Synchronize with sys/i386/isa/syscons.c revision 1.217.

1 files changed, 174 insertions, 76 deletions

diff --git a/sys/pc98/pc98/syscons.c b/sys/pc98/pc98/syscons.c
index 417547e..922ae0c 100644
--- a/sys/pc98/pc98/syscons.c
+++ b/sys/pc98/pc98/syscons.c
@@ -25,7 +25,7 @@
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
- *  $Id: syscons.c,v 1.39 1997/05/08 09:22:32 kato Exp $
+ *  $Id: syscons.c,v 1.40 1997/05/17 11:52:26 kato Exp $
  */
 
 #include "sc.h"
@@ -80,7 +80,7 @@
 #include <i386/isa/kbdtables.h>
 #include <i386/isa/kbdio.h>
 #include <i386/isa/syscons.h>
-#endif
+#endif /* PC98 */
 
 #if defined(PC98) && defined(LINE30)
 #include <pc98/pc98/30line.h>
@@ -112,7 +112,7 @@ static default_attr kernel_default = {
     (FG_WHITE | BG_BLACK) << 8,
     (FG_BLACK | BG_LIGHTGREY) << 8
 };
-#endif
+#endif /* PC98 */
 
 static  scr_stat    	main_console;
 static  scr_stat    	*console[MAXCONS];
@@ -135,6 +135,7 @@ static  int        	blinkrate = 0;
 #ifndef PC98
 	u_int       	crtc_addr = MONO_BASE;
 #endif
+	char		crtc_type = KD_MONO;
 	char        	crtc_vga = FALSE;
 static  u_char      	shfts = 0, ctls = 0, alts = 0, agrs = 0, metas = 0;
 #ifdef PC98
@@ -210,10 +211,17 @@ static const int	nsccons = MAXCONS+2;
 #endif
 #define ISSIGVALID(sig)	((sig) > 0 && (sig) < NSIG)
 
