Resolve conflicts from import of binutils-2.9.1.

Submitted by:	Doug Rabson <dfr>

1 files changed, 1200 insertions, 421 deletions

diff --git a/contrib/binutils/gas/configure b/contrib/binutils/gas/configure
index 9498428..93abf8e 100755
--- a/contrib/binutils/gas/configure
+++ b/contrib/binutils/gas/configure
@@ -1,7 +1,7 @@
 #! /bin/sh
 
 # Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12 
+# Generated automatically using autoconf version 2.12.1 
 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
 #
 # This configure script is free software; the Free Software Foundation
@@ -12,13 +12,24 @@ ac_help=
 ac_default_prefix=/usr/local
 # Any additions from configure.in:
 ac_help="$ac_help
+  --enable-shared         build shared libraries [default=yes]
+  --enable-shared=PKGS    only build shared libraries if the current package
+                          appears as an element in the PKGS list"
+ac_help="$ac_help
+  --enable-static         build static libraries [default=yes]
+  --enable-static=PKGS    only build shared libraries if the current package
+                          appears as an element in the PKGS list"
+ac_help="$ac_help
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
+ac_help="$ac_help
   --enable-bfd-assembler  use BFD back end for writing object files"
 ac_help="$ac_help
     targets            alternative target configurations besides the primary"
 ac_help="$ac_help
-  --enable-shared         build shared BFD library"
-ac_help="$ac_help
   --enable-commonbfdlib   build shared BFD/opcodes/libiberty library"
+ac_help="$ac_help
+  --enable-maintainer-mode enable make rules and dependencies not useful
+                          (and sometimes confusing) to the casual installer"
 
 # Initialize some variables set by options.
 # The variables have the same names as the options, with
@@ -57,6 +68,7 @@ mandir='${prefix}/man'
 # Initialize some other variables.
 subdirs=
 MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
 # Maximum number of lines to put in a shell here document.
 ac_max_here_lines=12
 
@@ -340,7 +352,7 @@ EOF
     verbose=yes ;;
 
   -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.12"
+    echo "configure generated by autoconf version 2.12.1"
     exit 0 ;;
 
   -with-* | --with-*)
@@ -525,54 +537,10 @@ else
   ac_n= ac_c='\c' ac_t=
 fi
 
-user_bfd_gas=
-# Check whether --enable-bfd-assembler or --disable-bfd-assembler was given.
-if test "${enable_bfd_assembler+set}" = set; then
-  enableval="$enable_bfd_assembler"
-  case "${enableval}" in
-  yes) need_bfd=yes user_bfd_gas=yes ;;
-  no)  user_bfd_gas=no ;;
-  *)   { echo "configure: error: bad value ${enableval} given for bfd-assembler option" 1>&2; exit 1; } ;;
-esac
-fi
-# Check whether --enable-targets or --disable-targets was given.
-if test "${enable_targets+set}" = set; then
-  enableval="$enable_targets"
-  case "${enableval}" in
-  yes | "") { echo "configure: error: enable-targets option must specify target names or 'all'" 1>&2; exit 1; }
-	    ;;
-  no)	    enable_targets= ;;
-  *)	    enable_targets=$enableval ;;
-esac
-fi
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  case "${enableval}" in
-  yes) shared=true shared_bfd=true shared_opcodes=true ;;
-  no)  shared=false ;;
-  *bfd*opcodes*) shared=true shared_bfd=true shared_opcodes=true ;;
-  *opcodes*bfd*) shared=true shared_bfd=true shared_opcodes=true ;;
-  *bfd*) shared=true shared_bfd=true ;;
-  *opcodes*) shared=true shared_opcodes=true ;;
-  *) shared=false ;;
-esac
-fi
-# Check whether --enable-commonbfdlib or --disable-commonbfdlib was given.
-if test "${enable_commonbfdlib+set}" = set; then
-  enableval="$enable_commonbfdlib"
-  case "${enableval}" in
-  yes) commonbfdlib=true ;;
-  no)  commonbfdlib=false ;;
-  *)   { echo "configure: error: bad value ${enableval} for BFD commonbfdlib option" 1>&2; exit 1; } ;;
-esac
-fi
-
-# Generate a header file -- gets more post-processing by Makefile later.
 
 
 ac_aux_dir=
-for ac_dir in `cd $srcdir;pwd`/.. $srcdir/`cd $srcdir;pwd`/..; do
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
   if test -f $ac_dir/install-sh; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install-sh -c"
@@ -584,7 +552,7 @@ for ac_dir in `cd $srcdir;pwd`/.. $srcdir/`cd $srcdir;pwd`/..; do
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/.. $srcdir/`cd $srcdir;pwd`/.." 1>&2; exit 1; }
+  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
 fi
 ac_config_guess=$ac_aux_dir/config.guess
 ac_config_sub=$ac_aux_dir/config.sub
@@ -613,33 +581,33 @@ esac
 
 
 # Make sure we can run config.sub.
-if $ac_config_sub sun4 >/dev/null 2>&1; then :
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
 else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:622: checking host system type" >&5
+echo "configure:590: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
 NONE)
   case $nonopt in
   NONE)
-    if host_alias=`$ac_config_guess`; then :
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
     else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
     fi ;;
   *) host_alias=$nonopt ;;
   esac ;;
 esac
 
-host=`$ac_config_sub $host_alias`
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
 host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
 host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:643: checking target system type" >&5
+echo "configure:611: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -650,14 +618,14 @@ NONE)
   esac ;;
 esac
 
-target=`$ac_config_sub $target_alias`
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
 target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
 target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:661: checking build system type" >&5
+echo "configure:629: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -668,7 +636,7 @@ NONE)
   esac ;;
 esac
 
-build=`$ac_config_sub $build_alias`
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
 build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
 build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
@@ -679,6 +647,110 @@ test "$host_alias" != "$target_alias" &&
     NONENONEs,x,x, &&
   program_prefix=${target_alias}-
 
