +994,18 @@ dlpi_kread(register int fd, register off_t addr,
 	register int cc;
 
 	if (lseek(fd, addr, SEEK_SET) < 0) {
-		sprintf(ebuf, "lseek: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "lseek: %s",
+		    pcap_strerror(errno));
 		return (-1);
 	}
 	cc = read(fd, buf, len);
 	if (cc < 0) {
-		sprintf(ebuf, "read: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "read: %s",
+		    pcap_strerror(errno));
 		return (-1);
 	} else if (cc != len) {
-		sprintf(ebuf, "short read (%d != %d)", cc, len);
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "short read (%d != %d)", cc,
+		    len);
 		return (-1);
 	}
 	return (cc);
diff --git a/contrib/libpcap/pcap-enet.c b/contrib/libpcap/pcap-enet.c
index 3f4189b..be1ca76 100644
--- a/contrib/libpcap/pcap-enet.c
+++ b/contrib/libpcap/pcap-enet.c
@@ -6,6 +6,14 @@
  *
  * Rayan Zachariassen, CA*Net
  */
+#ifndef lint
+static const char rcsid[] =
+    "@(#) $Header: /tcpdump/master/libpcap/pcap-enet.c,v 1.5 2000/10/12 03:53:59 guy Exp $";
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
 
 #include <sys/types.h>
 #include <sys/time.h>
diff --git a/contrib/libpcap/pcap-linux.c b/contrib/libpcap/pcap-linux.c
index 17e0a3b..1199f8f 100644
--- a/contrib/libpcap/pcap-linux.c
+++ b/contrib/libpcap/pcap-linux.c
@@ -1,331 +1,1366 @@
 /*
- * Copyright (c) 1996, 1997
- *	The Regents of the University of California.  All rights reserved.
+ *  pcap-linux.c: Packet capture interface to the Linux kernel
  *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that: (1) source code distributions
- * retain the above copyright notice and this paragraph in its entirety, (2)
- * distributions including binary code include the above copyright notice and
- * this paragraph in its entirety in the documentation or other materials
- * provided with the distribution, and (3) all advertising materials mentioning
- * features or use of this software display the following acknowledgement:
- * ``This product includes software developed by the University of California,
- * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
- * the University nor the names of its contributors may be used to endorse
- * or promote products derived from this software without specific prior
- * written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ *  Copyright (c) 2000 Torsten Landschoff <torsten@debian.org>
+ *  		       Sebastian Krahmer  <krahmer@cs.uni-potsdam.de>
+ *  
+ *  License: BSD
+ *  
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *  
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *  3. The names of the authors may not be used to endorse or promote
+ *     products derived from this software without specific prior
+ *     written permission.
+ *  
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ *  IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ *  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  */
 #ifndef lint
 static const char rcsid[] =
-    "@(#) $Header: /tcpdump/master/libpcap/pcap-linux.c,v 1.15.1.1 1999/10/07 23:46:40 mcr Exp $ (LBL)";
+    "@(#) $Header: /tcpdump/master/libpcap/pcap-linux.c,v 1.51.2.3 2001/01/18 03:59:56 guy Exp $ (LBL)";
 #endif
 
-#include <sys/param.h>
-#include <sys/ioctl.h>
-#include <sys/socket.h>
-#include <sys/time.h>
+/*
+ * Known problems with 2.0[.x] kernels:
+ *
+ *   - The loopback device gives every packet twice; on 2.2[.x] kernels,
+ *     if we use PF_PACKET, we can filter out the transmitted version
+ *     of the packet by using data in the "sockaddr_ll" returned by
+ *     "recvfrom()", but, on 2.0[.x] kernels, we have to use
+ *     PF_INET/SOCK_PACKET, which means "recvfrom()" supplies a
+ *     "sockaddr_pkt" which doesn't give us enough information to let
+ *     us do that.
+ *
+ *   - We have to set the interface's IFF_PROMISC flag ourselves, if
+ *     we're to run in promiscuous mode, which means we have to turn
+ *     it off ourselves when we're done; the kernel doesn't keep track
+ *     of how many sockets are listening promiscuously, which means
+ *     it won't get turned off automatically when no sockets are
+ *     listening promiscuously.  We catch "pcap_close()" and, for
+ *     interfaces we put into promiscuous mode, take them out of
+ *     promiscuous mode - which isn't necessarily the right thing to
+ *     do, if another socket also requested promiscuous mode between
+ *     the time when we opened the socket and the time when we close
+ *     the socket.
+ */
 
-#include <net/if.h>
-#ifdef HAVE_NET_IF_ARP_H
-#include <net/if_arp.h>
-#else
-#include <linux/if_arp.h>
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
 #endif
-#include <linux/if_ether.h>
 
-#include <netinet/in.h>
+#include "pcap-int.h"
+#include "sll.h"
 
 #include <errno.h>
-#include <malloc.h>
-#include <stdio.h>
 #include <stdlib.h>
-#include <string.h>
 #include <unistd.h>
+#include <fcntl.h>
+#include <string.h>
+#include <sys/socket.h>
+#include <sys/ioctl.h>
+#include <sys/utsname.h>
+#include <net/if.h>
+#include <netinet/in.h>
+#include <linux/if_ether.h>
+#include <net/if_arp.h>
 
-static struct ifreq saved_ifr;
+#ifdef HAVE_NETPACKET_PACKET_H
+# include <netpacket/packet.h>
 
-#include "pcap-int.h"
+ /*
+  * We assume this means we really do have PF_PACKET sockets.
+  */
+# define HAVE_PF_PACKET_SOCKETS
+#else
+ /*
+  * Oh, joy.  Some Linux distributions have 2.2 or later kernels and
+  * libc5.  On at least one of those systems (Slackware 4.0), it
+  * appears that "/usr/include/sys/socket.h" includes <linux/socket.h>,
+  * which means it picks up all the AF_, PF_, and SO_ definitions
+  * appropriate for the current kernel; however, it also appears that
+  * they did not see fit to provide a "/usr/include/netpacket/packet.h"
+  * file.
+  *
+  * However, you should be able to get the right definitions by including
+  * <linux/if_packet.h>.
+  *
+  * So if this system has PF_PACKET defined but doesn't have the
+  * <netpacket/packet.h> header file, we include <linux/if_packet.h>
+  * instead.
+  */
+# ifdef PF_PACKET
+#  include <linux/if_packet.h>
 
-#include "gnuc.h"
-#ifdef HAVE_OS_PROTO_H
-#include "os-proto.h"
+ /*
+  * However, on at least some Linux distributions (for example, Red Hat
+  * 5.2), there's no <netpacket/packet.h> file, but PF_PACKET is defined
+  * if you include <sys/socket.h>, but <linux/if_packet.h> doesn't define
+  * any of the PF_PACKET stuff such as "struct sockaddr_ll" or any of
+  * the PACKET_xxx stuff.
+  *
+  * So we check whether PACKET_HOST is defined, and assume that we have
+  * PF_PACKET sockets only if it is defined.
+  */
+# ifdef PACKET_HOST
+#  define HAVE_PF_PACKET_SOCKETS
+# endif /* PACKET_HOST */
+# endif /* PF_PACKET */
+#endif /* HAVE_NETPACKET_PACKET_H */
+
+#ifdef SO_ATTACH_FILTER
+#include <linux/types.h>
+#include <linux/filter.h>
 #endif
 
-void linux_restore_ifr(void);
+#ifndef __GLIBC__
+typedef int		socklen_t;
+#endif
 
-int
-pcap_stats(pcap_t *p, struct pcap_stat *ps)
+#ifndef MSG_TRUNC
+#define MSG_TRUNC	0
+#endif
+
+#define MAX_LINKHEADER_SIZE	256
+
+/* 
+ * When capturing on all interfaces we use this as the buffer size. 
+ * Should be bigger then all MTUs that occur in real life.
+ * 64kB should be enough for now.
+ */
+#define BIGGER_THAN_ALL_MTUS	(64*1024)
+
+/*
+ * Prototypes for internal functions
+ */
+static int map_arphrd_to_dlt(int arptype );
+static int live_open_old(pcap_t *, char *, int, int, char *);
+static int live_open_new(pcap_t *, char *, int, int, char *);
+static int pcap_read_packet(pcap_t *, pcap_handler, u_char *);
+
+/*
+ * Wrap some ioctl calls
+ */
+#ifdef HAVE_PF_PACKET_SOCKETS
+static int	iface_get_id(int fd, const char *device, char *ebuf);
+#endif
+static int	iface_get_mtu(int fd, const char *device, char *ebuf);
+static int 	iface_get_arptype(int fd, const char *device, char *ebuf);
+#ifdef HAVE_PF_PACKET_SOCKETS
+static int 	iface_bind(int fd, int ifindex, char *ebuf);
+#endif
+static int 	iface_bind_old(int fd, const char *device, char *ebuf);
+
+#ifdef SO_ATTACH_FILTER
+static int	fix_program(pcap_t *handle, struct sock_fprog *fcode);
+static int	fix_offset(struct bpf_insn *p);
+#endif
+
+/*
+ *  Get a handle for a live capture from the given device. You can 
+ *  pass NULL as device to get all packages (without link level 
+ *  information of course). If you pass 1 as promisc the interface
+ *  will be set to promiscous mode (XXX: I think this usage should 
+ *  be deprecated and functions be added to select that later allow
+ *  modification of that values -- Torsten).
+ *  
+ *  See also pcap(3).
+ */
+pcap_t *
+pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 {
+        /* Allocate a handle for this session. */
+
+	pcap_t	*handle = malloc(sizeof(*handle));
+	if (handle == NULL) {
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "malloc: %s",
+			 pcap_strerror(errno));
+		return NULL;
+	}
+
+	/* Initialize some components of the pcap structure. */
+
+	memset(handle, 0, sizeof(*handle));
+	handle->snapshot	= snaplen;
+	handle->md.timeout	= to_ms;
+
+	/*
+	 * NULL and "any" are special devices which give us the hint to 
+	 * monitor all devices.
+	 */
+	if (!device || strcmp(device, "any") == 0) {
+		device			= NULL;
+		handle->md.device	= strdup("any");
+	} else
+		handle->md.device	= strdup(device);
+
+	if (handle->md.device == NULL) {
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "strdup: %s",
+			 pcap_strerror(errno) );
+		free(handle);
+		return NULL;
+	}
+
+	/* 
+	 * Current Linux kernels use the protocol family PF_PACKET to 
+	 * allow direct access to all packets on the network while 
+	 * older kernels had a special socket type SOCK_PACKET to 
+	 * implement this feature.
+	 * While this old implementation is kind of obsolete we need
+	 * to be compatible with older kernels for a while so we are 
+	 * trying both methods with the newer method preferred.
+	 */
+
+	if (! (live_open_new(handle, device, promisc, to_ms, ebuf) ||
+	       live_open_old(handle, device, promisc, to_ms, ebuf)) )
+	{
+		/* 
+		 * Both methods to open the packet socket failed. Tidy
+		 * up and report our failure (ebuf is expected to be
+		 * set by the functions above). 
+		 */
 
-	*ps = p->md.stat;
-	return (0);
+		free(handle->md.device);
+		free(handle);
+		return NULL;
+	}
+
+	return handle;
 }
 
+/*
+ *  Read at most max_packets from the capture stream and call the callback
+ *  for each of them. Returns the number of packets handled or -1 if an
+ *  error occured. 
+ */
 int
-pcap_read(pcap_t *p, int cnt, pcap_handler callback, u_char *user)
+pcap_read(pcap_t *handle, int max_packets, pcap_handler callback, u_char *user)
 {
-	register int cc;
-	register int bufsize;
-	register int caplen;
-	register u_char *bp;
-	struct sockaddr from;
-	int fromlen;
-
-	bp = p->buffer + p->offset;
-	bufsize = p->bufsize;
-	if (p->md.pad > 0) {
-		memset(bp, 0, p->md.pad);
-		bp += p->md.pad;
-		bufsize -= p->md.pad;
-	}
+	/*
+	 * Currently, on Linux only one packet is delivered per read,
+	 * so we don't loop.
+	 */
+	return pcap_read_packet(handle, callback, user);
+}
+
+/*
+ *  Read a packet from the socket calling the handler provided by 
+ *  the user. Returns the number of packets received or -1 if an
+ *  error occured.
+ */
+static int
+pcap_read_packet(pcap_t *handle, pcap_handler callback, u_char *userdata)
+{
+	int			offset;
+#ifdef HAVE_PF_PACKET_SOCKETS
+	struct sockaddr_ll	from;
+	struct sll_header	*hdrp;
+#else
+	struct sockaddr		from;
+#endif
+	socklen_t		fromlen;
+	int			packet_len, caplen;
+	struct pcap_pkthdr	pcap_header;
+
+#ifdef HAVE_PF_PACKET_SOCKETS
+	/*
+	 * If this is a cooked device, leave extra room for a
+	 * fake packet header.
+	 */
+	if (handle->md.cooked)
+		offset = SLL_HDR_LEN;
+	else
+		offset = 0;
+#else
+	/*
+	 * This system doesn't have PF_PACKET sockets, so it doesn't
+	 * support cooked devices.
+	 */
+	offset = 0;
+#endif
+
+	/* Receive a single packet from the kernel */
 
-again:
 	do {
 		fromlen = sizeof(from);
-		cc = recvfrom(p->fd, bp, bufsize, 0, &from, &fromlen);
-		if (cc < 0) {
-			/* Don't choke when we get ptraced */
-			switch (errno) {
+		packet_len = recvfrom( 
+			handle->fd, handle->buffer + offset + handle->offset,
+			handle->md.readlen - offset, MSG_TRUNC, 
+			(struct sockaddr *) &from, &fromlen);
+	} while (packet_len == -1 && errno == EINTR);
 
