The .Nm utility

63 files changed, 366 insertions, 245 deletions

diff --git a/sbin/adjkerntz/adjkerntz.8 b/sbin/adjkerntz/adjkerntz.8
index 15f2627..eec148d 100644
--- a/sbin/adjkerntz/adjkerntz.8
+++ b/sbin/adjkerntz/adjkerntz.8
@@ -36,12 +36,14 @@
 .Nm
 .Fl a Op Fl s
 .Sh DESCRIPTION
-.Nm Adjkerntz
-maintains the proper relationship between the kernel clock, which
+The
+.Nm
+utility maintains the proper relationship between the kernel clock, which
 is always set to UTC, and the CMOS clock, which may be set to local
 time.
-.Nm Adjkerntz
-also informs the kernel about machine timezone shifts to
+The
+.Nm
+utility also informs the kernel about machine timezone shifts to
 maintain proper timestamps for local time filesystems such as the MS-DOS
 filesystem.
 The main purpose of this thing is not general fixing of
@@ -56,8 +58,9 @@ If the file
 exists, it means that CMOS clock keeps local time (MS-DOS and MS-Windows
 compatible mode).
 If that file does not exist, it means that the CMOS clock keeps UTC time.
-.Nm Adjkerntz
-passes this state to the
+The
+.Nm
+utility passes this state to the
 .Pa machdep.wall_cmos_clock
 kernel variable.
 .Pp
@@ -69,18 +72,21 @@ is invoked in two ways:
 .Bl -tag -width 4n
 .It Fl i
 This form handles system startups and shutdowns.
-.Nm Adjkerntz
-is invoked with this option from
+The
+.Nm
+utility is invoked with this option from
 .Pa /etc/rc
 on entry to multi-user mode, before any other daemons have been started.
-.Nm Adjkerntz
-puts itself into the background.
+The
+.Nm
+utility puts itself into the background.
 Then, for a local time CMOS clock,
 .Nm
 reads the local time from it
 and sets the kernel clock to the corresponding UTC time.
-.Nm Adjkerntz
-also stores the local time zone offset into the
+The
+.Nm
+utility also stores the local time zone offset into the
 .Pa machdep.adjkerntz
 kernel variable, for use by subsequent invocations of
 .Em "'adjkerntz -a'"
@@ -106,8 +112,9 @@ This form is used to update the local time CMOS clock and kernel
 .Pa machdep.adjkerntz
 variable when time zone changes occur,
 e.g., when entering or leaving daylight savings time.
-.Nm Adjkerntz
-uses the kernel clock's UTC time,
+The
+.Nm
+utility uses the kernel clock's UTC time,
 the previously stored
 time zone offset, and the changed time zone rule to
 calculate a new time zone offset.
@@ -136,8 +143,9 @@ command line, or multiple
 instances could conflict with each other.
 .El
 .Pp
-.Nm Adjkerntz
-clears the kernel timezone structure and makes the kernel clock run
+The
+.Nm
+utility clears the kernel timezone structure and makes the kernel clock run
 in the UTC time zone.
 Super-user privileges are required for all operations.
 .Sh ENVIRONMENT
@@ -183,5 +191,5 @@ and exits with a nonzero return code.
 .Sh HISTORY
 The
 .Nm
-command appeared in
+utility appeared in
 .Fx 1.0 .
diff --git a/sbin/atacontrol/atacontrol.8 b/sbin/atacontrol/atacontrol.8
index 4803cf6..48415ab 100644
--- a/sbin/atacontrol/atacontrol.8
+++ b/sbin/atacontrol/atacontrol.8
@@ -73,13 +73,16 @@
 .Nm
 .Ic list
 .Sh DESCRIPTION
+The
 .Nm
-is a control program that provides the user access and control to the
+utility is a control program that provides the user access and control to the
 .Fx
 .Xr ata 4
 subsystem.
 .Pp
+The
 .Nm
+utility
 can cause severe system crashes and loss of data if used improperly.  Please
 exercise caution when using this command!
 .Pp
diff --git a/sbin/atm/fore_dnld/fore_dnld.8 b/sbin/atm/fore_dnld/fore_dnld.8
index 134537e..4b548e9 100644
--- a/sbin/atm/fore_dnld/fore_dnld.8
+++ b/sbin/atm/fore_dnld/fore_dnld.8
@@ -37,8 +37,9 @@
 .Op Fl d Ar path
 .Op Fl f Ar objfile
 .Sh DESCRIPTION
+The
 .Nm
-downloads FORE Systems' microcode into the host ATM adapter(s).
+utility downloads FORE Systems' microcode into the host ATM adapter(s).
 .Sh OPTIONS
 .Bl -tag -width indent
 .It Fl i Ar intf
diff --git a/sbin/atm/ilmid/ilmid.8 b/sbin/atm/ilmid/ilmid.8
index fd09b99..a3b5265 100644
--- a/sbin/atm/ilmid/ilmid.8
+++ b/sbin/atm/ilmid/ilmid.8
@@ -37,8 +37,9 @@
 .Op Fl f
 .Op Fl r
 .Sh DESCRIPTION
+The
 .Nm
-is a HARP ATM daemon that performs the ILMI ATM address registration
+utility is a HARP ATM daemon that performs the ILMI ATM address registration
 procedures with an ATM network switch.
 It is normally invoked at boot time
 from the ATM startup script.
@@ -80,8 +81,9 @@ that the ATM Address table is empty.
 It also does not implement any
 of the ATM Forum MIB that is specified as part of ILMI.
 .Pp
+The
 .Nm
-will increment the debug level when it receives a
+utility will increment the debug level when it receives a
 .Dv SIGUSR1
 signal and will
 decrement the debug level when it receives a
diff --git a/sbin/badsect/badsect.8 b/sbin/badsect/badsect.8
index e5d4e9e..89abe88 100644
--- a/sbin/badsect/badsect.8
+++ b/sbin/badsect/badsect.8
@@ -42,8 +42,9 @@
 .Nm
 .Ar bbdir sector ...
 .Sh DESCRIPTION
-.Nm Badsect
-makes a file to contain a bad sector.  Normally, bad sectors
+The
+.Nm
+utility makes a file to contain a bad sector.  Normally, bad sectors
 are made inaccessible by the standard formatter, which provides
 a forwarding table for bad sectors to the driver.
 If a driver supports the bad blocking standard it is much preferable to
@@ -67,8 +68,9 @@ do not support the bad-blocking standard
 .Nm
 may be used to good effect.
 .Pp
-.Nm Badsect
-is used on a quiet filesystem in the following way:
+The
+.Nm
+utility is used on a quiet filesystem in the following way:
 First mount the filesystem, and change to its root directory.
 Make a directory
 .Li BAD
@@ -97,8 +99,9 @@ This will leave the bad sectors in only the
 .Li BAD
 files.
 .Pp
-.Nm Badsect
-works by giving the specified sector numbers in a
+The
+.Nm
+utility works by giving the specified sector numbers in a
 .Xr mknod 2
 system call,
 creating an illegal file whose first block address is the block containing
@@ -113,8 +116,9 @@ to convert the inode to a regular file containing the bad block.
 .Sh SEE ALSO
 .Xr fsck 8
 .Sh DIAGNOSTICS
-.Nm Badsect
-refuses to attach a block that
+The
+.Nm
+utility refuses to attach a block that
 resides in a critical area or is out of range of the filesystem.
 A warning is issued if the block is already in use.
 .Sh BUGS
@@ -126,5 +130,5 @@ filesystem fragment.
 .Sh HISTORY
 The
 .Nm
-command appeared in
+utility appeared in
 .Bx 4.1 .
diff --git a/sbin/bsdlabel/bsdlabel.8 b/sbin/bsdlabel/bsdlabel.8
index 4c674b5..faae777 100644
--- a/sbin/bsdlabel/bsdlabel.8
+++ b/sbin/bsdlabel/bsdlabel.8
@@ -94,7 +94,9 @@
 .Ar disk Ar protofile
 .Oo Ar disktype/auto Oc
 .Sh DESCRIPTION
-.Nm Disklabel
+The
+.Nm
+utility
 installs, examines or modifies the label on a disk drive or pack.  When writing
 the label, it can be used to change the drive identification, the disk
 partitions on the drive, or to replace a damaged label.  There are several forms
@@ -137,8 +139,9 @@ partition be specified.  For example
 You do not have to include the
 .Pa /dev/
 path prefix when specifying the device.
+The
 .Nm
-will automatically prepend it.
+utility will automatically prepend it.
