summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorwilko <wilko@FreeBSD.org>2001-04-29 13:27:26 +0000
committerwilko <wilko@FreeBSD.org>2001-04-29 13:27:26 +0000
commite2640b895bd552492b43cfb1ef684f73e73b1248 (patch)
treed8b1e8cfdd6efc795c60f98097e2df4a7a421df3
parent8e3fa89968253688c69354328c0c8c9aa765ee6b (diff)
downloadFreeBSD-src-e2640b895bd552492b43cfb1ef684f73e73b1248.zip
FreeBSD-src-e2640b895bd552492b43cfb1ef684f73e73b1248.tar.gz
Remove most of the CPU: sections, and reflect SMP capability of
FreeBSD/alpha.
-rw-r--r--release/texts/alpha/HARDWARE.TXT24
1 files changed, 0 insertions, 24 deletions
diff --git a/release/texts/alpha/HARDWARE.TXT b/release/texts/alpha/HARDWARE.TXT
index 9029af0..ddc49f4 100644
--- a/release/texts/alpha/HARDWARE.TXT
+++ b/release/texts/alpha/HARDWARE.TXT
@@ -1242,10 +1242,6 @@ Starting with SRM firmware version 5.9 you can boot from Adaptec 2940-series
adapters in addition to the usual set of Qlogic and Symbios/NCR adapters.
This unfortunately does not include the embedded Adaptec SCSI chips.
-CPU:
-DS20 can have 2 CPUs installed. FreeBSD/alpha is not currently SMP-capable
-and will only use the primary CPU.
-
Memory:
If you are using banks of DIMMs of different sizes the biggest DIMMs should
be installed in the DIMM slots marked '0' on the mainboard. The DIMM slots
@@ -1288,10 +1284,6 @@ Features:
Memory:
A maximum of 2Gb memory is supported by FreeBSD.
-CPU:
-DP264 can have 2 CPUs installed. FreeBSD/alpha is not currently SMP-capable
-and will only use the primary CPU.
-
Embedded SCSI:
The on-board Adaptec is not bootable but works with FreeBSD 4.0 and later
as a datadisk-only SCSI bus.
@@ -1338,8 +1330,6 @@ CPU:
The CPUs spec-ed as 200 MHz are in reality running at 190 MHz. Maximum
number of CPUs is 4. All CPUs must be of the same type/speed.
-Currently FreeBSD only uses one CPU in a multiprocessor machine.
-
If any of the processors are ever marked as failed, they will
remain marked as failed even after they have been replaced (or reseated)
until you issue the command 'clear_error all' on the SRM console and
@@ -1460,9 +1450,6 @@ Features:
- 1 parallel port
- PS/2 style keyboard & mouse port
-CPU:
-Rawhide is a multiprocessor machine. Currently FreeBSD only uses one CPU.
-
Memory:
Rawhide uses a maximum of 8 RAM modules. These modules are used in pairs
and supply 72 bits to the bus (this includes ECC bits). Memory can be EDO
@@ -1522,9 +1509,6 @@ Features:
- 1 parallel port
- PS/2 style keyboard & mouse port
-CPU:
-AS1200 is a multiprocessor-capable machine. Currently FreeBSD only uses one CPU.
-
Memory:
AS1200 uses 2 memory daughter cards. On each of these cards are 8 DIMM slots.
DIMMs must be installed in pairs. The maximum memory size is 4 Gbytes.
@@ -1590,10 +1574,6 @@ Memory:
FreeBSD supports (and has been tested with) up to 2 Gbytes of memory on
TurboLaser.
-CPU:
-TurboLaser is very much a multiprocessor machine. Currently FreeBSD only
-uses one CPU.
-
Expansion:
Only PCI expansion is supported on FreeBSD. XMI or Futurebus+ (which
are AS8400 only) are both unsupported.
@@ -1797,10 +1777,6 @@ Features:
- embedded Symbios 53C1000 Ultra160 SCSI controller
- expansion: 2 64 bit PCI slots (2/3 length)
-CPU:
-The CS20 can have 2 CPUs installed. FreeBSD/alpha is not currently SMP-capable
-and will only use the primary CPU.
-
Console:
SRM console code comes standard with the CS20. The SRM lives in 2Mbytes of
flash ROM.
OpenPOWER on IntegriCloud