diff options
author | phk <phk@FreeBSD.org> | 1994-08-19 00:01:08 +0000 |
---|---|---|
committer | phk <phk@FreeBSD.org> | 1994-08-19 00:01:08 +0000 |
commit | a8a9b8d89bccc8d87a7b579545c9c08e763fe17e (patch) | |
tree | e9961c05822a29ee65a755deb9cb5157ee9b41d4 | |
parent | 3fcf3cf41df453b55f9b3061abf79f0f2c1ebb64 (diff) | |
download | FreeBSD-src-a8a9b8d89bccc8d87a7b579545c9c08e763fe17e.zip FreeBSD-src-a8a9b8d89bccc8d87a7b579545c9c08e763fe17e.tar.gz |
Added my ProAudioSpectum SCSI driver for cards with the 5380 SCSI-chip.
This is the slowest and most stupid of our SCSI-drivers, but it is there
and it works. It has been tested with CD-ROM and disk.
It uses no interrupts, no DMA, just polled I/0.
Transfer-rate is <= 100Kbyte/sec.
If you set the jumpers on the board, you can change the unit-number and
you will be able to have four of these co-exist in one computer, why one
would do that is somewhat unclear though.
If I ever get my hand on the docs for this, I will improve it of course,
but for now we can install and access those CD-ROMs.
-rw-r--r-- | sys/conf/NOTES | 8 | ||||
-rw-r--r-- | sys/conf/files.i386 | 3 | ||||
-rw-r--r-- | sys/i386/conf/GENERICAH | 3 | ||||
-rw-r--r-- | sys/i386/conf/LINT | 8 | ||||
-rw-r--r-- | sys/i386/conf/NOTES | 8 | ||||
-rw-r--r-- | sys/i386/conf/files.i386 | 3 | ||||
-rw-r--r-- | sys/i386/isa/ic/ncr_5380.h | 130 | ||||
-rw-r--r-- | sys/i386/isa/pas.c | 1011 |
8 files changed, 1168 insertions, 6 deletions
diff --git a/sys/conf/NOTES b/sys/conf/NOTES index 90c79b8..75ff641 100644 --- a/sys/conf/NOTES +++ b/sys/conf/NOTES @@ -4,7 +4,7 @@ # # This kernel is NOT MEANT to be runnable! # -# $Id: LINT,v 1.70 1994/05/17 23:20:32 jkh Exp $ +# $Id: LINT,v 1.71 1994/05/18 16:23:25 jkh Exp $ # machine "i386" @@ -158,6 +158,12 @@ device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr # Driver for Logitech and ATI inport bus mice device mse0 at isa? port 0x23c tty irq 5 vector mseintr device npx0 at isa? port "IO_NPX" irq 13 vector npxintr +# Driver for ProAudioSpectrum SCSI, on cards with NCR 5380 chips. +# The four units correspond to the HW-jumpers. No intr, No DMA, very slow. +device pas0 at isa? port 0x1f88 +device pas1 at isa? port 0x1f84 +device pas2 at isa? port 0x1f8c +device pas3 at isa? port 0x1e88 device pc0 at isa? port "IO_KBD" tty irq 1 vector pcrint #only one of pc0 or sc0 allowed #device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr diff --git a/sys/conf/files.i386 b/sys/conf/files.i386 index b7a8604..1c744ee 100644 --- a/sys/conf/files.i386 +++ b/sys/conf/files.i386 @@ -1,7 +1,7 @@ # This file tells config what files go into building a kernel, # files marked standard are always included. # -# $Id: files.i386,v 1.34 1994/05/25 08:52:02 rgrimes Exp $ +# $Id: files.i386,v 1.35 1994/08/12 06:51:02 davidg Exp $ # i386/i386/autoconf.c standard device-driver i386/i386/cons.c standard @@ -38,6 +38,7 @@ i386/isa/lpt.c optional lpt device-driver i386/isa/mcd.c optional mcd device-driver i386/isa/mse.c optional mse device-driver i386/isa/npx.c optional npx device-driver +i386/isa/pas.c optional pas device-driver i386/isa/syscons.c optional sc device-driver i386/isa/pccons.c optional pc device-driver i386/isa/pcaudio.c optional pca device-driver diff --git a/sys/i386/conf/GENERICAH b/sys/i386/conf/GENERICAH index 720cd88..3818f1d 100644 --- a/sys/i386/conf/GENERICAH +++ b/sys/i386/conf/GENERICAH @@ -1,7 +1,7 @@ # # GENERICAH -- Generic machine with WD/AHx family disks # -# $Id: GENERICAH,v 1.35 1994/07/28 05:53:43 davidg Exp $ +# $Id: GENERICAH,v 1.36 1994/08/09 08:17:08 davidg Exp $ # machine "i386" @@ -70,6 +70,7 @@ device cd0 #Only need one of these, the code dynamically grows device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr +device pas0 at isa? port 0x1f88 bio device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr device npx0 at isa? port "IO_NPX" irq 13 vector npxintr diff --git a/sys/i386/conf/LINT b/sys/i386/conf/LINT index 90c79b8..75ff641 100644 --- a/sys/i386/conf/LINT +++ b/sys/i386/conf/LINT @@ -4,7 +4,7 @@ # # This kernel is NOT MEANT to be runnable! # -# $Id: LINT,v 1.70 1994/05/17 23:20:32 jkh Exp $ +# $Id: LINT,v 1.71 1994/05/18 16:23:25 jkh Exp $ # machine "i386" @@ -158,6 +158,12 @@ device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr # Driver for Logitech and ATI inport bus mice device mse0 at isa? port 0x23c tty irq 5 vector mseintr device npx0 at isa? port "IO_NPX" irq 13 