Merge ^/vendor/binutils/dist@214571 into contrib/binutils, which brings

us up to version 2.17.50.20070703, at the last GPLv2 commit.

Amongst others, this added upstream support for some FreeBSD-specific
things that we previously had to manually hack in, such as the OSABI
label support, and so on.

There are also quite a number of new files, some for cpu's (e.g. SPU)
that we may or may not be interested in, but those can be cleaned up
later on, if needed.

1 files changed, 58 insertions, 48 deletions

diff --git a/contrib/binutils/gas/doc/Makefile.in b/contrib/binutils/gas/doc/Makefile.in
index cd9dad2..86f3d7a 100644
--- a/contrib/binutils/gas/doc/Makefile.in
+++ b/contrib/binutils/gas/doc/Makefile.in
@@ -37,11 +37,19 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = doc
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(as_TEXINFOS)
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/../bfd/warning.m4 $(top_srcdir)/../libtool.m4 \
-	$(top_srcdir)/../gettext.m4 $(top_srcdir)/configure.in
+am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \
+	$(top_srcdir)/../bfd/warning.m4 \
+	$(top_srcdir)/../config/depstand.m4 \
+	$(top_srcdir)/../config/gettext-sister.m4 \
+	$(top_srcdir)/../config/lead-dot.m4 \
+	$(top_srcdir)/../config/nls.m4 $(top_srcdir)/../config/po.m4 \
+	$(top_srcdir)/../config/progtest.m4 \
+	$(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
+	$(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
+	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
@@ -50,7 +58,7 @@ CONFIG_CLEAN_FILES =
 depcomp =
 am__depfiles_maybe =
 SOURCES =
-INFO_DEPS = $(srcdir)/as.info
+INFO_DEPS = as.info
 TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
 am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
 DVIS = as.dvi
@@ -68,16 +76,14 @@ NROFF = nroff
 MANS = $(man_MANS)
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
-ALL_OBJ_DEPS = @ALL_OBJ_DEPS@
 AMDEP_FALSE = @AMDEP_FALSE@
 AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
+AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
-BFDLIB = @BFDLIB@
-BFDVER_H = @BFDVER_H@
 CATALOGS = @CATALOGS@
 CATOBJEXT = @CATOBJEXT@
 CC = @CC@
@@ -89,29 +95,32 @@ CYGPATH_W = @CYGPATH_W@
 DATADIRNAME = @DATADIRNAME@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
+FGREP = @FGREP@
 GDBINIT = @GDBINIT@
-GMOFILES = @GMOFILES@
+GENCAT = @GENCAT@
+GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
+GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
 GMSGFMT = @GMSGFMT@
-GT_NO = @GT_NO@
-GT_YES = @GT_YES@
-INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
+GREP = @GREP@
+INCINTL = @INCINTL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 INSTOBJEXT = @INSTOBJEXT@
-INTLDEPS = @INTLDEPS@
-INTLLIBS = @INTLLIBS@
-INTLOBJS = @INTLOBJS@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LEX = @LEX@
 LEXLIB = @LEXLIB@
 LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBINTL = @LIBINTL@
+LIBINTL_DEP = @LIBINTL_DEP@
 LIBM = @LIBM@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
@@ -124,6 +133,8 @@ MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 MAKEINFO = @MAKEINFO@
 MKINSTALLDIRS = @MKINSTALLDIRS@
 MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+NM = @NM@
 NO_WERROR = @NO_WERROR@
 OBJEXT = @OBJEXT@
 OPCODES_LIB = @OPCODES_LIB@
@@ -134,19 +145,20 @@ PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
-POFILES = @POFILES@
 POSUB = @POSUB@
 RANLIB = @RANLIB@
+SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
 USE_NLS = @USE_NLS@
 VERSION = @VERSION@
 WARN_CFLAGS = @WARN_CFLAGS@
 XGETTEXT = @XGETTEXT@
 YACC = @YACC@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_RANLIB = @ac_ct_RANLIB@
 ac_ct_STRIP = @ac_ct_STRIP@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
@@ -179,10 +191,10 @@ includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 install_tooldir = @install_tooldir@
-l = @l@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 obj_format = @obj_format@
@@ -212,13 +224,20 @@ POD2MAN = pod2man --center="GNU Development Tools" \
 
