Here are some scripts and man pages for configuring HARP ATM

interfaces.

Reviewed by:	phk
Submitted by:	Mike Spengler <mks@networkcs.com>

17 files changed, 1286 insertions, 12 deletions

diff --git a/etc/Makefile b/etc/Makefile
index 548ad37..2b1302e 100644
--- a/etc/Makefile
+++ b/etc/Makefile
@@ -1,5 +1,5 @@
 #	from: @(#)Makefile	5.11 (Berkeley) 5/21/91
-#	$Id: Makefile,v 1.176 1998/09/25 07:42:29 dima Exp $
+#	$Id: Makefile,v 1.177 1998/09/25 08:21:15 dima Exp $
 
 SUBDIR=	sendmail
 
@@ -7,7 +7,7 @@ BIN1=   aliases amd.map crontab csh.cshrc csh.login csh.logout dm.conf \
 	fbtab ftpusers gettytab group hosts host.conf hosts.equiv hosts.lpd \
 	inetd.conf login.conf login.access motd modems networks \
 	newsyslog.conf phones pccard.conf.sample printcap profile protocols \
-	rc rc.conf rc.devfs rc.firewall rc.local rc.network rc.pccard \
+	rc rc.atm rc.conf rc.devfs rc.firewall rc.local rc.network rc.pccard \
 	rc.serial rc.shutdown etc.${MACHINE_ARCH}/rc.${MACHINE_ARCH} \
 	remote security services shells syslog.conf \
 	etc.${MACHINE_ARCH}/ttys etc.${MACHINE_ARCH}/disktab rpc make.conf \
diff --git a/etc/network.subr b/etc/network.subr
index a6412a8..cf9ff66 100644
--- a/etc/network.subr
+++ b/etc/network.subr
@@ -1,6 +1,6 @@
 #!/bin/sh -
 #
-#	$Id: rc.network,v 1.31 1998/09/15 10:49:02 jkoshy Exp $
+#	$Id: rc.network,v 1.32 1998/09/16 20:38:23 cracauer Exp $
 #	From: @(#)netstart	5.9 (Berkeley) 3/30/91
 
 # Note that almost all the user-configurable behavior is no longer in
@@ -25,6 +25,12 @@ network_pass1() {
     fi
     echo '.'
 
+    # Initial ATM interface configuration
+    if [ "X${atm_enable}" = X"YES" -a -f /etc/rc.atm ]; then
+	    . /etc/rc.atm
+	    atm_pass1
+    fi
+
     # Set up all the network interfaces, calling startup scripts if needed
     for ifn in ${network_interfaces}; do
 	    if [ -e /etc/start_if.${ifn} ]; then
@@ -89,6 +95,11 @@ network_pass1() {
 	fi
     fi
 
+    # Additional ATM interface configuration
+    if [ -n "${atm_pass1_done}" ]; then
+	    atm_pass2
+    fi
+
     # Configure routing
 
     if [ "x$defaultrouter" != "xNO" ] ; then
@@ -215,6 +226,11 @@ network_pass2() {
 	    echo -n ' rpc.ypupdated';	rpc.ypupdated
     fi
 
+    # Start ATM daemons
+    if [ -n "${atm_pass2_done}" ]; then
+	    atm_pass3
+    fi
+
     echo '.'
     network_pass2_done=YES
 }
diff --git a/etc/rc.atm b/etc/rc.atm
new file mode 100644
index 0000000..42854c0
--- /dev/null
+++ b/etc/rc.atm
@@ -0,0 +1,175 @@
+#!/bin/sh
+#
+
+# ATM networking startup script
+#
+#	$Id$
+
+#
+# Initial interface configuration.
+# N.B. /usr is not mounted.
+#
+atm_pass1() {
+    # Locate all probed ATM adapters by scanning dmesg output
+    saveifs="${IFS}"
+    IFS=$IFS:
+    atmdev=`dmesg | while read dev junk; do
+	case ${dev} in
+	hea[0-9]|hea[0-9][0-9])
+		echo "${dev} "
+		;;
+	hfa[0-9]|hfa[0-9][0-9])
+		echo "${dev} "
+		;;
+	*)
+		continue
+		;;
+	esac
+    done`
+    IFS="${saveifs}"
+
+    if [ -z "${atmdev}" ]; then
+	echo "No ATM adapters found."
+	return 0
+    fi
+
+    # Load microcode into FORE adapters (if needed)
+    if [ `expr "${atmdev}" : '.*hfa.*'` -ne 0 ]; then
+	fore_dnld -d /etc
+    fi
+
+    # Configure physical interfaces
+    ilmid=0
+    for phy in ${atmdev}; do
+	echo -n "Configuring ATM device ${phy}:"
+
+	# Define network interfaces
+	eval netif_args=\$atm_netif_${phy}
+	if [ -n "${netif_args}" ]; then
+		atm set netif ${phy} ${netif_args} || continue
+	else
+		echo "missing network interface definition"
+		continue
+	fi
+
+	# Override physical MAC address
+	eval macaddr_args=\$atm_macaddr_${phy}
+	if [ -n "${macaddr_args}" -a "${macaddr_args}" != "NO" ]; then
+		atm set mac ${phy} ${macaddr_args} || continue
+	fi
+
+	# Configure signalling manager
+	eval sigmgr_args=\$atm_sigmgr_${phy}
+	if [ -n "${sigmgr_args}" ]; then
+		atm attach ${phy} ${sigmgr_args} || continue
+	else
+		echo "missing signalling manager definition"
+		continue
+	fi
+
+	# Configure UNI NSAP prefix
+	eval prefix_args=\$atm_prefix_${phy}
+	if [ `expr "${sigmgr_args}" : '[uU][nN][iI].*'` -ne 0 ]; then
+		if [ -z "${prefix_args}" ]; then
+			echo "missing NSAP prefix for UNI interface"
+			continue
+		fi
+		if [ "${prefix_args}" = "ILMI" ]; then
+			ilmid=1
+		else
+			atm set prefix ${phy} ${prefix_args} || continue
+		fi
+	fi
+
+	atm_phy="${atm_phy} ${phy}"
+	echo "."
+    done
+
+    echo -n "Starting initial ATM daemons:"
+    # Start ILMI daemon (if needed)
+    if [ ${ilmid} -eq 1 ]; then
+	echo -n " ilmid"
+	ilmid
+    fi
+
+    echo "."
+    atm_pass1_done=YES
+}
+
+#
+# Finish up configuration.
+# N.B. /usr is not mounted.
+#
+atm_pass2() {
+    echo -n "Configuring ATM network interfaces:"
+
+    atm_scspd=0
+    atm_atmarpd=""
+
+    # Configure network interfaces
+    for phy in ${atm_phy}; do
+	eval netif_args=\$atm_netif_${phy}
+	set -- ${netif_args}
+	netname=$1
+	netcnt=$2
+	netindx=0
+	while [ ${netindx} -lt ${netcnt} ]; do
+
+		net="${netname}${netindx}"
+		netindx=`expr ${netindx} + 1`
+		echo -n " ${net}"
+
+		# Configure atmarp server
+		eval atmarp_args=\$atm_arpserver_${net}
+		if [ -n "${atmarp_args}" ]; then
+			atm set arpserver ${net} ${atmarp_args} || continue
+		fi
+		eval scsparp_args=\$atm_scsparp_${net}
+		if [ "X${scsparp_args}" = X"YES" ]; then
+			if [ "${atmarp_args}" != "local" ]; then
+				echo "local arpserver required for SCSP"
+				continue
+			fi
+			atm_atmarpd="${atm_atmarpd} ${net}"
+			atm_scspd=1
+		fi
+	done
+    done
+    echo "."
+
+    # Define any PVCs.
+    if [ "X${atm_pvcs}" != "X" ]; then
+	for i in ${atm_pvcs}; do
+		eval pvc_args=\$atm_pvc_${i}
+		atm add pvc ${pvc_args}
+	done
+    fi
+
+    # Define any permanent ARP entries.
+    if [ "X${atm_arps}" != "X" ]; then
+	for i in ${atm_arps}; do
+		eval arp_args=\$atm_arp_${i}
+		atm add arp ${arp_args}
+	done
+    fi
+    atm_pass2_done=YES
+}
+
+#
+# Start any necessary daemons.
+#
+atm_pass3() {
+    # Start SCSP daemon (if needed)
+    if [ ${atm_scspd} -eq 1 ]; then
+	echo -n " scspd"
+	scspd
+    fi
+
+    # Start ATMARP daemon (if needed)
+    if [ -n "${atm_atmarpd}" ]; then
+	echo -n " atmarpd"
+	atmarpd ${atm_atmarpd}
+    fi
+
+    atm_pass3_done=YES
+}
diff --git a/etc/rc.conf b/etc/rc.conf
index b3db518..7404d92 100644
--- a/etc/rc.conf
+++ b/etc/rc.conf
@@ -6,7 +6,7 @@
 #
 # All arguments must be in double or single quotes.
 #
-#	$Id: rc.conf,v 1.58 1998/09/16 05:42:38 jdp Exp $
+#	$Id: rc.conf,v 1.59 1998/09/23 04:42:02 jkh Exp $
 
