As per the developers handbook (5.3.1 step 1), prepare the vendor trees for

import of new ipfilter vendor sources by flattening them.

To keep the tags consistent with dist, the tags are also flattened.

Approved by:	glebius (Mentor)

1 files changed, 0 insertions, 450 deletions

diff --git a/contrib/ipfilter/bpf.h b/contrib/ipfilter/bpf.h
deleted file mode 100644
index 715c79a..0000000
--- a/contrib/ipfilter/bpf.h
+++ /dev/null
@@ -1,450 +0,0 @@
-/*-
- * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from the Stanford/CMU enet packet filter,
- * (net/enet.c) distributed as part of 4.3BSD, and code contributed
- * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence 
- * Berkeley Laboratory.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by the University of
- *      California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *      @(#)bpf.h       7.1 (Berkeley) 5/7/91
- *
- * @(#) $Header: /devel/CVS/IP-Filter/Attic/bpf.h,v 1.1.2.1 2002/11/07 13:18:35 darrenr Exp $ (LBL)
- */
-
-#ifndef BPF_MAJOR_VERSION
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* BSD style release date */
-#define BPF_RELEASE 199606
-
-typedef	int bpf_int32;
-typedef	u_int bpf_u_int32;
-
-/*
- * Alignment macros.  BPF_WORDALIGN rounds up to the next 
- * even multiple of BPF_ALIGNMENT. 
- */
-#ifndef __NetBSD__
-#define BPF_ALIGNMENT sizeof(bpf_int32)
-#else
-#define BPF_ALIGNMENT sizeof(long)
-#endif
-#define BPF_WORDALIGN(x) (((x)+(BPF_ALIGNMENT-1))&~(BPF_ALIGNMENT-1))
-
-#define BPF_MAXINSNS 512
-#define BPF_MAXBUFSIZE 0x8000
-#define BPF_MINBUFSIZE 32
-
-/*
- *  Structure for BIOCSETF.
- */
-struct bpf_program {
-	u_int bf_len;
-	struct bpf_insn *bf_insns;
-};
- 
-/*
- * Struct returned by BIOCGSTATS.
- */
-struct bpf_stat {
-	u_int bs_recv;		/* number of packets received */
-	u_int bs_drop;		/* number of packets dropped */
-};
-
-/*
- * Struct return by BIOCVERSION.  This represents the version number of 
- * the filter language described by the instruction encodings below.
- * bpf understands a program iff kernel_major == filter_major &&
- * kernel_minor >= filter_minor, that is, if the value returned by the
- * running kernel has the same major number and a minor number equal
- * equal to or less than the filter being downloaded.  Otherwise, the
- * results are undefined, meaning an error may be returned or packets
- * may be accepted haphazardly.
- * It has nothing to do with the source code version.
- */
-struct bpf_version {
-	u_short bv_major;
-	u_short bv_minor;
-};
-/* Current version number of filter architecture. */
-#define BPF_MAJOR_VERSION 1
-#define BPF_MINOR_VERSION 1
-
-/*
- * BPF ioctls
- *
- * The first set is for compatibility with Sun's pcc style
- * header files.  If your using gcc, we assume that you
- * have run fixincludes so the latter set should work.
