Remove burn bridges code that saved/restored the pci config registers

that are now handled in the pci bus layer.  They are no longer
necessary.

15 files changed, 6 insertions, 473 deletions

diff --git a/sys/dev/dc/if_dc.c b/sys/dev/dc/if_dc.c
index 24cf24a..b049ccc 100644
--- a/sys/dev/dc/if_dc.c
+++ b/sys/dev/dc/if_dc.c
@@ -226,9 +226,6 @@ static int dc_attach		(device_t);
 static int dc_detach		(device_t);
 static int dc_suspend		(device_t);
 static int dc_resume		(device_t);
-#ifndef BURN_BRIDGES
-static void dc_acpi		(device_t);
-#endif
 static struct dc_type *dc_devtype	(device_t);
 static int dc_newbuf		(struct dc_softc *, int, int);
 static int dc_encap		(struct dc_softc *, struct mbuf **);
@@ -1630,35 +1627,6 @@ dc_probe(device_t dev)
 	return (ENXIO);
 }
 
-#ifndef BURN_BRIDGES
-static void
-dc_acpi(device_t dev)
-{
-	int unit;
-	u_int32_t iobase, membase, irq;
-
-	unit = device_get_unit(dev);
-
-	if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
-		/* Save important PCI config data. */
-		iobase = pci_read_config(dev, DC_PCI_CFBIO, 4);
-		membase = pci_read_config(dev, DC_PCI_CFBMA, 4);
-		irq = pci_read_config(dev, DC_PCI_CFIT, 4);
-
-		/* Reset the power state. */
-		printf("dc%d: chip is in D%d power mode "
-		    "-- setting to D0\n", unit,
-		    pci_get_powerstate(dev));
-		pci_set_powerstate(dev, PCI_POWERSTATE_D0);
-
-		/* Restore PCI config data. */
-		pci_write_config(dev, DC_PCI_CFBIO, iobase, 4);
-		pci_write_config(dev, DC_PCI_CFBMA, membase, 4);
-		pci_write_config(dev, DC_PCI_CFIT, irq, 4);
-	}
-}
-#endif
-
 static void
 dc_apply_fixup(struct dc_softc *sc, int media)
 {
@@ -1876,12 +1844,7 @@ dc_attach(device_t dev)
 
 	mtx_init(&sc->dc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
 	    MTX_DEF | MTX_RECURSE);
-#ifndef BURN_BRIDGES
-	/*
-	 * Handle power management nonsense.
-	 */
-	dc_acpi(dev);
-#endif
+
 	/*
 	 * Map control/status registers.
 	 */
@@ -3798,21 +3761,12 @@ static int
 dc_suspend(device_t dev)
 {
 	struct dc_softc *sc;
-	int i, s;
+	int s;
 
 	s = splimp();
 
 	sc = device_get_softc(dev);
-
 	dc_stop(sc);
-
-	for (i = 0; i < 5; i++)
-		sc->saved_maps[i] = pci_read_config(dev, PCIR_BAR(i), 4);
-	sc->saved_biosaddr = pci_read_config(dev, PCIR_BIOS, 4);
-	sc->saved_intline = pci_read_config(dev, PCIR_INTLINE, 1);
-	sc->saved_cachelnsz = pci_read_config(dev, PCIR_CACHELNSZ, 1);
-	sc->saved_lattimer = pci_read_config(dev, PCIR_LATTIMER, 1);
-
 	sc->suspended = 1;
 
 	splx(s);
@@ -3829,26 +3783,12 @@ dc_resume(device_t dev)
 {
 	struct dc_softc *sc;
 	struct ifnet *ifp;
-	int i, s;
+	int s;
 
 	s = splimp();
 
 	sc = device_get_softc(dev);
 	ifp = &sc->arpcom.ac_if;
-#ifndef BURN_BRIDGES
-	dc_acpi(dev);
-#endif
-	/* better way to do this? */
-	for (i = 0; i < 5; i++)
-		pci_write_config(dev, PCIR_BAR(i), sc->saved_maps[i], 4);
-	pci_write_config(dev, PCIR_BIOS, sc->saved_biosaddr, 4);
-	pci_write_config(dev, PCIR_INTLINE, sc->saved_intline, 1);
-	pci_write_config(dev, PCIR_CACHELNSZ, sc->saved_cachelnsz, 1);
-	pci_write_config(dev, PCIR_LATTIMER, sc->saved_lattimer, 1);
-
-	/* reenable busmastering */
-	pci_enable_busmaster(dev);
-	pci_enable_io(dev, DC_RES);
 
