mdoc: correct .Bd/.Bl arguments.

Reviewed by:	brueffer

10 files changed, 34 insertions, 34 deletions

diff --git a/lib/libc/iconv/iconvctl.3 b/lib/libc/iconv/iconvctl.3
index 30fc0aa..c5b7d50 100644
--- a/lib/libc/iconv/iconvctl.3
+++ b/lib/libc/iconv/iconvctl.3
@@ -61,7 +61,7 @@ parameter specifies the operation to accomplish and
 is an operation-specific argument.
 .Pp
 The possible operations are the following:
-.Bl -tag -width -indent
+.Bl -tag -width indent
 .It ICONV_TRIVIALP
 In this case
 .Fa argument
diff --git a/lib/libc/net/getipnodebyname.3 b/lib/libc/net/getipnodebyname.3
index 615c5bb..0697c64 100644
--- a/lib/libc/net/getipnodebyname.3
+++ b/lib/libc/net/getipnodebyname.3
@@ -108,13 +108,13 @@ We note that a special flags value of
 (defined below)
 should handle most applications.
 That is, porting simple applications to use IPv6 replaces the call
-.Bd -literal -offset
-   hptr = gethostbyname(name);
+.Bd -literal -offset indent
+hptr = gethostbyname(name);
 .Ed
 .Pp
 with
-.Bd -literal -offset
-   hptr = getipnodebyname(name, AF_INET6, AI_DEFAULT, &error_num);
+.Bd -literal -offset indent
+hptr = getipnodebyname(name, AF_INET6, AI_DEFAULT, &error_num);
 .Ed
 .Pp
 Applications desiring finer control over the types of addresses
@@ -270,8 +270,8 @@ records are returned as IPv4-mapped IPv6 addresses;
 The special flags value of
 .Dv AI_DEFAULT
 is defined as
-.Bd -literal -offset
-   #define  AI_DEFAULT  (AI_V4MAPPED_CFG | AI_ADDRCONFIG)
+.Bd -literal -offset indent
+#define  AI_DEFAULT  (AI_V4MAPPED_CFG | AI_ADDRCONFIG)
 .Ed
 .Pp
 We noted that the
diff --git a/sbin/setkey/setkey.8 b/sbin/setkey/setkey.8
index 01c31fb..6046bad 100644
--- a/sbin/setkey/setkey.8
+++ b/sbin/setkey/setkey.8
@@ -651,48 +651,48 @@ deflate		rfc2394
 .Sh EXAMPLES
 Add an ESP SA between two IPv6 addresses using the
 des-cbc encryption algorithm.
-.Bd -literal -offset
+.Bd -literal -offset indent
 add 3ffe:501:4819::1 3ffe:501:481d::1 esp 123457
 	-E des-cbc 0x3ffe05014819ffff ;
 
 .Ed
 .\"
 Add an authentication SA between two FQDN specified hosts:
-.Bd -literal -offset
+.Bd -literal -offset indent
 add -6 myhost.example.com yourhost.example.com ah 123456
 	-A hmac-sha1 "AH SA configuration!" ;
 
 .Ed
 Use both ESP and AH between two numerically specified hosts:
-.Bd -literal -offset
+.Bd -literal -offset indent
 add 10.0.11.41 10.0.11.33 esp 0x10001
 	-E des-cbc 0x3ffe05014819ffff
 	-A hmac-md5 "authentication!!" ;
 
 .Ed
 Get the SA information associated with first example above:
-.Bd -literal -offset
+.Bd -literal -offset indent
 get 3ffe:501:4819::1 3ffe:501:481d::1 ah 123456 ;
 
 .Ed
 Flush all entries from the database:
-.Bd -literal -offset
+.Bd -literal -offset indent
 flush ;
 
 .Ed
 Dump the ESP entries from the database:
-.Bd -literal -offset
+.Bd -literal -offset indent
 dump esp ;
 
 .Ed
 Add a security policy between two networks that uses ESP in tunnel mode:
-.Bd -literal -offset
+.Bd -literal -offset indent
 spdadd 10.0.11.41/32[21] 10.0.11.33/32[any] any
 	-P out ipsec esp/tunnel/192.168.0.1-192.168.1.2/require ;
 
