NODEVFS cleanup: Goodbye, and good riddance!

2 files changed, 0 insertions, 1828 deletions

diff --git a/etc/MAKEDEV b/etc/MAKEDEV
deleted file mode 100644
index 72a8fe3..0000000
--- a/etc/MAKEDEV
+++ /dev/null
@@ -1,1778 +0,0 @@
-#!/bin/sh -
-#
-# Copyright (c) 1990 The Regents of the University of California.
-# All rights reserved.
-#
-# Written and contributed by W. Jolitz 12/90
-#
-# Redistribution and use in source and binary forms are permitted provided
-# that: (1) source distributions retain this entire copyright notice and
-# comment, and (2) distributions including binaries display the following
-# acknowledgement:  ``This product includes software developed by the
-# University of California, Berkeley and its contributors'' in the
-# documentation or other materials provided with the distribution and in
-# all advertising materials mentioning features or use of this software.
-# Neither the name of the University nor the names of its contributors may
-# be used to endorse or promote products derived from this software without
-# specific prior written permission.
-# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-#
-#	@(#)MAKEDEV	5.2 (Berkeley) 6/22/90
-# $FreeBSD$
-#
-# Device "make" file.  Valid arguments:
-#	all	makes all known devices, standard number of units (or close)
-#	std	standard devices
-#	jail	suitable for a jail(8)
-#	local	configuration specific devices
-#	mach-4	mach4&lites+devices for Mach's XFree86 distribution
-#	(see http://www.cs.hut.fi/lites.html for more info on LITES)
-#
-# Tapes:
-#	wt*	QIC-interfaced (e.g. not SCSI) 3M cartridge tape
-#	sa*	SCSI Sequential Access Devices
-#
-# Disks:
-#	aac*	Adaptec FSA RAID controllers
-#	aacd*	Adaptec FSA RAID
-#	acd*	ATAPI CD-ROM disks
-#	amrd*	AMI MegaRAID
-#	cd*	SCSI CD-ROM disks
-#	da*	SCSI Direct Access Devices
-#	fd*	floppy disk drives (3 1/2", 5 1/4")
-#	fla*	M-Systems DiskOnChip
-#	idad*	Compaq Smart-2 RAID arrays
-#	mcd*	Mitsumi CD-ROM disks
-#	md*	Memory (or malloc) disk
-#	mlx*	Mylex DAC960 RAID controllers
-#	mlxd*	Mylex DAC960 RAID disk volumes
-#	mly*	Mylex RAID controllers (newer models)
-#	scd*	Sony CD-ROM disks
-#	wd*	"Winchester" disk drives (ST506,IDE,ESDI,RLL,...)
-#	wfd*	IDE floppy disk drives (LS-120)
-#
-# Console ports:
-#	vty*	virtual console devices for syscons/pcvt/codrv
-#
-# Pointing devices:
-#	mse*	Logitech and ATI Inport bus mouse
-#	psm*	PS/2 mouse
-#	jogdial	Sony VAIO jog dial
-#	sysmouse Mousesystems mouse emulator for syscons
-#
-# Time devices:
-#	refclock-*  serial ports used by xntpd parse refclocks
-#
-# Terminal ports:
-#	tty*	general purpose serial ports
-#	cua*	dialout serial ports
-#	ttyA*	Specialix SI/XIO dialin ports ('*' = number of devices)
-#	cuaA*	Specialix SI/XIO dialout ports
-#	ttyDXX	Digiboard Xi - 16 dialin ports (dgb)
-#	cuaDXX	Digiboard Xi - 16 dialout ports (dgb)
-#	ttyDX.X	Digiboards (work in progress) - 16 dialin ports (digi)
-#	cuaDX.X	Digiboards (work in progress) - 16 dialout ports (digi)
-#	ttyM*	Digiboard Xem - 16 dialin ports (dgm)
-#	cuaM*	Digiboard Xem - 16 dialout ports (dgm)
-#	ttyR*	Rocketport dialin ports
-#	cuaR*	Rocketport dialout ports
-#
-# Pseudo terminals:
-#	pty*	set of 32 master and slave pseudo terminals
-#	vty*	virtual terminals using syscons/pcvt/codrv console
-#
-# Parallel port:
-#	lpt*	Printer
-#	ppi*	Parallel port i/o
-#	pps*	Pulse per second timing interface
-#	pcfclock*  Parallel time sync interface
-#
-# I2C and SMBus:
-#	iic*	I2C devices
-#	smb*	SMBUS devices
-#
-# USB devices:
-#	usb*	USB bus control device
-#	ugen*	generic USB device
-#	uhid*	Human Interface Device (HID)
-#	ulpt*	printer
-#	umodem*	modems
-#	ums*	mouse
-#	urio*	Diamond Rio 500
-#	uscanner* USB scanners
-#	ucom*	USB serial devices
-#
-# SCSI devices (other than CD-ROM, tape and disk):
-#	ch*	SCSI Media-Changer (juke box) driver
-#	pt*	Processor Type (HP scanner, as one example)