-			case EINTR:
-					goto again;
+	/* Check if an error occured */
 
-			case EWOULDBLOCK:
-				return (0);		/* XXX */
-			}
-			sprintf(p->errbuf, "read: %s", pcap_strerror(errno));
-			return (-1);
+	if (packet_len == -1) {
+		if (errno == EAGAIN)
+			return 0;	/* no packet there */
+		else {
+			snprintf(handle->errbuf, sizeof(handle->errbuf),
+				 "recvfrom: %s", pcap_strerror(errno));
+			return -1;
 		}
-	} while (strcmp(p->md.device, from.sa_data));
-
-	/* If we need have leading zero bytes, adjust count */
-	cc += p->md.pad;
-	bp = p->buffer + p->offset;
-
-	/* If we need to step over leading junk, adjust count and pointer */
-	cc -= p->md.skip;
-	bp += p->md.skip;
-
-	/* Captured length can't exceed our read buffer size */
-	caplen = cc;
-	if (caplen > bufsize)
-		caplen = bufsize;
-
-	/* Captured length can't exceed the snapshot length */
-	if (caplen > p->snapshot)
-		caplen = p->snapshot;
-
-	if (p->fcode.bf_insns == NULL ||
-	    bpf_filter(p->fcode.bf_insns, bp, cc, caplen)) {
-		struct pcap_pkthdr h;
-
-		++p->md.stat.ps_recv;
-		/* Get timestamp */
-		if (ioctl(p->fd, SIOCGSTAMP, &h.ts) < 0) {
-			sprintf(p->errbuf, "SIOCGSTAMP: %s",
-			    pcap_strerror(errno));
-			return (-1);
+	}
+
+#ifdef HAVE_PF_PACKET_SOCKETS
+	/*
+	 * If this is from the loopback device, reject outgoing packets;
+	 * we'll see the packet as an incoming packet as well, and
+	 * we don't want to see it twice.
+	 *
+	 * We can only do this if we're using PF_PACKET; the address
+	 * returned for SOCK_PACKET is a "sockaddr_pkt" which lacks
+	 * the relevant packet type information.
+	 */
+	if (!handle->md.sock_packet &&
+	    from.sll_ifindex == handle->md.lo_ifindex &&
+	    from.sll_pkttype == PACKET_OUTGOING)
+		return 0;
+#endif
+
+#ifdef HAVE_PF_PACKET_SOCKETS
+	/*
+	 * If this is a cooked device, fill in the fake packet header.
+	 */
+	if (handle->md.cooked) {
+		/*
+		 * Add the length of the fake header to the length
+		 * of packet data we read.
+		 */
+		packet_len += SLL_HDR_LEN;
+
+		hdrp = (struct sll_header *)handle->buffer;
+
+		/*
+		 * Map the PACKET_ value to a LINUX_SLL_ value; we
+		 * want the same numerical value to be used in
+		 * the link-layer header even if the numerical values
+		 * for the PACKET_ #defines change, so that programs
+		 * that look at the packet type field will always be
+		 * able to handle DLT_LINUX_SLL captures.
+		 */
+		switch (from.sll_pkttype) {
+
+		case PACKET_HOST:
+			hdrp->sll_pkttype = htons(LINUX_SLL_HOST);
+			break;
+
+		case PACKET_BROADCAST:
+			hdrp->sll_pkttype = htons(LINUX_SLL_BROADCAST);
+			break;
+
+		case PACKET_MULTICAST:
+			hdrp->sll_pkttype = htons(LINUX_SLL_MULTICAST);
+			break;
+
+		case PACKET_OTHERHOST:
+			hdrp->sll_pkttype = htons(LINUX_SLL_OTHERHOST);
+			break;
+
+		case PACKET_OUTGOING:
+			hdrp->sll_pkttype = htons(LINUX_SLL_OUTGOING);
+			break;
+
+		default:
+			hdrp->sll_pkttype = -1;
+			break;
+		}
+
+		hdrp->sll_hatype = htons(from.sll_hatype);
+		hdrp->sll_halen = htons(from.sll_halen);
+		memcpy(hdrp->sll_addr, from.sll_addr,
+		    (from.sll_halen > SLL_ADDRLEN) ?
+		      SLL_ADDRLEN :
+		      from.sll_halen);
+		hdrp->sll_protocol = from.sll_protocol;
+	}
+#endif
+
+	/*
+	 * XXX: According to the kernel source we should get the real 
+	 * packet len if calling recvfrom with MSG_TRUNC set. It does 
+	 * not seem to work here :(, but it is supported by this code
+	 * anyway. 
+	 * To be honest the code RELIES on that feature so this is really
+	 * broken with 2.2.x kernels.
+	 * I spend a day to figure out what's going on and I found out
+	 * that the following is happening: 
+	 *
+	 * The packet comes from a random interface and the packet_rcv 
+	 * hook is called with a clone of the packet. That code inserts
+	 * the packet into the receive queue of the packet socket.
+	 * If a filter is attached to that socket that filter is run
+	 * first - and there lies the problem. The default filter always
+	 * cuts the packet at the snaplen:
+	 *
+	 * # tcpdump -d
+	 * (000) ret      #68
+	 *
+	 * So the packet filter cuts down the packet. The recvfrom call 
+	 * says "hey, it's only 68 bytes, it fits into the buffer" with
+	 * the result that we don't get the real packet length. This 
+	 * is valid at least until kernel 2.2.17pre6. 
+	 *
+	 * We currently handle this by making a copy of the filter
+	 * program, fixing all "ret" instructions with non-zero
+	 * operands to have an operand of 65535 so that the filter
+	 * doesn't truncate the packet, and supplying that modified
+	 * filter to the kernel.
+	 */
+
+	caplen = packet_len;
+	if (caplen > handle->snapshot)
+		caplen = handle->snapshot;
+
+	/* Run the packet filter if not using kernel filter */
+	if (!handle->md.use_bpf && handle->fcode.bf_insns) {
+		if (bpf_filter(handle->fcode.bf_insns, handle->buffer, 
+		                packet_len, caplen) == 0)
+		{
+			/* rejected by filter */
+			return 0;
 		}
-		h.len = cc;
-		h.caplen = caplen;
-		(*callback)(user, &h, bp);
-		return (1);
 	}
-	return (0);
+
+	/* Fill in our own header data */
+
+	if (ioctl(handle->fd, SIOCGSTAMP, &pcap_header.ts) == -1) {
+		snprintf(handle->errbuf, sizeof(handle->errbuf),
+			 "ioctl: %s", pcap_strerror(errno));
+		return -1;
+	}
+	pcap_header.caplen	= caplen;
+	pcap_header.len		= packet_len;
+
+	/* Call the user supplied callback function */
+	handle->md.stat.ps_recv++;
+	callback(userdata, &pcap_header, handle->buffer + handle->offset);
+
+	return 1;
 }
 
-pcap_t *
-pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
+/*
+ *  Get the statistics for the given packet capture handle.
+ *  FIXME: Currently does not report the number of dropped packets.
+ */
+int
+pcap_stats(pcap_t *handle, struct pcap_stat *stats)
 {
-	register int fd, broadcast;
-	register pcap_t *p;
-	struct ifreq ifr;
-	struct sockaddr sa;
-
-	p = (pcap_t *)malloc(sizeof(*p));
-	if (p == NULL) {
-		sprintf(ebuf, "malloc: %s", pcap_strerror(errno));
-		return (NULL);
+	*stats = handle->md.stat;
+	return 0;
+}
+
+/*
+ *  Attach the given BPF code to the packet capture device. 
+ */
+int
+pcap_setfilter(pcap_t *handle, struct bpf_program *filter)
+{
+#ifdef SO_ATTACH_FILTER
+	struct sock_fprog	fcode;
+	int			can_filter_in_kernel;
+#endif
+
+	if (!handle)
+		return -1;
+	if (!filter) {
+	        strncpy(handle->errbuf, "setfilter: No filter specified",
+			sizeof(handle->errbuf));
+		return -1;
 	}
-	memset(p, 0, sizeof(*p));
-	fd = -1;
 
-	fd = socket(PF_INET, SOCK_PACKET, htons(ETH_P_ALL));
-	if (fd < 0) {
-		sprintf(ebuf, "socket: %s", pcap_strerror(errno));
-		goto bad;
+	/* Make our private copy of the filter */
+
+	if (install_bpf_program(handle, filter) < 0) {
+		snprintf(handle->errbuf, sizeof(handle->errbuf),
+			 "malloc: %s", pcap_strerror(errno));
+		return -1;
 	}
-	p->fd = fd;
-
-	/* Bind to the interface name */
-	memset(&sa, 0, sizeof(sa));
-	sa.sa_family = AF_INET;
-	(void)strncpy(sa.sa_data, device, sizeof(sa.sa_data));
-	if (bind(p->fd, &sa, sizeof(sa))) {
-		sprintf(ebuf, "bind: %s: %s", device, pcap_strerror(errno));
-		goto bad;
+
+	/* 
+	 * Run user level packet filter by default. Will be overriden if 
+	 * installing a kernel filter succeeds. 
+	 */
+	handle->md.use_bpf = 0;
+
+	/*
+	 * If we're reading from a savefile, don't try to install
+	 * a kernel filter.
+	 */
+	if (handle->sf.rfile != NULL)
+		return 0;
+
+	/* Install kernel level filter if possible */
+
+#ifdef SO_ATTACH_FILTER
+#ifdef USHRT_MAX
+	if (handle->fcode.bf_len > USHRT_MAX) {
+		/*
+		 * fcode.len is an unsigned short for current kernel. 
+		 * I have yet to see BPF-Code with that much
+		 * instructions but still it is possible. So for the
+		 * sake of correctness I added this check.
+		 */
+		fprintf(stderr, "Warning: Filter too complex for kernel\n");
+		fcode.filter = NULL;
+		can_filter_in_kernel = 0;
+	} else
+#endif /* USHRT_MAX */
+	{
+		/*
+		 * Oh joy, the Linux kernel uses struct sock_fprog instead
+		 * of struct bpf_program and of course the length field is
+		 * of different size. Pointed out by Sebastian
+		 *
+		 * Oh, and we also need to fix it up so that all "ret"
+		 * instructions with non-zero operands have 65535 as the
+		 * operand, and so that, if we're in cooked mode, all
+		 * memory-reference instructions use special magic offsets
+		 * in references to the link-layer header and assume that
+		 * the link-layer payload begins at 0; "fix_program()"
+		 * will do that.
+		 */
+		switch (fix_program(handle, &fcode)) {
+
+		case -1:
+		default:
+			/*
+			 * Fatal error; just quit.
+			 * (The "default" case shouldn't happen; we
+			 * return -1 for that reason.)
+			 */
+			return -1;
+
+		case 0:
+			/*
+			 * The program performed checks that we can't make
+			 * work in the kernel.
+			 */
+			can_filter_in_kernel = 0;
+			break;
+
+		case 1:
+			/*
+			 * We have a filter that'll work in the kernel.
+			 */
+			can_filter_in_kernel = 1;
+			break;
+		}
 	}
 
-	memset(&ifr, 0, sizeof(ifr));
-	strncpy(ifr.ifr_name, device, sizeof(ifr.ifr_name));
-	if (ioctl(p->fd, SIOCGIFHWADDR, &ifr) < 0 ) {
-		sprintf(ebuf, "SIOCGIFHWADDR: %s", pcap_strerror(errno));
-		goto bad;
+	if (can_filter_in_kernel) {
+		if (setsockopt(handle->fd, SOL_SOCKET, SO_ATTACH_FILTER, 
+			       &fcode, sizeof(fcode)) == 0)
+		{
+			/* Installation succeded - using kernel filter. */
+			handle->md.use_bpf = 1;
+		}
+		else
+		{
+			/* 
+			 * Print a warning if we weren't able to install
+			 * the filter for a reason other than "this kernel
+			 * isn't configured to support socket filters.
+			 */
+			if (errno != ENOPROTOOPT && errno != EOPNOTSUPP) {
+				fprintf(stderr,
+				    "Warning: Kernel filter failed: %s\n", 
+					pcap_strerror(errno));
+			}
+		}
 	}
-	broadcast = 0;
-	switch (ifr.ifr_hwaddr.sa_family) {
 