vector npxintr +# Driver for ProAudioSpectrum SCSI, on cards with NCR 5380 chips. +# The four units correspond to the HW-jumpers. No intr, No DMA, very slow. +device pas0 at isa? port 0x1f88 +device pas1 at isa? port 0x1f84 +device pas2 at isa? port 0x1f8c +device pas3 at isa? port 0x1e88 device pc0 at isa? port "IO_KBD" tty irq 1 vector pcrint #only one of pc0 or sc0 allowed #device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr diff --git a/sys/i386/conf/NOTES b/sys/i386/conf/NOTES index 90c79b8..75ff641 100644 --- a/sys/i386/conf/NOTES +++ b/sys/i386/conf/NOTES @@ -4,7 +4,7 @@ # # This kernel is NOT MEANT to be runnable! # -# $Id: LINT,v 1.70 1994/05/17 23:20:32 jkh Exp $ +# $Id: LINT,v 1.71 1994/05/18 16:23:25 jkh Exp $ # machine "i386" @@ -158,6 +158,12 @@ device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr # Driver for Logitech and ATI inport bus mice device mse0 at isa? port 0x23c tty irq 5 vector mseintr device npx0 at isa? port "IO_NPX" irq 13 vector npxintr +# Driver for ProAudioSpectrum SCSI, on cards with NCR 5380 chips. +# The four units correspond to the HW-jumpers. No intr, No DMA, very slow. +device pas0 at isa? port 0x1f88 +device pas1 at isa? port 0x1f84 +device pas2 at isa? port 0x1f8c +device pas3 at isa? port 0x1e88 device pc0 at isa? port "IO_KBD" tty irq 1 vector pcrint #only one of pc0 or sc0 allowed #device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr diff --git a/sys/i386/conf/files.i386 b/sys/i386/conf/files.i386 index b7a8604..1c744ee 100644 --- a/sys/i386/conf/files.i386 +++ b/sys/i386/conf/files.i386 @@ -1,7 +1,7 @@ # This file tells config what files go into building a kernel, # files marked standard are always included. # -# $Id: files.i386,v 1.34 1994/05/25 08:52:02 rgrimes Exp $ +# $Id: files.i386,v 1.35 1994/08/12 06:51:02 davidg Exp $ # i386/i386/autoconf.c standard device-driver i386/i386/cons.c standard @@ -38,6 +38,7 @@ i386/isa/lpt.c optional lpt device-driver i386/isa/mcd.c optional mcd device-driver i386/isa/mse.c optional mse device-driver i386/isa/npx.c optional npx device-driver +i386/isa/pas.c optional pas device-driver i386/isa/syscons.c optional sc device-driver i386/isa/pccons.c optional pc device-driver i386/isa/pcaudio.c optional pca device-driver diff --git a/sys/i386/isa/ic/ncr_5380.h b/sys/i386/isa/ic/ncr_5380.h new file mode 100644 index 0000000..1effe49 --- /dev/null +++ b/sys/i386/isa/ic/ncr_5380.h @@ -0,0 +1,130 @@ +/* + * Mach Operating System + * Copyright (c) 1991,1990,1989 Carnegie Mellon University + * All Rights Reserved. + * + * Permission to use, copy, modify and distribute this software and its + * documentation is hereby granted, provided that both the copyright + * notice and this permission notice appear in all copies of the + * software, derivative works or modified versions, and any portions + * thereof, and that both notices appear in supporting documentation. + * + * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS + * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR + * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. + * + * Carnegie Mellon requests users of this software to return to + * + * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU + * School of Computer Science + * Carnegie Mellon University + * Pittsburgh PA 15213-3890 + * + * any improvements or extensions that they make and grant Carnegie the + * rights to redistribute these changes. + */ + +#ifndef _IC_NCR_5380_H_ +#define _IC_NCR_5380_H_ + +/* + * Register map + */ + +typedef struct { + volatile u_char sci_data; /* r: Current data */ +#define sci_odata sci_data /* w: Out data */ + + volatile u_char sci_icmd; /* rw:Initiator command */ + + volatile u_char sci_mode; /* rw:Mode */ + + volatile u_char sci_tcmd; /* rw:Target command */ + + volatile u_char sci_bus_csr;/* r: Bus Status */ +#define sci_sel_enb sci_bus_csr /* w: Select enable */ + + volatile u_char sci_csr; /* r: Status */ +#define sci_dma_send sci_csr /* w: Start dma send data */ + + volatile u_char sci_idata; /* r: Input data */ +#define sci_trecv sci_idata /* w: Start dma recv, target */ + + volatile u_char sci_iack; /* r: Interrupt Acknowledge */ +#define sci_irecv sci_iack /* w: Start dma recv, initiator */ +} sci_regmap_t; + + +/* + * Initiator command register + */ + +#define SCI_ICMD_DATA 0x01 /* rw:Assert data bus */ +#define SCI_ICMD_ATN 0x02 /* rw:Assert ATN signal */ +#define SCI_ICMD_SEL 0x04 /* rw:Assert