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:664: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    # Account for people who put trailing slashes in PATH elements.
+    case "$ac_dir/" in
+    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+    *)
+      # OSF1 and SCO ODT 3.0 have their own names for install.
+      # Don't use installbsd from OSF since it installs stuff as root
+      # by default.
+      for ac_prog in ginstall scoinst install; do
+        if test -f $ac_dir/$ac_prog; then
+	  if test $ac_prog = install &&
+            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  else
+	    ac_cv_path_install="$ac_dir/$ac_prog -c"
+	    break 2
+	  fi
+	fi
+      done
+      ;;
+    esac
+  done
+  IFS="$ac_save_IFS"
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL="$ac_cv_path_install"
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL="$ac_install_sh"
+  fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
+echo "configure:718: checking whether build environment is sane" >&5
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftestfile`
+   fi
+   if test "$*" != "X $srcdir/configure conftestfile" \
+      && test "$*" != "X conftestfile $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" 1>&2; exit 1; }
+   fi
+
+   test "$2" = conftestfile
+   )
+then
+   # Ok.
+   :
+else
+   { echo "configure: error: newly created file is older than distributed files!
+Check your system clock" 1>&2; exit 1; }
+fi
+rm -f conftest*
+echo "$ac_t""yes" 1>&6
 if test "$program_transform_name" = s,x,x,; then
   program_transform_name=
 else
@@ -698,6 +770,588 @@ test "$program_suffix" != NONE &&
 # sed with no file args requires a program.
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:775: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftestmake <<\EOF
+all:
+	@echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+  eval ac_cv_prog_make_${ac_make}_set=yes
+else
+  eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  SET_MAKE=
+else
+  echo "$ac_t""no" 1>&6
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+
+PACKAGE=gas
+
+VERSION=2.9.1
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+fi
+cat >> confdefs.h <<EOF
+#define PACKAGE "$PACKAGE"
+EOF
+
+cat >> confdefs.h <<EOF
+#define VERSION "$VERSION"
+EOF
+
+
+
+missing_dir=`cd $ac_aux_dir && pwd`
+echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
+echo "configure:821: checking for working aclocal" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (aclocal --version) < /dev/null > /dev/null 2>&1; then
+   ACLOCAL=aclocal
+   echo "$ac_t""found" 1>&6
+else
+   ACLOCAL="$missing_dir/missing aclocal"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
+echo "configure:834: checking for working autoconf" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+   AUTOCONF=autoconf
+   echo "$ac_t""found" 1>&6
+else
+   AUTOCONF="$missing_dir/missing autoconf"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working automake""... $ac_c" 1>&6
+echo "configure:847: checking for working automake" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (automake --version) < /dev/null > /dev/null 2>&1; then
+   AUTOMAKE=automake
+   echo "$ac_t""found" 1>&6
+else
+   AUTOMAKE="$missing_dir/missing automake"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
+echo "configure:860: checking for working autoheader" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+   AUTOHEADER=autoheader
+   echo "$ac_t""found" 1>&6
+else
+   AUTOHEADER="$missing_dir/missing autoheader"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
+echo "configure:873: checking for working makeinfo" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+   MAKEINFO=makeinfo
+   echo "$ac_t""found" 1>&6
+else
+   MAKEINFO="$missing_dir/missing makeinfo"
+   echo "$ac_t""missing" 1>&6
+fi
+
+
+
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+  enableval="$enable_shared"
+  p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+  enable_shared=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_shared=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac
+else
+  enable_shared=yes
+fi
+
+# Check whether --enable-static or --disable-static was given.
+if test "${enable_static+set}" = set; then
+  enableval="$enable_static"
+  p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+  enable_static=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_static=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac
+else
+  enable_static=yes
+fi
+
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:936: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:965: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_CC="gcc"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:994: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  ac_prog_rejected=no
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+        ac_prog_rejected=yes
+	continue
+      fi
+      ac_cv_prog_CC="cc"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# -gt 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    set dummy "$ac_dir/$ac_word" "$@"
+    shift
+    ac_cv_prog_CC="$@"
+  fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:1042: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext <<EOF
+#line 1052 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+if { (eval echo configure:1056: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+  ac_cv_prog_cc_works=yes
+  # If we can't run a trivial program, we are probably using a cross compiler.
+  if (./conftest; exit) 2>/dev/null; then
+    ac_cv_prog_cc_cross=no
+  else
+    ac_cv_prog_cc_cross=yes
+  fi
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:1076: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:1081: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.c <<EOF
+#ifdef __GNUC__
+  yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1090: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+  ac_cv_prog_gcc=yes
+else
+  ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+  GCC=yes
+  ac_test_CFLAGS="${CFLAGS+set}"
+  ac_save_CFLAGS="$CFLAGS"
+  CFLAGS=
+  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1105: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+  ac_cv_prog_cc_g=yes
+else
+  ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+  if test "$ac_test_CFLAGS" = set; then
+    CFLAGS="$ac_save_CFLAGS"
+  elif test $ac_cv_prog_cc_g = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-O2"
+  fi
+else
+  GCC=
+  test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+  withval="$with_gnu_ld"
+  test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+
+ac_prog=ld
+if test "$ac_cv_prog_gcc" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
+echo "configure:1145: checking for ld used by GCC" >&5
+  ac_prog=`($CC -print-prog-name=ld) 2>&5`
+  case "$ac_prog" in
+  # Accept absolute paths.
+  /* | [A-Za-z]:\\*)
+    test -z "$LD" && LD="$ac_prog"
+    ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
+echo "configure:1163: checking for GNU ld" >&5
+else
+  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
+echo "configure:1166: checking for non-GNU ld" >&5
+fi
+if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -z "$LD"; then
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog"; then
+      ac_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some GNU ld's only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+	test "$with_gnu_ld" != no && break
+      else
+        test "$with_gnu_ld" != yes && break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+else
+  ac_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$ac_cv_path_LD"
+if test -n "$LD"; then
+  echo "$ac_t""$LD" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
+
+echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
+echo "configure:1202: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+  ac_cv_prog_gnu_ld=yes
+else
+  ac_cv_prog_gnu_ld=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
+
+
+echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
+echo "configure:1218: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$NM" in
+/* | [A-Za-z]:\\*)
+  ac_cv_path_NM="$NM" # Let the user override the test with a path.
+  ;;
+*)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/nm; then
+      # Check to see if the nm accepts a BSD-compat flag.
+      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+      #   nm: unknown option "B" ignored
+      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+        ac_cv_path_NM="$ac_dir/nm -B"
+      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+        ac_cv_path_NM="$ac_dir/nm -p"
+      else
+        ac_cv_path_NM="$ac_dir/nm"
+      fi
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+  ;;
+esac
+fi
+
+NM="$ac_cv_path_NM"
+echo "$ac_t""$NM" 1>&6
+
+
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:1255: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+  rm -f conftestdata
+  ac_cv_prog_LN_S="ln -s"
+else
+  ac_cv_prog_LN_S=ln
+fi
+fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+  echo "$ac_t""yes" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags=
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$silent" = yes && libtool_flags="$libtool_flags --silent"
+test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case "$host" in
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line 1291 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:1292: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+    case "`/usr/bin/file conftest.o`" in
+    *32-bit*)
+      LD="${LD-ld} -32"
+      ;;
+    *N32*)
+      LD="${LD-ld} -n32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  CFLAGS="$CFLAGS -belf"
+  ;;
+esac
+
+# Actually configure libtool.  ac_aux_dir is where install-sh is found.
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
+
+
+user_bfd_gas=
+# Check whether --enable-bfd-assembler or --disable-bfd-assembler was given.
+if test "${enable_bfd_assembler+set}" = set; then
+  enableval="$enable_bfd_assembler"
+  case "${enableval}" in
+  yes) need_bfd=yes user_bfd_gas=yes ;;
+  no)  user_bfd_gas=no ;;
+  *)   { echo "configure: error: bad value ${enableval} given for bfd-assembler option" 1>&2; exit 1; } ;;
+esac
+fi
+# Check whether --enable-targets or --disable-targets was given.
+if test "${enable_targets+set}" = set; then
+  enableval="$enable_targets"
+  case "${enableval}" in
+  yes | "") { echo "configure: error: enable-targets option must specify target names or 'all'" 1>&2; exit 1; }
+	    ;;
+  no)	    enable_targets= ;;
+  *)	    enable_targets=$enableval ;;
+esac
+fi
+# Check whether --enable-commonbfdlib or --disable-commonbfdlib was given.
+if test "${enable_commonbfdlib+set}" = set; then
+  enableval="$enable_commonbfdlib"
+  case "${enableval}" in
+  yes) commonbfdlib=true ;;
+  no)  commonbfdlib=false ;;
+  *)   { echo "configure: error: bad value ${enableval} for BFD commonbfdlib option" 1>&2; exit 1; } ;;
+esac
+fi
+
+# Generate a header file
+
+
+
 
 te_file=generic
 
@@ -734,9 +1388,13 @@ for this_target in $target $canon_targets ; do
     eval `echo $this_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
 