+/* this should really be in `rtc.h' */
+#define RTC_EQUIPMENT		0x14
+
 /* prototypes */
 static int scattach(struct isa_device *dev);
 static int scparam(struct tty *tp, struct termios *t);
 static int scprobe(struct isa_device *dev);
+#ifndef PC98
+static int scvidprobe(int unit, int flags);
+static int sckbdprobe(int unit, int flags);
+#endif
 static void scstart(struct tty *tp);
 static void scmousestart(struct tty *tp);
 static void scinit(void);
@@ -406,17 +414,127 @@ scprobe(struct isa_device *dev)
     sc_kbdc = kbdc_open(sc_port);
     return(16);
 #else
+    if (!scvidprobe(dev->id_unit, dev->id_flags)) {
+	if (bootverbose)
+	    printf("sc%d: no video adapter is found.\n", dev->id_unit);
+	return (0);
+    }
+
+    sc_port = dev->id_iobase;
+    if (sckbdprobe(dev->id_unit, dev->id_flags))
+	return (IO_KBDSIZE);
+    else
+        return ((dev->id_flags & DETECT_KBD) ? 0 : IO_KBDSIZE);
+#endif
+}
+
+#ifndef PC98
+/* probe video adapters, return TRUE if found */ 
+static int
+scvidprobe(int unit, int flags)
+{
+    /* 
+     * XXX don't try to `printf' anything here, the console may not have 
+     * been configured yet. 
+     */
+    u_short volatile *cp;
+    u_short was;
+    u_long  pa;
+    u_long  segoff;
+
+    /* do this test only once */
+    if (init_done != COLD)
+	return (Crtat != 0);
+
+    /*
+     * Finish defaulting crtc variables for a mono screen.  Crtat is a
+     * bogus common variable so that it can be shared with pcvt, so it
+     * can't be statically initialized.  XXX.
+     */
+    Crtat = (u_short *)MONO_BUF;
+    crtc_type = KD_MONO;
+    /* If CGA memory seems to work, switch to color.  */
+    cp = (u_short *)CGA_BUF;
+    was = *cp;
+    *cp = (u_short) 0xA55A;
+    if (*cp == 0xA55A) {
+	Crtat = (u_short *)CGA_BUF;
+	crtc_addr = COLOR_BASE;
+	crtc_type = KD_CGA;
+    } else {
+        cp = Crtat;
+	was = *cp;
+	*cp = (u_short) 0xA55A;
+	if (*cp != 0xA55A) {
+	    /* no screen at all, bail out */
+	    Crtat = 0;
+	    return FALSE;
+	}
+    }
+    *cp = was;
+
+    /* 
+     * Check rtc and BIOS date area.
+     * XXX: don't use BIOSDATA_EQUIPMENT, it is not a dead copy
+     * of RTC_EQUIPMENT. The bit 4 and 5 of the ETC_EQUIPMENT are
+     * zeros for EGA and VGA. However, the EGA/VGA BIOS will set 
+     * these bits in BIOSDATA_EQUIPMENT according to the monitor
+     * type detected.
+     */
+    switch ((rtcin(RTC_EQUIPMENT) >> 4) & 3) {	/* bit 4 and 5 */
+    case 0: /* EGA/VGA, or nothing */
+	crtc_type = KD_EGA;
+	/* the color adapter may be in the 40x25 mode... XXX */
+	break;
+    case 1: /* CGA 40x25 */
+	/* switch to the 80x25 mode? XXX */
+	/* FALL THROUGH */
+    case 2: /* CGA 80x25 */
+	/* `crtc_type' has already been set... */
+	/* crtc_type = KD_CGA; */
+	break;
+    case 3: /* MDA */
+	/* `crtc_type' has already been set... */
+	/* crtc_type = KD_MONO; */
+	break;
+    }
+
+    /* is this a VGA or higher ? */
+    outb(crtc_addr, 7);
+    if (inb(crtc_addr) == 7) {
+
+        crtc_type = KD_VGA;
+	crtc_vga = TRUE;
+	read_vgaregs(vgaregs);
+
+	/* Get the BIOS video mode pointer */
+	segoff = *(u_long *)pa_to_va(0x4a8);
+	pa = (((segoff & 0xffff0000) >> 12) + (segoff & 0xffff));
+	if (ISMAPPED(pa, sizeof(u_long))) {
+	    segoff = *(u_long *)pa_to_va(pa);
+	    pa = (((segoff & 0xffff0000) >> 12) + (segoff & 0xffff));
+	    if (ISMAPPED(pa, 64))
+		video_mode_ptr = (char *)pa_to_va(pa);
+	}
+    }
+
+    return TRUE;
+}
+
+/* probe the keyboard, return TRUE if found */
+static int
+sckbdprobe(int unit, int flags)
+{
     int codeset;
     int c = -1;
     int m;
 
-    sc_port = dev->id_iobase;
     sc_kbdc = kbdc_open(sc_port);
 
     if (!kbdc_lock(sc_kbdc, TRUE)) {
 	/* driver error? */
-	printf("sc%d: unable to lock the controller.\n", dev->id_unit);
-        return ((dev->id_flags & DETECT_KBD) ? 0 : IO_KBDSIZE);
+	printf("sc%d: unable to lock the controller.\n", unit);
+        return ((flags & DETECT_KBD) ? FALSE : TRUE);
     }
 
     /* discard anything left after UserConfig */
@@ -427,26 +545,35 @@ scprobe(struct isa_device *dev)
     c = get_controller_command_byte(sc_kbdc);
     if (c == -1) {
 	/* CONTROLLER ERROR */
-	printf("sc%d: unable to get the current command byte value.\n",
-	    dev->id_unit);
+	printf("sc%d: unable to get the current command byte value.\n", unit);
 	goto fail;
     }
     if (bootverbose)
 	printf("sc%d: the current keyboard controller command byte %04x\n",
-	    dev->id_unit, c);
+	    unit, c);
 #if 0
     /* override the keyboard lock switch */
     c |= KBD_OVERRIDE_KBD_LOCK;
 #endif
 