- */
-#if (defined(sun) || defined(ibm032)) && !defined(__GNUC__)
-#define	BIOCGBLEN	_IOR(B,102, u_int)
-#define	BIOCSBLEN	_IOWR(B,102, u_int)
-#define	BIOCSETF	_IOW(B,103, struct bpf_program)
-#define	BIOCFLUSH	_IO(B,104)
-#define BIOCPROMISC	_IO(B,105)
-#define	BIOCGDLT	_IOR(B,106, u_int)
-#define BIOCGETIF	_IOR(B,107, struct ifreq)
-#define BIOCSETIF	_IOW(B,108, struct ifreq)
-#define BIOCSRTIMEOUT	_IOW(B,109, struct timeval)
-#define BIOCGRTIMEOUT	_IOR(B,110, struct timeval)
-#define BIOCGSTATS	_IOR(B,111, struct bpf_stat)
-#define BIOCIMMEDIATE	_IOW(B,112, u_int)
-#define BIOCVERSION	_IOR(B,113, struct bpf_version)
-#define BIOCSTCPF	_IOW(B,114, struct bpf_program)
-#define BIOCSUDPF	_IOW(B,115, struct bpf_program)
-#else
-#define	BIOCGBLEN	_IOR('B',102, u_int)
-#define	BIOCSBLEN	_IOWR('B',102, u_int)
-#define	BIOCSETF	_IOW('B',103, struct bpf_program)
-#define	BIOCFLUSH	_IO('B',104)
-#define BIOCPROMISC	_IO('B',105)
-#define	BIOCGDLT	_IOR('B',106, u_int)
-#define BIOCGETIF	_IOR('B',107, struct ifreq)
-#define BIOCSETIF	_IOW('B',108, struct ifreq)
-#define BIOCSRTIMEOUT	_IOW('B',109, struct timeval)
-#define BIOCGRTIMEOUT	_IOR('B',110, struct timeval)
-#define BIOCGSTATS	_IOR('B',111, struct bpf_stat)
-#define BIOCIMMEDIATE	_IOW('B',112, u_int)
-#define BIOCVERSION	_IOR('B',113, struct bpf_version)
-#define BIOCSTCPF	_IOW('B',114, struct bpf_program)
-#define BIOCSUDPF	_IOW('B',115, struct bpf_program)
-#endif
-
-/*
- * Structure prepended to each packet.
- */
-struct bpf_hdr {
-	struct timeval	bh_tstamp;	/* time stamp */
-	bpf_u_int32	bh_caplen;	/* length of captured portion */
-	bpf_u_int32	bh_datalen;	/* original length of packet */
-	u_short		bh_hdrlen;	/* length of bpf header (this struct
-					   plus alignment padding) */
-};
-/*
- * Because the structure above is not a multiple of 4 bytes, some compilers
- * will insist on inserting padding; hence, sizeof(struct bpf_hdr) won't work.
- * Only the kernel needs to know about it; applications use bh_hdrlen.
- */
-#if defined(KERNEL) || defined(_KERNEL)
-#define SIZEOF_BPF_HDR 18
-#endif
-
-/*
- * Data-link level type codes.
- */
-
-/*
- * These are the types that are the same on all platforms; on other
- * platforms, a <net/bpf.h> should be supplied that defines the additional
- * DLT_* codes appropriately for that platform (the BSDs, for example,
- * should not just pick up this version of "bpf.h"; they should also define
- * the additional DLT_* codes used by their kernels, as well as the values
- * defined here - and, if the values they use for particular DLT_ types
- * differ from those here, they should use their values, not the ones
- * here).
- */
-#define DLT_NULL	0	/* no link-layer encapsulation */
-#define DLT_EN10MB	1	/* Ethernet (10Mb) */
-#define DLT_EN3MB	2	/* Experimental Ethernet (3Mb) */
-#define DLT_AX25	3	/* Amateur Radio AX.25 */
-#define DLT_PRONET	4	/* Proteon ProNET Token Ring */
-#define DLT_CHAOS	5	/* Chaos */
-#define DLT_IEEE802	6	/* IEEE 802 Networks */
-#define DLT_ARCNET	7	/* ARCNET */
-#define DLT_SLIP	8	/* Serial Line IP */
-#define DLT_PPP		9	/* Point-to-point Protocol */
-#define DLT_FDDI	10	/* FDDI */
-
-/*
- * These are values from the traditional libpcap "bpf.h".
- * Ports of this to particular platforms should replace these definitions
- * with the ones appropriate to that platform, if the values are
- * different on that platform.
- */
-#define DLT_ATM_RFC1483	11	/* LLC/SNAP encapsulated atm */
-#define DLT_RAW		12	/* raw IP */
-
-/*
- * These are values from BSD/OS's "bpf.h".
- * These are not the same as the values from the traditional libpcap
- * "bpf.h"; however, these values shouldn't be generated by any
- * OS other than BSD/OS, so the correct values to use here are the
- * BSD/OS values.
- *
- * Platforms that have already assigned these values to other
- * DLT_ codes, however, should give these codes the values
- * from that platform, so that programs that use these codes will
- * continue to compile - even though they won't correctly read
- * files of these types.