SEL signal */ +#define SCI_ICMD_BSY 0x08 /* rw:Assert BSY signal */ +#define SCI_ICMD_ACK 0x10 /* rw:Assert ACK signal */ +#define SCI_ICMD_LST 0x20 /* r: Lost arbitration */ +#define SCI_ICMD_DIFF SCI_ICMD_LST /* w: Differential cable */ +#define SCI_ICMD_AIP 0x40 /* r: Arbitration in progress */ +#define SCI_ICMD_TEST SCI_ICMD_AIP /* w: Test mode */ +#define SCI_ICMD_RST 0x80 /* rw:Assert RST signal */ + + +/* + * Mode register + */ + +#define SCI_MODE_ARB 0x01 /* rw: Start arbitration */ +#define SCI_MODE_DMA 0x02 /* rw: Enable DMA xfers */ +#define SCI_MODE_MONBSY 0x04 /* rw: Monitor BSY signal */ +#define SCI_MODE_DMA_IE 0x08 /* rw: Enable DMA complete interrupt */ +#define SCI_MODE_PERR_IE 0x10 /* rw: Interrupt on parity errors */ +#define SCI_MODE_PAR_CHK 0x20 /* rw: Check parity */ +#define SCI_MODE_TARGET 0x40 /* rw: Target mode (Initiator if 0) */ +#define SCI_MODE_BLOCKDMA 0x80 /* rw: Block-mode DMA handshake (MBZ) */ + + +/* + * Target command register + */ + +#define SCI_TCMD_IO 0x01 /* rw: Assert I/O signal */ +#define SCI_TCMD_CD 0x02 /* rw: Assert C/D signal */ +#define SCI_TCMD_MSG 0x04 /* rw: Assert MSG signal */ +#define SCI_TCMD_PHASE_MASK 0x07 /* r: Mask for current bus phase */ +#define SCI_TCMD_REQ 0x08 /* rw: Assert REQ signal */ +#define SCI_TCMD_LAST_SENT 0x80 /* ro: Last byte was xferred + * (not on 5380/1) */ + +#define SCI_PHASE(x) SCSI_PHASE(x) + +/* + * Current (SCSI) Bus status + */ + +#define SCI_BUS_DBP 0x01 /* r: Data Bus parity */ +#define SCI_BUS_SEL 0x02 /* r: SEL signal */ +#define SCI_BUS_IO 0x04 /* r: I/O signal */ +#define SCI_BUS_CD 0x08 /* r: C/D signal */ +#define SCI_BUS_MSG 0x10 /* r: MSG signal */ +#define SCI_BUS_REQ 0x20 /* r: REQ signal */ +#define SCI_BUS_BSY 0x40 /* r: BSY signal */ +#define SCI_BUS_RST 0x80 /* r: RST signal */ + +#define SCI_CUR_PHASE(x) SCSI_PHASE((x)>>2) + +/* + * Bus and Status register + */ + +#define SCI_CSR_ACK 0x01 /* r: ACK signal */ +#define SCI_CSR_ATN 0x02 /* r: ATN signal */ +#define SCI_CSR_DISC 0x04 /* r: Disconnected (BSY==0) */ +#define SCI_CSR_PHASE_MATCH 0x08 /* r: Bus and SCI_TCMD match */ +#define SCI_CSR_INT 0x10 /* r: Interrupt request */ +#define SCI_CSR_PERR 0x20 /* r: Parity error */ +#define SCI_CSR_DREQ 0x40 /* r: DMA request */ +#define SCI_CSR_DONE 0x80 /* r: DMA count is zero */ + +#endif /* _IC_NCR_5380_H_ */ diff --git a/sys/i386/isa/pas.c b/sys/i386/isa/pas.c new file mode 100644 index 0000000..e0bbbc0 --- /dev/null +++ b/sys/i386/isa/pas.c @@ -0,0 +1,1011 @@ +/*- + * Copyright (C) 1993 Allen K. Briggs, Chris P. Caputo, + * Michael L. Finch, Bradley A. Grantham, and + * Lawrence A. Kesteloot + * Copyright (C) 1994 Poul-Henning Kamp + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the Alice Group. + * 4. The names of the Alice Group or any of its members may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE ALICE GROUP ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE ALICE GROUP BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * $Id: pas.c,v 1.8.2.1 1994/07/11 00:02:32 cgd Exp $ + * + */ + +/* Modified for use with the pc532 by Phil Nelson, Feb 94. + * Modified for use with MediaVision ProAudioSpectrum type adapters + * under FreeBSD by Poul-Henning Kamp, + */ + + +#include "pas.h" +#if NPAS > 0 +#include "types.h" +#include "param.h" +#include "systm.h" +#include "conf.h" +#include "file.h" +#include "buf.h" +#include "stat.h" +#include "uio.h" +#include "ioctl.h" +#include "cdio.h" +#include "errno.h" +#include "dkbad.h" +#include "disklabel.h" +#include "icu.h" +#include "i386/isa/isa.h" +#include "i386/isa/isa_device.h" +#include <scsi/scsi_all.h> +#include <scsi/scsiconf.h> +#include "ic/ncr_5380.h" + +/* What we need to debug the driver */ + +#ifdef PAS_DEBUG +static int pas_show_scsi_cmd(struct scsi_xfer *xs); +#define HERE() printf("<%d>",__LINE__) +#define ARGH() printf("[%d]",__LINE__) +#else /* PAS_DEBUG */ +#define HERE() /**/ +#define ARGH() /**/ +#endif /* PAS_DEBUG */ + +#define SCSI_PHASE_DATA_OUT 0x0 +#define SCSI_PHASE_DATA_IN 0x1 +#define SCSI_PHASE_CMD 0x2 +#define SCSI_PHASE_STATUS 0x3 +#define SCSI_PHASE_UNSPEC1 0x4 +#define SCSI_PHASE_UNSPEC2 0x5 +#define SCSI_PHASE_MESSAGE_OUT 0x6 +#define SCSI_PHASE_MESSAGE_IN 0x7 + +#define SCSI_PHASE(x) ((x)&0x7) + +#define SCSI_RET_SUCCESS 0 +#define SCSI_RET_RETRY 1 +#define SCSI_RET_DEVICE_DOWN 2 +#define SCSI_RET_COMMAND_FAIL 3 + +/* Our per device (card) structure */ +static +struct pas_softc { + struct scsi_link sc_link; + int mv_unit; + u_short iobase; +#define sci_data(ptr) (ptr->iobase+0x0) +#define sci_icmd(ptr) (ptr->iobase+0x1) +#define sci_mode(ptr) (ptr->iobase+0x2) +#define sci_tcmd(ptr) (ptr->iobase+0x3) +#define sci_bus_csr(ptr) (ptr->iobase+0x2000) +#define sci_csr(ptr) (ptr->iobase+0x2001) +#define sci_idata(ptr) (ptr->iobase+0x2002) +#define sci_iack(ptr) (ptr->iobase+0x2003) +#define sci_pdmadata(ptr) (ptr->iobase+0x4000) +#define sci_pdmastat(ptr) (ptr->iobase+0x4001) +} s_pas[NPAS]; + +/* Our access to the 5380 chip */ +#define P_PAS struct pas_softc * +#define R_PAS(ptr,foo) inb(foo(ptr)) +#define W_PAS(ptr,foo,val) outb(foo(ptr),val) +#define M_PAS(ptr,foo,opr,arg) outb(foo(ptr),R_PAS(ptr,foo) opr arg) +#define PSEUDO_DMA 0 +#if PSEUDO_DMA +/* +static int sci_pdma_out(P_PAS, int, int, u_char *); +*/ +#define sci_pdma_out sci_data_out +static int sci_pdma_in(P_PAS, int, int, u_char *); + +#else /* PSEUDO_DMA */ +#define sci_pdma_out sci_data_out +#define sci_pdma_in sci_data_in +#endif /* PSEUDO_DMA */ + + + +static int pas_foo; +#define SCI_CLR_INTR(ptr) {pas_foo += R_PAS(ptr,sci_iack);} +#define SCI_PHASE_DISC 0 /* sort of ... */ +#define SCI_ACK(ptr,phase) {W_PAS(ptr,sci_tcmd,phase);} +#define SCSI_TIMEOUT_VAL 10000000 +#define WAIT_FOR_NOT_REQ(ptr) { \ + int scsi_timeout = SCSI_TIMEOUT_VAL; \ + while ( (R_PAS(ptr,sci_bus_csr) & SCI_BUS_REQ) && \ + (R_PAS(ptr,sci_bus_csr) & SCI_BUS_REQ) && \ + (R_PAS(ptr,sci_bus_csr) & SCI_BUS_REQ) && \ + (--scsi_timeout) ); \ + if (!scsi_timeout) { \ + printf("scsi timeout--WAIT_FOR_NOT_REQ-- pas.c:%d.\n", __LINE__); \ + goto scsi_timeout_error; \ + } \ +} +#define WAIT_FOR_REQ(ptr) { \ + int scsi_timeout = SCSI_TIMEOUT_VAL; \ + while ( ((R_PAS(ptr,sci_bus_csr) & SCI_BUS_REQ) == 0) && \ + ((R_PAS(ptr,sci_bus_csr) & SCI_BUS_REQ) == 0) && \ + ((R_PAS(ptr,sci_bus_csr) & SCI_BUS_REQ) == 0) && \ + (--scsi_timeout) ); \ + if (!scsi_timeout) { \ + printf("scsi timeout--WAIT_FOR_REQ-- pas.c:%d.\n", __LINE__); \ + goto scsi_timeout_error; \ + } \ +} +#define WAIT_FOR_BSY(ptr) { \ + int scsi_timeout = SCSI_TIMEOUT_VAL; \ + while ( ((R_PAS(ptr,sci_bus_csr) & SCI_BUS_BSY) == 0) && \ + ((R_PAS(ptr,sci_bus_csr) & SCI_BUS_BSY) == 0) && \ + ((R_PAS(ptr,sci_bus_csr) & SCI_BUS_BSY) == 0) && \ + (--scsi_timeout) ); \ + if (!scsi_timeout) { \ + printf("scsi timeout--WAIT_FOR_BSY-- pas.c:%d.\n", __LINE__); \ + goto scsi_timeout_error; \ + } \ +} + +static u_int32 pas_adapter_info(int adapter_number); +static void pas_minphys(struct buf *bp); +static int32 pas_scsi_cmd(struct scsi_xfer *xs); + +static int pas_reset_target(int adapter, int target); +static int pas_poll(int adapter, int timeout); +static int pas_send_cmd(struct scsi_xfer *xs); +static int scsi_req(P_PAS,int,int,u_char *,int, + u_char *, int , int *, int *); + +static int scsi_group0(int adapter, int id, int lun, + int opcode, int addr, int len, + int flags, caddr_t databuf, int datalen); + +static int sci_data_out(P_PAS, int, int, u_char *); +static int sci_data_in(P_PAS, int, int, u_char *); + +extern int pasprobe(struct isa_device *dev); +extern int pasattach(struct isa_device *dev); +struct isa_driver pasdriver = { pasprobe, pasattach, "pas" }; + + +static +struct scsi_adapter pas_adapter = { + pas_scsi_cmd, /* scsi_cmd() */ + pas_minphys, /* scsi_minphys() */ + 0, /* open_target_lu() */ + 0, /* close_target_lu() */ + pas_adapter_info, /* adapter_info() */ +"pas", /* name */ + { 0, 0 } /* spare[2] */ +}; + +static +struct scsi_device pas_dev = { + NULL, /* Use default error handler. */ + NULL, /* have a queue, served by this (?) */ + NULL, /* have no async handler. */ + NULL, /* Use default "done" routine. */ + "pas", + 0, + { 0, 0 } +}; + +static char *mv_type[] = { "?" "PAS","PAS+","CDPC","PAS16C","PAS16D" }; + + +int +pasprobe(struct isa_device *dev) +{ + int port = dev->id_iobase; + int base = port - 0x1c00; + int unit = dev->id_unit; + int i, j; + + /* Tell the PAS16 we want to talk to, where to listen */ + outb(0x9a01,0xbc + unit); + outb(0x9a01,base >> 2); + + /* Various magic */ + outb(base+0x4000,0x30); + outb(base+0x4001,0x01); + outb(base+0xbc00,0x01); + + /* Killer one */ + i = inb(base + 0x803); + if(i == 0xff) return 0; + + /* killer two */ + outb(base+0x803,i ^ 0xe0); + j = inb(base + 0x803); + outb(base+0x803,1); + if(i != j) return 0; + + /* killer three */ + if((0x03 & inb(base+0xec03)) != 