+    /* 
+     * The keyboard may have been screwed up by the boot block.
+     * We may just be able to recover from error by testing the controller
+     * and the keyboard port. The controller command byte needs to be saved
+     * before this recovery operation, as some controllers seem to set 
+     * the command byte to particular values.
+     */
+    test_controller(sc_kbdc);
+    test_kbd_port(sc_kbdc);
+
     /* enable the keyboard port, but disable the keyboard intr. */
     if (!set_controller_command_byte(sc_kbdc,
-            KBD_KBD_CONTROL_BITS, 
+            KBD_KBD_CONTROL_BITS,
             KBD_ENABLE_KBD_PORT | KBD_DISABLE_KBD_INT)) {
 	/* CONTROLLER ERROR 
 	 * there is very little we can do...
 	 */
-	printf("sc%d: unable to set the command byte.\n", dev->id_unit);
+	printf("sc%d: unable to set the command byte.\n", unit);
 	goto fail;
      }
 
@@ -457,7 +584,7 @@ scprobe(struct isa_device *dev)
       * during the boot process.
       */
      codeset = -1;
-     if (dev->id_flags & XT_KEYBD)
+     if (flags & XT_KEYBD)
 	 /* the user says there is a XT keyboard */
 	 codeset = 1;
 #ifdef DETECT_XT_KEYBOARD
@@ -468,7 +595,7 @@ scprobe(struct isa_device *dev)
 	     codeset = read_kbd_data(sc_kbdc);
      }
      if (bootverbose)
-         printf("sc%d: keyboard scancode set %d\n", dev->id_unit, codeset);
+         printf("sc%d: keyboard scancode set %d\n", unit, codeset);
 #endif /* DETECT_XT_KEYBOARD */
  
      /* reset keyboard hardware */
@@ -489,7 +616,7 @@ scprobe(struct isa_device *dev)
 	 * the keyboard may still exist (see above). 
 	 */
         if (bootverbose)
-	   printf("sc%d: failed to reset the keyboard.\n", dev->id_unit);
+	   printf("sc%d: failed to reset the keyboard.\n", unit);
 	goto fail;
     }
 
@@ -508,7 +635,7 @@ scprobe(struct isa_device *dev)
 	     * The XT kbd isn't usable unless the proper scan code set
 	     * is selected. 
 	     */
-	    printf("sc%d: unable to set the XT keyboard mode.\n", dev->id_unit);
+	    printf("sc%d: unable to set the XT keyboard mode.\n", unit);
 	    goto fail;
 	}
     }
@@ -520,26 +647,25 @@ scprobe(struct isa_device *dev)
 	/* CONTROLLER ERROR 
 	 * This is serious; we are left with the disabled keyboard intr. 
 	 */
-	printf("sc%d: unable to enable the keyboard port and intr.\n", 
-	    dev->id_unit);
+	printf("sc%d: unable to enable the keyboard port and intr.\n", unit);
 	goto fail;
     }
 
 succeed: 
     kbdc_set_device_mask(sc_kbdc, m | KBD_KBD_CONTROL_BITS),
     kbdc_lock(sc_kbdc, FALSE);
-    return (IO_KBDSIZE);
+    return TRUE;
 
 fail:
     if (c != -1)
         /* try to restore the command byte as before, if possible */
         set_controller_command_byte(sc_kbdc, 0xff, c);
     kbdc_set_device_mask(sc_kbdc, 
-        (dev->id_flags & DETECT_KBD) ? m : m | KBD_KBD_CONTROL_BITS);
+        (flags & DETECT_KBD) ? m : m | KBD_KBD_CONTROL_BITS);
     kbdc_lock(sc_kbdc, FALSE);
-    return ((dev->id_flags & DETECT_KBD) ? 0 : IO_KBDSIZE);
-#endif
+    return FALSE;
 }
+#endif /* !PC98 */
 