+	/*
+	 * Free up the copy of the filter that was made by "fix_program()".
+	 */
+	if (fcode.filter != NULL)
+		free(fcode.filter);
+#endif /* SO_ATTACH_FILTER */
+
+	return 0;
+}
+
+/*
+ *  Linux uses the ARP hardware type to identify the type of an 
+ *  interface. pcap uses the DLT_xxx constants for this. This 
+ *  function maps the ARPHRD_xxx constant to an appropriate
+ *  DLT_xxx constant.
+ *  
+ *  Returns -1 if unable to map the type; we print a message and,
+ *  if we're using PF_PACKET/SOCK_RAW rather than PF_INET/SOCK_PACKET,
+ *  we fall back on using PF_PACKET/SOCK_DGRAM.
+ */
+static int map_arphrd_to_dlt(int arptype)
+{
+	switch (arptype) {
 	case ARPHRD_ETHER:
 	case ARPHRD_METRICOM:
-		p->linktype = DLT_EN10MB;
-		p->offset = 2;
-		++broadcast;
-		break;
-
-	case ARPHRD_EETHER:
-		p->linktype = DLT_EN3MB;
-		++broadcast;
-		break;
-
-	case ARPHRD_AX25:
-		p->linktype = DLT_AX25;
-		++broadcast;
-		break;
-
-	case ARPHRD_PRONET:
-		p->linktype = DLT_PRONET;
-		break;
-
-	case ARPHRD_CHAOS:
-		p->linktype = DLT_CHAOS;
-		break;
-
-	case ARPHRD_IEEE802:
-		p->linktype = DLT_IEEE802;
-		++broadcast;
-		break;
-
-	case ARPHRD_ARCNET:
-		p->linktype = DLT_ARCNET;
-		++broadcast;
-		break;
-
-	case ARPHRD_SLIP:
+	case ARPHRD_LOOPBACK:	return DLT_EN10MB;
+	case ARPHRD_EETHER:	return DLT_EN3MB;
+	case ARPHRD_AX25:	return DLT_AX25;
+	case ARPHRD_PRONET:	return DLT_PRONET;
+	case ARPHRD_CHAOS:	return DLT_CHAOS;
+#ifndef ARPHRD_IEEE802_TR
+#define ARPHRD_IEEE802_TR 800	/* From Linux 2.4 */
+#endif
+	case ARPHRD_IEEE802_TR:
+	case ARPHRD_IEEE802:	return DLT_IEEE802;
+	case ARPHRD_ARCNET:	return DLT_ARCNET;
+	case ARPHRD_FDDI:	return DLT_FDDI;
+
+#ifndef ARPHRD_ATM  /* FIXME: How to #include this? */
+#define ARPHRD_ATM 19
+#endif
+	case ARPHRD_ATM:	return DLT_ATM_CLIP;
+
+	case ARPHRD_PPP:
+	/* Not sure if this is correct for all tunnels, but it
+	 * works for CIPE */
+	case ARPHRD_TUNNEL:
+#ifndef ARPHRD_SIT
+#define ARPHRD_SIT 776	/* From Linux 2.2.14 */
+#endif
+	case ARPHRD_SIT:
 	case ARPHRD_CSLIP:
 	case ARPHRD_SLIP6:
 	case ARPHRD_CSLIP6:
-	case ARPHRD_PPP:
-		p->linktype = DLT_RAW;
-		break;
-
-	case ARPHRD_LOOPBACK:
-		p->linktype = DLT_NULL;
-		p->md.pad = 2;
-		p->md.skip = 12;
-		break;
-
-#ifdef ARPHRD_FDDI
-	/* Not all versions of the kernel has this define */
-	case ARPHRD_FDDI:
-		p->linktype = DLT_FDDI;
-		++broadcast;
-		break;
+	case ARPHRD_SLIP:	return DLT_RAW;
+	}
+
+	return -1;
+}
+
+/* ===== Functions to interface to the newer kernels ================== */
+
+/*
+ *  Try to open a packet socket using the new kernel interface.
+ *  Returns 0 on failure.
+ *  FIXME: 0 uses to mean success (Sebastian)
+ */
+static int
+live_open_new(pcap_t *handle, char *device, int promisc, 
+	      int to_ms, char *ebuf)
+{
+#ifdef HAVE_PF_PACKET_SOCKETS
+	int			sock_fd = -1, device_id, mtu, arptype;
+	struct packet_mreq	mr;
+
+	/* One shot loop used for error handling - bail out with break */
+
+	do {
+		/*
+		 * Open a socket with protocol family packet. If a device is
+		 * given we try to open it in raw mode otherwise we use 
+		 * the cooked interface. 
+		 */
+		sock_fd = device ? 
+			socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL))
+		      : socket(PF_PACKET, SOCK_DGRAM, htons(ETH_P_ALL));
+
+		if (sock_fd == -1) {
+			snprintf(ebuf, PCAP_ERRBUF_SIZE, "socket: %s",
+				 pcap_strerror(errno) );
+			break;
+		}
+
+		/* It seems the kernel supports the new interface. */
+		handle->md.sock_packet = 0;
+
+		/*
+		 * Get the interface index of the loopback device.
+		 * If the attempt fails, don't fail, just set the
+		 * "md.lo_ifindex" to -1.
+		 *
+		 * XXX - can there be more than one device that loops
+		 * packets back, i.e. devices other than "lo"?  If so,
+		 * we'd need to find them all, and have an array of
+		 * indices for them, and check all of them in
+		 * "pcap_read_packet()".
+		 */
+		handle->md.lo_ifindex = iface_get_id(sock_fd, "lo", ebuf);
+
+		/*
+		 * What kind of frames do we have to deal with? Fall back 
+		 * to cooked mode if we have an unknown interface type. 
+		 */
+
+		if (device) {
+			/* Assume for now we don't need cooked mode. */
+			handle->md.cooked = 0;
+
+			arptype	= iface_get_arptype(sock_fd, device, ebuf);
+			if (arptype == -1) 
+				break;
+			handle->linktype = map_arphrd_to_dlt(arptype);
+			if (handle->linktype == -1 ||
+			    (handle->linktype == DLT_EN10MB &&
+			     (strncmp("isdn", device, 4) == 0 ||
+			      strncmp("isdY", device, 4) == 0)) ||
+			    (handle->linktype == DLT_RAW &&
+			     (strncmp("ippp", device, 4) == 0))) {
+				/*
+				 * Unknown interface type (-1), or an ISDN
+				 * device (whose link-layer type we
+				 * can only determine by using APIs
+				 * that may be different on different
+				 * kernels) - reopen in cooked mode.
+				 *
+				 * XXX - do that with DLT_RAW as well?
+				 */
+				if (close(sock_fd) == -1) {
+					snprintf(ebuf, PCAP_ERRBUF_SIZE,
+						 "close: %s", pcap_strerror(errno));
+					break;
+				}
+				sock_fd = socket(PF_PACKET, SOCK_DGRAM, 
+						 htons(ETH_P_ALL));
+				if (sock_fd == -1) {
+					snprintf(ebuf, PCAP_ERRBUF_SIZE,
+						 "socket: %s", pcap_strerror(errno));
+					break;
+				}
+				handle->md.cooked = 1;
+
+				if (handle->linktype == -1) {
+					/*
+					 * Warn that we're falling back on
+					 * cooked mode; we may want to
+					 * update "map_arphrd_to_dlt()"
+					 * to handle the new type.
+					 */
+					fprintf(stderr, 
+						"Warning: arptype %d not "
+						"supported by libpcap - "
+						"falling back to cooked "
+						"socket\n",
+						arptype);
+				}
+				handle->linktype = DLT_LINUX_SLL;
+			}
+
+			device_id = iface_get_id(sock_fd, device, ebuf);
+			if (device_id == -1)
+				break;
+
+			if (iface_bind(sock_fd, device_id, ebuf) == -1)
+				break;
+		} else {
+			/*
+			 * This is cooked mode.
+			 */
+			handle->md.cooked = 1;
+			handle->linktype = DLT_LINUX_SLL;
+
+			/*
+			 * XXX - squelch GCC complaints about
+			 * uninitialized variables; if we can't
+			 * select promiscuous mode on all interfaces,
+			 * we should move the code below into the
+			 * "if (device)" branch of the "if" and
+			 * get rid of the next statement.
+			 */
+			device_id = -1;
+		}
+
+		/* Select promiscuous mode on/off */
+
+#ifdef SOL_PACKET
+		/* 
+		 * Hmm, how can we set promiscuous mode on all interfaces?
+		 * I am not sure if that is possible at all.
+		 */
+
+		if (device) {
+			memset(&mr, 0, sizeof(mr));
+			mr.mr_ifindex = device_id;
+			mr.mr_type    = promisc ? 
+				PACKET_MR_PROMISC : PACKET_MR_ALLMULTI;
+			if (setsockopt(sock_fd, SOL_PACKET, 
+				PACKET_ADD_MEMBERSHIP, &mr, sizeof(mr)) == -1)
+			{
+				snprintf(ebuf, PCAP_ERRBUF_SIZE, 
+					"setsockopt: %s", pcap_strerror(errno));
+				break;
+			}
+		}
 #endif
 
-#ifdef notdef
-	case ARPHRD_LOCALTLK:
-	case ARPHRD_NETROM:
-	case ARPHRD_APPLETLK:
-	case ARPHRD_DLCI:
-	case ARPHRD_RSRVD:
-	case ARPHRD_ADAPT:
-	case ARPHRD_TUNNEL:
-	case ARPHRD_TUNNEL6:
-	case ARPHRD_FRAD:
-	case ARPHRD_SKIP:
-		/* XXX currently do not know what to do with these... */
-		abort();
+		/* Compute the buffersize */
+
+		mtu	= iface_get_mtu(sock_fd, device, ebuf);
+		if (mtu == -1)
+			break;
+		handle->bufsize	 = MAX_LINKHEADER_SIZE + mtu;
+
+		/* Fill in the pcap structure */
+
+		handle->fd 	 = sock_fd;
+		handle->offset	 = 0;
+
+		handle->buffer	 = malloc(handle->bufsize);
+		if (!handle->buffer) {
+			snprintf(ebuf, PCAP_ERRBUF_SIZE,
+				 "malloc: %s", pcap_strerror(errno));
+			break;
+		}
+
+		/*
+		 * This is a 2.2 or later kernel, as it has PF_PACKET;
+		 * "recvfrom()", when passed the MSG_TRUNC flag, will
+		 * return the actual length of the packet, not the
+		 * number of bytes from the packet copied to userland,
+		 * so we can safely pass it a byte count based on the
+		 * snapshot length.
+		 */
+		handle->md.readlen = handle->snapshot;
+		return 1;
+
+	} while(0);
+
+	if (sock_fd != -1)
+		close(sock_fd);
+	return 0;
+#else
+	strncpy(ebuf, 
+		"New packet capturing interface not supported by build " 
+		"environment", PCAP_ERRBUF_SIZE);
+	return 0;
 #endif
+}
 
-	default:
-		sprintf(ebuf, "unknown physical layer type 0x%x",
-		    ifr.ifr_hwaddr.sa_family);
-		goto bad;
-	}
+#ifdef HAVE_PF_PACKET_SOCKETS
+/*
+ *  Return the index of the given device name. Fill ebuf and return 
+ *  -1 on failure.
+ */
+static int
+iface_get_id(int fd, const char *device, char *ebuf)
+{
+	struct ifreq	ifr;
 
-	/* Base the buffer size on the interface MTU */
 	memset(&ifr, 0, sizeof(ifr));
 	strncpy(ifr.ifr_name, device, sizeof(ifr.ifr_name));
-	if (ioctl(p->fd, SIOCGIFMTU, &ifr) < 0 ) {
-		sprintf(ebuf, "SIOCGIFMTU: %s", pcap_strerror(errno));
-		goto bad;
+
+	if (ioctl(fd, SIOCGIFINDEX, &ifr) == -1) {
+		snprintf(ebuf, PCAP_ERRBUF_SIZE,
+			 "ioctl: %s", pcap_strerror(errno));
+		return -1;
 	}
 
-	/* Leave room for link header (which is never large under linux...) */
-	p->bufsize = ifr.ifr_mtu + 64;
+	return ifr.ifr_ifindex;
+}
 
-	p->buffer = (u_char *)malloc(p->bufsize + p->offset);
-	if (p->buffer == NULL) {
-		sprintf(ebuf, "malloc: %s", pcap_strerror(errno));
-		goto bad;
+/*
+ *  Bind the socket associated with FD to the given device. 
+ */
+static int
+iface_bind(int fd, int ifindex, char *ebuf)
+{
+	struct sockaddr_ll	sll;
+
+	memset(&sll, 0, sizeof(sll));
+	sll.sll_family		= AF_PACKET;
+	sll.sll_ifindex		= ifindex;
+	sll.sll_protocol	= htons(ETH_P_ALL);
+
+	if (bind(fd, (struct sockaddr *) &sll, sizeof(sll)) == -1) {
+		snprintf(ebuf, PCAP_ERRBUF_SIZE,
+			 "bind: %s", pcap_strerror(errno));
+		return -1;
 	}
 
