Handle ath-specific and WME IE's in adhoc mode.

The Adhoc support wasn't parsing and handling the ath specific and WME
IEs, thus the atheros vendor support and WME TXOP parameters aren't being
copied from the peer.

It copies the WME parameters from whichever adhoc node it decides to
associate to, rather than just having them be statically configured
per adhoc node.  This may or may not be exactly "right", but it's certainly
going to be more convienent for people - they just have to ensure their
adhoc nodes are setup with correct WME parameters.

Since WME parameters aren't per-node but are configured on hardware TX
queues, if some nodes support WME and some don't - or perhaps, have
different WME parameters - things will get quite quirky.

So ensure that you configure your adhoc nodes with the same WME
parameters.

Secondly - the Atheros Vendor IE is parsed and operated on per-node, so
this should work out ok between nodes that do and don't do Atheros
extensions.  Once you see a becaon from that node and you setup the
association state, it _should_ parse things correctly.

TODO:

* I do need to ensure that both adhoc setup paths are correctly updating
  the IE stuff.  Ie, if the adhoc node is created by a data frame instead
  of a beacon frame, it'll come up with no WME/ath IE config.  The next
  beacon frame that it receives from that node will update the state.
  I just need to sit down and better understand how that's suppose to
  work in IBSS mode.

Tested:

* AR5416 <-> AR9280 - fast frames and the WME configuration both popped
  up. (This is with a local HAL patch that enables the fast frames
  capability on the AR5416 chipsets.)

PR:		kern/165969

3 files changed, 19 insertions, 1 deletions

diff --git a/sys/net80211/ieee80211_adhoc.c b/sys/net80211/ieee80211_adhoc.c
index e3d9272..e748725 100644
--- a/sys/net80211/ieee80211_adhoc.c
+++ b/sys/net80211/ieee80211_adhoc.c
@@ -63,6 +63,7 @@ __FBSDID("$FreeBSD$");
 #ifdef IEEE80211_SUPPORT_TDMA
 #include <net80211/ieee80211_tdma.h>
 #endif
+#include <net80211/ieee80211_sta.h>
 
 #define	IEEE80211_RATE2MBS(r)	(((r) & IEEE80211_RATE_VAL) / 2)
 
@@ -745,6 +746,16 @@ adhoc_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m0,
 				memcpy(ni->ni_tstamp.data, scan.tstamp,
 					sizeof(ni->ni_tstamp));
 			}
+			if (scan.wme != NULL &&
+			    (ni->ni_flags & IEEE80211_NODE_QOS) &&
+			    ieee80211_parse_wmeparams(vap, scan.wme, wh) > 0) {
+				ieee80211_wme_updateparams(vap);
+			}
+#ifdef	IEEE80211_SUPPORT_SUPERG
+			if (scan.ath != NULL) {
+				ieee80211_parse_athparams(ni, scan.ath, wh);
+			}
+#endif
 			if (ni != NULL) {
 				IEEE80211_RSSI_LPF(ni->ni_avgrssi, rssi);
 				ni->ni_noise = nf;
diff --git a/sys/net80211/ieee80211_sta.c b/sys/net80211/ieee80211_sta.c
index 88146f3..84d25df 100644
--- a/sys/net80211/ieee80211_sta.c
+++ b/sys/net80211/ieee80211_sta.c
@@ -63,6 +63,7 @@ __FBSDID("$FreeBSD$");
 #include <net80211/ieee80211_superg.h>
 #endif
 #include <net80211/ieee80211_ratectl.h>
+#include <net80211/ieee80211_sta.h>
 
 #define	IEEE80211_RATE2MBS(r)	(((r) & IEEE80211_RATE_VAL) / 2)
 
@@ -1086,7 +1087,7 @@ bad:
 		    IEEE80211_SCAN_FAIL_STATUS);
 }
 
-static int
+int
 ieee80211_parse_wmeparams(struct ieee80211vap *vap, uint8_t *frm,
 	const struct ieee80211_frame *wh)
 {
diff --git a/sys/net80211/ieee80211_sta.h b/sys/net80211/ieee80211_sta.h
index 1508a7c..e97e181 100644
--- a/sys/net80211/ieee80211_sta.h
+++ b/sys/net80211/ieee80211_sta.h
@@ -33,4 +33,10 @@
 void	ieee80211_sta_attach(struct ieee80211com *);
 void	ieee80211_sta_detach(struct ieee80211com *);
 void	ieee80211_sta_vattach(struct ieee80211vap *);
+
+/*
+ * Used by the adhoc/mesh/tdma paths.
+ */
+extern	int ieee80211_parse_wmeparams(struct ieee80211vap *vap, uint8_t *frm,
+	    const struct ieee80211_frame *wh);
 #endif /* !_NET80211_IEEE80211_STA_H_ */