- */
-#ifdef __NetBSD__
-#ifndef DLT_SLIP_BSDOS
-#define DLT_SLIP_BSDOS	13	/* BSD/OS Serial Line IP */
-#define DLT_PPP_BSDOS	14	/* BSD/OS Point-to-point Protocol */
-#endif
-#else
-#define DLT_SLIP_BSDOS	15	/* BSD/OS Serial Line IP */
-#define DLT_PPP_BSDOS	16	/* BSD/OS Point-to-point Protocol */
-#endif
-
-#define DLT_ATM_CLIP	19	/* Linux Classical-IP over ATM */
-
-/*
- * These values are defined by NetBSD; other platforms should refrain from
- * using them for other purposes, so that NetBSD savefiles with link
- * types of 50 or 51 can be read as this type on all platforms.
- */
-#define DLT_PPP_SERIAL	50	/* PPP over serial with HDLC encapsulation */
-#define DLT_PPP_ETHER	51	/* PPP over Ethernet */
-
-/*
- * Values between 100 and 103 are used in capture file headers as
- * link-layer types corresponding to DLT_ types that differ
- * between platforms; don't use those values for new DLT_ new types.
- */
-
-/*
- * This value was defined by libpcap 0.5; platforms that have defined
- * it with a different value should define it here with that value -
- * a link type of 104 in a save file will be mapped to DLT_C_HDLC,
- * whatever value that happens to be, so programs will correctly
- * handle files with that link type regardless of the value of
- * DLT_C_HDLC.
- *
- * The name DLT_C_HDLC was used by BSD/OS; we use that name for source
- * compatibility with programs written for BSD/OS.
- *
- * libpcap 0.5 defined it as DLT_CHDLC; we define DLT_CHDLC as well,
- * for source compatibility with programs written for libpcap 0.5.
- */
-#define DLT_C_HDLC	104	/* Cisco HDLC */
-#define DLT_CHDLC	DLT_C_HDLC
-
-#define DLT_IEEE802_11	105	/* IEEE 802.11 wireless */
-
-/*
- * Values between 106 and 107 are used in capture file headers as
- * link-layer types corresponding to DLT_ types that might differ
- * between platforms; don't use those values for new DLT_ new types.
- */
-
-/*
- * OpenBSD DLT_LOOP, for loopback devices; it's like DLT_NULL, except
- * that the AF_ type in the link-layer header is in network byte order.
- *
- * OpenBSD defines it as 12, but that collides with DLT_RAW, so we
- * define it as 108 here.  If OpenBSD picks up this file, it should
- * define DLT_LOOP as 12 in its version, as per the comment above -
- * and should not use 108 as a DLT_ value.
- */
-#define DLT_LOOP	108
-
-/*
- * Values between 109 and 112 are used in capture file headers as
- * link-layer types corresponding to DLT_ types that might differ
- * between platforms; don't use those values for new DLT_ types
- * other than the corresponding DLT_ types.
- */
-
-/*
- * This is for Linux cooked sockets.
- */
-#define DLT_LINUX_SLL	113
-
-/*
- * Apple LocalTalk hardware.
- */
-#define DLT_LTALK	114
-
-/*
- * Acorn Econet.
- */
-#define DLT_ECONET	115
-
-/*
- * Reserved for use with OpenBSD ipfilter.
- */
-#define DLT_IPFILTER	116
-
-/*
- * Reserved for use in capture-file headers as a link-layer type
- * corresponding to OpenBSD DLT_PFLOG; DLT_PFLOG is 17 in OpenBSD,
- * but that's DLT_LANE8023 in SuSE 6.3, so we can't use 17 for it
- * in capture-file headers.
- */
-#define DLT_PFLOG	117
-
-/*
- * Registered for Cisco-internal use.
- */
-#define DLT_CISCO_IOS	118
-
-/*
- * Reserved for 802.11 cards using the Prism II chips, with a link-layer
- * header including Prism monitor mode information plus an 802.11
- * header.
- */
-#define DLT_PRISM_HEADER	119
-
-/*
- * Reserved for Aironet 802.11 cards, with an Aironet link-layer header
- * (see Doug Ambrisko's FreeBSD patches).
- */
-#define DLT_AIRONET_HEADER	120
-
-/*
- * Reserved for Siemens HiPath HDLC.