-#	pass*	CAM Passthrough device
-#	ses*	SES (SCSI Environmental Services) and
-#		SAF-TE (Scsi Accessable Fault-Tolerant Enclosures) device
-#
-# PC-CARD (previously called PCMCIA) support
-#	card*	PC-CARD slots
-#
-# ISDN devices:
-#	i4b	isdnd call control device
-#	i4bctl	debugging control device
-#	i4btrc*	trace data interface(s), one per passive card
-#	i4btel*	telephony interface(s)
-#	i4bteld* telephony dialout interface(s)
-#	i4brbch* raw b channel access device(s)
-#
-# Special purpose devices:
-#	acpi	Advanced Configuration and Power Interface
-#	apm	Advanced Power Management BIOS
-#	apmctl	APM BIOS control device
-#	bpf*	packet filter
-#	crypto	crypto interface
-#	speaker	pc speaker
-#	tw*	xten power controller
-#	snd*	various sound cards
-#	pcaudio	PCM audio driver
-#	socksys	iBCS2 socket system driver
-#	vat	VAT compatibility audio driver (requires snd*)
-#	gsc	Genius GS-4500 hand scanner
-#	joy	pc joystick
-#	tun*	Tunneling IP device
-#	tap*	Ethernet Tunneling device
-#	snp*	tty snoop devices
-#	spigot	Video Spigot video acquisition card
-#	ctx*	Cortex-I video acquisition card
-#	meteor*	Matrox Meteor video acquisition card (pci)
-#	bktr*	Bt848 based video acquisition card (pci)
-#	labpc*	National Instrument's Lab-PC and LAB-PC+
-#	perfmon	CPU performance-monitoring counters
-#	pci	PCI configuration-space access from user mode
-#	ipl	ipfilter control devices (ipl, ipnat, ipstate, ipauth)
-#	kbd	keyboard devices
-#	3dfx*	3dfx voodoo device for glide (tdfx) (/dev/3dfx,3dfxN,voodoo)
-#	agpgart	AGP interface
-#	cfs*	Coda Distributed Filesystem
-#	nsmb*	SMB/CIFS protocol interface
-#	elan-mmcr	AMD Elan support (e.g. mmap MMCR)
-#
-
-if [ -n "$MAKEDEVPATH" ]; then
-	PATH="$MAKEDEVPATH"
-else
-	PATH=/sbin:/bin
-fi
-umask 77
-
-# Usage: die exitcode msg
-die() {
-	echo $2
-	exit $1
-}
-
-# Convert integer to partition name
-dkitop() {
-	local p
-
-	case $1 in
-	0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;;
-	*) p="?";;
-	esac
-	echo $p
-}
-
-# Convert integer to slice name
-dkitos() {
-	local s
-
-	case $1 in
-	0) s="";;
-	1) s="";;
-	*) s=s$(($1-1));;
-	esac
-	echo $s
-}
-
-# Convert disk (type, unit, slice, partition) to minor number
-dkminor()
-{
-	echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | $4))
-}
-
-# Print the hexadecimal representation of a decimal value from 0 to 15.
-hexdigit() {
-	local d
-
-	if [ $1 -lt 10 ]; then
-		d=$1
-	else
-		case $1 in
-		10) d=a;; 11) d=b;; 12) d=c;; 13) d=d;; 14) d=e;; 15) d=f;;
-		*) d="?";;
-		esac
-	fi
-	echo $d
-}
-
-# Print the hexadecimal representation of an arbitrary decimal value.
-hexprint() {
-	local dig
-	local str
-	local val
-
-	val=$1
-	str=''
-	dig=`hexdigit $(($val & 15))`
-	str=$dig$str
-	val=$(($val >> 4))
-	while [ $val -gt 0 ]; do
-		dig=`hexdigit $(($val & 15))`
-		str=$dig$str
-		val=$(($val >> 4))
-	done
-	echo $str
-}
-
-# Override mknod(2) to add extra handling to it.
-mknod=/sbin/mknod
-for i in `IFS=':'; echo $PATH`; do
-	if [ -x "${i}/mknod" ]; then
-		mknod="${i}/mknod"
-		break
-	fi
-done
-mknod() {
-	rm -f "$1" || exit 1
-	case $# in
-	4) "$mknod" "$@" root:wheel || die 2 "$mknod $@ failed";;
-	5) "$mknod" "$@"            || die 2 "$mknod $@ failed";;
-	*) die 2 "bad node: mknod $@";;
-	esac
-}
-
-# Convert tape (ctrl, unit, mode, access) to minor number
-saminor()
-{
-	echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4))
-}
-
-# Convert the last character of a tty name to a minor number.
-ttyminor()
-{
-	case $1 in
-	[0-9]) m=$1;;
-	a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;;
-	h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;;
-	o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;;
-	v) m=31;;
-	*) m="?";;
-	esac
-	echo $m
-}
-
-# Convert a unit number to a minor number.
-unit2minor()
-{
-	echo $(((($1 >> 8) << 16) | ($1 % 256)))
-}
-
-# Zero-pad a value to the appropriate minimum length.