 .Ss Reading the disk label
 .Pp
 To examine the label on a disk drive, use
@@ -510,7 +513,9 @@ auto
 .It Pa /boot/boot<n>
 .El
 .Sh SAVED FILE FORMAT
+The
 .Nm
+utility
 uses an ASCII version of the label when examining, editing or restoring a disk
 label.  The format is:
 .Bd -literal -offset 4n
@@ -643,7 +648,9 @@ represents the entire slice and should be of type
 though
 .Nm
 does not enforce this convention.
+The
 .Nm
+utility
 also knows about a number of other partition types, none of which are in current
 use.
 See the definitions starting with
@@ -870,8 +877,9 @@ For the i386 architecture, the primary bootstrap sector contains
 an embedded
 .Em fdisk
 table.
-.Nm Disklabel
-takes care to not clobber it when installing a bootstrap only
+The
+.Nm
+utility takes care to not clobber it when installing a bootstrap only
 .Pq Fl B ,
 or when editing an existing label
 .Pq Fl e ,
@@ -888,7 +896,9 @@ concern if the disk is fully dedicated, so that the
 disklabel
 starts at absolute block 0 on the disk.
 .Pp
+The
 .Nm
+utility
 does not perform all possible error checking.  Warning *is* given if partitions
 overlap; if an absolute offset does not match the expected offset; if the
 .Dq c
diff --git a/sbin/camcontrol/camcontrol.8 b/sbin/camcontrol/camcontrol.8
index 060c1b7..5d1c9b1 100644
--- a/sbin/camcontrol/camcontrol.8
+++ b/sbin/camcontrol/camcontrol.8
@@ -137,18 +137,22 @@
 .Nm
 .Ic help
 .Sh DESCRIPTION
+The
 .Nm
-is a utility designed to provide a way for users to access and control the
+utility is designed to provide a way for users to access and control the
 .Fx
 CAM subsystem.
 .Pp
+The
 .Nm
+utility
 can cause a loss of data and/or system crashes if used improperly.  Even
 expert users are encouraged to exercise caution when using this command.
 Novice users should stay away from this utility.
 .Pp
+The
 .Nm
-has a number of primary functions, many of which support an optional
+utility has a number of primary functions, many of which support an optional
 device identifier.  A device identifier can take one of three forms:
 .Bl -tag -width 14n
 .It deviceUNIT
@@ -222,8 +226,9 @@ List all peripheral drivers attached to a given physical device (logical
 unit).
 .It Ic tur
 Send the SCSI test unit ready (0x00) command to the given device.
+The
 .Nm
-will report whether the device is ready or not.
+utility will report whether the device is ready or not.
 .It Ic inquiry
 Send a SCSI inquiry command (0x12) to a device.  By default,
 .Nm
@@ -283,7 +288,9 @@ required.  Most drives support the physical sector format.  Some drives
 support the logical block format.  Many drives, if they don't support the
 requested format, return the data in an alternate format, along with sense
 information indicating that the requested data format isn't supported.
+The
 .Nm
+utility
 attempts to detect this, and print out whatever format the drive returns.
 If the drive uses a non-standard sense code to report that it doesn't
 support the requested format,
@@ -480,7 +487,9 @@ Show or negotiate various communication parameters.  Some controllers may
 not support setting or changing some of these values.  For instance, the
 Adaptec 174x controllers do not support changing a device's sync rate or
 offset.
+The
 .Nm
+utility
 will not attempt to set the parameter if the controller indicates that it
 does not support setting the parameter.  To find out what the controller
 supports, use the
@@ -632,8 +641,9 @@ fails.
 .Dl camcontrol tur da0
 .Pp
 Send the SCSI test unit ready command to da0.
+The
 .Nm
-will report whether the disk is ready, but will not display sense
+utility will report whether the disk is ready, but will not display sense
 information if the command fails since the
 .Fl v
 switch was not specified.
@@ -648,8 +658,9 @@ printing (with the
 .Fl v
 flag) if the command fails.  Since error recovery is turned on, the
 disk will be spun up if it is not currently spinning.
+The
 .Nm
-will report whether the disk is ready.
+utility will report whether the disk is ready.
 .Bd -literal -offset indent
 camcontrol cmd -n cd -u 1 -v -c "3C 00 00 00 00 00 00 00 0e 00" \e
 	-i 0xe "s1 i3 i1 i1 i1 i1 i1 i1 i1 i1 i1 i1"
@@ -716,7 +727,7 @@ Test Unit Ready command to make the settings take effect.
 .Sh HISTORY
 The
 .Nm
-command first appeared in
+utility first appeared in
 .Fx 3.0 .
 .Pp
 The mode page editing code and arbitrary SCSI command code are based upon
diff --git a/sbin/ccdconfig/ccdconfig.8 b/sbin/ccdconfig/ccdconfig.8
index c2f76c3..fc662f9 100644
--- a/sbin/ccdconfig/ccdconfig.8
+++ b/sbin/ccdconfig/ccdconfig.8
@@ -63,8 +63,9 @@
 .Fl g
 .Op Ar ccd Op Ar ...
 .Sh DESCRIPTION
-.Nm Ccdconfig
-is used to dynamically configure and unconfigure concatenated disk
+The
+.Nm
+utility is used to dynamically configure and unconfigure concatenated disk
 devices, or ccds.  For more information about the ccd, see
 .Xr ccd 4 .
 .Pp
@@ -130,8 +131,12 @@ The component devices need to name partitions of type
 as shown by
 .Xr disklabel 8 ) .
 .Sh EXAMPLES
-A number of ccdconfig examples are shown below.  The arguments passed
-to ccdconfig are exactly the same as you might place in the
+A number of
+.Nm
+examples are shown below.  The arguments passed
+to
+.Nm
+are exactly the same as you might place in the
 .Pa /etc/ccd.conf
 configuration file.  The first example creates a 4-disk stripe out of
 four scsi disk partitions.  The stripe uses a 64 sector interleave.
@@ -178,8 +183,7 @@ An error on a ccd disk is usually unrecoverable unless you are using the
 mirroring option.  But mirroring has its own perils:  It assumes that
 both copies of the data at any given sector are the same.  This holds true
 until a write error occurs or until you replace either side of the mirror.
-.Nm Ccd
-uses a poor-man's mirroring implementation.  It works well enough that if
+This is a poor-man's mirroring implementation.  It works well enough that if
 you begin to get disk errors you should be able to backup the ccd disk,
 replace the broken hardware, and then regenerate the ccd disk.  If you need
 more than this you should look into external hardware RAID SCSI boxes,
@@ -199,5 +203,5 @@ default ccd configuration file
 .Sh HISTORY
 The
 .Nm
-command first appeared in
+utility first appeared in
 .Nx 1.0a .
diff --git a/sbin/clri/clri.8 b/sbin/clri/clri.8
index beb005a..41c137f 100644
--- a/sbin/clri/clri.8
+++ b/sbin/clri/clri.8
@@ -43,13 +43,15 @@
 .Ar special_device inode_number ...
 .Sh DESCRIPTION
 .Bf -symbolic
-.Nm Clri
-is obsoleted for normal filesystem repair work by
+The
+.Nm
+utility is obsoleted for normal filesystem repair work by
 .Xr fsck 8 .
 .Ef
 .Pp
-.Nm Clri
-zeros out the inodes with the specified inode number(s)
+The
+.Nm
+utility zeros out the inodes with the specified inode number(s)
 on the filesystem residing on the given
 .Ar special_device .
 The
diff --git a/sbin/comcontrol/comcontrol.8 b/sbin/comcontrol/comcontrol.8
index eee6542..2d34eb1 100644
--- a/sbin/comcontrol/comcontrol.8
+++ b/sbin/comcontrol/comcontrol.8
@@ -11,8 +11,9 @@
 .Op dtrwait Ar number
 .Op drainwait Ar number
 .Sh DESCRIPTION
-.Nm Comcontrol
-is used to examine and modify some of the special characteristics
+The
+.Nm
+utility is used to examine and modify some of the special characteristics
 of the specified tty device.
 If no arguments other than the device (or "-" for stdin)
 are specified,
diff --git a/sbin/conscontrol/conscontrol.8 b/sbin/conscontrol/conscontrol.8
index c9e36bb..6a8010d 100644
--- a/sbin/conscontrol/conscontrol.8
+++ b/sbin/conscontrol/conscontrol.8
@@ -91,7 +91,7 @@ All console output is suppressed when console muting is
 .Sh HISTORY
 The
 .Nm
-command first appeared in
+utility first appeared in
 .Fx 5.0 .
