Remove target mode definitions (they'll come back later in

a different file).

1 files changed, 0 insertions, 376 deletions

diff --git a/sys/dev/isp/ispmbox.h b/sys/dev/isp/ispmbox.h
index c4efab2..c86c1e1 100644
--- a/sys/dev/isp/ispmbox.h
+++ b/sys/dev/isp/ispmbox.h
@@ -617,380 +617,4 @@ typedef struct {
 #define	SNS_GAN_RESP_SIZE	608	/* Maximum response size (bytes) */
 #define	SNS_GP3_RESP_SIZE	532	/* XXX: For 128 ports */
 
-/*
- * Target Mode Structures
- */
-#define TGTSVALID	0x80	/* scsi status & sense data valid */
-#define	SUGGSENSELEN	18
-
-/*
- * Structure for Enable Lun and Modify Lun queue entries
- */
-typedef struct {
-	isphdr_t		le_header;
-	u_int32_t		le_reserved2;
-	u_int8_t		le_lun;
-	u_int8_t		le_rsvd;
-	u_int8_t		le_ops;		/* Modify LUN only */
-	u_int8_t		le_tgt;		/* Not for FC */
-	u_int32_t		le_flags;	/* Not for FC */
-	u_int8_t		le_status;
-	u_int8_t		le_rsvd2;
-	u_int8_t		le_cmd_count;
-	u_int8_t		le_in_count;
-	u_int8_t		le_cdb6len;	/* Not for FC */
-	u_int8_t		le_cdb7len;	/* Not for FC */
-	u_int16_t		le_timeout;
-	u_int16_t		le_reserved[20];
-} lun_entry_t;
-
-/*
- * le_flags values
- */
-#define LUN_TQAE	0x00000001	/* Tagged Queue Action Enable */
-#define LUN_DSSM	0x01000000	/* Disable Sending SDP Message */
-#define LUN_DM		0x40000000	/* Disconnects Mandatory */
-
-/*
- * le_ops values
- */
-#define LUN_CCINCR	0x01	/* increment command count */
-#define LUN_CCDECR	0x02	/* decrement command count */
-#define LUN_ININCR	0x40	/* increment immed. notify count */
-#define LUN_INDECR	0x80	/* decrement immed. notify count */
-
-/*
- * le_status values
- */
-#define LUN_ERR		0x04	/* request completed with error */
-#define LUN_INVAL	0x06	/* invalid request */
-#define LUN_NOCAP	0x16	/* can't provide requested capability */
-#define LUN_ENABLED	0x3E	/* LUN already enabled */
-
-/*
- * Immediate Notify Entry structure
- */
-#define IN_MSGLEN	8	/* 8 bytes */
-#define IN_RSVDLEN	8	/* 8 words */
-typedef struct {
-	isphdr_t	in_header;
-	u_int32_t	in_reserved2;
-	u_int8_t	in_lun;			/* lun */
-	u_int8_t	in_iid;			/* initiator */
-	u_int8_t	in_rsvd;
-	u_int8_t	in_tgt;			/* target */
-	u_int32_t	in_flags;
-	u_int8_t	in_status;
-	u_int8_t	in_rsvd2;
-	u_int8_t	in_tag_val;		/* tag value */
-	u_int8_t	in_tag_type;		/* tag type */
-	u_int16_t	in_seqid;		/* sequence id */
-	u_int8_t	in_msg[IN_MSGLEN];	/* SCSI message bytes */
-	u_int16_t	in_reserved[IN_RSVDLEN];
-	u_int8_t	in_sense[SUGGSENSELEN];	/* suggested sense data */
-} in_entry_t;
-
-typedef struct {
-	isphdr_t	in_header;
-	u_int32_t	in_reserved2;
-	u_int8_t	in_lun;		/* lun */
-	u_int8_t	in_iid;		/* initiator */
-	u_int16_t	in_rsvd;
-	u_int32_t	in_rsvd2;
-	u_int16_t	in_status;
-	u_int16_t	in_task_flags;
-	u_int16_t	in_seqid;	/* sequence id */
-} in_fcentry_t;
-
-/*
- * Values for the in_status field
- */
-#define IN_NO_RCAP	0x16	/* requested capability not available */
-#define IN_IDE_RECEIVED	0x33	/* Initiator Detected Error msg received */