 man_MANS = as.1
 info_TEXINFOS = as.texinfo 
-AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty"
-TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty"
+as_TEXINFOS = asconfig.texi $(CPU_DOCS)
+AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
+		   -I ../../bfd/doc
+
+TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
+		   -I ../../bfd/doc
+
 CPU_DOCS = \
 	c-alpha.texi \
 	c-arc.texi \
 	c-arm.texi \
+	c-avr.texi \
 	c-bfin.texi \
+	c-cr16.texi \
 	c-d10v.texi \
 	c-cris.texi \
 	c-h8300.texi \
@@ -254,14 +273,19 @@ html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 
 # This one isn't ready for prime time yet.  Not even a little bit.
 noinst_TEXINFOS = internals.texi
-MAINTAINERCLEANFILES = asconfig.texi gasver.texi
+MAINTAINERCLEANFILES = asconfig.texi as.info
 BASEDIR = $(srcdir)/../..
 BFDDIR = $(BASEDIR)/bfd
 CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+@GENINSRC_NEVER_TRUE@DISTCLEANFILES = as.info
 all: all-am
 
 .SUFFIXES:
-.SUFFIXES: .dvi .html .info .pdf .ps .texinfo
+.SUFFIXES: .dvi .ps
 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
@@ -271,9 +295,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  doc/Makefile'; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --cygnus  doc/Makefile'; \
 	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  doc/Makefile
+	  $(AUTOMAKE) --cygnus  doc/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -301,42 +325,38 @@ clean-libtool:
 distclean-libtool:
 	-rm -f libtool
 
-.texinfo.info:
+as.info: as.texinfo $(as_TEXINFOS)
 	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
-	am__cwd=`pwd` && cd $(srcdir) && \
 	rm -rf $$backupdir && mkdir $$backupdir && \
 	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
 	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
 	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
 	  done; \
 	else :; fi && \
-	cd "$$am__cwd"; \
 	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-	 -o $@ $<; \
+	 -o $@ `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo; \
 	then \
 	  rc=0; \
-	  cd $(srcdir); \
 	else \
 	  rc=$$?; \
-	  cd $(srcdir) && \
 	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
 	fi; \
 	rm -rf $$backupdir; exit $$rc
 
-.texinfo.dvi:
+as.dvi: as.texinfo $(as_TEXINFOS) 
 	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-	$(TEXI2DVI) $<
+	$(TEXI2DVI) -o $@ `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo
 
-.texinfo.pdf:
+as.pdf: as.texinfo $(as_TEXINFOS) 
 	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-	$(TEXI2PDF) $<
+	$(TEXI2PDF) -o $@ `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo
 
-.texinfo.html:
+as.html: as.texinfo $(as_TEXINFOS) 
 	rm -rf $(@:.html=.htp)
 	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-	 -o $(@:.html=.htp) $<; \
+	 -o $(@:.html=.htp) `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo; \
 	then \
 	  rm -rf $@; \
 	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
@@ -346,10 +366,6 @@ distclean-libtool:
 	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
 	  exit 1; \
 	fi
-$(srcdir)/as.info: as.texinfo 
-as.dvi: as.texinfo 
-as.pdf: as.texinfo 
-as.html: as.texinfo 
 .dvi.ps:
 	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 	$(DVIPS) -o $@ $<
@@ -481,6 +497,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -586,13 +603,6 @@ asconfig.texi: $(CONFIG).texi
 	cp $(srcdir)/$(CONFIG).texi ./asconfig.texi
 	chmod u+w ./asconfig.texi
 
-gasver.texi: $(srcdir)/../../bfd/configure
-	rm -f $@
-	eval `grep '^ *VERSION=' $(srcdir)/../../bfd/configure`; \
-	  echo "@set VERSION $$VERSION" > $@
-
-$(srcdir)/as.info as.dvi as.html: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
-
 # We want install to imply install-info as per GNU standards, despite the
 # cygnus option.
 install-data-local: install-info
@@ -624,7 +634,7 @@ info-local: $(MANS)
 # Build the man page from the texinfo file
 # The sed command removes the no-adjust Nroff command so that
 # the man output looks standard.
-as.1: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
+as.1: $(srcdir)/as.texinfo asconfig.texi $(CPU_DOCS)
 	touch $@
 	-$(TEXI2POD) $(MANCONF) < $(srcdir)/as.texinfo > as.pod
 	-($(POD2MAN) as.pod | \