MFC r309124:

Upgrade our copies of clang, llvm, lldb, compiler-rt and libc++ to 3.9.0
release, and add lld 3.9.0.  Also completely revamp the build system for
clang, llvm, lldb and their related tools.

Please note that from 3.5.0 onwards, clang, llvm and lldb require C++11
support to build; see UPDATING for more information.

Release notes for llvm, clang and lld are available here:
<http://llvm.org/releases/3.9.0/docs/ReleaseNotes.html>
<http://llvm.org/releases/3.9.0/tools/clang/docs/ReleaseNotes.html>
<http://llvm.org/releases/3.9.0/tools/lld/docs/ReleaseNotes.html>

Thanks to Ed Maste, Bryan Drewery, Andrew Turner, Antoine Brodin and Jan
Beich for their help.

Relnotes:	yes

MFC r309147:

Pull in r282174 from upstream llvm trunk (by Krzysztof Parzyszek):

  [PPC] Set SP after loading data from stack frame, if no red zone is
  present

  Follow-up to r280705: Make sure that the SP is only restored after
  all data is loaded from the stack frame, if there is no red zone.

  This completes the fix for
  https://llvm.org/bugs/show_bug.cgi?id=26519.

  Differential Revision: https://reviews.llvm.org/D24466

Reported by:    Mark Millard
PR:             214433

MFC r309149:

Pull in r283060 from upstream llvm trunk (by Hal Finkel):

  [PowerPC] Refactor soft-float support, and enable PPC64 soft float

  This change enables soft-float for PowerPC64, and also makes
  soft-float disable all vector instruction sets for both 32-bit and
  64-bit modes. This latter part is necessary because the PPC backend
  canonicalizes many Altivec vector types to floating-point types, and
  so soft-float breaks scalarization support for many operations. Both
  for embedded targets and for operating-system kernels desiring
  soft-float support, it seems reasonable that disabling hardware
  floating-point also disables vector instructions (embedded targets
  without hardware floating point support are unlikely to have Altivec,
  etc. and operating system kernels desiring not to use floating-point
  registers to lower syscall cost are unlikely to want to use vector
  registers either). If someone needs this to work, we'll need to
  change the fact that we promote many Altivec operations to act on
  v4f32. To make it possible to disable Altivec when soft-float is
  enabled, hardware floating-point support needs to be expressed as a
  positive feature, like the others, and not a negative feature,
  because target features cannot have dependencies on the disabling of
  some other feature. So +soft-float has now become -hard-float.

  Fixes PR26970.

Pull in r283061 from upstream clang trunk (by Hal Finkel):

  [PowerPC] Enable soft-float for PPC64, and +soft-float -> -hard-float

  Enable soft-float support on PPC64, as the backend now supports it.
  Also, the backend now uses -hard-float instead of +soft-float, so set
  the target features accordingly.

  Fixes PR26970.

Reported by:	Mark Millard
PR:		214433

MFC r309212:

Add a few missed clang 3.9.0 files to OptionalObsoleteFiles.

MFC r309262:

Fix packaging for clang, lldb and lld 3.9.0

During the upgrade of clang/llvm etc to 3.9.0 in r309124, the PACKAGE
directive in the usr.bin/clang/*.mk files got dropped accidentally.

Restore it, with a few minor changes and additions:
* Correct license in clang.ucl to NCSA
* Add PACKAGE=clang for clang and most of the "ll" tools
* Put lldb in its own package
* Put lld in its own package

Reviewed by:	gjb, jmallett
Differential Revision: https://reviews.freebsd.org/D8666

MFC r309656:

During the bootstrap phase, when building the minimal llvm library on
PowerPC, add lib/Support/Atomic.cpp.  This is needed because upstream
llvm revision r271821 disabled the use of std::call_once, which causes
some fallback functions from Atomic.cpp to be used instead.

Reported by:	Mark Millard
PR:		214902

MFC r309835:

Tentatively apply https://reviews.llvm.org/D18730 to work around gcc PR
70528 (bogus error: constructor required before non-static data member).
This should fix buildworld with the external gcc package.