- */
-#define DLT_HHDLC		121
-
-/*
- * Reserved for RFC 2625 IP-over-Fibre Channel, as per a request from
- * Don Lee <donlee@cray.com>.
- *
- * This is not for use with raw Fibre Channel, where the link-layer
- * header starts with a Fibre Channel frame header; it's for IP-over-FC,
- * where the link-layer header starts with an RFC 2625 Network_Header
- * field.
- */
-#define DLT_IP_OVER_FC		122
-
-/*
- * The instruction encodings.
- */
-/* instruction classes */
-#define BPF_CLASS(code) ((code) & 0x07)
-#define		BPF_LD		0x00
-#define		BPF_LDX		0x01
-#define		BPF_ST		0x02
-#define		BPF_STX		0x03
-#define		BPF_ALU		0x04
-#define		BPF_JMP		0x05
-#define		BPF_RET		0x06
-#define		BPF_MISC	0x07
-
-/* ld/ldx fields */
-#define BPF_SIZE(code)	((code) & 0x18)
-#define		BPF_W		0x00
-#define		BPF_H		0x08
-#define		BPF_B		0x10
-#define BPF_MODE(code)	((code) & 0xe0)
-#define		BPF_IMM 	0x00
-#define		BPF_ABS		0x20
-#define		BPF_IND		0x40
-#define		BPF_MEM		0x60
-#define		BPF_LEN		0x80
-#define		BPF_MSH		0xa0
-
-/* alu/jmp fields */
-#define BPF_OP(code)	((code) & 0xf0)
-#define		BPF_ADD		0x00
-#define		BPF_SUB		0x10
-#define		BPF_MUL		0x20
-#define		BPF_DIV		0x30
-#define		BPF_OR		0x40
-#define		BPF_AND		0x50
-#define		BPF_LSH		0x60
-#define		BPF_RSH		0x70
-#define		BPF_NEG		0x80
-#define		BPF_JA		0x00
-#define		BPF_JEQ		0x10
-#define		BPF_JGT		0x20
-#define		BPF_JGE		0x30
-#define		BPF_JSET	0x40
-#define BPF_SRC(code)	((code) & 0x08)
-#define		BPF_K		0x00
-#define		BPF_X		0x08
-
-/* ret - BPF_K and BPF_X also apply */
-#define BPF_RVAL(code)	((code) & 0x18)
-#define		BPF_A		0x10
-
-/* misc */
-#define BPF_MISCOP(code) ((code) & 0xf8)
-#define		BPF_TAX		0x00
-#define		BPF_TXA		0x80
-
-/*
- * The instruction data structure.
- */
-struct bpf_insn {
-	u_short	code;
-	u_char 	jt;
-	u_char 	jf;
-	bpf_int32 k;
-};
-
-/*
- * Macros for insn array initializers.
- */
-#define BPF_STMT(code, k) { (u_short)(code), 0, 0, k }
-#define BPF_JUMP(code, k, jt, jf) { (u_short)(code), jt, jf, k }
-
-#if defined(BSD) && (defined(KERNEL) || defined(_KERNEL))
-/*
- * Systems based on non-BSD kernels don't have ifnet's (or they don't mean
- * anything if it is in <net/if.h>) and won't work like this.
- */
-# if __STDC__
-extern void bpf_tap(struct ifnet *, u_char *, u_int);
-extern void bpf_mtap(struct ifnet *, struct mbuf *);
-extern void bpfattach(struct ifnet *, u_int, u_int);
-extern void bpfilterattach(int);
-# else
-extern void bpf_tap();
-extern void bpf_mtap();
-extern void bpfattach();
-extern void bpfilterattach();
-# endif /* __STDC__ */
-#endif /* BSD && (_KERNEL || KERNEL) */
-#if __STDC__ || defined(__cplusplus)
-extern int bpf_validate(struct bpf_insn *, int);
-extern u_int bpf_filter(struct bpf_insn *, u_char *, u_int, u_int);
-#else
-extern int bpf_validate();
-extern u_int bpf_filter();
-#endif
-
-/*
- * Number of scratch memory words (for BPF_LD|BPF_MEM and BPF_ST).
- */
-#define BPF_MEMWORDS 16
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif