Import of unmodified (but trimmed) gcc-2.7.2. The bigger parts of the

non-i386, non-unix, and generatable files have been trimmed, but can easily
be added in later if needed.

gcc-2.7.2.1 will follow shortly, it's a very small delta to this and it's
handy to have both available for reference for such little cost.

The freebsd-specific changes will then be committed, and once the dust has
settled, the bmakefiles will be committed to use this code.

1 files changed, 1981 insertions, 0 deletions

diff --git a/contrib/gcc/recog.c b/contrib/gcc/recog.c
new file mode 100644
index 0000000..745d628
--- /dev/null
+++ b/contrib/gcc/recog.c
@@ -0,0 +1,1981 @@
+/* Subroutines used by or related to instruction recognition.
+   Copyright (C) 1987, 88, 91, 92, 93, 1994 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU CC; see the file COPYING.  If not, write to
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
+
+
+#include "config.h"
+#include "rtl.h"
+#include <stdio.h>
+#include "insn-config.h"
+#include "insn-attr.h"
+#include "insn-flags.h"
+#include "insn-codes.h"
+#include "recog.h"
+#include "regs.h"
+#include "hard-reg-set.h"
+#include "flags.h"
+#include "real.h"
+
+#ifndef STACK_PUSH_CODE
+#ifdef STACK_GROWS_DOWNWARD
+#define STACK_PUSH_CODE PRE_DEC
+#else
+#define STACK_PUSH_CODE PRE_INC
+#endif
+#endif
+
+/* Import from final.c: */
+extern rtx alter_subreg ();
+
+int strict_memory_address_p ();
+int memory_address_p ();
+
+/* Nonzero means allow operands to be volatile.
+   This should be 0 if you are generating rtl, such as if you are calling
+   the functions in optabs.c and expmed.c (most of the time).
+   This should be 1 if all valid insns need to be recognized,
+   such as in regclass.c and final.c and reload.c.
+
+   init_recog and init_recog_no_volatile are responsible for setting this.  */
+
+int volatile_ok;
+
+/* On return from `constrain_operands', indicate which alternative
+   was satisfied.  */
+
+int which_alternative;
+
+/* Nonzero after end of reload pass.
+   Set to 1 or 0 by toplev.c.
+   Controls the significance of (SUBREG (MEM)).  */
+
+int reload_completed;
+
+/* Initialize data used by the function `recog'.
+   This must be called once in the compilation of a function
+   before any insn recognition may be done in the function.  */
+
+void
+init_recog_no_volatile ()
+{
+  volatile_ok = 0;
+}
+
+void
+init_recog ()
+{
+  volatile_ok = 1;
+}
+
+/* Try recognizing the instruction INSN,
+   and return the code number that results.
+   Remember the code so that repeated calls do not
+   need to spend the time for actual rerecognition.
+
+   This function is the normal interface to instruction recognition.
+   The automatically-generated function `recog' is normally called
+   through this one.  (The only exception is in combine.c.)  */
+
+int
+recog_memoized (insn)
+     rtx insn;
+{
+  if (INSN_CODE (insn) < 0)
+    INSN_CODE (insn) = recog (PATTERN (insn), insn, NULL_PTR);
+  return INSN_CODE (insn);
+}
+
+/* Check that X is an insn-body for an `asm' with operands
+   and that the operands mentioned in it are legitimate.  */
+
+int
+check_asm_operands (x)
+     rtx x;
+{
+  int noperands = asm_noperands (x);
+  rtx *operands;
+  int i;
+
+  if (noperands < 0)
+    return 0;
+  if (noperands == 0)
+    return 1;
+
+  operands = (rtx *) alloca (noperands * sizeof (rtx));
+  decode_asm_operands (x, operands, NULL_PTR, NULL_PTR, NULL_PTR);
+
+  for (i = 0; i < noperands; i++)
+    if (!general_operand (operands[i], VOIDmode))
+      return 0;
+
+  return 1;
+}
+
+/* Static data for the next two routines.
+
+   The maximum number of changes supported is defined as the maximum
+   number of operands times 5.  This allows for repeated substitutions
+   inside complex indexed address, or, alternatively, changes in up
+   to 5 insns.  */
+
+#define MAX_CHANGE_LOCS	(MAX_RECOG_OPERANDS * 5)
+
+static rtx change_objects[MAX_CHANGE_LOCS];
+static int change_old_codes[MAX_CHANGE_LOCS];
+static rtx *change_locs[MAX_CHANGE_LOCS];
+static rtx change_olds[MAX_CHANGE_LOCS];
+
+static int num_changes = 0;
+
+/* Validate a proposed change to OBJECT.  LOC is the location in the rtl for
+   at which NEW will be placed.  If OBJECT is zero, no validation is done,
+   the change is simply made.
+
+   Two types of objects are supported:  If OBJECT is a MEM, memory_address_p
+   will be called with the address and mode as parameters.  If OBJECT is
+   an INSN, CALL_INSN, or JUMP_INSN, the insn will be re-recognized with
+   the change in place.
+
+   IN_GROUP is non-zero if this is part of a group of changes that must be
+   performed as a group.  In that case, the changes will be stored.  The
+   function `apply_change_group' will validate and apply the changes.
+
+   If IN_GROUP is zero, this is a single change.  Try to recognize the insn
+   or validate the memory reference with the change applied.  If the result
+   is not valid for the machine, suppress the change and return zero.
+   Otherwise, perform the change and return 1.  */
+
+int
+validate_change (object, loc, new, in_group)
+    rtx object;
+    rtx *loc;
+    rtx new;
+    int in_group;
+{
+  rtx old = *loc;
+
+  if (old == new || rtx_equal_p (old, new))
+    return 1;
+
+  if (num_changes >= MAX_CHANGE_LOCS
+      || (in_group == 0 && num_changes != 0))
+    abort ();
+
+  *loc = new;
+
+  /* Save the information describing this change.  */
+  change_objects[num_changes] = object;
+  change_locs[num_changes] = loc;
+  change_olds[num_changes] = old;
+
+  if (object && GET_CODE (object) != MEM)
+    {
+      /* Set INSN_CODE to force rerecognition of insn.  Save old code in
+	 case invalid.  */
+      change_old_codes[num_changes] = INSN_CODE (object);
+      INSN_CODE (object) = -1;
+    }
+
+  num_changes++;
+
+  /* If we are making a group of changes, return 1.  Otherwise, validate the
+     change group we made.  */
+
+  if (in_group)
+    return 1;
+  else
+    return apply_change_group ();
+}
+
+/* Apply a group of changes previously issued with `validate_change'.
+   Return 1 if all changes are valid, zero otherwise.  */
+
+int
+apply_change_group ()
+{
+  int i;
+
+  /* The changes have been applied and all INSN_CODEs have been reset to force
+     rerecognition.
+
+     The changes are valid if we aren't given an object, or if we are
+     given a MEM and it still is a valid address, or if this is in insn
+     and it is recognized.  In the latter case, if reload has completed,
+     we also require that the operands meet the constraints for
+     the insn.  We do not allow modifying an ASM_OPERANDS after reload
+     has completed because verifying the constraints is too difficult.  */
+
+  for (i = 0; i < num_changes; i++)
+    {
+      rtx object = change_objects[i];
+
+      if (object == 0)
+	continue;
+
+      if (GET_CODE (object) == MEM)
+	{
+	  if (! memory_address_p (GET_MODE (object), XEXP (object, 0)))
+	    break;
+	}
+      else if ((recog_memoized (object) < 0
+		&& (asm_noperands (PATTERN (object)) < 0
+		    || ! check_asm_operands (PATTERN (object))
+		    || reload_completed))
+	       || (reload_completed
+		   && (insn_extract (object),
+		       ! constrain_operands (INSN_CODE (object), 1))))
+	{
+	  rtx pat = PATTERN (object);
+
+	  /* Perhaps we couldn't recognize the insn because there were
+	     extra CLOBBERs at the end.  If so, try to re-recognize
+	     without the last CLOBBER (later iterations will cause each of
+	     them to be eliminated, in turn).  But don't do this if we
+	     have an ASM_OPERAND.  */
+	  if (GET_CODE (pat) == PARALLEL
+	      && GET_CODE (XVECEXP (pat, 0, XVECLEN (pat, 0) - 1)) == CLOBBER
+	      && asm_noperands (PATTERN (object)) < 0)
+	    {
+	       rtx newpat;
+
+	       if (XVECLEN (pat, 0) == 2)
+		 newpat = XVECEXP (pat, 0, 0);
+	       else
+		 {
+		   int j;
+
+		   newpat = gen_rtx (PARALLEL, VOIDmode, 
+				     gen_rtvec (XVECLEN (pat, 0) - 1));
+		   for (j = 0; j < XVECLEN (newpat, 0); j++)
+		     XVECEXP (newpat, 0, j) = XVECEXP (pat, 0, j);
+		 }
+
+	       /* Add a new change to this group to replace the pattern
+		  with this new pattern.  Then consider this change
+		  as having succeeded.  The change we added will
+		  cause the entire call to fail if things remain invalid.
+
+		  Note that this can lose if a later change than the one
+		  we are processing specified &XVECEXP (PATTERN (object), 0, X)
+		  but this shouldn't occur.  */
+
+	       validate_change (object, &PATTERN (object), newpat, 1);
+	     }
+	  else if (GET_CODE (pat) == USE || GET_CODE (pat) == CLOBBER)
+	    /* If this insn is a CLOBBER or USE, it is always valid, but is
+	       never recognized.  */
+	    continue;
+	  else
+	    break;
+	}
+    }
+
+  if (i == num_changes)
+    {
+      num_changes = 0;
+      return 1;
+    }
+  else
+    {
+      cancel_changes (0);
+      return 0;
+    }
+}
+
+/* Return the number of changes so far in the current group.   */
+
+int
+num_validated_changes ()
+{
+  return num_changes;
+}
+
+/* Retract the changes numbered NUM and up.  */
+
+void
+cancel_changes (num)
+     int num;
+{
+  int i;
+
+  /* Back out all the changes.  Do this in the opposite order in which
+     they were made.  */
+  for (i = num_changes - 1; i >= num; i--)
+    {
+      *change_locs[i] = change_olds[i];
+      if (change_objects[i] && GET_CODE (change_objects[i]) != MEM)
+	INSN_CODE (change_objects[i]) = change_old_codes[i];
+    }
+  num_changes = num;
+}
+
+/* Replace every occurrence of FROM in X with TO.  Mark each change with
+   validate_change passing OBJECT.  */
+
+static void
+validate_replace_rtx_1 (loc, from, to, object)
+     rtx *loc;
+     rtx from, to, object;
+{
+  register int i, j;
+  register char *fmt;
+  register rtx x = *loc;
+  enum rtx_code code = GET_CODE (x);
+
+  /* X matches FROM if it is the same rtx or they are both referring to the
+     same register in the same mode.  Avoid calling rtx_equal_p unless the
+     operands look similar.  */
+
+  if (x == from
+      || (GET_CODE (x) == REG && GET_CODE (from) == REG
+	  && GET_MODE (x) == GET_MODE (from)
+	  && REGNO (x) == REGNO (from))
+      || (GET_CODE (x) == GET_CODE (from) && GET_MODE (x) == GET_MODE (from)
+	  && rtx_equal_p (x, from)))
+    {
+      validate_change (object, loc, to, 1);
+      return;
+    }
+
+  /* For commutative or comparison operations, try replacing each argument
+     separately and seeing if we made any changes.  If so, put a constant
+     argument last.*/
+  if (GET_RTX_CLASS (code) == '<' || GET_RTX_CLASS (code) == 'c')
+    {
+      int prev_changes = num_changes;
+
+      validate_replace_rtx_1 (&XEXP (x, 0), from, to, object);
+      validate_replace_rtx_1 (&XEXP (x, 1), from, to, object);
+      if (prev_changes != num_changes && CONSTANT_P (XEXP (x, 0)))
+	{
+	  validate_change (object, loc,
+			   gen_rtx (GET_RTX_CLASS (code) == 'c' ? code
+				    : swap_condition (code),
+				    GET_MODE (x), XEXP (x, 1), XEXP (x, 0)),
+			   1);
+	  x = *loc;
+	  code = GET_CODE (x);
+	}
+    }
+
+  switch (code)
+    {
+    case PLUS:
+      /* If we have have a PLUS whose second operand is now a CONST_INT, use
+	 plus_constant to try to simplify it.  */
+      if (GET_CODE (XEXP (x, 1)) == CONST_INT && XEXP (x, 1) == to)
+	validate_change (object, loc, 
+			 plus_constant (XEXP (x, 0), INTVAL (XEXP (x, 1))), 1);
+      return;
+      
+    case ZERO_EXTEND:
+    case SIGN_EXTEND:
+      /* In these cases, the operation to be performed depends on the mode
+	 of the operand.  If we are replacing the operand with a VOIDmode
+	 constant, we lose the information.  So try to simplify the operation
+	 in that case.  If it fails, substitute in something that we know
+	 won't be recognized.  */
+      if (GET_MODE (to) == VOIDmode
+	  && (XEXP (x, 0) == from
+	      || (GET_CODE (XEXP (x, 0)) == REG && GET_CODE (from) == REG
+		  && GET_MODE (XEXP (x, 0)) == GET_MODE (from)
+		  && REGNO (XEXP (x, 0)) == REGNO (from))))
+	{
+	  rtx new = simplify_unary_operation (code, GET_MODE (x), to,
+					      GET_MODE (from));
+	  if (new == 0)
+	    new = gen_rtx (CLOBBER, GET_MODE (x), const0_rtx);
+
+	  validate_change (object, loc, new, 1);
+	  return;
+	}
+      break;
+	
+    case SUBREG:
+      /* If we have a SUBREG of a register that we are replacing and we are
+	 replacing it with a MEM, make a new MEM and try replacing the
+	 SUBREG with it.  Don't do this if the MEM has a mode-dependent address
+	 or if we would be widening it.  */
+
+      if (SUBREG_REG (x) == from
+	  && GET_CODE (from) == REG
+	  && GET_CODE (to) == MEM
+	  && ! mode_dependent_address_p (XEXP (to, 0))
+	  && ! MEM_VOLATILE_P (to)
+	  && GET_MODE_SIZE (GET_MODE (x)) <= GET_MODE_SIZE (GET_MODE (to)))
+	{
+	  int offset = SUBREG_WORD (x) * UNITS_PER_WORD;
+	  enum machine_mode mode = GET_MODE (x);
+	  rtx new;
+
+	  if (BYTES_BIG_ENDIAN)
+	    offset += (MIN (UNITS_PER_WORD,
+			    GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))))
+		       - MIN (UNITS_PER_WORD, GET_MODE_SIZE (mode)));
+
+	  new = gen_rtx (MEM, mode, plus_constant (XEXP (to, 0), offset));
+	  MEM_VOLATILE_P (new) = MEM_VOLATILE_P (to);
+	  RTX_UNCHANGING_P (new) = RTX_UNCHANGING_P (to);
+	  MEM_IN_STRUCT_P (new) = MEM_IN_STRUCT_P (to);
+	  validate_change (object, loc, new, 1);
+	  return;
+	}
+      break;
+
+    case ZERO_EXTRACT:
+    case SIGN_EXTRACT:
+      /* If we are replacing a register with memory, try to change the memory
+	 to be the mode required for memory in extract operations (this isn't
+	 likely to be an insertion operation; if it was, nothing bad will
+	 happen, we might just fail in some cases).  */
+
+      if (XEXP (x, 0) == from && GET_CODE (from) == REG && GET_CODE (to) == MEM
+	  && GET_CODE (XEXP (x, 1)) == CONST_INT
+	  && GET_CODE (XEXP (x, 2)) == CONST_INT
+	  && ! mode_dependent_address_p (XEXP (to, 0))
+	  && ! MEM_VOLATILE_P (to))
+	{
+	  enum machine_mode wanted_mode = VOIDmode;
+	  enum machine_mode is_mode = GET_MODE (to);
+	  int width = INTVAL (XEXP (x, 1));
+	  int pos = INTVAL (XEXP (x, 2));
+
+#ifdef HAVE_extzv
+	  if (code == ZERO_EXTRACT)
+	    wanted_mode = insn_operand_mode[(int) CODE_FOR_extzv][1];
+#endif
+#ifdef HAVE_extv
+	  if (code == SIGN_EXTRACT)
+	    wanted_mode = insn_operand_mode[(int) CODE_FOR_extv][1];
+#endif
+
+	  /* If we have a narrower mode, we can do something.  */
+	  if (wanted_mode != VOIDmode
+	      && GET_MODE_SIZE (wanted_mode) < GET_MODE_SIZE (is_mode))
+	    {
+	      int offset = pos / BITS_PER_UNIT;
+	      rtx newmem;
+
+		  /* If the bytes and bits are counted differently, we
+		     must adjust the offset.  */
+	      if (BYTES_BIG_ENDIAN != BITS_BIG_ENDIAN)
+		offset = (GET_MODE_SIZE (is_mode) - GET_MODE_SIZE (wanted_mode)
+			  - offset);
+
+	      pos %= GET_MODE_BITSIZE (wanted_mode);
+
+	      newmem = gen_rtx (MEM, wanted_mode,
+				plus_constant (XEXP (to, 0), offset));
+	      RTX_UNCHANGING_P (newmem) = RTX_UNCHANGING_P (to);
+	      MEM_VOLATILE_P (newmem) = MEM_VOLATILE_P (to);
+	      MEM_IN_STRUCT_P (newmem) = MEM_IN_STRUCT_P (to);
+
+	      validate_change (object, &XEXP (x, 2), GEN_INT (pos), 1);
+	      validate_change (object, &XEXP (x, 0), newmem, 1);
+	    }
+	}
+
+      break;
+    }
+      
+  fmt = GET_RTX_FORMAT (code);
+  for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
+    {
+      if (fmt[i] == 'e')
+	validate_replace_rtx_1 (&XEXP (x, i), from, to, object);
+      else if (fmt[i] == 'E')
+	for (j = XVECLEN (x, i) - 1; j >= 0; j--)
+	  validate_replace_rtx_1 (&XVECEXP (x, i, j), from, to, object);
+    }
+}
+
+/* Try replacing every occurrence of FROM in INSN with TO.  After all
+   changes have been made, validate by seeing if INSN is still valid.  */
+
+int
+validate_replace_rtx (from, to, insn)
+     rtx from, to, insn;
+{
+  validate_replace_rtx_1 (&PATTERN (insn), from, to, insn);
+  return apply_change_group ();
+}
+
+#ifdef HAVE_cc0
+/* Return 1 if the insn using CC0 set by INSN does not contain
+   any ordered tests applied to the condition codes.
+   EQ and NE tests do not count.  */
+
+int
+next_insn_tests_no_inequality (insn)
+     rtx insn;
+{
+  register rtx next = next_cc0_user (insn);
+
+  /* If there is no next insn, we have to take the conservative choice.  */
+  if (next == 0)
+    return 0;
+
+  return ((GET_CODE (next) == JUMP_INSN
+	   || GET_CODE (next) == INSN
+	   || GET_CODE (next) == CALL_INSN)
+	  && ! inequality_comparisons_p (PATTERN (next)));
+}
+
+#if 0  /* This is useless since the insn that sets the cc's
+	  must be followed immediately by the use of them.  */
+/* Return 1 if the CC value set up by INSN is not used.  */
+
+int
+next_insns_test_no_inequality (insn)
+     rtx insn;
+{
+  register rtx next = NEXT_INSN (insn);
+
+  for (; next != 0; next = NEXT_INSN (next))
+    {
+      if (GET_CODE (next) == CODE_LABEL
+	  || GET_CODE (next) == BARRIER)
+	return 1;
+      if (GET_CODE (next) == NOTE)
+	continue;
+      if (inequality_comparisons_p (PATTERN (next)))
+	return 0;
+      if (sets_cc0_p (PATTERN (next)) == 1)
+	return 1;
+      if (! reg_mentioned_p (cc0_rtx, PATTERN (next)))
+	return 1;
+    }
+  return 1;
+}
+#endif
+#endif
+
+/* This is used by find_single_use to locate an rtx that contains exactly one
+   use of DEST, which is typically either a REG or CC0.  It returns a
+   pointer to the innermost rtx expression containing DEST.  Appearances of
+   DEST that are being used to totally replace it are not counted.  */
+
+static rtx *
+find_single_use_1 (dest, loc)
+     rtx dest;
+     rtx *loc;
+{
+  rtx x = *loc;
+  enum rtx_code code = GET_CODE (x);
+  rtx *result = 0;
+  rtx *this_result;
+  int i;
+  char *fmt;
+
+  switch (code)
+    {
+    case CONST_INT:
+    case CONST:
+    case LABEL_REF:
+    case SYMBOL_REF:
+    case CONST_DOUBLE:
+    case CLOBBER:
+      return 0;
+
+    case SET:
+      /* If the destination is anything other than CC0, PC, a REG or a SUBREG
+	 of a REG that occupies all of the REG, the insn uses DEST if
+	 it is mentioned in the destination or the source.  Otherwise, we
+	 need just check the source.  */
+      if (GET_CODE (SET_DEST (x)) != CC0
+	  && GET_CODE (SET_DEST (x)) != PC
+	  && GET_CODE (SET_DEST (x)) != REG
+	  && ! (GET_CODE (SET_DEST (x)) == SUBREG
+		&& GET_CODE (SUBREG_REG (SET_DEST (x))) == REG
+		&& (((GET_MODE_SIZE (GET_MODE (SUBREG_REG (SET_DEST (x))))
+		      + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD)
+		    == ((GET_MODE_SIZE (GET_MODE (SET_DEST (x)))
+			 + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD))))
+	break;
+
+      return find_single_use_1 (dest, &SET_SRC (x));
+
+    case MEM:
+    case SUBREG:
+      return find_single_use_1 (dest, &XEXP (x, 0));
+    }
+
+  /* If it wasn't one of the common cases above, check each expression and
+     vector of this code.  Look for a unique usage of DEST.  */
+
+  fmt = GET_RTX_FORMAT (code);
+  for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
+    {
+      if (fmt[i] == 'e')
+	{
+	  if (dest == XEXP (x, i)
+	      || (GET_CODE (dest) == REG && GET_CODE (XEXP (x, i)) == REG
+		  && REGNO (dest) == REGNO (XEXP (x, i))))
+	    this_result = loc;
+	  else
+	    this_result = find_single_use_1 (dest, &XEXP (x, i));
+
+	  if (result == 0)
+	    result = this_result;
+	  else if (this_result)
+	    /* Duplicate usage.  */
+	    return 0;
+	}
+      else if (fmt[i] == 'E')
+	{
+	  int j;
+
+	  for (j = XVECLEN (x, i) - 1; j >= 0; j--)
+	    {
+	      if (XVECEXP (x, i, j) == dest
+		  || (GET_CODE (dest) == REG
+		      && GET_CODE (XVECEXP (x, i, j)) == REG
+		      && REGNO (XVECEXP (x, i, j)) == REGNO (dest)))
+		this_result = loc;
+	      else
+		this_result = find_single_use_1 (dest, &XVECEXP (x, i, j));
+
+	      if (result == 0)
+		result = this_result;
+	      else if (this_result)
+		return 0;
+	    }
+	}
+    }
+
+  return result;
+}
+
+/* See if DEST, produced in INSN, is used only a single time in the
+   sequel.  If so, return a pointer to the innermost rtx expression in which
+   it is used.
+
+   If PLOC is non-zero, *PLOC is set to the insn containing the single use.
+
+   This routine will return usually zero either before flow is called (because
+   there will be no LOG_LINKS notes) or after reload (because the REG_DEAD
+   note can't be trusted).
+
+   If DEST is cc0_rtx, we look only at the next insn.  In that case, we don't
+   care about REG_DEAD notes or LOG_LINKS.
+
+   Otherwise, we find the single use by finding an insn that has a
+   LOG_LINKS pointing at INSN and has a REG_DEAD note for DEST.  If DEST is
+   only referenced once in that insn, we know that it must be the first
+   and last insn referencing DEST.  */
+
+rtx *
+find_single_use (dest, insn, ploc)
+     rtx dest;
+     rtx insn;
+     rtx *ploc;
+{
+  rtx next;
+  rtx *result;
+  rtx link;
+
+#ifdef HAVE_cc0
+  if (dest == cc0_rtx)
+    {
+      next = NEXT_INSN (insn);
+      if (next == 0
+	  || (GET_CODE (next) != INSN && GET_CODE (next) != JUMP_INSN))
+	return 0;
+
+      result = find_single_use_1 (dest, &PATTERN (next));
+      if (result && ploc)
+	*ploc = next;
+      return result;
+    }
+#endif
+
+  if (reload_completed || reload_in_progress || GET_CODE (dest) != REG)
+    return 0;
+
+  for (next = next_nonnote_insn (insn);
+       next != 0 && GET_CODE (next) != CODE_LABEL;
+       next = next_nonnote_insn (next))
+    if (GET_RTX_CLASS (GET_CODE (next)) == 'i' && dead_or_set_p (next, dest))
+      {
+	for (link = LOG_LINKS (next); link; link = XEXP (link, 1))
+	  if (XEXP (link, 0) == insn)
+	    break;
+
+	if (link)
+	  {
+	    result = find_single_use_1 (dest, &PATTERN (next));
+	    if (ploc)
+	      *ploc = next;
+	    return result;
+	  }
+      }
+
+  return 0;
+}
+
+/* Return 1 if OP is a valid general operand for machine mode MODE.
+   This is either a register reference, a memory reference,
+   or a constant.  In the case of a memory reference, the address
+   is checked for general validity for the target machine.
+
+   Register and memory references must have mode MODE in order to be valid,
+   but some constants have no machine mode and are valid for any mode.
+
+   If MODE is VOIDmode, OP is checked for validity for whatever mode
+   it has.
+
+   The main use of this function is as a predicate in match_operand
+   expressions in the machine description.