0x03) return 0; + + /* killer four */ + for(i=0;i<4;i++) { + if(inb(port) != 0xff || inb(port+0x2000) != 0xff) + return 1; + } + return 0; +} + +static u_int32 +pas_adapter_info(int adapter_number) +{ + return 1; +} + +int +pasattach(struct isa_device *dev) +{ + int i,j; + struct pas_softc *ppas; + i = inb(dev->id_iobase - 0x1c00 + 0xFC00) >> 5; + if(i >= (sizeof mv_type / sizeof *mv_type)) + j=0; + else + j = i+1; + printf("pas%d: Type = %d <%s>\n",dev->id_unit,i,mv_type[j]); + ppas = s_pas + dev->id_unit; + ppas->sc_link.adapter_unit = dev->id_unit; + ppas->sc_link.adapter_targ = 7; + ppas->sc_link.adapter = &pas_adapter; + ppas->sc_link.device = &pas_dev; + ppas->iobase=dev->id_iobase; +#ifdef STILL_NO_INTR +/* As of yet we havn't bothered with interrupts, so don't bother */ + j = inb(dev->id_iobase - 0x1c00 + 0xf002); + switch (dev->id_irq) { + case IRQ2: i=1; break; + case IRQ3: i=2; break; + case IRQ4: i=3; break; + case IRQ5: i=4; break; + case IRQ6: i=5; break; + case IRQ7: i=6; break; + case IRQ10: i=7; break; + case IRQ11: i=8; break; + case IRQ12: i=9; break; + case IRQ14: i=10; break; + case IRQ15: i=11; break; + default: + printf("Intr %d unknown\n",dev->id_irq); + panic("brag!"); + } + printf("0xf002 irq%d code=%x, before %x,",dev->id_irq,i,j); + j &= 0x0f; + j |= (i << 4); + printf(" after= %x \n",j); + outb(dev->id_iobase - 0x1c00 + 0xf002,j); + outb(dev->id_iobase - 0x1c00 + 0x8003,0x4d); +#endif /* STILL_NO_INTR */ + scsi_attachdevs(&(ppas->sc_link)); + return 1; +} + +static void +pas_minphys(struct buf *bp) +{ +#define MIN_PHYS 65536 /*BARF!!!!*/ + if (bp->b_bcount > MIN_PHYS) { + printf("Uh-oh... pas_minphys setting bp->b_bcount = %x.\n", MIN_PHYS); + bp->b_bcount = MIN_PHYS; + } +#undef MIN_PHYS +} + +static int32 +pas_scsi_cmd(struct scsi_xfer *xs) +{ + int flags, s, r; + + flags = xs->flags; + if (xs->bp) flags |= (SCSI_NOSLEEP); + if ( flags & ITSDONE ) { + printf("Already done?"); + xs->flags &= ~ITSDONE; + } + if ( ! ( flags & INUSE ) ) { + printf("Not in use?"); + xs->flags |= INUSE; + } + + if ( flags & SCSI_RESET ) { + printf("flags & SCSIRESET.\n"); + if ( ! ( flags & SCSI_NOSLEEP ) ) { + s = splbio(); + pas_reset_target(xs->sc_link->adapter_unit, + xs->sc_link->target); + splx(s); + return(SUCCESSFULLY_QUEUED); + } else { + pas_reset_target(xs->sc_link->adapter_unit, xs->sc_link->target); + if (pas_poll(xs->sc_link->adapter_unit, xs->timeout)) { + return (HAD_ERROR); + } + return (COMPLETE); + } + } + /* + * OK. Now that that's over with, let's pack up that + * SCSI puppy and send it off. If we can, we'll just + * queue and go; otherwise, we'll wait for the command + * to finish. + if ( ! ( flags & SCSI_NOSLEEP ) ) { + s = splbio(); + pas_send_cmd(xs); + splx(s); + return(SUCCESSFULLY_QUEUED); + } + */ + + r = pas_send_cmd(xs); + xs->flags |= ITSDONE; + scsi_done(xs); + if (xs->flags&SCSI_NOMASK) { + return (r); + } + return SUCCESSFULLY_QUEUED; +} + +#ifdef PAS_DEBUG +static int +pas_show_scsi_cmd(struct scsi_xfer *xs) +{ + u_char *b = (u_char *) xs->cmd; + int i = 0; + + if ( ! ( xs->flags & SCSI_RESET ) ) { + printf("pas(%d:%d:%d) ", + xs->sc_link->adapter_unit, xs->sc_link->target, xs->sc_link->lun); + printf("%d@%x, %d@%x <",xs->cmdlen,xs->cmd,xs->datalen,xs->data); + while (i < xs->cmdlen) { + if (i) printf(","); + printf("%x",b[i++]); + } + printf(">\n"); + } else { + printf("pas(%d:%d:%d)-RESET-\n", + xs->sc_link->adapter_unit, xs->sc_link->target, + xs->sc_link->lun); + } + return 0; +} +#endif /* PAS_DEBUG */ + +/* + * Actual chip control. + */ + +extern void +pasintr(int adapter) +{ + struct pas_softc *ppas = s_pas + adapter; + printf ("pasintr\n"); + SCI_CLR_INTR(ppas); + W_PAS(ppas,sci_mode,0x00); +} + +#if PHK +extern int +scsi_irq_intr(void) +{ + +/* if (R_PAS(ptr,sci_csr) != SCI_CSR_PHASE_MATCH) + printf("scsi_irq_intr called (not just phase match -- " + "csr = 0x%x, bus_csr = 0x%x).