-#define IN_RSRC_UNAVAIL	0x34	/* resource unavailable */
-#define IN_MSG_RECEIVED	0x36	/* SCSI message received */
-#define	IN_PORT_LOGOUT	0x29	/* port has logged out (FC) */
-#define	IN_ABORT_TASK	0x20	/* task named in RX_ID is being aborted (FC) */
-
-/*
- * Notify Acknowledge Entry structure
- */
-#define NA_RSVDLEN	22
-typedef struct {
-	isphdr_t	na_header;
-	u_int32_t	na_reserved2;
-	u_int8_t	na_lun;		/* lun */
-	u_int8_t	na_iid;		/* initiator */
-	u_int8_t	na_rsvd;
-	u_int8_t	na_tgt;		/* target */
-	u_int32_t	na_flags;
-	u_int8_t	na_status;
-	u_int8_t	na_event;
-	u_int16_t	na_seqid;	/* sequence id */
-	u_int16_t	na_reserved[NA_RSVDLEN];
-} na_entry_t;
-
-/*
- * Value for the na_event field
- */
-#define NA_RST_CLRD	0x80	/* Clear an async event notification */
-
-#define	NA2_RSVDLEN	21
-typedef struct {
-	isphdr_t	na_header;
-	u_int32_t	na_reserved2;
-	u_int8_t	na_lun;		/* lun */
-	u_int8_t	na_iid;		/* initiator */
-	u_int16_t	na_rsvd;
-	u_int16_t	na_flags;
-	u_int16_t	na_rsvd2;
-	u_int16_t	na_status;
-	u_int16_t	na_task_flags;
-	u_int16_t	na_seqid;	/* sequence id */
-	u_int16_t	na_reserved[NA2_RSVDLEN];
-} na_fcentry_t;
-#define	NAFC_RST_CLRD	0x40
-
-/*
- * Value for the na_event field
- */
-#define NA_RST_CLRD	0x80	/* Clear an async event notification */
-/*
- * Accept Target I/O Entry structure
- */
-#define ATIO_CDBLEN	26
-
-typedef struct {
-	isphdr_t	at_header;
-	u_int32_t	at_reserved2;
-	u_int8_t	at_lun;			/* lun */
-	u_int8_t	at_iid;			/* initiator */
-	u_int8_t	at_cdblen;	 	/* cdb length */
-	u_int8_t	at_tgt;			/* target */
-	u_int32_t	at_flags;	
-	u_int8_t	at_status;		/* firmware status */
-	u_int8_t	at_scsi_status;		/* scsi status */
-	u_int8_t	at_tag_val;		/* tag value */
-	u_int8_t	at_tag_type;		/* tag type */
-	u_int8_t	at_cdb[ATIO_CDBLEN];	/* received CDB */
-	u_int8_t	at_sense[SUGGSENSELEN];	/* suggested sense data */
-} at_entry_t;
-
-/*
- * at_flags values
- */
-#define AT_NODISC	0x00008000	/* disconnect disabled */
-#define AT_TQAE		0x00000001	/* Tagged Queue Action enabled */
-
-/*
- * at_status values
- */
-#define AT_PATH_INVALID	0x07	/* ATIO sent to firmware for disabled lun */
-#define AT_PHASE_ERROR	0x14	/* Bus phase sequence error */
-#define AT_NOCAP	0x16	/* Requested capability not available */
-#define AT_BDR_MSG	0x17	/* Bus Device Reset msg received */
-#define AT_CDB		0x3D	/* CDB received */
-
-/*
- * Accept Target I/O Entry structure, Type 2
- */
-#define ATIO2_CDBLEN	16
-
-typedef struct {
-	isphdr_t	at_header;	
-	u_int32_t	at_reserved2;
-	u_int8_t	at_lun;			/* lun */
-	u_int8_t	at_iid;			/* initiator */
-	u_int16_t	at_rxid;	 	/* response ID */
-	u_int16_t	at_flags;
-	u_int16_t	at_status;		/* firmware status */
-	u_int8_t	at_reserved1;
-	u_int8_t	at_taskcodes;
-	u_int8_t	at_taskflags;
-	u_int8_t	at_execodes;
-	u_int8_t	at_cdb[ATIO2_CDBLEN];	/* received CDB */
-	u_int32_t	at_datalen;		/* allocated data len */
-	u_int16_t	at_scclun;
-	u_int16_t	at_reserved3;
-	u_int16_t	at_scsi_status;
-	u_int8_t	at_sense[SUGGSENSELEN];	/* suggested sense data */
