Remove files that have been repo copied to their new location

in cddl-specific parts of the source tree.

1 files changed, 0 insertions, 303 deletions

diff --git a/contrib/opensolaris/lib/libzfs/common/libzfs_status.c b/contrib/opensolaris/lib/libzfs/common/libzfs_status.c
deleted file mode 100644
index 3eba97a..0000000
--- a/contrib/opensolaris/lib/libzfs/common/libzfs_status.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * CDDL HEADER START
- *
- * The contents of this file are subject to the terms of the
- * Common Development and Distribution License (the "License").
- * You may not use this file except in compliance with the License.
- *
- * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
- * or http://www.opensolaris.org/os/licensing.
- * See the License for the specific language governing permissions
- * and limitations under the License.
- *
- * When distributing Covered Code, include this CDDL HEADER in each
- * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
- * If applicable, add the following below this CDDL HEADER, with the
- * fields enclosed by brackets "[]" replaced with your own identifying
- * information: Portions Copyright [yyyy] [name of copyright owner]
- *
- * CDDL HEADER END
- */
-/*
- * Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
- * Use is subject to license terms.
- */
-
-#pragma ident	"%Z%%M%	%I%	%E% SMI"
-
-/*
- * This file contains the functions which analyze the status of a pool.  This
- * include both the status of an active pool, as well as the status exported
- * pools.  Returns one of the ZPOOL_STATUS_* defines describing the status of
- * the pool.  This status is independent (to a certain degree) from the state of
- * the pool.  A pool's state descsribes only whether or not it is capable of
- * providing the necessary fault tolerance for data.  The status describes the
- * overall status of devices.  A pool that is online can still have a device
- * that is experiencing errors.
- *
- * Only a subset of the possible faults can be detected using 'zpool status',
- * and not all possible errors correspond to a FMA message ID.  The explanation
- * is left up to the caller, depending on whether it is a live pool or an
- * import.
- */
-
-#include <libzfs.h>
-#include <string.h>
-#include <unistd.h>
-#include "libzfs_impl.h"
-
-/*
- * Message ID table.  This must be kep in sync with the ZPOOL_STATUS_* defines
- * in libzfs.h.  Note that there are some status results which go past the end
- * of this table, and hence have no associated message ID.
- */
-static char *zfs_msgid_table[] = {
-	"ZFS-8000-14",
-	"ZFS-8000-2Q",
-	"ZFS-8000-3C",
-	"ZFS-8000-4J",
-	"ZFS-8000-5E",
-	"ZFS-8000-6X",
-	"ZFS-8000-72",
-	"ZFS-8000-8A",
-	"ZFS-8000-9P",
-	"ZFS-8000-A5",
-	"ZFS-8000-EY"
-};
-
-/*
- * If the pool is active, a certain class of static errors is overridden by the
- * faults as analayzed by FMA.  These faults have separate knowledge articles,
- * and the article referred to by 'zpool status' must match that indicated by
- * the syslog error message.  We override missing data as well as corrupt pool.
- */
-static char *zfs_msgid_table_active[] = {
-	"ZFS-8000-14",
-	"ZFS-8000-D3",		/* overridden */
-	"ZFS-8000-D3",		/* overridden */
-	"ZFS-8000-4J",
-	"ZFS-8000-5E",
-	"ZFS-8000-6X",
-	"ZFS-8000-CS",		/* overridden */
-	"ZFS-8000-8A",
-	"ZFS-8000-9P",
-	"ZFS-8000-CS",		/* overridden */
-};
-
-#define	NMSGID	(sizeof (zfs_msgid_table) / sizeof (zfs_msgid_table[0]))
-
-/* ARGSUSED */
-static int
-vdev_missing(uint64_t state, uint64_t aux, uint64_t errs)
-{
-	return (state == VDEV_STATE_CANT_OPEN &&
-	    aux == VDEV_AUX_OPEN_FAILED);
-}
-
-/* ARGSUSED */
-static int
-vdev_errors(uint64_t state, uint64_t aux, uint64_t errs)
-{
-	return (errs != 0);
-}
-
-/* ARGSUSED */
-static int
-vdev_broken(uint64_t state, uint64_t aux, uint64_t errs)
-{
-	return (state == VDEV_STATE_CANT_OPEN);
-}
-
-/* ARGSUSED */
-static int
-vdev_offlined(uint64_t state, uint64_t aux, uint64_t errs)
-{
-	return (state == VDEV_STATE_OFFLINE);
-}
-
-/*
- * Detect if any leaf devices that have seen errors or could not be opened.
- */
-static boolean_t
-find_vdev_problem(nvlist_t *vdev, int (*func)(uint64_t, uint64_t, uint64_t))
-{
-	nvlist_t **child;
-	vdev_stat_t *vs;
-	uint_t c, children;
-	char *type;
-
-	/*
-	 * Ignore problems within a 'replacing' vdev, since we're presumably in
-	 * the process of repairing any such errors, and don't want to call them
-	 * out again.  We'll pick up the fact that a resilver is happening
-	 * later.