\n", + R_PAS(ptr,sci_csr), R_PAS(ptr,sci_bus_csr)); + pas_intr(0); */ + return 1; +} +#endif + +static int +pas_reset_target(int adapter, int target) +{ + struct pas_softc *ppas = s_pas + adapter; + + W_PAS(ppas,sci_icmd,SCI_ICMD_TEST); + W_PAS(ppas,sci_icmd,SCI_ICMD_TEST | SCI_ICMD_RST); + DELAY(2500); + W_PAS(ppas,sci_icmd,0); + + W_PAS(ppas,sci_mode,0); + W_PAS(ppas,sci_tcmd,SCI_PHASE_DISC); + W_PAS(ppas,sci_sel_enb,0); + + SCI_CLR_INTR(ppas); + SCI_CLR_INTR(ppas); + return 0; +} + +static int +pas_poll(int adapter, int timeout) +{ + return 0; +} + +static int +pas_send_cmd(struct scsi_xfer *xs) +{ + P_PAS ptr = s_pas + xs->sc_link->adapter_unit; + int s,sent,ret; + int sense; + +#ifdef PAS_DEBUG + pas_show_scsi_cmd(xs); +#endif /* PAS_DEBUG */ + s = splbio(); + sense = scsi_req(ptr, + xs->sc_link->target, xs->sc_link->lun, + (u_char*)xs->cmd, xs->cmdlen, xs->data, xs->datalen, + &sent, &ret); + splx(s); +#ifdef PAS_DEBUG +HERE(); + printf("sent=%d,ret=%d,sense=%x ",sent,ret,sense); +#endif /* PAS_DEBUG */ + switch (sense) { + case 0x00: + xs->error = XS_NOERROR; + xs->resid = sent; +#ifdef PAS_DEBUG + printf("\n"); +#endif /* PAS_DEBUG */ + return (COMPLETE); + case 0x02: /* Check condition */ +#ifdef PAS_DEBUG + printf("check cond. targ= %d.\n", xs->sc_link->target); +#endif + spinwait(10); + s = splbio(); + scsi_group0(xs->sc_link->adapter_unit, + xs->sc_link->target, xs->sc_link->lun, + 0x3, 0x0, + sizeof(struct scsi_sense_data), + 0, (caddr_t) &(xs->sense), + sizeof(struct scsi_sense_data)); + splx(s); + xs->error = XS_SENSE; + return HAD_ERROR; + case 0x08: /* Busy */ +ARGH(); + xs->error = XS_BUSY; + return HAD_ERROR; + default: +ARGH(); + xs->error = XS_DRIVER_STUFFUP; + return HAD_ERROR; + } +} + +static int +select_target(P_PAS ptr, u_char myid, u_char tid, int with_atn) +{ + register u_char bid, icmd; + int ret = SCSI_RET_RETRY; + if ((R_PAS(ptr,sci_bus_csr) & (SCI_BUS_BSY|SCI_BUS_SEL)) && + (R_PAS(ptr,sci_bus_csr) & (SCI_BUS_BSY|SCI_BUS_SEL)) && + (R_PAS(ptr,sci_bus_csr) & (SCI_BUS_BSY|SCI_BUS_SEL))) + return ret; + + /* for our purposes.. */ + myid = 1 << myid; + tid = 1 << tid; + + W_PAS(ptr,sci_sel_enb,0); /* we don't want any interrupts. */ + W_PAS(ptr,sci_tcmd,0); /* get into a harmless state */ + W_PAS(ptr,sci_mode,0); /* get into a harmless state */ + + W_PAS(ptr,sci_odata,myid); + W_PAS(ptr,sci_mode,SCI_MODE_ARB); + + /* AIP might not set if BSY went true after we checked */ + for (bid = 0; bid < 20; bid++) /* 20usec circa */ + if (R_PAS(ptr,sci_icmd) & SCI_ICMD_AIP) + break; + if ((R_PAS(ptr,sci_icmd) & SCI_ICMD_AIP) == 0) { +ARGH(); + goto lost; + } + + spinwait(2 /* was 2 */); /* 2.2us arb delay */ + + if (R_PAS(ptr,sci_icmd) & SCI_ICMD_LST) { +printf ("lost 1\n"); + goto lost; + } + + M_PAS(ptr,sci_mode,&, ~SCI_MODE_PAR_CHK); + bid = R_PAS(ptr,sci_data); + + if ((bid & ~myid) > myid) { +printf ("lost 2\n"); + goto lost; + } + if (R_PAS(ptr,sci_icmd) & SCI_ICMD_LST) { +printf ("lost 3\n"); + goto lost; + } + + /* Won arbitration, enter selection phase now */ + icmd = R_PAS(ptr,sci_icmd) & ~(SCI_ICMD_DIFF|SCI_ICMD_TEST); + icmd |= (with_atn ? (SCI_ICMD_SEL|SCI_ICMD_ATN) : SCI_ICMD_SEL); + icmd |= SCI_ICMD_BSY; + W_PAS(ptr,sci_icmd,icmd); + + if (R_PAS(ptr,sci_icmd) & SCI_ICMD_LST) { +printf ("nosel\n"); + goto nosel; + } + + /* XXX a target that violates specs might still drive the bus XXX */ + /* XXX should put our id out, and after the delay check nothi XXX */ + /* XXX ng else is out there. XXX */ + + DELAY(0); + + W_PAS(ptr,sci_tcmd,0); + W_PAS(ptr,sci_odata,myid|tid); + W_PAS(ptr,sci_sel_enb,0); + + M_PAS(ptr,sci_mode, &, ~SCI_MODE_ARB); /* 2 deskew delays, too */ + W_PAS(ptr,sci_mode,0); + + icmd |= SCI_ICMD_DATA; + icmd &= ~(SCI_ICMD_BSY); + + W_PAS(ptr,sci_icmd,icmd); + + /* bus settle delay, 400ns */ + DELAY(2); /* too much (was 2) ? */ + +/* M_PAS(ptr,sci_mode, |, SCI_MODE_PAR_CHK); */ + + { + register int timeo = 2500;/* 250 msecs in 100 usecs chunks */ + while ((R_PAS(ptr,sci_bus_csr) & SCI_BUS_BSY) == 0) { + if (--timeo > 0) { + DELAY(100); + } else { +ARGH(); + goto nodev; + } + } + } + + icmd &= ~(SCI_ICMD_DATA|SCI_ICMD_SEL); + W_PAS(ptr,sci_icmd,icmd); +/* ptr->sci_sel_enb = myid;*/ /* looks like we should NOT have it */ + return SCSI_RET_SUCCESS; +nodev: + ret = SCSI_RET_DEVICE_DOWN; + W_PAS(ptr,sci_sel_enb,myid); +nosel: + icmd &= ~(SCI_ICMD_DATA|SCI_ICMD_SEL|SCI_ICMD_ATN); + W_PAS(ptr,sci_icmd,icmd); +lost: + W_PAS(ptr,sci_mode,0); + + return ret; +} + +static int +sci_data_out(P_PAS ptr, int phase, int count, u_char *data) +{ + register unsigned char icmd; + register int cnt=0; + +#ifdef PAS_DEBUG + printf("out%d@%x ",count,data); +#endif /* PAS_DEBUG */ + /* ..checks.. */ + + icmd = R_PAS(ptr,sci_icmd) & ~(SCI_ICMD_DIFF|SCI_ICMD_TEST); +loop: + if (SCI_CUR_PHASE(R_PAS(ptr,sci_bus_csr)) != phase) + return cnt; + + WAIT_FOR_REQ(ptr); + icmd |= SCI_ICMD_DATA; + W_PAS(ptr,sci_icmd,icmd); + W_PAS(ptr,sci_odata, *data++); + icmd |= SCI_ICMD_ACK; + W_PAS(ptr,sci_icmd,icmd); + + icmd &= ~(SCI_ICMD_DATA|SCI_ICMD_ACK); + WAIT_FOR_NOT_REQ(ptr); + W_PAS(ptr,sci_icmd,icmd); + ++cnt; + if (--count > 0) + goto loop; +scsi_timeout_error: + return cnt; +} + +static int +sci_data_in(P_PAS ptr, int phase, int count, u_char *data) +{ + register unsigned char icmd; + register int cnt=0; + +#ifdef PAS_DEBUG + printf("in%d@%x ",count,data); +#endif /* PAS_DEBUG */ + /* ..checks.. */ + + icmd = R_PAS(ptr,sci_icmd) & ~(SCI_ICMD_DIFF|SCI_ICMD_TEST); + +loop: + if (SCI_CUR_PHASE(R_PAS(ptr,sci_bus_csr)) != phase) + return cnt; + + WAIT_FOR_REQ(ptr); + *data++ = R_PAS(ptr,sci_data); + + icmd |= SCI_ICMD_ACK; + W_PAS(ptr,sci_icmd,icmd); + + icmd &= ~SCI_ICMD_ACK; + WAIT_FOR_NOT_REQ(ptr); + W_PAS(ptr,sci_icmd,icmd); + ++cnt; + if (--count > 0) + goto loop; + +scsi_timeout_error: + return cnt; +} + +#if PSEUDO_DMA + +static int +sci_pdma_in(P_PAS ptr, int phase, int count, u_char *data) +{ + register unsigned char icmd; + register int cnt=0; + +#ifdef PAS_DEBUG + printf("in%d@%x ",count,data); +#endif /* PAS_DEBUG */ + + WAIT_FOR_BSY(ptr); + M_PAS(ptr,sci_mode, |, SCI_MODE_DMA); + W_PAS(ptr,sci_dma_send, 0); + M_PAS(ptr,sci_icmd, |, SCI_ICMD_DATA); + +/* + while(R_PAS(ptr,sci_pdmastat) & 0x80) ; +*/ + + for(; cnt < count; cnt++) + *data++ = R_PAS(ptr,sci_pdmadata); + +scsi_timeout_error: + M_PAS(ptr,sci_mode, &, ~SCI_MODE_DMA); + M_PAS(ptr,sci_icmd, &, ~SCI_ICMD_DATA); + return cnt; +} +#endif /* PSEUDO_DMA */ + +static int +cmd_xfer(P_PAS ptr, int maxlen, u_char *data, u_char *status, u_char *msg) +{ + int xfer=0, phase; + +#ifdef PAS_DEBUG + printf("cmd_xfer called for 0x%x.\n", *data); +#endif /* PAS_DEBUG */ + + W_PAS(ptr,sci_icmd,0); + + while (1) { + + WAIT_FOR_REQ(ptr); + + phase = SCI_CUR_PHASE(R_PAS(ptr,sci_bus_csr)); + + switch (phase) { + case SCSI_PHASE_CMD: + SCI_ACK(ptr,SCSI_PHASE_CMD); + xfer += sci_data_out(ptr, SCSI_PHASE_CMD, maxlen, data); + return xfer; + case SCSI_PHASE_DATA_IN: + printf("Data in phase in cmd_xfer?\n"); + return 0; + case SCSI_PHASE_DATA_OUT: + printf("Data out phase in cmd_xfer?\n"); + return 0; + case SCSI_PHASE_STATUS: + SCI_ACK(ptr,SCSI_PHASE_STATUS); + printf("status in cmd_xfer.\n"); + sci_data_in(ptr, SCSI_PHASE_STATUS, 1, status); + break; + case SCSI_PHASE_MESSAGE_IN: + SCI_ACK(ptr,SCSI_PHASE_MESSAGE_IN); + printf("msgin in cmd_xfer.\n"); + sci_data_in(ptr, SCSI_PHASE_MESSAGE_IN, 1, msg); + break; + case SCSI_PHASE_MESSAGE_OUT: + SCI_ACK(ptr,SCSI_PHASE_MESSAGE_OUT); + sci_data_out(ptr, SCSI_PHASE_MESSAGE_OUT, 1, msg); + break; + default: + printf("Unexpected phase 0x%x in cmd_xfer()\n", phase); +scsi_timeout_error: + return xfer; + break; + } + } +} + +static int +data_xfer(P_PAS ptr, int maxlen, u_char *data, u_char *status, u_char *msg) +{ + int retlen = 0, xfer, phase; + + W_PAS(ptr,sci_icmd,0); + + *status = 0; + + while (1) { + + WAIT_FOR_REQ(ptr); + + phase = SCI_CUR_PHASE(R_PAS(ptr,sci_bus_csr)); + switch (phase) { + case SCSI_PHASE_CMD: + printf("Command phase in data_xfer().\n"); + return retlen; + case SCSI_PHASE_DATA_IN: + SCI_ACK(ptr,SCSI_PHASE_DATA_IN); + xfer = sci_pdma_in (ptr, SCSI_PHASE_DATA_IN, maxlen, data); + retlen += xfer; + maxlen -= xfer; + break; + case SCSI_PHASE_DATA_OUT: + SCI_ACK(ptr,SCSI_PHASE_DATA_OUT); + xfer = sci_pdma_out (ptr, SCSI_PHASE_DATA_OUT, maxlen, data); + retlen += xfer; + maxlen -= xfer; + break; + case SCSI_PHASE_STATUS: + SCI_ACK(ptr,SCSI_PHASE_STATUS); + sci_data_in(ptr, SCSI_PHASE_STATUS, 1, status); + break; + case SCSI_PHASE_MESSAGE_IN: + SCI_ACK(ptr,SCSI_PHASE_MESSAGE_IN); + sci_data_in(ptr, SCSI_PHASE_MESSAGE_IN, 1, msg); + if (*msg == 0) { + return retlen; + } else { + printf( "message 0x%x in data_xfer.\n", *msg); + } + break; + case SCSI_PHASE_MESSAGE_OUT: + SCI_ACK(ptr,SCSI_PHASE_MESSAGE_OUT); + sci_data_out(ptr, SCSI_PHASE_MESSAGE_OUT, 1, msg); + break; + default: + printf( "Unexpected phase 0x%x in data_xfer().\n", + phase); +scsi_timeout_error: + return retlen; + break; + } + } +} + +static int +scsi_req(P_PAS ptr, int target, int lun, u_char *cmd, int cmdlen, + u_char *databuf, int datalen, int *sent, int *ret) +{ +/* Returns 0 on success, -1 on internal error, or the status byte */ + int cmd_bytes_sent, r; + u_char stat, msg, c; + + *sent = 0; + if ( ( r = select_target(ptr, 7, target, 1) ) != SCSI_RET_SUCCESS) { + *ret = r; + SCI_CLR_INTR(ptr); + switch (r) { + case SCSI_RET_RETRY: +ARGH(); + return 0x08; + default: + printf("select_target(target %d, lun %d) failed(%d).