Reported by:	https://jenkins.freebsd.org/job/FreeBSD_HEAD_amd64_gcc/

MFC r310194:

Upgrade our copies of clang, llvm, lld, lldb, compiler-rt and libc++ to
3.9.1 release.

Please note that from 3.5.0 onwards, clang, llvm and lldb require C++11
support to build; see UPDATING for more information.

Release notes for llvm, clang and lld will be available here:
<http://releases.llvm.org/3.9.1/docs/ReleaseNotes.html>
<http://releases.llvm.org/3.9.1/tools/clang/docs/ReleaseNotes.html>
<http://releases.llvm.org/3.9.1/tools/lld/docs/ReleaseNotes.html>

Relnotes:	yes

1 files changed, 0 insertions, 411 deletions

diff --git a/contrib/llvm/lib/CodeGen/AsmPrinter/WinCodeViewLineTables.cpp b/contrib/llvm/lib/CodeGen/AsmPrinter/WinCodeViewLineTables.cpp
deleted file mode 100644
index 1e2f55b..0000000
--- a/contrib/llvm/lib/CodeGen/AsmPrinter/WinCodeViewLineTables.cpp
+++ /dev/null
@@ -1,411 +0,0 @@
-//===-- llvm/lib/CodeGen/AsmPrinter/WinCodeViewLineTables.cpp --*- C++ -*--===//
-//
-//                     The LLVM Compiler Infrastructure
-//
-// This file is distributed under the University of Illinois Open Source
-// License. See LICENSE.TXT for details.
-//
-//===----------------------------------------------------------------------===//
-//
-// This file contains support for writing line tables info into COFF files.
-//
-//===----------------------------------------------------------------------===//
-
-#include "WinCodeViewLineTables.h"
-#include "llvm/MC/MCExpr.h"
-#include "llvm/MC/MCSymbol.h"
-#include "llvm/Support/COFF.h"
-
-namespace llvm {
-
-StringRef WinCodeViewLineTables::getFullFilepath(const MDNode *S) {
-  assert(S);
-  assert((isa<DICompileUnit>(S) || isa<DIFile>(S) || isa<DISubprogram>(S) ||
-          isa<DILexicalBlockBase>(S)) &&
-         "Unexpected scope info");
-
-  auto *Scope = cast<DIScope>(S);
-  StringRef Dir = Scope->getDirectory(),
-            Filename = Scope->getFilename();
-  std::string &Filepath =
-      DirAndFilenameToFilepathMap[std::make_pair(Dir, Filename)];
-  if (!Filepath.empty())
-    return Filepath;
-
-  // Clang emits directory and relative filename info into the IR, but CodeView
-  // operates on full paths.  We could change Clang to emit full paths too, but
-  // that would increase the IR size and probably not needed for other users.
-  // For now, just concatenate and canonicalize the path here.
-  if (Filename.find(':') == 1)
-    Filepath = Filename;
-  else
-    Filepath = (Dir + "\\" + Filename).str();
-
-  // Canonicalize the path.  We have to do it textually because we may no longer
-  // have access the file in the filesystem.
-  // First, replace all slashes with backslashes.
-  std::replace(Filepath.begin(), Filepath.end(), '/', '\\');
-
-  // Remove all "\.\" with "\".
-  size_t Cursor = 0;
-  while ((Cursor = Filepath.find("\\.\\", Cursor)) != std::string::npos)
-    Filepath.erase(Cursor, 2);
-
-  // Replace all "\XXX\..\" with "\".  Don't try too hard though as the original
-  // path should be well-formatted, e.g. start with a drive letter, etc.
-  Cursor = 0;
-  while ((Cursor = Filepath.find("\\..\\", Cursor)) != std::string::npos) {
-    // Something's wrong if the path starts with "\..\", abort.
-    if (Cursor == 0)
-      break;
-
-    size_t PrevSlash = Filepath.rfind('\\', Cursor - 1);
-    if (PrevSlash == std::string::npos)
-      // Something's wrong, abort.