 	/* reinitialize interface if necessary */
 	if (ifp->if_flags & IFF_UP)
diff --git a/sys/dev/sf/if_sf.c b/sys/dev/sf/if_sf.c
index 4019e61..71d9286 100644
--- a/sys/dev/sf/if_sf.c
+++ b/sys/dev/sf/if_sf.c
@@ -649,30 +649,6 @@ sf_attach(dev)
 
 	mtx_init(&sc->sf_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
 	    MTX_DEF | MTX_RECURSE);
-#ifndef BURN_BRIDGES
-	/*
-	 * Handle power management nonsense.
-	 */
-	if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
-		u_int32_t		iobase, membase, irq;
-
-		/* Save important PCI config data. */
-		iobase = pci_read_config(dev, SF_PCI_LOIO, 4);
-		membase = pci_read_config(dev, SF_PCI_LOMEM, 4);
-		irq = pci_read_config(dev, SF_PCI_INTLINE, 4);
-
-		/* Reset the power state. */
-		printf("sf%d: chip is in D%d power mode "
-		    "-- setting to D0\n", unit,
-		    pci_get_powerstate(dev));
-		pci_set_powerstate(dev, PCI_POWERSTATE_D0);
-
-		/* Restore PCI config data. */
-		pci_write_config(dev, SF_PCI_LOIO, iobase, 4);
-		pci_write_config(dev, SF_PCI_LOMEM, membase, 4);
-		pci_write_config(dev, SF_PCI_INTLINE, irq, 4);
-	}
-#endif
 	/*
 	 * Map control/status registers.
 	 */
diff --git a/sys/dev/sk/if_sk.c b/sys/dev/sk/if_sk.c
index 3fe70eb..2db4f7c 100644
--- a/sys/dev/sk/if_sk.c
+++ b/sys/dev/sk/if_sk.c
@@ -1498,30 +1498,6 @@ skc_attach(dev)
 
 	mtx_init(&sc->sk_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
 	    MTX_DEF | MTX_RECURSE);
-#ifndef BURN_BRIDGES
-	/*
-	 * Handle power management nonsense.
-	 */
-	if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
-		u_int32_t		iobase, membase, irq;
-
-		/* Save important PCI config data. */
-		iobase = pci_read_config(dev, SK_PCI_LOIO, 4);
-		membase = pci_read_config(dev, SK_PCI_LOMEM, 4);
-		irq = pci_read_config(dev, SK_PCI_INTLINE, 4);
-
-		/* Reset the power state. */
-		printf("skc%d: chip is in D%d power mode "
-		    "-- setting to D0\n", unit,
-		    pci_get_powerstate(dev));
-		pci_set_powerstate(dev, PCI_POWERSTATE_D0);
-
-		/* Restore PCI config data. */
-		pci_write_config(dev, SK_PCI_LOIO, iobase, 4);
-		pci_write_config(dev, SK_PCI_LOMEM, membase, 4);
-		pci_write_config(dev, SK_PCI_INTLINE, irq, 4);
-	}
-#endif
 	/*
 	 * Map control/status registers.
 	 */
diff --git a/sys/dev/vr/if_vr.c b/sys/dev/vr/if_vr.c
index 8604ff2..900eda9 100644
--- a/sys/dev/vr/if_vr.c
+++ b/sys/dev/vr/if_vr.c
@@ -715,30 +715,6 @@ vr_attach(dev)
 