 ##############################################################
 ### Important initial Boot-time options  #####################
@@ -114,6 +114,17 @@ arpproxy_all=""			# replaces obsolete kernel option ARP_PROXYALL.
 forward_sourceroute="NO"	# do source routing (only if gateway_enable is set to "YES")
 accept_sourceroute="NO"		# accept source routed packets to us
 
+### ATM interface options: ###
+atm_enable="NO"			# Configure ATM interfaces (or NO).
+#atm_netif_hea0="atm 1"		# Network interfaces for physical interface.
+#atm_sigmgr_hea0="uni31"	# Signalling manager for physical interface.
+#atm_prefix_hea0="ILMI"		# NSAP prefix (UNI interfaces only) (or ILMI).
+#atm_macaddr_hea0="NO"		# Override physical MAC address (or NO).
+#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
+#atm_scsparp_atm0="NO"		# Run SCSP/ATMARP on network interface (or NO).
+atm_pvcs=""			# Set to PVC list (or leave empty).
+atm_arps=""			# Set to permanent ARP list (or leave empty).
+
 ### Miscellaneous network options: ###
 icmp_bmcastecho="NO"	# respond to broadcast ping packets
 
diff --git a/etc/rc.d/atm1 b/etc/rc.d/atm1
new file mode 100644
index 0000000..42854c0
--- /dev/null
+++ b/etc/rc.d/atm1
@@ -0,0 +1,175 @@
+#!/bin/sh
+#
+
+# ATM networking startup script
+#
+#	$Id$
+
+#
+# Initial interface configuration.
+# N.B. /usr is not mounted.
+#
+atm_pass1() {
+    # Locate all probed ATM adapters by scanning dmesg output
+    saveifs="${IFS}"
+    IFS=$IFS:
+    atmdev=`dmesg | while read dev junk; do
+	case ${dev} in
+	hea[0-9]|hea[0-9][0-9])
+		echo "${dev} "
+		;;
+	hfa[0-9]|hfa[0-9][0-9])
+		echo "${dev} "
+		;;
+	*)
+		continue
+		;;
+	esac
+    done`
+    IFS="${saveifs}"
+
+    if [ -z "${atmdev}" ]; then
+	echo "No ATM adapters found."
+	return 0
+    fi
+
+    # Load microcode into FORE adapters (if needed)
+    if [ `expr "${atmdev}" : '.*hfa.*'` -ne 0 ]; then
+	fore_dnld -d /etc
+    fi
+
+    # Configure physical interfaces
+    ilmid=0
+    for phy in ${atmdev}; do
+	echo -n "Configuring ATM device ${phy}:"
+
+	# Define network interfaces
+	eval netif_args=\$atm_netif_${phy}
+	if [ -n "${netif_args}" ]; then
+		atm set netif ${phy} ${netif_args} || continue
+	else
+		echo "missing network interface definition"
+		continue
+	fi
+
+	# Override physical MAC address
+	eval macaddr_args=\$atm_macaddr_${phy}
+	if [ -n "${macaddr_args}" -a "${macaddr_args}" != "NO" ]; then
+		atm set mac ${phy} ${macaddr_args} || continue
+	fi
+
+	# Configure signalling manager
+	eval sigmgr_args=\$atm_sigmgr_${phy}
+	if [ -n "${sigmgr_args}" ]; then
+		atm attach ${phy} ${sigmgr_args} || continue
+	else
+		echo "missing signalling manager definition"
+		continue
+	fi
+
+	# Configure UNI NSAP prefix
+	eval prefix_args=\$atm_prefix_${phy}
+	if [ `expr "${sigmgr_args}" : '[uU][nN][iI].*'` -ne 0 ]; then
+		if [ -z "${prefix_args}" ]; then
+			echo "missing NSAP prefix for UNI interface"
+			continue
+		fi
+		if [ "${prefix_args}" = "ILMI" ]; then
+			ilmid=1
+		else
+			atm set prefix ${phy} ${prefix_args} || continue
+		fi
+	fi
+
+	atm_phy="${atm_phy} ${phy}"
+	echo "."
+    done
+
+    echo -n "Starting initial ATM daemons:"
+    # Start ILMI daemon (if needed)
+    if [ ${ilmid} -eq 1 ]; then
+	echo -n " ilmid"
+	ilmid
+    fi
+
+    echo "."
+    atm_pass1_done=YES
+}
+
+#
+# Finish up configuration.
+# N.B. /usr is not mounted.
+#
+atm_pass2() {
+    echo -n "Configuring ATM network interfaces:"
+
+    atm_scspd=0
+    atm_atmarpd=""
+
+    # Configure network interfaces
+    for phy in ${atm_phy}; do
+	eval netif_args=\$atm_netif_${phy}
+	set -- ${netif_args}
+	netname=$1
+	netcnt=$2
+	netindx=0
+	while [ ${netindx} -lt ${netcnt} ]; do
+
+		net="${netname}${netindx}"
+		netindx=`expr ${netindx} + 1`
+		echo -n " ${net}"
+
+		# Configure atmarp server
+		eval atmarp_args=\$atm_arpserver_${net}
+		if [ -n "${atmarp_args}" ]; then
+			atm set arpserver ${net} ${atmarp_args} || continue
+		fi
+		eval scsparp_args=\$atm_scsparp_${net}
+		if [ "X${scsparp_args}" = X"YES" ]; then
+			if [ "${atmarp_args}" != "local" ]; then
+				echo "local arpserver required for SCSP"
+				continue
+			fi
+			atm_atmarpd="${atm_atmarpd} ${net}"
+			atm_scspd=1
+		fi
+	done
+    done
+    echo "."
+
+    # Define any PVCs.
+    if [ "X${atm_pvcs}" != "X" ]; then
+	for i in ${atm_pvcs}; do
+		eval pvc_args=\$atm_pvc_${i}
+		atm add pvc ${pvc_args}
+	done
+    fi
+
+    # Define any permanent ARP entries.
+    if [ "X${atm_arps}" != "X" ]; then
+	for i in ${atm_arps}; do
+		eval arp_args=\$atm_arp_${i}
+		atm add arp ${arp_args}
+	done
+    fi
+    atm_pass2_done=YES
+}
+
+#
+# Start any necessary daemons.
+#
+atm_pass3() {
+    # Start SCSP daemon (if needed)
+    if [ ${atm_scspd} -eq 1 ]; then
+	echo -n " scspd"
+	scspd
+    fi
+
+    # Start ATMARP daemon (if needed)
+    if [ -n "${atm_atmarpd}" ]; then
+	echo -n " atmarpd"
+	atmarpd ${atm_atmarpd}
+    fi
+
+    atm_pass3_done=YES
+}
diff --git a/etc/rc.d/atm2 b/etc/rc.d/atm2
new file mode 100644
index 0000000..42854c0
--- /dev/null
+++ b/etc/rc.d/atm2
@@ -0,0 +1,175 @@
+#!/bin/sh
+#
+
+# ATM networking startup script
+#
+#	$Id$
+
+#
+# Initial interface configuration.
