This commit was generated by cvs2svn to compensate for changes in r53140,

which included commits to RCS files with non-trunk default branches.

1 files changed, 2170 insertions, 0 deletions

diff --git a/contrib/gcc/f/g77install.texi b/contrib/gcc/f/g77install.texi
new file mode 100644
index 0000000..7041107
--- /dev/null
+++ b/contrib/gcc/f/g77install.texi
@@ -0,0 +1,2170 @@
+@c Copyright (C) 1995-1997 Free Software Foundation, Inc.
+@c This is part of the G77 manual.
+@c For copying conditions, see the file g77.texi.
+
+@c The text of this file appears in the file INSTALL
+@c in the G77 distribution, as well as in the G77 manual.
+
+@c 1998-07-13
+
+@set version-g77 0.5.24
+@set version-gcc 2.8.1
+@set version-autoconf 2.12
+@set version-bison 1.25
+@set version-gperf 2.5
+@set version-gzip 1.2.4
+@set version-make 3.76.1
+@set version-makeinfo 1.68
+@set version-patch 2.5
+@set version-sed 2.05
+@set version-tar 1.12
+@set version-texinfo 3.12
+
+@ifclear INSTALLONLY
+@node Installation
+@chapter Installing GNU Fortran
+@end ifclear
+@cindex installing GNU Fortran
+
+The following information describes how to install @code{g77}.
+
+Note that, for @code{egcs} users,
+much of this information is obsolete,
+and is superceded by the
+@code{egcs} installation procedures.
+Such information is explicitly flagged as such.
+
+The information in this file generally pertains to dealing
+with @emph{source} distributions of @code{g77} and @code{gcc}.
+It is possible that some of this information will be applicable
+to some @emph{binary} distributions of these products---however,
+since these distributions are not made by the maintainers of
+@code{g77}, responsibility for binary distributions rests with
+whoever built and first distributed them.
+
+Nevertheless, efforts to make @code{g77} easier to both build
+and install from source and package up as a binary distribution
+are ongoing.
+
+@menu
+* Prerequisites::          Make sure your system is ready for @code{g77}.
+* Problems Installing::    Known trouble areas.
+* Settings::               Changing @code{g77} internals before building.
+* Quick Start::            The easier procedure for non-experts.
+* Complete Installation::  For experts, or those who want to be: the details.
+* Distributing Binaries::  If you plan on distributing your @code{g77}.
+@end menu
+
+@node Prerequisites
+@section Prerequisites
+@cindex prerequisites
+
+@emph{Version info:}
+For @code{egcs} users, the following information is
+superceded by the @code{egcs} installation instructions.
+
+The procedures described to unpack, configure, build, and
+install @code{g77} assume your system has certain programs
+already installed.
+
+The following prerequisites should be met by your
+system before you follow the @code{g77} installation instructions:
+
+@table @asis
+@item @code{gzip} and @code{tar}
+To unpack the @code{gcc} and @code{g77} distributions,
+you'll need the @code{gunzip} utility in the @code{gzip}
+distribution.
+Most UNIX systems already have @code{gzip} installed.
+If yours doesn't, you can get it from the FSF.
+
+Note that you'll need @code{tar} and other utilities
+as well, but all UNIX systems have these.
+There are GNU versions of all these available---in fact,
+a complete GNU UNIX system can be put together on
+most systems, if desired.
+
+The version of GNU @code{gzip} used to package this release
+is @value{version-gzip}.
+(The version of GNU @code{tar} used to package this release
+is @value{version-tar}.)
+
+@item @file{gcc-@value{version-gcc}.tar.gz}
+You need to have this, or some other applicable, version
+of @code{gcc} on your system.
+The version should be an exact copy of a distribution
+from the FSF.
+Its size is approximately 8.4MB.
+
+If you've already unpacked @file{gcc-@value{version-gcc}.tar.gz} into a
+directory (named @file{gcc-@value{version-gcc}}) called the @dfn{source tree}
+for @code{gcc}, you can delete the distribution
+itself, but you'll need to remember to skip any instructions to unpack
+this distribution.
+
+Without an applicable @code{gcc} source tree, you cannot
+build @code{g77}.
+You can obtain an FSF distribution of @code{gcc} from the FSF.
+
+@item @file{g77-@value{version-g77}.tar.gz}
+You probably have already unpacked this package,
+or you are reading an advance copy of these installation instructions,
+which are contained in this distribution.
+The size of this package is approximately 1.4MB.
+
+You can obtain an FSF distribution of @code{g77} from the FSF,
+the same way you obtained @code{gcc}.
+
+@item Enough disk space
+The amount of disk space needed to unpack, build, install,
+and use @code{g77} depends on the type of system you're
+using, how you build @code{g77}, and how much of it you
+install (primarily, which languages you install).
+
+The sizes shown below assume all languages distributed in
+@c As of `Version 2.249', texinfo.tex loses on a construction like
+@c @code{...@value{...-...}...} since the hyphen is expanded as
+@c -@discretionary{}{}{}, even though @value resets its catcode.
+@c Fortunately this is currently the only instance.  Kluge, kluge.
+@iftex
+@begingroup @let@codedash=@realdash
+@end iftex
+@code{gcc-@value{version-gcc}},
+@iftex
+@endgroup
+@end iftex
+plus @code{g77}, will be built and installed.
+These sizes are indicative of GNU/Linux systems on
+Intel x86 running COFF and on Digital Alpha (AXP) systems
+running ELF.
+These should be fairly representative of 32-bit and 64-bit
+systems, respectively.
+
+Note that all sizes are approximate and subject to change without
+notice!
+They are based on preliminary releases of g77 made shortly
+before the public beta release.
+
+@itemize ---
+@item
+@code{gcc} and @code{g77} distributions occupy 10MB
+packed, 40MB unpacked.
+These consist of the source code and documentation,
+plus some derived files (mostly documentation), for
+@code{gcc} and @code{g77}.
+Any deviations from these numbers for different
+kinds of systems are likely to be very minor.
+
+@item
+A ``bootstrap'' build requires an additional 91MB
+for a total of 132MB on an ix86, and an additional
+136MB for a total of 177MB on an Alpha.
+
+@item
+Removing @file{gcc/stage1} after the build recovers
+13MB for a total of 119MB on an ix86, and recovers
+21MB for a total of 155MB on an Alpha.
+
+After doing this, the integrity of the build can
+still be verified via @samp{make compare}, and the
+@code{gcc} compiler modified and used to build itself for
+testing fairly quickly, using the copy of the compiler
+kept in @code{gcc/stage2}.
+
+@item
+Removing @file{gcc/stage2} after the build further
+recovers 39MB for a total of 80MB, and recovers
+57MB for a total of 98MB on an Alpha.
+
+After doing this, the compiler can still be installed,
+especially if GNU @code{make} is used to avoid
+gratuitous rebuilds (or, the installation can be done
+by hand).
+
+@item
+Installing @code{gcc} and @code{g77} copies
+23MB onto the @samp{--prefix} disk for a total of 103MB
+on an ix86, and copies 31MB onto the @samp{--prefix}
+disk for a total of 130MB on an Alpha.
+@end itemize
+
+After installation, if no further modifications and
+builds of @code{gcc} or @code{g77} are planned, the
+source and build directory may be removed, leaving
+the total impact on a system's disk storage as
+that of the amount copied during installation.
+
+Systems with the appropriate version of @code{gcc}
+installed don't require the complete
+bootstrap build.
+Doing a ``straight build'' requires about as much
+space as does a bootstrap build followed by removing
+both the @file{gcc/stage1} and @file{gcc/stage2}
+directories.
+
+Installing @code{gcc} and @code{g77} over existing
+versions might require less @emph{new} disk space,
+but note that, unlike many products, @code{gcc}
+installs itself in a way that avoids overwriting other
+installed versions of itself, so that other versions may
+easily be invoked (via @samp{gcc -V @var{version}}).
+
+So, the amount of space saved as a result of having
+an existing version of @code{gcc} and @code{g77}
+already installed is not much---typically only the
+command drivers (@code{gcc}, @code{g77}, @code{g++},
+and so on, which are small) and the documentation
+is overwritten by the new installation.
+The rest of the new installation is done without
+replacing existing installed versions (assuming
+they have different version numbers).
+
+@item @code{make}
+Your system must have @code{make}, and you will probably save
+yourself a lot of trouble if it is GNU @code{make} (sometimes
+referred to as @code{gmake}).
+In particular, you probably need GNU @code{make}
+to build outside the source directory
+(with @code{configure}'s @samp{--srcdir} option.)
+
+The version of GNU @code{make} used to develop this release
+is @value{version-make}.
+
+@item @code{cc}
+Your system must have a working C compiler.
+If it doesn't, you might be able to obtain
+a prebuilt binary of some version of @code{gcc}
+from the network or on CD-ROM,
+perhaps from the FSF@.
+The best source of information about binaries
+is probably a system-specific Usenet news group,
+initially via its FAQ.
+
+@xref{Installation,,Installing GNU CC,gcc,Using and Porting GNU CC},
+for more information on prerequisites for installing @code{gcc}.
+
+@item @code{sed}
+All UNIX systems have @code{sed}, but some have a broken
+version that cannot handle configuring, building, or
+installing @code{gcc} or @code{g77}.
+
+The version of GNU @code{sed} used to develop this release
+is @value{version-sed}.
+(Note that GNU @code{sed} version 3.0 was withdrawn by the
+FSF---if you happen to have this version installed, replace
+it with version @value{version-sed} immediately.
+See a GNU distribution site for further explanation.)
+
+@item @code{root} access or equivalent
+To perform the complete installation procedures on a system,
+you need to have @code{root} access to that system, or
+equivalent access to the @samp{--prefix} directory tree
+specified on the @code{configure} command line.
+
+Portions of the procedure (such as configuring and building
+@code{g77}) can be performed by any user with enough disk
+space and virtual memory.
+
+However, these instructions are oriented towards less-experienced
+users who want to install @code{g77} on their own personal
+systems.