 	mtx_init(&sc->vr_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
 	    MTX_DEF | MTX_RECURSE);
-#ifndef BURN_BRIDGES
-	/*
-	 * Handle power management nonsense.
-	 */
-	if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
-		u_int32_t		iobase, membase, irq;
-
-		/* Save important PCI config data. */
-		iobase = pci_read_config(dev, VR_PCI_LOIO, 4);
-		membase = pci_read_config(dev, VR_PCI_LOMEM, 4);
-		irq = pci_read_config(dev, VR_PCI_INTLINE, 4);
-
-		/* Reset the power state. */
-		printf("vr%d: chip is in D%d power mode "
-		    "-- setting to D0\n", unit,
-		    pci_get_powerstate(dev));
-		pci_set_powerstate(dev, PCI_POWERSTATE_D0);
-
-			/* Restore PCI config data. */
-		pci_write_config(dev, VR_PCI_LOIO, iobase, 4);
-		pci_write_config(dev, VR_PCI_LOMEM, membase, 4);
-		pci_write_config(dev, VR_PCI_INTLINE, irq, 4);
-	}
-#endif
 	/*
 	 * Map control/status registers.
 	 */
diff --git a/sys/pci/if_dc.c b/sys/pci/if_dc.c
index 24cf24a..b049ccc 100644
--- a/sys/pci/if_dc.c
+++ b/sys/pci/if_dc.c
@@ -226,9 +226,6 @@ static int dc_attach		(device_t);
 static int dc_detach		(device_t);
 static int dc_suspend		(device_t);
 static int dc_resume		(device_t);
-#ifndef BURN_BRIDGES
-static void dc_acpi		(device_t);
-#endif
 static struct dc_type *dc_devtype	(device_t);
 static int dc_newbuf		(struct dc_softc *, int, int);
 static int dc_encap		(struct dc_softc *, struct mbuf **);
@@ -1630,35 +1627,6 @@ dc_probe(device_t dev)
 	return (ENXIO);
 }
 
-#ifndef BURN_BRIDGES
-static void
-dc_acpi(device_t dev)
-{
-	int unit;
-	u_int32_t iobase, membase, irq;
-
-	unit = device_get_unit(dev);
-
-	if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
-		/* Save important PCI config data. */
-		iobase = pci_read_config(dev, DC_PCI_CFBIO, 4);
-		membase = pci_read_config(dev, DC_PCI_CFBMA, 4);
-		irq = pci_read_config(dev, DC_PCI_CFIT, 4);
-
-		/* Reset the power state. */
-		printf("dc%d: chip is in D%d power mode "
-		    "-- setting to D0\n", unit,
-		    pci_get_powerstate(dev));
-		pci_set_powerstate(dev, PCI_POWERSTATE_D0);
-
-		/* Restore PCI config data. */
-		pci_write_config(dev, DC_PCI_CFBIO, iobase, 4);
-		pci_write_config(dev, DC_PCI_CFBMA, membase, 4);
-		pci_write_config(dev, DC_PCI_CFIT, irq, 4);
-	}
-}
-#endif
-
 static void
 dc_apply_fixup(struct dc_softc *sc, int media)
 {
@@ -1876,12 +1844,7 @@ dc_attach(device_t dev)
 
 	mtx_init(&sc->dc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
 	    MTX_DEF | MTX_RECURSE);
-#ifndef BURN_BRIDGES
-	/*
-	 * Handle power management nonsense.
-	 */
-	dc_acpi(dev);
-#endif
+
 	/*
 	 * Map control/status registers.
 	 */
@@ -3798,21 +3761,12 @@ static int
 dc_suspend(device_t dev)
 {
 	struct dc_softc *sc;
-	int i, s;
+	int s;
 
 	s = splimp();
 
 	sc = device_get_softc(dev);
-
 	dc_stop(sc);
-
-	for (i = 0; i < 5; i++)
-		sc->saved_maps[i] = pci_read_config(dev, PCIR_BAR(i), 4);
-	sc->saved_biosaddr = pci_read_config(dev, PCIR_BIOS, 4);
-	sc->saved_intline = pci_read_config(dev, PCIR_INTLINE, 1);
-	sc->saved_cachelnsz = pci_read_config(dev, PCIR_CACHELNSZ, 1);
-	sc->saved_lattimer = pci_read_config(dev, PCIR_LATTIMER, 1);
-
 	sc->suspended = 1;
 
 	splx(s);
@@ -3829,26 +3783,12 @@ dc_resume(device_t dev)
 {
 	struct dc_softc *sc;
 	struct ifnet *ifp;
-	int i, s;
+	int s;
 
 	s = splimp();
 
 	sc = device_get_softc(dev);
 	ifp = &sc->arpcom.ac_if;
-#ifndef BURN_BRIDGES
-	dc_acpi(dev);
-#endif
-	/* better way to do this? */
-	for (i = 0; i < 5; i++)
-		pci_write_config(dev, PCIR_BAR(i), sc->saved_maps[i], 4);
-	pci_write_config(dev, PCIR_BIOS, sc->saved_biosaddr, 4);
-	pci_write_config(dev, PCIR_INTLINE, sc->saved_intline, 1);
-	pci_write_config(dev, PCIR_CACHELNSZ, sc->saved_cachelnsz, 1);
-	pci_write_config(dev, PCIR_LATTIMER, sc->saved_lattimer, 1);
-
-	/* reenable busmastering */
-	pci_enable_busmaster(dev);
-	pci_enable_io(dev, DC_RES);
 