\n", + target, lun, r); + case SCSI_RET_DEVICE_DOWN: + return -1; + } + } + + c = 0x80 | lun; + + if ((cmd_bytes_sent = cmd_xfer(ptr, cmdlen, cmd, &stat, &c)) + != cmdlen) { +ARGH(); + SCI_CLR_INTR(ptr); + *ret = SCSI_RET_COMMAND_FAIL; + printf("Data underrun sending CCB (%d bytes of %d, sent).\n", + cmd_bytes_sent, cmdlen); + return -1; + } + + *sent=data_xfer(ptr, datalen, databuf, &stat, &msg); + + *ret = 0; +#ifdef PAS_DEBUG + printf("scsi_req,stat=0x%x ",stat); +#endif /* PAS_DEBUG */ + return stat; +} + +static int +scsi_group0(int adapter, int id, int lun, + int opcode, int addr, int len, + int flags, caddr_t databuf, int datalen) +{ + P_PAS ptr = s_pas + adapter; + unsigned char cmd[6]; + int i,sent,ret; + + cmd[0] = opcode; /* Operation code */ + cmd[1] = (lun<<5) | ((addr>>16) & 0x1F); /* Lun & MSB of addr */ + cmd[2] = (addr >> 8) & 0xFF; /* addr */ + cmd[3] = addr & 0xFF; /* LSB of addr */ + cmd[4] = len; /* Allocation length */ + cmd[5] = flags; /* Link/Flag */ + + i = scsi_req(ptr, id, lun, cmd, 6, databuf, datalen, &sent, &ret); + + return i; +} + +/* pseudo-dma action */ + +#if 0 && PSEUDO_DMA + +static int pas_debug=1; +#define W1 *byte_data = *data++ +#define W4 *long_data = *((long*)data)++ + +int +sci_pdma_out(ptr, phase, count, data) + P_PAS ptr; + int phase; + int count; + u_char *data; +{ + register volatile long *long_data = sci_4byte_addr; + register volatile u_char *byte_data = sci_1byte_addr; + register int len = count, i; + +pas_debug=1; + + if (count < 128) + return sci_data_out(ptr, phase, count, data); + + WAIT_FOR_BSY(ptr); + M_PAS(ptr,sci_mode, |, SCI_MODE_DMA); + M_PAS(ptr,sci_icmd, |, SCI_ICMD_DATA); + W_PAS(ptr,sci_dma_send,0); + + while ( len >= 64 ) { + READY(1); W1; READY(1); W1; READY(1); W1; READY(1); W1; + READY(1); + W4;W4;W4; W4;W4;W4;W4; W4;W4;W4;W4; W4;W4;W4;W4; + len -= 64; + } + while (len) { + READY(1); + W1; + len--; + } + i = TIMEOUT; + while ( ((R_PAS(ptr,sci_csr) & (SCI_CSR_DREQ|SCI_CSR_PHASE_MATCH)) + == SCI_CSR_PHASE_MATCH) && --i); + if (!i) + printf("pas.c:%d: timeout waiting for SCI_CSR_DREQ.\n", __LINE__); + *byte_data = 0; +scsi_timeout_error: + M_PAS(ptr,sci_mode,&, ~SCI_MODE_DMA); + return count-len; +} + +#undef W1 +#undef W4 + +#define R4 *((long *)data)++ = *long_data +#define R1 *data++ = *byte_data + +int +sci_pdma_in(ptr, phase, count, data) + P_PAS ptr; + int phase; + int count; + u_char *data; +{ + register volatile long *long_data = sci_4byte_addr; + register volatile u_char *byte_data = sci_1byte_addr; + register int len = count, i; + +pas_debug=2; + if (count < 128) + return sci_data_in(ptr, phase, count, data); + +/* printf("Called sci_pdma_in(0x%x, 0x%x, %d, 0x%x.\n", ptr, phase, count, data); */ + + WAIT_FOR_BSY(ptr); + M_PAS(ptr,sci_mode, |, SCI_MODE_DMA); + M_PAS(ptr,sci_icmd, |, SCI_ICMD_DATA); + W_PAS(ptr,sci_irecv, 0); + + while (len >= 1024) { + READY(0); + R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; + R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; /* 128 */ + READY(0); + R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; + R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; /* 256 */ + READY(0); + R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; + R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; /* 384 */ + READY(0); + R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; + R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; /* 512 */ + READY(0); + R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; + R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; /* 640 */ + READY(0); + R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; + R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; /* 768 */ + READY(0); + R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; + R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; /* 896 */ + READY(0); + R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; + R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; /*1024 */ + len -= 1024; + } + while (len >= 128) { + READY(0); + R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; + R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; R4;R4;R4;R4; /* 128 */ + len -= 128; + } + while (len) { + READY(0); + R1; + len--; + } +scsi_timeout_error: + M_PAS(ptr,sci_mode, &, ~SCI_MODE_DMA); + return count - len; +} +#undef R4 +#undef R1 +#endif +#endif /* NPAS */ |