-      break;
-
-    Filepath.erase(PrevSlash, Cursor + 3 - PrevSlash);
-    // The next ".." might be following the one we've just erased.
-    Cursor = PrevSlash;
-  }
-
-  // Remove all duplicate backslashes.
-  Cursor = 0;
-  while ((Cursor = Filepath.find("\\\\", Cursor)) != std::string::npos)
-    Filepath.erase(Cursor, 1);
-
-  return Filepath;
-}
-
-void WinCodeViewLineTables::maybeRecordLocation(DebugLoc DL,
-                                                const MachineFunction *MF) {
-  const MDNode *Scope = DL.getScope();
-  if (!Scope)
-    return;
-  unsigned LineNumber = DL.getLine();
-  // Skip this line if it is longer than the maximum we can record.
-  if (LineNumber > COFF::CVL_MaxLineNumber)
-    return;
-
-  unsigned ColumnNumber = DL.getCol();
-  // Truncate the column number if it is longer than the maximum we can record.
-  if (ColumnNumber > COFF::CVL_MaxColumnNumber)
-    ColumnNumber = 0;
-
-  StringRef Filename = getFullFilepath(Scope);
-
-  // Skip this instruction if it has the same file:line as the previous one.
-  assert(CurFn);
-  if (!CurFn->Instrs.empty()) {
-    const InstrInfoTy &LastInstr = InstrInfo[CurFn->Instrs.back()];
-    if (LastInstr.Filename == Filename && LastInstr.LineNumber == LineNumber &&
-        LastInstr.ColumnNumber == ColumnNumber)
-      return;
-  }
-  FileNameRegistry.add(Filename);
-
-  MCSymbol *MCL = Asm->MMI->getContext().createTempSymbol();
-  Asm->OutStreamer->EmitLabel(MCL);
-  CurFn->Instrs.push_back(MCL);
-  InstrInfo[MCL] = InstrInfoTy(Filename, LineNumber, ColumnNumber);
-}
-
-WinCodeViewLineTables::WinCodeViewLineTables(AsmPrinter *AP)
-    : Asm(nullptr), CurFn(nullptr) {
-  MachineModuleInfo *MMI = AP->MMI;
-
-  // If module doesn't have named metadata anchors or COFF debug section
-  // is not available, skip any debug info related stuff.
-  if (!MMI->getModule()->getNamedMetadata("llvm.dbg.cu") ||
-      !AP->getObjFileLowering().getCOFFDebugSymbolsSection())
-    return;
-
-  // Tell MMI that we have debug info.
-  MMI->setDebugInfoAvailability(true);
-  Asm = AP;
-}
-
-void WinCodeViewLineTables::endModule() {
-  if (FnDebugInfo.empty())
-    return;
-
-  assert(Asm != nullptr);
-  Asm->OutStreamer->SwitchSection(
-      Asm->getObjFileLowering().getCOFFDebugSymbolsSection());
-  Asm->EmitInt32(COFF::DEBUG_SECTION_MAGIC);
-
-  // The COFF .debug$S section consists of several subsections, each starting
-  // with a 4-byte control code (e.g. 0xF1, 0xF2, etc) and then a 4-byte length
-  // of the payload followed by the payload itself.  The subsections are 4-byte
-  // aligned.
-
-  // Emit per-function debug information.  This code is extracted into a
-  // separate function for readability.
-  for (size_t I = 0, E = VisitedFunctions.size(); I != E; ++I)
-    emitDebugInfoForFunction(VisitedFunctions[I]);
-
-  // This subsection holds a file index to offset in string table table.
-  Asm->OutStreamer->AddComment("File index to string table offset subsection");
-  Asm->EmitInt32(COFF::DEBUG_INDEX_SUBSECTION);
-  size_t NumFilenames = FileNameRegistry.Infos.size();
-  Asm->EmitInt32(8 * NumFilenames);
-  for (size_t I = 0, E = FileNameRegistry.Filenames.size(); I != E; ++I) {
-    StringRef Filename = FileNameRegistry.Filenames[I];
-    // For each unique filename, just write its offset in the string table.
-    Asm->EmitInt32(FileNameRegistry.Infos[Filename].StartOffset);