-zeropad() {
-	local min
-	local val
-
-	min=$1
-	val=$2
-	while [ ${#val} -lt $min ]; do
-		val=0$val
-	done
-	echo $val
-}
-
-# Raw partition for disks
-dkrawpart=2
-
-# Compatibility slice for disks
-dkcompatslice=0
-
-# Raw slice for disks
-dkrawslice=1
-
-# Standard umasks
-disk_umask=037			# allow group operator to read disks
-tape_umask=017			# allow group operator to read/write tapes
-
-for i in $*; do
-case $i in
-
-all)
-	sh $0 std					# standard
-	sh $0 fd0 fd1					# floppy disk
-	sh $0 da0 da1 da2 da3 				# SCSI disk
-	sh $0 ata					# ATA control
-	sh $0 ad0 ad1 ad2 ad3 				# ATA disk
-	sh $0 ar0 ar1					# ATA RAID disk
-	sh $0 acd0 acd0t0 afd0 ast0			# ATAPI devices
-	sh $0 wd0 wd1 wd2 wd3				# OLD disk
-	sh $0 wcd0 wfd0 wst0				# OLD ATAPI devs
-	sh $0 cd0 mcd0 scd0				# cdrom
-	sh $0 sa0 wt0					# tape
-	sh $0 vty12					# virtual tty
-	sh $0 cuaa0 cuaa1 cuaa2 cuaa3			# serial tty
-	sh $0 pty0					# pseudo tty
-	sh $0 ttyd0 ttyd1 ttyd2 ttyd3			# serial tty
-	sh $0 kbd0 kbd1					# keyboard
-	sh $0 mse0 psm0 jogdial sysmouse		# mouse
-	sh $0 pcaudio speaker				# noise
-	sh $0 lpt0 lpt1 lpt2				# printer
-	sh $0 ppi0 ppi1 ppi2				# parallel port
-	sh $0 iic0 iic1					# I2C device
-	sh $0 smb0 smb1					# SMBus device
-	sh $0 usb usb0 uhid0 ums0 ulpt0 ugen0		# USB devices
-	sh $0 urio0 uscanner0 umodem0			# USB devices too
-	sh $0 bpf0 bpf1 bpf2 bpf3 			# network
-	sh $0 ipl tun0 tun1 tun2 tun3			# network
-	sh $0 tap0 tap1 tap2 tap3			# network
-	sh $0 ch0 perfmon tw0				# miscellaneous
-	sh $0 acpi					# ACPI
-	sh $0 apm apmctl card0 card1 card2 card3	# laptop
-	sh $0 pass4 xpt2				# CAM
-	sh $0 i4b i4bctl i4btrc0 i4btrc1		# ISDN
-	sh $0 i4btel0 i4btel1 i4bteld0 i4bteld1		# ISDN
-	sh $0 i4brbch0 i4brbch1				# ISDN
-	sh $0 agpgart					# AGP
- 	sh $0 nsmb0					# SMB/CIFS
-	sh $0 ti0 ti1					# ti(4)
-	sh $0 crypto					# crypto
-	;;
-
-# a much restricted set of the above, to save precious i-nodes on the
-# fixit floppy
-fixit)
-	sh $0 std					# standard
-	sh $0 fd0					# floppy disk
-	sh $0 da0 					# SCSI disk
-	sh $0 ad0		 			# ATA disk
-	sh $0 acd0 afd0 ast0				# ATAPI devices
-	sh $0 wd0					# OLD disk
-	sh $0 wcd0 wfd0 wst0				# OLD ATAPI devs
-	sh $0 cd0					# cdrom
-	sh $0 sa0					# tape
-	sh $0 vty2					# virtual tty
-	sh $0 cuaa0					# serial tty
-	sh $0 pty0					# pseudo tty
-	sh $0 ttyd0					# serial tty
-	sh $0 kbd0					# keyboard
-	sh $0 mse0 psm0 jogdial sysmouse		# mouse
-	sh $0 lpt0					# printer
-	sh $0 ppi0					# parallel port
-	sh $0 iic0					# I2C device
-	sh $0 smb0					# SMBus device
-	sh $0 ums0					# USB devices
-	sh $0 tun0					# network
-	sh $0 tap0					# network
-	sh $0 ch0					# miscellaneous
-	sh $0 acpi					# ACPI
-	sh $0 apm apmctl card0				# laptop
-	sh $0 pass1 xpt1				# CAM
-	sh $0 i4b i4bctl i4btrc0 i4btrc1		# ISDN
-	sh $0 i4btel0 i4bteld0		 		# ISDN
-	sh $0 i4brbch0					# ISDN
-	rm -f fd/[1-9]?