+
+System administrators with more experience will want to
+determine for themselves how they want to modify the
+procedures described below to suit the needs of their
+installation.
+
+@item @code{autoconf}
+The version of GNU @code{autoconf} used to develop this release
+is @value{version-autoconf}.
+
+@code{autoconf} is not needed in the typical case of
+installing @code{gcc} and @code{g77}.
+@xref{Missing tools?}, for information on when it
+might be needed and how to work around not having it.
+
+@item @code{bison}
+The version of GNU @code{bison} used to develop this release
+is @value{version-bison}.
+
+@code{bison} is not needed in the typical case of
+installing @code{gcc} and @code{g77}.
+@xref{Missing tools?}, for information on when it
+might be needed and how to work around not having it.
+
+@item @code{gperf}
+The version of GNU @code{gperf} used to develop this release
+is @value{version-gperf}.
+
+@code{gperf} is not needed in the typical case of
+installing @code{gcc} and @code{g77}.
+@xref{Missing tools?}, for information on when it
+might be needed and how to work around not having it.
+
+@item @code{makeinfo}
+The version of GNU @code{makeinfo} used to develop this release
+is @value{version-makeinfo}.
+
+@code{makeinfo} is part of the GNU @code{texinfo} package;
+@code{makeinfo} version @value{version-makeinfo}
+is distributed as part of
+GNU @code{texinfo} version @value{version-texinfo}.
+
+@code{makeinfo} is not needed in the typical case of
+installing @code{gcc} and @code{g77}.
+@xref{Missing tools?}, for information on when it
+might be needed and how to work around not having it.
+
+An up-to-date version of GNU @code{makeinfo} is still convenient
+when obtaining a new version of a GNU distribution such as
+@code{gcc} or @code{g77},
+as it allows you to obtain the @file{.diff.gz} file
+instead of the entire @file{.tar.gz} distribution
+(assuming you have installed @code{patch}).
+
+@item @code{patch}
+The version of GNU @code{patch} used to develop this release
+is @value{version-patch}.
+
+Beginning with @code{g77} version 0.5.23, it is no longer
+necessary to patch the @code{gcc} back end to build @code{g77}.
+
+An up-to-date version of GNU @code{patch} is still convenient
+when obtaining a new version of a GNU distribution such as
+@code{gcc} or @code{g77},
+as it allows you to obtain the @file{.diff.gz} file
+instead of the entire @file{.tar.gz} distribution
+(assuming you have installed the tools needed
+to rebuild derived files, such as @code{makeinfo}).
+@end table
+
+@node Problems Installing
+@section Problems Installing
+@cindex problems installing
+@cindex installation problems
+
+This is a list of problems (and some apparent problems which don't
+really mean anything is wrong) that show up when configuring,
+building, installing, or porting GNU Fortran.
+
+@xref{Installation Problems,,,gcc,Using and Porting GNU CC},
+for more information on installation problems that can afflict
+either @code{gcc} or @code{g77}.
+
+@menu
+* General Problems::         Problems afflicting most or all systems.
+* System-specific Problems:: Problems afflicting particular systems.
+* Cross-compiler Problems::  Problems afflicting cross-compilation setups.
+@end menu
+
+@node General Problems
+@subsection General Problems
+
+These problems can occur on most or all systems.
+
+@menu
+* GNU C Required::             Why even ANSI C is not enough.
+* Patching GNU CC::            Why @code{gcc} needn't be patched.
+* Building GNU CC Necessary::  Why you can't build @emph{just} Fortran.
+* Missing strtoul or bsearch:: When linking @samp{f771} fails.
+* Cleanup Kills Stage Directories::  For @code{g77} developers.
+* LANGUAGES Macro Ignored::    Sometimes @samp{LANGUAGES} is ignored.
+@end menu
+
+@node GNU C Required
+@subsubsection GNU C Required
+@cindex GNU C required
+@cindex requirements, GNU C
+
+Compiling @code{g77} requires GNU C, not just ANSI C.
+Fixing this wouldn't
+be very hard (just tedious), but the code using GNU extensions to
+the C language is expected to be rewritten for 0.6 anyway,
+so there are no plans for an interim fix.
+
+This requirement does not mean you must already have @code{gcc}
+installed to build @code{g77}.
+As long as you have a working C compiler, you can use a
+bootstrap build to automate the process of first building
+@code{gcc} using the working C compiler you have, then building
+@code{g77} and rebuilding @code{gcc} using that just-built @code{gcc},
+and so on.
+
+@node Patching GNU CC
+@subsubsection Patching GNU CC
+@cindex patch files
+@cindex GBE
+
+@code{g77} no longer requires application of a patch file
+to the @code{gcc} compiler tree.
+In fact, no such patch file is distributed with @code{g77}.
+This is as of version 0.5.23
+and @code{egcs} version 1.0.
+
+@node Building GNU CC Necessary
+@subsubsection Building GNU CC Necessary
+@cindex gcc, building
+@cindex building gcc
+
+It should be possible to build the runtime without building @code{cc1}
+and other non-Fortran items, but, for now, an easy way to do that
+is not yet established.
+
+@node Missing strtoul or bsearch
+@subsubsection Missing strtoul or bsearch
+@cindex bsearch
+@cindex _bsearch
+@cindex strtoul
+@cindex _strtoul
+@cindex undefined reference (_bsearch)
+@cindex undefined reference (_strtoul)
+@cindex f771, linking error for
+@cindex linking error for f771
+@cindex ld error for f771
+@cindex ld can't find _bsearch
+@cindex ld can't find _strtoul
+@cindex SunOS4
+
+@emph{Version info:}
+The following information does not apply to the
+@code{egcs} version of @code{g77}.
+
+On SunOS4 systems, linking the @code{f771} program used to
+produce an error message concerning an undefined symbol named
+@samp{_strtoul}, because the @samp{strtoul} library function
+is not provided on that system.
+
+Other systems have, in the past, been reported to not provide
+their own @samp{strtoul} or @samp{bsearch} function.
+
+Some versions @code{g77} tried to default to providing bare-bones
+versions of @code{bsearch} and @code{strtoul} automatically,
+but every attempt at this has failed for at least one kind of system.
+
+To limit the failures to those few systems actually missing the
+required routines, the bare-bones versions are still provided,
+in @file{gcc/f/proj.c},
+if the appropriate macros are defined.
+These are @code{NEED_BSEARCH} for @samp{bsearch} and
+@code{NEED_STRTOUL} for @samp{NEED_STRTOUL}.
+
+Therefore, if you are sure your system is missing
+@code{bsearch} or @code{strtoul} in its library,
+define the relevant macro(s) before building @code{g77}.
+This can be done by editing @file{gcc/f/proj.c} and inserting
+either or both of the following @samp{#define} statements
+before the comment shown:
+
+@smallexample
+/* Insert #define statements here.  */
+
+#define NEED_BSEARCH
+#define NEED_STRTOUL
+@end smallexample
+
+Then, continue configuring and building @code{g77} as usual.
+
+Or, you can define these on the @code{make} command line.
+To build with the bundled @code{cc} on SunOS4, for example, try:
+@smallexample
+make bootstrap BOOT_CFLAGS='-O2 -g -DNEED_STRTOUL'
+@end smallexample
+
+If you then encounter problems compiling @file{gcc/f/proj.c},
+it might be due to a discrepancy between how @samp{bsearch}
+or @samp{strtoul} are defined by that file and how they're
+declared by your system's header files.
+
+In that case, you'll have to use some basic knowledge of C
+to work around the problem, perhaps by editing @file{gcc/f/proj.c}
+somewhat.
+
+@node Cleanup Kills Stage Directories
+@subsubsection Cleanup Kills Stage Directories
+@cindex stage directories
+@cindex make clean
+
+It'd be helpful if @code{g77}'s @file{Makefile.in} or @file{Make-lang.in}
+would create the various @file{stage@var{n}} directories and their
+subdirectories, so developers and expert installers wouldn't have to
+reconfigure after cleaning up.
+
+That help has arrived as of version 0.5.23 of @code{g77}
+and version 1.1 of @code{egcs}.
+Configuration itself no longer creates any particular directories
+that are unique to @code{g77}.
+The build procedures in @file{Make-lang.in} take care of
+that, on demand.
+
+@node LANGUAGES Macro Ignored
+@subsubsection LANGUAGES Macro Ignored
+@cindex @samp{LANGUAGES} macro ignored
+@cindex ignoring @samp{LANGUAGES} macro
+
+Prior to version 0.5.23 of @code{g77}
+and version 1.1 of @code{egcs},
+@code{g77} would sometimes ignore
+the absence of @samp{f77} and @samp{F77} in the
+@samp{LANGUAGES} macro definition used for the
+@code{make} command being processed.
+
+As of @code{g77} version 0.5.23
+and @code{egcs} version 1.1,
+@code{g77} now obeys this macro
+in all relevant situations.
+
+However, in versions of @code{gcc} through 2.8.1,
+non-@code{g77} portions of @code{gcc},
+such as @code{g++},
+are known to go ahead and perform various
+language-specific activities when their
+respective language strings do not appear
+in the @samp{LANGUAGES} macro in effect
+during that invocation of @code{make}.
+
+It is expected that these remaining problems will
+be fixed in a future version of @code{gcc}.
+
+@node System-specific Problems
+@subsection System-specific Problems
+
+@cindex AIX
+A linker bug on some versions of AIX 4.1 might prevent building
+when @code{g77} is built within @code{gcc}.
+It might also occur when building within @code{egcs}.
+@xref{LINKFAIL}.
+
+@node Cross-compiler Problems
+@subsection Cross-compiler Problems
+@cindex cross-compiler, problems
+
+@code{g77} has been in alpha testing since September of
+1992, and in public beta testing since February of 1995.
+Alpha testing was done by a small number of people worldwide on a fairly
+wide variety of machines, involving self-compilation in most or
+all cases.