+# N.B. /usr is not mounted.
+#
+atm_pass1() {
+    # Locate all probed ATM adapters by scanning dmesg output
+    saveifs="${IFS}"
+    IFS=$IFS:
+    atmdev=`dmesg | while read dev junk; do
+	case ${dev} in
+	hea[0-9]|hea[0-9][0-9])
+		echo "${dev} "
+		;;
+	hfa[0-9]|hfa[0-9][0-9])
+		echo "${dev} "
+		;;
+	*)
+		continue
+		;;
+	esac
+    done`
+    IFS="${saveifs}"
+
+    if [ -z "${atmdev}" ]; then
+	echo "No ATM adapters found."
+	return 0
+    fi
+
+    # Load microcode into FORE adapters (if needed)
+    if [ `expr "${atmdev}" : '.*hfa.*'` -ne 0 ]; then
+	fore_dnld -d /etc
+    fi
+
+    # Configure physical interfaces
+    ilmid=0
+    for phy in ${atmdev}; do
+	echo -n "Configuring ATM device ${phy}:"
+
+	# Define network interfaces
+	eval netif_args=\$atm_netif_${phy}
+	if [ -n "${netif_args}" ]; then
+		atm set netif ${phy} ${netif_args} || continue
+	else
+		echo "missing network interface definition"
+		continue
+	fi
+
+	# Override physical MAC address
+	eval macaddr_args=\$atm_macaddr_${phy}
+	if [ -n "${macaddr_args}" -a "${macaddr_args}" != "NO" ]; then
+		atm set mac ${phy} ${macaddr_args} || continue
+	fi
+
+	# Configure signalling manager
+	eval sigmgr_args=\$atm_sigmgr_${phy}
+	if [ -n "${sigmgr_args}" ]; then
+		atm attach ${phy} ${sigmgr_args} || continue
+	else
+		echo "missing signalling manager definition"
+		continue
+	fi
+
+	# Configure UNI NSAP prefix
+	eval prefix_args=\$atm_prefix_${phy}
+	if [ `expr "${sigmgr_args}" : '[uU][nN][iI].*'` -ne 0 ]; then
+		if [ -z "${prefix_args}" ]; then
+			echo "missing NSAP prefix for UNI interface"
+			continue
+		fi
+		if [ "${prefix_args}" = "ILMI" ]; then
+			ilmid=1
+		else
+			atm set prefix ${phy} ${prefix_args} || continue
+		fi
+	fi
+
+	atm_phy="${atm_phy} ${phy}"
+	echo "."
+    done
+
+    echo -n "Starting initial ATM daemons:"
+    # Start ILMI daemon (if needed)
+    if [ ${ilmid} -eq 1 ]; then
+	echo -n " ilmid"
+	ilmid
+    fi
+
+    echo "."
+    atm_pass1_done=YES
+}
+
+#
+# Finish up configuration.
+# N.B. /usr is not mounted.
+#
+atm_pass2() {
+    echo -n "Configuring ATM network interfaces:"
+
+    atm_scspd=0
+    atm_atmarpd=""
+
+    # Configure network interfaces
+    for phy in ${atm_phy}; do
+	eval netif_args=\$atm_netif_${phy}
+	set -- ${netif_args}
+	netname=$1
+	netcnt=$2
+	netindx=0
+	while [ ${netindx} -lt ${netcnt} ]; do
+
+		net="${netname}${netindx}"
+		netindx=`expr ${netindx} + 1`
+		echo -n " ${net}"
+
+		# Configure atmarp server
+		eval atmarp_args=\$atm_arpserver_${net}
+		if [ -n "${atmarp_args}" ]; then
+			atm set arpserver ${net} ${atmarp_args} || continue
+		fi
+		eval scsparp_args=\$atm_scsparp_${net}
+		if [ "X${scsparp_args}" = X"YES" ]; then
+			if [ "${atmarp_args}" != "local" ]; then
+				echo "local arpserver required for SCSP"
+				continue
+			fi
+			atm_atmarpd="${atm_atmarpd} ${net}"
+			atm_scspd=1
+		fi
+	done
+    done
+    echo "."
+
+    # Define any PVCs.
+    if [ "X${atm_pvcs}" != "X" ]; then
+	for i in ${atm_pvcs}; do
+		eval pvc_args=\$atm_pvc_${i}
+		atm add pvc ${pvc_args}
+	done
+    fi
+
+    # Define any permanent ARP entries.
+    if [ "X${atm_arps}" != "X" ]; then
+	for i in ${atm_arps}; do
+		eval arp_args=\$atm_arp_${i}
+		atm add arp ${arp_args}
+	done
+    fi
+    atm_pass2_done=YES
+}
+
+#
+# Start any necessary daemons.
+#
+atm_pass3() {
+    # Start SCSP daemon (if needed)
+    if [ ${atm_scspd} -eq 1 ]; then
+	echo -n " scspd"
+	scspd
+    fi
+
+    # Start ATMARP daemon (if needed)
+    if [ -n "${atm_atmarpd}" ]; then
+	echo -n " atmarpd"
+	atmarpd ${atm_atmarpd}
+    fi
+
+    atm_pass3_done=YES
+}
diff --git a/etc/rc.d/atm2.sh b/etc/rc.d/atm2.sh
new file mode 100644
index 0000000..42854c0
--- /dev/null
+++ b/etc/rc.d/atm2.sh
@@ -0,0 +1,175 @@
+#!/bin/sh
+#
+
+# ATM networking startup script
+#
+#	$Id$
+
+#
+# Initial interface configuration.
+# N.B. /usr is not mounted.
+#
+atm_pass1() {
+    # Locate all probed ATM adapters by scanning dmesg output
+    saveifs="${IFS}"
+    IFS=$IFS:
+    atmdev=`dmesg | while read dev junk; do
+	case ${dev} in
+	hea[0-9]|hea[0-9][0-9])
+		echo "${dev} "
+		;;
+	hfa[0-9]|hfa[0-9][0-9])
+		echo "${dev} "
+		;;
+	*)
+		continue
+		;;
+	esac
+    done`
+    IFS="${saveifs}"
+
+    if [ -z "${atmdev}" ]; then
+	echo "No ATM adapters found."
+	return 0
+    fi
+
+    # Load microcode into FORE adapters (if needed)
+    if [ `expr "${atmdev}" : '.*hfa.*'` -ne 0 ]; then
+	fore_dnld -d /etc
+    fi
+
+    # Configure physical interfaces
+    ilmid=0
+    for phy in ${atmdev}; do
+	echo -n "Configuring ATM device ${phy}:"
+
+	# Define network interfaces
+	eval netif_args=\$atm_netif_${phy}
+	if [ -n "${netif_args}" ]; then
+		atm set netif ${phy} ${netif_args} || continue
+	else
+		echo "missing network interface definition"
+		continue
+	fi
+
+	# Override physical MAC address
+	eval macaddr_args=\$atm_macaddr_${phy}
+	if [ -n "${macaddr_args}" -a "${macaddr_args}" != "NO" ]; then
+		atm set mac ${phy} ${macaddr_args} || continue
+	fi
+
+	# Configure signalling manager
+	eval sigmgr_args=\$atm_sigmgr_${phy}
+	if [ -n "${sigmgr_args}" ]; then
+		atm attach ${phy} ${sigmgr_args} || continue
+	else
