Stripped down import of hostapd v0.3.7

1 files changed, 45 insertions, 0 deletions

diff --git a/contrib/hostapd/hostapd.eap_user b/contrib/hostapd/hostapd.eap_user
new file mode 100644
index 0000000..529334a
--- /dev/null
+++ b/contrib/hostapd/hostapd.eap_user
@@ -0,0 +1,45 @@
+# hostapd user database for integrated EAP authenticator
+# Each line must contain an identity, EAP method(s), and an optional password
+# separated with whitespace (space or tab). The identity and password must be
+# double quoted ("user"). [2] flag in the end of the line can be used to mark
+# users for tunneled phase 2 authentication (e.g., within EAP-PEAP). In these
+# cases, an anonymous identity can be used in the unencrypted phase 1 and the
+# real user identity is transmitted only within the encrypted tunnel in phase
+# 2. If non-anonymous access is needed, two user entries is needed, one for
+# phase 1 and another with the same username for phase 2.
+#
+# EAP-TLS, EAP-PEAP, EAP-TTLS, and EAP-SIM do not use password option.
+# EAP-MD5, EAP-MSCHAPV2, and EAP-GTC require a password.
+# EAP-PEAP and EAP-TTLS require Phase 2 configuration.
+#
+# * can be used as a wildcard to match any user identity. The main purposes for
+# this are to set anonymous phase 1 identity for EAP-PEAP and EAP-TTLS and to
+# avoid having to configure every certificate for EAP-TLS authentication. The
+# first matching entry is selected, so * should be used as the last phase 1
+# user entry.
+#
+# Multiple methods can be configured to make the authenticator try them one by
+# one until the peer accepts one. The method names are separated with a
+# comma (,).
+#
+# [ver=0] and [ver=1] flags after EAP type PEAP can be used to force PEAP
+# version based on the Phase 1 identity. Without this flag, the EAP
+# authenticator advertises the highest supported version and select the version
+# based on the first PEAP packet from the supplicant.
+
+# Phase 1 users
+"user"		MD5	"password"
+"test user"	MD5	"secret"
+"example user"	TLS
+"DOMAIN\user"	MSCHAPV2	"password"
+"gtc user"	GTC	"password"
+"ttls"		TTLS
+"not anonymous"	PEAP
+*		PEAP,TTLS,TLS,SIM
+
+# Phase 2 (tunnelled within EAP-PEAP or EAP-TTLS) users
+"t-md5"		MD5	"password"	[2]
+"DOMAIN\t-mschapv2"	MSCHAPV2	"password"	[2]
+"t-gtc"		GTC	"password"	[2]
+"not anonymous"	MSCHAPV2	"password"	[2]
+"user"		MD5,GTC,MSCHAPV2	"password"	[2]