-	;;
-
-std)
-	mknod console	c 0 0;			chmod 600 console
-	mknod kmem	c 2 1 root:kmem;	chmod 640 kmem
-	mknod mem	c 2 0 root:kmem;	chmod 640 mem
-	mknod null	c 2 2;			chmod 666 null
-	mknod random	c 2 3;			chmod 666 random
-	ln -f random urandom
-	mknod zero	c 2 12;			chmod 666 zero
-	mknod io	c 2 14;			chmod 600 io
-	mknod tty	c 1 0;			chmod 666 tty
-	mknod klog	c 7 0;			chmod 600 klog
-	mknod pci	c 78 0; 		chmod 644 pci
-	mknod mdctl	c 95 0xffff00ff;	chmod 600 mdctl
-	mkdir -p fd
-	(cd fd && i=0 &&
-		while [ $i -lt 64 ]; do
-			mknod $i c 22 $i
-			i=$(($i + 1))
-		done
-	)
-	chmod 555 fd
-	chmod 666 fd/*
-	ln -sf fd/0 stdin
-	ln -sf fd/1 stdout
-	ln -sf fd/2 stderr
-	;;
-
-jail)
-	sh $0 std pty0
-	rm mem kmem pci io klog console		# for security
-	ln -sf null mem			# for libkvm (ab)users
-	ln -sf null kmem		# --//--
-	ln -sf null console
-	;;
-
-mach-4)
-	mknod iopl c 22 0
-	mknod kbd c 23 0
-	mknod mouse c 24 0
-	mknod time c 25 0
-	mknod timezone c 26 0
-	;;
-
-# Create device files for new Archive/Wangtek QIC-02 tape driver (vak)
-wt*)
-	umask $tape_umask
-	u=`expr $i : '..\(.*\)'`
-	if [ -z "${u}" ]; then u=0; fi
-	# default density, 512b blocks
-	mknod rwt${u}   c 10 $(( 0 + $u)) root:operator
-	mknod nrwt${u}  c 10 $(( 4 + $u)) root:operator
-	# default density, 1024b blocks
-#	mknod rWt${u}   c 10 $((64 + $u)) root:operator
-#	mknod nrWt${u}  c 10 $((68 + $u)) root:operator
-	mknod rwt${u}b  c 10 $((16 + $u)) root:operator	# 60 megabytes
-	mknod nrwt${u}b c 10 $((20 + $u)) root:operator
-	mknod rwt${u}c  c 10 $((24 + $u)) root:operator	# 120 megabytes
-	mknod nrwt${u}c c 10 $((28 + $u)) root:operator
-	mknod rwt${u}d  c 10 $((32 + $u)) root:operator	# 150 megabytes
-	mknod nrwt${u}d c 10 $((36 + $u)) root:operator
-#	mknod rwt${u}e  c 10 $((40 + $u)) root:operator	# 300 megabytes?
-#	mknod nrwt${u}e c 10 $((44 + $u)) root:operator
-#	mknod rwt${u}f  c 10 $((48 + $u)) root:operator	# 600 megabytes?
-#	mknod nrwt${u}f c 10 $((52 + $u)) root:operator
-	umask 77
-	;;
-
-raidctl)
-	mknod raidctl c 201 0
-	;;
-
-# Individual slices.
-aacd*s*|ad*s*|ar*s*|afd*s*|amrd*s*|da*s*|fla*s*|idad*s*|md*s*|mlxd*s*|twed*s*|wd*s*|wfd*s*|raid*s*)
-	umask $disk_umask
-	case $i in
-	aacd*s*) name=aacd; chr=151;;
-	ad*s*) name=ad; chr=116;;
-	ar*s*) name=ar; chr=157;;
-	afd*s*) name=afd; chr=118;;
-	amrd*s*) name=amrd; chr=133;;
-	da*s*) name=da;  chr=13;;
-	fla*s*) name=fla; chr=102;;
-	idad*s*) name=idad; chr=109;;
-	md*s*) name=md;  chr=95;;
-	mlxd*s*) name=mlxd; chr=131;;
-	twed*s*) name=twed; chr=147;;
-	wd*s*) name=wd;  chr=3;;
-	wfd*s*) name=wfd; chr=87;;
-	raid*s*) name=raid; chr=200;;
-	esac
-	case $i in
-	aacd*s*|amrd*s*|idad*s*|mlxd*s*|twed*s*|raid*s*)
-		unit=`expr $i : '....\([0-9]*\)s'`
-		slice=`expr $i : '....[0-9]*s\([0-9]*\)'`
-		part=`expr $i : '....[0-9]*s[0-9]*\(.*\)'`
-		;;
-	afd*s*|fla*s*|wfd*s*)
-		unit=`expr $i : '...\([0-9]*\)s'`
-		slice=`expr $i : '...[0-9]*s\([0-9]*\)'`
-		part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'`
-		;;
-	*)
-		unit=`expr $i : '..\([0-9]*\)s'`
-		slice=`expr $i : '..[0-9]*s\([0-9]*\)'`
-		part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'`
-		;;
-	esac
-	case $unit in
-	[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
-		case $slice in
-		[0-9]|[1-2][0-9]|30)
-			oldslice=$slice
-			slice=$(($slice+1))
-			slicename=`dkitos $slice`
-			minor=`dkminor 0 $unit $slice $dkrawpart`
-			mknod  $name$unit$slicename c $chr $minor root:operator
-			ln -f $name$unit$slicename r$name$unit$slicename
-			case $part in
-			[a-h])
-				case $oldslice in
-				0) slice=$oldslice ;;
-				esac
-				for part in 0 1 2 3 4 5 6 7
-				do
-					minor=`dkminor 0 $unit $slice $part`
-					partname=`dkitop $part`
-					mknod  $name$unit$slicename$partname \
-					      c $chr $minor root:operator