 	/* reinitialize interface if necessary */
 	if (ifp->if_flags & IFF_UP)
diff --git a/sys/pci/if_pcn.c b/sys/pci/if_pcn.c
index daf6076..976b330 100644
--- a/sys/pci/if_pcn.c
+++ b/sys/pci/if_pcn.c
@@ -497,30 +497,6 @@ pcn_attach(dev)
 	/* Initialize our mutex. */
 	mtx_init(&sc->pcn_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
 	    MTX_DEF | MTX_RECURSE);
-#ifndef BURN_BRIDGES
-	/*
-	 * Handle power management nonsense.
-	 */
-	if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
-		u_int32_t		iobase, membase, irq;
-
-		/* Save important PCI config data. */
-		iobase = pci_read_config(dev, PCN_PCI_LOIO, 4);
-		membase = pci_read_config(dev, PCN_PCI_LOMEM, 4);
-		irq = pci_read_config(dev, PCN_PCI_INTLINE, 4);
-
-		/* Reset the power state. */
-		printf("pcn%d: chip is in D%d power mode "
-		    "-- setting to D0\n", unit,
-		    pci_get_powerstate(dev));
-		pci_set_powerstate(dev, PCI_POWERSTATE_D0);
-
-		/* Restore PCI config data. */
-		pci_write_config(dev, PCN_PCI_LOIO, iobase, 4);
-		pci_write_config(dev, PCN_PCI_LOMEM, membase, 4);
-		pci_write_config(dev, PCN_PCI_INTLINE, irq, 4);
-	}
-#endif
 	/*
 	 * Map control/status registers.
 	 */
diff --git a/sys/pci/if_rl.c b/sys/pci/if_rl.c
index a1ec964..262b6a1 100644
--- a/sys/pci/if_rl.c
+++ b/sys/pci/if_rl.c
@@ -889,32 +889,6 @@ rl_attach(dev)
 
 	mtx_init(&sc->rl_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
 	    MTX_DEF | MTX_RECURSE);
-#ifndef BURN_BRIDGES
-	/*
-	 * Handle power management nonsense.
-	 */
-
-	if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
-		u_int32_t		iobase, membase, irq;
-
-		/* Save important PCI config data. */
-		iobase = pci_read_config(dev, RL_PCI_LOIO, 4);
-		membase = pci_read_config(dev, RL_PCI_LOMEM, 4);
-		irq = pci_read_config(dev, RL_PCI_INTLINE, 4);
-
-		/* Reset the power state. */
-		printf("rl%d: chip is is in D%d power mode "
-		    "-- setting to D0\n", unit,
-		    pci_get_powerstate(dev));
-
-		pci_set_powerstate(dev, PCI_POWERSTATE_D0);
-
-		/* Restore PCI config data. */
-		pci_write_config(dev, RL_PCI_LOIO, iobase, 4);
-		pci_write_config(dev, RL_PCI_LOMEM, membase, 4);
-		pci_write_config(dev, RL_PCI_INTLINE, irq, 4);
-	}
-#endif
 	/*
 	 * Map control/status registers.
 	 */
@@ -1890,24 +1864,10 @@ static int
 rl_suspend(dev)
 	device_t		dev;
 {
-#ifndef BURN_BRIDGES
-	register int		i;
-#endif
 	struct rl_softc		*sc;
 
 	sc = device_get_softc(dev);
-
 	rl_stop(sc);
-
-#ifndef BURN_BRIDGES
-	for (i = 0; i < 5; i++)
-		sc->saved_maps[i] = pci_read_config(dev, PCIR_MAPS + i * 4, 4);
-	sc->saved_biosaddr = pci_read_config(dev, PCIR_BIOS, 4);
-	sc->saved_intline = pci_read_config(dev, PCIR_INTLINE, 1);
-	sc->saved_cachelnsz = pci_read_config(dev, PCIR_CACHELNSZ, 1);
-	sc->saved_lattimer = pci_read_config(dev, PCIR_LATTIMER, 1);
-#endif
-
 	sc->suspended = 1;
 
 	return (0);
@@ -1922,29 +1882,12 @@ static int
 rl_resume(dev)
 	device_t		dev;
 {
-#ifndef BURN_BRIDGES
-	register int		i;
-#endif
 	struct rl_softc		*sc;
 	struct ifnet		*ifp;
 
 	sc = device_get_softc(dev);
 	ifp = &sc->arpcom.ac_if;
 