+
+   For an explanation of this function's behavior for registers of
+   class NO_REGS, see the comment for `register_operand'.  */
+
+int
+general_operand (op, mode)
+     register rtx op;
+     enum machine_mode mode;
+{
+  register enum rtx_code code = GET_CODE (op);
+  int mode_altering_drug = 0;
+
+  if (mode == VOIDmode)
+    mode = GET_MODE (op);
+
+  /* Don't accept CONST_INT or anything similar
+     if the caller wants something floating.  */
+  if (GET_MODE (op) == VOIDmode && mode != VOIDmode
+      && GET_MODE_CLASS (mode) != MODE_INT
+      && GET_MODE_CLASS (mode) != MODE_PARTIAL_INT)
+    return 0;
+
+  if (CONSTANT_P (op))
+    return ((GET_MODE (op) == VOIDmode || GET_MODE (op) == mode)
+#ifdef LEGITIMATE_PIC_OPERAND_P
+	    && (! flag_pic || LEGITIMATE_PIC_OPERAND_P (op))
+#endif
+	    && LEGITIMATE_CONSTANT_P (op));
+
+  /* Except for certain constants with VOIDmode, already checked for,
+     OP's mode must match MODE if MODE specifies a mode.  */
+
+  if (GET_MODE (op) != mode)
+    return 0;
+
+  if (code == SUBREG)
+    {
+#ifdef INSN_SCHEDULING
+      /* On machines that have insn scheduling, we want all memory
+	 reference to be explicit, so outlaw paradoxical SUBREGs.  */
+      if (GET_CODE (SUBREG_REG (op)) == MEM
+	  && GET_MODE_SIZE (mode) > GET_MODE_SIZE (GET_MODE (SUBREG_REG (op))))
+	return 0;
+#endif
+
+      op = SUBREG_REG (op);
+      code = GET_CODE (op);
+#if 0
+      /* No longer needed, since (SUBREG (MEM...))
+	 will load the MEM into a reload reg in the MEM's own mode.  */
+      mode_altering_drug = 1;
+#endif
+    }
+
+  if (code == REG)
+    /* A register whose class is NO_REGS is not a general operand.  */
+    return (REGNO (op) >= FIRST_PSEUDO_REGISTER
+	    || REGNO_REG_CLASS (REGNO (op)) != NO_REGS);
+
+  if (code == MEM)
+    {
+      register rtx y = XEXP (op, 0);
+      if (! volatile_ok && MEM_VOLATILE_P (op))
+	return 0;
+      /* Use the mem's mode, since it will be reloaded thus.  */
+      mode = GET_MODE (op);
+      GO_IF_LEGITIMATE_ADDRESS (mode, y, win);
+    }
+  return 0;
+
+ win:
+  if (mode_altering_drug)
+    return ! mode_dependent_address_p (XEXP (op, 0));
+  return 1;
+}
+
+/* Return 1 if OP is a valid memory address for a memory reference
+   of mode MODE.
+
+   The main use of this function is as a predicate in match_operand
+   expressions in the machine description.  */
+
+int
+address_operand (op, mode)
+     register rtx op;
+     enum machine_mode mode;
+{
+  return memory_address_p (mode, op);
+}
+
+/* Return 1 if OP is a register reference of mode MODE.
+   If MODE is VOIDmode, accept a register in any mode.
+
+   The main use of this function is as a predicate in match_operand
+   expressions in the machine description.
+
+   As a special exception, registers whose class is NO_REGS are
+   not accepted by `register_operand'.  The reason for this change
+   is to allow the representation of special architecture artifacts
+   (such as a condition code register) without extending the rtl
+   definitions.  Since registers of class NO_REGS cannot be used
+   as registers in any case where register classes are examined,
+   it is most consistent to keep this function from accepting them.  */
+
+int
+register_operand (op, mode)
+     register rtx op;
+     enum machine_mode mode;
+{
+  if (GET_MODE (op) != mode && mode != VOIDmode)
+    return 0;
+
+  if (GET_CODE (op) == SUBREG)
+    {
+      /* Before reload, we can allow (SUBREG (MEM...)) as a register operand
+	 because it is guaranteed to be reloaded into one.
+	 Just make sure the MEM is valid in itself.
+	 (Ideally, (SUBREG (MEM)...) should not exist after reload,
+	 but currently it does result from (SUBREG (REG)...) where the
+	 reg went on the stack.)  */
+      if (! reload_completed && GET_CODE (SUBREG_REG (op)) == MEM)
+	return general_operand (op, mode);
+
+#ifdef CLASS_CANNOT_CHANGE_SIZE
+      if (GET_CODE (SUBREG_REG (op)) == REG
+	  && REGNO (SUBREG_REG (op)) < FIRST_PSEUDO_REGISTER
+	  && TEST_HARD_REG_BIT (reg_class_contents[(int) CLASS_CANNOT_CHANGE_SIZE],
+				REGNO (SUBREG_REG (op)))
+	  && (GET_MODE_SIZE (mode)
+	      != GET_MODE_SIZE (GET_MODE (SUBREG_REG (op)))))
+	return 0;
+#endif
+
+      op = SUBREG_REG (op);
+    }
+
+  /* We don't consider registers whose class is NO_REGS
+     to be a register operand.  */
+  return (GET_CODE (op) == REG
+	  && (REGNO (op) >= FIRST_PSEUDO_REGISTER
+	      || REGNO_REG_CLASS (REGNO (op)) != NO_REGS));
+}
+
+/* Return 1 if OP should match a MATCH_SCRATCH, i.e., if it is a SCRATCH
+   or a hard register.  */
+
+int
+scratch_operand (op, mode)
+     register rtx op;
+     enum machine_mode mode;
+{
+  return (GET_MODE (op) == mode
+	  && (GET_CODE (op) == SCRATCH
+	      || (GET_CODE (op) == REG
+		  && REGNO (op) < FIRST_PSEUDO_REGISTER)));
+}
+
+/* Return 1 if OP is a valid immediate operand for mode MODE.
+
+   The main use of this function is as a predicate in match_operand
+   expressions in the machine description.  */
+
+int
+immediate_operand (op, mode)
+     register rtx op;
+     enum machine_mode mode;
+{
+  /* Don't accept CONST_INT or anything similar
+     if the caller wants something floating.  */
+  if (GET_MODE (op) == VOIDmode && mode != VOIDmode
+      && GET_MODE_CLASS (mode) != MODE_INT
+      && GET_MODE_CLASS (mode) != MODE_PARTIAL_INT)
+    return 0;
+
+  return (CONSTANT_P (op)
+	  && (GET_MODE (op) == mode || mode == VOIDmode
+	      || GET_MODE (op) == VOIDmode)
+#ifdef LEGITIMATE_PIC_OPERAND_P
+	  && (! flag_pic || LEGITIMATE_PIC_OPERAND_P (op))
+#endif
+	  && LEGITIMATE_CONSTANT_P (op));
+}
+
+/* Returns 1 if OP is an operand that is a CONST_INT.  */
+
+int
+const_int_operand (op, mode)
+     register rtx op;
+     enum machine_mode mode;
+{
+  return GET_CODE (op) == CONST_INT;
+}
+
+/* Returns 1 if OP is an operand that is a constant integer or constant
+   floating-point number.  */
+
+int
+const_double_operand (op, mode)
+     register rtx op;
+     enum machine_mode mode;
+{
+  /* Don't accept CONST_INT or anything similar
+     if the caller wants something floating.  */
+  if (GET_MODE (op) == VOIDmode && mode != VOIDmode
+      && GET_MODE_CLASS (mode) != MODE_INT
+      && GET_MODE_CLASS (mode) != MODE_PARTIAL_INT)
+    return 0;
+
+  return ((GET_CODE (op) == CONST_DOUBLE || GET_CODE (op) == CONST_INT)
+	  && (mode == VOIDmode || GET_MODE (op) == mode
+	      || GET_MODE (op) == VOIDmode));
+}
+
+/* Return 1 if OP is a general operand that is not an immediate operand.  */
+
+int
+nonimmediate_operand (op, mode)
+     register rtx op;
+     enum machine_mode mode;
+{
+  return (general_operand (op, mode) && ! CONSTANT_P (op));
+}
+
+/* Return 1 if OP is a register reference or immediate value of mode MODE.  */
+
+int
+nonmemory_operand (op, mode)
+     register rtx op;
+     enum machine_mode mode;
+{
+  if (CONSTANT_P (op))
+    {
+      /* Don't accept CONST_INT or anything similar
+	 if the caller wants something floating.  */
+      if (GET_MODE (op) == VOIDmode && mode != VOIDmode
+	  && GET_MODE_CLASS (mode) != MODE_INT
+	  && GET_MODE_CLASS (mode) != MODE_PARTIAL_INT)
+	return 0;
+
+      return ((GET_MODE (op) == VOIDmode || GET_MODE (op) == mode)
+#ifdef LEGITIMATE_PIC_OPERAND_P
+	      && (! flag_pic || LEGITIMATE_PIC_OPERAND_P (op))
+#endif
+	      && LEGITIMATE_CONSTANT_P (op));
+    }
+
+  if (GET_MODE (op) != mode && mode != VOIDmode)
+    return 0;
+
+  if (GET_CODE (op) == SUBREG)
+    {
+      /* Before reload, we can allow (SUBREG (MEM...)) as a register operand
+	 because it is guaranteed to be reloaded into one.