+		echo "missing signalling manager definition"
+		continue
+	fi
+
+	# Configure UNI NSAP prefix
+	eval prefix_args=\$atm_prefix_${phy}
+	if [ `expr "${sigmgr_args}" : '[uU][nN][iI].*'` -ne 0 ]; then
+		if [ -z "${prefix_args}" ]; then
+			echo "missing NSAP prefix for UNI interface"
+			continue
+		fi
+		if [ "${prefix_args}" = "ILMI" ]; then
+			ilmid=1
+		else
+			atm set prefix ${phy} ${prefix_args} || continue
+		fi
+	fi
+
+	atm_phy="${atm_phy} ${phy}"
+	echo "."
+    done
+
+    echo -n "Starting initial ATM daemons:"
+    # Start ILMI daemon (if needed)
+    if [ ${ilmid} -eq 1 ]; then
+	echo -n " ilmid"
+	ilmid
+    fi
+
+    echo "."
+    atm_pass1_done=YES
+}
+
+#
+# Finish up configuration.
+# N.B. /usr is not mounted.
+#
+atm_pass2() {
+    echo -n "Configuring ATM network interfaces:"
+
+    atm_scspd=0
+    atm_atmarpd=""
+
+    # Configure network interfaces
+    for phy in ${atm_phy}; do
+	eval netif_args=\$atm_netif_${phy}
+	set -- ${netif_args}
+	netname=$1
+	netcnt=$2
+	netindx=0
+	while [ ${netindx} -lt ${netcnt} ]; do
+
+		net="${netname}${netindx}"
+		netindx=`expr ${netindx} + 1`
+		echo -n " ${net}"
+
+		# Configure atmarp server
+		eval atmarp_args=\$atm_arpserver_${net}
+		if [ -n "${atmarp_args}" ]; then
+			atm set arpserver ${net} ${atmarp_args} || continue
+		fi
+		eval scsparp_args=\$atm_scsparp_${net}
+		if [ "X${scsparp_args}" = X"YES" ]; then
+			if [ "${atmarp_args}" != "local" ]; then
+				echo "local arpserver required for SCSP"
+				continue
+			fi
+			atm_atmarpd="${atm_atmarpd} ${net}"
+			atm_scspd=1
+		fi
+	done
+    done
+    echo "."
+
+    # Define any PVCs.
+    if [ "X${atm_pvcs}" != "X" ]; then
+	for i in ${atm_pvcs}; do
+		eval pvc_args=\$atm_pvc_${i}
+		atm add pvc ${pvc_args}
+	done
+    fi
+
+    # Define any permanent ARP entries.
+    if [ "X${atm_arps}" != "X" ]; then
+	for i in ${atm_arps}; do
+		eval arp_args=\$atm_arp_${i}
+		atm add arp ${arp_args}
+	done
+    fi
+    atm_pass2_done=YES
+}
+
+#
+# Start any necessary daemons.
+#
+atm_pass3() {
+    # Start SCSP daemon (if needed)
+    if [ ${atm_scspd} -eq 1 ]; then
+	echo -n " scspd"
+	scspd
+    fi
+
+    # Start ATMARP daemon (if needed)
+    if [ -n "${atm_atmarpd}" ]; then
+	echo -n " atmarpd"
+	atmarpd ${atm_atmarpd}
+    fi
+
+    atm_pass3_done=YES
+}
diff --git a/etc/rc.d/atm3 b/etc/rc.d/atm3
new file mode 100644
index 0000000..42854c0
--- /dev/null
+++ b/etc/rc.d/atm3
@@ -0,0 +1,175 @@
+#!/bin/sh
+#
+
+# ATM networking startup script
+#
+#	$Id$
+
+#
+# Initial interface configuration.
+# N.B. /usr is not mounted.
+#
+atm_pass1() {
+    # Locate all probed ATM adapters by scanning dmesg output
+    saveifs="${IFS}"
+    IFS=$IFS:
+    atmdev=`dmesg | while read dev junk; do
+	case ${dev} in
+	hea[0-9]|hea[0-9][0-9])
+		echo "${dev} "
+		;;
+	hfa[0-9]|hfa[0-9][0-9])
+		echo "${dev} "
+		;;
+	*)
+		continue
+		;;
+	esac
+    done`
+    IFS="${saveifs}"
+
+    if [ -z "${atmdev}" ]; then
+	echo "No ATM adapters found."
+	return 0
+    fi
+
+    # Load microcode into FORE adapters (if needed)
+    if [ `expr "${atmdev}" : '.*hfa.*'` -ne 0 ]; then
+	fore_dnld -d /etc
+    fi
+
+    # Configure physical interfaces
+    ilmid=0
+    for phy in ${atmdev}; do
+	echo -n "Configuring ATM device ${phy}:"
+
+	# Define network interfaces
+	eval netif_args=\$atm_netif_${phy}
+	if [ -n "${netif_args}" ]; then
+		atm set netif ${phy} ${netif_args} || continue
+	else
+		echo "missing network interface definition"
+		continue
+	fi
+
+	# Override physical MAC address
+	eval macaddr_args=\$atm_macaddr_${phy}
+	if [ -n "${macaddr_args}" -a "${macaddr_args}" != "NO" ]; then
+		atm set mac ${phy} ${macaddr_args} || continue
+	fi
+
+	# Configure signalling manager
+	eval sigmgr_args=\$atm_sigmgr_${phy}
+	if [ -n "${sigmgr_args}" ]; then
+		atm attach ${phy} ${sigmgr_args} || continue
+	else
+		echo "missing signalling manager definition"
+		continue
+	fi
+
+	# Configure UNI NSAP prefix
+	eval prefix_args=\$atm_prefix_${phy}
+	if [ `expr "${sigmgr_args}" : '[uU][nN][iI].*'` -ne 0 ]; then
+		if [ -z "${prefix_args}" ]; then
+			echo "missing NSAP prefix for UNI interface"
+			continue
+		fi
+		if [ "${prefix_args}" = "ILMI" ]; then
+			ilmid=1
+		else
+			atm set prefix ${phy} ${prefix_args} || continue
+		fi
+	fi
+
+	atm_phy="${atm_phy} ${phy}"
+	echo "."
+    done
+
+    echo -n "Starting initial ATM daemons:"
+    # Start ILMI daemon (if needed)
+    if [ ${ilmid} -eq 1 ]; then
+	echo -n " ilmid"
+	ilmid
+    fi
+
+    echo "."
+    atm_pass1_done=YES
+}
+
+#
+# Finish up configuration.
+# N.B. /usr is not mounted.
+#
+atm_pass2() {
+    echo -n "Configuring ATM network interfaces:"
+
+    atm_scspd=0
+    atm_atmarpd=""
+
+    # Configure network interfaces
+    for phy in ${atm_phy}; do
+	eval netif_args=\$atm_netif_${phy}
+	set -- ${netif_args}
+	netname=$1
+	netcnt=$2
+	netindx=0
+	while [ ${netindx} -lt ${netcnt} ]; do
+
+		net="${netname}${netindx}"
+		netindx=`expr ${netindx} + 1`
+		echo -n " ${net}"
+
+		# Configure atmarp server
+		eval atmarp_args=\$atm_arpserver_${net}
+		if [ -n "${atmarp_args}" ]; then
+			atm set arpserver ${net} ${atmarp_args} || continue
+		fi