     # check for architecture variants
+    arch=
+    endian=
     case ${cpu} in
+      alpha*)		cpu_type=alpha ;;
       armeb)		cpu_type=arm endian=big ;;
       arm*)		cpu_type=arm endian=little ;;
+      thumb*)		cpu_type=arm endian=little ;;
       hppa*)		cpu_type=hppa ;;
       i[456]86)		cpu_type=i386 ;;
       m680[012346]0)	cpu_type=m68k ;;
@@ -748,18 +1406,31 @@ for this_target in $target $canon_targets ; do
       powerpcle*)	cpu_type=ppc endian=little ;;
       powerpc*)		cpu_type=ppc endian=big ;;
       rs6000*)		cpu_type=ppc ;;
-      sparc64)		cpu_type=sparc want_sparc_v9=true ;;
-      sparc*)		cpu_type=sparc ;;
+      sparclite*)	cpu_type=sparc arch=sparclite ;;
+      sparclet*)	cpu_type=sparc arch=sparclet ;;
+      sparc64*)		cpu_type=sparc arch=v9-64 ;;
+      sparc*)		cpu_type=sparc arch=sparclite ;; # ??? See tc-sparc.c.
+      v850*)		cpu_type=v850 ;;
       *)		cpu_type=${cpu} ;;
     esac
 
     if test ${this_target} = $target ; then
       target_cpu_type=${cpu_type}
+      if test x${endian} = xbig; then
+	cat >> confdefs.h <<\EOF
+#define TARGET_BYTES_BIG_ENDIAN 1
+EOF
+
+      elif test x${endian} = xlittle; then
+	cat >> confdefs.h <<\EOF
+#define TARGET_BYTES_BIG_ENDIAN 0
+EOF
+
+      fi
     elif test ${target_cpu_type} != ${cpu_type} ; then
       continue
     fi
 
-    targ=${cpu_type}
     generic_target=${cpu_type}-$vendor-$os
     dev=no
     bfd_gas=no
@@ -767,31 +1438,28 @@ for this_target in $target $canon_targets ; do
 
     # assign object format
     case ${generic_target} in
-      a29k-*-coff)          fmt=coff targ=ebmon29k ;;
-      a29k-amd-udi)         fmt=coff targ=ebmon29k ;;
-      a29k-amd-ebmon)       fmt=coff targ=ebmon29k ;;
-      a29k-nyu-sym1)        fmt=coff targ=ebmon29k ;;
+      a29k-*-coff)          fmt=coff ;;
+      a29k-amd-udi)         fmt=coff ;;
+      a29k-amd-ebmon)       fmt=coff ;;
+      a29k-nyu-sym1)        fmt=coff ;;
       a29k-*-vxworks*)      fmt=coff ;;
 
-      alpha-*-*vms*)	    fmt=evax ;;
+      alpha*-*-*vms*)	    fmt=evax ;;
       alpha-*-freebsd*)     fmt=elf em=freebsd ;;
-      alpha-*-netware*)     fmt=ecoff ;;
-      alpha-*-openbsd*)     fmt=ecoff ;;
-      alpha-*-osf*)         fmt=ecoff ;;
-      alpha-*-linuxecoff*)  fmt=ecoff ;;
-      alpha-*-linux*)       fmt=elf em=linux ;;
-
-
-      arm-*-riscix*)	    fmt=aout targ=arm-lit em=riscix ;;
-      arm-*-aout)	    fmt=aout
-			    case "$endian" in
-			      big)	targ=arm-big ;;
-			      *)	targ=arm-lit ;;
-			    esac
-			    ;;
-      arm-*-coff)           fmt=coff ;;
+      alpha*-*-netware*)    fmt=ecoff ;;
+      alpha*-*-openbsd*)    fmt=ecoff ;;
+      alpha*-*-osf*)        fmt=ecoff ;;
+      alpha*-*-linuxecoff*) fmt=ecoff ;;
+      alpha*-*-linux-gnu*)  fmt=elf em=linux ;;
+      alpha*-*-netbsd*)     fmt=elf em=nbsd ;;
+
+      arc-*-elf*)           fmt=elf bfd_gas=yes ;;
+
+      arm-*-riscix*)	    fmt=aout em=riscix ;;
+      arm-*-aout)	    fmt=aout ;;
+      arm-*-coff | thumb-*-coff)           fmt=coff ;;
       arm-*-riscix*)        fmt=aout ;;
-      arm-*-pe)             fmt=coff targ=armcoff em=pe ;;
+      arm-*-pe | thumb-*-pe)               fmt=coff em=pe ;;
 
       d10v-*-*)		    fmt=elf bfd_gas=yes ;;
 
@@ -805,142 +1473,128 @@ for this_target in $target $canon_targets ; do
 
       h8300-*-coff)         fmt=coff ;;
 