-	/* XXX */
-	if (promisc && broadcast) {
+	return 0;
+}
+
+#endif
+
+
+/* ===== Functions to interface to the older kernels ================== */
+
+/*
+ * With older kernels promiscuous mode is kind of interesting because we
+ * have to reset the interface before exiting. The problem can't really
+ * be solved without some daemon taking care of managing usage counts. 
+ * If we put the interface into promiscuous mode, we set a flag indicating
+ * that we must take it out of that mode when the interface is closed,
+ * and, when closing the interface, if that flag is set we take it out
+ * of promiscuous mode.
+ */
+
+/*
+ * List of pcaps for which we turned promiscuous mode on by hand.
+ * If there are any such pcaps, we arrange to call "pcap_close_all()"
+ * when we exit, and have it close all of them to turn promiscuous mode
+ * off.
+ */
+static struct pcap *pcaps_to_close;
+
+/*
+ * TRUE if we've already called "atexit()" to cause "pcap_close_all()" to
+ * be called on exit.
+ */
+static int did_atexit;
+
+static void	pcap_close_all(void)
+{
+	struct pcap *handle;
+
+	while ((handle = pcaps_to_close) != NULL)
+		pcap_close(handle);
+}
+
+void	pcap_close_linux( pcap_t *handle )
+{
+	struct pcap	*p, *prevp;
+	struct ifreq	ifr;
+
+	if (handle->md.clear_promisc) {
+		/*
+		 * We put the interface into promiscuous mode; take
+		 * it out of promiscuous mode.
+		 *
+		 * XXX - if somebody else wants it in promiscuous mode,
+		 * this code cannot know that, so it'll take it out
+		 * of promiscuous mode.  That's not fixable in 2.0[.x]
+		 * kernels.
+		 */
 		memset(&ifr, 0, sizeof(ifr));
-		strcpy(ifr.ifr_name, device);
-		if (ioctl(p->fd, SIOCGIFFLAGS, &ifr) < 0 ) {
-			sprintf(ebuf, "SIOCGIFFLAGS: %s", pcap_strerror(errno));
-			goto bad;
+		strncpy(ifr.ifr_name, handle->md.device, sizeof(ifr.ifr_name));
+		if (ioctl(handle->fd, SIOCGIFFLAGS, &ifr) == -1) {
+			fprintf(stderr, 
+			    "Can't restore interface flags (SIOCGIFFLAGS failed: %s).\n"
+			    "Please adjust manually.\n"
+			    "Hint: This can't happen with Linux >= 2.2.0.\n",
+			    strerror(errno));
+		} else {
+			if (ifr.ifr_flags & IFF_PROMISC) {
+				/*
+				 * Promiscuous mode is currently on; turn it
+				 * off.
+				 */
+				ifr.ifr_flags &= ~IFF_PROMISC;
+				if (ioctl(handle->fd, SIOCSIFFLAGS, &ifr) == -1) {
+					fprintf(stderr, 
+					    "Can't restore interface flags (SIOCSIFFLAGS failed: %s).\n"
+					    "Please adjust manually.\n"
+					    "Hint: This can't happen with Linux >= 2.2.0.\n",
+					    strerror(errno));
+				}
+			}
+		}
+
+		/*
+		 * Take this pcap out of the list of pcaps for which we
+		 * have to take the interface out of promiscuous mode.
+		 */
+		for (p = pcaps_to_close, prevp = NULL; p != NULL;
+		    prevp = p, p = p->md.next) {
+			if (p == handle) {
+				/*
+				 * Found it.  Remove it from the list.
+				 */
+				if (prevp == NULL) {
+					/*
+					 * It was at the head of the list.
+					 */
+					pcaps_to_close = p->md.next;
+				} else {
+					/*
+					 * It was in the middle of the list.
+					 */
+					prevp->md.next = p->md.next;
+				}
+				break;
+			}
+		}
+	}
+	if (handle->md.device != NULL)
+		free(handle->md.device);
+}
+
+/*
+ *  Try to open a packet socket using the old kernel interface.
+ *  Returns 0 on failure.
+ *  FIXME: 0 uses to mean success (Sebastian)
+ */
+static int
+live_open_old(pcap_t *handle, char *device, int promisc, 
+	      int to_ms, char *ebuf)
+{
+	int		sock_fd = -1, mtu, arptype;
+	struct utsname	utsname;
+	struct ifreq	ifr;
+
+	do {
+		/* Open the socket */
+
+		sock_fd = socket(PF_INET, SOCK_PACKET, htons(ETH_P_ALL));
+		if (sock_fd == -1) {
+			snprintf(ebuf, PCAP_ERRBUF_SIZE,
+				 "socket: %s", pcap_strerror(errno));
+			break;
+		}
+
+		/* It worked - we are using the old interface */
+		handle->md.sock_packet = 1;
+
+		/* ...which means we get the link-layer header. */
+		handle->md.cooked = 0;
+
+		/* Bind to the given device */
+
+		if (!device) {
+		        strncpy(ebuf, "pcap_open_live: The \"any\" device isn't supported on 2.0[.x]-kernel systems",
+				PCAP_ERRBUF_SIZE);
+			break;
+		}
+		if (iface_bind_old(sock_fd, device, ebuf) == -1)
+			break;
+
+		/* Go to promisc mode */
+		if (promisc) {
+			memset(&ifr, 0, sizeof(ifr));
+			strncpy(ifr.ifr_name, device, sizeof(ifr.ifr_name));
+			if (ioctl(sock_fd, SIOCGIFFLAGS, &ifr) == -1) {
+				snprintf(ebuf, PCAP_ERRBUF_SIZE,
+					 "ioctl: %s", pcap_strerror(errno));
+				break;
+			}
+			if ((ifr.ifr_flags & IFF_PROMISC) == 0) {
+				/*
+				 * Promiscuous mode isn't currently on,
+				 * so turn it on, and remember that
+				 * we should turn it off when the
+				 * pcap_t is closed.
+				 */
+
+				/*
+				 * If we haven't already done so, arrange
+				 * to have "pcap_close_all()" called when
+				 * we exit.
+				 */
+				if (!did_atexit) {
+					if (atexit(pcap_close_all) == -1) {
+						/*
+						 * "atexit()" failed; don't
+						 * put the interface in
+						 * promiscuous mode, just
+						 * give up.
+						 */
+						strncpy(ebuf, "atexit failed",
+							PCAP_ERRBUF_SIZE);
+						break;
+					}
+				}
+
+				ifr.ifr_flags |= IFF_PROMISC;
+				if (ioctl(sock_fd, SIOCSIFFLAGS, &ifr) == -1) {
+				        snprintf(ebuf, PCAP_ERRBUF_SIZE,
+						 "ioctl: %s",
+						 pcap_strerror(errno));
+					break;
+				}
+				handle->md.clear_promisc = 1;
+
+				/*
+				 * Add this to the list of pcaps
+				 * to close when we exit.
+				 */
+				handle->md.next = pcaps_to_close;
+				pcaps_to_close = handle;
+			}
+		}
+
+		/* Compute the buffersize */
+
+		mtu	= iface_get_mtu(sock_fd, device, ebuf);
+		if (mtu == -1)
+			break;
+		handle->bufsize	 = MAX_LINKHEADER_SIZE + mtu;
+		if (handle->bufsize < handle->snapshot)
+			handle->bufsize = handle->snapshot;
+
+		/* All done - fill in the pcap handle */
+
+		arptype = iface_get_arptype(sock_fd, device, ebuf);
+		if (arptype == -1)
+			break;
+
+		handle->fd 	 = sock_fd;
+		handle->offset	 = 0;
+		handle->linktype = map_arphrd_to_dlt(arptype);
+		/*
+		 * XXX - handle ISDN types here?  We can't fall back on
+		 * cooked sockets, so we'd have to figure out from the
+		 * device name what type of link-layer encapsulation
+		 * it's using, and map that to an appropriate DLT_
+		 * value, meaning we'd map "isdnN" devices to DLT_RAW
+		 * (they supply raw IP packets with no link-layer
+		 * header) and "isdY" devices to a new DLT_I4L_IP
+		 * type that has only an Ethernet packet type as
+		 * a link-layer header.
+		 */
+		if (handle->linktype == -1) {
+			snprintf(ebuf, PCAP_ERRBUF_SIZE,
+				 "interface type of %s not supported", device);
+			break;
+		}
+		handle->buffer	 = malloc(handle->bufsize);
+		if (!handle->buffer) {
+		        snprintf(ebuf, PCAP_ERRBUF_SIZE,
+				 "malloc: %s", pcap_strerror(errno));
+			break;
 		}
-		saved_ifr = ifr;
-		ifr.ifr_flags |= IFF_PROMISC;
-		if (ioctl(p->fd, SIOCSIFFLAGS, &ifr) < 0 ) {
-			sprintf(ebuf, "SIOCSIFFLAGS: %s", pcap_strerror(errno));
-			goto bad;
+
+		/*
+		 * This might be a 2.0[.x] kernel - check.
+		 */
+		if (uname(&utsname) < 0 ||
+		    strncmp(utsname.release, "2.0", 3) == 0) {
+			/*
+			 * Either we couldn't find out what kernel release
+			 * this is, or it's a 2.0[.x] kernel.
+			 *
+			 * In the 2.0[.x] kernel, a "recvfrom()" on
+			 * a SOCK_PACKET socket, with MSG_TRUNC set, will
+			 * return the number of bytes read, so if we pass
+			 * a length based on the snapshot length, it'll
+			 * return the number of bytes from the packet
+			 * copied to userland, not the actual length
+			 * of the packet.
+			 *
+			 * This means that, for example, the IP dissector
+			 * in tcpdump will get handed a packet length less
+			 * than the length in the IP header, and will
+			 * complain about "truncated-ip".
+			 *
+			 * So we don't bother trying to copy from the
+			 * kernel only the bytes in which we're interested,
+			 * but instead copy them all, just as the older
+			 * versions of libpcap for Linux did.
+			 *
+			 * Just one of many problems with packet capture
+			 * on 2.0[.x] kernels; you really want a 2.2[.x]
+			 * or later kernel if you want packet capture to
+			 * work well.
+			 */
+			handle->md.readlen = handle->bufsize;
+		} else {
+			/*
+			 * This is a 2.2[.x] or later kernel (although
+			 * why we're using SOCK_PACKET on such a system
+			 * is unknown to me).
+			 *
+			 * We can safely pass "recvfrom()" a byte count
+			 * based on the snapshot length.
+			 */
+			handle->md.readlen = handle->snapshot;
 		}
-		ifr.ifr_flags &= ~IFF_PROMISC;
-		atexit(linux_restore_ifr);
+		return 1;
+
+	} while (0);
+
+	if (sock_fd != -1)
+		close(sock_fd);
+	return 0;
+}
+
+/*
+ *  Bind the socket associated with FD to the given device using the 
+ *  interface of the old kernels.
+ */
+static int
+iface_bind_old(int fd, const char *device, char *ebuf)
+{
+	struct sockaddr	saddr;
+
+	memset(&saddr, 0, sizeof(saddr));
+	strncpy(saddr.sa_data, device, sizeof(saddr.sa_data));
+	if (bind(fd, &saddr, sizeof(saddr)) == -1) {
+		snprintf(ebuf, PCAP_ERRBUF_SIZE,
+			 "bind: %s", pcap_strerror(errno));
+		return -1;
 	}
 
-	p->md.device = strdup(device);
-	if (p->md.device == NULL) {
-		sprintf(ebuf, "malloc: %s", pcap_strerror(errno));
-		goto bad;
+	return 0;
+}
+
+
+/* ===== System calls available on all supported kernels ============== */
+
+/*
+ *  Query the kernel for the MTU of the given interface. 
+ */
+static int
+iface_get_mtu(int fd, const char *device, char *ebuf)
+{
+	struct ifreq	ifr;
+
+	if (!device)
+		return BIGGER_THAN_ALL_MTUS;
+
+	memset(&ifr, 0, sizeof(ifr));
+	strncpy(ifr.ifr_name, device, sizeof(ifr.ifr_name));
+
+	if (ioctl(fd, SIOCGIFMTU, &ifr) == -1) {
+		snprintf(ebuf, PCAP_ERRBUF_SIZE,
+			 "ioctl: %s", pcap_strerror(errno));
+		return -1;
 	}
-	p->snapshot = snaplen;
-
-	return (p);
-bad:
-	if (fd >= 0)
-		(void)close(fd);
-	if (p->buffer != NULL)
-		free(p->buffer);
-	if (p->md.device != NULL)
-		free(p->md.device);
-	free(p);
-	return (NULL);
+
+	return ifr.ifr_mtu;
 }
 
-int
-pcap_setfilter(pcap_t *p, struct bpf_program *fp)
+/*
+ *  Get the hardware type of the given interface as ARPHRD_xxx constant.
+ */
+static int
+iface_get_arptype(int fd, const char *device, char *ebuf)
 {
+	struct ifreq	ifr;
 
-	p->fcode = *fp;
-	return (0);
+	memset(&ifr, 0, sizeof(ifr));
+	strncpy(ifr.ifr_name, device, sizeof(ifr.ifr_name));
+
+	if (ioctl(fd, SIOCGIFHWADDR, &ifr) == -1) {
+		snprintf(ebuf, PCAP_ERRBUF_SIZE,
+			 "ioctl: %s", pcap_strerror(errno));
+		return -1;
+	}
+
+	return ifr.ifr_hwaddr.sa_family;
 }
 
-void
-linux_restore_ifr(void)
+#ifdef HAVE_PF_PACKET_SOCKETS
+static int
+fix_program(pcap_t *handle, struct sock_fprog *fcode)
 {
-	register int fd;
+	size_t prog_size;
+	register int i;
+	register struct bpf_insn *p;
+	struct bpf_insn *f;
+	int len;
+
+	/*
+	 * Make a copy of the filter, and modify that copy if
+	 * necessary.
+	 */
+	prog_size = sizeof(*handle->fcode.bf_insns) * handle->fcode.bf_len;
+	len = handle->fcode.bf_len;
+	f = (struct bpf_insn *)malloc(prog_size);
+	if (f == NULL) {
+		snprintf(handle->errbuf, sizeof(handle->errbuf),
+			 "malloc: %s", pcap_strerror(errno));
+		return -1;
+	}
+	memcpy(f, handle->fcode.bf_insns, prog_size);
+	fcode->len = len;
+	fcode->filter = (struct sock_filter *) f;
+
+	for (i = 0; i < len; ++i) {
+		p = &f[i];
+		/*
+		 * What type of instruction is this?
+		 */
+		switch (BPF_CLASS(p->code)) {
+
+		case BPF_RET:
+			/*
+			 * It's a return instruction; is the snapshot
+			 * length a constant, rather than the contents
+			 * of the accumulator?
+			 */
+			if (BPF_MODE(p->code) == BPF_K) {
+				/*
+				 * Yes - if the value to be returned,
+				 * i.e. the snapshot length, is anything
+				 * other than 0, make it 65535, so that
+				 * the packet is truncated by "recvfrom()",
+				 * not by the filter.
+				 *
+				 * XXX - there's nothing we can easily do
+				 * if it's getting the value from the
+				 * accumulator; we'd have to insert
+				 * code to force non-zero values to be
+				 * 65535.
+				 */
+				if (p->k != 0)
+					p->k = 65535;
+			}
+			break;
+
+		case BPF_LD:
+		case BPF_LDX:
+			/*
+			 * It's a load instruction; is it loading
+			 * from the packet?
+			 */
+			switch (BPF_MODE(p->code)) {
 