 .Sh AUTHORS
 .An Jonathan Lemon
diff --git a/sbin/disklabel/disklabel.8 b/sbin/disklabel/disklabel.8
index 4c674b5..faae777 100644
--- a/sbin/disklabel/disklabel.8
+++ b/sbin/disklabel/disklabel.8
@@ -94,7 +94,9 @@
 .Ar disk Ar protofile
 .Oo Ar disktype/auto Oc
 .Sh DESCRIPTION
-.Nm Disklabel
+The
+.Nm
+utility
 installs, examines or modifies the label on a disk drive or pack.  When writing
 the label, it can be used to change the drive identification, the disk
 partitions on the drive, or to replace a damaged label.  There are several forms
@@ -137,8 +139,9 @@ partition be specified.  For example
 You do not have to include the
 .Pa /dev/
 path prefix when specifying the device.
+The
 .Nm
-will automatically prepend it.
+utility will automatically prepend it.
 .Ss Reading the disk label
 .Pp
 To examine the label on a disk drive, use
@@ -510,7 +513,9 @@ auto
 .It Pa /boot/boot<n>
 .El
 .Sh SAVED FILE FORMAT
+The
 .Nm
+utility
 uses an ASCII version of the label when examining, editing or restoring a disk
 label.  The format is:
 .Bd -literal -offset 4n
@@ -643,7 +648,9 @@ represents the entire slice and should be of type
 though
 .Nm
 does not enforce this convention.
+The
 .Nm
+utility
 also knows about a number of other partition types, none of which are in current
 use.
 See the definitions starting with
@@ -870,8 +877,9 @@ For the i386 architecture, the primary bootstrap sector contains
 an embedded
 .Em fdisk
 table.
-.Nm Disklabel
-takes care to not clobber it when installing a bootstrap only
+The
+.Nm
+utility takes care to not clobber it when installing a bootstrap only
 .Pq Fl B ,
 or when editing an existing label
 .Pq Fl e ,
@@ -888,7 +896,9 @@ concern if the disk is fully dedicated, so that the
 disklabel
 starts at absolute block 0 on the disk.
 .Pp
+The
 .Nm
+utility
 does not perform all possible error checking.  Warning *is* given if partitions
 overlap; if an absolute offset does not match the expected offset; if the
 .Dq c
diff --git a/sbin/dmesg/dmesg.8 b/sbin/dmesg/dmesg.8
index 5551bad..07c3a4b 100644
--- a/sbin/dmesg/dmesg.8
+++ b/sbin/dmesg/dmesg.8
@@ -44,8 +44,9 @@
 .Op Fl M Ar core
 .Op Fl N Ar system
 .Sh DESCRIPTION
-.Nm Dmesg
-displays the contents of the system message buffer.
+The
+.Nm
+utility displays the contents of the system message buffer.
 If neither the
 .Fl N
 nor the
@@ -86,5 +87,5 @@ at startup time
 .Sh HISTORY
 The
 .Nm
-command appeared in
+utility appeared in
 .Bx 4.0 .
diff --git a/sbin/dump/dump.8 b/sbin/dump/dump.8
index 539ed12..f51abca 100644
--- a/sbin/dump/dump.8
+++ b/sbin/dump/dump.8
@@ -65,8 +65,9 @@ is an alternate name for
 option syntax is implemented for backward compatibility, but
 is not documented here.)
 .Sh DESCRIPTION
-.Nm Dump
-examines files
+The
+.Nm
+utility examines files
 on a filesystem
 and determines which files
 need to be backed up.
@@ -257,8 +258,7 @@ but the
 .Fl D
 option may be used to change it.
 .It Fl W
-.Nm Dump
-tells the operator what filesystems need to be dumped.
+Tell the operator what filesystems need to be dumped.
 This information is gleaned from the files
 .Pa dumpdates
 and
@@ -291,8 +291,9 @@ subject to the
 .Fl h
 option.
 .Pp
-.Nm Dump
-requires operator intervention on these conditions:
+The
+.Nm
+utility requires operator intervention on these conditions:
 end of tape,
 end of dump,
 tape write error,
@@ -329,8 +330,9 @@ restart itself from the checkpoint
 after the old tape has been rewound and removed,
 and a new tape has been mounted.
 .Pp
-.Nm Dump
-tells the operator what is going on at periodic intervals
+The
+.Nm
+utility tells the operator what is going on at periodic intervals
 (every 5 minutes, or promptly after receiving
 .Dv SIGINFO ) ,
 including usually low estimates of the number of blocks to write,
@@ -422,8 +424,9 @@ impossible to use a larger output block size, so
 .Nm
 will prevent this from happening.
 .Pp
-.Nm Dump
-with the
+The
+.Nm
+utility with the
 .Fl W
 or
 .Fl w
@@ -443,8 +446,9 @@ and provided more assistance
 for the operator running
 .Xr restore .
 .Pp
-.Nm Dump
-cannot do remote backups without being run as root, due to its
+The
+.Nm
+utility cannot do remote backups without being run as root, due to its
 security history.  This will be fixed in a later version of
 .Fx .
 Presently, it works if you set it setuid (like it used to be), but this
@@ -452,5 +456,5 @@ might constitute a security risk.
 .Sh HISTORY
 A
 .Nm
-command appeared in
+utility appeared in
 .At v6 .
diff --git a/sbin/dumpfs/dumpfs.8 b/sbin/dumpfs/dumpfs.8
index 3ba37bc..3e26071 100644
--- a/sbin/dumpfs/dumpfs.8
+++ b/sbin/dumpfs/dumpfs.8
@@ -42,8 +42,9 @@
 .Nm
 .Op Ar filesys No \&| Ar device
 .Sh DESCRIPTION
-.Nm Dumpfs
-prints out the super block and cylinder group information
+The
+.Nm
+utility prints out the super block and cylinder group information
 for the filesystem or special device specified.
 The listing is very long and detailed.  This
 command is useful mostly for finding out certain filesystem
@@ -59,5 +60,5 @@ free space percentage.
 .Sh HISTORY
 The
 .Nm
-command appeared in
+utility appeared in
 .Bx 4.2 .
diff --git a/sbin/dumpon/dumpon.8 b/sbin/dumpon/dumpon.8
index 55a1ea0..53f435c 100644
--- a/sbin/dumpon/dumpon.8
+++ b/sbin/dumpon/dumpon.8
@@ -46,8 +46,9 @@
 .Op Fl v
 .Ar off
 .Sh DESCRIPTION
-.Nm Dumpon
-is used to specify a device where the kernel can save a crash dump in
+The
+.Nm
+utility is used to specify a device where the kernel can save a crash dump in
 the case of a panic.
 .Pp
 Calls to
@@ -81,7 +82,7 @@ should be used as the dump device.
 .Pp
 The
 .Nm
-program operates by setting the
+utility operates by setting the
 .Xr sysctl 3
 MIB variable
 .Dq kern.dumpdev
@@ -126,5 +127,5 @@ is taken, it is not possible to send crash dumps directly to a file.
 .Sh HISTORY
 The
 .Nm
-command appeared in
+utility appeared in
 .Fx 2.1 .
diff --git a/sbin/fdisk_pc98/fdisk.8 b/sbin/fdisk_pc98/fdisk.8
index f1a1856..3a525ee 100644
--- a/sbin/fdisk_pc98/fdisk.8
+++ b/sbin/fdisk_pc98/fdisk.8
@@ -37,14 +37,13 @@ you can have one or more partitions with one
 .Em active .
 The DOS
 .Nm
-program can be used to divide space on the disk into partitions and set one
+utility can be used to divide space on the disk into partitions and set one
 .Em active .
 .Sh DESCRIPTION
 The
 .Fx
-program
 .Nm
-serves a similar purpose to the DOS program.  The first form is used to
+utility serves a similar purpose to the DOS program.  The first form is used to
 display partition information or to interactively edit the partition
 table.  The second is used to write a partition table using a
 .Ar configfile
@@ -224,10 +223,11 @@ option is used.  If the
 .Fl f
 option is not used, the
 .Nm
-program will enter a conversational mode.
+utility will enter a conversational mode.
 This mode is designed not to change any data unless you explicitly tell it to.
-.Nm Fdisk
-selects defaults for its questions to guarantee the above behavior.
+The
+.Nm
+utility selects defaults for its questions to guarantee the above behavior.
 .Pp
 It displays each partition
 and ask if you want to edit it.
@@ -237,8 +237,9 @@ and asking for a new one.
 When you are done with a partition,
 .Nm
 will display it and ask if it is correct.
-.Nm Fdisk
-will then proceed to the next entry.
+The
+.Nm
+utility will then proceed to the next entry.