+Beta testing has been done primarily via self-compilation,
+but in more and more cases, cross-compilation (and ``criss-cross
+compilation'', where a version of a compiler is built on one machine
+to run on a second and generate code that runs on a third) has
+been tried and has succeeded, to varying extents.
+
+Generally, @code{g77} can be ported to any configuration to which
+@code{gcc}, @code{f2c}, and @code{libf2c} can be ported and made
+to work together, aside from the known problems described in this
+manual.
+If you want to port @code{g77} to a particular configuration,
+you should first make sure @code{gcc} and @code{libf2c} can be
+ported to that configuration before focusing on @code{g77}, because
+@code{g77} is so dependent on them.
+
+Even for cases where @code{gcc} and @code{libf2c} work,
+you might run into problems with cross-compilation on certain machines,
+for several reasons.
+
+@itemize @bullet
+@item
+There is one known bug
+(a design bug to be fixed in 0.6) that prevents configuration of
+@code{g77} as a cross-compiler in some cases,
+though there are assumptions made during
+configuration that probably make doing non-self-hosting builds
+a hassle, requiring manual intervention.
+
+@item
+@code{gcc} might still have some trouble being configured
+for certain combinations of machines.
+For example, it might not know how to handle floating-point
+constants.
+
+@item
+Improvements to the way @code{libg2c} is built could make
+building @code{g77} as a cross-compiler easier---for example,
+passing and using @samp{$(LD)} and @samp{$(AR)} in the appropriate
+ways.
+(This is improved in the @code{egcs} version of @code{g77},
+especially as of version 1.1.)
+
+@item
+There are still some challenges putting together the right
+run-time libraries (needed by @code{libg2c}) for a target
+system, depending on the systems involved in the configuration.
+(This is a general problem with cross-compilation, and with
+@code{gcc} in particular.)
+@end itemize
+
+@node Settings
+@section Changing Settings Before Building
+
+Here are some internal @code{g77} settings that can be changed
+by editing source files in @file{gcc/f/} before building.
+
+This information, and perhaps even these settings, represent
+stop-gap solutions to problems people doing various ports
+of @code{g77} have encountered.
+As such, none of the following information is expected to
+be pertinent in future versions of @code{g77}.
+
+@menu
+* Larger File Unit Numbers::     Raising @samp{MXUNIT}.
+* Always Flush Output::          Synchronizing write errors.
+* Maximum Stackable Size::       Large arrays forced off the stack.
+* Floating-point Bit Patterns::  Possible programs building @code{g77}
+                                   as a cross-compiler.
+* Large Initialization::         Large arrays with @code{DATA}
+                                   initialization.
+* Alpha Problems Fixed::         Problems with 64-bit systems like
+                                   Alphas now fixed?
+@end menu
+
+@node Larger File Unit Numbers
+@subsection Larger File Unit Numbers
+@cindex MXUNIT
+@cindex unit numbers
+@cindex maximum unit number
+@cindex illegal unit number
+@cindex increasing maximum unit number
+
+As distributed, whether as part of @code{f2c} or @code{g77},
+@code{libf2c} accepts file unit numbers only in the range
+0 through 99.
+For example, a statement such as @samp{WRITE (UNIT=100)} causes
+a run-time crash in @code{libf2c}, because the unit number,
+100, is out of range.
+
+If you know that Fortran programs at your installation require
+the use of unit numbers higher than 99, you can change the
+value of the @samp{MXUNIT} macro, which represents the maximum unit
+number, to an appropriately higher value.
+
+To do this, edit the file @file{f/runtime/libI77/fio.h} in your
+@code{g77} source tree, changing the following line:
+
+@example
+#define MXUNIT 100
+@end example
+
+Change the line so that the value of @samp{MXUNIT} is defined to be
+at least one @emph{greater} than the maximum unit number used by
+the Fortran programs on your system.
+
+(For example, a program that does @samp{WRITE (UNIT=255)} would require
+@samp{MXUNIT} set to at least 256 to avoid crashing.)
+
+Then build or rebuild @code{g77} as appropriate.
+
+@emph{Note:} Changing this macro has @emph{no} effect on other limits
+your system might place on the number of files open at the same time.
+That is, the macro might allow a program to do @samp{WRITE (UNIT=100)},
+but the library and operating system underlying @code{libf2c} might
+disallow it if many other files have already been opened (via @code{OPEN} or
+implicitly via @code{READ}, @code{WRITE}, and so on).
+Information on how to increase these other limits should be found
+in your system's documentation.
+
+@node Always Flush Output
+@subsection Always Flush Output
+@cindex ALWAYS_FLUSH
+@cindex synchronous write errors
+@cindex disk full
+@cindex flushing output
+@cindex fflush()
+@cindex I/O, flushing
+@cindex output, flushing
+@cindex writes, flushing
+@cindex NFS
+@cindex network file system
+
+Some Fortran programs require output
+(writes) to be flushed to the operating system (under UNIX,
+via the @code{fflush()} library call) so that errors,
+such as disk full, are immediately flagged via the relevant
+@code{ERR=} and @code{IOSTAT=} mechanism, instead of such
+errors being flagged later as subsequent writes occur, forcing
+the previously written data to disk, or when the file is
+closed.
+
+Essentially, the difference can be viewed as synchronous error
+reporting (immediate flagging of errors during writes) versus
+asynchronous, or, more precisely, buffered error reporting
+(detection of errors might be delayed).
+
+@code{libg2c} supports flagging write errors immediately when
+it is built with the @samp{ALWAYS_FLUSH} macro defined.
+This results in a @code{libg2c} that runs slower, sometimes
+quite a bit slower, under certain circumstances---for example,
+accessing files via the networked file system NFS---but the
+effect can be more reliable, robust file I/O.
+
+If you know that Fortran programs requiring this level of precision
+of error reporting are to be compiled using the
+version of @code{g77} you are building, you might wish to
+modify the @code{g77} source tree so that the version of
+@code{libg2c} is built with the @samp{ALWAYS_FLUSH} macro
+defined, enabling this behavior.
+
+To do this, find this line in @file{f/runtime/f2c.h} in
+your @code{g77} source tree:
+
+@example
+/* #define ALWAYS_FLUSH */
+@end example
+
+Remove the leading @samp{/*@w{ }},
+so the line begins with @samp{#define},
+and the trailing @samp{@w{ }*/}.
+
+Then build or rebuild @code{g77} as appropriate.
+
+@node Maximum Stackable Size
+@subsection Maximum Stackable Size
+@vindex FFECOM_sizeMAXSTACKITEM
+@cindex code, stack variables
+@cindex maximum stackable size
+@cindex stack allocation
+@cindex segmentation violation
+@code{g77}, on most machines, puts many variables and arrays on the stack
+where possible, and can be configured (by changing
+@samp{FFECOM_sizeMAXSTACKITEM} in @file{gcc/f/com.c}) to force
+smaller-sized entities into static storage (saving
+on stack space) or permit larger-sized entities to be put on the
+stack (which can improve run-time performance, as it presents
+more opportunities for the GBE to optimize the generated code).
+
+@emph{Note:} Putting more variables and arrays on the stack
+might cause problems due to system-dependent limits on stack size.
+Also, the value of @samp{FFECOM_sizeMAXSTACKITEM} has no
+effect on automatic variables and arrays.
+@xref{But-bugs}, for more information.
+
+@node Floating-point Bit Patterns
+@subsection Floating-point Bit Patterns
+
+@cindex cross-compiler, building
+@cindex floating-point bit patterns
+@cindex bit patterns
+The @code{g77} build will crash if an attempt is made to build
+it as a cross-compiler
+for a target when @code{g77} cannot reliably determine the bit pattern of
+floating-point constants for the target.
+Planned improvements for version 0.6 of @code{g77}
+will give it the capabilities it needs to not have to crash the build
+but rather generate correct code for the target.
+(Currently, @code{g77}
+would generate bad code under such circumstances if it didn't crash
+during the build, e.g. when compiling a source file that does
+something like @samp{EQUIVALENCE (I,R)} and @samp{DATA R/9.43578/}.)
+
+@node Large Initialization
+@subsection Initialization of Large Aggregate Areas
+
+@cindex speed, compiler
+@cindex slow compiler
+@cindex memory utilization
+@cindex large initialization
+@cindex aggregate initialization
+A warning message is issued when @code{g77} sees code that provides
+initial values (e.g. via @code{DATA}) to an aggregate area (@code{COMMON}
+or @code{EQUIVALENCE}, or even a large enough array or @code{CHARACTER}
+variable)
+that is large enough to increase @code{g77}'s compile time by roughly
+a factor of 10.
+
+This size currently is quite small, since @code{g77}
+currently has a known bug requiring too much memory
+and time to handle such cases.
+In @file{gcc/f/data.c}, the macro
+@samp{FFEDATA_sizeTOO_BIG_INIT_} is defined
+to the minimum size for the warning to appear.
+The size is specified in storage units,
+which can be bytes, words, or whatever, on a case-by-case basis.
+
+After changing this macro definition, you must
+(of course) rebuild and reinstall @code{g77} for
+the change to take effect.
+
+Note that, as of version 0.5.18, improvements have
+reduced the scope of the problem for @emph{sparse}
+initialization of large arrays, especially those
+with large, contiguous uninitialized areas.
+However, the warning is issued at a point prior to
+when @code{g77} knows whether the initialization is sparse,
+and delaying the warning could mean it is produced
+too late to be helpful.
+
+Therefore, the macro definition should not be adjusted to
+reflect sparse cases.
+Instead, adjust it to generate the warning when densely
+initialized arrays begin to cause responses noticeably slower
+than linear performance would suggest.
+
+@node Alpha Problems Fixed
+@subsection Alpha Problems Fixed
+
+@cindex Alpha, support
+@cindex 64-bit systems
+@code{g77} used to warn when it was used to compile Fortran code
+for a target configuration that is not basically a 32-bit
+machine (such as an Alpha, which is a 64-bit machine, especially
+if it has a 64-bit operating system running on it).