-	fd = socket(PF_INET, SOCK_PACKET, htons(0x0003));
-	if (fd < 0)
-		fprintf(stderr, "linux socket: %s", pcap_strerror(errno));
-	else if (ioctl(fd, SIOCSIFFLAGS, &saved_ifr) < 0)
-		fprintf(stderr, "linux SIOCSIFFLAGS: %s", pcap_strerror(errno));
+			case BPF_ABS:
+			case BPF_IND:
+			case BPF_MSH:
+				/*
+				 * Yes; are we in cooked mode?
+				 */
+				if (handle->md.cooked) {
+					/*
+					 * Yes, so we need to fix this
+					 * instruction.
+					 */
+					if (fix_offset(p) < 0) {
+						/*
+						 * We failed to do so.
+						 * Return 0, so our caller
+						 * knows to punt to userland.
+						 */
+						return 0;
+					}
+				}
+				break;
+			}
+			break;
+		}
+	}
+	return 1;	/* we succeeded */
+}
+
+static int
+fix_offset(struct bpf_insn *p)
+{
+	/*
+	 * What's the offset?
+	 */
+	if (p->k >= SLL_HDR_LEN) {
+		/*
+		 * It's within the link-layer payload; that starts at an
+		 * offset of 0, as far as the kernel packet filter is
+		 * concerned, so subtract the length of the link-layer
+		 * header.
+		 */
+		p->k -= SLL_HDR_LEN;
+	} else if (p->k == 14) {
+		/*
+		 * It's the protocol field; map it to the special magic
+		 * kernel offset for that field.
+		 */
+		p->k = SKF_AD_OFF + SKF_AD_PROTOCOL;
+	} else {
+		/*
+		 * It's within the header, but it's not one of those
+		 * fields; we can't do that in the kernel, so punt
+		 * to userland.
+		 */
+		return -1;
+	}
+	return 0;
 }
+#endif
diff --git a/contrib/libpcap/pcap-nit.c b/contrib/libpcap/pcap-nit.c
index 649af09..6be658d 100644
--- a/contrib/libpcap/pcap-nit.c
+++ b/contrib/libpcap/pcap-nit.c
@@ -20,7 +20,11 @@
  */
 #ifndef lint
 static const char rcsid[] =
-    "@(#) $Header: /tcpdump/master/libpcap/pcap-nit.c,v 1.31.1.1 1999/10/07 23:46:40 mcr Exp $ (LBL)";
+    "@(#) $Header: /tcpdump/master/libpcap/pcap-nit.c,v 1.39 2000/10/28 00:01:29 guy Exp $ (LBL)";
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
 #endif
 
 #include <sys/types.h>
@@ -49,7 +53,6 @@ static const char rcsid[] =
 
 #include "pcap-int.h"
 
-#include "gnuc.h"
 #ifdef HAVE_OS_PROTO_H
 #include "os-proto.h"
 #endif
@@ -91,7 +94,7 @@ pcap_read(pcap_t *p, int cnt, pcap_handler callback, u_char *user)
 		if (cc < 0) {
 			if (errno == EWOULDBLOCK)
 				return (0);
-			sprintf(p->errbuf, "pcap_read: %s",
+			snprintf(p->errbuf, sizeof(p->errbuf), "pcap_read: %s",
 				pcap_strerror(errno));
 			return (-1);
 		}
@@ -125,7 +128,8 @@ pcap_read(pcap_t *p, int cnt, pcap_handler callback, u_char *user)
 			continue;
 
 		default:
-			sprintf(p->errbuf, "bad nit state %d", nh->nh_state);
+			snprintf(p->errbuf, sizeof(p->errbuf),
+			    "bad nit state %d", nh->nh_state);
 			return (-1);
 		}
 		++p->md.stat.ps_recv;
@@ -157,7 +161,7 @@ nit_setflags(int fd, int promisc, int to_ms, char *ebuf)
 {
 	struct nit_ioc nioc;
 
-	bzero((char *)&nioc, sizeof(nioc));
+	memset(&nioc, 0, sizeof(nioc));
 	nioc.nioc_bufspace = BUFSPACE;
 	nioc.nioc_chunksize = CHUNKSIZE;
 	nioc.nioc_typetomatch = NT_ALLTYPES;
@@ -174,7 +178,8 @@ nit_setflags(int fd, int promisc, int to_ms, char *ebuf)
 		nioc.nioc_flags |= NF_PROMISC;
 
 	if (ioctl(fd, SIOCSNIT, &nioc) < 0) {
-		sprintf(ebuf, "SIOCSNIT: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "SIOCSNIT: %s",
+		    pcap_strerror(errno));
 		return (-1);
 	}
 	return (0);
@@ -189,7 +194,7 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 
 	p = (pcap_t *)malloc(sizeof(*p));
 	if (p == NULL) {
-		strcpy(ebuf, pcap_strerror(errno));
+		strlcpy(ebuf, pcap_strerror(errno), PCAP_ERRBUF_SIZE);
 		return (NULL);
 	}
 
@@ -199,18 +204,19 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 		 */
 		snaplen = 96;
 
-	bzero(p, sizeof(*p));
+	memset(p, 0, sizeof(*p));
 	p->fd = fd = socket(AF_NIT, SOCK_RAW, NITPROTO_RAW);
 	if (fd < 0) {
-		sprintf(ebuf, "socket: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE,
+		    "socket: %s", pcap_strerror(errno));
 		goto bad;
 	}
 	snit.snit_family = AF_NIT;
 	(void)strncpy(snit.snit_ifname, device, NITIFSIZ);
 
 	if (bind(fd, (struct sockaddr *)&snit, sizeof(snit))) {
-		sprintf(ebuf, "bind: %s: %s", snit.snit_ifname,
-			pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE,
+		    "bind: %s: %s", snit.snit_ifname, pcap_strerror(errno));
 		goto bad;
 	}
 	p->snapshot = snaplen;
@@ -224,7 +230,7 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 	p->bufsize = BUFSPACE;
 	p->buffer = (u_char *)malloc(p->bufsize);
 	if (p->buffer == NULL) {
-		strcpy(ebuf, pcap_strerror(errno));
+		strlcpy(ebuf, pcap_strerror(errno), PCAP_ERRBUF_SIZE);
 		goto bad;
 	}
 	return (p);
@@ -239,6 +245,7 @@ int
 pcap_setfilter(pcap_t *p, struct bpf_program *fp)
 {
 
-	p->fcode = *fp;
+	if (install_bpf_program(p, fp) < 0)
+		return (-1);
 	return (0);
 }
diff --git a/contrib/libpcap/pcap-null.c b/contrib/libpcap/pcap-null.c
index c0146bb..a4116ad 100644
--- a/contrib/libpcap/pcap-null.c
+++ b/contrib/libpcap/pcap-null.c
@@ -20,14 +20,17 @@
  */
 #ifndef lint
 static const char rcsid[] =
-    "@(#) $Header: /tcpdump/master/libpcap/pcap-null.c,v 1.7.1.1 1999/10/07 23:46:40 mcr Exp $ (LBL)";
+    "@(#) $Header: /tcpdump/master/libpcap/pcap-null.c,v 1.13 2000/10/28 00:01:29 guy Exp $ (LBL)";
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
 #endif
 
 #include <sys/param.h>			/* optionally get BSD define */
 
 #include <string.h>
 
-#include "gnuc.h"
 #ifdef HAVE_OS_PROTO_H
 #include "os-proto.h"
 #endif
@@ -39,35 +42,33 @@ static char nosup[] = "live packet capture not supported on this system";
 int
 pcap_stats(pcap_t *p, struct pcap_stat *ps)
 {
-
-	(void)sprintf(p->errbuf, "pcap_stats: %s", nosup);
+	(void)snprintf(p->errbuf, sizeof(p->errbuf), "pcap_stats: %s", nosup);
 	return (-1);
 }
 
 int
 pcap_read(pcap_t *p, int cnt, pcap_handler callback, u_char *user)
 {
-
-	(void)sprintf(p->errbuf, "pcap_read: %s", nosup);
+	(void)snprintf(p->errbuf, sizeof(p->errbuf), "pcap_read: %s", nosup);
 	return (-1);
 }
 
 pcap_t *
 pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 {
-
-	(void)strcpy(ebuf, nosup);
+	(void)strlcpy(ebuf, nosup, PCAP_ERRBUF_SIZE);
 	return (NULL);
 }
 
 int
 pcap_setfilter(pcap_t *p, struct bpf_program *fp)
 {
-
 	if (p->sf.rfile == NULL) {
-		(void)sprintf(p->errbuf, "pcap_setfilter: %s", nosup);
+		(void)snprintf(p->errbuf, sizeof(p->errbuf),
+		    "pcap_setfilter: %s", nosup);
 		return (-1);
 	}
-	p->fcode = *fp;
+	if (install_bpf_program(p, fp) < 0)
+		return (-1);
 	return (0);
 }
diff --git a/contrib/libpcap/pcap-pf.c b/contrib/libpcap/pcap-pf.c
index d2f3a37..2dec908 100644
--- a/contrib/libpcap/pcap-pf.c
+++ b/contrib/libpcap/pcap-pf.c
@@ -24,7 +24,11 @@
 
 #ifndef lint
 static const char rcsid[] =
-    "@(#) $Header: /tcpdump/master/libpcap/pcap-pf.c,v 1.54.1.1 1999/10/07 23:46:40 mcr Exp $ (LBL)";
+    "@(#) $Header: /tcpdump/master/libpcap/pcap-pf.c,v 1.62 2000/10/28 00:01:30 guy Exp $ (LBL)";
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
 #endif
 
 #include <sys/types.h>
@@ -35,11 +39,8 @@ static const char rcsid[] =
 #include <sys/ioctl.h>
 #include <net/pfilt.h>
 
-#if __STDC__
 struct mbuf;
 struct rtentry;
-#endif
-
 #include <net/if.h>
 
 #include <netinet/in.h>
@@ -62,7 +63,6 @@ struct rtentry;
 
 #include "pcap-int.h"
 
-#include "gnuc.h"
 #ifdef HAVE_OS_PROTO_H
 #include "os-proto.h"
 #endif
@@ -108,7 +108,7 @@ pcap_read(pcap_t *pc, int cnt, pcap_handler callback, u_char *user)
 				(void)lseek(pc->fd, 0L, SEEK_SET);
 				goto again;
 			}
-			sprintf(pc->errbuf, "pf read: %s",
+			snprintf(pc->errbuf, sizeof(pc->errbuf), "pf read: %s",
 				pcap_strerror(errno));
 			return (-1);
 		}
@@ -127,7 +127,8 @@ pcap_read(pcap_t *pc, int cnt, pcap_handler callback, u_char *user)
 #endif
 	while (cc > 0) {
 		if (cc < sizeof(*sp)) {
-			sprintf(pc->errbuf, "pf short read (%d)", cc);
+			snprintf(pc->errbuf, sizeof(pc->errbuf),
+			    "pf short read (%d)", cc);
 			return (-1);
 		}
 #ifdef LBL_ALIGN
@@ -138,7 +139,8 @@ pcap_read(pcap_t *pc, int cnt, pcap_handler callback, u_char *user)
 #endif
 			sp = (struct enstamp *)bp;
 		if (sp->ens_stamplen != sizeof(*sp)) {
-			sprintf(pc->errbuf, "pf short stamplen (%d)",
+			snprintf(pc->errbuf, sizeof(pc->errbuf),
+			    "pf short stamplen (%d)",
 			    sp->ens_stamplen);
 			return (-1);
 		}
@@ -210,13 +212,14 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 
 	p = (pcap_t *)malloc(sizeof(*p));
 	if (p == NULL) {
-		sprintf(ebuf, "pcap_open_live: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE,
+		    "pcap_open_live: %s", pcap_strerror(errno));
 		return (0);
 	}
-	bzero((char *)p, sizeof(*p));
+	memset(p, 0, sizeof(*p));
 	p->fd = pfopen(device, O_RDONLY);
 	if (p->fd < 0) {
-		sprintf(ebuf, "pf open: %s: %s\n\
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "pf open: %s: %s\n\
 your system may not be properly configured; see \"man packetfilter(4)\"\n",
 			device, pcap_strerror(errno));
 		goto bad;
@@ -226,7 +229,8 @@ your system may not be properly configured; see \"man packetfilter(4)\"\n",
 	if (promisc)
 		enmode |= ENPROMISC;
 	if (ioctl(p->fd, EIOCMBIS, (caddr_t)&enmode) < 0) {
-		sprintf(ebuf, "EIOCMBIS: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "EIOCMBIS: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 #ifdef	ENCOPYALL
@@ -236,12 +240,14 @@ your system may not be properly configured; see \"man packetfilter(4)\"\n",
 #endif
 	/* set the backlog */
 	if (ioctl(p->fd, EIOCSETW, (caddr_t)&backlog) < 0) {
-		sprintf(ebuf, "EIOCSETW: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "EIOCSETW: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 	/* discover interface type */
 	if (ioctl(p->fd, EIOCDEVP, (caddr_t)&devparams) < 0) {
-		sprintf(ebuf, "EIOCDEVP: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "EIOCDEVP: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 	/* HACK: to compile prior to Ultrix 4.2 */
@@ -282,16 +288,18 @@ your system may not be properly configured; see \"man packetfilter(4)\"\n",
 		snaplen += pcap_fddipad;
 #endif
 	if (ioctl(p->fd, EIOCTRUNCATE, (caddr_t)&snaplen) < 0) {
-		sprintf(ebuf, "EIOCTRUNCATE: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "EIOCTRUNCATE: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 	p->snapshot = snaplen;
 	/* accept all packets */
-	bzero((char *)&Filter, sizeof(Filter));
+	memset(&Filter, 0, sizeof(Filter));
 	Filter.enf_Priority = 37;	/* anything > 2 */
 	Filter.enf_FilterLen = 0;	/* means "always true" */
 	if (ioctl(p->fd, EIOCSETF, (caddr_t)&Filter) < 0) {
-		sprintf(ebuf, "EIOCSETF: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "EIOCSETF: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 
@@ -300,7 +308,7 @@ your system may not be properly configured; see \"man packetfilter(4)\"\n",
 		timeout.tv_sec = to_ms / 1000;
 		timeout.tv_usec = (to_ms * 1000) % 1000000;
 		if (ioctl(p->fd, EIOCSRTIMEOUT, (caddr_t)&timeout) < 0) {
-			sprintf(ebuf, "EIOCSRTIMEOUT: %s",
+			snprintf(ebuf, PCAP_ERRBUF_SIZE, "EIOCSRTIMEOUT: %s",
 				pcap_strerror(errno));
 			goto bad;
 		}
@@ -326,8 +334,8 @@ pcap_setfilter(pcap_t *p, struct bpf_program *fp)
 		struct bpf_version bv;
 
 		if (ioctl(p->fd, BIOCVERSION, (caddr_t)&bv) < 0) {
-			sprintf(p->errbuf, "BIOCVERSION: %s",
-				pcap_strerror(errno));
+			snprintf(p->errbuf, sizeof(p->errbuf),
+			    "BIOCVERSION: %s", pcap_strerror(errno));
 			return (-1);
 		}
 		else if (bv.bv_major != BPF_MAJOR_VERSION ||
@@ -339,8 +347,10 @@ pcap_setfilter(pcap_t *p, struct bpf_program *fp)
 			/* don't give up, just be inefficient */
 			p->md.use_bpf = 0;
 		}
-	} else
-		p->fcode = *fp;
+	} else {
+		if (install_bpf_program(p, fp) < 0)
+			return (-1);
+	}
 