+	 Just make sure the MEM is valid in itself.
+	 (Ideally, (SUBREG (MEM)...) should not exist after reload,
+	 but currently it does result from (SUBREG (REG)...) where the
+	 reg went on the stack.)  */
+      if (! reload_completed && GET_CODE (SUBREG_REG (op)) == MEM)
+	return general_operand (op, mode);
+      op = SUBREG_REG (op);
+    }
+
+  /* We don't consider registers whose class is NO_REGS
+     to be a register operand.  */
+  return (GET_CODE (op) == REG
+	  && (REGNO (op) >= FIRST_PSEUDO_REGISTER
+	      || REGNO_REG_CLASS (REGNO (op)) != NO_REGS));
+}
+
+/* Return 1 if OP is a valid operand that stands for pushing a
+   value of mode MODE onto the stack.
+
+   The main use of this function is as a predicate in match_operand
+   expressions in the machine description.  */
+
+int
+push_operand (op, mode)
+     rtx op;
+     enum machine_mode mode;
+{
+  if (GET_CODE (op) != MEM)
+    return 0;
+
+  if (GET_MODE (op) != mode)
+    return 0;
+
+  op = XEXP (op, 0);
+
+  if (GET_CODE (op) != STACK_PUSH_CODE)
+    return 0;
+
+  return XEXP (op, 0) == stack_pointer_rtx;
+}
+
+/* Return 1 if ADDR is a valid memory address for mode MODE.  */
+
+int
+memory_address_p (mode, addr)
+     enum machine_mode mode;
+     register rtx addr;
+{
+  GO_IF_LEGITIMATE_ADDRESS (mode, addr, win);
+  return 0;
+
+ win:
+  return 1;
+}
+
+/* Return 1 if OP is a valid memory reference with mode MODE,
+   including a valid address.
+
+   The main use of this function is as a predicate in match_operand
+   expressions in the machine description.  */
+
+int
+memory_operand (op, mode)
+     register rtx op;
+     enum machine_mode mode;
+{
+  rtx inner;
+
+  if (! reload_completed)
+    /* Note that no SUBREG is a memory operand before end of reload pass,
+       because (SUBREG (MEM...)) forces reloading into a register.  */
+    return GET_CODE (op) == MEM && general_operand (op, mode);
+
+  if (mode != VOIDmode && GET_MODE (op) != mode)
+    return 0;
+
+  inner = op;
+  if (GET_CODE (inner) == SUBREG)
+    inner = SUBREG_REG (inner);
+
+  return (GET_CODE (inner) == MEM && general_operand (op, mode));
+}
+
+/* Return 1 if OP is a valid indirect memory reference with mode MODE;
+   that is, a memory reference whose address is a general_operand.  */
+
+int
+indirect_operand (op, mode)
+     register rtx op;
+     enum machine_mode mode;
+{
+  /* Before reload, a SUBREG isn't in memory (see memory_operand, above).  */
+  if (! reload_completed
+      && GET_CODE (op) == SUBREG && GET_CODE (SUBREG_REG (op)) == MEM)
+    {
+      register int offset = SUBREG_WORD (op) * UNITS_PER_WORD;
+      rtx inner = SUBREG_REG (op);
+
+      if (BYTES_BIG_ENDIAN)
+	offset -= (MIN (UNITS_PER_WORD, GET_MODE_SIZE (GET_MODE (op)))
+		   - MIN (UNITS_PER_WORD, GET_MODE_SIZE (GET_MODE (inner))));
+
+      if (mode != VOIDmode && GET_MODE (op) != mode)
+	return 0;
+
+      /* The only way that we can have a general_operand as the resulting
+	 address is if OFFSET is zero and the address already is an operand
+	 or if the address is (plus Y (const_int -OFFSET)) and Y is an
+	 operand.  */
+
+      return ((offset == 0 && general_operand (XEXP (inner, 0), Pmode))
+	      || (GET_CODE (XEXP (inner, 0)) == PLUS
+		  && GET_CODE (XEXP (XEXP (inner, 0), 1)) == CONST_INT
+		  && INTVAL (XEXP (XEXP (inner, 0), 1)) == -offset
+		  && general_operand (XEXP (XEXP (inner, 0), 0), Pmode)));
+    }
+
+  return (GET_CODE (op) == MEM
+	  && memory_operand (op, mode)
+	  && general_operand (XEXP (op, 0), Pmode));
+}
+
+/* Return 1 if this is a comparison operator.  This allows the use of
+   MATCH_OPERATOR to recognize all the branch insns.  */
+
+int
+comparison_operator (op, mode)
+    register rtx op;
+    enum machine_mode mode;
+{
+  return ((mode == VOIDmode || GET_MODE (op) == mode)
+	  && GET_RTX_CLASS (GET_CODE (op)) == '<');
+}
+
+/* If BODY is an insn body that uses ASM_OPERANDS,
+   return the number of operands (both input and output) in the insn.
+   Otherwise return -1.  */
+
+int
+asm_noperands (body)
+     rtx body;
+{
+  if (GET_CODE (body) == ASM_OPERANDS)
+    /* No output operands: return number of input operands.  */
+    return ASM_OPERANDS_INPUT_LENGTH (body);
+  if (GET_CODE (body) == SET && GET_CODE (SET_SRC (body)) == ASM_OPERANDS)
+    /* Single output operand: BODY is (set OUTPUT (asm_operands ...)).  */
+    return ASM_OPERANDS_INPUT_LENGTH (SET_SRC (body)) + 1;
+  else if (GET_CODE (body) == PARALLEL
+	   && GET_CODE (XVECEXP (body, 0, 0)) == SET
+	   && GET_CODE (SET_SRC (XVECEXP (body, 0, 0))) == ASM_OPERANDS)
+    {
+      /* Multiple output operands, or 1 output plus some clobbers:
+	 body is [(set OUTPUT (asm_operands ...))... (clobber (reg ...))...].  */
+      int i;
+      int n_sets;
+
+      /* Count backwards through CLOBBERs to determine number of SETs.  */
+      for (i = XVECLEN (body, 0); i > 0; i--)
+	{
+	  if (GET_CODE (XVECEXP (body, 0, i - 1)) == SET)
+	    break;
+	  if (GET_CODE (XVECEXP (body, 0, i - 1)) != CLOBBER)
+	    return -1;
+	}
+
+      /* N_SETS is now number of output operands.  */
+      n_sets = i;
+
+      /* Verify that all the SETs we have
+	 came from a single original asm_operands insn
+	 (so that invalid combinations are blocked).  */
+      for (i = 0; i < n_sets; i++)
+	{
+	  rtx elt = XVECEXP (body, 0, i);
+	  if (GET_CODE (elt) != SET)
+	    return -1;
+	  if (GET_CODE (SET_SRC (elt)) != ASM_OPERANDS)
+	    return -1;
+	  /* If these ASM_OPERANDS rtx's came from different original insns
+	     then they aren't allowed together.  */
+	  if (ASM_OPERANDS_INPUT_VEC (SET_SRC (elt))
+	      != ASM_OPERANDS_INPUT_VEC (SET_SRC (XVECEXP (body, 0, 0))))
+	    return -1;
+	}
+      return (ASM_OPERANDS_INPUT_LENGTH (SET_SRC (XVECEXP (body, 0, 0)))
+	      + n_sets);
+    }
+  else if (GET_CODE (body) == PARALLEL
+	   && GET_CODE (XVECEXP (body, 0, 0)) == ASM_OPERANDS)
+    {
+      /* 0 outputs, but some clobbers:
+	 body is [(asm_operands ...) (clobber (reg ...))...].  */
+      int i;
+
+      /* Make sure all the other parallel things really are clobbers.  */
+      for (i = XVECLEN (body, 0) - 1; i > 0; i--)
+	if (GET_CODE (XVECEXP (body, 0, i)) != CLOBBER)
+	  return -1;
+
+      return ASM_OPERANDS_INPUT_LENGTH (XVECEXP (body, 0, 0));
+    }
+  else
+    return -1;
+}
+
+/* Assuming BODY is an insn body that uses ASM_OPERANDS,
+   copy its operands (both input and output) into the vector OPERANDS,
+   the locations of the operands within the insn into the vector OPERAND_LOCS,
+   and the constraints for the operands into CONSTRAINTS.
+   Write the modes of the operands into MODES.
+   Return the assembler-template.