 .Pp
 Getting the
 .Em cyl , sector ,
diff --git a/sbin/fsck/fsck.8 b/sbin/fsck/fsck.8
index 57fbaf0..1d20f4f 100644
--- a/sbin/fsck/fsck.8
+++ b/sbin/fsck/fsck.8
@@ -45,7 +45,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-command invokes filesystem-specific programs to check
+utility invokes filesystem-specific programs to check
 the special devices listed in the
 .Xr fstab 5
 file or in the command line for consistency.
diff --git a/sbin/fsck_msdosfs/fsck_msdosfs.8 b/sbin/fsck_msdosfs/fsck_msdosfs.8
index 5d28f40..61f3146 100644
--- a/sbin/fsck_msdosfs/fsck_msdosfs.8
+++ b/sbin/fsck_msdosfs/fsck_msdosfs.8
@@ -115,10 +115,11 @@ as the answer to all operator questions.
 .Xr fsck_ffs 8 ,
 .Xr mount_msdos 8
 .Sh BUGS
+The
 .Nm
-is still under construction.
+utility is still under construction.
 .Sh HISTORY
 The
 .Nm
-command first appeared in
+utility first appeared in
 .Fx 4.4 .
diff --git a/sbin/fsdb/fsdb.8 b/sbin/fsdb/fsdb.8
index 4622a8b..27f118d 100644
--- a/sbin/fsdb/fsdb.8
+++ b/sbin/fsdb/fsdb.8
@@ -41,8 +41,9 @@
 .Op Fl r
 .Ar fsname
 .Sh DESCRIPTION
-.Nm Fsdb
-opens
+The
+.Nm
+utility opens
 .Ar fsname
 (usually a raw disk partition) and runs a command loop
 allowing manipulation of the filesystem's inode data.  You are prompted
@@ -226,8 +227,9 @@ There are a bunch of other things that you might want to do which
 .Nm
 doesn't implement.
 .Sh HISTORY
-.Nm Fsdb
-uses the source code for
+The
+.Nm
+utility uses the source code for
 .Xr fsck 8
 to implement most of the filesystem manipulation code.  The remainder of
 .Nm
diff --git a/sbin/fsirand/fsirand.8 b/sbin/fsirand/fsirand.8
index 4bef0b3..b644a79 100644
--- a/sbin/fsirand/fsirand.8
+++ b/sbin/fsirand/fsirand.8
@@ -45,7 +45,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-command installs random generation numbers on all the inodes for
+utility installs random generation numbers on all the inodes for
 each filesystem specified on the command line by
 .Ar special .
 This increases the security of NFS-exported filesystems by making
@@ -61,13 +61,15 @@ run
 by hand on a new filesystem.  It is only used to
 re-randomize or report on an existing filesystem.
 .Pp
-.Nm Fsirand
-should only be used on an unmounted filesystem that
+The
+.Nm
+utility should only be used on an unmounted filesystem that
 has been checked with
 .Xr fsck 8
 or a filesystem that is mounted read-only.
-.Nm Fsirand
-may be used on the root filesystem in single-user mode
+The
+.Nm
+utility may be used on the root filesystem in single-user mode
 but the system should be rebooted via ``reboot -n'' afterwards.
 .Sh OPTIONS
 .Bl -tag -width indent
@@ -98,7 +100,7 @@ of memory for large disks with few cylinder groups.
 .Sh HISTORY
 The
 .Nm
-command appeared in SunOS 3.x.
+utility appeared in SunOS 3.x.
 .Pp
 This version of
 .Nm
diff --git a/sbin/growfs/growfs.8 b/sbin/growfs/growfs.8
index 691f794..1b62943 100644
--- a/sbin/growfs/growfs.8
+++ b/sbin/growfs/growfs.8
@@ -49,8 +49,9 @@
 .Op Fl s Ar size
 .Ar special
 .Sh DESCRIPTION
+The
 .Nm
-extends the
+utility extends the
 .Xr newfs 8
 program.
 Before starting
@@ -59,8 +60,9 @@ the disk must be labeled to a bigger size using
 .Xr disklabel 8 .
 If you are using volumes you must enlarge them by using
 .Xr vinum 8 .
+The
 .Nm
-extends the size of the filesystem on the specified special file.
+utility extends the size of the filesystem on the specified special file.
 Currently
 .Nm
 can only enlarge unmounted filesystems.
@@ -110,8 +112,9 @@ will enlarge
 up to 2GB if there is enough space in
 .Pa /dev/vinum/testvol .
 .Sh BUGS
+The
 .Nm
-works starting with
+utility works starting with
 .Fx
 3.x.
 There may be cases on
@@ -182,5 +185,5 @@ mode.
 .Sh HISTORY
 The
 .Nm
-command first appeared in
+utility first appeared in
 .Fx 4.4 .
diff --git a/sbin/ifconfig/ifconfig.8 b/sbin/ifconfig/ifconfig.8
index 9fee24e..3c40e1c 100644
--- a/sbin/ifconfig/ifconfig.8
+++ b/sbin/ifconfig/ifconfig.8
@@ -72,12 +72,14 @@
 .Op Fl u
 .Op Fl C
 .Sh DESCRIPTION
-.Nm Ifconfig
-is used to assign an address
+The
+.Nm
+utility is used to assign an address
 to a network interface and/or configure
 network interface parameters.
-.Nm Ifconfig
-must be used at boot time to define the network address
+The
+.Nm
+utility must be used at boot time to define the network address
 of each interface present on a machine; it may also be used at
 a later time to redefine an interface's address
 or other operating parameters.
@@ -643,8 +645,9 @@ Included for
 compatibility.
 .El
 .Pp
-.Nm Ifconfig
-displays the current configuration for a network interface
+The
+.Nm
+utility displays the current configuration for a network interface
 when no optional parameters are supplied.
 If a protocol family is specified,
 .Nm
@@ -721,5 +724,5 @@ So, such manual deletions are strongly discouraged.
 .Sh HISTORY
 The
 .Nm
-command appeared in
+utility appeared in
 .Bx 4.2 .
diff --git a/sbin/init/init.8 b/sbin/init/init.8
index b12b3e2..1b31f11 100644
--- a/sbin/init/init.8
+++ b/sbin/init/init.8
@@ -51,7 +51,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-program
+utility
 is the last stage of the boot process.
 It normally runs the automatic reboot sequence as described in
 .Xr rc 8 ,
@@ -62,7 +62,7 @@ commences single-user operation by giving
 the super-user a shell on the console.
 The
 .Nm
-program may be passed parameters
+utility may be passed parameters
 from the boot program to
 prevent the system from going multi-user and to instead execute
 a single-user shell without starting the normal daemons.
@@ -159,8 +159,9 @@ In multi-user operation,
 maintains
 processes for the terminal ports found in the file
 .Xr ttys 5 .
-.Nm Init
-reads this file and executes the command found in the second field,
+The
+.Nm
+utility reads this file and executes the command found in the second field,
 unless the first field refers to a device in
 .Pa /dev
 which is not configured.
@@ -181,7 +182,7 @@ dies, either because the user logged out
 or an abnormal termination occurred (a signal),
 the
 .Nm
-program wakes up, deletes the user
+utility wakes up, deletes the user
 from the
 .Xr utmp 5
 file of current users and records the logout in the
@@ -194,8 +195,9 @@ executing a new
 .Nm getty
 for the line.
 .Pp
-.Nm Init
-can also be used to keep arbitrary daemons running,
+The
+.Nm
+utility can also be used to keep arbitrary daemons running,
 automatically restarting them if they die.
 In this case, the first field in the
 .Xr ttys 5
@@ -247,8 +249,9 @@ file and records in the
 file is out of sync,
 so this practice is not recommended.
 .Pp
-.Nm Init
-will terminate multi-user operations and resume single-user mode
+The
+.Nm
+utility will terminate multi-user operations and resume single-user mode
 if sent a terminate
 .Pq Dv TERM
 signal, for example,
@@ -259,8 +262,9 @@ hardware or software failure),
 will not wait for them all to die (which might take forever), but
 will time out after 30 seconds and print a warning message.
 .Pp
-.Nm Init
-will cease creating new processes
+The
+.Nm
+utility will cease creating new processes
 and allow the system to slowly die away, if it is sent a terminal stop
 .Pq Dv TSTP
 signal, i.e.\&
@@ -272,8 +276,9 @@ This hook is used by
 and
 .Xr halt 8 .
 .Pp
-.Nm Init
-will terminate all possible processes (again, it will not wait
+The
+.Nm
+utility will terminate all possible processes (again, it will not wait
 for deadlocked processes) and reboot the machine if sent the interrupt
 .Pq Dv INT
 signal, i.e.\&
@@ -281,8 +286,9 @@ signal, i.e.\&
 This is useful for shutting the machine down cleanly from inside the kernel
 or from X when the machine appears to be hung.