-					ln -f $name$unit$slicename$partname \
-					     r$name$unit$slicename$partname
-				done
-				;;
-			"")
-				;;
-			*)
-				echo bad partition for disk in: $i
-				;;
-			esac
-			;;
-		*)
-			echo bad slice for disk in: $i
-			;;
-		esac
-		;;
-	*)
-		echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)"
-		;;
-	esac
-	umask 77
-	;;
-
-fd*)
-	umask $disk_umask
-	unit=`expr $i : '..\(.*\)'`
-	name=fd; chr=9
-	case $unit in
-	0|1|2|3)
-		mknod ${name}${unit}   c $chr $(($unit * 64)) root:operator
-		# Fake BSD partitions
-		for i in a b c d e f g h
-		do
-			ln -f ${name}${unit} ${name}${unit}$i
-		done
-		;;
-	*)
-		echo bad unit for disk in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-ata)
-	umask 177
-	mknod ata c 159 0 root:operator
-	umask 77
-	;;
-	
-
-aacd*|ad*|ar*|afd*|amrd*|da*|fla*|idad*|md*|mlxd*|twed*|wd*|wfd*|raid*)
-	umask $disk_umask
-	case $i in
-	aacd*) name=aacd; chr=151;;
-	ad*) name=ad; chr=116;;
-	ar*) name=ar; chr=157;;
-	afd*) name=afd; chr=118;;
-	amrd*) name=amrd; chr=133;;
-	da*) name=da;  chr=13;;
-	fla*) name=fla; chr=102;;
-	idad*) name=idad; chr=109;;
-	md*) name=md; chr=95;;
-	mlxd*) name=mlxd; chr=131;;
-	twed*) name=twed; chr=147;;
-	wd*) name=wd;  chr=3;;
-	wfd*) name=wfd; chr=87;;
-	raid*) name=raid; chr=200;;
-	esac
-	case $i in
-	aacd*|amrd*|idad*|mlxd*|twed*|raid*)
-		unit=`expr $i : '....\(.*\)'`
-		;;
-	afd*|fla*|wfd*)
-		unit=`expr $i : '...\(.*\)'`
-		;;
-	*)
-		unit=`expr $i : '..\(.*\)'`
-		;;
-	esac
-	case $unit in
-	[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
-		for slicepartname in s0h s1h s2 s3 s4
-		do
-			sh $0 $name$unit$slicepartname
-		done
-		;;
-	*)
-		echo bad unit for disk in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-ccd*)
-	umask $disk_umask
-	name=ccd
-	chr=74
-	unit=`expr $i : '...\(.*\)'`
-	case $unit in
-	[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
-		for part in 0 1 2 3 4 5 6 7
-		do
-			minor=`dkminor 0 $unit 0 $part`
-			partname=`dkitop $part`
-			mknod  $name$unit$partname c $chr $minor root:operator
-			ln -f $name$unit$partname r$name$unit$partname
-		done
-		;;
-	*)
-		echo bad unit for disk in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-# SCSI processor type driver
-pt[0-9]*)
-	chr=61
-	name=pt
-	unit=`expr $i : 'pt\([0-9][0-9]*\)'`
-	if [ -z "${unit}" ]; then
-		unit=0
-	fi
-	unit=$(($unit + 1 - 1))
-	mknod ${name}${unit} c $chr `unit2minor $unit`
-	;;
-
-# SCSI SES/SAF-TE type driver
-ses[0-9]*)
-	chr=110
-	name=ses
-	unit=`expr $i : 'ses\([0-9][0-9]*\)'`
-	if [ -z "${unit}" ]; then
-		unit=0
-	fi
-	unit=$(($unit + 1 - 1))
-	mknod ${name}${unit} c $chr `unit2minor $unit`
-	;;
-# SCSI target mode sample driver
-targ[0-9]*)
-	chr=65
-	name=targ
-	unit=`expr $i : 'targ\([0-9][0-9]*\)'`
-	if [ -z "${unit}" ]; then
-		unit=0
-	fi
-	unit=$(($unit + 1 - 1))
-	mknod ${name}${unit} c $chr `unit2minor $unit`
-	mknod ${name}.ctl c $chr 0xffff00ff
-	;;
-
-# CAM transport layer device
-xpt*)
-	# This major number is temporary
-	chr=104
-	name=xpt
-	units=`expr $i : 'xpt\(.*\)'`
-	if [ -z "${units}" ]; then
-		units=1
-	fi
-	i=0
-	while [ $i -lt $units ]; do
-		dname=$name$i
-		rm -rf $dname r$dname
-		mknod $dname c $chr `unit2minor $i` root:operator
-		i=$(($i + 1))
-	done	
-	;;
-
-# CAM passthrough device
-pass*)
-	# This major number is temporary
-	chr=31
-	name=pass
-	units=`expr $i : 'pass\(.*\)'`
-	if [ -z "${units}" ]; then
-		units=1
-	fi
-	i=0
-	while [ $i -lt $units ]; do
-		dname=$name$i
-		rm -rf $dname r$dname
-		mknod $dname c $chr `unit2minor $i` root:operator
-		i=$(($i + 1))
-	done	
-	;;
-pty*)
-	class=`expr $i : 'pty\(.*\)'`
-	case $class in
-	0) offset=0 name=p;;
-	1) offset=32 name=q;;
-	2) offset=64 name=r;;
-	3) offset=96 name=s;;
-# Note that xterm (at least) only look at p-s.