-#ifndef BURN_BRIDGES
-	/* better way to do this? */
-	for (i = 0; i < 5; i++)
-		pci_write_config(dev, PCIR_MAPS + i * 4, sc->saved_maps[i], 4);
-	pci_write_config(dev, PCIR_BIOS, sc->saved_biosaddr, 4);
-	pci_write_config(dev, PCIR_INTLINE, sc->saved_intline, 1);
-	pci_write_config(dev, PCIR_CACHELNSZ, sc->saved_cachelnsz, 1);
-	pci_write_config(dev, PCIR_LATTIMER, sc->saved_lattimer, 1);
-
-	/* reenable busmastering */
-	pci_enable_busmaster(dev);
-	pci_enable_io(dev, RL_RES);
-#endif
-
 	/* reinitialize interface if necessary */
 	if (ifp->if_flags & IFF_UP)
 		rl_init(sc);
diff --git a/sys/pci/if_rlreg.h b/sys/pci/if_rlreg.h
index 4603524..4f95808 100644
--- a/sys/pci/if_rlreg.h
+++ b/sys/pci/if_rlreg.h
@@ -682,14 +682,6 @@ struct rl_softc {
 #ifdef DEVICE_POLLING
 	int			rxcycles;
 #endif
-
-#ifndef BURN_BRIDGES
-	u_int32_t		saved_maps[5];	/* pci data */
-	u_int32_t		saved_biosaddr;
-	u_int8_t		saved_intline;
-	u_int8_t		saved_cachelnsz;
-	u_int8_t		saved_lattimer;
-#endif
 };
 
 #define	RL_LOCK(_sc)		mtx_lock(&(_sc)->rl_mtx)
diff --git a/sys/pci/if_sf.c b/sys/pci/if_sf.c
index 4019e61..71d9286 100644
--- a/sys/pci/if_sf.c
+++ b/sys/pci/if_sf.c
@@ -649,30 +649,6 @@ sf_attach(dev)
 
 	mtx_init(&sc->sf_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
 	    MTX_DEF | MTX_RECURSE);
-#ifndef BURN_BRIDGES
-	/*
-	 * Handle power management nonsense.
-	 */
-	if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
-		u_int32_t		iobase, membase, irq;
-
-		/* Save important PCI config data. */
-		iobase = pci_read_config(dev, SF_PCI_LOIO, 4);
-		membase = pci_read_config(dev, SF_PCI_LOMEM, 4);
-		irq = pci_read_config(dev, SF_PCI_INTLINE, 4);
-
-		/* Reset the power state. */
-		printf("sf%d: chip is in D%d power mode "
-		    "-- setting to D0\n", unit,
-		    pci_get_powerstate(dev));
-		pci_set_powerstate(dev, PCI_POWERSTATE_D0);
-
-		/* Restore PCI config data. */
-		pci_write_config(dev, SF_PCI_LOIO, iobase, 4);
-		pci_write_config(dev, SF_PCI_LOMEM, membase, 4);
-		pci_write_config(dev, SF_PCI_INTLINE, irq, 4);
-	}
-#endif
 	/*
 	 * Map control/status registers.
 	 */
diff --git a/sys/pci/if_sis.c b/sys/pci/if_sis.c
index 72789f7..108c356 100644
--- a/sys/pci/if_sis.c
+++ b/sys/pci/if_sis.c
@@ -1053,30 +1053,6 @@ sis_attach(dev)
 		sc->sis_type = SIS_TYPE_83815;
 