 .Pp
-.Nm Init
-will do the same, except it will halt the machine if sent
+The
+.Nm
+utility will do the same, except it will halt the machine if sent
 the user defined signal 1
 .Pq Dv USR1 ,
 or will halt and turn the power off (if hardware permits) if sent
@@ -382,7 +388,7 @@ system shutdown commands
 .Sh HISTORY
 An
 .Nm
-command appeared in
+utility appeared in
 .At v6 .
 .Sh CAVEATS
 Systems without
diff --git a/sbin/ip6fw/ip6fw.8 b/sbin/ip6fw/ip6fw.8
index 62bb455..b894311 100644
--- a/sbin/ip6fw/ip6fw.8
+++ b/sbin/ip6fw/ip6fw.8
@@ -564,6 +564,7 @@ API based upon code written by
 .An Daniel Boulet
 for BSDI.
 .Sh HISTORY
+A
 .Nm
-first appeared in
+utility first appeared in
 .Fx 4.0 .
diff --git a/sbin/ipfw/ipfw.8 b/sbin/ipfw/ipfw.8
index aaaf9dc..edfa62a 100644
--- a/sbin/ipfw/ipfw.8
+++ b/sbin/ipfw/ipfw.8
@@ -54,8 +54,9 @@
 .Brq Cm delete | list | show
 .Op Ar number ...
 .Sh DESCRIPTION
+The
 .Nm
-is the user interface for controlling the
+utility is the user interface for controlling the
 .Xr ipfirewall 4
 and the
 .Xr dummynet 4
diff --git a/sbin/kldconfig/kldconfig.8 b/sbin/kldconfig/kldconfig.8
index 03d77da..f8b9f79 100644
--- a/sbin/kldconfig/kldconfig.8
+++ b/sbin/kldconfig/kldconfig.8
@@ -39,7 +39,9 @@
 .Nm
 .Fl r
 .Sh DESCRIPTION
+The
 .Nm
+utility
 displays or modifies the search path used by the kernel when loading modules
 using the
 .Xr kldload 8
diff --git a/sbin/kldload/kldload.8 b/sbin/kldload/kldload.8
index 1a144a2..14e2a95 100644
--- a/sbin/kldload/kldload.8
+++ b/sbin/kldload/kldload.8
@@ -71,7 +71,7 @@ Modules may also be auto-loaded through their addition to
 .Sh HISTORY
 The
 .Nm
-command first appeared in
+utility first appeared in
 .Fx 3.0 ,
 replacing the
 .Xr lkm 4
diff --git a/sbin/kldstat/kldstat.8 b/sbin/kldstat/kldstat.8
index bb47b78..bbabb73 100644
--- a/sbin/kldstat/kldstat.8
+++ b/sbin/kldstat/kldstat.8
@@ -63,7 +63,7 @@ and with a nonzero status if an error occurs.
 .Sh HISTORY
 The
 .Nm
-command first appeared in
+utility first appeared in
 .Fx 3.0 ,
 replacing the
 .Xr lkm 4
diff --git a/sbin/kldunload/kldunload.8 b/sbin/kldunload/kldunload.8
index 2ad72fd..f749656 100644
--- a/sbin/kldunload/kldunload.8
+++ b/sbin/kldunload/kldunload.8
@@ -68,7 +68,7 @@ and with a nonzero status if an error occurs.
 .Sh HISTORY
 The
 .Nm
-command first appeared in
+utility first appeared in
 .Fx 3.0 ,
 replacing the
 .Xr lkm 4
diff --git a/sbin/ldconfig/ldconfig.8 b/sbin/ldconfig/ldconfig.8
index 6334aa3..b4d5bab 100644
--- a/sbin/ldconfig/ldconfig.8
+++ b/sbin/ldconfig/ldconfig.8
@@ -42,8 +42,9 @@
 .Op Fl f Ar hints_file
 .Op Ar directory | Ar
 .Sh DESCRIPTION
+The
 .Nm
-is used to prepare a set of
+utility is used to prepare a set of
 .Dq hints
 for use by the dynamic linker
 to facilitate quick lookup of shared libraries available in multiple
@@ -89,8 +90,9 @@ equivalent of the
 switch of
 .Xr ld 1 .
 .Pp
-.Nm Ldconfig
-is typically run as part of the boot sequence.
+The
+.Nm
+utility is typically run as part of the boot sequence.
 .Pp
 The following options are recognized by
 .Nm :
diff --git a/sbin/mdconfig/mdconfig.8 b/sbin/mdconfig/mdconfig.8
index a95a0fb..d0e1e79 100644
--- a/sbin/mdconfig/mdconfig.8
+++ b/sbin/mdconfig/mdconfig.8
@@ -67,7 +67,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-command configures and enables
+utility configures and enables
 .Xr md 4
 devices.
 .Pp
@@ -171,7 +171,7 @@ chmod 1777 /tmp
 .Sh HISTORY
 The
 .Nm
-first appeared in
+utility first appeared in
 .Fx 5.0
 as a cleaner replacement for the
 .Xr vn 4
@@ -181,6 +181,6 @@ combo.
 .Sh AUTHORS
 The
 .Nm
-program was written by
+utility was written by
 .An Poul-Henning Kamp
 .Aq phk@FreeBSD.org .
diff --git a/sbin/mdmfs/mdmfs.8 b/sbin/mdmfs/mdmfs.8
index bb233a4..eb97897 100644
--- a/sbin/mdmfs/mdmfs.8
+++ b/sbin/mdmfs/mdmfs.8
@@ -74,12 +74,13 @@ driver
 .Sh DESCRIPTION
 The
 .Nm
-program is designed to be a work-alike and look-alike of the deprecated
+utility is designed to be a work-alike and look-alike of the deprecated
 .Xr mount_mfs 8 .
 The end result is essentially the same,
 but is accomplished in a completely different way.
+The
 .Nm
-configures an
+utility configures an
 .Xr md 4
 disk using
 .Xr mdconfig 8 ,
@@ -289,8 +290,9 @@ do not use soft-updates on it and mount it
 .Pp
 .Dl "mdmfs -M -S -o async -s 16m md1 /tmp"
 .Sh COMPATIBILITY
-.Nm ,
-while designed to be fully compatible with
+The
+.Nm
+utility, while designed to be fully compatible with
 .Xr mount_mfs 8 ,
 can be useful by itself.
 Since
diff --git a/sbin/mknod/mknod.8 b/sbin/mknod/mknod.8
index 9f36c52..541df7d 100644
--- a/sbin/mknod/mknod.8
+++ b/sbin/mknod/mknod.8
@@ -47,7 +47,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-command creates device special files.
+utility creates device special files.
 Normally the shell script
 .Pa /dev/MAKEDEV
 is used to create special files for commonly known devices; it executes
@@ -130,5 +130,5 @@ being mounted.
 .Sh HISTORY
 A
 .Nm
-command appeared in
+utility appeared in
 .At v6 .
diff --git a/sbin/mount/mount.8 b/sbin/mount/mount.8
index 6f2188e..f6012b3 100644
--- a/sbin/mount/mount.8
+++ b/sbin/mount/mount.8
@@ -53,8 +53,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-command
-calls the
+utility calls the
 .Xr mount 2
 system call to prepare and graft a
 .Ar "special device"
@@ -401,5 +400,5 @@ directions to be possible for all users is 0111 (execute for all).
 .Sh HISTORY
 A
 .Nm
-command appeared in
+utility appeared in
 .At v1 .
diff --git a/sbin/mount_cd9660/mount_cd9660.8 b/sbin/mount_cd9660/mount_cd9660.8
index 118e2de..644afda 100644
--- a/sbin/mount_cd9660/mount_cd9660.8
+++ b/sbin/mount_cd9660/mount_cd9660.8
@@ -51,7 +51,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-command attaches the ISO-9660 filesystem residing on the device
+utility attaches the ISO-9660 filesystem residing on the device
 .Pa special
 to the global filesystem namespace at the location indicated by
 .Pa node .
diff --git a/sbin/mount_ext2fs/mount_ext2fs.8 b/sbin/mount_ext2fs/mount_ext2fs.8
index 8c2dbcd..7bedb82 100644
--- a/sbin/mount_ext2fs/mount_ext2fs.8
+++ b/sbin/mount_ext2fs/mount_ext2fs.8
@@ -45,7 +45,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-command attaches a ext2fs filesystem
+utility attaches a ext2fs filesystem
 .Ar special
 device on to the filesystem tree at the point
 .Ar node .
@@ -72,5 +72,5 @@ man page for possible options and their meanings.
 .Sh HISTORY
 The
 .Nm
-function first appeared in
+utility first appeared in
 .Fx 2.2 .
diff --git a/sbin/mount_hpfs/mount_hpfs.8 b/sbin/mount_hpfs/mount_hpfs.8
index 3b62e40..e328748 100644
--- a/sbin/mount_hpfs/mount_hpfs.8
+++ b/sbin/mount_hpfs/mount_hpfs.8
@@ -47,7 +47,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-command attaches the HPFS filesystem residing on the device
+utility attaches the HPFS filesystem residing on the device
 .Pa special
 to the global filesystem namespace at the location
 indicated by
@@ -91,7 +91,7 @@ It is strongly recomended to mount readonly!