-      i386-ibm-aix*)        fmt=coff targ=i386coff
-			     em=i386aix ;;
+      i386-ibm-aix*)        fmt=coff em=i386aix ;;
       i386-sequent-bsd*)    fmt=aout em=dynix bfd_gas=yes ;;
       i386-*-bsd*)          fmt=aout em=386bsd ;;
       i386-*-netbsd0.8)     fmt=aout em=386bsd ;;
       i386-*-netbsd*)       fmt=aout em=nbsd bfd_gas=yes;;
       i386-*-openbsd*)      fmt=aout em=nbsd bfd_gas=yes;;
       i386-*-linux*aout* | i386-*-linuxoldld)   fmt=aout em=linux ;;
-      i386-*-linux*coff*)   fmt=coff em=linux
-			     targ=i386coff ;;
-      i386-*-linux*)        fmt=elf em=linux ;;
-      i386-*-lynxos*)       fmt=coff targ=i386coff
-			     em=lynx ;;
+      i386-*-linux*coff*)   fmt=coff em=linux ;;
+      i386-*-linux-gnu*)    fmt=elf em=linux ;;
+      i386-*-lynxos*)       fmt=coff em=lynx ;;
       i386-*-sysv4* | i386-*-solaris* | i386-*-elf)
 			    fmt=elf ;;
-      i386-*-freebsdelf*)   fmt=elf em=freebsd ;;
+      i386-*-freebsdelf*)   fmt=elf em=freebsd;;
       i386-*-freebsd*)      fmt=aout em=freebsd bfd_gas=yes ;;
-      i386-*-sco*elf*)      fmt=elf targ=sco5 ;;
-      i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
-			    fmt=coff targ=i386coff ;;
+      i386-*-coff | i386-*-sysv* | i386-*-sco3.2v5*coff | i386-*-isc*)
+                          fmt=coff ;;
+      i386-*-sco3.2v5*)      fmt=elf
+			    if test ${this_target} = $target; then
+				cat >> confdefs.h <<\EOF
+#define SCO_ELF 1
+EOF
+
+			    fi
+			    ;;
+      i386-*-sco3.2*)       fmt=coff ;;
       i386-*-vsta)          fmt=aout ;;
-      i386-*-go32)          fmt=coff targ=i386coff ;;
-      i386-*-rtems*)        fmt=coff targ=i386coff ;;
+      i386-*-msdosdjgpp* | i386-*-go32* | i386-go32-rtems*)
+			    fmt=coff em=go32;;
+      i386-*-rtems*)        fmt=coff ;;
       i386-*-gnu*)          fmt=elf ;;
       i386-*-mach*)
 			    fmt=aout em=mach bfd_gas=yes ;;
       i386-*-msdos*)        fmt=aout ;;
       i386-*-moss*)	    fmt=elf ;;
-      i386-*-pe)            fmt=coff targ=i386coff em=pe ;;
-      i386-*-cygwin32)      fmt=coff targ=i386coff em=pe ;;
-      i386-*-*nt)           fmt=coff targ=i386coff em=pe ;;
+      i386-*-pe)            fmt=coff em=pe ;;
+      i386-*-cygwin32*)     fmt=coff em=pe bfd_gas=yes ;;
+      i386-*-mingw32*)      fmt=coff em=pe bfd_gas=yes ;;
+      i386-*-*nt*)          fmt=coff em=pe ;;
       i960-*-bout)          fmt=bout ;;
-      i960-*-coff)          fmt=coff em=ic960 targ=ic960coff ;;
-      i960-*-rtems*)        fmt=coff em=ic960 targ=ic960coff ;;
+      i960-*-coff)          fmt=coff em=ic960 ;;
+      i960-*-rtems*)        fmt=coff em=ic960 ;;
       i960-*-nindy*)        fmt=bout ;;
       i960-*-vxworks4*)     fmt=bout ;;
       i960-*-vxworks5.0)    fmt=bout ;;
-      i960-*-vxworks5.*)    fmt=coff em=ic960 targ=ic960coff ;;
+      i960-*-vxworks5.*)    fmt=coff em=ic960 ;;
       i960-*-vxworks*)      fmt=bout ;;
 
       m32r-*-*)		    fmt=elf bfd_gas=yes ;;
 
       m68k-*-vxworks* | m68k-ericsson-ose | m68k-*-sunos*)
 			    fmt=aout em=sun3 ;;
-      m68k-motorola-sysv*)  fmt=coff targ=m68kcoff em=delta ;;
-      m68k-bull-sysv3*)     fmt=coff targ=m68kcoff em=dpx2 ;;
-      m68k-apollo-*)        fmt=coff targ=apollo em=apollo ;;
+      m68k-motorola-sysv*)  fmt=coff em=delta ;;
+      m68k-bull-sysv3*)     fmt=coff em=dpx2 ;;
+      m68k-apollo-*)        fmt=coff em=apollo ;;
       m68k-*-sysv4*) # must be before -sysv*
 			    fmt=elf em=svr4 ;;
       m68k-*-elf*)	    fmt=elf ;;
       m68k-*-coff | m68k-*-sysv* | m68k-*-rtems*)
-			    fmt=coff targ=m68kcoff ;;
+			    fmt=coff ;;
       m68k-*-hpux*)         fmt=hp300 em=hp300 ;;
       m68k-*-linux*aout*)   fmt=aout em=linux ;;
-      m68k-*-linux*)	    fmt=elf em=linux ;;
-      m68k-*-lynxos*)       fmt=coff targ=m68kcoff
-			     em=lynx ;;
+      m68k-*-linux-gnu*)    fmt=elf em=linux ;;
+      m68k-*-lynxos*)       fmt=coff em=lynx ;;
       m68k-*-netbsd*)       fmt=aout em=nbsd bfd_gas=yes ;;
       m68k-*-openbsd*)      fmt=aout em=nbsd bfd_gas=yes ;;
-      m68k-apple-aux*)      fmt=coff targ=m68kcoff em=aux ;;
+      m68k-apple-aux*)      fmt=coff em=aux ;;
       m68k-*-psos*)         fmt=elf em=psos;;
 
-      m88k-motorola-sysv3*) fmt=coff targ=m88kcoff em=delt88 ;;
-      m88k-*-coff*)         fmt=coff targ=m88kcoff ;;
+      m88k-motorola-sysv3*) fmt=coff em=delt88 ;;
+      m88k-*-coff*)         fmt=coff ;;
 
       # don't change em like *-*-bsd does
-      mips-dec-netbsd*)	    fmt=elf targ=mips-lit endian=little ;;
-      mips-dec-openbsd*)    fmt=elf targ=mips-lit endian=little ;;
-      mips-dec-bsd*)        fmt=aout targ=mips-lit ;;
-      mips-sony-bsd*)       fmt=ecoff targ=mips-big ;;
+      mips-dec-netbsd*)	    fmt=elf endian=little ;;
+      mips-dec-openbsd*)    fmt=elf endian=little ;;
+      mips-dec-bsd*)        fmt=aout ;;
+      mips-sony-bsd*)       fmt=ecoff ;;
       mips-*-bsd*)          { echo "configure: error: Unknown vendor for mips-bsd configuration." 1>&2; exit 1; } ;;
-      mips-*-ultrix*)       fmt=ecoff targ=mips-lit endian=little ;;
-      mips-*-osf*)          fmt=ecoff targ=mips-lit endian=little ;;
-      mips-*-ecoff*)        fmt=ecoff 
-			    case "$endian" in
-			    big) targ=mips-big ;;
-			    *)   targ=mips-lit ;;
-			    esac
-			    ;;
-      mips-*-ecoff*)        fmt=ecoff targ=mips-big ;;
-      mips-*-irix6*)	    fmt=elf targ=mips-big ;;
-      mips-*-irix5*)        fmt=elf targ=mips-big ;;
-      mips-*-irix*)         fmt=ecoff targ=mips-big ;;
-      mips-*-lnews*)        fmt=ecoff targ=mips-lit em=lnews ;;
-      mips-*-riscos*)       fmt=ecoff targ=mips-big ;;
-      mips-*-sysv*)         fmt=ecoff targ=mips-big ;;
-      mips-*-elf* | mips-*-rtems* | mips-*-linux* | mips-*-gnu* | mips-*-openbsd*)
-			    fmt=elf 
-			    case "$endian" in
-			    big) targ=mips-big ;;
-			    *)   targ=mips-lit ;;
-			    esac
-			    ;;
+      mips-*-ultrix*)       fmt=ecoff endian=little ;;
+      mips-*-osf*)          fmt=ecoff endian=little ;;
+      mips-*-ecoff*)        fmt=ecoff ;;
+      mips-*-ecoff*)        fmt=ecoff ;;
+      mips-*-irix6*)	    fmt=elf ;;
+      mips-*-irix5*)        fmt=elf ;;
+      mips-*-irix*)         fmt=ecoff ;;
+      mips-*-lnews*)        fmt=ecoff em=lnews ;;
+      mips-*-riscos*)       fmt=ecoff ;;
+      mips-*-sysv*)         fmt=ecoff ;;
+      mips-*-elf* | mips-*-rtems* | mips-*-linux-gnu* | mips-*-gnu* | mips-*-openbsd*)
+			    fmt=elf ;;
       mn10200-*-*)	    fmt=elf bfd_gas=yes ;;
       mn10300-*-*)	    fmt=elf bfd_gas=yes ;;
       ppc-*-pe | ppc-*-cygwin32 | ppc-*-winnt*)
-		            fmt=coff em=pe 
-			    case "$endian" in
-			    big) targ=ppc-big ;;
-			    *)   targ=ppc-lit ;;
-			    esac
-                            ;;
+		            fmt=coff em=pe ;;
       ppc-*-aix*)           fmt=coff ;;
       ppc-*-beos*)          fmt=coff ;;
       ppc-*-*bsd* | ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
-			    fmt=elf
-			    case "$endian" in
-			    big)  targ=ppc-big ;;
-			    *)    targ=ppc-lit ;;
-			    esac
-			    ;;
-      ppc-*-linux*)	    fmt=elf
+			    fmt=elf ;;
+      ppc-*-linux-gnu*)	    fmt=elf
 			    case "$endian" in
-			    big)  targ=ppc-big ;;
-			    *)    { echo "configure: error: Linux must be configured big endian" 1>&2; exit 1; } ;;
+			    big)  ;;
+			    *)    { echo "configure: error: GNU/Linux must be configured big endian" 1>&2; exit 1; } ;;
 			    esac
 			    ;;
       ppc-*-solaris*)	    fmt=elf
-			    case "$endian" in
-			    big)  { echo "configure: error: Solaris must be configured little endian" 1>&2; exit 1; } ;;
-			    *)    targ=ppc-sol ;;
-			    esac
-			    ;;
-      ppc-*-rtems*)
-			    fmt=elf
-			    case "$endian" in
-			    big)  targ=ppc-big ;;
-			    *)    targ=ppc-lit ;;
-			    esac
+			    if test ${this_target} = $target; then
+				cat >> confdefs.h <<\EOF
+#define TARGET_SOLARIS_COMMENT 1
+EOF
+
+			    fi
+			    if test x${endian} = xbig; then
+				{ echo "configure: error: Solaris must be configured little endian" 1>&2; exit 1; }
+			    fi
 			    ;;
+      ppc-*-rtems*)	    fmt=elf ;;
       ppc-*-macos* | ppc-*-mpw*)
 			    fmt=coff em=macos ;;
       ppc-*-netware*)       fmt=elf em=ppcnw ;;
 