 	/*XXX this goes in tcpdump*/
 	if (p->md.use_bpf)
diff --git a/contrib/libpcap/pcap-snit.c b/contrib/libpcap/pcap-snit.c
index ec9b44d8..59cf3ac 100644
--- a/contrib/libpcap/pcap-snit.c
+++ b/contrib/libpcap/pcap-snit.c
@@ -25,7 +25,11 @@
 
 #ifndef lint
 static const char rcsid[] =
-    "@(#) $Header: /tcpdump/master/libpcap/pcap-snit.c,v 1.45.1.1 1999/10/07 23:46:40 mcr Exp $ (LBL)";
+    "@(#) $Header: /tcpdump/master/libpcap/pcap-snit.c,v 1.54 2000/10/28 00:01:30 guy Exp $ (LBL)";
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
 #endif
 
 #include <sys/types.h>
@@ -56,16 +60,12 @@ static const char rcsid[] =
 
 #include <ctype.h>
 #include <errno.h>
-#ifdef HAVE_MALLOC_H
-#include <malloc.h>
-#endif
 #include <stdio.h>
 #include <string.h>
 #include <unistd.h>
 
 #include "pcap-int.h"
 
-#include "gnuc.h"
 #ifdef HAVE_OS_PROTO_H
 #include "os-proto.h"
 #endif
@@ -110,7 +110,7 @@ pcap_read(pcap_t *p, int cnt, pcap_handler callback, u_char *user)
 		if (cc < 0) {
 			if (errno == EWOULDBLOCK)
 				return (0);
-			sprintf(p->errbuf, "pcap_read: %s",
+			snprintf(p->errbuf, sizeof(p->errbuf), "pcap_read: %s",
 				pcap_strerror(errno));
 			return (-1);
 		}
@@ -182,7 +182,8 @@ nit_setflags(int fd, int promisc, int to_ms, char *ebuf)
 		si.ic_len = sizeof(timeout);
 		si.ic_dp = (char *)&timeout;
 		if (ioctl(fd, I_STR, (char *)&si) < 0) {
-			sprintf(ebuf, "NIOCSTIME: %s", pcap_strerror(errno));
+			snprintf(ebuf, PCAP_ERRBUF_SIZE, "NIOCSTIME: %s",
+			    pcap_strerror(errno));
 			return (-1);
 		}
 	}
@@ -193,7 +194,8 @@ nit_setflags(int fd, int promisc, int to_ms, char *ebuf)
 	si.ic_len = sizeof(flags);
 	si.ic_dp = (char *)&flags;
 	if (ioctl(fd, I_STR, (char *)&si) < 0) {
-		sprintf(ebuf, "NIOCSFLAGS: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "NIOCSFLAGS: %s",
+		    pcap_strerror(errno));
 		return (-1);
 	}
 	return (0);
@@ -211,7 +213,7 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 
 	p = (pcap_t *)malloc(sizeof(*p));
 	if (p == NULL) {
-		strcpy(ebuf, pcap_strerror(errno));
+		strlcpy(ebuf, pcap_strerror(errno), PCAP_ERRBUF_SIZE);
 		return (NULL);
 	}
 
@@ -221,20 +223,23 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 		 */
 		snaplen = 96;
 
-	bzero(p, sizeof(*p));
+	memset(p, 0, sizeof(*p));
 	p->fd = fd = open(dev, O_RDONLY);
 	if (fd < 0) {
-		sprintf(ebuf, "%s: %s", dev, pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s: %s", dev,
+		    pcap_strerror(errno));
 		goto bad;
 	}
 
 	/* arrange to get discrete messages from the STREAM and use NIT_BUF */
 	if (ioctl(fd, I_SRDOPT, (char *)RMSGD) < 0) {
-		sprintf(ebuf, "I_SRDOPT: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "I_SRDOPT: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 	if (ioctl(fd, I_PUSH, "nbuf") < 0) {
-		sprintf(ebuf, "push nbuf: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "push nbuf: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 	/* set the chunksize */
@@ -243,7 +248,8 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 	si.ic_len = sizeof(chunksize);
 	si.ic_dp = (char *)&chunksize;
 	if (ioctl(fd, I_STR, (char *)&si) < 0) {
-		sprintf(ebuf, "NIOCSCHUNK: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "NIOCSCHUNK: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 
@@ -254,7 +260,7 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 	si.ic_len = sizeof(ifr);
 	si.ic_dp = (char *)&ifr;
 	if (ioctl(fd, I_STR, (char *)&si) < 0) {
-		sprintf(ebuf, "NIOCBIND: %s: %s",
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "NIOCBIND: %s: %s",
 			ifr.ifr_name, pcap_strerror(errno));
 		goto bad;
 	}
@@ -264,7 +270,8 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 	si.ic_len = sizeof(snaplen);
 	si.ic_dp = (char *)&snaplen;
 	if (ioctl(fd, I_STR, (char *)&si) < 0) {
-		sprintf(ebuf, "NIOCSSNAP: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "NIOCSSNAP: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 	p->snapshot = snaplen;
@@ -280,7 +287,7 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 	p->bufsize = BUFSPACE;
 	p->buffer = (u_char *)malloc(p->bufsize);
 	if (p->buffer == NULL) {
-		strcpy(ebuf, pcap_strerror(errno));
+		strlcpy(ebuf, pcap_strerror(errno), PCAP_ERRBUF_SIZE);
 		goto bad;
 	}
 	return (p);
@@ -295,6 +302,7 @@ int
 pcap_setfilter(pcap_t *p, struct bpf_program *fp)
 {
 
-	p->fcode = *fp;
+	if (install_bpf_program(p, fp) < 0)
+		return (-1);
 	return (0);
 }
diff --git a/contrib/libpcap/pcap-snoop.c b/contrib/libpcap/pcap-snoop.c
index 1999c1b..65ad273 100644
--- a/contrib/libpcap/pcap-snoop.c
+++ b/contrib/libpcap/pcap-snoop.c
@@ -20,7 +20,11 @@
  */
 #ifndef lint
 static const char rcsid[] =
-    "@(#) $Header: /tcpdump/master/libpcap/pcap-snoop.c,v 1.20.1.1 1999/10/07 23:46:40 mcr Exp $ (LBL)";
+    "@(#) $Header: /tcpdump/master/libpcap/pcap-snoop.c,v 1.30 2000/10/28 00:01:30 guy Exp $ (LBL)";
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
 #endif
 
 #include <sys/param.h>
@@ -50,7 +54,6 @@ static const char rcsid[] =
 
 #include "pcap-int.h"
 
-#include "gnuc.h"
 #ifdef HAVE_OS_PROTO_H
 #include "os-proto.h"
 #endif
@@ -76,7 +79,8 @@ again:
 		case EWOULDBLOCK:
 			return (0);			/* XXX */
 		}
-		sprintf(p->errbuf, "read: %s", pcap_strerror(errno));
+		snprintf(p->errbuf, sizeof(p->errbuf),
+		    "read: %s", pcap_strerror(errno));
 		return (-1);
 	}
 	sh = (struct snoopheader *)p->buffer;
@@ -104,9 +108,10 @@ pcap_stats(pcap_t *p, struct pcap_stat *ps)
 	struct rawstats rawstats;
 
 	rs = &rawstats;
-	bzero((char *)rs, sizeof(*rs));
+	memset(rs, 0, sizeof(*rs));
 	if (ioctl(p->fd, SIOCRAWSTATS, (char *)rs) < 0) {
-		sprintf(p->errbuf, "SIOCRAWSTATS: %s", pcap_strerror(errno));
+		snprintf(p->errbuf, sizeof(p->errbuf),
+		    "SIOCRAWSTATS: %s", pcap_strerror(errno));
 		return (-1);
 	}
 
@@ -126,44 +131,41 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 	struct sockaddr_raw sr;
 	struct snoopfilter sf;
 	u_int v;
+	int ll_hdrlen;
+	int snooplen;
 	pcap_t *p;
+	struct ifreq ifr;
 
 	p = (pcap_t *)malloc(sizeof(*p));
 	if (p == NULL) {
-		sprintf(ebuf, "malloc: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "malloc: %s",
+		    pcap_strerror(errno));
 		return (NULL);
 	}
-	bzero((char *)p, sizeof(*p));
+	memset(p, 0, sizeof(*p));
 	fd = socket(PF_RAW, SOCK_RAW, RAWPROTO_SNOOP);
 	if (fd < 0) {
-		sprintf(ebuf, "snoop socket: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "snoop socket: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 	p->fd = fd;
-	bzero((char *)&sr, sizeof(sr));
+	memset(&sr, 0, sizeof(sr));
 	sr.sr_family = AF_RAW;
 	(void)strncpy(sr.sr_ifname, device, sizeof(sr.sr_ifname));
 	if (bind(fd, (struct sockaddr *)&sr, sizeof(sr))) {
-		sprintf(ebuf, "snoop bind: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "snoop bind: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
-	bzero((char *)&sf, sizeof(sf));
+	memset(&sf, 0, sizeof(sf));
 	if (ioctl(fd, SIOCADDSNOOP, &sf) < 0) {
-		sprintf(ebuf, "SIOCADDSNOOP: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "SIOCADDSNOOP: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 	v = 64 * 1024;
 	(void)setsockopt(fd, SOL_SOCKET, SO_RCVBUF, (char *)&v, sizeof(v));
-	if (ioctl(fd, SIOCSNOOPLEN, &snaplen) < 0) {
-		sprintf(ebuf, "SIOCSNOOPLEN: %s", pcap_strerror(errno));
-		goto bad;
-	}
-	p->snapshot = snaplen;
-	v = 1;
-	if (ioctl(fd, SIOCSNOOPING, &v) < 0) {
-		sprintf(ebuf, "SIOCSNOOPING: %s", pcap_strerror(errno));
-		goto bad;
-	}
 	/*
 	 * XXX hack - map device name to link layer type
 	 */
@@ -176,27 +178,88 @@ pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
 	    strncmp("ep", device, 2) == 0 ||	/* Challenge 8x10 Mbit EPLEX */
 	    strncmp("vfe", device, 3) == 0 ||	/* Challenge VME 100Mbit */
 	    strncmp("fa", device, 2) == 0 ||
-	    strncmp("qaa", device, 3) == 0) {
+	    strncmp("qaa", device, 3) == 0 ||
+	    strncmp("el", device, 2) == 0) {
 		p->linktype = DLT_EN10MB;
 		p->offset = RAW_HDRPAD(sizeof(struct ether_header));
+		ll_hdrlen = sizeof(struct ether_header);
 	} else if (strncmp("ipg", device, 3) == 0 ||
 		   strncmp("rns", device, 3) == 0 ||	/* O2/200/2000 FDDI */
 		   strncmp("xpi", device, 3) == 0) {
 		p->linktype = DLT_FDDI;
 		p->offset = 3;				/* XXX yeah? */
+		ll_hdrlen = 13;
 	} else if (strncmp("ppp", device, 3) == 0) {
 		p->linktype = DLT_RAW;
+		ll_hdrlen = 0;	/* DLT_RAW meaning "no PPP header, just the IP packet"? */
 	} else if (strncmp("lo", device, 2) == 0) {
 		p->linktype = DLT_NULL;
+		ll_hdrlen = 4;	/* is this just like BSD's loopback device? */
 	} else {
-		sprintf(ebuf, "snoop: unknown physical layer type");
+		snprintf(ebuf, PCAP_ERRBUF_SIZE,
+		    "snoop: unknown physical layer type");
+		goto bad;
+	}
+#ifdef SIOCGIFMTU
+	/*
+	 * XXX - IRIX appears to give you an error if you try to set the
+	 * capture length to be greater than the MTU, so let's try to get
+	 * the MTU first and, if that succeeds, trim the snap length
+	 * to be no greater than the MTU.
+	 */
+	(void)strncpy(ifr.ifr_name, device, sizeof(ifr.ifr_name));
+	if (ioctl(fd, SIOCGIFMTU, (char *)&ifr) < 0) {
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "SIOCGIFMTU: %s",
+		    pcap_strerror(errno));
+		goto bad;
+	}
+	/*
+	 * OK, we got it.
+	 *
+	 * XXX - some versions of IRIX 6.5 define "ifr_mtu" and have an
+	 * "ifru_metric" member of the "ifr_ifru" union in an "ifreq"
+	 * structure, others don't.
+	 *
+	 * I've no idea what's going on, so, if "ifr_mtu" isn't defined,
+	 * we define it as "ifr_metric", as using that field appears to
+	 * work on the versions that lack "ifr_mtu" (and, on those that
+	 * don't lack it, "ifru_metric" and "ifru_mtu" are both "int"
+	 * members of the "ifr_ifru" union, which suggests that they
+	 * may be interchangeable in this case).
+	 */
+#ifndef ifr_mtu
+#define ifr_mtu	ifr_metric
+#endif
+	if (snaplen > ifr.ifr_mtu)
+		snaplen = ifr.ifr_mtu;
+#endif
+
+	/*
+	 * The argument to SIOCSNOOPLEN is the number of link-layer
+	 * payload bytes to capture - it doesn't count link-layer
+	 * header bytes.
+	 */
+	snooplen = snaplen - ll_hdrlen;
+	if (snooplen < 0)
+		snooplen = 0;
+	if (ioctl(fd, SIOCSNOOPLEN, &snooplen) < 0) {
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "SIOCSNOOPLEN: %s",
+		    pcap_strerror(errno));
+		goto bad;
+	}
+	p->snapshot = snaplen;
+	v = 1;
+	if (ioctl(fd, SIOCSNOOPING, &v) < 0) {
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "SIOCSNOOPING: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 
 	p->bufsize = 4096;				/* XXX */
 	p->buffer = (u_char *)malloc(p->bufsize);
 	if (p->buffer == NULL) {
-		sprintf(ebuf, "malloc: %s", pcap_strerror(errno));
+		snprintf(ebuf, PCAP_ERRBUF_SIZE, "malloc: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
 