+That was because @code{g77} was known to not work
+properly on such configurations.
+
+As of version 0.5.20, @code{g77} is believed to work well
+enough on such systems.
+So, the warning is no longer needed or provided.
+
+However, support for 64-bit systems, especially in
+areas such as cross-compilation and handling of
+intrinsics, is still incomplete.
+The symptoms
+are believed to be compile-time diagnostics rather
+than the generation of bad code.
+It is hoped that version 0.6 will completely support 64-bit
+systems.
+
+@node Quick Start
+@section Quick Start
+@cindex quick start
+
+@emph{Version info:}
+For @code{egcs} users, the following information is
+superceded by the @code{egcs} installation instructions.
+
+This procedure configures, builds, and installs @code{g77}
+``out of the box'' and works on most UNIX systems.
+Each command is identified by a unique number,
+used in the explanatory text that follows.
+For the most part, the output of each command is not shown,
+though indications of the types of responses are given in a
+few cases.
+
+To perform this procedure, the installer must be logged
+in as user @code{root}.
+Much of it can be done while not logged in as @code{root},
+and users experienced with UNIX administration should be
+able to modify the procedure properly to do so.
+
+Following traditional UNIX conventions, it is assumed that
+the source trees for @code{g77} and @code{gcc} will be
+placed in @file{/usr/src}.
+It also is assumed that the source distributions themselves
+already reside in @file{/usr/FSF}, a naming convention
+used by the author of @code{g77} on his own system:
+
+@example
+/usr/FSF/gcc-@value{version-gcc}.tar.gz
+/usr/FSF/g77-@value{version-g77}.tar.gz
+@end example
+
+@c (You can use @file{gcc-2.7.2.1.tar.gz} instead, or
+@c the equivalent of it obtained by applying the
+@c patch distributed as @file{gcc-2.7.2-2.7.2.1.diff.gz}
+@c to version 2.7.2 of @code{gcc},
+@c if you remember to make the appropriate adjustments in the
+@c instructions below.)
+
+@c @cindex SunOS4
+@c Users of the following systems should not blindly follow
+@c these quick-start instructions, because of problems their
+@c systems have coping with straightforward installation of
+@c @code{g77}:
+@c 
+@c @itemize @bullet
+@c @item
+@c SunOS4
+@c @end itemize
+@c 
+@c Instead, see @ref{Complete Installation}, for detailed information
+@c on how to configure, build, and install @code{g77} for your
+@c particular system.
+@c Also, see @ref{Trouble,,Known Causes of Trouble with GNU Fortran},
+@c for information on bugs and other problems known to afflict the
+@c installation process, and how to report newly discovered ones.
+@c 
+@c If your system is @emph{not} on the above list, and @emph{is}
+@c a UNIX system or one of its variants, you should be able to
+@c follow the instructions below.
+
+If you vary @emph{any} of the steps below, you might run into
+trouble, including possibly breaking existing programs for
+other users of your system.
+Before doing so, it is wise to review the explanations of some
+of the steps.
+These explanations follow this list of steps.
+
+@example
+sh[ 1]# @kbd{cd /usr/src}
+@set source-dir 1
+sh[ 2]# @kbd{gunzip -c < /usr/FSF/gcc-@value{version-gcc}.tar.gz | tar xf -}
+[Might say "Broken pipe"...that is normal on some systems.]
+@set unpack-gcc 2
+sh[ 3]# @kbd{gunzip -c < /usr/FSF/g77-@value{version-g77}.tar.gz | tar xf -}
+["Broken pipe" again possible.]
+@set unpack-g77 3
+sh[ 4]# @kbd{ln -s gcc-@value{version-gcc} gcc}
+@set link-gcc 4
+sh[ 5]# @kbd{ln -s g77-@value{version-g77} g77}
+@set link-g77 5
+sh[ 6]# @kbd{mv -i g77/* gcc}
+[No questions should be asked by mv here; or, you made a mistake.]
+@set merge-g77 6
+sh[ 7]# @kbd{cd gcc}
+sh[ 8]# @kbd{./configure --prefix=/usr}
+[Do not do the above if gcc is not installed in /usr/bin.
+You might need a different @kbd{--prefix=@dots{}}, as
+described below.]
+@set configure-gcc 8
+sh[ 9]# @kbd{make bootstrap}
+[This takes a long time, and is where most problems occur.]
+@set build-gcc 9
+sh[10]# @kbd{make compare}
+[This verifies that the compiler is `sane'.
+If any files are printed, you have likely found a g77 bug.]
+@set compare-gcc 10
+sh[11]# @kbd{rm -fr stage1}
+@set rm-stage1 11
+sh[12]# @kbd{make -k install}
+[The actual installation.]
+@set install-g77 12
+sh[13]# @kbd{g77 -v}
+[Verify that g77 is installed, obtain version info.]
+@set show-version 13
+sh[14]#
+@set end-procedure 14
+@end example
+
+@xref{Updating Documentation,,Updating Your Info Directory}, for
+information on how to update your system's top-level @code{info}
+directory to contain a reference to this manual, so that
+users of @code{g77} can easily find documentation instead
+of having to ask you for it.
+
+Elaborations of many of the above steps follows:
+
+@table @asis
+@item Step @value{source-dir}: @kbd{cd /usr/src}
+You can build @code{g77} pretty much anyplace.
+By convention, this manual assumes @file{/usr/src}.
+It might be helpful if other users on your system
+knew where to look for the source code for the
+installed version of @code{g77} and @code{gcc} in any case.
+
+@c @item Step @value{unpack-gcc}: @kbd{gunzip -d @dots{}}
+@c Here, you might wish to use @file{gcc-2.7.2.1.tar.gz}
+@c instead, or apply @file{gcc-2.7.2-2.7.2.1.diff.gz} to achieve
+@c similar results.
+
+@item Step @value{unpack-g77}: @kbd{gunzip -d < /usr/FSF/g77-@value{version-g77}.tar.gz | tar xf -}
+It is not always necessary to obtain the latest version of
+@code{g77} as a complete @file{.tar.gz} file if you have
+a complete, earlier distribution of @code{g77}.
+If appropriate, you can unpack that earlier
+version of @code{g77}, and then apply the appropriate patches
+to achieve the same result---a source tree containing version
+@value{version-g77} of @code{g77}.
+
+@item Step @value{link-gcc}: @kbd{ln -s gcc-@value{version-gcc} gcc}
+@item Step @value{link-g77}: @kbd{ln -s g77-@value{version-g77} g77}
+These commands mainly help reduce typing,
+and help reduce visual clutter in examples
+in this manual showing what to type to install @code{g77}.
+
+@c Of course, if appropriate, @kbd{ln -s gcc-2.7.2.1 gcc} or
+@c similar.
+
+@xref{Unpacking}, for information on
+using distributions of @code{g77} made by organizations
+other than the FSF.
+
+@item Step @value{merge-g77}: @kbd{mv -i g77/* gcc}
+After doing this, you can, if you like, type
+@samp{rm g77} and @samp{rmdir g77-@value{version-g77}} to remove
+the empty directory and the symbol link to it.
+But, it might be helpful to leave them around as
+quick reminders of which version(s) of @code{g77} are
+installed on your system.
+
+@xref{Unpacking}, for information
+on the contents of the @file{g77} directory (as merged
+into the @file{gcc} directory).
+
+@item Step @value{configure-gcc}: @kbd{./configure --prefix=/usr}
+This is where you specify that
+the @file{g77} and @file{gcc} executables are to be
+installed in @file{/usr/bin/},
+the @code{g77} and @code{gcc} documentation is
+to be installed in @file{/usr/info/} and @file{/usr/man/},
+and so on.
+
+You should ensure that any existing installation of the @file{gcc}
+executable is in @file{/usr/bin/}.
+
+However, if that existing version of @code{gcc} is not @value{version-gcc},
+or if you simply wish to avoid risking overwriting it with a
+newly built copy of the same version,
+you can specify @samp{--prefix=/usr/local}
+(which is the default)
+or some other path,
+and invoke the newly installed version
+directly from that path's @file{bin} directory.
+
+@xref{Where to Install,,Where in the World Does Fortran (and GNU CC) Go?},
+for more information on determining where to install @code{g77}.
+@xref{Configuring gcc}, for more information on the
+configuration process triggered by invoking the @file{./configure}
+script.
+
+@item Step @value{build-gcc}: @kbd{make bootstrap}
+@xref{Installation,,Installing GNU CC,
+gcc,Using and Porting GNU CC}, for information
+on the kinds of diagnostics you should expect during
+this procedure.
+
+@xref{Building gcc}, for complete @code{g77}-specific
+information on this step.
+
+@item Step @value{compare-gcc}: @kbd{make compare}
+@xref{Bug Lists,,Where to Port Bugs}, for information
+on where to report that you observed files
+having different contents during this
+phase.
+
+@xref{Bug Reporting,,How to Report Bugs}, for
+information on @emph{how} to report bugs like this.
+
+@item Step @value{rm-stage1}: @kbd{rm -fr stage1}
+You don't need to do this, but it frees up disk space.
+
+@item Step @value{install-g77}: @kbd{make -k install}
+If this doesn't seem to work, try:
+
+@example
+make -k install install-libf77
+@end example
+
+Or, make sure you're using GNU @code{make}.
+
+@xref{Installation of Binaries}, for more information.
+
+@xref{Updating Documentation,,Updating Your Info Directory},
+for information on entering this manual into your
+system's list of texinfo manuals.
+
+@item Step @value{show-version}: @kbd{g77 -v}
+If this command prints approximately 25 lines of output,
+including the GNU Fortran Front End version number (which
+should be the same as the version number for the version
+of @code{g77} you just built and installed) and the
+version numbers for the three parts of the @code{libf2c}
+library (@code{libF77}, @code{libI77}, @code{libU77}), and
+those version numbers are all in agreement, then there is
+a high likelihood that the installation has been successfully
+completed.
+
+You might consider doing further testing.