+
+   If MODES, OPERAND_LOCS, CONSTRAINTS or OPERANDS is 0,
+   we don't store that info.  */
+
+char *
+decode_asm_operands (body, operands, operand_locs, constraints, modes)
+     rtx body;
+     rtx *operands;
+     rtx **operand_locs;
+     char **constraints;
+     enum machine_mode *modes;
+{
+  register int i;
+  int noperands;
+  char *template = 0;
+
+  if (GET_CODE (body) == SET && GET_CODE (SET_SRC (body)) == ASM_OPERANDS)
+    {
+      rtx asmop = SET_SRC (body);
+      /* Single output operand: BODY is (set OUTPUT (asm_operands ....)).  */
+
+      noperands = ASM_OPERANDS_INPUT_LENGTH (asmop) + 1;
+
+      for (i = 1; i < noperands; i++)
+	{
+	  if (operand_locs)
+	    operand_locs[i] = &ASM_OPERANDS_INPUT (asmop, i - 1);
+	  if (operands)
+	    operands[i] = ASM_OPERANDS_INPUT (asmop, i - 1);
+	  if (constraints)
+	    constraints[i] = ASM_OPERANDS_INPUT_CONSTRAINT (asmop, i - 1);
+	  if (modes)
+	    modes[i] = ASM_OPERANDS_INPUT_MODE (asmop, i - 1);
+	}
+
+      /* The output is in the SET.
+	 Its constraint is in the ASM_OPERANDS itself.  */
+      if (operands)
+	operands[0] = SET_DEST (body);
+      if (operand_locs)
+	operand_locs[0] = &SET_DEST (body);
+      if (constraints)
+	constraints[0] = ASM_OPERANDS_OUTPUT_CONSTRAINT (asmop);
+      if (modes)
+	modes[0] = GET_MODE (SET_DEST (body));
+      template = ASM_OPERANDS_TEMPLATE (asmop);
+    }
+  else if (GET_CODE (body) == ASM_OPERANDS)
+    {
+      rtx asmop = body;
+      /* No output operands: BODY is (asm_operands ....).  */
+
+      noperands = ASM_OPERANDS_INPUT_LENGTH (asmop);
+
+      /* The input operands are found in the 1st element vector.  */
+      /* Constraints for inputs are in the 2nd element vector.  */
+      for (i = 0; i < noperands; i++)
+	{
+	  if (operand_locs)
+	    operand_locs[i] = &ASM_OPERANDS_INPUT (asmop, i);
+	  if (operands)
+	    operands[i] = ASM_OPERANDS_INPUT (asmop, i);
+	  if (constraints)
+	    constraints[i] = ASM_OPERANDS_INPUT_CONSTRAINT (asmop, i);
+	  if (modes)
+	    modes[i] = ASM_OPERANDS_INPUT_MODE (asmop, i);
+	}
+      template = ASM_OPERANDS_TEMPLATE (asmop);
+    }
+  else if (GET_CODE (body) == PARALLEL
+	   && GET_CODE (XVECEXP (body, 0, 0)) == SET)
+    {
+      rtx asmop = SET_SRC (XVECEXP (body, 0, 0));
+      int nparallel = XVECLEN (body, 0); /* Includes CLOBBERs.  */
+      int nin = ASM_OPERANDS_INPUT_LENGTH (asmop);
+      int nout = 0;		/* Does not include CLOBBERs.  */
+
+      /* At least one output, plus some CLOBBERs.  */
+
+      /* The outputs are in the SETs.
+	 Their constraints are in the ASM_OPERANDS itself.  */
+      for (i = 0; i < nparallel; i++)
+	{
+	  if (GET_CODE (XVECEXP (body, 0, i)) == CLOBBER)
+	    break;		/* Past last SET */
+	  
+	  if (operands)
+	    operands[i] = SET_DEST (XVECEXP (body, 0, i));
+	  if (operand_locs)
+	    operand_locs[i] = &SET_DEST (XVECEXP (body, 0, i));
+	  if (constraints)
+	    constraints[i] = XSTR (SET_SRC (XVECEXP (body, 0, i)), 1);
+	  if (modes)
+	    modes[i] = GET_MODE (SET_DEST (XVECEXP (body, 0, i)));
+	  nout++;
+	}
+
+      for (i = 0; i < nin; i++)
+	{
+	  if (operand_locs)
+	    operand_locs[i + nout] = &ASM_OPERANDS_INPUT (asmop, i);
+	  if (operands)
+	    operands[i + nout] = ASM_OPERANDS_INPUT (asmop, i);
+	  if (constraints)
+	    constraints[i + nout] = ASM_OPERANDS_INPUT_CONSTRAINT (asmop, i);
+	  if (modes)
+	    modes[i + nout] = ASM_OPERANDS_INPUT_MODE (asmop, i);
+	}
+
+      template = ASM_OPERANDS_TEMPLATE (asmop);
+    }
+  else if (GET_CODE (body) == PARALLEL
+	   && GET_CODE (XVECEXP (body, 0, 0)) == ASM_OPERANDS)
+    {
+      /* No outputs, but some CLOBBERs.  */
+
+      rtx asmop = XVECEXP (body, 0, 0);
+      int nin = ASM_OPERANDS_INPUT_LENGTH (asmop);
+
+      for (i = 0; i < nin; i++)
+	{
+	  if (operand_locs)
+	    operand_locs[i] = &ASM_OPERANDS_INPUT (asmop, i);
+	  if (operands)
+	    operands[i] = ASM_OPERANDS_INPUT (asmop, i);
+	  if (constraints)
+	    constraints[i] = ASM_OPERANDS_INPUT_CONSTRAINT (asmop, i);
+	  if (modes)
+	    modes[i] = ASM_OPERANDS_INPUT_MODE (asmop, i);
+	}
+
+      template = ASM_OPERANDS_TEMPLATE (asmop);
+    }
+
+  return template;
+}
+
+/* Given an rtx *P, if it is a sum containing an integer constant term,
+   return the location (type rtx *) of the pointer to that constant term.
+   Otherwise, return a null pointer.  */
+
+static rtx *
+find_constant_term_loc (p)
+     rtx *p;
+{
+  register rtx *tem;
+  register enum rtx_code code = GET_CODE (*p);
+
+  /* If *P IS such a constant term, P is its location.  */
+
+  if (code == CONST_INT || code == SYMBOL_REF || code == LABEL_REF
+      || code == CONST)
+    return p;
+
+  /* Otherwise, if not a sum, it has no constant term.  */
+
+  if (GET_CODE (*p) != PLUS)
+    return 0;
+
+  /* If one of the summands is constant, return its location.  */
+
+  if (XEXP (*p, 0) && CONSTANT_P (XEXP (*p, 0))
+      && XEXP (*p, 1) && CONSTANT_P (XEXP (*p, 1)))
+    return p;
+
+  /* Otherwise, check each summand for containing a constant term.  */
+
+  if (XEXP (*p, 0) != 0)
+    {
+      tem = find_constant_term_loc (&XEXP (*p, 0));
+      if (tem != 0)
+	return tem;
+    }
+
+  if (XEXP (*p, 1) != 0)
+    {
+      tem = find_constant_term_loc (&XEXP (*p, 1));
+      if (tem != 0)
+	return tem;
+    }
+
+  return 0;
+}
+
+/* Return 1 if OP is a memory reference
+   whose address contains no side effects
+   and remains valid after the addition
+   of a positive integer less than the
+   size of the object being referenced.
+
+   We assume that the original address is valid and do not check it.
+
+   This uses strict_memory_address_p as a subroutine, so
+   don't use it before reload.  */
+
+int
+offsettable_memref_p (op)
+     rtx op;
+{
+  return ((GET_CODE (op) == MEM)
+	  && offsettable_address_p (1, GET_MODE (op), XEXP (op, 0)));
+}
+
+/* Similar, but don't require a strictly valid mem ref:
+   consider pseudo-regs valid as index or base regs.  */
+
+int
+offsettable_nonstrict_memref_p (op)
+     rtx op;
+{
+  return ((GET_CODE (op) == MEM)
+	  && offsettable_address_p (0, GET_MODE (op), XEXP (op, 0)));
+}
+
+/* Return 1 if Y is a memory address which contains no side effects
+   and would remain valid after the addition of a positive integer
+   less than the size of that mode.
+
+   We assume that the original address is valid and do not check it.
+   We do check that it is valid for narrower modes.
+
+   If STRICTP is nonzero, we require a strictly valid address,
+   for the sake of use in reload.c.  */
+
+int
+offsettable_address_p (strictp, mode, y)
+     int strictp;
+     enum machine_mode mode;
+     register rtx y;
+{
+  register enum rtx_code ycode = GET_CODE (y);
+  register rtx z;
+  rtx y1 = y;
+  rtx *y2;
+  int (*addressp) () = (strictp ? strict_memory_address_p : memory_address_p);
+
+  if (CONSTANT_ADDRESS_P (y))
+    return 1;
+
+  /* Adjusting an offsettable address involves changing to a narrower mode.