@@ -211,6 +274,7 @@ int
 pcap_setfilter(pcap_t *p, struct bpf_program *fp)
 {
 
-	p->fcode = *fp;
+	if (install_bpf_program(p, fp) < 0)
+		return (-1);
 	return (0);
 }
diff --git a/contrib/libpcap/pcap.c b/contrib/libpcap/pcap.c
index 3b857f6..9f32721 100644
--- a/contrib/libpcap/pcap.c
+++ b/contrib/libpcap/pcap.c
@@ -33,7 +33,11 @@
 
 #ifndef lint
 static const char rcsid[] =
-    "@(#) $Header: /tcpdump/master/libpcap/pcap.c,v 1.29.1.1 1999/10/07 23:46:40 mcr Exp $ (LBL)";
+    "@(#) $Header: /tcpdump/master/libpcap/pcap.c,v 1.36 2000/12/16 10:43:31 guy Exp $ (LBL)";
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
 #endif
 
 #include <sys/types.h>
@@ -43,7 +47,6 @@ static const char rcsid[] =
 #include <string.h>
 #include <unistd.h>
 
-#include "gnuc.h"
 #ifdef HAVE_OS_PROTO_H
 #include "os-proto.h"
 #endif
@@ -180,27 +183,44 @@ pcap_strerror(int errnum)
 
 	if ((unsigned int)errnum < sys_nerr)
 		return ((char *)sys_errlist[errnum]);
-	(void)sprintf(ebuf, "Unknown error: %d", errnum);
+	(void)snprintf(ebuf, sizeof ebuf, "Unknown error: %d", errnum);
 	return(ebuf);
 #endif
 }
 
+pcap_t *
+pcap_open_dead(int linktype, int snaplen)
+{
+	pcap_t *p;
+
+	p = malloc(sizeof(*p));
+	if (p == NULL)
+		return NULL;
+	memset (p, 0, sizeof(*p));
+	p->fd = -1;
+	p->snapshot = snaplen;
+	p->linktype = linktype;
+	return p;
+}
+
 void
 pcap_close(pcap_t *p)
 {
 	/*XXX*/
-	if (p->fd >= 0)
+	if (p->fd >= 0) {
+#ifdef linux
+		pcap_close_linux(p);
+#endif
 		close(p->fd);
+	}
 	if (p->sf.rfile != NULL) {
-		(void)fclose(p->sf.rfile);
+		if (p->sf.rfile != stdin)
+			(void)fclose(p->sf.rfile);
 		if (p->sf.base != NULL)
 			free(p->sf.base);
 	} else if (p->buffer != NULL)
 		free(p->buffer);
-#ifdef linux
-	if (p->md.device != NULL)
-		free(p->md.device);
-#endif
 	
+	pcap_freecode(&p->fcode);
 	free(p);
 }
diff --git a/contrib/libpcap/savefile.c b/contrib/libpcap/savefile.c
index c92aef2..cc5b47e 100644
--- a/contrib/libpcap/savefile.c
+++ b/contrib/libpcap/savefile.c
@@ -30,7 +30,11 @@
 
 #ifndef lint
 static const char rcsid[] =
-    "@(#) $Header: /tcpdump/master/libpcap/savefile.c,v 1.38 1999/11/21 01:11:58 assar Exp $ (LBL)";
+    "@(#) $Header: /tcpdump/master/libpcap/savefile.c,v 1.49 2000/12/21 10:29:23 guy Exp $ (LBL)";
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
 #endif
 
 #include <sys/types.h>
@@ -40,16 +44,17 @@ static const char rcsid[] =
 #include <memory.h>
 #include <stdio.h>
 #include <stdlib.h>
+#include <string.h>
 #include <unistd.h>
 
 #include "pcap-int.h"
 
-#include "gnuc.h"
 #ifdef HAVE_OS_PROTO_H
 #include "os-proto.h"
 #endif
 
 #define TCPDUMP_MAGIC 0xa1b2c3d4
+#define PATCHED_TCPDUMP_MAGIC 0xa1b2cd34
 
 /*
  * We use the "receiver-makes-right" approach to byte order,
@@ -71,6 +76,212 @@ static const char rcsid[] =
 #define SFERR_BADF		3
 #define SFERR_EOF		4 /* not really an error, just a status */
 
+/*
+ * We don't write DLT_* values to the capture file header, because
+ * they're not the same on all platforms.
+ *
+ * Unfortunately, the various flavors of BSD have not always used the same
+ * numerical values for the same data types, and various patches to
+ * libpcap for non-BSD OSes have added their own DLT_* codes for link
+ * layer encapsulation types seen on those OSes, and those codes have had,
+ * in some cases, values that were also used, on other platforms, for other
+ * link layer encapsulation types.
+ *
+ * This means that capture files of a type whose numerical DLT_* code
+ * means different things on different BSDs, or with different versions
+ * of libpcap, can't always be read on systems other than those like
+ * the one running on the machine on which the capture was made.
+ *
+ * Instead, we define here a set of LINKTYPE_* codes, and map DLT_* codes
+ * to LINKTYPE_* codes when writing a savefile header, and map LINKTYPE_*
+ * codes to DLT_* codes when reading a savefile header.
+ *
+ * For those DLT_* codes that have, as far as we know, the same values on
+ * all platforms (DLT_NULL through DLT_FDDI), we define LINKTYPE_xxx as
+ * DLT_xxx; that way, captures of those types can still be read by
+ * versions of libpcap that map LINKTYPE_* values to DLT_* values, and
+ * captures of those types written by versions of libpcap that map DLT_
+ * values to LINKTYPE_ values can still be read by older versions
+ * of libpcap.
+ *
+ * The other LINKTYPE_* codes are given values starting at 100, in the
+ * hopes that no DLT_* code will be given one of those values.
+ *
+ * In order to ensure that a given LINKTYPE_* code's value will refer to
+ * the same encapsulation type on all platforms, you should not allocate
+ * a new LINKTYPE_* value without consulting "tcpdump-workers@tcpdump.org".
+ * The tcpdump developers will allocate a value for you, and will not
+ * subsequently allocate it to anybody else; that value will be added to
+ * the "pcap.h" in the tcpdump.org CVS repository, so that a future
+ * libpcap release will include it.
+ *
+ * You should, if possible, also contribute patches to libpcap and tcpdump
+ * to handle the new encapsulation type, so that they can also be checked
+ * into the tcpdump.org CVS repository and so that they will appear in
+ * future libpcap and tcpdump releases.
+ */
+#define LINKTYPE_NULL		DLT_NULL
+#define LINKTYPE_ETHERNET	DLT_EN10MB	/* also for 100Mb and up */
+#define LINKTYPE_EXP_ETHERNET	DLT_EN3MB	/* 3Mb experimental Ethernet */
+#define LINKTYPE_AX25		DLT_AX25
+#define LINKTYPE_PRONET		DLT_PRONET
+#define LINKTYPE_CHAOS		DLT_CHAOS
+#define LINKTYPE_TOKEN_RING	DLT_IEEE802	/* DLT_IEEE802 is used for Token Ring */
+#define LINKTYPE_ARCNET		DLT_ARCNET
+#define LINKTYPE_SLIP		DLT_SLIP
+#define LINKTYPE_PPP		DLT_PPP
+#define LINKTYPE_FDDI		DLT_FDDI
+
+/*
+ * LINKTYPE_PPP is for use when there might, or might not, be an RFC 1662
+ * PPP in HDLC-like framing header (with 0xff 0x03 before the PPP protocol
+ * field) at the beginning of the packet.
+ *
+ * This is for use when there is always such a header; the address field
+ * might be 0xff, for regular PPP, or it might be an address field for Cisco
+ * point-to-point with HDLC framing as per section 4.3.1 of RFC 1547 ("Cisco
+ * HDLC").  This is, for example, what you get with NetBSD's DLT_PPP_SERIAL.
+ *
+ * We give it the same value as NetBSD's DLT_PPP_SERIAL, in the hopes that
+ * nobody else will choose a DLT_ value of 50, and so that DLT_PPP_SERIAL
+ * captures will be written out with a link type that NetBSD's tcpdump
+ * can read.
+ */
+#define LINKTYPE_PPP_HDLC	50		/* PPP in HDLC-like framing */
+
+#define LINKTYPE_ATM_RFC1483	100		/* LLC/SNAP-encapsulated ATM */
+#define LINKTYPE_RAW		101		/* raw IP */
+#define LINKTYPE_SLIP_BSDOS	102		/* BSD/OS SLIP BPF header */
+#define LINKTYPE_PPP_BSDOS	103		/* BSD/OS PPP BPF header */
+#define LINKTYPE_C_HDLC		104		/* Cisco HDLC */
+#define LINKTYPE_ATM_CLIP	106		/* Linux Classical IP over ATM */
+
+/*
+ * Reserved for future use.
+ */
+#define LINKTYPE_IEEE802_11	105		/* IEEE 802.11 (wireless) */
+#define LINKTYPE_FR		107		/* BSD/OS Frame Relay */
+#define LINKTYPE_LOOP		108		/* OpenBSD loopback */
+#define LINKTYPE_ENC		109		/* OpenBSD IPSEC enc */
+#define LINKTYPE_LANE8023	110		/* ATM LANE + 802.3 */
+#define LINKTYPE_HIPPI		111		/* NetBSD HIPPI */
+#define LINKTYPE_HDLC		112		/* NetBSD HDLC framing */
+
+#define LINKTYPE_LINUX_SLL	113		/* Linux cooked socket capture */
+
+static struct linktype_map {
+	int	dlt;
+	int	linktype;
+} map[] = {
+	/*
+	 * These DLT_* codes have LINKTYPE_* codes with values identical
+	 * to the values of the corresponding DLT_* code.
+	 */
+	{ DLT_NULL,		LINKTYPE_NULL },
+	{ DLT_EN10MB,		LINKTYPE_ETHERNET },
+	{ DLT_EN3MB,		LINKTYPE_EXP_ETHERNET },
+	{ DLT_AX25,		LINKTYPE_AX25 },
+	{ DLT_PRONET,		LINKTYPE_PRONET },
+	{ DLT_CHAOS,		LINKTYPE_CHAOS },
+	{ DLT_IEEE802,		LINKTYPE_TOKEN_RING },
+	{ DLT_ARCNET,		LINKTYPE_ARCNET },
+	{ DLT_SLIP,		LINKTYPE_SLIP },
+	{ DLT_PPP,		LINKTYPE_PPP },
+	{ DLT_FDDI,	 	LINKTYPE_FDDI },
+
+	/*
+	 * These DLT_* codes have different values on different
+	 * platforms; we map them to LINKTYPE_* codes that
+	 * have values that should never be equal to any DLT_*
+	 * code.
+	 */
+	{ DLT_ATM_RFC1483, 	LINKTYPE_ATM_RFC1483 },
+	{ DLT_RAW,		LINKTYPE_RAW },
+	{ DLT_SLIP_BSDOS,	LINKTYPE_SLIP_BSDOS },
+	{ DLT_PPP_BSDOS,	LINKTYPE_PPP_BSDOS },
+
+	/* BSD/OS Cisco HDLC */
+	{ DLT_C_HDLC,		LINKTYPE_C_HDLC },
+
+	/*
+	 * These DLT_* codes are not on all platforms, but, so far,
+	 * there don't appear to be any platforms that define
+	 * other codes with those values; we map them to
+	 * different LINKTYPE_* values anyway, just in case.
+	 */
+
+	/* Linux ATM Classical IP */
+	{ DLT_ATM_CLIP,		LINKTYPE_ATM_CLIP },
+
+	/* NetBSD sync/async serial PPP (or Cisco HDLC) */
+	{ DLT_PPP_SERIAL,	LINKTYPE_PPP_HDLC },
+
+	/* IEEE 802.11 wireless */
+	{ DLT_IEEE802_11,	LINKTYPE_IEEE802_11 },
+
+	/* OpenBSD loopback */
+	{ DLT_LOOP,		LINKTYPE_LOOP },
+
+	/* Linux cooked socket capture */
+	{ DLT_LINUX_SLL,	LINKTYPE_LINUX_SLL },
+
+	/*
+	 * Any platform that defines additional DLT_* codes should:
+	 *
+	 *	request a LINKTYPE_* code and value from tcpdump.org,
+	 *	as per the above;
+	 *
+	 *	add, in their version of libpcap, an entry to map
+	 *	those DLT_* codes to the corresponding LINKTYPE_*
+	 *	code;
+	 *
+	 *	redefine, in their "net/bpf.h", any DLT_* values
+	 *	that collide with the values used by their additional
+	 *	DLT_* codes, to remove those collisions (but without
+	 *	making them collide with any of the LINKTYPE_*
+	 *	values equal to 50 or above; they should also avoid
+	 *	defining DLT_* values that collide with those
+	 *	LINKTYPE_* values, either).
+	 */
+	{ -1,			-1 }
+};
+
+static int
+dlt_to_linktype(int dlt)
+{
+	int i;
+
+	for (i = 0; map[i].dlt != -1; i++) {
+		if (map[i].dlt == dlt)
+			return (map[i].linktype);
+	}
+
+	/*
+	 * If we don't have a mapping for this DLT_ code, return an
+	 * error; that means that the table above needs to have an
+	 * entry added.
+	 */
+	return (-1);
+}
+
+static int
+linktype_to_dlt(int linktype)
+{
+	int i;
+
+	for (i = 0; map[i].linktype != -1; i++) {
+		if (map[i].linktype == linktype)
+			return (map[i].dlt);
+	}
+
+	/*
+	 * If we don't have an entry for this link type, return
+	 * the link type value; it may be a DLT_ value from an
+	 * older version of libpcap.
+	 */
+	return linktype;
+}
+
 static int
 sf_write_header(FILE *fp, int linktype, int thiszone, int snaplen)
 {
@@ -108,11 +319,12 @@ pcap_open_offline(const char *fname, char *errbuf)
 	register pcap_t *p;
 	register FILE *fp;
 	struct pcap_file_header hdr;
+	bpf_u_int32 magic;
 	int linklen;
 
