diff options
author | darrenr <darrenr@FreeBSD.org> | 2005-04-25 17:31:50 +0000 |
---|---|---|
committer | darrenr <darrenr@FreeBSD.org> | 2005-04-25 17:31:50 +0000 |
commit | d438802dcb3e270d6fcc65f075c808c64853a7c2 (patch) | |
tree | e2e1c7115044e6dfc86ff65598566fa32e5f7421 /contrib/ipfilter/bpf-ipf.h | |
parent | 590450fec65a8e72a8965117398bc8f14938b4a8 (diff) | |
download | FreeBSD-src-d438802dcb3e270d6fcc65f075c808c64853a7c2.zip FreeBSD-src-d438802dcb3e270d6fcc65f075c808c64853a7c2.tar.gz |
import ipfilter 4.1.8 into the vendor branch
Diffstat (limited to 'contrib/ipfilter/bpf-ipf.h')
-rw-r--r-- | contrib/ipfilter/bpf-ipf.h | 452 |
1 files changed, 452 insertions, 0 deletions
diff --git a/contrib/ipfilter/bpf-ipf.h b/contrib/ipfilter/bpf-ipf.h new file mode 100644 index 0000000..c303152 --- /dev/null +++ b/contrib/ipfilter/bpf-ipf.h @@ -0,0 +1,452 @@ +/* $NetBSD$ */ + +/*- + * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 + * The Regents of the University of California. All rights reserved. + * + * This code is derived from the Stanford/CMU enet packet filter, + * (net/enet.c) distributed as part of 4.3BSD, and code contributed + * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence + * Berkeley Laboratory. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#)bpf.h 7.1 (Berkeley) 5/7/91 + * + * @(#) $Header: /devel/CVS/IP-Filter/bpf-ipf.h,v 2.1 2002/10/26 12:14:26 darrenr Exp $ (LBL) + */ + +#ifndef BPF_MAJOR_VERSION + +#ifdef __cplusplus +extern "C" { +#endif + +/* BSD style release date */ +#define BPF_RELEASE 199606 + +typedef int bpf_int32; +typedef u_int bpf_u_int32; + +/* + * Alignment macros. BPF_WORDALIGN rounds up to the next + * even multiple of BPF_ALIGNMENT. + */ +#ifndef __NetBSD__ +#define BPF_ALIGNMENT sizeof(bpf_int32) +#else +#define BPF_ALIGNMENT sizeof(long) +#endif +#define BPF_WORDALIGN(x) (((x)+(BPF_ALIGNMENT-1))&~(BPF_ALIGNMENT-1)) + +#define BPF_MAXINSNS 512 +#define BPF_MAXBUFSIZE 0x8000 +#define BPF_MINBUFSIZE 32 + +/* + * Structure for BIOCSETF. + */ +struct bpf_program { + u_int bf_len; + struct bpf_insn *bf_insns; +}; + +/* + * Struct returned by BIOCGSTATS. + */ +struct bpf_stat { + u_int bs_recv; /* number of packets received */ + u_int bs_drop; /* number of packets dropped */ +}; + +/* + * Struct return by BIOCVERSION. This represents the version number of + * the filter language described by the instruction encodings below. + * bpf understands a program iff kernel_major == filter_major && + * kernel_minor >= filter_minor, that is, if the value returned by the + * running kernel has the same major number and a minor number equal + * equal to or less than the filter being downloaded. Otherwise, the + * results are undefined, meaning an error may be returned or packets + * may be accepted haphazardly. + * It has nothing to do with the source code version. + */ +struct bpf_version { + u_short bv_major; + u_short bv_minor; +}; +/* Current version number of filter architecture. */ +#define BPF_MAJOR_VERSION 1 +#define BPF_MINOR_VERSION 1 + +/* + * BPF ioctls + * + * The first set is for compatibility with Sun's pcc style + * header files. If your using gcc, we assume that you + * have run fixincludes so the latter set should work. + */ +#if (defined(sun) || defined(ibm032)) && !defined(__GNUC__) +#define BIOCGBLEN _IOR(B,102, u_int) +#define BIOCSBLEN _IOWR(B,102, u_int) +#define BIOCSETF _IOW(B,103, struct bpf_program) +#define BIOCFLUSH _IO(B,104) +#define BIOCPROMISC _IO(B,105) +#define BIOCGDLT _IOR(B,106, u_int) +#define BIOCGETIF _IOR(B,107, struct ifreq) +#define BIOCSETIF _IOW(B,108, struct ifreq) +#define BIOCSRTIMEOUT _IOW(B,109, struct timeval) +#define BIOCGRTIMEOUT _IOR(B,110, struct timeval) +#define BIOCGSTATS _IOR(B,111, struct bpf_stat) +#define BIOCIMMEDIATE _IOW(B,112, u_int) +#define BIOCVERSION _IOR(B,113, struct bpf_version) +#define BIOCSTCPF _IOW(B,114, struct bpf_program) +#define BIOCSUDPF _IOW(B,115, struct bpf_program) +#else +#define BIOCGBLEN _IOR('B',102, u_int) +#define BIOCSBLEN _IOWR('B',102, u_int) +#define BIOCSETF _IOW('B',103, struct bpf_program) +#define BIOCFLUSH _IO('B',104) +#define BIOCPROMISC _IO('B',105) +#define BIOCGDLT _IOR('B',106, u_int) +#define BIOCGETIF _IOR('B',107, struct ifreq) +#define BIOCSETIF _IOW('B',108, struct ifreq) +#define BIOCSRTIMEOUT _IOW('B',109, struct timeval) +#define BIOCGRTIMEOUT _IOR('B',110, struct timeval) +#define BIOCGSTATS _IOR('B',111, struct bpf_stat) +#define BIOCIMMEDIATE _IOW('B',112, u_int) +#define BIOCVERSION _IOR('B',113, struct bpf_version) +#define BIOCSTCPF _IOW('B',114, struct bpf_program) +#define BIOCSUDPF _IOW('B',115, struct bpf_program) +#endif + +/* + * Structure prepended to each packet. + */ +struct bpf_hdr { + struct timeval bh_tstamp; /* time stamp */ + bpf_u_int32 bh_caplen; /* length of captured portion */ + bpf_u_int32 bh_datalen; /* original length of packet */ + u_short bh_hdrlen; /* length of bpf header (this struct + plus alignment padding) */ +}; +/* + * Because the structure above is not a multiple of 4 bytes, some compilers + * will insist on inserting padding; hence, sizeof(struct bpf_hdr) won't work. + * Only the kernel needs to know about it; applications use bh_hdrlen. + */ +#if defined(KERNEL) || defined(_KERNEL) +#define SIZEOF_BPF_HDR 18 +#endif + +/* + * Data-link level type codes. + */ + +/* + * These are the types that are the same on all platforms; on other + * platforms, a <net/bpf.h> should be supplied that defines the additional + * DLT_* codes appropriately for that platform (the BSDs, for example, + * should not just pick up this version of "bpf.h"; they should also define + * the additional DLT_* codes used by their kernels, as well as the values + * defined here - and, if the values they use for particular DLT_ types + * differ from those here, they should use their values, not the ones + * here). + */ +#define DLT_NULL 0 /* no link-layer encapsulation */ +#define DLT_EN10MB 1 /* Ethernet (10Mb) */ +#define DLT_EN3MB 2 /* Experimental Ethernet (3Mb) */ +#define DLT_AX25 3 /* Amateur Radio AX.25 */ +#define DLT_PRONET 4 /* Proteon ProNET Token Ring */ +#define DLT_CHAOS 5 /* Chaos */ +#define DLT_IEEE802 6 /* IEEE 802 Networks */ +#define DLT_ARCNET 7 /* ARCNET */ +#define DLT_SLIP 8 /* Serial Line IP */ +#define DLT_PPP 9 /* Point-to-point Protocol */ +#define DLT_FDDI 10 /* FDDI */ + +/* + * These are values from the traditional libpcap "bpf.h". + * Ports of this to particular platforms should replace these definitions + * with the ones appropriate to that platform, if the values are + * different on that platform. + */ +#define DLT_ATM_RFC1483 11 /* LLC/SNAP encapsulated atm */ +#define DLT_RAW 12 /* raw IP */ + +/* + * These are values from BSD/OS's "bpf.h". + * These are not the same as the values from the traditional libpcap + * "bpf.h"; however, these values shouldn't be