+For example, log in as a non-privileged user, then create
+a small Fortran program, such as:
+
+@example
+      PROGRAM SMTEST
+      DO 10 I=1, 10
+         PRINT *, 'Hello World #', I
+10    CONTINUE
+      END
+@end example
+
+Compile, link, and run the above program, and, assuming you named
+the source file @file{smtest.f}, the session should look like this:
+
+@example
+sh# @kbd{g77 -o smtest smtest.f}
+sh# @kbd{./smtest}
+ Hello World # 1
+ Hello World # 2
+ Hello World # 3
+ Hello World # 4
+ Hello World # 5
+ Hello World # 6
+ Hello World # 7
+ Hello World # 8
+ Hello World # 9
+ Hello World # 10
+sh#
+@end example
+
+If invoking @code{g77} doesn't seem to work,
+the problem might be that you've installed it in
+a location that is not in your shell's search path.
+For example, if you specified @samp{--prefix=/gnu},
+and @file{/gnu/bin} is not in your @code{PATH}
+environment variable,
+you must explicitly specify the location of the compiler
+via @kbd{/gnu/bin/g77 -o smtest smtest.f}.
+
+After proper installation, you don't
+need to keep your gcc and g77 source and build directories
+around anymore.
+Removing them can free up a lot of disk space.
+@end table
+
+@node Complete Installation
+@section Complete Installation
+
+@emph{Version info:}
+For @code{egcs} users, the following information is
+mostly superceded by the @code{egcs} installation instructions.
+
+Here is the complete @code{g77}-specific information on how
+to configure, build, and install @code{g77}.
+
+@menu
+* Unpacking::
+* Merging Distributions::
+* Where to Install::
+* Configuring gcc::
+* Building gcc::
+* Pre-installation Checks::
+* Installation of Binaries::
+* Updating Documentation::
+* Missing tools?::
+@end menu
+
+@node Unpacking
+@subsection Unpacking
+@cindex unpacking distributions
+@cindex distributions, unpacking
+@cindex code, source
+@cindex source code
+@cindex source tree
+@cindex packages
+
+The @code{gcc} source distribution is a stand-alone distribution.
+It is designed to be unpacked (producing the @code{gcc}
+source tree) and built as is, assuming certain
+prerequisites are met (including the availability of compatible
+UNIX programs such as @code{make}, @code{cc}, and so on).
+
+However, before building @code{gcc}, you will want to unpack
+and merge the @code{g77} distribution in with it, so that you
+build a Fortran-capable version of @code{gcc}, which includes
+the @code{g77} command, the necessary run-time libraries,
+and this manual.
+
+Unlike @code{gcc}, the @code{g77} source distribution
+is @emph{not} a stand-alone distribution.
+It is designed to be unpacked and, afterwards, immediately merged
+into an applicable @code{gcc} source tree.
+That is, the @code{g77} distribution @emph{augments} a
+@code{gcc} distribution---without @code{gcc}, generally
+only the documentation is immediately usable.
+
+A sequence of commands typically used to unpack @code{gcc}
+and @code{g77} is:
+
+@example
+sh# @kbd{cd /usr/src}
+sh# @kbd{gunzip -c /usr/FSF/gcc-@value{version-gcc}.tar.gz | tar xf -}
+sh# @kbd{gunzip -c /usr/FSF/g77-@value{version-g77}.tar.gz | tar xf -}
+sh# @kbd{ln -s gcc-@value{version-gcc} gcc}
+sh# @kbd{ln -s g77-@value{version-g77} g77}
+sh# @kbd{mv -i g77/* gcc}
+@end example
+
+@emph{Notes:} The commands beginning with @samp{gunzip@dots{}} might
+print @samp{Broken pipe@dots{}} as they complete.
+That is nothing to worry about, unless you actually
+@emph{hear} a pipe breaking.
+The @code{ln} commands are helpful in reducing typing
+and clutter in installation examples in this manual.
+Hereafter, the top level of @code{gcc} source tree is referred to
+as @file{gcc}, and the top level of just the @code{g77}
+source tree (prior to issuing the @code{mv} command, above)
+is referred to as @file{g77}.
+
+There are three top-level names in a @code{g77} distribution:
+
+@example
+g77/COPYING.g77
+g77/README.g77
+g77/f
+@end example
+
+All three entries should be moved (or copied) into a @code{gcc}
+source tree (typically named after its version number and
+as it appears in the FSF distributions---e.g. @file{gcc-@value{version-gcc}}).
+
+@file{g77/f} is the subdirectory containing all of the
+code, documentation, and other information that is specific
+to @code{g77}.
+The other two files exist to provide information on @code{g77}
+to someone encountering a @code{gcc} source tree with @code{g77}
+already present, who has not yet read these installation
+instructions and thus needs help understanding that the
+source tree they are looking at does not come from a single
+FSF distribution.
+They also help people encountering an unmerged @code{g77} source
+tree for the first time.
+
+@cindex modifying @code{g77}
+@cindex code, modifying
+@cindex Pentium optimizations
+@cindex optimizations, Pentium
+@emph{Note:} Please use @strong{only} @code{gcc} and @code{g77}
+source trees as distributed by the FSF.
+Use of modified versions is likely to result in problems that appear to be
+in the @code{g77} code but, in fact, are not.
+Do not use such modified versions
+unless you understand all the differences between them and the versions
+the FSF distributes---in which case you should be able to modify the
+@code{g77} (or @code{gcc}) source trees appropriately so @code{g77}
+and @code{gcc} can coexist as they do in the stock FSF distributions.
+
+@node Merging Distributions
+@subsection Merging Distributions
+@cindex merging distributions
+@cindex @code{gcc} versions supported by @code{g77}
+@cindex versions of @code{gcc}
+@cindex support for @code{gcc} versions
+
+After merging the @code{g77} source tree into the @code{gcc} source tree,
+you have put together a complete @code{g77} source tree.
+
+@cindex gcc version numbering
+@cindex version numbering
+@cindex g77 version number
+@cindex GNU version numbering
+As of version 0.5.23, @code{g77} no longer modifies
+the version number of @code{gcc},
+nor does it patch @code{gcc} itself.
+
+@code{g77} still depends on being merged with an
+appropriate version of @code{gcc}.
+For version @value{version-g77} of @code{g77},
+the specific version of @code{gcc} supported is @value{version-gcc}.
+
+However, other versions of @code{gcc} might be suitable
+``hosts'' for this version of @code{g77}.
+
+GNU version numbers make it easy to figure out whether a
+particular version of a distribution is newer or older than
+some other version of that distribution.
+The format is,
+generally, @var{major}.@var{minor}.@var{patch}, with
+each field being a decimal number.
+(You can safely ignore
+leading zeros; for example, 1.5.3 is the same as 1.5.03.)
+The @var{major} field only increases with time.
+The other two fields are reset to 0 when the field to
+their left is incremented; otherwise, they, too, only
+increase with time.
+So, version 2.6.2 is newer than version 2.5.8, and
+version 3.0 is newer than both.
+(Trailing @samp{.0} fields often are omitted in
+announcements and in names for distributions and
+the directories they create.)
+
+If your version of @code{gcc} is older than the oldest version
+supported by @code{g77}
+(as casually determined by listing the contents of @file{gcc/f/INSTALL/},
+which contains these installation instructions in plain-text format),
+you should obtain a newer, supported version of @code{gcc}.
+(You could instead obtain an older version of @code{g77},
+or try and get your @code{g77} to work with the old
+@code{gcc}, but neither approach is recommended, and
+you shouldn't bother reporting any bugs you find if you
+take either approach, because they're probably already
+fixed in the newer versions you're not using.)
+
+If your version of @code{gcc} is newer than the newest version
+supported by @code{g77}, it is possible that your @code{g77}
+will work with it anyway.
+If the version number for @code{gcc} differs only in the
+@var{patch} field, you might as well try that version of @code{gcc}.
+Since it has the same @var{major} and @var{minor} fields,
+the resulting combination is likely to work.
+
+So, for example, if a particular version of @code{g77} has support for
+@code{gcc} versions 2.8.0 and 2.8.1,
+it is likely that @file{gcc-2.8.2} would work well with @code{g77}.
+
+However, @file{gcc-2.9.0} would almost certainly
+not work with that version of @code{g77}
+without appropriate modifications,
+so a new version of @code{g77} would be needed (and you should
+wait for it rather than bothering the maintainers---@pxref{Changes,,
+User-Visible Changes}).
+
+@cindex distributions, why separate
+@cindex separate distributions
+@cindex why separate distributions
+This complexity is the result of @code{gcc} and @code{g77} being
+separate distributions.
+By keeping them separate, each product is able to be independently
+improved and distributed to its user base more frequently.
+
+However, the GBE interface defined by @code{gcc} typically
+undergoes some incompatible changes at least every time the
+@var{minor} field of the version number is incremented,
+and such changes require corresponding changes to
+the @code{g77} front end (FFE).
+
+@c @pindex config-lang.in
+@c @emph{Note:} @code{g77}'s configuration file @file{gcc/f/config-lang.in}
+@c sometimes ensures that the source code for the version of @code{gcc}
+@c being configured has at least one indication of being an appropriate
+@c version as required specifically by @code{g77}.
+@c This configuration-time
+@c checking should catch failures to use the proper version of @code{gcc} and,
+@c if so caught, should abort the configuration with an explanation.
+@c @emph{Please} do not try to disable this check,
+@c otherwise @code{g77} might well appear to build
+@c and install correctly, and even appear to compile correctly,
+@c but could easily produce broken code.
+
+@node Where to Install
+@subsection Where in the World Does Fortran (and GNU CC) Go?
+@cindex language f77 not recognized
+@cindex gcc will not compile Fortran programs
+
+Before configuring, you should make sure you know
+where you want the @code{g77} and @code{gcc}
+binaries to be installed after they're built,
+because this information is given to the configuration
+tool and used during the build itself.