-} at2_entry_t;
-
-#define	ATIO2_TC_ATTR_MASK	0x7
-#define	ATIO2_TC_ATTR_SIMPLEQ	0
-#define	ATIO2_TC_ATTR_HEADOFQ	1
-#define	ATIO2_TC_ATTR_ORDERED	2
-#define	ATIO2_TC_ATTR_ACAQ	4
-#define	ATIO2_TC_ATTR_UNTAGGED	5
-#define	TC2TT(code)	\
-	(((code) == ATIO2_TC_ATTR_SIMPLEQ)? 0x20 : \
-	(((code) == ATIO2_TC_ATTR_HEADOFQ)? 0x21 : \
-	(((code) == ATIO2_TC_ATTR_ORDERED)? 0x22 : \
-	(((code) == ATIO2_TC_ATTR_ACAQ)? 0x24 : 0))))
-	     
-
-/*
- * Continue Target I/O Entry structure
- * Request from driver. The response from the
- * ISP firmware is the same except that the last 18
- * bytes are overwritten by suggested sense data if
- * the 'autosense valid' bit is set in the status byte.
- */
-typedef struct {
-	isphdr_t	ct_header;
-	u_int32_t	ct_reserved;
-	u_int8_t	ct_lun;		/* lun */
-	u_int8_t	ct_iid;		/* initiator id */
-	u_int8_t	ct_rsvd;
-	u_int8_t	ct_tgt;		/* our target id */
-	u_int32_t	ct_flags;
-	u_int8_t 	ct_status;	/* isp status */
-	u_int8_t 	ct_scsi_status;	/* scsi status */
-	u_int8_t 	ct_tag_val;	/* tag value */
-	u_int8_t 	ct_tag_type;	/* tag type */
-	u_int32_t	ct_xfrlen;	/* transfer length */
-	u_int32_t	ct_resid;	/* residual length */
-	u_int16_t	ct_timeout;
-	u_int16_t	ct_seg_count;
-	ispds_t		ct_dataseg[ISP_RQDSEG];
-} ct_entry_t;
-
-/*
- * ct_flags values
- */
-#define CT_TQAE		0x00000001	/* Tagged Queue Action enable */
-#define CT_DATA_IN	0x00000040	/* Data direction */
-#define CT_DATA_OUT	0x00000080	/* Data direction */
-#define CT_NO_DATA	0x000000C0	/* Data direction */
-#define CT_DATAMASK	0x000000C0	/* Data direction */
-#define CT_NODISC	0x00008000	/* Disconnects disabled */
-#define CT_DSDP		0x01000000	/* Disable Save Data Pointers */
-#define CT_SENDRDP	0x04000000	/* Send Restore Pointers msg */
-#define CT_SENDSTATUS	0x80000000	/* Send SCSI status byte */
-
-/*
- * ct_status values
- * - set by the firmware when it returns the CTIO
- */
-#define CT_OK		0x01	/* completed without error */
-#define CT_ABORTED	0x02	/* aborted by host */
-#define CT_ERR		0x04	/* see sense data for error */
-#define CT_INVAL	0x06	/* request for disabled lun */
-#define CT_NOPATH	0x07	/* invalid ITL nexus */
-#define	CT_INVRXID	0x08	/* (FC only) Invalid RX_ID */
-#define CT_RSELTMO	0x0A	/* reselection timeout after 2 tries */
-#define CT_TIMEOUT	0x0B	/* timed out */
-#define CT_RESET	0x0E	/* SCSI Bus Reset occurred */
-#define CT_PHASE_ERROR	0x14	/* Bus phase sequence error */
-#define CT_BDR_MSG	0x17	/* Bus Device Reset msg received */
-#define CT_TERMINATED	0x19	/* due to Terminate Transfer mbox cmd */
-#define	CT_LOGOUT	0x29	/* port logout not acknowledged yet */
-#define CT_NOACK	0x35	/* Outstanding Immed. Notify. entry */
-
-/*
- * When the firmware returns a CTIO entry, it may overwrite the last
- * part of the structure with sense data. This starts at offset 0x2E
- * into the entry, which is in the middle of ct_dataseg[1]. Rather
- * than define a new struct for this, I'm just using the sense data
- * offset.