-	4) offset=128 name=P;;
-	5) offset=160 name=Q;;
-	6) offset=192 name=R;;
-	7) offset=224 name=S;;
-	# This still leaves [tuTU].
-	*) echo bad unit for pty in: $i;;
-	esac
-	umask 0
-	case $class in
-	0|1|2|3|4|5|6|7)
-		i=0
-		while [ $i -lt 32 ]; do
-#			This was an awk substr() before.
-			c=$(echo 0123456789abcdefghijklmnopqrstuv |
-			    dd bs=1 skip=$i count=1 2>/dev/null)
-			mknod tty$name$c c 5 $(($offset + $i))
-			mknod pty$name$c c 6 $(($offset + $i))
-			i=$(($i + 1))
-		done
-		;;
-	esac
-	umask 77
-	;;
-
-sa*)
-	umask $tape_umask
-	unit=`expr $i : '..\(.*\)'`
-	chr=14
-
-	case $unit in
-	[0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9])
-		mknod sa${unit}.ctl c $chr `saminor 1 ${unit} 0 0`
-		ln -f sa${unit}.ctl rsa${unit}.ctl
-		for m in 0 1 2 3
-		do
-			mknod sa${unit}.${m} c $chr \
-			    `saminor 0 ${unit} ${m} 0`  root:operator
-			ln -f sa${unit}.${m} rsa${unit}.${m}
-			mknod nsa${unit}.${m} c $chr \
-			    `saminor 0 ${unit} ${m} 1` root:operator
-			ln -f nsa${unit}.${m} nrsa${unit}.${m}
-			mknod esa${unit}.${m} c $chr \
-			    `saminor 0 ${unit} ${m} 2` root:operator
-			ln -f esa${unit}.${m} ersa${unit}.${m}
-		done
-		ln -f sa${unit}.0 sa${unit}
-		ln -f sa${unit}.0 rsa${unit}.0
-		ln -f sa${unit}.0 rsa${unit}
-		ln -f nsa${unit}.0 nsa${unit}
-		ln -f nsa${unit}.0 nrsa${unit}.0
-		ln -f nsa${unit}.0 nrsa${unit}
-		ln -f esa${unit}.0 esa${unit}
-		ln -f esa${unit}.0 ersa${unit}.0
-		ln -f esa${unit}.0 ersa${unit}
-		;;
-	*)
-		echo bad unit for tape in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-ch*)
-	umask 37
-	unit=`expr $i : '..\(.*\)'`
-	case $i in
-	ch*) name=ch;  chr=17;;
-	esac
-	case $unit in
-	0|1|2|3|4|5|6)
-		mknod ${name}${unit}	c $chr $unit root:operator
-		;;
-	*)
-		echo bad unit for media changer in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-ast*)
-	umask 2 ;
-	unit=`expr $i : '...\(.*\)'`
-	chr=119
-	case $unit in
-	0|1|2|3)
-		mknod ast${unit} c $chr $(($unit * 8 + 0)) root:operator
-		chmod 640 ast${unit}
-		mknod nast${unit} c $chr $(($unit * 8 + 1)) root:operator
-		chmod 640 nast${unit}
-		;;
-	*)
-		echo bad unit for tape in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-acd*t*)
-	umask $disk_umask
-	units=`expr $i : '...\(.*\)t'`;
-	tracks=`expr $i : '.*t\(.*\)'`;
-	name=acd;
-	chr=117;
-	if [ -z "${units}" ]; then
-		units=0
-	fi
-	if [ -z "${tracks}" ]; then
-		tracks=100
-	fi
-	if [ "${units}" -le 31 -a "${tracks}" -le 169 ]; then
-		i=0
-		while [ $i -le $units ]; do
-			dname=$name$i
-			rm -rf ${dname}t*
-			j=1
-			while [ $j -le ${tracks} ]; do
-				mknod ${dname}t$j c $chr \
-					$((($i * 8) + (65536 * $j))) \
-					root:operator
-				j=$(($j + 1))
-			done
-			i=$(($i + 1))
-		done
-	else
-		echo "$i is invalid -- can't have more than 32 cd devices or 169 tracks"
-	fi
-	umask 77
-	;;
-
-acd*|cd*|mcd*|scd*)
-	umask $disk_umask
-	case $i in
-	acd*) units=`expr $i : '...\(.*\)'`; name=acd; chr=117;;
-	cd*) units=`expr $i : '..\(.*\)'`; name=cd; chr=15;;
-	mcd*) units=`expr $i : '...\(.*\)'`; name=mcd; chr=29;;
-	scd*) units=`expr $i : '...\(.*\)'`; name=scd; chr=45;;