+     Make sure that's OK.  */
+
+  if (mode_dependent_address_p (y))
+    return 0;
+
+  /* If the expression contains a constant term,
+     see if it remains valid when max possible offset is added.  */
+
+  if ((ycode == PLUS) && (y2 = find_constant_term_loc (&y1)))
+    {
+      int good;
+
+      y1 = *y2;
+      *y2 = plus_constant (*y2, GET_MODE_SIZE (mode) - 1);
+      /* Use QImode because an odd displacement may be automatically invalid
+	 for any wider mode.  But it should be valid for a single byte.  */
+      good = (*addressp) (QImode, y);
+
+      /* In any case, restore old contents of memory.  */
+      *y2 = y1;
+      return good;
+    }
+
+  if (ycode == PRE_DEC || ycode == PRE_INC
+      || ycode == POST_DEC || ycode == POST_INC)
+    return 0;
+
+  /* The offset added here is chosen as the maximum offset that
+     any instruction could need to add when operating on something
+     of the specified mode.  We assume that if Y and Y+c are
+     valid addresses then so is Y+d for all 0<d<c.  */
+
+  z = plus_constant_for_output (y, GET_MODE_SIZE (mode) - 1);
+
+  /* Use QImode because an odd displacement may be automatically invalid
+     for any wider mode.  But it should be valid for a single byte.  */
+  return (*addressp) (QImode, z);
+}
+
+/* Return 1 if ADDR is an address-expression whose effect depends
+   on the mode of the memory reference it is used in.
+
+   Autoincrement addressing is a typical example of mode-dependence
+   because the amount of the increment depends on the mode.  */
+
+int
+mode_dependent_address_p (addr)
+     rtx addr;
+{
+  GO_IF_MODE_DEPENDENT_ADDRESS (addr, win);
+  return 0;
+ win:
+  return 1;
+}
+
+/* Return 1 if OP is a general operand
+   other than a memory ref with a mode dependent address.  */
+
+int
+mode_independent_operand (op, mode)
+     enum machine_mode mode;
+     rtx op;
+{
+  rtx addr;
+
+  if (! general_operand (op, mode))
+    return 0;
+
+  if (GET_CODE (op) != MEM)
+    return 1;
+
+  addr = XEXP (op, 0);
+  GO_IF_MODE_DEPENDENT_ADDRESS (addr, lose);
+  return 1;
+ lose:
+  return 0;
+}
+
+/* Given an operand OP that is a valid memory reference
+   which satisfies offsettable_memref_p,
+   return a new memory reference whose address has been adjusted by OFFSET.
+   OFFSET should be positive and less than the size of the object referenced.
+*/
+
+rtx
+adj_offsettable_operand (op, offset)
+     rtx op;
+     int offset;
+{
+  register enum rtx_code code = GET_CODE (op);
+
+  if (code == MEM) 
+    {
+      register rtx y = XEXP (op, 0);
+      register rtx new;
+
+      if (CONSTANT_ADDRESS_P (y))
+	{
+	  new = gen_rtx (MEM, GET_MODE (op), plus_constant_for_output (y, offset));
+	  RTX_UNCHANGING_P (new) = RTX_UNCHANGING_P (op);
+	  return new;
+	}
+
+      if (GET_CODE (y) == PLUS)
+	{
+	  rtx z = y;
+	  register rtx *const_loc;
+
+	  op = copy_rtx (op);
+	  z = XEXP (op, 0);
+	  const_loc = find_constant_term_loc (&z);
+	  if (const_loc)
+	    {
+	      *const_loc = plus_constant_for_output (*const_loc, offset);
+	      return op;
+	    }
+	}
+
+      new = gen_rtx (MEM, GET_MODE (op), plus_constant_for_output (y, offset));
+      RTX_UNCHANGING_P (new) = RTX_UNCHANGING_P (op);
+      return new;
+    }
+  abort ();
+}
+
+#ifdef REGISTER_CONSTRAINTS
+
+/* Check the operands of an insn (found in recog_operands)
+   against the insn's operand constraints (found via INSN_CODE_NUM)
+   and return 1 if they are valid.
+
+   WHICH_ALTERNATIVE is set to a number which indicates which
+   alternative of constraints was matched: 0 for the first alternative,
+   1 for the next, etc.
+
+   In addition, when two operands are match
+   and it happens that the output operand is (reg) while the
+   input operand is --(reg) or ++(reg) (a pre-inc or pre-dec),
+   make the output operand look like the input.
+   This is because the output operand is the one the template will print.
+
+   This is used in final, just before printing the assembler code and by
+   the routines that determine an insn's attribute.
+
+   If STRICT is a positive non-zero value, it means that we have been
+   called after reload has been completed.  In that case, we must
+   do all checks strictly.  If it is zero, it means that we have been called
+   before reload has completed.  In that case, we first try to see if we can
+   find an alternative that matches strictly.  If not, we try again, this
+   time assuming that reload will fix up the insn.  This provides a "best
+   guess" for the alternative and is used to compute attributes of insns prior
+   to reload.  A negative value of STRICT is used for this internal call.  */
+
+struct funny_match
+{
+  int this, other;
+};
+
+int
+constrain_operands (insn_code_num, strict)
+     int insn_code_num;
+     int strict;
+{
+  char *constraints[MAX_RECOG_OPERANDS];
+  int matching_operands[MAX_RECOG_OPERANDS];
+  enum op_type {OP_IN, OP_OUT, OP_INOUT} op_types[MAX_RECOG_OPERANDS];
+  int earlyclobber[MAX_RECOG_OPERANDS];
+  register int c;
+  int noperands = insn_n_operands[insn_code_num];
+
+  struct funny_match funny_match[MAX_RECOG_OPERANDS];
+  int funny_match_index;
+  int nalternatives = insn_n_alternatives[insn_code_num];
+
+  if (noperands == 0 || nalternatives == 0)
+    return 1;
+
+  for (c = 0; c < noperands; c++)
+    {
+      constraints[c] = insn_operand_constraint[insn_code_num][c];
+      matching_operands[c] = -1;
+      op_types[c] = OP_IN;
+    }
+
+  which_alternative = 0;
+
+  while (which_alternative < nalternatives)
+    {
+      register int opno;
+      int lose = 0;
+      funny_match_index = 0;
+
+      for (opno = 0; opno < noperands; opno++)
+	{
+	  register rtx op = recog_operand[opno];
+	  enum machine_mode mode = GET_MODE (op);
+	  register char *p = constraints[opno];
+	  int offset = 0;
+	  int win = 0;
+	  int val;
+
+	  earlyclobber[opno] = 0;
+
+	  if (GET_CODE (op) == SUBREG)
+	    {
+	      if (GET_CODE (SUBREG_REG (op)) == REG
+		  && REGNO (SUBREG_REG (op)) < FIRST_PSEUDO_REGISTER)
+		offset = SUBREG_WORD (op);
+	      op = SUBREG_REG (op);
+	    }
+
+	  /* An empty constraint or empty alternative
+	     allows anything which matched the pattern.  */
+	  if (*p == 0 || *p == ',')
+	    win = 1;
+
+	  while (*p && (c = *p++) != ',')
+	    switch (c)
+	      {
+	      case '?':
+	      case '!':
+	      case '*':
+	      case '%':
+		break;
+
+	      case '#':
+		/* Ignore rest of this alternative as far as
+		   constraint checking is concerned.  */
+		while (*p && *p != ',')
+		  p++;
+		break;
+
+	      case '=':
+		op_types[opno] = OP_OUT;
+		break;
+
+	      case '+':
+		op_types[opno] = OP_INOUT;
+		break;
+
+	      case '&':
+		earlyclobber[opno] = 1;
+		break;
+
+	      case '0':
+	      case '1':
+	      case '2':
+	      case '3':
+	      case '4':
+		/* This operand must be the same as a previous one.
+		   This kind of constraint is used for instructions such
+		   as add when they take only two operands.
+
+		   Note that the lower-numbered operand is passed first.