-	 */
-	verify(nvlist_lookup_string(vdev, ZPOOL_CONFIG_TYPE, &type) == 0);
-	if (strcmp(type, VDEV_TYPE_REPLACING) == 0)
-		return (B_FALSE);
-
-	if (nvlist_lookup_nvlist_array(vdev, ZPOOL_CONFIG_CHILDREN, &child,
-	    &children) == 0) {
-		for (c = 0; c < children; c++)
-			if (find_vdev_problem(child[c], func))
-				return (B_TRUE);
-	} else {
-		verify(nvlist_lookup_uint64_array(vdev, ZPOOL_CONFIG_STATS,
-		    (uint64_t **)&vs, &c) == 0);
-
-		if (func(vs->vs_state, vs->vs_aux,
-		    vs->vs_read_errors +
-		    vs->vs_write_errors +
-		    vs->vs_checksum_errors))
-			return (B_TRUE);
-	}
-
-	return (B_FALSE);
-}
-
-/*
- * Active pool health status.
- *
- * To determine the status for a pool, we make several passes over the config,
- * picking the most egregious error we find.  In order of importance, we do the
- * following:
- *
- *	- Check for a complete and valid configuration
- *	- Look for any missing devices in a non-replicated config
- *	- Check for any data errors
- *	- Check for any missing devices in a replicated config
- *	- Look for any devices showing errors
- *	- Check for any resilvering devices
- *
- * There can obviously be multiple errors within a single pool, so this routine
- * only picks the most damaging of all the current errors to report.
- */
-static zpool_status_t
-check_status(nvlist_t *config, boolean_t isimport)
-{
-	nvlist_t *nvroot;
-	vdev_stat_t *vs;
-	uint_t vsc;
-	uint64_t nerr;
-	uint64_t version;
-	uint64_t stateval;
-	uint64_t hostid = 0;
-
-	verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION,
-	    &version) == 0);
-	verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE,
-	    &nvroot) == 0);
-	verify(nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_STATS,
-	    (uint64_t **)&vs, &vsc) == 0);
-	verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_STATE,
-	    &stateval) == 0);
-	(void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_HOSTID, &hostid);
-
-	/*
-	 * Pool last accessed by another system.
-	 */
-	if (hostid != 0 && (unsigned long)hostid != gethostid() &&
-	    stateval == POOL_STATE_ACTIVE)
-		return (ZPOOL_STATUS_HOSTID_MISMATCH);
-
-	/*
-	 * Newer on-disk version.
-	 */
-	if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
-	    vs->vs_aux == VDEV_AUX_VERSION_NEWER)
-		return (ZPOOL_STATUS_VERSION_NEWER);
-
-	/*
-	 * Check that the config is complete.
-	 */
-	if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
-	    vs->vs_aux == VDEV_AUX_BAD_GUID_SUM)
-		return (ZPOOL_STATUS_BAD_GUID_SUM);
-
-	/*
-	 * Missing devices in non-replicated config.
-	 */
-	if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
-	    find_vdev_problem(nvroot, vdev_missing))
-		return (ZPOOL_STATUS_MISSING_DEV_NR);
-
-	if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
-	    find_vdev_problem(nvroot, vdev_broken))
-		return (ZPOOL_STATUS_CORRUPT_LABEL_NR);
-
-	/*
-	 * Corrupted pool metadata
-	 */
-	if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
-	    vs->vs_aux == VDEV_AUX_CORRUPT_DATA)
-		return (ZPOOL_STATUS_CORRUPT_POOL);
-
-	/*
-	 * Persistent data errors.
-	 */
-	if (!isimport) {
-		if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_ERRCOUNT,
-		    &nerr) == 0 && nerr != 0)
-			return (ZPOOL_STATUS_CORRUPT_DATA);
-	}
-
-	/*
-	 * Missing devices in a replicated config.
-	 */
-	if (find_vdev_problem(nvroot, vdev_missing))
-		return (ZPOOL_STATUS_MISSING_DEV_R);
-	if (find_vdev_problem(nvroot, vdev_broken))
-		return (ZPOOL_STATUS_CORRUPT_LABEL_R);
-
-	/*
-	 * Devices with errors
-	 */
-	if (!isimport && find_vdev_problem(nvroot, vdev_errors))
-		return (ZPOOL_STATUS_FAILING_DEV);
-
-	/*
-	 * Offlined devices
-	 */
-	if (find_vdev_problem(nvroot, vdev_offlined))
-		return (ZPOOL_STATUS_OFFLINE_DEV);
-
-	/*
-	 * Currently resilvering
-	 */
-	if (!vs->vs_scrub_complete && vs->vs_scrub_type == POOL_SCRUB_RESILVER)
-		return (ZPOOL_STATUS_RESILVERING);
-
-	/*
-	 * Outdated, but usable, version
-	 */
-	if (version < ZFS_VERSION)
-		return (ZPOOL_STATUS_VERSION_OLDER);
-
-	return (ZPOOL_STATUS_OK);
-}
-
-zpool_status_t
-zpool_get_status(zpool_handle_t *zhp, char **msgid)
-{
-	zpool_status_t ret = check_status(zhp->zpool_config, B_FALSE);
-
-	if (ret >= NMSGID)
-		*msgid = NULL;
-	else
-		*msgid = zfs_msgid_table_active[ret];
-
-	return (ret);
-}
-
-zpool_status_t
-zpool_import_status(nvlist_t *config, char **msgid)
-{
-	zpool_status_t ret = check_status(config, B_TRUE);
-
-	if (ret >= NMSGID)
-		*msgid = NULL;
-	else
-		*msgid = zfs_msgid_table[ret];
-
-	return (ret);
-}