-	esac
-	if [ -z "${units}" ]; then
-		units=0
-	fi
-	if [ "${units}" -le 31 ]; then
-		i=0
-		while [ $i -le $units ]; do
-			dname=$name$i
-			rm -rf ${dname}[!t]* r${dname}*
-			mknod ${dname}a c $chr $(($i * 8)) root:operator
-			mknod ${dname}c c $chr $(($i * 8 + 2)) root:operator
-			ln -f ${dname}a r${dname}a
-			ln -f ${dname}c r${dname}c
-			i=$(($i + 1))
-		done
-	else
-		echo "$i is invalid -- can't have more than 32 cd devices"
-	fi
-	umask 77
-	;;
-
-wcd*)
-	umask 2 ;
-	unit=`expr $i : '...\(.*\)'`
-	chr=69
-	case $unit in
-	0|1|2|3|4|5|6|7)
-		mknod wcd${unit}a  c $chr $(($unit * 8 + 0)) root:operator
-		mknod wcd${unit}c  c $chr $(($unit * 8 + 2)) root:operator
-		ln -f wcd${unit}a rwcd${unit}a
-		ln -f wcd${unit}c rwcd${unit}c
-		chmod 640 wcd${unit}[a-h] rwcd${unit}[a-h]
-		;;
-	*)
-		echo bad unit for disk in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-wst*)
-	umask 2 ;
-	unit=`expr $i : '...\(.*\)'`
-	chr=90
-	case $unit in
-	0|1|2|3)
-		mknod rwst${unit} c $chr $(($unit * 8 + 0)) root:operator
-		chmod 640 rwst${unit}
-		;;
-	esac
-	umask 77
-	;;
-
-iic*)
-	unit=`expr $i : 'iic\(.*\)'`
-	mknod iic$unit c 105 `unit2minor $unit`
-	;;
-
-smb*)
-	unit=`expr $i : 'smb\(.*\)'`
-	mknod smb$unit c 106 `unit2minor $unit`
-	;;
-
-pcfclock*)
-	unit=`expr $i : 'pcfclock\(.*\)'`
-	mknod pcfclock$unit c 140 `unit2minor $unit`
-	;;
-
-ppi*)
-	unit=`expr $i : 'ppi\(.*\)'`
-	mknod ppi$unit c 82 `unit2minor $unit`
-	;;
-
-pps*)
-	unit=`expr $i : 'pps\(.*\)'`
-	mknod pps$unit c 89 `unit2minor $unit`
-	;;
-
-usb)
-	mknod usb c 108 255 root:operator
-	chmod 0660 usb
-	;;
-
-usb*)
-	umask 7
-	unit=`expr $i : 'usb\(.*\)'`
-	mknod usb$unit c 108 `unit2minor $unit` root:operator
-	umask 77
-	;;
-
-uhid*)
-	umask 7
-	unit=`expr $i : 'uhid\(.*\)'`
-	mknod uhid$unit c 122 `unit2minor $unit` root:operator
-	umask 77
-	;;
-
-ums*)
-	umask 7
-	unit=`expr $i : 'ums\(.*\)'`
-	mknod ums$unit c 111 `unit2minor $unit` root:operator
-	umask 77
-	;;
-
-ulpt*)
-	unit=`expr $i : 'ulpt\(.*\)'`
-	minor=`unit2minor $unit`
-	mknod ulpt$unit c 113 $minor
-	minor=`unit2minor $(($unit + 64))`
-	mknod unlpt$unit c 113 $minor		# and the 'no prime' version
-	;;
-
-ugen*)
-	umask 7
-	unit=`expr $i : 'ugen\([0-9][0-9]*\)'`
-	endpoint=`expr $i : 'ugen.*\.\([0-9][0-9]*\)'`
-	if [ -z "${unit}" ]; then
-		echo $i - Invalid unit number
-	fi
-	if [ -z "${endpoint}" ]; then		# ugen0 & ugen0.1 - ugen0.15
-		mknod ugen$unit c 114 \
-				`unit2minor $(($unit * 16))` root:operator
-		i=1
-		while [ $i -lt 16 ]; do
-			mknod ugen$unit.$i c 114 \
-				`unit2minor $(($unit * 16 + $i))` root:operator
-			i=$(($i + 1))
-		done
-	else
-		minor=`unit2minor $(($unit * 16 + $endpoint))`
-		mknod ugen$unit.$endpoint c 114 $minor root:operator
-	fi
-	umask 77
-	;;
-
-urio*)
-	umask 7
-	unit=`expr $i : 'urio\(.*\)'`
-	mknod urio$unit c 143 `unit2minor $unit` root:operator
-	umask 77
-	;;
-
-ucom*)
-	umask 7
-	unit=`expr $i : 'ucom\(.*\)'`
-	minor=`unit2minor $(($unit + 128))`
-	mknod ucom$unit c 138 $minor uucp:dialer
-	umask 77
-	;;
-
-uscanner*)
-	umask 7
-	unit=`expr $i : 'uscanner\(.*\)'`