-    // The function name offset is not followed by any additional data.
-    Asm->EmitInt32(0);
-  }
-
-  // This subsection holds the string table.
-  Asm->OutStreamer->AddComment("String table");
-  Asm->EmitInt32(COFF::DEBUG_STRING_TABLE_SUBSECTION);
-  Asm->EmitInt32(FileNameRegistry.LastOffset);
-  // The payload starts with a null character.
-  Asm->EmitInt8(0);
-
-  for (size_t I = 0, E = FileNameRegistry.Filenames.size(); I != E; ++I) {
-    // Just emit unique filenames one by one, separated by a null character.
-    Asm->OutStreamer->EmitBytes(FileNameRegistry.Filenames[I]);
-    Asm->EmitInt8(0);
-  }
-
-  // No more subsections. Fill with zeros to align the end of the section by 4.
-  Asm->OutStreamer->EmitFill((-FileNameRegistry.LastOffset) % 4, 0);
-
-  clear();
-}
-
-static void EmitLabelDiff(MCStreamer &Streamer,
-                          const MCSymbol *From, const MCSymbol *To,
-                          unsigned int Size = 4) {
-  MCSymbolRefExpr::VariantKind Variant = MCSymbolRefExpr::VK_None;
-  MCContext &Context = Streamer.getContext();
-  const MCExpr *FromRef = MCSymbolRefExpr::create(From, Variant, Context),
-               *ToRef   = MCSymbolRefExpr::create(To, Variant, Context);
-  const MCExpr *AddrDelta =
-      MCBinaryExpr::create(MCBinaryExpr::Sub, ToRef, FromRef, Context);
-  Streamer.EmitValue(AddrDelta, Size);
-}
-
-void WinCodeViewLineTables::emitDebugInfoForFunction(const Function *GV) {
-  // For each function there is a separate subsection
-  // which holds the PC to file:line table.
-  const MCSymbol *Fn = Asm->getSymbol(GV);
-  assert(Fn);
-
-  const FunctionInfo &FI = FnDebugInfo[GV];
-  if (FI.Instrs.empty())
-    return;
-  assert(FI.End && "Don't know where the function ends?");
-
-  StringRef GVName = GV->getName();
-  StringRef FuncName;
-  if (auto *SP = getDISubprogram(GV))
-    FuncName = SP->getDisplayName();
-
-  // FIXME Clang currently sets DisplayName to "bar" for a C++
-  // "namespace_foo::bar" function, see PR21528.  Luckily, dbghelp.dll is trying
-  // to demangle display names anyways, so let's just put a mangled name into
-  // the symbols subsection until Clang gives us what we need.
-  if (GVName.startswith("\01?"))
-    FuncName = GVName.substr(1);
-  // Emit a symbol subsection, required by VS2012+ to find function boundaries.
-  MCSymbol *SymbolsBegin = Asm->MMI->getContext().createTempSymbol(),
-           *SymbolsEnd = Asm->MMI->getContext().createTempSymbol();
-  Asm->OutStreamer->AddComment("Symbol subsection for " + Twine(FuncName));
-  Asm->EmitInt32(COFF::DEBUG_SYMBOL_SUBSECTION);
-  EmitLabelDiff(*Asm->OutStreamer, SymbolsBegin, SymbolsEnd);
-  Asm->OutStreamer->EmitLabel(SymbolsBegin);
-  {
-    MCSymbol *ProcSegmentBegin = Asm->MMI->getContext().createTempSymbol(),
-             *ProcSegmentEnd = Asm->MMI->getContext().createTempSymbol();
-    EmitLabelDiff(*Asm->OutStreamer, ProcSegmentBegin, ProcSegmentEnd, 2);
-    Asm->OutStreamer->EmitLabel(ProcSegmentBegin);
-
-    Asm->EmitInt16(COFF::DEBUG_SYMBOL_TYPE_PROC_START);
-    // Some bytes of this segment don't seem to be required for basic debugging,
-    // so just fill them with zeroes.
-    Asm->OutStreamer->EmitFill(12, 0);
-    // This is the important bit that tells the debugger where the function
-    // code is located and what's its size:
-    EmitLabelDiff(*Asm->OutStreamer, Fn, FI.End);