+
+A @code{g77} installation normally includes installation of
+a Fortran-aware version of @code{gcc}, so that the @code{gcc}
+command recognizes Fortran source files and knows how to compile
+them.
+
+For this to work, the version of @code{gcc} that you will be building
+as part of @code{g77} @strong{must} be installed as the ``active''
+version of @code{gcc} on the system.
+
+Sometimes people make the mistake of installing @code{gcc} as
+@file{/usr/local/bin/gcc},
+leaving an older, non-Fortran-aware version in @file{/usr/bin/gcc}.
+(Or, the opposite happens.)
+This can result in @code{gcc} being unable to compile Fortran
+source files,
+because when the older version of @code{gcc} is invoked,
+it complains that it does not
+recognize the language, or the file name suffix.
+
+So, determine whether @code{gcc} already is installed on your system,
+and, if so, @emph{where} it is installed, and prepare to configure the
+new version of @code{gcc} you'll be building so that it installs
+over the existing version of @code{gcc}.
+
+You might want to back up your existing copy of @file{/usr/bin/gcc}, and
+the entire @file{/usr/lib} directory, before
+you perform the actual installation (as described in this manual).
+
+Existing @code{gcc} installations typically are
+found in @file{/usr} or @file{/usr/local}.
+(This means the commands are installed in @file{/usr/bin} or
+@file{/usr/local/bin},
+the libraries in @file{/usr/lib} or @file{/usr/local/lib},
+and so on.)
+
+If you aren't certain where the currently
+installed version of @code{gcc} and its
+related programs reside, look at the output
+of this command:
+
+@example
+gcc -v -o /tmp/delete-me -xc /dev/null -xnone
+@end example
+
+All sorts of interesting information on the locations of various
+@code{gcc}-related programs and data files should be visible
+in the output of the above command.
+(The output also is likely to include a diagnostic from
+the linker, since there's no @samp{main_()} function.)
+However, you do have to sift through it yourself; @code{gcc}
+currently provides no easy way to ask it where it is installed
+and where it looks for the various programs and data files it
+calls on to do its work.
+
+Just @emph{building} @code{g77} should not overwrite any installed
+programs---but, usually, after you build @code{g77}, you will want
+to install it, so backing up anything it might overwrite is
+a good idea.
+(This is true for any package, not just @code{g77},
+though in this case it is intentional that @code{g77} overwrites
+@code{gcc} if it is already installed---it is unusual that
+the installation process for one distribution intentionally
+overwrites a program or file installed by another distribution,
+although, in this case, @code{g77} is an augmentation of the
+@code{gcc} distribution.)
+
+Another reason to back up the existing version first,
+or make sure you can restore it easily, is that it might be
+an older version on which other users have come to depend
+for certain behaviors.
+However, even the new version of @code{gcc} you install
+will offer users the ability to specify an older version of
+the actual compilation programs if desired, and these
+older versions need not include any @code{g77} components.
+@xref{Target Options,,Specifying Target Machine and Compiler Version,
+gcc,Using and Porting GNU CC}, for information on the @samp{-V}
+option of @code{gcc}.
+
+@node Configuring gcc
+@subsection Configuring GNU CC
+
+@code{g77} is configured automatically when you configure
+@code{gcc}.
+There are two parts of @code{g77} that are configured in two
+different ways---@code{g77}, which ``camps on'' to the
+@code{gcc} configuration mechanism, and @code{libg2c}, which
+uses a variation of the GNU @code{autoconf} configuration
+system.
+
+Generally, you shouldn't have to be concerned with
+either @code{g77} or @code{libg2c} configuration, unless
+you're configuring @code{g77} as a cross-compiler.
+In this case, the @code{libg2c} configuration, and possibly the
+@code{g77} and @code{gcc} configurations as well,
+might need special attention.
+(This also might be the case if you're porting @code{gcc} to
+a whole new system---even if it is just a new operating system
+on an existing, supported CPU.)
+
+To configure the system, see
+@ref{Installation,,Installing GNU CC,gcc,Using and Porting GNU CC},
+following the instructions for running @file{./configure}.
+Pay special attention to the @samp{--prefix=} option, which
+you almost certainly will need to specify.
+
+(Note that @code{gcc} installation information is provided
+as a plain-text file in @file{gcc/INSTALL}.)
+
+The information printed by the invocation of @file{./configure}
+should show that the @file{f} directory (the Fortran language)
+has been configured.
+If it does not, there is a problem.
+
+@emph{Note:} Configuring with the @samp{--srcdir} argument,
+or by starting in an empty directory
+and typing a command such as @kbd{../gcc/configure} to
+build with separate build and source directories,
+is known to work with GNU @code{make},
+but it is known to not work with other variants of @code{make}.
+Irix5.2 and SunOS4.1 versions of @code{make} definitely
+won't work outside the source directory at present.
+
+@code{g77}'s portion of the @file{configure} script
+used to issue a warning message about this
+when configuring for building binaries outside the source directory,
+but no longer does this as of version 0.5.23.
+
+Instead, @code{g77} simply rejects most common attempts
+to build it using a non-GNU @code{make} when the
+build directory is not the same as the source directory,
+issuing an explanatory diagnostic.
+
+@node Building gcc
+@subsection Building GNU CC
+@cindex building @code{gcc}
+@cindex building @code{g77}
+
+@vindex LANGUAGES
+Building @code{g77} requires building enough of @code{gcc} that
+these instructions assume you're going to build all of
+@code{gcc}, including @code{g++}, @code{protoize}, and so on.
+You can save a little time and disk space by changes the
+@samp{LANGUAGES} macro definition in @code{gcc/Makefile.in}
+or @code{gcc/Makefile}, but if you do that, you're on your own.
+One change is almost @emph{certainly} going to cause failures:
+removing @samp{c} or @samp{f77} from the definition of the
+@samp{LANGUAGES} macro.
+
+After configuring @code{gcc}, which configures @code{g77} and
+@code{libg2c} automatically, you're ready to start the actual
+build by invoking @code{make}.
+
+@pindex configure
+@emph{Note:} You @strong{must} have run the @file{configure}
+script in @code{gcc} before you run @code{make},
+even if you're using an already existing @code{gcc} development directory,
+because @file{./configure} does the work to recognize that you've added
+@code{g77} to the configuration.
+
+There are two general approaches to building GNU CC from
+scratch:
+
+@table @dfn
+@item bootstrap
+This method uses minimal native system facilities to
+build a barebones, unoptimized @code{gcc}, that is then
+used to compile (``bootstrap'') the entire system.
+
+@item straight
+This method assumes a more complete native system
+exists, and uses that just once to build the entire
+system.
+@end table
+
+On all systems without a recent version of @code{gcc}
+already installed, the @i{bootstrap} method must be
+used.
+In particular, @code{g77} uses extensions to the C
+language offered, apparently, only by @code{gcc}.
+
+On most systems with a recent version of @code{gcc}
+already installed, the @i{straight} method can be
+used.
+This is an advantage, because it takes less CPU time
+and disk space for the build.
+However, it does require that the system have fairly
+recent versions of many GNU programs and other
+programs, which are not enumerated here.
+
+@menu
+* Bootstrap Build::  For all systems.
+* Straight Build::   For systems with a recent version of @code{gcc}.
+@end menu
+
+@node Bootstrap Build
+@subsubsection Bootstrap Build
+@cindex bootstrap build
+@cindex build, bootstrap
+
+A complete bootstrap build is done by issuing a command
+beginning with @samp{make bootstrap @dots{}}, as
+described in @ref{Installation,,Installing GNU CC,
+gcc,Using and Porting GNU CC}.
+This is the most reliable form of build, but it does require
+the most disk space and CPU time, since the complete system
+is built twice (in Stages 2 and 3), after an initial build
+(during Stage 1) of a minimal @code{gcc} compiler using
+the native compiler and libraries.
+
+You might have to, or want to, control the way a bootstrap
+build is done by entering the @code{make} commands to build
+each stage one at a time, as described in the @code{gcc}
+manual.
+For example, to save time or disk space, you might want
+to not bother doing the Stage 3 build, in which case you
+are assuming that the @code{gcc} compiler you have built
+is basically sound (because you are giving up the opportunity
+to compare a large number of object files to ensure they're
+identical).
+
+To save some disk space during installation, after Stage 2
+is built, you can type @samp{rm -fr stage1} to remove the
+binaries built during Stage 1.
+
+Also, @xref{Installation,,Installing GNU CC,gcc,Using and Porting GNU CC},
+for important information on building @code{gcc} that is
+not described in this @code{g77} manual.
+For example, explanations of diagnostic messages
+and whether they're expected, or indicate trouble,
+are found there.
+
+@node Straight Build
+@subsubsection Straight Build
+@cindex straight build
+@cindex build, straight
+
+If you have a recent version of @code{gcc}
+already installed on your system, and if you're
+reasonably certain it produces code that is
+object-compatible with the version of @code{gcc}
+you want to build as part of building @code{g77},
+you can save time and disk space by doing a straight
+build.
+
+To build just the compilers along with the
+necessary run-time libraries, issue the following
+command:
+
+@example
+make -k CC=gcc
+@end example
+
+If you run into problems using this method, you have
+two options:
+
+@itemize @bullet
+@item
+Abandon this approach and do a bootstrap build.
+
+@item
+Try to make this approach work by diagnosing the
+problems you're running into and retrying.
+@end itemize
+
+Especially if you do the latter, you might consider
+submitting any solutions as bug/fix reports.
+@xref{Trouble,,Known Causes of Trouble with GNU Fortran}.
+
+However, understand that many problems preventing a
+straight build from working are not @code{g77} problems,
+and, in such cases, are not likely to be addressed in
+future versions of @code{g77}.
+Consider treating them as @code{gcc} bugs instead.
+
+@node Pre-installation Checks
+@subsection Pre-installation Checks
+@cindex pre-installation checks
+@cindex installing, checking before
+
+Before installing the system, which includes installing
+@code{gcc}, you might want to do some minimum checking
+to ensure that some basic things work.