 .Sh HISTORY
 The
 .Nm
-first appered in
+utility first appered in
 .Fx 3.0 .
 .Sh AUTHORS
 HPFS kernel implementation,
diff --git a/sbin/mount_msdosfs/mount_msdosfs.8 b/sbin/mount_msdosfs/mount_msdosfs.8
index 184a9ad..c2c263d 100644
--- a/sbin/mount_msdosfs/mount_msdosfs.8
+++ b/sbin/mount_msdosfs/mount_msdosfs.8
@@ -53,7 +53,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-command attaches the MS-DOS filesystem residing on
+utility attaches the MS-DOS filesystem residing on
 the device
 .Pa special
 to the global filesystem namespace at the location
diff --git a/sbin/mount_nfs/mount_nfs.8 b/sbin/mount_nfs/mount_nfs.8
index 7867c82..06e8c8f 100644
--- a/sbin/mount_nfs/mount_nfs.8
+++ b/sbin/mount_nfs/mount_nfs.8
@@ -56,8 +56,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-command
-calls the
+utility calls the
 .Xr mount 2
 system call to prepare and graft a remote nfs filesystem
 .Pq Ar rhost : Ns Ar path
diff --git a/sbin/mount_ntfs/mount_ntfs.8 b/sbin/mount_ntfs/mount_ntfs.8
index e29aeb9..f00ec12 100644
--- a/sbin/mount_ntfs/mount_ntfs.8
+++ b/sbin/mount_ntfs/mount_ntfs.8
@@ -49,7 +49,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-command attaches the NTFS filesystem residing on the device
+utility attaches the NTFS filesystem residing on the device
 .Pa special
 to the global filesystem namespace at the location
 indicated by
@@ -139,7 +139,7 @@ section for details about writing to an NTFS volume.
 .Sh HISTORY
 The
 .Nm
-first appeared in
+utility first appeared in
 .Fx 3.0 .
 .Sh AUTHORS
 The NTFS kernel implementation,
diff --git a/sbin/mount_nullfs/mount_nullfs.8 b/sbin/mount_nullfs/mount_nullfs.8
index eb6ae85..a6f8312 100644
--- a/sbin/mount_nullfs/mount_nullfs.8
+++ b/sbin/mount_nullfs/mount_nullfs.8
@@ -51,7 +51,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-command creates a
+utility creates a
 null layer, duplicating a sub-tree of the filesystem
 name space under another part of the global filesystem namespace.
 This allows existing files and directories to be accessed
@@ -103,8 +103,9 @@ for constructing new layers.
 .Sh INSTANTIATING NEW NULL LAYERS
 New null layers are created with
 .Nm .
-.Nm Mount_nullfs
-takes two arguments, the pathname
+The
+.Nm
+utility takes two arguments, the pathname
 of the lower vfs (target-pn) and the pathname where the null
 layer will appear in the namespace (mount-point-pn).  After
 the null layer is put into place, the contents
diff --git a/sbin/mount_nwfs/mount_nwfs.8 b/sbin/mount_nwfs/mount_nwfs.8
index 964c453..341ec78 100644
--- a/sbin/mount_nwfs/mount_nwfs.8
+++ b/sbin/mount_nwfs/mount_nwfs.8
@@ -29,7 +29,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-command allows to mount volume from a NetWare server.
+utility allows to mount volume from a NetWare server.
 It may use either
 existing connection or create new: if no usable connection was found
 it will try to establish a new one.
diff --git a/sbin/mount_portalfs/mount_portalfs.8 b/sbin/mount_portalfs/mount_portalfs.8
index 8d0bd22..daaed15 100644
--- a/sbin/mount_portalfs/mount_portalfs.8
+++ b/sbin/mount_portalfs/mount_portalfs.8
@@ -51,7 +51,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-command attaches an instance of the portal daemon
+utility attaches an instance of the portal daemon
 to the global filesystem namespace.
 The conventional mount point is
 .Pa /p .
diff --git a/sbin/mount_std/mount_std.8 b/sbin/mount_std/mount_std.8
index d0039c3..d699838 100644
--- a/sbin/mount_std/mount_std.8
+++ b/sbin/mount_std/mount_std.8
@@ -56,10 +56,10 @@ filesystems
 .Sh DESCRIPTION
 The
 .Nm
-command is a generic mechanism for attaching ``standard'' filesystems to
+utility is a generic mechanism for attaching ``standard'' filesystems to
 the filesystem.  The
 .Nm
-command currently supports the following filesystems:
+utility currently supports the following filesystems:
 .Nm devfs ,
 .Nm fdescfs ,
 .Nm linprocfs
@@ -84,7 +84,7 @@ has a kernel filesystem module name the same as its user-visible name.
 .It
 requires no other special processing on the part of the
 .Nm
-command.
+utility.
 .El
 .Pp
 The options are as follows:
@@ -100,7 +100,7 @@ man page for possible options and their meanings.
 .Pp
 The
 .Nm
-command examines its zeroth command-line argument (the name by which
+utility examines its zeroth command-line argument (the name by which
 it was called) to determine the type of filesystem to be mounted.  If
 it is called by a name which does not end in
 .Dq Li _ Ns Ar fsname ,
@@ -111,12 +111,12 @@ with
 that the zeroth argument contains only the name of the filesystem type.
 The
 .Nm
-command is normally installed with appropriate links to commands for
+utility is normally installed with appropriate links to commands for
 the distributed filesystems which can be mounted in this way;
 for information on the function of each filesystem, see the manual page
 for that specific
 .Nm mount_ Ns Ar fsname
-command.
+utility.
 .Pp
 Refer to the following manual pages for detailed information
 on these filesystem:
@@ -128,12 +128,14 @@ and
 .Sh DIAGNOSTICS
 .Bl -diag
 .It argv[0] must end in _fsname
-.Nm Mount_std
-was called with a zeroth argument of
+The
+.Nm
+utility was called with a zeroth argument of
 .Dq Li mount_std .
 .It vfsload(%s)
-.Nm Mount_std
-was unable to load a kernel module implementing the %s filesystem
+The
+.Nm
+utility was unable to load a kernel module implementing the %s filesystem
 type.
 .It %s filesystem not available
 The specified filesystem type was not present in the kernel and no
diff --git a/sbin/mount_umapfs/mount_umapfs.8 b/sbin/mount_umapfs/mount_umapfs.8
index 8b50352..133c80a 100644
--- a/sbin/mount_umapfs/mount_umapfs.8
+++ b/sbin/mount_umapfs/mount_umapfs.8
@@ -52,7 +52,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-command is used to mount a sub-tree of an existing filesystem
+utility is used to mount a sub-tree of an existing filesystem
 that uses a different set of uids and gids than the local system.
 Such a filesystem could be mounted from a remote site via NFS or
 it could be a filesystem on removable media brought from some
@@ -60,13 +60,13 @@ foreign location that uses a different password file.
 .Pp
 The
 .Nm
-command uses a set of files provided by the user to make correspondences
+utility uses a set of files provided by the user to make correspondences
 between uids and gids in the sub-tree's original environment and
 some other set of ids in the local environment.  For instance, user
 smith might have uid 1000 in the original environment, while having
 uid 2000 in the local environment.  The
 .Nm
-command allows the subtree from smith's original environment to be
+utility allows the subtree from smith's original environment to be
 mapped in such a way that all files with owning uid 1000 look like
 they are actually owned by uid 2000.
 .Pp
@@ -110,14 +110,15 @@ at most 16 groups can be mapped by a given subtree.
 .Pp
 The mapfiles can be located anywhere in the file hierarchy, but they
 must be owned by root, and they must be writable only by root.
-.Nm Mount_umapfs
-will refuse to map the sub-tree if the ownership or permissions on
+The
+.Nm
+utility will refuse to map the sub-tree if the ownership or permissions on
 these files are improper.  It will also balk if the count of mappings
 in the first line of the map files is not correct.
 .Pp
 The layer created by the
 .Nm
-command is meant to serve as a simple example of filesystem layering.
+utility is meant to serve as a simple example of filesystem layering.
 It is not meant for production use.  The implementation is not very
 sophisticated.
