Gcc 3.3.1-pre 2003-07-11 C++ support bits.

1 files changed, 26 insertions, 29 deletions

diff --git a/contrib/libstdc++/Makefile.in b/contrib/libstdc++/Makefile.in
index add19e9..4ff8e32 100644
--- a/contrib/libstdc++/Makefile.in
+++ b/contrib/libstdc++/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
 
 # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
@@ -67,15 +67,24 @@ AR = @AR@
 AS = @AS@
 ATOMICITY_INC_SRCDIR = @ATOMICITY_INC_SRCDIR@
 AWK = @AWK@
+BASIC_FILE_CC = @BASIC_FILE_CC@
 BASIC_FILE_H = @BASIC_FILE_H@
 CC = @CC@
 CCODECVT_C = @CCODECVT_C@
+CCODECVT_CC = @CCODECVT_CC@
 CCODECVT_H = @CCODECVT_H@
+CCOLLATE_CC = @CCOLLATE_CC@
+CCTYPE_CC = @CCTYPE_CC@
+CLOCALE_CC = @CLOCALE_CC@
 CLOCALE_H = @CLOCALE_H@
+CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@
+CMESSAGES_CC = @CMESSAGES_CC@
 CMESSAGES_H = @CMESSAGES_H@
+CMONEY_CC = @CMONEY_CC@
+CNUMERIC_CC = @CNUMERIC_CC@
 CPP = @CPP@
-CPU_LIMITS_INC_SRCDIR = @CPU_LIMITS_INC_SRCDIR@
 CSTDIO_H = @CSTDIO_H@
+CTIME_CC = @CTIME_CC@
 CTIME_H = @CTIME_H@
 CXX = @CXX@
 CXXCPP = @CXXCPP@
@@ -108,11 +117,13 @@ RANLIB = @RANLIB@
 SECTION_FLAGS = @SECTION_FLAGS@
 SECTION_LDFLAGS = @SECTION_LDFLAGS@
 STRIP = @STRIP@
+SYMVER_MAP = @SYMVER_MAP@
 TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@
 USE_NLS = @USE_NLS@
 VERSION = @VERSION@
 WARN_FLAGS = @WARN_FLAGS@
 WERROR = @WERROR@
+baseline_dir = @baseline_dir@
 check_msgfmt = @check_msgfmt@
 enable_shared = @enable_shared@
 enable_static = @enable_static@
@@ -140,9 +151,7 @@ SUBDIRS = include libio libmath libsupc++ src po testsuite
 
 mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs
 
-# Use 'new-abi-baseline' to create an initial symbol file.  Then run
-# 'check-abi' to test for changes against that file.
-baseline_file = @baseline_file@
+PWD_COMMAND = $${PWDCMD-pwd}
 
 # Multilib support.
 MAKEOVERRIDES = 
@@ -185,6 +194,7 @@ AM_MAKEFLAGS = \
 	"includedir=$(includedir)" \
 	"prefix=$(prefix)" \
 	"tooldir=$(tooldir)" \
+	"gxx_include_dir=$(gxx_include_dir)" \
 	"AR=$(AR)" \
 	"AS=$(AS)" \
 	"LD=$(LD)" \
@@ -197,6 +207,9 @@ AM_MAKEFLAGS = \
 	"DESTDIR=$(DESTDIR)" \
 	"WERROR=$(WERROR)" 
 
+
+# Subdir rules rely on $(FLAGS_TO_PASS)
+FLAGS_TO_PASS = $(AM_MAKEFLAGS)
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES =  mkcheck testsuite_flags
@@ -270,7 +283,7 @@ testsuite_flags: $(top_builddir)/config.status testsuite_flags.in
 all-recursive install-data-recursive install-exec-recursive \
 installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
 check-recursive installcheck-recursive info-recursive dvi-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
+	@set fnord $$MAKEFLAGS; amf=$$2; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
@@ -290,7 +303,7 @@ check-recursive installcheck-recursive info-recursive dvi-recursive:
 
 mostlyclean-recursive clean-recursive distclean-recursive \
 maintainer-clean-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
+	@set fnord $$MAKEFLAGS; amf=$$2; \
 	dot_seen=no; \
 	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
 	  rev="$$subdir $$rev"; \
@@ -482,39 +495,23 @@ check-script-install: $(top_builddir)/mkcheck
 	-(chmod + $(top_builddir)/mkcheck; \
 	  cd testsuite; \
 	  @glibcpp_builddir@/mkcheck 1)
-check-abi: $(top_builddir)/testsuite/abi_check
-	-@(cd testsuite; \
-	  @glibcpp_srcdir@/config/abi/extract_symvers \
-	     ../src/.libs/libstdc++.so \
-	     ./current_symbols.txt; \
-	  ./abi_check --check ./current_symbols.txt ${baseline_file})
-
-new-abi-baseline:
-	-@(output=${baseline_file}; \
-	  if test -f $${output}; then \
-	    output=$${output}.new; \
-	    t=`echo $${output} | sed 's=.*config/abi/=='`; \
-	    echo "Baseline file already exists, writing to $${t} instead."; \
-	  fi; \
-	  @glibcpp_srcdir@/config/abi/extract_symvers \
-	     src/.libs/libstdc++.so $${output})
 
 # These rules are messy, but are hella worth it.
 doxygen:
-	-(srcdir=`cd ${top_srcdir}; pwd`; \
-	  builddir=`pwd`; \
+	-(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
+	  builddir=`${PWD_COMMAND}`; \
 	  /bin/sh ${srcdir}/docs/doxygen/run_doxygen \
 	            --mode=user $${srcdir} $${builddir})
 
 doxygen-maint:
-	-(srcdir=`cd ${top_srcdir}; pwd`; \
-	  builddir=`pwd`; \
+	-(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
+	  builddir=`${PWD_COMMAND}`; \
 	  /bin/sh ${srcdir}/docs/doxygen/run_doxygen \
 	            --mode=maint $${srcdir} $${builddir})
 
 doxygen-man:
-	-(srcdir=`cd ${top_srcdir}; pwd`; \
-	  builddir=`pwd`; \
+	-(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
+	  builddir=`${PWD_COMMAND}`; \
 	  /bin/sh ${srcdir}/docs/doxygen/run_doxygen \
 	            --mode=man $${srcdir} $${builddir})