- */
-#define CTIO_SENSE_OFFSET	0x2E
-
-/*
- * Entry length in u_longs. All entries are the same size so
- * any one will do as the numerator.
- */
-#define UINT32_ENTRY_SIZE	(sizeof(at_entry_t)/sizeof(u_int32_t))
-
-/*
- * QLA2100 CTIO (type 2) entry
- */
-#define	MAXRESPLEN	26
-typedef struct {
-	isphdr_t	ct_header;
-	u_int32_t	ct_reserved;
-	u_int8_t	ct_lun;		/* lun */
-	u_int8_t	ct_iid;		/* initiator id */
-	u_int16_t	ct_rxid;	 /* response ID */
-	u_int16_t	ct_flags;
-	u_int16_t 	ct_status;	/* isp status */
-	u_int16_t	ct_timeout;
-	u_int16_t	ct_seg_count;
-	u_int32_t	ct_reloff;	/* relative offset */
-	u_int32_t	ct_resid;	/* residual length */
-	union {
-		/*
-		 * The three different modes that the target driver
-		 * can set the CTIO2 up as.
-		 *
-		 * The first is for sending FCP_DATA_IUs as well as
-		 * (optionally) sending a terminal SCSI status FCP_RSP_IU.
-		 *
-		 * The second is for sending SCSI sense data in an FCP_RSP_IU.
-		 * Note that no FCP_DATA_IUs will be sent.
-		 *
-		 * The third is for sending FCP_RSP_IUs as built specifically
-		 * in system memory as located by the isp_dataseg.
-		 */
-		struct {
-			u_int32_t _reserved;
-			u_int16_t _reserved2;
-			u_int16_t ct_scsi_status;
-			u_int32_t ct_xfrlen;
-			ispds_t   ct_dataseg[ISP_RQDSEG_T2];
-		} m0;
-		struct {
-			u_int16_t _reserved;
-			u_int16_t _reserved2;
-			u_int16_t ct_senselen;
-			u_int16_t ct_scsi_status;
-			u_int16_t ct_resplen;
-			u_int8_t  ct_resp[MAXRESPLEN];
-		} m1;
-		struct {
-			u_int32_t _reserved;
-			u_int16_t _reserved2;
-			u_int16_t _reserved3;
-			u_int32_t ct_datalen;
-			ispds_t ct_fcp_rsp_iudata;
-		} m2;
-		/*
-		 * CTIO2 returned from F/W...
-		 */
-		struct {
-			u_int32_t _reserved[4];
-			u_int16_t ct_scsi_status;
-			u_int8_t  ct_sense[SUGGSENSELEN];
-		} fw;
-	} rsp;
-} ct2_entry_t;
-/*
- * ct_flags values for CTIO2
- */
-#define	CT2_FLAG_MMASK	0x0003
-#define	CT2_FLAG_MODE0	0x0000
-#define	CT2_FLAG_MODE1	0x0001
-#define	CT2_FLAG_MODE2	0x0002
-#define CT2_DATA_IN	CT_DATA_IN
-#define CT2_DATA_OUT	CT_DATA_OUT
-#define CT2_NO_DATA	CT_NO_DATA
-#define CT2_DATAMASK	CT_DATA_MASK
-#define	CT2_CCINCR	0x0100
-#define	CT2_FASTPOST	0x0200
-#define CT2_SENDSTATUS	0x8000
-
-/*
- * ct_status values are (mostly) the same as that for ct_entry.
- */
-
-/*
- * ct_scsi_status values- the low 8 bits are the normal SCSI status
- * we know and love. The upper 8 bits are validity markers for FCP_RSP_IU
- * fields.
- */
-#define	CT2_RSPLEN_VALID	0x0100
-#define	CT2_SNSLEN_VALID	0x0200
-#define	CT2_DATA_OVER		0x0400
-#define	CT2_DATA_UNDER		0x0800
-
 #endif	/* _ISPMBOX_H */