As per the developers handbook (5.3.1 step 1), prepare the vendor trees for

import of new ipfilter vendor sources by flattening them.

To keep the tags consistent with dist, the tags are also flattened.

Approved by:	glebius (Mentor)

1 files changed, 0 insertions, 101 deletions

diff --git a/contrib/ipfilter/ipsend/iptest.1 b/contrib/ipfilter/ipsend/iptest.1
deleted file mode 100644
index ca74094..0000000
--- a/contrib/ipfilter/ipsend/iptest.1
+++ /dev/null
@@ -1,101 +0,0 @@
-.TH IPTEST 1
-.SH NAME
-iptest \- automatically generate a packets to test IP functionality
-.SH SYNOPSIS
-.B iptest
-[
-.B \-1234567
-] [
-.B \-d
-<device>
-] [
-.B \-g
-<gateway>
-] [
-.B \-m
-<\fIMTU\fP>
-] [
-.B \-p
-<\fIpointtest\fP>
-] [
-.B \-s
-<\fIsource\fP>
-] <destination>
-.SH DESCRIPTION
-.PP
-\fBiptest\fP ...
-.SH OPTIONS
-.TP
-.B \-1
-Run IP test group #1.  This group of tests generates packets with the IP
-header fields set to invalid values given other packet characteristics.
-The point tests are: 1 (ip_hl < ip_len), 2 (ip_hl > ip_len),
-3 (ip_v < 4), 4 (ip_v > 4), 5 (ip_len < packetsize, long packets),
-6 (ip_len > packet size, short packets), 7 (Zero length fragments),
-8 (packet > 64k after reassembly), 9 (IP offset with MSB set), 10 (ttl
-variations).
-.TP
-.B \-2
-Run IP test group #2.  This group of tests generates packets with the IP
-options constructed with invalid values given other packet characteristics.
-The point tests are: 1 (option length > packet length), 2 (option length = 0).
-.TP
-.B \-3
-Run IP test group #3.  This group of tests generates packets with the ICMP
-header fields set to non-standard values.  The point tests are: 1 (ICMP types
-0-31 & 255), 2 (type 3 & code 0 - 31), 3 (type 4 & code 0, 127, 128, 255),
-4 (type 5 & code 0, 127, 128, 255), 5 (types 8-10,13-18 with codes 0, 127,
-128 and 255), 6 (type 12 & code 0, 127, 128, 129, 255) and 7 (type 3 & codes
-9-10, 13-14 and 17-18 - shortened packets).
-.TP
-.B \-4
-Run IP test group #4.  This group of tests generates packets with the UDP
-header fields set to non-standard values.  The point tests are: 1 (UDP length
-> packet size), 2 (UDP length < packetsize), 3 (sport = 0, 1, 32767, 32768,
-65535), 4 (dport = 0, 1, 32767, 32768, 65535) and 5 (sizeof(struct ip) <= MTU
-<= sizeof(struct udphdr) + sizeof(struct ip)).
-.TP
-.B \-5
-Run IP test group #5.  This group of tests generates packets with the TCP
-header fields set to non-standard values.  The point tests are: 1 (TCP flags
-variations, all combinations), 2 (seq = 0, 0x7fffffff, 0x8000000, 0xa0000000,
-0xffffffff),  3 (ack = 0, 0x7fffffff, 0x8000000, 0xa0000000, 0xffffffff),
-4 (SYN packet with window of 0, 32768, 65535), 5 (set urgent pointer to 1,
-0x7fff, 0x8000, 0xffff), 6 (data offset), 7 (sport = 0, 1, 32767, 32768,
-65535) and 8 (dport = 0, 1, 32767, 32768, 65535).
-.TP
-.B \-6
-Run IP test group #6.  This test generates a large number of fragments in
-an attempt to exhaust the network buffers used for holding packets for later
-reassembly.  WARNING: this may crash or cause serious performance degradation
-to the target host.
-.TP
-.B \-7
-Run IP test group #7.  This test generates 1024 random IP packets with only
-the IP version, checksum, length and IP offset field correct.
-.TP
-.BR \-d \0<interface>
-Set the interface name to be the name supplied.
-.TP
-.BR \-g \0<gateway>
-Specify the hostname of the gateway through which to route packets.  This
-is required whenever the destination host isn't directly attached to the
-same network as the host from which you're sending.
-.TP
-.BR \-m \0<MTU>
-Specify the MTU to be used when sending out packets.  This option allows you
-to set a fake MTU, allowing the simulation of network interfaces with small
-MTU's without setting them so.
-.TP
-.B \-p <test>
-Run a...
-.DT
-.SH SEE ALSO
-ipsend(1), ipresend(1), bpf(4), ipsend(5), dlpi(7p)
-.SH DIAGNOSTICS
-Only one of the numeric test options may be given when \fIiptest\fP is run.
-.PP
-Needs to be run as root.
-.SH BUGS
-.PP
-If you find any, please send email to me at darrenr@pobox.com