+
+Here are some commands you can try, and output typically
+printed by them when they work:
+
+@example
+sh# @kbd{cd /usr/src/gcc}
+sh# @kbd{./g77 -B./ -v}
+g77 version @value{version-g77}
+Driving: ./g77 -B./ -v -c -xf77-version /dev/null -xnone
+Reading specs from ./specs
+gcc version @value{version-gcc}
+ cpp -lang-c -v -isystem ./include -undef -D__GNUC__=2 @dots{}
+GNU CPP version @value{version-gcc} (Alpha GNU/Linux with ELF)
+#include "..." search starts here:
+#include <...> search starts here:
+ include
+ /usr/alpha-linux/include
+ /usr/lib/gcc-lib/alpha-linux/@value{version-gcc}/include
+ /usr/include
+End of search list.
+ ./f771 -fnull-version -quiet -dumpbase g77-version.f -version @dots{}
+GNU F77 version @value{version-gcc} (alpha-linux) compiled @dots{}
+GNU Fortran Front End version @value{version-g77}
+ as -nocpp -o /tmp/cca14485.o /tmp/cca14485.s
+ ld -m elf64alpha -G 8 -O1 -dynamic-linker /lib/ld-linux.so.2 @dots{}
+ /tmp/cca14485
+__G77_LIBF77_VERSION__: @value{version-g77}
+@@(#)LIBF77 VERSION 19970919
+__G77_LIBI77_VERSION__: @value{version-g77}
+@@(#) LIBI77 VERSION pjw,dmg-mods 19980405
+__G77_LIBU77_VERSION__: @value{version-g77}
+@@(#) LIBU77 VERSION 19970919
+sh# @kbd{./xgcc -B./ -v -o /tmp/delete-me -xc /dev/null -xnone}
+Reading specs from ./specs
+gcc version @value{version-gcc}
+ ./cpp -lang-c -v -isystem ./include -undef @dots{}
+GNU CPP version @value{version-gcc} (Alpha GNU/Linux with ELF)
+#include "..." search starts here:
+#include <...> search starts here:
+ include
+ /usr/alpha-linux/include
+ /usr/lib/gcc-lib/alpha-linux/@value{version-gcc}/include
+ /usr/include
+End of search list.
+ ./cc1 /tmp/cca18063.i -quiet -dumpbase null.c -version @dots{}
+GNU C version @value{version-gcc} (alpha-linux) compiled @dots{}
+ as -nocpp -o /tmp/cca180631.o /tmp/cca18063.s
+ ld -m elf64alpha -G 8 -O1 -dynamic-linker /lib/ld-linux.so.2 @dots{}
+/usr/lib/crt1.o: In function `_start':
+../sysdeps/alpha/elf/start.S:77: undefined reference to `main'
+../sysdeps/alpha/elf/start.S:77: undefined reference to `main'
+sh#
+@end example
+
+(Note that long lines have been truncated, and @samp{@dots{}}
+used to indicate such truncations.)
+
+The above two commands test whether @code{g77} and @code{gcc},
+respectively, are able to compile empty (null) source files,
+whether invocation of the C preprocessor works, whether libraries
+can be linked, and so on.
+
+If the output you get from either of the above two commands
+is noticeably different, especially if it is shorter or longer
+in ways that do not look consistent with the above sample
+output, you probably should not install @code{gcc} and @code{g77}
+until you have investigated further.
+
+For example, you could try compiling actual applications and
+seeing how that works.
+(You might want to do that anyway, even if the above tests
+work.)
+
+To compile using the not-yet-installed versions of @code{gcc}
+and @code{g77}, use the following commands to invoke them.
+
+To invoke @code{g77}, type:
+
+@example
+/usr/src/gcc/g77 -B/usr/src/gcc/ @dots{}
+@end example
+
+To invoke @code{gcc}, type:
+
+@example
+/usr/src/gcc/xgcc -B/usr/src/gcc/ @dots{}
+@end example
+
+@node Installation of Binaries
+@subsection Installation of Binaries
+@cindex installation of binaries
+@cindex @code{g77}, installation of
+@cindex @code{gcc}, installation of
+
+After configuring, building, and testing @code{g77} and @code{gcc},
+when you are ready to install them on your system, type:
+
+@example
+make -k CC=gcc install
+@end example
+
+As described in @ref{Installation,,Installing GNU CC,
+gcc,Using and Porting GNU CC}, the values for
+the @samp{CC} and @samp{LANGUAGES} macros should
+be the same as those you supplied for the build
+itself.
+
+So, the details of the above command might vary
+if you used a bootstrap build (where you might be
+able to omit both definitions, or might have to
+supply the same definitions you used when building
+the final stage) or if you deviated from the
+instructions for a straight build.
+
+If the above command does not install @file{libg2c.a}
+as expected, try this:
+
+@example
+make -k @dots{} install install-libf77
+@end example
+
+We don't know why some non-GNU versions of @code{make} sometimes
+require this alternate command, but they do.
+(Remember to supply the appropriate definition for @samp{CC}
+where you see @samp{@dots{}} in the above command.)
+
+Note that using the @samp{-k} option tells @code{make} to
+continue after some installation problems, like not having
+@code{makeinfo} installed on your system.
+It might not be necessary for your system.
+
+@emph{Note:} @code{g77} no longer installs
+files not directly part of @code{g77},
+such as @file{/usr/bin/f77}, @file{/usr/lib/libf2c.a},
+and @file{/usr/include/f2c.h}, or their
+@file{/usr/local} equivalents.
+
+@xref{Distributing Binaries}, for information on
+how to accommodate systems with no existing non-@code{g77}
+@code{f77} compiler and systems with @code{f2c} installed.
+
+@node Updating Documentation
+@subsection Updating Your Info Directory
+@cindex updating info directory
+@cindex info, updating directory
+@cindex directory, updating info
+@pindex /usr/info/dir
+@pindex g77.info
+@cindex texinfo
+@cindex documentation
+
+As part of installing @code{g77}, you should make sure users
+of @code{info} can easily access this manual on-line.
+
+@code{g77} does this automatically by
+invoking the @code{install-info} command
+when you use @samp{make install} to install @code{g77}.
+
+If that fails, or if the @code{info} directory
+it updates is not the one normally accessed by users,
+consider invoking it yourself.
+For example:
+
+@smallexample
+install-info --info-dir=/usr/info /usr/info/g77.info
+@end smallexample
+
+The above example assumes the @code{g77} documentation
+already is installed in @file{/usr/info}
+and that @file{/usr/info/dir} is the file
+you wish to update.
+Adjust the command accordingly,
+if those assumptions are wrong.
+
+@node Missing tools?
+@subsection Missing tools?
+@cindex command missing
+@cindex command not found
+@cindex file not found
+@cindex not found
+
+A build of @code{gcc} might fail due to one or more tools
+being called upon by @code{make}
+(during the build or install process),
+when those tools are not installed on your system.
+
+This situation can result from any of the following actions
+(performed by you or someone else):
+
+@itemize @bullet
+@item
+Changing the source code or documentation yourself
+(as a developer or technical writer).
+
+@item
+Applying a patch that changes the source code or documentation
+(including, sometimes, the official patches distributed by
+the FSF).
+
+@item
+Deleting the files that are created by the (missing) tools.
+
+The @samp{make maintainer-clean} command is supposed
+to delete these files, so invoking this command without
+having all the appropriate tools installed is not recommended.
+
+@item
+Creating the source directory using a method that
+does not preserve the date-time-modified information
+in the original distribution.
+
+For example, the UNIX @samp{cp -r} command copies a
+directory tree without preserving the date-time-modified
+information.
+Use @samp{cp -pr} instead.
+@end itemize
+
+The reason these activities cause @code{make} to try and
+invoke tools that it probably wouldn't when building
+from a perfectly ``clean'' source directory containing
+@code{gcc} and @code{g77} is that some files in the
+source directory (and the corresponding distribution)
+aren't really source files, but @emph{derived} files
+that are produced by running tools with the corresponding
+source files as input.
+These derived files @dfn{depend}, in @code{make} terminology,
+on the corresponding source files.
+
+@code{make} determines that a file that depends on another
+needs to be updated if the date-time-modified information for
+the source file shows that it is newer than the corresponding
+information for the derived file.
+
+If it makes that determination, @code{make} runs the appropriate
+commands (specified in the ``Makefile'') to update the
+derived file, and this process typically calls upon one or
+more installed tools to do the work.
+
+The ``safest'' approach to dealing with this situation
+is to recreate the @code{gcc} and @code{g77} source
+directories from complete @code{gcc} and @code{g77} distributions
+known to be provided by the FSF.
+
+Another fairly ``safe'' approach is to simply install
+the tools you need to complete the build process.
+This is especially appropriate if you've changed the
+source code or applied a patch to do so.
+
+However, if you're certain that the problem is limited
+entirely to incorrect date-time-modified information,
+that there are no discrepancies between the contents of
+source files and files derived from them in the source
+directory, you can often update the date-time-modified
+information for the derived files to work around the
+problem of not having the appropriate tools installed.
+
+On UNIX systems, the simplest way to update the date-time-modified
+information of a file is to use the use the @samp{touch}
+command.
+
+How to use @samp{touch} to update the derived files
+updated by each of the tools is described below.
+@emph{Note:} New versions of @code{g77} might change the set of
+files it generates by invoking each of these tools.
+If you cannot figure
+out for yourself how to handle such a situation, try an
+older version of @code{g77} until you find someone who can
+(or until you obtain and install the relevant tools).
+
+@menu
+* autoconf: Missing autoconf?.
+* bison: Missing bison?.
+* gperf: Missing gperf?.
+* makeinfo: Missing makeinfo?.
+@end menu
+
+@node Missing autoconf?
+@subsubsection Missing @code{autoconf}?