+		eval scsparp_args=\$atm_scsparp_${net}
+		if [ "X${scsparp_args}" = X"YES" ]; then
+			if [ "${atmarp_args}" != "local" ]; then
+				echo "local arpserver required for SCSP"
+				continue
+			fi
+			atm_atmarpd="${atm_atmarpd} ${net}"
+			atm_scspd=1
+		fi
+	done
+    done
+    echo "."
+
+    # Define any PVCs.
+    if [ "X${atm_pvcs}" != "X" ]; then
+	for i in ${atm_pvcs}; do
+		eval pvc_args=\$atm_pvc_${i}
+		atm add pvc ${pvc_args}
+	done
+    fi
+
+    # Define any permanent ARP entries.
+    if [ "X${atm_arps}" != "X" ]; then
+	for i in ${atm_arps}; do
+		eval arp_args=\$atm_arp_${i}
+		atm add arp ${arp_args}
+	done
+    fi
+    atm_pass2_done=YES
+}
+
+#
+# Start any necessary daemons.
+#
+atm_pass3() {
+    # Start SCSP daemon (if needed)
+    if [ ${atm_scspd} -eq 1 ]; then
+	echo -n " scspd"
+	scspd
+    fi
+
+    # Start ATMARP daemon (if needed)
+    if [ -n "${atm_atmarpd}" ]; then
+	echo -n " atmarpd"
+	atmarpd ${atm_atmarpd}
+    fi
+
+    atm_pass3_done=YES
+}
diff --git a/etc/rc.d/atm3.sh b/etc/rc.d/atm3.sh
new file mode 100644
index 0000000..42854c0
--- /dev/null
+++ b/etc/rc.d/atm3.sh
@@ -0,0 +1,175 @@
+#!/bin/sh
+#
+
+# ATM networking startup script
+#
+#	$Id$
+
+#
+# Initial interface configuration.
+# N.B. /usr is not mounted.
+#
+atm_pass1() {
+    # Locate all probed ATM adapters by scanning dmesg output
+    saveifs="${IFS}"
+    IFS=$IFS:
+    atmdev=`dmesg | while read dev junk; do
+	case ${dev} in
+	hea[0-9]|hea[0-9][0-9])
+		echo "${dev} "
+		;;
+	hfa[0-9]|hfa[0-9][0-9])
+		echo "${dev} "
+		;;
+	*)
+		continue
+		;;
+	esac
+    done`
+    IFS="${saveifs}"
+
+    if [ -z "${atmdev}" ]; then
+	echo "No ATM adapters found."
+	return 0
+    fi
+
+    # Load microcode into FORE adapters (if needed)
+    if [ `expr "${atmdev}" : '.*hfa.*'` -ne 0 ]; then
+	fore_dnld -d /etc
+    fi
+
+    # Configure physical interfaces
+    ilmid=0
+    for phy in ${atmdev}; do
+	echo -n "Configuring ATM device ${phy}:"
+
+	# Define network interfaces
+	eval netif_args=\$atm_netif_${phy}
+	if [ -n "${netif_args}" ]; then
+		atm set netif ${phy} ${netif_args} || continue
+	else
+		echo "missing network interface definition"
+		continue
+	fi
+
+	# Override physical MAC address
+	eval macaddr_args=\$atm_macaddr_${phy}
+	if [ -n "${macaddr_args}" -a "${macaddr_args}" != "NO" ]; then
+		atm set mac ${phy} ${macaddr_args} || continue
+	fi
+
+	# Configure signalling manager
+	eval sigmgr_args=\$atm_sigmgr_${phy}
+	if [ -n "${sigmgr_args}" ]; then
+		atm attach ${phy} ${sigmgr_args} || continue
+	else
+		echo "missing signalling manager definition"
+		continue
+	fi
+
+	# Configure UNI NSAP prefix
+	eval prefix_args=\$atm_prefix_${phy}
+	if [ `expr "${sigmgr_args}" : '[uU][nN][iI].*'` -ne 0 ]; then
+		if [ -z "${prefix_args}" ]; then
+			echo "missing NSAP prefix for UNI interface"
+			continue
+		fi
+		if [ "${prefix_args}" = "ILMI" ]; then
+			ilmid=1
+		else
+			atm set prefix ${phy} ${prefix_args} || continue
+		fi
+	fi
+
+	atm_phy="${atm_phy} ${phy}"
+	echo "."
+    done
+
+    echo -n "Starting initial ATM daemons:"
+    # Start ILMI daemon (if needed)
+    if [ ${ilmid} -eq 1 ]; then
+	echo -n " ilmid"
+	ilmid
+    fi
+
+    echo "."
+    atm_pass1_done=YES
+}
+
+#
+# Finish up configuration.
+# N.B. /usr is not mounted.
+#
+atm_pass2() {
+    echo -n "Configuring ATM network interfaces:"
+
+    atm_scspd=0
+    atm_atmarpd=""
+
+    # Configure network interfaces
+    for phy in ${atm_phy}; do
+	eval netif_args=\$atm_netif_${phy}
+	set -- ${netif_args}
+	netname=$1
+	netcnt=$2
+	netindx=0
+	while [ ${netindx} -lt ${netcnt} ]; do
+
+		net="${netname}${netindx}"
+		netindx=`expr ${netindx} + 1`
+		echo -n " ${net}"
+
+		# Configure atmarp server
+		eval atmarp_args=\$atm_arpserver_${net}
+		if [ -n "${atmarp_args}" ]; then
+			atm set arpserver ${net} ${atmarp_args} || continue
+		fi
+		eval scsparp_args=\$atm_scsparp_${net}
+		if [ "X${scsparp_args}" = X"YES" ]; then
+			if [ "${atmarp_args}" != "local" ]; then
+				echo "local arpserver required for SCSP"
+				continue
+			fi
+			atm_atmarpd="${atm_atmarpd} ${net}"
+			atm_scspd=1
+		fi
+	done
+    done
+    echo "."
+
+    # Define any PVCs.
+    if [ "X${atm_pvcs}" != "X" ]; then
+	for i in ${atm_pvcs}; do
+		eval pvc_args=\$atm_pvc_${i}
+		atm add pvc ${pvc_args}
+	done
+    fi
+
+    # Define any permanent ARP entries.
+    if [ "X${atm_arps}" != "X" ]; then
+	for i in ${atm_arps}; do
+		eval arp_args=\$atm_arp_${i}
+		atm add arp ${arp_args}
+	done
+    fi
+    atm_pass2_done=YES
+}
+
+#
+# Start any necessary daemons.
+#
+atm_pass3() {
+    # Start SCSP daemon (if needed)
+    if [ ${atm_scspd} -eq 1 ]; then
+	echo -n " scspd"
+	scspd
+    fi
+
+    # Start ATMARP daemon (if needed)
+    if [ -n "${atm_atmarpd}" ]; then
+	echo -n " atmarpd"
+	atmarpd ${atm_atmarpd}
+    fi
+
+    atm_pass3_done=YES
+}
diff --git a/etc/rc.d/netoptions b/etc/rc.d/netoptions
index a6412a8..cf9ff66 100644
--- a/etc/rc.d/netoptions
+++ b/etc/rc.d/netoptions
@@ -1,6 +1,6 @@
 #!/bin/sh -
 #
-#	$Id: rc.network,v 1.31 1998/09/15 10:49:02 jkoshy Exp $
+#	$Id: rc.network,v 1.32 1998/09/16 20:38:23 cracauer Exp $
 #	From: @(#)netstart	5.9 (Berkeley) 3/30/91
 