 	p = (pcap_t *)malloc(sizeof(*p));
 	if (p == NULL) {
-		strcpy(errbuf, "out of swap");
+		strlcpy(errbuf, "out of swap", PCAP_ERRBUF_SIZE);
 		return (NULL);
 	}
 
@@ -127,29 +339,44 @@ pcap_open_offline(const char *fname, char *errbuf)
 	else {
 		fp = fopen(fname, "r");
 		if (fp == NULL) {
-			sprintf(errbuf, "%s: %s", fname, pcap_strerror(errno));
+			snprintf(errbuf, PCAP_ERRBUF_SIZE, "%s: %s", fname,
+			    pcap_strerror(errno));
 			goto bad;
 		}
 	}
 	if (fread((char *)&hdr, sizeof(hdr), 1, fp) != 1) {
-		sprintf(errbuf, "fread: %s", pcap_strerror(errno));
+		snprintf(errbuf, PCAP_ERRBUF_SIZE, "fread: %s",
+		    pcap_strerror(errno));
 		goto bad;
 	}
-	if (hdr.magic != TCPDUMP_MAGIC) {
-		if (SWAPLONG(hdr.magic) != TCPDUMP_MAGIC) {
-			sprintf(errbuf, "bad dump file format");
+	magic = hdr.magic;
+	if (magic != TCPDUMP_MAGIC && magic != PATCHED_TCPDUMP_MAGIC) {
+		magic = SWAPLONG(magic);
+		if (magic != TCPDUMP_MAGIC && magic != PATCHED_TCPDUMP_MAGIC) {
+			snprintf(errbuf, PCAP_ERRBUF_SIZE,
+			    "bad dump file format");
 			goto bad;
 		}
 		p->sf.swapped = 1;
 		swap_hdr(&hdr);
 	}
+	if (magic == PATCHED_TCPDUMP_MAGIC) {
+		/*
+		 * XXX - the patch that's in some versions of libpcap
+		 * changes the packet header but not the magic number;
+		 * we'd have to use some hacks^H^H^H^H^Hheuristics to
+		 * detect that.
+		 */
+		p->sf.hdrsize = sizeof(struct pcap_sf_patched_pkthdr);
+	} else
+		p->sf.hdrsize = sizeof(struct pcap_sf_pkthdr);
 	if (hdr.version_major < PCAP_VERSION_MAJOR) {
-		sprintf(errbuf, "archaic file format");
+		snprintf(errbuf, PCAP_ERRBUF_SIZE, "archaic file format");
 		goto bad;
 	}
 	p->tzoff = hdr.thiszone;
 	p->snapshot = hdr.snaplen;
-	p->linktype = hdr.linktype;
+	p->linktype = linktype_to_dlt(hdr.linktype);
 	p->sf.rfile = fp;
 	p->bufsize = hdr.snaplen;
 
@@ -171,7 +398,13 @@ pcap_open_offline(const char *fname, char *errbuf)
 		break;
 	}
 
+	if (p->bufsize < 0)
+		p->bufsize = BPF_MAXBUFSIZE;
 	p->sf.base = (u_char *)malloc(p->bufsize + BPF_ALIGNMENT);
+	if (p->sf.base == NULL) {
+		strlcpy(errbuf, "out of swap", PCAP_ERRBUF_SIZE);
+		goto bad;
+	}
 	p->buffer = p->sf.base + BPF_ALIGNMENT - (linklen % BPF_ALIGNMENT);
 	p->sf.version_major = hdr.version_major;
 	p->sf.version_minor = hdr.version_minor;
@@ -194,11 +427,17 @@ pcap_open_offline(const char *fname, char *errbuf)
 static int
 sf_next_packet(pcap_t *p, struct pcap_pkthdr *hdr, u_char *buf, int buflen)
 {
-	struct pcap_sf_pkthdr sf_hdr;
+	struct pcap_sf_patched_pkthdr sf_hdr;
 	FILE *fp = p->sf.rfile;
 
-	/* read the stamp */
-	if (fread(&sf_hdr, sizeof(struct pcap_sf_pkthdr), 1, fp) != 1) {
+	/*
+	 * Read the packet header; the structure we use as a buffer
+	 * is the longer structure for files generated by the patched
+	 * libpcap, but if the file has the magic number for an
+	 * unpatched libpcap we only read as many bytes as the regular
+	 * header has.
+	 */
+	if (fread(&sf_hdr, p->sf.hdrsize, 1, fp) != 1) {
 		/* probably an EOF, though could be a truncated packet */
 		return (1);
 	}
@@ -239,9 +478,11 @@ sf_next_packet(pcap_t *p, struct pcap_pkthdr *hdr, u_char *buf, int buflen)
 		static int tsize = 0;
 
 		if (hdr->caplen > 65535) {
-			sprintf(p->errbuf, "bogus savefile header");
+			snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
+			    "bogus savefile header");
 			return (-1);
 		}
+
 		if (tsize < hdr->caplen) {
 			tsize = ((hdr->caplen + 1023) / 1024) * 1024;
 			if (tp != NULL)
@@ -249,12 +490,14 @@ sf_next_packet(pcap_t *p, struct pcap_pkthdr *hdr, u_char *buf, int buflen)
 			tp = (u_char *)malloc(tsize);
 			if (tp == NULL) {
 				tsize = 0;
-				sprintf(p->errbuf, "BUFMOD hack malloc");
+				snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
+				    "BUFMOD hack malloc");
 				return (-1);
 			}
 		}
 		if (fread((char *)tp, hdr->caplen, 1, fp) != 1) {
-			sprintf(p->errbuf, "truncated dump file");
+			snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
+			    "truncated dump file");
 			return (-1);
 		}
 		/*
@@ -271,7 +514,8 @@ sf_next_packet(pcap_t *p, struct pcap_pkthdr *hdr, u_char *buf, int buflen)
 		/* read the packet itself */
 
 		if (fread((char *)buf, hdr->caplen, 1, fp) != 1) {
-			sprintf(p->errbuf, "truncated dump file");
+			snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
+			    "truncated dump file");
 			return (-1);
 		}
 	}
@@ -336,17 +580,27 @@ pcap_dumper_t *
 pcap_dump_open(pcap_t *p, const char *fname)
 {
 	FILE *f;
+	int linktype;
+
+	linktype = dlt_to_linktype(p->linktype);
+	if (linktype == -1) {
+		snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
+		    "%s: link-layer type %d isn't supported in savefiles",
+		    fname, linktype);
+		return (NULL);
+	}
+
 	if (fname[0] == '-' && fname[1] == '\0')
 		f = stdout;
 	else {
 		f = fopen(fname, "w");
 		if (f == NULL) {
-			sprintf(p->errbuf, "%s: %s",
+			snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "%s: %s",
 			    fname, pcap_strerror(errno));
 			return (NULL);
 		}
 	}
-	(void)sf_write_header(f, p->linktype, p->tzoff, p->snapshot);
+	(void)sf_write_header(f, linktype, p->tzoff, p->snapshot);
 	return ((pcap_dumper_t *)f);
 }
 
diff --git a/contrib/libpcap/sll.h b/contrib/libpcap/sll.h
new file mode 100644
index 0000000..4f2330c
--- /dev/null
+++ b/contrib/libpcap/sll.h
@@ -0,0 +1,124 @@
+/*-
+ * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from the Stanford/CMU enet packet filter,
+ * (net/enet.c) distributed as part of 4.3BSD, and code contributed
+ * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence 
+ * Berkeley Laboratory.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *      This product includes software developed by the University of
+ *      California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @(#) $Header: /tcpdump/master/libpcap/sll.h,v 1.6 2000/12/23 07:50:19 guy Exp $ (LBL)
+ */
+
+/*
+ * For captures on Linux cooked sockets, we construct a fake header
+ * that includes:
+ *
+ *	a 2-byte "packet type" which is one of:
+ *
+ *		LINUX_SLL_HOST		packet was sent to us
+ *		LINUX_SLL_BROADCAST	packet was broadcast
+ *		LINUX_SLL_MULTICAST	packet was multicast
+ *		LINUX_SLL_OTHERHOST	packet was sent to somebody else
+ *		LINUX_SLL_OUTGOING	packet was sent *by* us;
+ *
+ *	a 2-byte Ethernet protocol field;
+ *
+ *	a 2-byte link-layer type;
+ *
+ *	a 2-byte link-layer address length;
+ *
+ *	an 8-byte source link-layer address, whose actual length is
+ *	specified by the previous value.
+ *
+ * All fields except for the link-layer address are in network byte order.
+ *
+ * DO NOT change the layout of this structure, or change any of the
+ * LINUX_SLL_ values below.  If you must change the link-layer header
+ * for a "cooked" Linux capture, introduce a new DLT_ type (ask
+ * "tcpdump-workers@tcpdump.org" for one, so that you don't give it a
+ * value that collides with a value already being used), and use the
+ * new header in captures of that type, so that programs that can
+ * handle DLT_LINUX_SLL captures will continue to handle them correctly
+ * without any change, and so that capture files with different headers
+ * can be told apart and programs that read them can dissect the
+ * packets in them.
+ */
+
+/*
+ * A DLT_LINUX_SLL fake link-layer header.
+ */
+#define SLL_HDR_LEN	16		/* total header length */
+#define SLL_ADDRLEN	8		/* length of address field */
+
+struct sll_header {
+	u_int16_t sll_pkttype;		/* packet type */
+	u_int16_t sll_hatype;		/* link-layer address type */
+	u_int16_t sll_halen;		/* link-layer address length */
+	u_int8_t sll_addr[SLL_ADDRLEN];	/* link-layer address */
+	u_int16_t sll_protocol;		/* protocol */
+};
+
+/*
+ * The LINUX_SLL_ values for "sll_pkttype"; these correspond to the
+ * PACKET_ values on Linux, but are defined here so that they're
+ * available even on systems other than Linux, and so that they
+ * don't change even if the PACKET_ values change.
+ */
+#define LINUX_SLL_HOST		0
+#define LINUX_SLL_BROADCAST	1
+#define LINUX_SLL_MULTICAST	2
+#define LINUX_SLL_OTHERHOST	3
+#define LINUX_SLL_OUTGOING	4
+
+/*
+ * The LINUX_SLL_ values for "sll_protocol"; these correspond to the
+ * ETH_P_ values on Linux, but are defined here so that they're
+ * available even on systems other than Linux.  We assume, for now,
+ * that the ETH_P_ values won't change in Linux; if they do, then:
+ *
+ *	if we don't translate them in "pcap-linux.c", capture files
+ *	won't necessarily be readable if captured on a system that
+ *	defines ETH_P_ values that don't match these values;
+ *
+ *	if we do translate them in "pcap-linux.c", that makes life
+ *	unpleasant for the BPF code generator, as the values you test
+ *	for in the kernel aren't the values that you test for when
+ *	reading a capture file, so the fixup code run on BPF programs
+ *	handed to the kernel ends up having to do more work.
+ *
+ * Add other values here as necessary, for handling packet types that
+ * might show up on non-Ethernet, non-802.x networks.  (Not all the ones
+ * in the Linux "if_ether.h" will, I suspect, actually show up in
+ * captures.)
+ */
+#define LINUX_SLL_P_802_3	0x0001	/* Novell 802.3 frames without 802.2 LLC header */
+#define LINUX_SLL_P_802_2	0x0004	/* 802.2 frames (not D/I/X Ethernet) */