 .Sh SEE ALSO
diff --git a/sbin/mount_unionfs/mount_unionfs.8 b/sbin/mount_unionfs/mount_unionfs.8
index 2bd06ad..90d6523 100644
--- a/sbin/mount_unionfs/mount_unionfs.8
+++ b/sbin/mount_unionfs/mount_unionfs.8
@@ -50,8 +50,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-command
-attaches
+utility attaches
 .Ar directory
 above
 .Ar uniondir
@@ -208,7 +207,7 @@ a tree of shadow directories in the upper layer.
 .Sh HISTORY
 The
 .Nm
-command first appeared in
+utility first appeared in
 .Bx 4.4 .
 It first worked in
 .Fx Ns -(fill this in) .
diff --git a/sbin/mountd/mountd.8 b/sbin/mountd/mountd.8
index 7df3761..0be0e73 100644
--- a/sbin/mountd/mountd.8
+++ b/sbin/mountd/mountd.8
@@ -45,8 +45,9 @@ mount requests
 .Op Fl 2dlnr
 .Op Ar exportsfile
 .Sh DESCRIPTION
-.Nm Mountd
-is the server for
+The
+.Nm
+utility is the server for
 .Tn NFS
 mount requests from other client machines.
 It listens for service requests at the port indicated in the
diff --git a/sbin/natd/natd.8 b/sbin/natd/natd.8
index 0a37392..f9ce898 100644
--- a/sbin/natd/natd.8
+++ b/sbin/natd/natd.8
@@ -34,7 +34,9 @@
 .Op Fl log_ipfw_denied
 .Ek
 .Sh DESCRIPTION
-This program provides a Network Address Translation facility for use
+The
+.Nm
+utility provides a Network Address Translation facility for use
 with
 .Xr divert 4
 sockets under
@@ -47,7 +49,7 @@ switch to
 .Pp
 The
 .Nm
-normally runs in the background as a daemon.
+utility normally runs in the background as a daemon.
 It is passed raw IP packets as they travel into and out of the machine,
 and will possibly change these before re-injecting them back into the
 IP packet stream.
diff --git a/sbin/newfs/newfs.8 b/sbin/newfs/newfs.8
index c20fe15..7bd4205 100644
--- a/sbin/newfs/newfs.8
+++ b/sbin/newfs/newfs.8
@@ -58,14 +58,16 @@
 .Op Fl s Ar size
 .Ar special
 .Sh DESCRIPTION
-.Nm Newfs
-is used to initialize and clear filesystems before first use.
+The
+.Nm
+utility is used to initialize and clear filesystems before first use.
 Before running
 .Nm
 the disk must be labeled using
 .Xr disklabel 8 .
-.Nm Newfs
-builds a filesystem on the specified special file.
+The
+.Nm
+utility builds a filesystem on the specified special file.
 (We often refer to the
 .Dq special file
 as the
@@ -194,8 +196,9 @@ The size of a sector in bytes (almost never anything but 512).
 .Pp
 Creates a new ufs filesystem on
 .Pa ad3s1a .
+The
 .Nm
-will use a block size of 16384 bytes, a fragment size of 2048 bytes
+utility will use a block size of 16384 bytes, a fragment size of 2048 bytes
 and the largest possible number of blocks per cylinders group.
 These values tend to produce better performance for most applications
 than the historical defaults
@@ -229,5 +232,5 @@ on filesystems that contain many small files.
 .Sh HISTORY
 The
 .Nm
-command appeared in
+utility appeared in
 .Bx 4.2 .
diff --git a/sbin/newfs_msdos/newfs_msdos.8 b/sbin/newfs_msdos/newfs_msdos.8
index 8c4a608..8771a7c 100644
--- a/sbin/newfs_msdos/newfs_msdos.8
+++ b/sbin/newfs_msdos/newfs_msdos.8
@@ -178,7 +178,7 @@ Exit status is 0 on success and 1 on error.
 .Sh HISTORY
 The
 .Nm
-command first appeared in
+utility first appeared in
 .Fx 3.0 .
 .Sh AUTHORS
 .An Robert Nordier Aq rnordier@FreeBSD.org .
diff --git a/sbin/nfsd/nfsd.8 b/sbin/nfsd/nfsd.8
index 666a863..76d4247 100644
--- a/sbin/nfsd/nfsd.8
+++ b/sbin/nfsd/nfsd.8
@@ -46,8 +46,9 @@ server
 .Op Fl n Ar num_servers
 .Op Fl h Ar bindip
 .Sh DESCRIPTION
-.Nm Nfsd
-runs on a server machine to service
+The
+.Nm
+utility runs on a server machine to service
 .Tn NFS
 requests from client machines.
 At least one
@@ -115,8 +116,9 @@ A server should run enough daemons to handle
 the maximum level of concurrency from its clients,
 typically four to six.
 .Pp
-.Nm Nfsd
-listens for service requests at the port indicated in the
+The
+.Nm
+utility listens for service requests at the port indicated in the
 .Tn NFS
 server specification; see
 .%T "Network File System Protocol Specification" ,
@@ -149,19 +151,23 @@ option is recommended.  If you do not use the option NFS may not respond to
 UDP packets from the same IP address they were sent to.  Use of this option
 is also recommended when securing NFS exports on a firewalling machine such
 that the NFS sockets can only be accessed by the inside interface.
-.Nm Ipfw
+The
+.Nm ipfw
+utility
 would then be used to block nfs-related packets that come in on the outside
 interface.
 .Pp
+The
 .Nm
-has to be terminated with
+utility has to be terminated with
 .Dv SIGUSR1
 and cannot be killed with
 .Dv SIGTERM
 or
 .Dv SIGQUIT .
+The
 .Nm
-needs to ignore these signals in order to stay alive as long
+utility needs to ignore these signals in order to stay alive as long
 as possible during a shutdown, otherwise loopback mounts will
 not be able to unmount.
 If you have to kill
diff --git a/sbin/nfsiod/nfsiod.8 b/sbin/nfsiod/nfsiod.8
index 189e54e..281c675 100644
--- a/sbin/nfsiod/nfsiod.8
+++ b/sbin/nfsiod/nfsiod.8
@@ -44,8 +44,9 @@ asynchronous I/O server
 .Nm
 .Op Fl n Ar num_servers
 .Sh DESCRIPTION
-.Nm Nfsiod
-kernel processes run on an
+The
+.Nm
+utility is a kernel process which run on an
 .Tn NFS
 client machine to service asynchronous I/O requests to its server.
 It improves performance but is not required for correct operation.
diff --git a/sbin/nologin/nologin.8 b/sbin/nologin/nologin.8
index 8903fa0..7f8f9ff 100644
--- a/sbin/nologin/nologin.8
+++ b/sbin/nologin/nologin.8
@@ -41,8 +41,9 @@
 .Sh SYNOPSIS
 .Nm
 .Sh DESCRIPTION
-.Nm Nologin
-displays a message that an account is not available and
+The
+.Nm
+utility displays a message that an account is not available and
 exits non-zero.
 It is intended as a replacement shell field for accounts that
 have been disabled.
@@ -56,5 +57,5 @@ investigate
 .Sh HISTORY
 The
 .Nm
-command appeared in
+utility appeared in
 .Bx 4.4 .
diff --git a/sbin/nos-tun/nos-tun.8 b/sbin/nos-tun/nos-tun.8
index 1499c71..0cfdeb1 100644
--- a/sbin/nos-tun/nos-tun.8
+++ b/sbin/nos-tun/nos-tun.8
@@ -26,8 +26,9 @@
 .Ar protocol_number
 .Ar target
 .Sh DESCRIPTION
-.Nm Nos-tun
-is used to establish an
+The
+.Nm
+utility is used to establish an
 .Em nos
 style tunnel, (also known as
 .Em ka9q
diff --git a/sbin/ping/ping.8 b/sbin/ping/ping.8
index cb3b42e..9f05cff 100644
--- a/sbin/ping/ping.8
+++ b/sbin/ping/ping.8
@@ -60,8 +60,9 @@ packets to network hosts
 .Ar mcast-group
 .Bc
 .Sh DESCRIPTION
-.Nm Ping
-uses the
+The
+.Nm
+utility uses the
 .Tn ICMP
 .No protocol Ap s mandatory
 .Tn ECHO_REQUEST
@@ -313,8 +314,9 @@ it uses in the computation of round trip times.
 If less than eight bytes of pad are specified, no round trip times are
 given.
 .Sh DUPLICATE AND DAMAGED PACKETS
-.Nm Ping
-will report duplicate and damaged packets.
+The
+.Nm
+utility will report duplicate and damaged packets.
 Duplicate packets should never occur when pinging a unicast address,
 and seem to be caused by
 inappropriate link-level retransmissions.
@@ -440,7 +442,7 @@ Others may use completely wild values.