       sh-*-elf*)	    fmt=elf ;;
       sh-*-coff*)           fmt=coff ;;
+      sh-*-rtems*)	    fmt=coff ;;
 
       ns32k-pc532-mach* | ns32k-pc532-ux*)    fmt=aout em=pc532mach ;;
       ns32k-pc532-netbsd* | ns32k-pc532-lites*)  fmt=aout em=nbsd532 ;;
@@ -952,7 +1606,7 @@ for this_target in $target $canon_targets ; do
 			    fmt=aout em=sparcaout ;;
       sparc-*-coff)         fmt=coff ;;
       sparc-*-linux*aout*)  fmt=aout em=linux ;;
-      sparc-*-linux*)	    fmt=elf em=linux ;;
+      sparc-*-linux-gnu*)   fmt=elf em=linux ;;
       sparc-*-lynxos*)      fmt=coff em=lynx ;;
       sparc-fujitsu-none)   fmt=aout ;;
       sparc-*-elf | sparc-*-sysv4* | sparc-*-solaris*)
@@ -960,6 +1614,12 @@ for this_target in $target $canon_targets ; do
       sparc-*-netbsd*)      fmt=aout em=nbsd bfd_gas=yes ;;
       sparc-*-openbsd*)     fmt=aout em=nbsd bfd_gas=yes ;;
 
+      tic30-*-*aout*)	    fmt=aout bfd_gas=yes ;;
+      tic30-*-*coff*)       fmt=coff bfd_gas=yes ;;
+
+
+      v850-*-*)		    fmt=elf bfd_gas=yes ;;
+
       vax-*-bsd* | vax-*-ultrix*)
 			    fmt=aout ;;
       vax-*-vms)            fmt=vms ;;
@@ -986,7 +1646,7 @@ for this_target in $target $canon_targets ; do
     esac
 
     case ${cpu_type}-${fmt} in
-      alpha-*)	bfd_gas=yes ;;
+      alpha*-*)	bfd_gas=yes ;;
       arm-*)	bfd_gas=yes ;;
     # not yet
     # i386-aout)	bfd_gas=preferred ;;
@@ -1004,10 +1664,16 @@ for this_target in $target $canon_targets ; do
 
     # do we need the opcodes library?
     case ${cpu_type} in
-      vax | i386)
+      vax | i386 | tic30)
 	;;
       *)
 	need_opcodes=yes
+
+	case "${enable_shared}" in
+	yes) shared_opcodes=true ;;
+	*opcodes*) shared_opcodes=true ;;
+	*) shared_opcodes=false ;;
+	esac
 	if test "${shared_opcodes}" = "true"; then
 	  # A shared libopcodes must be linked against libbfd.
 	  need_bfd=yes
@@ -1015,18 +1681,6 @@ for this_target in $target $canon_targets ; do
 	;;
     esac
 
-    test -n "$want_sparc_v9" && cat >> confdefs.h <<\EOF
-#define SPARC_V9 1
-EOF
-
-
-    case ${cpu}-${vendor}-${os} in
-      sparc64-*-elf*) cat >> confdefs.h <<\EOF
-#define SPARC_ARCH64 1
-EOF
- ;;
-    esac
-
     case ${cpu_type} in
       m32r)
 	case ${extra_objects} in
@@ -1064,6 +1718,15 @@ EOF
 	fi
 	;;
 
+      sparc)
+	if test $this_target = $target ; then
+	  cat >> confdefs.h <<EOF
+#define DEFAULT_ARCH "${arch}"
+EOF
+
+	fi
+	;;
+
       *)
 	;;
     esac
@@ -1073,7 +1736,6 @@ EOF
     if test $this_target = $target ; then
       primary_bfd_gas=$bfd_gas
       obj_format=$fmt
-      gas_target=$targ
       te_file=$em
 
       if test $bfd_gas = no ; then
@@ -1089,7 +1751,7 @@ EOF
 
     case ${generic_target}-${fmt} in
       mips-*-irix5*-*)	emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
-      mips-*-linux*-*)	case "$endian" in
+      mips-*-linux-gnu*-*) case "$endian" in
 			big)	emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
 			*)	emulation="mipslelf mipsbelf mipself mipslecoff mipsbecoff mipsecoff" ;;
 			esac ;;
@@ -1133,14 +1795,6 @@ if test ! -r ${srcdir}/config/obj-${obj_format}.c; then
   { echo "configure: error: GAS does not have support for object file format ${obj_format}" 1>&2; exit 1; }
 fi
 
