Deal with double whitespace.

4 files changed, 16 insertions, 10 deletions

diff --git a/sbin/camcontrol/camcontrol.8 b/sbin/camcontrol/camcontrol.8
index 04eac548..453999e 100644
--- a/sbin/camcontrol/camcontrol.8
+++ b/sbin/camcontrol/camcontrol.8
@@ -402,7 +402,7 @@ the command type.
 The command and data specification syntax is documented
 in
 .Xr cam_cdbparse 3 .
-NOTE:  If the CDB specified causes data to be transfered to or from the
+NOTE: If the CDB specified causes data to be transfered to or from the
 SCSI device in question, you MUST specify either
 .Fl i
 or
@@ -429,7 +429,7 @@ bytes of data will be read from standard input and written to the device.
 Turn on CAM debugging printfs in the kernel.
 This requires options CAMDEBUG
 in your kernel config file.
-WARNING:  enabling debugging printfs currently
+WARNING: enabling debugging printfs currently
 causes an EXTREME number of kernel printfs.
 You may have difficulty
 turning off the debugging printfs once they start, since the kernel will be
diff --git a/sbin/ccdconfig/ccdconfig.8 b/sbin/ccdconfig/ccdconfig.8
index ca79dc8..e4ff4b3 100644
--- a/sbin/ccdconfig/ccdconfig.8
+++ b/sbin/ccdconfig/ccdconfig.8
@@ -194,7 +194,7 @@ reinitialize the label before [re]constructing your ccd disk.
 .Sh RECOVERY
 An error on a ccd disk is usually unrecoverable unless you are using the
 mirroring option.
-But mirroring has its own perils:  It assumes that
+But mirroring has its own perils: It assumes that
 both copies of the data at any given sector are the same.
 This holds true
 until a write error occurs or until you replace either side of the mirror.
diff --git a/sbin/fsck/fsck.8 b/sbin/fsck/fsck.8
index 734c83c..763e6a1 100644
--- a/sbin/fsck/fsck.8
+++ b/sbin/fsck/fsck.8
@@ -100,7 +100,7 @@ In preen mode, after pass 1 completes, all remaining file systems are checked,
 in pass number order running one process per disk drive in parallel for each
 pass number in increasing order.
 .Pp
-In other words:  In preen mode all pass 1 partitions are checked sequentially.
+In other words: In preen mode all pass 1 partitions are checked sequentially.
 Next all pass 2 partitions are checked in parallel, one process per disk drive.
 Next all pass 3 partitions are checked in parallel, one process per disk drive.
 etc.
diff --git a/sbin/vinum/vinum.8 b/sbin/vinum/vinum.8
index 157b020..f71ac23 100644
--- a/sbin/vinum/vinum.8
+++ b/sbin/vinum/vinum.8
@@ -430,7 +430,8 @@ subdisk: in other words, the offset is the numerical position of the subdisk
 multiplied by the stripe size.
 For example, in a plex with stripe size 271k,
 the first subdisk will have offset 0, the second offset 271k, the third 542k,
-etc.\&  This calculation ignores parity blocks in RAID-5 plexes.
+etc.
+This calculation ignores parity blocks in RAID-5 plexes.
 .El
 .Pp
 .It Xo
@@ -1154,9 +1155,11 @@ to the plex name.
 .\".It Xo
 .\".Ic replace
 .\".Ar drive newdrive
-.\"Move all the subdisks from the specified drive onto the new drive.  This will
+.\"Move all the subdisks from the specified drive onto the new drive.
+.\"This will
 .\"attempt to recover those subdisks that can be recovered, and create the others
-.\"from scratch.  If the new drive lacks the space for this operation, as many
+.\"from scratch.
+.\"If the new drive lacks the space for this operation, as many
 .\"subdisks as possible will be fitted onto the drive, and the rest will be left on
 .\"the original drive.
 .Pp
@@ -1272,13 +1275,16 @@ the configuration.
 .\".Ic set
 .\"sets the state of the specified object to one of the valid states (see
 .\".Sx OBJECT STATES
-.\"below).  Normally
+.\"below).
+.\"Normally
 .\".Nm
-.\"performs a large amount of consistency checking before making the change.  The
+.\"performs a large amount of consistency checking before making the change.
+.\"The
 .\".Fl f
 .\"option tells
 .\".Nm
-.\"to omit this checking and perform the change anyway.  Use this option with great
+.\"to omit this checking and perform the change anyway.
+.\"Use this option with great
 .\"care: it can result in total loss of data on a volume.
 .Pp
 .It Ic setdaemon Op Ar value