generated by any + * OS other than BSD/OS, so the correct values to use here are the + * BSD/OS values. + * + * Platforms that have already assigned these values to other + * DLT_ codes, however, should give these codes the values + * from that platform, so that programs that use these codes will + * continue to compile - even though they won't correctly read + * files of these types. + */ +#ifdef __NetBSD__ +#ifndef DLT_SLIP_BSDOS +#define DLT_SLIP_BSDOS 13 /* BSD/OS Serial Line IP */ +#define DLT_PPP_BSDOS 14 /* BSD/OS Point-to-point Protocol */ +#endif +#else +#define DLT_SLIP_BSDOS 15 /* BSD/OS Serial Line IP */ +#define DLT_PPP_BSDOS 16 /* BSD/OS Point-to-point Protocol */ +#endif + +#define DLT_ATM_CLIP 19 /* Linux Classical-IP over ATM */ + +/* + * These values are defined by NetBSD; other platforms should refrain from + * using them for other purposes, so that NetBSD savefiles with link + * types of 50 or 51 can be read as this type on all platforms. + */ +#define DLT_PPP_SERIAL 50 /* PPP over serial with HDLC encapsulation */ +#define DLT_PPP_ETHER 51 /* PPP over Ethernet */ + +/* + * Values between 100 and 103 are used in capture file headers as + * link-layer types corresponding to DLT_ types that differ + * between platforms; don't use those values for new DLT_ new types. + */ + +/* + * This value was defined by libpcap 0.5; platforms that have defined + * it with a different value should define it here with that value - + * a link type of 104 in a save file will be mapped to DLT_C_HDLC, + * whatever value that happens to be, so programs will correctly + * handle files with that link type regardless of the value of + * DLT_C_HDLC. + * + * The name DLT_C_HDLC was used by BSD/OS; we use that name for source + * compatibility with programs written for BSD/OS. + * + * libpcap 0.5 defined it as DLT_CHDLC; we define DLT_CHDLC as well, + * for source compatibility with programs written for libpcap 0.5. + */ +#define DLT_C_HDLC 104 /* Cisco HDLC */ +#define DLT_CHDLC DLT_C_HDLC + +#define DLT_IEEE802_11 105 /* IEEE 802.11 wireless */ + +/* + * Values between 106 and 107 are used in capture file headers as + * link-layer types corresponding to DLT_ types that might differ + * between platforms; don't use those values for new DLT_ new types. + */ + +/* + * OpenBSD DLT_LOOP, for loopback devices; it's like DLT_NULL, except + * that the AF_ type in the link-layer header is in network byte order. + * + * OpenBSD defines it as 12, but that collides with DLT_RAW, so we + * define it as 108 here. If OpenBSD picks up this file, it should + * define DLT_LOOP as 12 in its version, as per the comment above - + * and should not use 108 as a DLT_ value. + */ +#define DLT_LOOP 108 + +/* + * Values between 109 and 112 are used in capture file headers as + * link-layer types corresponding to DLT_ types that might differ + * between platforms; don't use those values for new DLT_ types + * other than the corresponding DLT_ types. + */ + +/* + * This is for Linux cooked sockets. + */ +#define DLT_LINUX_SLL 113 + +/* + * Apple LocalTalk hardware. + */ +#define DLT_LTALK 114 + +/* + * Acorn Econet. + */ +#define DLT_ECONET 115 + +/* + * Reserved for use with OpenBSD ipfilter. + */ +#define DLT_IPFILTER 116 + +/* + * Reserved for use in capture-file headers as a link-layer type + * corresponding to OpenBSD DLT_PFLOG; DLT_PFLOG is 17 in OpenBSD, + * but that's DLT_LANE8023 in SuSE 6.3, so we can't use 17 