-    Asm->OutStreamer->EmitFill(12, 0);
-    Asm->OutStreamer->EmitCOFFSecRel32(Fn);
-    Asm->OutStreamer->EmitCOFFSectionIndex(Fn);
-    Asm->EmitInt8(0);
-    // Emit the function display name as a null-terminated string.
-    Asm->OutStreamer->EmitBytes(FuncName);
-    Asm->EmitInt8(0);
-    Asm->OutStreamer->EmitLabel(ProcSegmentEnd);
-
-    // We're done with this function.
-    Asm->EmitInt16(0x0002);
-    Asm->EmitInt16(COFF::DEBUG_SYMBOL_TYPE_PROC_END);
-  }
-  Asm->OutStreamer->EmitLabel(SymbolsEnd);
-  // Every subsection must be aligned to a 4-byte boundary.
-  Asm->OutStreamer->EmitFill((-FuncName.size()) % 4, 0);
-
-  // PCs/Instructions are grouped into segments sharing the same filename.
-  // Pre-calculate the lengths (in instructions) of these segments and store
-  // them in a map for convenience.  Each index in the map is the sequential
-  // number of the respective instruction that starts a new segment.
-  DenseMap<size_t, size_t> FilenameSegmentLengths;
-  size_t LastSegmentEnd = 0;
-  StringRef PrevFilename = InstrInfo[FI.Instrs[0]].Filename;
-  for (size_t J = 1, F = FI.Instrs.size(); J != F; ++J) {
-    if (PrevFilename == InstrInfo[FI.Instrs[J]].Filename)
-      continue;
-    FilenameSegmentLengths[LastSegmentEnd] = J - LastSegmentEnd;
-    LastSegmentEnd = J;
-    PrevFilename = InstrInfo[FI.Instrs[J]].Filename;
-  }
-  FilenameSegmentLengths[LastSegmentEnd] = FI.Instrs.size() - LastSegmentEnd;
-
-  // Emit a line table subsection, required to do PC-to-file:line lookup.
-  Asm->OutStreamer->AddComment("Line table subsection for " + Twine(FuncName));
-  Asm->EmitInt32(COFF::DEBUG_LINE_TABLE_SUBSECTION);
-  MCSymbol *LineTableBegin = Asm->MMI->getContext().createTempSymbol(),
-           *LineTableEnd = Asm->MMI->getContext().createTempSymbol();
-  EmitLabelDiff(*Asm->OutStreamer, LineTableBegin, LineTableEnd);
-  Asm->OutStreamer->EmitLabel(LineTableBegin);
-
-  // Identify the function this subsection is for.
-  Asm->OutStreamer->EmitCOFFSecRel32(Fn);
-  Asm->OutStreamer->EmitCOFFSectionIndex(Fn);
-  // Insert flags after a 16-bit section index.
-  Asm->EmitInt16(COFF::DEBUG_LINE_TABLES_HAVE_COLUMN_RECORDS);
-
-  // Length of the function's code, in bytes.
-  EmitLabelDiff(*Asm->OutStreamer, Fn, FI.End);
-
-  // PC-to-linenumber lookup table:
-  MCSymbol *FileSegmentEnd = nullptr;
-
-  // The start of the last segment:
-  size_t LastSegmentStart = 0;
-
-  auto FinishPreviousChunk = [&] {
-    if (!FileSegmentEnd)
-      return;
-    for (size_t ColSegI = LastSegmentStart,
-                ColSegEnd = ColSegI + FilenameSegmentLengths[LastSegmentStart];
-         ColSegI != ColSegEnd; ++ColSegI) {
-      unsigned ColumnNumber = InstrInfo[FI.Instrs[ColSegI]].ColumnNumber;
-      assert(ColumnNumber <= COFF::CVL_MaxColumnNumber);
-      Asm->EmitInt16(ColumnNumber); // Start column
-      Asm->EmitInt16(0);            // End column
-    }
-    Asm->OutStreamer->EmitLabel(FileSegmentEnd);
-  };
-
-  for (size_t J = 0, F = FI.Instrs.size(); J != F; ++J) {
-    MCSymbol *Instr = FI.Instrs[J];
-    assert(InstrInfo.count(Instr));
-
-    if (FilenameSegmentLengths.count(J)) {
-      // We came to a beginning of a new filename segment.
-      FinishPreviousChunk();
-      StringRef CurFilename = InstrInfo[FI.Instrs[J]].Filename;
-      assert(FileNameRegistry.Infos.count(CurFilename));
-      size_t IndexInStringTable =