+
+		   If we are not testing strictly, assume that this constraint
+		   will be satisfied.  */
+		if (strict < 0)
+		  val = 1;
+		else
+		  val = operands_match_p (recog_operand[c - '0'],
+					  recog_operand[opno]);
+
+		matching_operands[opno] = c - '0';
+		matching_operands[c - '0'] = opno;
+
+		if (val != 0)
+		  win = 1;
+		/* If output is *x and input is *--x,
+		   arrange later to change the output to *--x as well,
+		   since the output op is the one that will be printed.  */
+		if (val == 2 && strict > 0)
+		  {
+		    funny_match[funny_match_index].this = opno;
+		    funny_match[funny_match_index++].other = c - '0';
+		  }
+		break;
+
+	      case 'p':
+		/* p is used for address_operands.  When we are called by
+		   gen_reload, no one will have checked that the address is
+		   strictly valid, i.e., that all pseudos requiring hard regs
+		   have gotten them.  */
+		if (strict <= 0
+		    || (strict_memory_address_p
+			(insn_operand_mode[insn_code_num][opno], op)))
+		  win = 1;
+		break;
+
+		/* No need to check general_operand again;
+		   it was done in insn-recog.c.  */
+	      case 'g':
+		/* Anything goes unless it is a REG and really has a hard reg
+		   but the hard reg is not in the class GENERAL_REGS.  */
+		if (strict < 0
+		    || GENERAL_REGS == ALL_REGS
+		    || GET_CODE (op) != REG
+		    || (reload_in_progress
+			&& REGNO (op) >= FIRST_PSEUDO_REGISTER)
+		    || reg_fits_class_p (op, GENERAL_REGS, offset, mode))
+		  win = 1;
+		break;
+
+	      case 'r':
+		if (strict < 0
+		    || (strict == 0
+			&& GET_CODE (op) == REG
+			&& REGNO (op) >= FIRST_PSEUDO_REGISTER)
+		    || (strict == 0 && GET_CODE (op) == SCRATCH)
+		    || (GET_CODE (op) == REG
+			&& ((GENERAL_REGS == ALL_REGS
+			     && REGNO (op) < FIRST_PSEUDO_REGISTER)
+			    || reg_fits_class_p (op, GENERAL_REGS,
+						 offset, mode))))
+		  win = 1;
+		break;
+
+	      case 'X':
+		/* This is used for a MATCH_SCRATCH in the cases when we
+		   don't actually need anything.  So anything goes any time. */
+		win = 1;
+		break;
+
+	      case 'm':
+		if (GET_CODE (op) == MEM
+		    /* Before reload, accept what reload can turn into mem.  */
+		    || (strict < 0 && CONSTANT_P (op))
+		    /* During reload, accept a pseudo  */
+		    || (reload_in_progress && GET_CODE (op) == REG
+			&& REGNO (op) >= FIRST_PSEUDO_REGISTER))
+		  win = 1;
+		break;
+
+	      case '<':
+		if (GET_CODE (op) == MEM
+		    && (GET_CODE (XEXP (op, 0)) == PRE_DEC
+			|| GET_CODE (XEXP (op, 0)) == POST_DEC))
+		  win = 1;
+		break;
+
+	      case '>':
+		if (GET_CODE (op) == MEM
+		    && (GET_CODE (XEXP (op, 0)) == PRE_INC
+			|| GET_CODE (XEXP (op, 0)) == POST_INC))
+		  win = 1;
+		break;
+
+	      case 'E':
+#ifndef REAL_ARITHMETIC
+		/* Match any CONST_DOUBLE, but only if
+		   we can examine the bits of it reliably.  */
+		if ((HOST_FLOAT_FORMAT != TARGET_FLOAT_FORMAT
+		     || HOST_BITS_PER_WIDE_INT != BITS_PER_WORD)
+		    && GET_MODE (op) != VOIDmode && ! flag_pretend_float)
+		  break;
+#endif
+		if (GET_CODE (op) == CONST_DOUBLE)
+		  win = 1;
+		break;
+
+	      case 'F':
+		if (GET_CODE (op) == CONST_DOUBLE)
+		  win = 1;
+		break;
+
+	      case 'G':
+	      case 'H':
+		if (GET_CODE (op) == CONST_DOUBLE
+		    && CONST_DOUBLE_OK_FOR_LETTER_P (op, c))
+		  win = 1;
+		break;
+
+	      case 's':
+		if (GET_CODE (op) == CONST_INT
+		    || (GET_CODE (op) == CONST_DOUBLE
+			&& GET_MODE (op) == VOIDmode))
+		  break;
+	      case 'i':
+		if (CONSTANT_P (op))
+		  win = 1;
+		break;
+
+	      case 'n':
+		if (GET_CODE (op) == CONST_INT
+		    || (GET_CODE (op) == CONST_DOUBLE
+			&& GET_MODE (op) == VOIDmode))
+		  win = 1;
+		break;
+
+	      case 'I':
+	      case 'J':
+	      case 'K':
+	      case 'L':
+	      case 'M':
+	      case 'N':
+	      case 'O':
+	      case 'P':
+		if (GET_CODE (op) == CONST_INT
+		    && CONST_OK_FOR_LETTER_P (INTVAL (op), c))
+		  win = 1;
+		break;
+
+#ifdef EXTRA_CONSTRAINT
+              case 'Q':
+              case 'R':
+              case 'S':
+              case 'T':
+              case 'U':
+		if (EXTRA_CONSTRAINT (op, c))
+		  win = 1;
+		break;
+#endif
+
+	      case 'V':
+		if (GET_CODE (op) == MEM
+		    && ! offsettable_memref_p (op))
+		  win = 1;
+		break;
+
+	      case 'o':
+		if ((strict > 0 && offsettable_memref_p (op))
+		    || (strict == 0 && offsettable_nonstrict_memref_p (op))
+		    /* Before reload, accept what reload can handle.  */
+		    || (strict < 0
+			&& (CONSTANT_P (op) || GET_CODE (op) == MEM))
+		    /* During reload, accept a pseudo  */
+		    || (reload_in_progress && GET_CODE (op) == REG
+			&& REGNO (op) >= FIRST_PSEUDO_REGISTER))
+		  win = 1;
+		break;
+
+	      default:
+		if (strict < 0
+		    || (strict == 0
+			&& GET_CODE (op) == REG
+			&& REGNO (op) >= FIRST_PSEUDO_REGISTER)
+		    || (strict == 0 && GET_CODE (op) == SCRATCH)
+		    || (GET_CODE (op) == REG
+			&& reg_fits_class_p (op, REG_CLASS_FROM_LETTER (c),
+					     offset, mode)))
+		  win = 1;
+	      }
+
+	  constraints[opno] = p;
+	  /* If this operand did not win somehow,
+	     this alternative loses.  */
+	  if (! win)
+	    lose = 1;
+	}
+      /* This alternative won; the operands are ok.
+	 Change whichever operands this alternative says to change.  */
+      if (! lose)
+	{
+	  int opno, eopno;
+
+	  /* See if any earlyclobber operand conflicts with some other
+	     operand.  */
+
+	  if (strict > 0)
+	    for (eopno = 0; eopno < noperands; eopno++)
+	      /* Ignore earlyclobber operands now in memory,
+		 because we would often report failure when we have
+		 two memory operands, one of which was formerly a REG.  */
+	      if (earlyclobber[eopno]
+		  && GET_CODE (recog_operand[eopno]) == REG)
+		for (opno = 0; opno < noperands; opno++)
+		  if ((GET_CODE (recog_operand[opno]) == MEM
+		       || op_types[opno] != OP_OUT)
+		      && opno != eopno
+		      /* Ignore things like match_operator operands. */
+		      && *constraints[opno] != 0
+		      && ! (matching_operands[opno] == eopno
+			    && rtx_equal_p (recog_operand[opno],
+					    recog_operand[eopno]))
+		      && ! safe_from_earlyclobber (recog_operand[opno],
+						   recog_operand[eopno]))
+		    lose = 1;
+
+	  if (! lose)
+	    {
+	      while (--funny_match_index >= 0)
+		{
+		  recog_operand[funny_match[funny_match_index].other]
+		    = recog_operand[funny_match[funny_match_index].this];
+		}
+
+	      return 1;
+	    }
+	}
+
+      which_alternative++;
+    }
+
+  /* If we are about to reject this, but we are not to test strictly,
+     try a very loose test.  Only return failure if it fails also.  */
+  if (strict == 0)
+    return constrain_operands (insn_code_num, -1);
+  else
+    return 0;
+}
+
+/* Return 1 iff OPERAND (assumed to be a REG rtx)
+   is a hard reg in class CLASS when its regno is offsetted by OFFSET
+   and changed to mode MODE.
+   If REG occupies multiple hard regs, all of them must be in CLASS.  */
+
+int
+reg_fits_class_p (operand, class, offset, mode)
+     rtx operand;
+     register enum reg_class class;
+     int offset;
+     enum machine_mode mode;
+{
+  register int regno = REGNO (operand);
+  if (regno < FIRST_PSEUDO_REGISTER
+      && TEST_HARD_REG_BIT (reg_class_contents[(int) class],
+			    regno + offset))
+    {
+      register int sr;
+      regno += offset;
+      for (sr = HARD_REGNO_NREGS (regno, mode) - 1;
+	   sr > 0; sr--)
+	if (! TEST_HARD_REG_BIT (reg_class_contents[(int) class],
+				 regno + sr))
+	  break;
+      return sr == 0;
+    }
+
+  return 0;
+}
+
+#endif /* REGISTER_CONSTRAINTS */