 # Note that almost all the user-configurable behavior is no longer in
@@ -25,6 +25,12 @@ network_pass1() {
     fi
     echo '.'
 
+    # Initial ATM interface configuration
+    if [ "X${atm_enable}" = X"YES" -a -f /etc/rc.atm ]; then
+	    . /etc/rc.atm
+	    atm_pass1
+    fi
+
     # Set up all the network interfaces, calling startup scripts if needed
     for ifn in ${network_interfaces}; do
 	    if [ -e /etc/start_if.${ifn} ]; then
@@ -89,6 +95,11 @@ network_pass1() {
 	fi
     fi
 
+    # Additional ATM interface configuration
+    if [ -n "${atm_pass1_done}" ]; then
+	    atm_pass2
+    fi
+
     # Configure routing
 
     if [ "x$defaultrouter" != "xNO" ] ; then
@@ -215,6 +226,11 @@ network_pass2() {
 	    echo -n ' rpc.ypupdated';	rpc.ypupdated
     fi
 
+    # Start ATM daemons
+    if [ -n "${atm_pass2_done}" ]; then
+	    atm_pass3
+    fi
+
     echo '.'
     network_pass2_done=YES
 }
diff --git a/etc/rc.d/network1 b/etc/rc.d/network1
index a6412a8..cf9ff66 100644
--- a/etc/rc.d/network1
+++ b/etc/rc.d/network1
@@ -1,6 +1,6 @@
 #!/bin/sh -
 #
-#	$Id: rc.network,v 1.31 1998/09/15 10:49:02 jkoshy Exp $
+#	$Id: rc.network,v 1.32 1998/09/16 20:38:23 cracauer Exp $
 #	From: @(#)netstart	5.9 (Berkeley) 3/30/91
 
 # Note that almost all the user-configurable behavior is no longer in
@@ -25,6 +25,12 @@ network_pass1() {
     fi
     echo '.'
 