 .Ed
 Use TCP MD5 between two numerically specified hosts:
-.Bd -literal -offset
+.Bd -literal -offset indent
 add 10.1.10.34 10.1.10.36 tcp 0x1000 -A tcp-md5 "TCP-MD5 BGP secret" ;
 
 .Ed
diff --git a/usr.sbin/ac/ac.8 b/usr.sbin/ac/ac.8
index 34484ab..63b5618 100644
--- a/usr.sbin/ac/ac.8
+++ b/usr.sbin/ac/ac.8
@@ -112,7 +112,7 @@ No login or connect time accounting is performed if
 does not exist.
 .Pp
 For example,
-.Bd -literal -offset
+.Bd -literal -offset indent
 ac -p -t "ttyd*" > modems
 ac -p -t "!ttyd*" > other
 .Ed
diff --git a/usr.sbin/apmd/apmd.8 b/usr.sbin/apmd/apmd.8
index 3c2de63..5bfd9dc 100644
--- a/usr.sbin/apmd/apmd.8
+++ b/usr.sbin/apmd/apmd.8
@@ -66,7 +66,7 @@ built-in functions in the configuration file.
 The
 .Nm
 utility recognizes the following runtime options:
-.Bl -tag -width -f_file
+.Bl -tag -width f_file
 .It Fl d
 Starts in debug mode.
 This causes
diff --git a/usr.sbin/faithd/faithd.8 b/usr.sbin/faithd/faithd.8
index 827d00e..93a835b 100644
--- a/usr.sbin/faithd/faithd.8
+++ b/usr.sbin/faithd/faithd.8
@@ -281,7 +281,7 @@ Before invoking
 the
 .Xr faith 4
 interface has to be configured properly.
-.Bd -literal -offset
+.Bd -literal -offset indent
 # sysctl net.inet6.ip6.accept_rtadv=0
 # sysctl net.inet6.ip6.forwarding=1
 # sysctl net.inet6.ip6.keepfaith=1
@@ -295,7 +295,7 @@ To translate
 service, and provide no local telnet service, invoke
 .Nm
 as follows:
-.Bd -literal -offset
+.Bd -literal -offset indent
 # faithd telnet
 .Ed
 .Pp
@@ -304,12 +304,12 @@ If you would like to provide local telnet service via
 on
 .Pa /usr/libexec/telnetd ,
 use the following command line:
-.Bd -literal -offset
+.Bd -literal -offset indent
 # faithd telnet /usr/libexec/telnetd telnetd
 .Ed
 .Pp
 If you would like to pass extra arguments to the local daemon:
-.Bd -literal -offset
+.Bd -literal -offset indent
 # faithd ftp /usr/libexec/ftpd ftpd -l
 .Ed
 .Pp
@@ -317,7 +317,7 @@ Here are some other examples.
 You may need
 .Fl p
 if the service checks the source port range.
-.Bd -literal -offset
+.Bd -literal -offset indent
 # faithd ssh
 # faithd telnet /usr/libexec/telnetd telnetd
 .Ed
@@ -325,7 +325,7 @@ if the service checks the source port range.
 Add the following lines into
 .Xr inetd.conf 5 .
 Syntax may vary depending upon your operating system.
-.Bd -literal -offset
+.Bd -literal -offset indent
 telnet  stream  tcp6/faith  nowait  root  faithd  telnetd
 ftp     stream  tcp6/faith  nowait  root  faithd  ftpd -l
 ssh     stream  tcp6/faith  nowait  root  faithd  /usr/sbin/sshd -i
@@ -349,7 +349,7 @@ will invoke service-specific daemon like
 The following illustrates a simple
 .Pa faithd.conf
 setting.
-.Bd -literal -offset
+.Bd -literal -offset indent
 # permit anyone from 3ffe:501:ffff::/48 to use the translator,
 # to connect to the following IPv4 destinations:
 # - any location except 10.0.0.0/8 and 127.0.0.0/8.
diff --git a/usr.sbin/mfiutil/mfiutil.8 b/usr.sbin/mfiutil/mfiutil.8
index 5ccdcdc..b1be5d9 100644
--- a/usr.sbin/mfiutil/mfiutil.8