 #if NAPM > 0
 static int
@@ -636,17 +762,29 @@ scattach(struct isa_device *dev)
 #ifdef PC98
 	printf(" <text mode>");
 #else
-    if (crtc_vga)
+    switch(crtc_type) {
+    case KD_VGA:
 	if (crtc_addr == MONO_BASE)
 	    printf("VGA mono");
 	else
 	    printf("VGA color");
-    else
+	break;
+    case KD_EGA:
 	if (crtc_addr == MONO_BASE)
-	    printf("MDA/hercules");
+	    printf("EGA mono");
 	else
-	    printf("CGA/EGA");
-#endif
+	    printf("EGA color");
+	break;
+    case KD_CGA:
+	printf("CGA");
+	break;
+    case KD_MONO:
+    case KD_HERCULES:
+    default:
+	printf("MDA/hercules");
+	break;
+    }
+#endif /* PC98 */
     printf(" <%d virtual consoles, flags=0x%x>\n", MAXCONS, flags);
 
 #if NAPM > 0
@@ -885,13 +1023,7 @@ scioctl(dev_t dev, int cmd, caddr_t data, int flag, struct proc *p)
 #ifdef PC98
 	*(int*)data = KD_PC98;
 #else
-	if (crtc_vga)
-	    *(int*)data = KD_VGA;
-	else
-	    if (crtc_addr == MONO_BASE)
-		*(int*)data = KD_MONO;
-	    else
-		*(int*)data = KD_CGA;
+	*(int *)data = crtc_type;
 #endif
 	return 0;
 
@@ -1702,6 +1834,13 @@ sccnprobe(struct consdev *cp)
 	return;
     }
 
+#ifndef PC98
+    if (!scvidprobe(dvp->id_unit, dvp->id_flags)) {
+	cp->cn_pri = CN_DEAD;
+	return;
+    }
+#endif
+
     /* initialize required fields */
     cp->cn_dev = makedev(CDEV_MAJOR, SC_CONSOLE);
     cp->cn_pri = CN_INTERNAL;
@@ -3150,37 +3289,15 @@ kanji_end:
 static void
 scinit(void)
 {
-#ifndef PC98
-    u_short volatile *cp;
-    u_short was;
-#endif
     u_int hw_cursor;
     u_int i;
 
     if (init_done != COLD)
 	return;
     init_done = WARM;
-    /*
-     * Finish defaulting crtc variables for a mono screen.  Crtat is a
-     * bogus common variable so that it can be shared with pcvt, so it
-     * can't be statically initialized.  XXX.
-     */
 #ifdef PC98
     Crtat = (u_short *)TEXT_VRAM;
     Atrat = (u_short *)TEXT_VRAM + ATTR_OFFSET;
-#else
-    Crtat = (u_short *)MONO_BUF;
-    /*
-     * If CGA memory seems to work, switch to color.
-     */
-    cp = (u_short *)CGA_BUF;
-    was = *cp;
-    *cp = (u_short) 0xA55A;
-    if (*cp == 0xA55A) {
-	Crtat = (u_short *)CGA_BUF;
-	crtc_addr = COLOR_BASE;
-    }
-    *cp = was;
 #endif
 
 #ifdef PC98
@@ -3237,28 +3354,9 @@ scinit(void)
     outb(crtc_addr + 1, 0xff);
     outb(crtc_addr, 15);
     outb(crtc_addr + 1, 0xff);
+#endif /* PC98 */
 
-    /* is this a VGA or higher ? */
-    outb(crtc_addr, 7);
-    if (inb(crtc_addr) == 7) {
-	u_long  pa;
-	u_long  segoff;
-
-	crtc_vga = TRUE;
-	read_vgaregs(vgaregs);
-
-	/* Get the BIOS video mode pointer */
-	segoff = *(u_long *)pa_to_va(0x4a8);
-	pa = (((segoff & 0xffff0000) >> 12) + (segoff & 0xffff));
-	if (ISMAPPED(pa, sizeof(u_long))) {
-	    segoff = *(u_long *)pa_to_va(pa);
-	    pa = (((segoff & 0xffff0000) >> 12) + (segoff & 0xffff));
-	    if (ISMAPPED(pa, 64))
-		video_mode_ptr = (char *)pa_to_va(pa);
-	}
-    }
-#endif /* IBM */
-
+    /* set up the first console */
     current_default = &user_default;
     console[0] = &main_console;
     init_scp(console[0]);