 	sc->sis_rev = pci_read_config(dev, PCIR_REVID, 1);
-#ifndef BURN_BRIDGES
-	/*
-	 * Handle power management nonsense.
-	 */
-	if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
-		u_int32_t		iobase, membase, irq;
-
-		/* Save important PCI config data. */
-		iobase = pci_read_config(dev, SIS_PCI_LOIO, 4);
-		membase = pci_read_config(dev, SIS_PCI_LOMEM, 4);
-		irq = pci_read_config(dev, SIS_PCI_INTLINE, 4);
-
-		/* Reset the power state. */
-		printf("sis%d: chip is in D%d power mode "
-		    "-- setting to D0\n", unit,
-		    pci_get_powerstate(dev));
-		pci_set_powerstate(dev, PCI_POWERSTATE_D0);
-
-		/* Restore PCI config data. */
-		pci_write_config(dev, SIS_PCI_LOIO, iobase, 4);
-		pci_write_config(dev, SIS_PCI_LOMEM, membase, 4);
-		pci_write_config(dev, SIS_PCI_INTLINE, irq, 4);
-	}
-#endif
 	/*
 	 * Map control/status registers.
 	 */
diff --git a/sys/pci/if_sk.c b/sys/pci/if_sk.c
index 3fe70eb..2db4f7c 100644
--- a/sys/pci/if_sk.c
+++ b/sys/pci/if_sk.c
@@ -1498,30 +1498,6 @@ skc_attach(dev)
 
 	mtx_init(&sc->sk_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
 	    MTX_DEF | MTX_RECURSE);
-#ifndef BURN_BRIDGES
-	/*
-	 * Handle power management nonsense.
-	 */
-	if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
-		u_int32_t		iobase, membase, irq;
-
-		/* Save important PCI config data. */
-		iobase = pci_read_config(dev, SK_PCI_LOIO, 4);
-		membase = pci_read_config(dev, SK_PCI_LOMEM, 4);
-		irq = pci_read_config(dev, SK_PCI_INTLINE, 4);
-
-		/* Reset the power state. */
-		printf("skc%d: chip is in D%d power mode "
-		    "-- setting to D0\n", unit,
-		    pci_get_powerstate(dev));
-		pci_set_powerstate(dev, PCI_POWERSTATE_D0);
-
-		/* Restore PCI config data. */
-		pci_write_config(dev, SK_PCI_LOIO, iobase, 4);
-		pci_write_config(dev, SK_PCI_LOMEM, membase, 4);
-		pci_write_config(dev, SK_PCI_INTLINE, irq, 4);
-	}
-#endif
 	/*
 	 * Map control/status registers.
 	 */
diff --git a/sys/pci/if_ste.c b/sys/pci/if_ste.c
index 4cd92fc..e1f6531 100644
--- a/sys/pci/if_ste.c
+++ b/sys/pci/if_ste.c
@@ -1005,30 +1005,6 @@ ste_attach(dev)
 
 	mtx_init(&sc->ste_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
 	    MTX_DEF | MTX_RECURSE);
-#ifndef BURN_BRIDGES
-	/*
-	 * Handle power management nonsense.
-	 */
-	if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
-		u_int32_t		iobase, membase, irq;
-
-		/* Save important PCI config data. */
-		iobase = pci_read_config(dev, STE_PCI_LOIO, 4);
-		membase = pci_read_config(dev, STE_PCI_LOMEM, 4);
-		irq = pci_read_config(dev, STE_PCI_INTLINE, 4);
-
-		/* Reset the power state. */
-		printf("ste%d: chip is in D%d power mode "
-		    "-- setting to D0\n", unit,
-		    pci_get_powerstate(dev));
-		pci_set_powerstate(dev, PCI_POWERSTATE_D0);
-
-		/* Restore PCI config data. */
-		pci_write_config(dev, STE_PCI_LOIO, iobase, 4);
-		pci_write_config(dev, STE_PCI_LOMEM, membase, 4);
-		pci_write_config(dev, STE_PCI_INTLINE, irq, 4);
-	}
-#endif
 	/*
 	 * Map control/status registers.
 	 */
diff --git a/sys/pci/if_vr.c b/sys/pci/if_vr.c
index 8604ff2..900eda9 100644
--- a/sys/pci/if_vr.c
+++ b/sys/pci/if_vr.c
@@ -715,30 +715,6 @@ vr_attach(dev)
 