-# and target makefile frag
-
-target_frag=${srcdir}/config/${gas_target}.mt
-if test ! -r ${target_frag}; then
-  target_frag=/dev/null # ick! but subst_file can't be conditionalized
-fi
-
-
 case ${user_bfd_gas}-${primary_bfd_gas} in
   yes-yes | no-no)
     # We didn't override user's choice.
@@ -1352,68 +2006,14 @@ esac
 # do we need the opcodes library?
 case "${need_opcodes}" in
 yes)
-  OPCODES_DEP=../opcodes/libopcodes.a
-  OPCODES_LIB='-L../opcodes -lopcodes'
-
-  # We need to handle some special cases for shared libraries.
-  case "${host}" in
-  *-*-sunos*)
-    # On SunOS, we must link against the name we are going to install,
-    # not -lbfd, since SunOS does not support SONAME.
-    if test "${shared_opcodes}" = "true"; then
-      OPCODES_LIB='-L../opcodes -l`echo opcodes | sed '"'"'$(program_transform_name)'"'"'`'
-    fi
-    ;;
-  alpha*-*-osf*)
-    # On Alpha OSF/1, the native linker searches all the -L
-    # directories for any LIB.so files, and only then searches for any
-    # LIB.a files.  That means that if there is an installed
-    # libbfd.so, but this build is not done with --enable-shared, the
-    # link will wind up being against the install libbfd.so rather
-    # than the newly built libbfd.  To avoid this, we must explicitly
-    # link against libbfd.a when --enable-shared is not used.
-    if test "${shared_opcodes}" != "true"; then
-      OPCODES_LIB='../opcodes/libopcodes.a'
-    fi
-    ;;
-  esac
+  OPCODES_LIB=../opcodes/libopcodes.la
   ;;
 esac
 
 case "${need_bfd}" in
 yes)
-  BFDDEP=../bfd/libbfd.a
-  BFDLIB='-L../bfd -lbfd'
+  BFDLIB=../bfd/libbfd.la
   ALL_OBJ_DEPS="$ALL_OBJ_DEPS ../bfd/bfd.h"
-
-  # We need to handle some special cases for shared libraries
-  case "${host}" in
-  *-*-sunos*)
-    # On SunOS, we must link against the name we are going to install,
-    # not -lbfd, since SunOS does not support SONAME.
-    if test "${shared_bfd}" = "true"; then
-      BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`'
-    fi
-    ;;
-  alpha*-*-osf*)
-    # On Alpha OSF/1, the native linker searches all the -L
-    # directories for any LIB.so files, and only then searches for any
-    # LIB.a files.  That means that if there is an installed
-    # libbfd.so, but this build is not done with --enable-shared, the
-    # link will wind up being against the install libbfd.so rather
-    # than the newly built libbfd.  To avoid this, we must explicitly
-    # link against libbfd.a when --enable-shared is not used.
-    if test "${shared_bfd}" != "true"; then
-      BFDLIB='../bfd/libbfd.a'
-    fi
-    ;;
-  esac
-
-  if test "${commonbfdlib}" = "true"; then
-    # when a shared libbfd is built with --enable-commonbfdlib,
-    # all of libopcodes is available in libbfd.so
-    OPCODES_LIB=
-  fi
   ;;
 esac
 
@@ -1422,8 +2022,6 @@ esac
 
 
 
-
-
 cat >> confdefs.h <<EOF
 #define TARGET_ALIAS "${target_alias}"
 EOF
@@ -1448,7 +2046,7 @@ EOF
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1449: checking for $ac_word" >&5
+echo "configure:2049: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1477,7 +2075,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1478: checking for $ac_word" >&5
+echo "configure:2078: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1525,7 +2123,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1526: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2126: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1535,11 +2133,11 @@ ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS
 cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext <<EOF
-#line 1536 "configure"
+#line 2136 "configure"
 #include "confdefs.h"
 main(){return(0);}
 EOF
-if { (eval echo configure:1540: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2140: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1559,12 +2157,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1560: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2160: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1565: checking whether we are using GNU C" >&5
+echo "configure:2165: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1573,7 +2171,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1574: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2174: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1588,7 +2186,7 @@ if test $ac_cv_prog_gcc = yes; then
   ac_save_CFLAGS="$CFLAGS"
   CFLAGS=
   echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1589: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2189: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1615,69 +2213,120 @@ else
   test "${CFLAGS+set}" = set || CFLAGS="-g"
 fi
 
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1627: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+
+for ac_prog in 'bison -y' byacc
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2222: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+  if test -n "$YACC"; then
+  ac_cv_prog_YACC="$YACC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
   for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      for ac_prog in ginstall installbsd scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    # OSF/1 installbsd also uses dspmsg, but is usable.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_YACC="$ac_prog"
+      break
+    fi
   done
-  IFS="$ac_save_IFS"
+  IFS="$ac_save_ifs"
+fi
+fi
+YACC="$ac_cv_prog_YACC"
+if test -n "$YACC"; then
+  echo "$ac_t""$YACC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
 
+test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="yacc"
+
+# Extract the first word of "flex", so it can be a program name with args.
+set dummy flex; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2254: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$LEX"; then
+  ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_LEX="flex"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex"
 fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
 fi
-echo "$ac_t""$INSTALL" 1>&6
+LEX="$ac_cv_prog_LEX"
+if test -n "$LEX"; then
+  echo "$ac_t""$LEX" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
 
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+if test -z "$LEXLIB"
+then
+  case "$LEX" in
+  flex*) ac_lib=fl ;;
+  *) ac_lib=l ;;
+  esac
+  echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
+echo "configure:2287: checking for yywrap in -l$ac_lib" >&5
+ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-l$ac_lib  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2295 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char yywrap();
 
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+int main() {
+yywrap()
+; return 0; }
+EOF
+if { (eval echo configure:2306: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
 
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  LEXLIB="-l$ac_lib"
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1678: checking how to run the C preprocessor" >&5
+echo "configure:2329: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -1692,13 +2341,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 1693 "configure"
+#line 2344 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1699: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2350: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   :
@@ -1709,13 +2358,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 1710 "configure"
+#line 2361 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1716: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2367: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   :
@@ -1737,21 +2386,187 @@ else
 fi
 echo "$ac_t""$CPP" 1>&6
 