+    # Initial ATM interface configuration
+    if [ "X${atm_enable}" = X"YES" -a -f /etc/rc.atm ]; then
+	    . /etc/rc.atm
+	    atm_pass1
+    fi
+
     # Set up all the network interfaces, calling startup scripts if needed
     for ifn in ${network_interfaces}; do
 	    if [ -e /etc/start_if.${ifn} ]; then
@@ -89,6 +95,11 @@ network_pass1() {
 	fi
     fi
 
+    # Additional ATM interface configuration
+    if [ -n "${atm_pass1_done}" ]; then
+	    atm_pass2
+    fi
+
     # Configure routing
 
     if [ "x$defaultrouter" != "xNO" ] ; then
@@ -215,6 +226,11 @@ network_pass2() {
 	    echo -n ' rpc.ypupdated';	rpc.ypupdated
     fi
 
+    # Start ATM daemons
+    if [ -n "${atm_pass2_done}" ]; then
+	    atm_pass3
+    fi
+
     echo '.'
     network_pass2_done=YES
 }
diff --git a/etc/rc.d/network2 b/etc/rc.d/network2
index a6412a8..cf9ff66 100644
--- a/etc/rc.d/network2
+++ b/etc/rc.d/network2
@@ -1,6 +1,6 @@
 #!/bin/sh -
 #
-#	$Id: rc.network,v 1.31 1998/09/15 10:49:02 jkoshy Exp $
+#	$Id: rc.network,v 1.32 1998/09/16 20:38:23 cracauer Exp $
 #	From: @(#)netstart	5.9 (Berkeley) 3/30/91
 
 # Note that almost all the user-configurable behavior is no longer in
@@ -25,6 +25,12 @@ network_pass1() {
     fi
     echo '.'
 
+    # Initial ATM interface configuration
+    if [ "X${atm_enable}" = X"YES" -a -f /etc/rc.atm ]; then
+	    . /etc/rc.atm
+	    atm_pass1
+    fi
+
     # Set up all the network interfaces, calling startup scripts if needed
     for ifn in ${network_interfaces}; do
 	    if [ -e /etc/start_if.${ifn} ]; then
@@ -89,6 +95,11 @@ network_pass1() {
 	fi
     fi
 
+    # Additional ATM interface configuration
+    if [ -n "${atm_pass1_done}" ]; then
+	    atm_pass2
+    fi
+
     # Configure routing
 
     if [ "x$defaultrouter" != "xNO" ] ; then
@@ -215,6 +226,11 @@ network_pass2() {
 	    echo -n ' rpc.ypupdated';	rpc.ypupdated
     fi
 
+    # Start ATM daemons
+    if [ -n "${atm_pass2_done}" ]; then
+	    atm_pass3
+    fi
+
     echo '.'
     network_pass2_done=YES
 }
diff --git a/etc/rc.d/network3 b/etc/rc.d/network3
index a6412a8..cf9ff66 100644
--- a/etc/rc.d/network3
+++ b/etc/rc.d/network3
@@ -1,6 +1,6 @@
 #!/bin/sh -
 #
-#	$Id: rc.network,v 1.31 1998/09/15 10:49:02 jkoshy Exp $
+#	$Id: rc.network,v 1.32 1998/09/16 20:38:23 cracauer Exp $
 #	From: @(#)netstart	5.9 (Berkeley) 3/30/91
 
 # Note that almost all the user-configurable behavior is no longer in
@@ -25,6 +25,12 @@ network_pass1() {
     fi
     echo '.'
 
+    # Initial ATM interface configuration
+    if [ "X${atm_enable}" = X"YES" -a -f /etc/rc.atm ]; then
+	    . /etc/rc.atm
+	    atm_pass1
+    fi
+
     # Set up all the network interfaces, calling startup scripts if needed
     for ifn in ${network_interfaces}; do
 	    if [ -e /etc/start_if.${ifn} ]; then
@@ -89,6 +95,11 @@ network_pass1() {
 	fi
     fi
 
+    # Additional ATM interface configuration
+    if [ -n "${atm_pass1_done}" ]; then
+	    atm_pass2
+    fi
+
     # Configure routing
 
     if [ "x$defaultrouter" != "xNO" ] ; then
@@ -215,6 +226,11 @@ network_pass2() {
 	    echo -n ' rpc.ypupdated';	rpc.ypupdated
     fi
 
+    # Start ATM daemons
+    if [ -n "${atm_pass2_done}" ]; then
+	    atm_pass3
+    fi
+
     echo '.'
     network_pass2_done=YES
 }
diff --git a/etc/rc.d/routing b/etc/rc.d/routing
index a6412a8..cf9ff66 100644
--- a/etc/rc.d/routing
+++ b/etc/rc.d/routing
@@ -1,6 +1,6 @@
 #!/bin/sh -
 #
-#	$Id: rc.network,v 1.31 1998/09/15 10:49:02 jkoshy Exp $
+#	$Id: rc.network,v 1.32 1998/09/16 20:38:23 cracauer Exp $
 #	From: @(#)netstart	5.9 (Berkeley) 3/30/91
 
 # Note that almost all the user-configurable behavior is no longer in
@@ -25,6 +25,12 @@ network_pass1() {
     fi
     echo '.'
 
+    # Initial ATM interface configuration
+    if [ "X${atm_enable}" = X"YES" -a -f /etc/rc.atm ]; then
+	    . /etc/rc.atm
+	    atm_pass1
+    fi
+
     # Set up all the network interfaces, calling startup scripts if needed
     for ifn in ${network_interfaces}; do
 	    if [ -e /etc/start_if.${ifn} ]; then
@@ -89,6 +95,11 @@ network_pass1() {
 	fi
     fi
 
+    # Additional ATM interface configuration
+    if [ -n "${atm_pass1_done}" ]; then
+	    atm_pass2
+    fi
+
     # Configure routing
 
     if [ "x$defaultrouter" != "xNO" ] ; then
@@ -215,6 +226,11 @@ network_pass2() {
 	    echo -n ' rpc.ypupdated';	rpc.ypupdated
     fi
 
+    # Start ATM daemons
+    if [ -n "${atm_pass2_done}" ]; then
+	    atm_pass3
+    fi
+
     echo '.'
     network_pass2_done=YES
 }
diff --git a/etc/rc.network b/etc/rc.network
index a6412a8..cf9ff66 100644
--- a/etc/rc.network
+++ b/etc/rc.network
@@ -1,6 +1,6 @@
 #!/bin/sh -
 #
-#	$Id: rc.network,v 1.31 1998/09/15 10:49:02 jkoshy Exp $
+#	$Id: rc.network,v 1.32 1998/09/16 20:38:23 cracauer Exp $
 #	From: @(#)netstart	5.9 (Berkeley) 3/30/91
 
 # Note that almost all the user-configurable behavior is no longer in
@@ -25,6 +25,12 @@ network_pass1() {
     fi
     echo '.'
 