 .Sh RETURN VALUES
 The
 .Nm
-command returns an exit status of zero if at least one response was
+utility returns an exit status of zero if at least one response was
 heard from the specified
 .Ar host ;
 a status of two if the transmission was successful but no responses
@@ -456,12 +458,12 @@ if an error occurred.
 .Sh HISTORY
 The
 .Nm
-command appeared in
+utility appeared in
 .Bx 4.3 .
 .Sh AUTHORS
 The original
 .Nm
-command was written by
+utility was written by
 .An Mike Muuss
 while at the US Army Ballistics
 Research Laboratory.
diff --git a/sbin/ping6/ping6.8 b/sbin/ping6/ping6.8
index 161f329..554bf2b 100644
--- a/sbin/ping6/ping6.8
+++ b/sbin/ping6/ping6.8
@@ -84,8 +84,9 @@ packets to network hosts
 .Ar host
 .Ek
 .Sh DESCRIPTION
+The
 .Nm
-uses the
+utility uses the
 .Tn ICMPv6
 protocol's mandatory
 .Tn ICMP6_ECHO_REQUEST
@@ -164,7 +165,7 @@ This can be very hard on a network and should be used with caution.
 Specifies to try reverse-lookup of IPv6 addresses.
 The
 .Nm
-command does not try reverse-lookup unless the option is specified.
+utility does not try reverse-lookup unless the option is specified.
 .It Fl h Ar hoplimit
 Set the IPv6 hoplimit.
 .It Fl I Ar interface
@@ -350,8 +351,9 @@ during normal operations or from automated scripts.
 .\" If less than eight bytes of pad are specified, no round trip times are
 .\" given.
 .Sh DUPLICATE AND DAMAGED PACKETS
+The
 .Nm
-will report duplicate and damaged packets.
+utility will report duplicate and damaged packets.
 Duplicate packets should never occur when pinging a unicast address,
 and seem to be caused by
 inappropriate link-level retransmissions.
@@ -398,8 +400,9 @@ using the
 option of
 .Nm .
 .Sh RETURN VALUES
+The
 .Nm
-returns 0 on success (the host is alive),
+utility returns 0 on success (the host is alive),
 and non-zero if the arguments are incorrect or the host is not responding.
 .Sh EXAMPLES
 Normally,
@@ -488,7 +491,7 @@ command appeared in
 .Bx 4.3 .
 The
 .Nm
-command with IPv6 support first appeared in WIDE Hydrangea IPv6 protocol stack
+utility with IPv6 support first appeared in WIDE Hydrangea IPv6 protocol stack
 kit.
 .Pp
 IPv6 and IPsec support based on the KAME Project (http://www.kame.net/) stack
diff --git a/sbin/quotacheck/quotacheck.8 b/sbin/quotacheck/quotacheck.8
index ed81fe2..069db3c 100644
--- a/sbin/quotacheck/quotacheck.8
+++ b/sbin/quotacheck/quotacheck.8
@@ -54,8 +54,9 @@
 .Op Fl v
 .Fl a
 .Sh DESCRIPTION
-.Nm Quotacheck
-examines each filesystem,
+The
+.Nm
+utility examines each filesystem,
 builds a table of current disk usage,
 and compares this table against that recorded
 in the disk quota file for the filesystem.
@@ -85,8 +86,7 @@ Only user quotas listed in
 .Pa /etc/fstab
 are to be checked.
 .It Fl v
-.Nm Quotacheck
-reports discrepancies between the
+Report discrepancies between the
 calculated and recorded disk quotas and other additional diagnostic messages.
 .El
 .Pp
@@ -105,8 +105,9 @@ Normally,
 .Nm
 operates silently.
 .Pp
-.Nm Quotacheck
-expects each filesystem to be checked to have a
+The
+.Nm
+utility expects each filesystem to be checked to have a
 quota files named
 .Pa quota.user
 and
@@ -121,8 +122,9 @@ These files should be edited with the
 .Xr edquota 8
 utility.
 .Pp
-.Nm Quotacheck
-is normally run at boot time from the
+The
+.Nm
+utility is normally run at boot time from the
 .Pa /etc/rc
 file.
 The rc startup procedure is controlled by the
@@ -137,8 +139,9 @@ with the variable
 in
 .Pa /etc/rc.conf .
 .Pp
-.Nm Quotacheck
-accesses the raw device in calculating the actual
+The
+.Nm
+utility accesses the raw device in calculating the actual
 disk usage for each user.
 Thus, the filesystems
 checked should be quiescent while
@@ -164,5 +167,5 @@ default filesystems
 .Sh HISTORY
 The
 .Nm
-command appeared in
+utility appeared in
 .Bx 4.2 .
diff --git a/usr.sbin/mount_nwfs/mount_nwfs.8 b/usr.sbin/mount_nwfs/mount_nwfs.8
index 964c453..341ec78 100644
--- a/usr.sbin/mount_nwfs/mount_nwfs.8
+++ b/usr.sbin/mount_nwfs/mount_nwfs.8
@@ -29,7 +29,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-command allows to mount volume from a NetWare server.
+utility allows to mount volume from a NetWare server.
 It may use either
 existing connection or create new: if no usable connection was found
 it will try to establish a new one.
diff --git a/usr.sbin/mount_portalfs/mount_portalfs.8 b/usr.sbin/mount_portalfs/mount_portalfs.8
index 8d0bd22..daaed15 100644
--- a/usr.sbin/mount_portalfs/mount_portalfs.8
+++ b/usr.sbin/mount_portalfs/mount_portalfs.8
@@ -51,7 +51,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-command attaches an instance of the portal daemon
+utility attaches an instance of the portal daemon
 to the global filesystem namespace.
 The conventional mount point is
 .Pa /p .
diff --git a/usr.sbin/mountd/mountd.8 b/usr.sbin/mountd/mountd.8
index 7df3761..0be0e73 100644
--- a/usr.sbin/mountd/mountd.8
+++ b/usr.sbin/mountd/mountd.8
@@ -45,8 +45,9 @@ mount requests
 .Op Fl 2dlnr
 .Op Ar exportsfile
 .Sh DESCRIPTION
-.Nm Mountd
-is the server for
+The
+.Nm
+utility is the server for
 .Tn NFS
 mount requests from other client machines.
 It listens for service requests at the port indicated in the
diff --git a/usr.sbin/nfsd/nfsd.8 b/usr.sbin/nfsd/nfsd.8
index 666a863..76d4247 100644
--- a/usr.sbin/nfsd/nfsd.8
+++ b/usr.sbin/nfsd/nfsd.8
@@ -46,8 +46,9 @@ server
 .Op Fl n Ar num_servers
 .Op Fl h Ar bindip
 .Sh DESCRIPTION
-.Nm Nfsd
-runs on a server machine to service
+The
+.Nm
+utility runs on a server machine to service
 .Tn NFS
 requests from client machines.
 At least one
@@ -115,8 +116,9 @@ A server should run enough daemons to handle
 the maximum level of concurrency from its clients,
 typically four to six.
 .Pp
-.Nm Nfsd
-listens for service requests at the port indicated in the
+The
+.Nm
+utility listens for service requests at the port indicated in the
 .Tn NFS
 server specification; see
 .%T "Network File System Protocol Specification" ,
@@ -149,19 +151,23 @@ option is recommended.  If you do not use the option NFS may not respond to
 UDP packets from the same IP address they were sent to.  Use of this option
 is also recommended when securing NFS exports on a firewalling machine such
 that the NFS sockets can only be accessed by the inside interface.
-.Nm Ipfw
+The
+.Nm ipfw
+utility
 would then be used to block nfs-related packets that come in on the outside
 interface.
 .Pp
+The
 .Nm
-has to be terminated with
+utility has to be terminated with
 .Dv SIGUSR1
 and cannot be killed with
 .Dv SIGTERM
 or
 .Dv SIGQUIT .
+The
 .Nm
-needs to ignore these signals in order to stay alive as long
+utility needs to ignore these signals in order to stay alive as long
 as possible during a shutdown, otherwise loopback mounts will
 not be able to unmount.
 If you have to kill
diff --git a/usr.sbin/nologin/nologin.8 b/usr.sbin/nologin/nologin.8
index 8903fa0..7f8f9ff 100644
--- a/usr.sbin/nologin/nologin.8
+++ b/usr.sbin/nologin/nologin.8
@@ -41,8 +41,9 @@
 .Sh SYNOPSIS
 .Nm
 .Sh DESCRIPTION
-.Nm Nologin
-displays a message that an account is not available and
+The
+.Nm
+utility displays a message that an account is not available and
 exits non-zero.
 It is intended as a replacement shell field for accounts that
 have been disabled.
@@ -56,5 +57,5 @@ investigate
 .Sh HISTORY
 The
 .Nm
-command appeared in
+utility appeared in
 .Bx 4.4 .