+echo $ac_n "checking lex output file root""... $ac_c" 1>&6
+echo "configure:2390: checking lex output file root" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  # The minimal lex program is just a single line: %%.  But some broken lexes
+# (Solaris, I think it was) want two %% lines, so accommodate them.
+echo '%%
+%%' | $LEX
+if test -f lex.yy.c; then
+  ac_cv_prog_lex_root=lex.yy
+elif test -f lexyy.c; then
+  ac_cv_prog_lex_root=lexyy
+else
+  { echo "configure: error: cannot find output from $LEX; giving up" 1>&2; exit 1; }
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_lex_root" 1>&6
+LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
+
+echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
+echo "configure:2411: checking whether yytext is a pointer" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  # POSIX says lex can declare yytext either as a pointer or an array; the
+# default is implementation-dependent. Figure out which it is, since
+# not all implementations provide the %pointer and %array declarations.
+ac_cv_prog_lex_yytext_pointer=no
+echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c
+ac_save_LIBS="$LIBS"
+LIBS="$LIBS $LEXLIB"
+cat > conftest.$ac_ext <<EOF
+#line 2423 "configure"
+#include "confdefs.h"
+`cat $LEX_OUTPUT_ROOT.c`
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:2430: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+  rm -rf conftest*
+  ac_cv_prog_lex_yytext_pointer=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+rm -f "${LEX_OUTPUT_ROOT}.c"
+
+fi
+
+echo "$ac_t""$ac_cv_prog_lex_yytext_pointer" 1>&6
+if test $ac_cv_prog_lex_yytext_pointer = yes; then
+  cat >> confdefs.h <<\EOF
+#define YYTEXT_POINTER 1
+EOF
+
+fi
+
+
+echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
+echo "configure:2453: checking whether to enable maintainer-specific portions of Makefiles" >&5
+    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+  enableval="$enable_maintainer_mode"
+  USE_MAINTAINER_MODE=$enableval
+else
+  USE_MAINTAINER_MODE=no
+fi
+
+  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
+  if test $USE_MAINTAINER_MODE = yes; then
+    MAINT=
+  else
+    MAINT='#M#'
+  fi
+  
+
+echo $ac_n "checking for Cygwin32 environment""... $ac_c" 1>&6
+echo "configure:2471: checking for Cygwin32 environment" >&5
+if eval "test \"`echo '$''{'am_cv_cygwin32'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2476 "configure"
+#include "confdefs.h"
+
+int main() {
+return __CYGWIN32__;
+; return 0; }
+EOF
+if { (eval echo configure:2483: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  am_cv_cygwin32=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  am_cv_cygwin32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$am_cv_cygwin32" 1>&6
+CYGWIN32=
+test "$am_cv_cygwin32" = yes && CYGWIN32=yes
+echo $ac_n "checking for Mingw32 environment""... $ac_c" 1>&6
+echo "configure:2500: checking for Mingw32 environment" >&5
+if eval "test \"`echo '$''{'am_cv_mingw32'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2505 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:2512: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  am_cv_mingw32=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  am_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$am_cv_mingw32" 1>&6
+MINGW32=
+test "$am_cv_mingw32" = yes && MINGW32=yes
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:2531: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$CYGWIN32" = yes || test "$MINGW32" = yes; then
+am_cv_exeext=.exe
+else
+cat > am_c_test.c << 'EOF'
+int main() {
+/* Nothing needed here */
+}
+EOF
+${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
+am_cv_exeext=`echo am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//`
+rm -f am_c_test*
+fi
+
+test x"${am_cv_exeext}" = x && am_cv_exeext=no
+fi
+EXEEXT=""
+test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext}
+echo "$ac_t""${am_cv_exeext}" 1>&6
+
+
 for ac_hdr in string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1742: checking for $ac_hdr" >&5
+echo "configure:2559: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1747 "configure"
+#line 2564 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1752: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2569: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1781,7 +2596,7 @@ done
 # Put this here so that autoconf's "cross-compiling" message doesn't confuse
 # people who are not cross-compiling but are compiling cross-assemblers.
 echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6
-echo "configure:1782: checking whether compiling a cross-assembler" >&5
+echo "configure:2599: checking whether compiling a cross-assembler" >&5
 if test "${host}" = "${target}"; then
   cross_gas=no
 else
@@ -1796,19 +2611,19 @@ echo "$ac_t""$cross_gas" 1>&6
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:1797: checking for working alloca.h" >&5
+echo "configure:2614: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1802 "configure"
+#line 2619 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:1809: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2626: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -1829,12 +2644,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:1830: checking for alloca" >&5
+echo "configure:2647: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1835 "configure"
+#line 2652 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -1857,7 +2672,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:1858: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2675: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -1889,12 +2704,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:1890: checking whether alloca needs Cray hooks" >&5
+echo "configure:2707: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1895 "configure"
+#line 2712 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -1919,12 +2734,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1920: checking for $ac_func" >&5
+echo "configure:2737: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1925 "configure"
+#line 2742 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1947,7 +2762,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:1948: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2765: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -1974,7 +2789,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:1975: checking stack direction for C alloca" >&5
+echo "configure:2792: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1982,7 +2797,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 1983 "configure"
+#line 2800 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -2001,7 +2816,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:2002: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2819: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -2023,21 +2838,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2024: checking for inline" >&5
+echo "configure:2841: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 2031 "configure"
+#line 2848 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:2038: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2855: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -2067,12 +2882,12 @@ esac
 for ac_func in unlink remove
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2068: checking for $ac_func" >&5
+echo "configure:2885: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2073 "configure"
+#line 2890 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2095,7 +2910,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2096: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2913: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2124,12 +2939,12 @@ done
 for ac_func in sbrk
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2125: checking for $ac_func" >&5
+echo "configure:2942: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2130 "configure"
+#line 2947 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2152,7 +2967,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2153: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2970: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2181,12 +2996,12 @@ done
 # enough, but on some of those systems, the assert macro relies on requoting
 # working properly!
 echo $ac_n "checking for working assert macro""... $ac_c" 1>&6
-echo "configure:2182: checking for working assert macro" >&5
+echo "configure:2999: checking for working assert macro" >&5
 if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2187 "configure"
+#line 3004 "configure"
 #include "confdefs.h"
 #include <assert.h>
 #include <stdio.h>
@@ -2202,7 +3017,7 @@ assert (a == b
 
 ; return 0; }
 EOF
-if { (eval echo configure:2203: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3020: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   gas_cv_assert_ok=yes
 else
@@ -2243,12 +3058,12 @@ gas_test_headers="
 "
 
 echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6
-echo "configure:2244: checking whether declaration is required for strstr" >&5
+echo "configure:3061: checking whether declaration is required for strstr" >&5
 if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2249 "configure"
+#line 3066 "configure"
 #include "confdefs.h"
 $gas_test_headers
 int main() {
@@ -2259,7 +3074,7 @@ x = (f) strstr;
 
 ; return 0; }
 EOF
-if { (eval echo configure:2260: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3077: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   gas_cv_decl_needed_strstr=no
 else
@@ -2280,12 +3095,12 @@ EOF
 
 
 echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6
-echo "configure:2281: checking whether declaration is required for malloc" >&5
+echo "configure:3098: checking whether declaration is required for malloc" >&5
 if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2286 "configure"
+#line 3103 "configure"
 #include "confdefs.h"
 $gas_test_headers
 int main() {
@@ -2296,7 +3111,7 @@ x = (f) malloc;
 
 ; return 0; }
 EOF
-if { (eval echo configure:2297: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3114: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   gas_cv_decl_needed_malloc=no
 else
@@ -2317,12 +3132,12 @@ EOF
 
 
 echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6
-echo "configure:2318: checking whether declaration is required for free" >&5
+echo "configure:3135: checking whether declaration is required for free" >&5
 if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2323 "configure"
+#line 3140 "configure"
 #include "confdefs.h"
 $gas_test_headers
 int main() {
@@ -2333,7 +3148,7 @@ x = (f) free;
 
 ; return 0; }
 EOF
-if { (eval echo configure:2334: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3151: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   gas_cv_decl_needed_free=no
 else
@@ -2354,12 +3169,12 @@ EOF
 
 
 echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6
-echo "configure:2355: checking whether declaration is required for sbrk" >&5
+echo "configure:3172: checking whether declaration is required for sbrk" >&5
 if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2360 "configure"
+#line 3177 "configure"
 #include "confdefs.h"
 $gas_test_headers
 int main() {
@@ -2370,7 +3185,7 @@ x = (f) sbrk;
 
 ; return 0; }
 EOF
-if { (eval echo configure:2371: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3188: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   gas_cv_decl_needed_sbrk=no
 else
@@ -2394,12 +3209,12 @@ EOF
 # for it?
 
 echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6
-echo "configure:2395: checking whether declaration is required for errno" >&5
+echo "configure:3212: checking whether declaration is required for errno" >&5
 if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2400 "configure"
+#line 3217 "configure"
 #include "confdefs.h"
 
 #ifdef HAVE_ERRNO_H
@@ -2414,7 +3229,7 @@ x = (f) errno;
 
 ; return 0; }
 EOF
-if { (eval echo configure:2415: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3232: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   gas_cv_decl_needed_errno=no
 else
@@ -2434,58 +3249,6 @@ EOF
 }
 
 
-HLDFLAGS=
-HLDENV=
-RPATH_ENVVAR=LD_LIBRARY_PATH
-# If we have shared libraries, try to set rpath reasonably.
-if test "${shared}" = "true"; then
-  case "${host}" in
-  *-*-hpux*)
-    HLDFLAGS='-Wl,+s,+b,$(libdir)'
-    RPATH_ENVVAR=SHLIB_PATH
-    ;;
-  *-*-irix5* | *-*-irix6*)
-    HLDFLAGS='-Wl,-rpath,$(libdir)'
-    ;;
-  *-*-linux*aout*)
-    ;;
-  *-*-linux*)
-    HLDFLAGS='-Wl,-rpath,$(libdir)'
-    ;;
-  *-*-solaris*)
-    HLDFLAGS='-R $(libdir)'
-    ;;
-  *-*-sysv4*)
-    HLDENV='if test -z "$${LD_RUN_PATH}"; then LD_RUN_PATH=$(libdir); else LD_RUN_PATH=$${LD_RUN_PATH}:$(libdir); fi; export LD_RUN_PATH;'
-    ;;
-  esac
-fi
-
-# On SunOS, if the linker supports the -rpath option, use it to
-# prevent ../bfd and ../opcodes from being included in the run time
-# search path.
-case "${host}" in
-  *-*-sunos*)
-    echo 'main () { }' > conftest.c
-    ${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
-    if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
-      :
-    elif grep 'No such file' conftest.t >/dev/null 2>&1; then
-      :
-    elif grep 'do not mix' conftest.t >/dev/null 2>&1; then
-      :
-    elif test "${shared}" = "true"; then
-      HLDFLAGS='-Wl,-rpath=$(libdir)'
-    else
-      HLDFLAGS='-Wl,-rpath='
-    fi
-    rm -f conftest.t conftest.c conftest
-    ;;
-esac
-
-
-
-
 
 
 trap '' 1 2 15
@@ -2511,7 +3274,7 @@ EOF
 # Ultrix sh set writes to stderr and can't be redirected directly,
 # and sets the high bit in the cache file unless we assign to the vars.
 (set) 2>&1 |
-  case `(ac_space=' '; set) 2>&1` in
+  case `(ac_space=' '; set) 2>&1 | grep ac_space` in
   *ac_space=\ *)
     # `set' does not quote correctly, so add quotes (double-quote substitution
     # turns \\\\ into \\, and sed turns \\ into \).
@@ -2578,7 +3341,7 @@ do
     echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
     exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
   -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.12"
+    echo "$CONFIG_STATUS generated by autoconf version 2.12.1"
     exit 0 ;;
   -help | --help | --hel | --he | --h)
     echo "\$ac_cs_usage"; exit 0 ;;
@@ -2589,7 +3352,7 @@ done
 ac_given_srcdir=$srcdir
 ac_given_INSTALL="$INSTALL"
 
-trap 'rm -fr `echo "Makefile doc/Makefile .gdbinit:gdbinit.in conf" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile doc/Makefile .gdbinit:gdbinit.in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
 EOF
 cat >> $CONFIG_STATUS <<EOF
 
@@ -2598,6 +3361,7 @@ sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
  s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
 $ac_vpsub
 $extrasub
+s%@SHELL@%$SHELL%g
 s%@CFLAGS@%$CFLAGS%g
 s%@CPPFLAGS@%$CPPFLAGS%g
 s%@CXXFLAGS@%$CXXFLAGS%g
@@ -2634,26 +3398,39 @@ s%@build_alias@%$build_alias%g
 s%@build_cpu@%$build_cpu%g
 s%@build_vendor@%$build_vendor%g
 s%@build_os@%$build_os%g
-/@target_frag@/r $target_frag
-s%@target_frag@%%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+s%@PACKAGE@%$PACKAGE%g
+s%@VERSION@%$VERSION%g
+s%@ACLOCAL@%$ACLOCAL%g
+s%@AUTOCONF@%$AUTOCONF%g
+s%@AUTOMAKE@%$AUTOMAKE%g
+s%@AUTOHEADER@%$AUTOHEADER%g
+s%@MAKEINFO@%$MAKEINFO%g
+s%@SET_MAKE@%$SET_MAKE%g
+s%@RANLIB@%$RANLIB%g
+s%@CC@%$CC%g
+s%@LD@%$LD%g
+s%@NM@%$NM%g
+s%@LN_S@%$LN_S%g
+s%@LIBTOOL@%$LIBTOOL%g
 s%@extra_objects@%$extra_objects%g
 s%@target_cpu_type@%$target_cpu_type%g
 s%@obj_format@%$obj_format%g
 s%@te_file@%$te_file%g
 s%@atof@%$atof%g
-s%@BFDDEP@%$BFDDEP%g
 s%@BFDLIB@%$BFDLIB%g
-s%@OPCODES_DEP@%$OPCODES_DEP%g
 s%@OPCODES_LIB@%$OPCODES_LIB%g
 s%@ALL_OBJ_DEPS@%$ALL_OBJ_DEPS%g
-s%@CC@%$CC%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@YACC@%$YACC%g
+s%@LEX@%$LEX%g
+s%@LEXLIB@%$LEXLIB%g
 s%@CPP@%$CPP%g
+s%@LEX_OUTPUT_ROOT@%$LEX_OUTPUT_ROOT%g
+s%@MAINT@%$MAINT%g
+s%@EXEEXT@%$EXEEXT%g
 s%@ALLOCA@%$ALLOCA%g
-s%@HLDFLAGS@%$HLDFLAGS%g
-s%@HLDENV@%$HLDENV%g
-s%@RPATH_ENVVAR@%$RPATH_ENVVAR%g
 
 CEOF
 EOF
@@ -2776,7 +3553,7 @@ ac_eD='%g'
 if test "${CONFIG_HEADERS+set}" != set; then
 EOF
 cat >> $CONFIG_STATUS <<EOF
-  CONFIG_HEADERS="conf"
+  CONFIG_HEADERS="config.h:config.in"
 EOF
 cat >> $CONFIG_STATUS <<\EOF
 fi
@@ -2863,11 +3640,13 @@ fi; done
 
 EOF
 cat >> $CONFIG_STATUS <<EOF
+
 target_cpu_type=${target_cpu_type}
  obj_format=${obj_format}
  te_file=${te_file}
 EOF
 cat >> $CONFIG_STATUS <<\EOF
+test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
 rm -f targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c itbl-cpu.h
  echo '#include "tc-'"${target_cpu_type}"'.h"' > targ-cpu.h
  echo '#include "obj-'"${obj_format}"'.h"' > obj-format.h