+    # Initial ATM interface configuration
+    if [ "X${atm_enable}" = X"YES" -a -f /etc/rc.atm ]; then
+	    . /etc/rc.atm
+	    atm_pass1
+    fi
+
     # Set up all the network interfaces, calling startup scripts if needed
     for ifn in ${network_interfaces}; do
 	    if [ -e /etc/start_if.${ifn} ]; then
@@ -89,6 +95,11 @@ network_pass1() {
 	fi
     fi
 
+    # Additional ATM interface configuration
+    if [ -n "${atm_pass1_done}" ]; then
+	    atm_pass2
+    fi
+
     # Configure routing
 
     if [ "x$defaultrouter" != "xNO" ] ; then
@@ -215,6 +226,11 @@ network_pass2() {
 	    echo -n ' rpc.ypupdated';	rpc.ypupdated
     fi
 
+    # Start ATM daemons
+    if [ -n "${atm_pass2_done}" ]; then
+	    atm_pass3
+    fi
+
     echo '.'
     network_pass2_done=YES
 }
diff --git a/share/man/man5/rc.conf.5 b/share/man/man5/rc.conf.5
index d8f5a15..b41b088 100644
--- a/share/man/man5/rc.conf.5
+++ b/share/man/man5/rc.conf.5
@@ -22,7 +22,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.\"     $Id: rc.conf.5,v 1.21 1998/06/25 04:27:56 jkoshy Exp $
+.\"     $Id: rc.conf.5,v 1.22 1998/07/08 23:31:28 nectar Exp $
 .\"
 .Dd April 26, 1997
 .Dt RC.CONF 5
@@ -591,6 +591,97 @@ is set to
 these are the flags to pass to the
 .Xr rarpd 8
 daemon.
+.It Ar atm_enable
+(bool) Set to
+.Ar YES 
+to enable the configuration of ATM interfaces at system boot time.
+For all of the ATM variables described below, please refer to the
+.Xr atm 8
+man page for further details on the available command parameters.
+Also refer to the files in 
+.Pa /usr/share/examples/atm
+for more detailed configuration information.
+.It Ar atm_netif_<intf>
+(str) For the ATM physical interface 
+.Va <intf> , 
+this variable defines the name prefix and count for the ATM network interfaces to be created. 
+The value will be passed as the parameters of an 
+.Dq atm set netif Va <intf>
+command.
+.It Ar atm_sigmgr_<intf>
+(str) For the ATM physical interface 
+.Va <intf> , 
+this variable defines the ATM signalling manager to be used.
+The value will be passed as the parameters of an 
+.Dq atm attach Va <intf>
+command.
+.It Ar atm_prefix_<intf>
+(str) For the ATM physical interface 
+.Va <intf> , 
+this variable defines the NSAP prefix for interfaces using a UNI signalling 
+manager.  If set to
+.Em ILMI ,
+then the prefix will automatically be set via the 
+.Xr ilmid 8 
+daemon.  Otherwise, the value will be passed as the parameters of an 
+.Dq atm set prefix Va <intf>
+command.
+.It Ar atm_macaddr_<intf>
+(str) For the ATM physical interface 
+.Va <intf> , 
+this variable defines the MAC address for interfaces using a UNI signalling 
+manager.  If set to
+.Em NO ,
+then the hardware MAC address contained in the ATM interface card will be used.
+Otherwise, the value will be passed as the parameters of an 
+.Dq atm set mac Va <intf>
+command.
+.It Ar atm_arpserver_<netif>
+(str) For the ATM network interface 
+.Va <netif> , 
+this variable defines the ATM address for a host which is to provide ATMARP
+service.  This variable is only applicable to interfaces using a UNI signalling 
+manager.  If set to
+.Em local ,
+then this host will become an ATMARP server.
+The value will be passed as the parameters of an 
+.Dq atm set arpserver Va <netif>
+command.
+.It Ar atm_scsparp_<netif>
+(bool) If set to
+.Em YES ,
+then SCSP/ATMARP service for the network interface 
+.Va <netif> 
+will be initiated using the
+.Xr scspd 8
+and
+.Xr atmarpd 8
+daemons.  This variable is only applicable if 
+.So 
+.No atm_arpserver_ Ns Va <netif> 
+.No Ns = Ns Qq local
+.Sc 
+is defined.
+.It Ar atm_pvcs
+(str) Set to the list of ATM PVCs you would like to add at system
+boot time.  For each whitespace separated 
+.Em element 
+in the value, an 
+.No atm_pvc_ Ns Em element
+variable is assumed to exist.  The value of each of these variables 
+will be passed as the parameters of an 
+.Dq atm add pvc
+command.
+.It Ar atm_arps
+(str) Set to the list of permanent ATM ARP entries you would like to add 
+at system boot time.  For each whitespace separated 
+.Em element 
+in the value, an 
+.No atm_arp_ Ns Em element
+variable is assumed to exist.  The value of each of these variables 
+will be passed as the parameters of an 
+.Dq atm add arp
+command.
 .It Ar keymap
 (str) If set to
 .Ar NO
@@ -832,6 +923,7 @@ on system operation.
 .Xr accton 8 ,
 .Xr amd 8 ,
 .Xr apm 8 ,
+.Xr atm 8 ,
 .Xr cron 8 ,
 .Xr gated 8 ,
 .Xr ifconfig 8 ,
diff --git a/share/man/man8/rc.8 b/share/man/man8/rc.8
index bbce975..88dfe6c 100644
--- a/share/man/man8/rc.8
+++ b/share/man/man8/rc.8
@@ -30,7 +30,7 @@
 .\" SUCH DAMAGE.
 .\"
 .\"     @(#)rc.8	8.2 (Berkeley) 12/11/93
-.\"	$Id: rc.8,v 1.3 1997/03/07 03:28:21 jmg Exp $
+.\"	$Id: rc.8,v 1.4 1998/02/26 02:44:17 jkh Exp $
 .\"
 .Dd December 11, 1993
 .Dt RC 8
@@ -46,6 +46,7 @@
 .Nm rc.pccard
 .Nm rc.network
 .Nm rc.firewall
+.Nm rc.atm
 .Nm rc.<arch>
 .Nm rc.local
 .Nm rc.shutdown
@@ -127,6 +128,14 @@ disables the loading of firewall rules.
 will load the rules in the given filename (full path required).
 .El
 .Pp
+.Nm Rc.atm
+is used to configure ATM network interfaces.
+The interfaces are configured in three passes.
+The first pass performs the initial interface configuration.
+The second pass completes the interface configuration and defines PVCs and
+permanent ATMARP entries.
+The third pass starts any ATM daemons.
+.Pp
 .Nm Rc.<arch>
 runs architecture specific programs.
 .Pp