+@cindex @code{autoconf}
+@cindex missing @code{autoconf}
+
+If you cannot install @code{autoconf}, make sure you have started
+with a @emph{fresh} distribution of @code{gcc} and @code{g77},
+do @emph{not} do @samp{make maintainer-clean}, and, to ensure that
+@code{autoconf} is not invoked by @code{make} during the build,
+type these commands:
+
+@example
+sh# @kbd{cd gcc/f/runtime}
+sh# @kbd{touch configure libU77/configure}
+sh# @kbd{cd ../../..}
+sh#
+@end example
+
+@node Missing bison?
+@subsubsection Missing @code{bison}?
+@cindex @code{bison}
+@cindex missing @code{bison}
+
+If you cannot install @code{bison}, make sure you have started
+with a @emph{fresh} distribution of @code{gcc}, do @emph{not}
+do @samp{make maintainer-clean}, and, to ensure that
+@code{bison} is not invoked by @code{make} during the build,
+type these commands:
+
+@example
+sh# @kbd{cd gcc}
+sh# @kbd{touch bi-parser.c bi-parser.h c-parse.c c-parse.h cexp.c}
+sh# @kbd{touch cp/parse.c cp/parse.h objc-parse.c}
+sh# @kbd{cd ..}
+sh#
+@end example
+
+@node Missing gperf?
+@subsubsection Missing @code{gperf}?
+@cindex @code{gperf}
+@cindex missing @code{gperf}
+
+If you cannot install @code{gperf}, make sure you have started
+with a @emph{fresh} distribution of @code{gcc}, do @emph{not}
+do @samp{make maintainer-clean}, and, to ensure that
+@code{gperf} is not invoked by @code{make} during the build,
+type these commands:
+
+@example
+sh# @kbd{cd gcc}
+sh# @kbd{touch c-gperf.h}
+sh# @kbd{cd ..}
+sh#
+@end example
+
+@node Missing makeinfo?
+@subsubsection Missing @code{makeinfo}?
+@cindex @code{makeinfo}
+@cindex missing @code{makeinfo}
+@cindex @code{libg2c.a} not found
+@cindex missing @code{libg2c.a}
+
+If @code{makeinfo} is needed but unavailable
+when installing (via @code{make install}),
+some files, like @file{libg2c.a},
+might not be installed,
+because once @code{make} determines that it cannot
+invoke @code{makeinfo}, it cancels any further processing.
+
+If you cannot install @code{makeinfo}, an easy work-around is to
+specify @samp{MAKEINFO=true} on the @code{make} command line,
+or to specify the @samp{-k} option (@kbd{make -k install}).
+
+Another approach is to force the relevant files to be up-to-date
+by typing these commands and then re-trying the installation step:
+
+@example
+sh# @kbd{cd gcc}
+sh# @kbd{touch f/g77.info f/BUGS f/INSTALL f/NEWS}
+sh# @kbd{cd ..}
+sh#
+@end example
+
+@node Distributing Binaries
+@section Distributing Binaries
+@cindex binaries, distributing
+@cindex code, distributing
+
+If you are building @code{g77} for distribution to others in binary form,
+first make sure you are aware of your legal responsibilities (read
+the file @file{gcc/COPYING} thoroughly).
+
+Then, consider your target audience and decide where @code{g77} should
+be installed.
+
+For systems like GNU/Linux that have no native Fortran compiler (or
+where @code{g77} could be considered the native compiler for Fortran and
+@code{gcc} for C, etc.), you should definitely configure
+@code{g77} for installation
+in @file{/usr/bin} instead of @file{/usr/local/bin}.
+Specify the
+@samp{--prefix=/usr} option when running @file{./configure}.
+
+You might also want to set up the distribution
+so the @file{f77} command is a link to @file{g77},
+although a script that accepts ``classic'' UNIX @code{f77}
+options and translates the command-line to the
+appropriate @code{g77} command line would be more appropriate.
+If you do this, @emph{please} also provide a ``man page'' in
+@file{man/man1/f77.1} describing the command.
+(A link to @file{man/man1/g77.1} is appropriate
+if @file{bin/f77} is a link to @file{bin/g77}.)
+
+For a system that might already have @code{f2c} installed,
+consider whether inter-operation with @code{g77} will be
+important to users of @code{f2c} on that system.
+If you want to improve the likelihood
+that users will be able to use both @code{f2c} and @code{g77}
+to compile code for a single program
+without encountering link-time or run-time incompatibilities,
+make sure that,
+whenever they intend to combine @code{f2c}-produced code
+with @code{g77}-produced code in an executable, they:
+
+@itemize @bullet
+@item
+Use the @file{lib/gcc-lib/@dots{}/include/g2c.h} file
+generated by the @code{g77} build
+in place of the @file{f2c.h} file
+that normally comes with @code{f2c}
+(or versions of @code{g77} prior to 0.5.23)
+when compiling @emph{all} of the @code{f2c}-produced C code
+
+@item
+Link to the @code{lib/gcc-lib/@dots{}/libg2c.a} library
+built by the @code{g77} build
+instead of the @file{libf2c.a} library
+that normally comes with @code{f2c}
+(or versions of @code{g77} prior to 0.5.23)
+@end itemize
+
+How you choose to effect the above depends on whether
+the existing installation of @code{f2c} must be
+maintained.
+
+In any case, it is important to try and ensure that
+the installation keeps working properly even after
+subsequent re-installation of @code{f2c},
+which probably involves overwriting
+@file{/usr/local/lib/libf2c.a} and
+@file{/usr/local/include/f2c.h},
+or similar.
+
+At least, copying @file{libg2c.a} and @file{g2c.h} into
+the appropriate ``public'' directories
+allows users to more easily select the version of
+@code{libf2c} they wish to use for a particular
+build.
+The names are changed by @code{g77} to make this
+coexistence easier to maintain;
+even if @code{f2c} is installed later,
+the @code{g77} files normally installed
+by its installation process aren't disturbed.
+Use of symbolic links from one set of files to
+another might result in problems after a subsequent
+reinstallation of either @code{f2c} or @code{g77},
+so be sure to alert users of your distribution
+accordingly.
+
+(Make sure you clearly document, in the description of
+your distribution, how installation of your distribution will
+affect existing installations of @code{gcc}, @code{f2c},
+@code{f77}, @file{libf2c.a}, and so on.
+Similarly, you should clearly document any requirements
+you assume will be met by users of your distribution.)
+
+For other systems with native @code{f77} (and @code{cc}) compilers,
+configure @code{g77} as you (or most of your audience) would
+configure @code{gcc} for their installations.
+Typically this is for installation in @file{/usr/local},
+and would not include a new version of @file{/usr/bin/f77}
+or @file{/usr/local/bin/f77},
+so users could still use the native @code{f77}.
+
+In any case, for @code{g77} to work properly, you @strong{must} ensure
+that the binaries you distribute include:
+
+@table @file
+@item bin/g77
+This is the command most users use to compile Fortran.
+
+@item bin/gcc
+This is the command some users use to compile Fortran,
+typically when compiling programs written in other languages
+at the same time.
+The @file{bin/gcc} executable file must have been built
+from a @code{gcc} source tree into which a @code{g77} source
+tree was merged and configured, or it will not know how
+to compile Fortran programs.
+
+@item info/g77.info*
+This is the documentation for @code{g77}.
+If it is not included, users will have trouble understanding
+diagnostics messages and other such things, and will send
+you a lot of email asking questions.
+
+Please edit this documentation (by editing @file{gcc/f/*.texi}
+and doing @samp{make doc} from the @file{/usr/src/gcc} directory)
+to reflect any changes you've made to @code{g77}, or at
+least to encourage users of your binary distribution to
+report bugs to you first.
+
+Also, whether you distribute binaries or install @code{g77}
+on your own system, it might be helpful for everyone to
+add a line listing this manual by name and topic to the
+top-level @code{info} node in @file{/usr/info/dir}.
+That way, users can find @code{g77} documentation more
+easily.
+@xref{Updating Documentation,,Updating Your Info Directory}.
+
+@item man/man1/g77.1
+This is the short man page for @code{g77}.
+It is not always kept up-to-date,
+but you might as well include it
+for people who really like ``man'' pages.
+
+@cindex gcc-lib directory
+@cindex directories, gcc-lib
+@item lib/gcc-lib
+This is the directory containing the ``private'' files
+installed by and for @code{gcc}, @code{g77}, @code{g++},
+and other GNU compilers.
+
+@item lib/gcc-lib/@dots{}/f771
+This is the actual Fortran compiler.
+
+@item lib/gcc-lib/@dots{}/libg2c.a
+This is the run-time library for @code{g77}-compiled programs.
+@end table
+
+Whether you want to include the slightly updated (and possibly
+improved) versions of @file{cc1}, @file{cc1plus}, and whatever other
+binaries get rebuilt with the changes the GNU Fortran distribution
+makes to the GNU back end, is up to you.
+These changes are highly unlikely to break any compilers,
+because they involve doing things like adding to the
+list of acceptable compiler options
+(so, for example, @file{cc1plus} accepts, and ignores,
+options that only @file{f771} actually processes).
+
+Please assure users that unless
+they have a specific need for their existing,
+older versions of @file{gcc} command,
+they are unlikely to experience any problems by overwriting
+it with your version---though they could certainly protect
+themselves by making backup copies first!
+
+Otherwise, users might try and install your binaries
+in a ``safe'' place, find they cannot compile Fortran
+programs with your distribution (because, perhaps, they're
+invoking their old version of the @file{gcc} command,
+which does not recognize Fortran programs), and assume
+that your binaries (or, more generally, GNU Fortran
+distributions in general) are broken, at least for their
+system.
+
+Finally, @strong{please} ask for bug reports to go to you first, at least
+until you're sure your distribution is widely used and has been
+well tested.
+This especially goes for those of you making any
+changes to the @code{g77} sources to port @code{g77}, e.g. to OS/2.
+@email{fortran@@gnu.org} has received a fair number of bug
+reports that turned out to be problems with other peoples' ports
+and distributions, about which nothing could be done for the
+user.
+Once you are quite certain a bug report does not involve
+your efforts, you can forward it to us.