 	mtx_init(&sc->vr_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
 	    MTX_DEF | MTX_RECURSE);
-#ifndef BURN_BRIDGES
-	/*
-	 * Handle power management nonsense.
-	 */
-	if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
-		u_int32_t		iobase, membase, irq;
-
-		/* Save important PCI config data. */
-		iobase = pci_read_config(dev, VR_PCI_LOIO, 4);
-		membase = pci_read_config(dev, VR_PCI_LOMEM, 4);
-		irq = pci_read_config(dev, VR_PCI_INTLINE, 4);
-
-		/* Reset the power state. */
-		printf("vr%d: chip is in D%d power mode "
-		    "-- setting to D0\n", unit,
-		    pci_get_powerstate(dev));
-		pci_set_powerstate(dev, PCI_POWERSTATE_D0);
-
-			/* Restore PCI config data. */
-		pci_write_config(dev, VR_PCI_LOIO, iobase, 4);
-		pci_write_config(dev, VR_PCI_LOMEM, membase, 4);
-		pci_write_config(dev, VR_PCI_INTLINE, irq, 4);
-	}
-#endif
 	/*
 	 * Map control/status registers.
 	 */
diff --git a/sys/pci/if_wb.c b/sys/pci/if_wb.c
index 2842f88..d089339 100644
--- a/sys/pci/if_wb.c
+++ b/sys/pci/if_wb.c
@@ -798,31 +798,6 @@ wb_attach(dev)
 
 	mtx_init(&sc->wb_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
 	    MTX_DEF | MTX_RECURSE);
-#ifndef BURN_BRIDGES
-	/*
-	 * Handle power management nonsense.
-	 */
-
-	if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
-		u_int32_t		iobase, membase, irq;
-
-		/* Save important PCI config data. */
-		iobase = pci_read_config(dev, WB_PCI_LOIO, 4);
-		membase = pci_read_config(dev, WB_PCI_LOMEM, 4);
-		irq = pci_read_config(dev, WB_PCI_INTLINE, 4);
-
-		/* Reset the power state. */
-		printf("wb%d: chip is in D%d power mode "
-		    "-- setting to D0\n", unit,
-		    pci_get_powerstate(dev));
-		pci_set_powerstate(dev, PCI_POWERSTATE_D0);
-
-		/* Restore PCI config data. */
-		pci_write_config(dev, WB_PCI_LOIO, iobase, 4);
-		pci_write_config(dev, WB_PCI_LOMEM, membase, 4);
-		pci_write_config(dev, WB_PCI_INTLINE, irq, 4);
-	}
-#endif
 	/*
 	 * Map control/status registers.
 	 */
diff --git a/sys/pci/if_xl.c b/sys/pci/if_xl.c
index 8ce0ee9..31adf06 100644
--- a/sys/pci/if_xl.c
+++ b/sys/pci/if_xl.c
@@ -1358,47 +1358,6 @@ xl_attach(dev)
 		break;
 	}
 
-#ifndef BURN_BRIDGES
-	/*
-	 * If this is a 3c905B, we have to check one extra thing.
-	 * The 905B supports power management and may be placed in
-	 * a low-power mode (D3 mode), typically by certain operating
-	 * systems which shall not be named. The PCI BIOS is supposed
-	 * to reset the NIC and bring it out of low-power mode, but
-	 * some do not. Consequently, we have to see if this chip
-	 * supports power management, and if so, make sure it's not
-	 * in low-power mode. If power management is available, the
-	 * capid byte will be 0x01.
-	 *
-	 * I _think_ that what actually happens is that the chip
-	 * loses its PCI configuration during the transition from
-	 * D3 back to D0; this means that it should be possible for
-	 * us to save the PCI iobase, membase and IRQ, put the chip
-	 * back in the D0 state, then restore the PCI config ourselves.
-	 */
-
-	if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
-		u_int32_t		iobase, membase, irq;
-
-		/* Save important PCI config data. */
-		iobase = pci_read_config(dev, XL_PCI_LOIO, 4);
-		membase = pci_read_config(dev, XL_PCI_LOMEM, 4);
-		irq = pci_read_config(dev, XL_PCI_INTLINE, 4);
-
-		/* Reset the power state. */
-		printf("xl%d: chip is in D%d power mode "
-		    "-- setting to D0\n", unit,
-		    pci_get_powerstate(dev));
-
-		pci_set_powerstate(dev, PCI_POWERSTATE_D0);
-
-		/* Restore PCI config data. */
-		pci_write_config(dev, XL_PCI_LOIO, iobase, 4);
-		pci_write_config(dev, XL_PCI_LOMEM, membase, 4);
-		pci_write_config(dev, XL_PCI_INTLINE, irq, 4);
-	}
-#endif
-
 	/*
 	 * Map control/status registers.
 	 */