for it + * in capture-file headers. + */ +#define DLT_PFLOG 117 + +/* + * Registered for Cisco-internal use. + */ +#define DLT_CISCO_IOS 118 + +/* + * Reserved for 802.11 cards using the Prism II chips, with a link-layer + * header including Prism monitor mode information plus an 802.11 + * header. + */ +#define DLT_PRISM_HEADER 119 + +/* + * Reserved for Aironet 802.11 cards, with an Aironet link-layer header + * (see Doug Ambrisko's FreeBSD patches). + */ +#define DLT_AIRONET_HEADER 120 + +/* + * Reserved for Siemens HiPath HDLC. + */ +#define DLT_HHDLC 121 + +/* + * Reserved for RFC 2625 IP-over-Fibre Channel, as per a request from + * Don Lee <donlee@cray.com>. + * + * This is not for use with raw Fibre Channel, where the link-layer + * header starts with a Fibre Channel frame header; it's for IP-over-FC, + * where the link-layer header starts with an RFC 2625 Network_Header + * field. + */ +#define DLT_IP_OVER_FC 122 + +/* + * The instruction encodings. + */ +/* instruction classes */ +#define BPF_CLASS(code) ((code) & 0x07) +#define BPF_LD 0x00 +#define BPF_LDX 0x01 +#define BPF_ST 0x02 +#define BPF_STX 0x03 +#define BPF_ALU 0x04 +#define BPF_JMP 0x05 +#define BPF_RET 0x06 +#define BPF_MISC 0x07 + +/* ld/ldx fields */ +#define BPF_SIZE(code) ((code) & 0x18) +#define BPF_W 0x00 +#define BPF_H 0x08 +#define BPF_B 0x10 +#define BPF_MODE(code) ((code) & 0xe0) +#define BPF_IMM 0x00 +#define BPF_ABS 0x20 +#define BPF_IND 0x40 +#define BPF_MEM 0x60 +#define BPF_LEN 0x80 +#define BPF_MSH 0xa0 + +/* alu/jmp fields */ +#define BPF_OP(code) ((code) & 0xf0) +#define BPF_ADD 0x00 +#define BPF_SUB 0x10 +#define BPF_MUL 0x20 +#define BPF_DIV 0x30 +#define BPF_OR 0x40 +#define BPF_AND 0x50 +#define BPF_LSH 0x60 +#define BPF_RSH 0x70 +#define BPF_NEG 0x80 +#define BPF_JA 0x00 +#define BPF_JEQ 0x10 +#define BPF_JGT 0x20 +#define BPF_JGE 0x30 +#define BPF_JSET 0x40 +#define BPF_SRC(code) ((code) & 0x08) +#define BPF_K 0x00 +#define BPF_X 0x08 + +/* ret - BPF_K and BPF_X also apply */ +#define BPF_RVAL(code) ((code) & 0x18) +#define BPF_A 0x10 + +/* misc */ +#define BPF_MISCOP(code) ((code) & 0xf8) +#define BPF_TAX 0x00 +#define BPF_TXA 0x80 + +/* + * The instruction data structure. + */ +struct bpf_insn { + u_short code; + u_char jt; + u_char jf; + bpf_int32 k; +}; + +/* + * Macros for insn array initializers. + */ +#define BPF_STMT(code, k) { (u_short)(code), 0, 0, k } +#define BPF_JUMP(code, k, jt, jf) { (u_short)(code), jt, jf, k } + +#if defined(BSD) && (defined(KERNEL) || defined(_KERNEL)) +/* + * Systems based on non-BSD kernels don't have ifnet's (or they don't mean + * anything if it is in <net/if.h>) and won't work like this. + */ +# if __STDC__ +extern void bpf_tap(struct ifnet *, u_char *, u_int); +extern void bpf_mtap(struct ifnet *, struct mbuf *); +extern void bpfattach(struct ifnet *, u_int, u_int); +extern void bpfilterattach(int); +# else +extern void bpf_tap(); +extern void bpf_mtap(); +extern void bpfattach(); +extern void bpfilterattach(); +# endif /* __STDC__ */ +#endif /* BSD && (_KERNEL || KERNEL) */ +#if __STDC__ || defined(__cplusplus) +extern int bpf_validate(struct bpf_insn *, int); +extern u_int bpf_filter(struct bpf_insn *, u_char *, u_int, u_int); +#else +extern int bpf_validate(); +extern u_int bpf_filter(); +#endif + +/* + * Number of scratch memory words (for BPF_LD|BPF_MEM and BPF_ST). + */ +#define BPF_MEMWORDS 16 + +#ifdef __cplusplus +} +#endif + +#endif |