+++ b/usr.sbin/mfiutil/mfiutil.8
@@ -250,7 +250,7 @@ parameter limits the output to entries at the specified class or higher.
 The default class is
 .Dq warn .
 The available classes from lowest priority to highest are:
-.Bl -tag -width -indent
+.Bl -tag -width indent
 .It Cm debug
 Debug messages.
 .It Cm progress
@@ -300,7 +300,7 @@ and
 parameters.
 Each of these parameters can either be specified as a log entry number or as
 one of the following aliases:
-.Bl -tag -width -indent
+.Bl -tag -width indent
 .It Cm newest
 The newest entry in the event log.
 .It Cm oldest
diff --git a/usr.sbin/pmcstat/pmcstat.8 b/usr.sbin/pmcstat/pmcstat.8
index b033357..86eba09 100644
--- a/usr.sbin/pmcstat/pmcstat.8
+++ b/usr.sbin/pmcstat/pmcstat.8
@@ -388,7 +388,7 @@ If option
 is specified,
 .Nm
 may issue the following diagnostic messages:
-.Bl -diag -width indent
+.Bl -diag
 .It "#callchain/dubious-frames"
 The number of callchain records that had an
 .Dq impossible
diff --git a/usr.sbin/rtadvd/rtadvd.conf.5 b/usr.sbin/rtadvd/rtadvd.conf.5
index ba2f490..e8b3011 100644
--- a/usr.sbin/rtadvd/rtadvd.conf.5
+++ b/usr.sbin/rtadvd/rtadvd.conf.5
@@ -449,7 +449,7 @@ With the following configuration,
 overrides the router lifetime parameter for the
 .Li ne0
 interface.
-.Bd -literal -offset
+.Bd -literal -offset indent
 ne0:\\
 	:rltime#0:
 .Ed
@@ -461,7 +461,7 @@ The configuration must be used with the
 .Fl s
 option to
 .Xr rtadvd 8 .
-.Bd -literal -offset
+.Bd -literal -offset indent
 ef0:\\
 	:addr="2001:db8:ffff:1000::":prefixlen#64:
 .Ed
@@ -470,7 +470,7 @@ The following example configures the
 .Li wlan0
 interface and adds two DNS servers and a DNS domain search options
 using the default option lifetime values.
-.Bd -literal -offset
+.Bd -literal -offset indent
 wlan0:\\
 	:addr="2001:db8:ffff:1000::":prefixlen#64:\\
 	:rdnss="2001:db8:ffff::10,2001:db8:ffff::2:43":\\
@@ -480,7 +480,7 @@ wlan0:\\
 The following example presents the default values in an explicit manner.
 The configuration is provided just for reference purposes;
 YOU DO NOT NEED TO HAVE IT AT ALL.
-.Bd -literal -offset
+.Bd -literal -offset indent
 default:\\
 	:chlim#64:raflags#0:rltime#1800:rtime#0:retrans#0:\\
 	:pinfoflags="la":vltime#2592000:pltime#604800:mtu#0:
diff --git a/usr.sbin/wlconfig/wlconfig.8 b/usr.sbin/wlconfig/wlconfig.8
index 1c19997..b448339 100644
--- a/usr.sbin/wlconfig/wlconfig.8
+++ b/usr.sbin/wlconfig/wlconfig.8
@@ -97,12 +97,12 @@ utility should then be used to reconfigure the card to a sensible
 value.
 .Sh EXAMPLES
 Set the NWID to 0x1234:
-.Bd -literal -offset
+.Bd -literal -offset indent
 # wlconfig wl0 nwid 0x1234
 .Ed
 .Pp
 Show the current settings:
-.Bd -literal -offset
+.Bd -literal -offset indent
 # wlconfig wl0
 Board type            : ISA
 Base address options  : 0x300, 0x390, 0x3c0, 0x3e0
@@ -128,7 +128,7 @@ CRC status            : OK
 .Ed
 .Pp
 Print a scaled version of the signal strength cache:
-.Bd -literal -offset
+.Bd -literal -offset indent
 # wlconfig wl0 cache scale
 .Ed
 .Sh SEE ALSO