-          FileNameRegistry.Infos[CurFilename].FilenameID;
-      // Each segment starts with the offset of the filename
-      // in the string table.
-      Asm->OutStreamer->AddComment(
-          "Segment for file '" + Twine(CurFilename) + "' begins");
-      MCSymbol *FileSegmentBegin = Asm->MMI->getContext().createTempSymbol();
-      Asm->OutStreamer->EmitLabel(FileSegmentBegin);
-      Asm->EmitInt32(8 * IndexInStringTable);
-
-      // Number of PC records in the lookup table.
-      size_t SegmentLength = FilenameSegmentLengths[J];
-      Asm->EmitInt32(SegmentLength);
-
-      // Full size of the segment for this filename, including the prev two
-      // records.
-      FileSegmentEnd = Asm->MMI->getContext().createTempSymbol();
-      EmitLabelDiff(*Asm->OutStreamer, FileSegmentBegin, FileSegmentEnd);
-      LastSegmentStart = J;
-    }
-
-    // The first PC with the given linenumber and the linenumber itself.
-    EmitLabelDiff(*Asm->OutStreamer, Fn, Instr);
-    uint32_t LineNumber = InstrInfo[Instr].LineNumber;
-    assert(LineNumber <= COFF::CVL_MaxLineNumber);
-    uint32_t LineData = LineNumber | COFF::CVL_IsStatement;
-    Asm->EmitInt32(LineData);
-  }
-
-  FinishPreviousChunk();
-  Asm->OutStreamer->EmitLabel(LineTableEnd);
-}
-
-void WinCodeViewLineTables::beginFunction(const MachineFunction *MF) {
-  assert(!CurFn && "Can't process two functions at once!");
-
-  if (!Asm || !Asm->MMI->hasDebugInfo())
-    return;
-
-  const Function *GV = MF->getFunction();
-  assert(FnDebugInfo.count(GV) == false);
-  VisitedFunctions.push_back(GV);
-  CurFn = &FnDebugInfo[GV];
-
-  // Find the end of the function prolog.
-  // FIXME: is there a simpler a way to do this? Can we just search
-  // for the first instruction of the function, not the last of the prolog?
-  DebugLoc PrologEndLoc;
-  bool EmptyPrologue = true;
-  for (const auto &MBB : *MF) {
-    if (PrologEndLoc)
-      break;
-    for (const auto &MI : MBB) {
-      if (MI.isDebugValue())
-        continue;
-
-      // First known non-DBG_VALUE and non-frame setup location marks
-      // the beginning of the function body.
-      // FIXME: do we need the first subcondition?
-      if (!MI.getFlag(MachineInstr::FrameSetup) && MI.getDebugLoc()) {
-        PrologEndLoc = MI.getDebugLoc();
-        break;
-      }
-      EmptyPrologue = false;
-    }
-  }
-  // Record beginning of function if we have a non-empty prologue.
-  if (PrologEndLoc && !EmptyPrologue) {
-    DebugLoc FnStartDL = PrologEndLoc.getFnDebugLoc();
-    maybeRecordLocation(FnStartDL, MF);
-  }
-}
-
-void WinCodeViewLineTables::endFunction(const MachineFunction *MF) {
-  if (!Asm || !CurFn)  // We haven't created any debug info for this function.
-    return;
-
-  const Function *GV = MF->getFunction();
-  assert(FnDebugInfo.count(GV));
-  assert(CurFn == &FnDebugInfo[GV]);
-
-  if (CurFn->Instrs.empty()) {
-    FnDebugInfo.erase(GV);
-    VisitedFunctions.pop_back();
-  } else {
-    CurFn->End = Asm->getFunctionEnd();
-  }
-  CurFn = nullptr;
-}
-
-void WinCodeViewLineTables::beginInstruction(const MachineInstr *MI) {
-  // Ignore DBG_VALUE locations and function prologue.
-  if (!Asm || MI->isDebugValue() || MI->getFlag(MachineInstr::FrameSetup))
-    return;
-  DebugLoc DL = MI->getDebugLoc();
-  if (DL == PrevInstLoc || !DL)
-    return;
-  maybeRecordLocation(DL, Asm->MF);
-}
-}