-	mknod uscanner$unit c 156 `unit2minor $unit` root:operator
-	umask 77
-	;;
-
-umodem*)
-	umask 7
-	unit=`expr $i : 'umodem\(.*\)'`
-	mknod umodem$unit c 124 `unit2minor $unit` uucp:dialer
-	umask 77
-	;;
-
-lpt*)
-	unit=`expr $i : 'lpt\(.*\)'`
-	mknod lpt$unit c 16 `unit2minor $unit`
-	mknod lpctl$unit c 16 `unit2minor $(($unit + 128))`
-	;;
-
-# Use this to create virtual consoles for syscons, pcvt or codrv
-# ttyv0-b
-# use as MAKEDEV vtyNN to create NN entries
-vty*)
-	chr=12
-	units=`expr $i : 'vty\(.*\)'`
-	i=0
-	while [ $i -lt $units ]; do
-		mknod ttyv$(hexprint $i) c $chr `unit2minor $i`
-		i=$(($i + 1))
-	done
-	ln -fs ttyv0 vga	# XXX X still needs this pccons relic
-	;;
-
-nmdm*)
-	units=`expr $i : 'nmdm\(.*\)'`
-	chr=18
-	i=0
-	while [ $i -lt $units ]; do
-		minor=`unit2minor $i`
-		minor=$(($minor + $minor))
-		mknod nmdm${i}A c $chr $minor
-		mknod nmdm${i}B c $chr $(($minor + 1))
-		i=$(($i + 1))
-	done
-	;;
-
-bpf*)
-	units=`expr $i : 'bpf\(.*\)$'`
-	unit=0
-	while [ $unit -le $units ]; do
-		mknod bpf$unit c 23 `unit2minor $unit`
-		unit=$(($unit + 1))
-	done
-	;;
-
-speaker)
-	mknod speaker c 26 0
-	;;
-
-cua?|cuaa?|cuaa??)
-	umask 7
-	unit_low=`expr $i : 'cua.*\(.\)$'`
-	case $i in
-	cua?|cuaa?)
-		unit_high=""
-		m_high=0
-		;;
-	cuaa??)
-		unit_high=`expr $i : 'cuaa\(.\).$'`
-		m_high=`ttyminor $unit_high`
-		;;
-	esac
-	unit=$unit_high$unit_low
-	m=$(($m_high << 16 | `ttyminor $unit_low`))
-	mknod cuaa$unit c 28 $(($m | 128)) uucp:dialer
-	mknod cuaia$unit c 28 $(($m | 32 | 128)) uucp:dialer
-	mknod cuala$unit c 28 $(($m | 64 | 128)) uucp:dialer
-	umask 77
-	;;
-
-tty?|tty0?|ttyd?|ttyd??)
-	unit_low=`expr $i : 'tty.*\(.\)$'`
-	case $i in
-	tty?|tty0?|ttyd?)
-		unit_high=""
-		m_high=0
-		;;
-	ttyd??)
-		unit_high=`expr $i : 'ttyd\(.\).$'`
-		m_high=`ttyminor $unit_high`
-		;;
-	esac
-	unit=$unit_high$unit_low
-	m=$(($m_high << 16 | `ttyminor $unit_low`))
-	mknod ttyd$unit c 28 $m
-	mknod ttyid$unit c 28 $(($m | 32))
-	mknod ttyld$unit c 28 $(($m | 64))
-	;;
-
-cuac?)
-	umask 7
-	portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
-		  g h i j k l m n o p q r s t u v"
-	major=48
-	card=`expr $i : 'cua.*\(.\)$'`
-	for unit in $portlist
-	do
-		minor=`ttyminor $unit`
-		minor=$(($card * 65536 + $minor))
-		name=$card$unit
-		mknod cuac$name c $major $(($minor + 128)) uucp:dialer
-		mknod cuaic$name c $major $(($minor + 32 + 128)) uucp:dialer
-		mknod cualc$name c $major $(($minor + 64 + 128)) uucp:dialer
-	done
-	umask 77
-	;;
-
-ttyc?)
-	portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
-		  g h i j k l m n o p q r s t u v"
-	major=48
-	card=`expr $i : 'tty.*\(.\)$'`
-	for unit in $portlist
-	do
-		minor=`ttyminor $unit`
-		minor=$(($card * 65536 + $minor))
-		name=$card$unit
-		mknod ttyc$name c $major $minor
-		mknod ttyic$name c $major $(($minor + 32))
-		mknod ttylc$name c $major $(($minor + 64))
-	done
-	;;
-
-# RISCom8 'rc' driver entries
-
-cuam?)
-	umask 7
-	unit=`expr $i : 'cua.*\(.\)$'`
-	m=`ttyminor $unit`
-	mknod cuam$unit c 63 $(($m + 128)) uucp:dialer
-	umask 77
-	;;
-
-ttym?)
-	unit=`expr $i : 'tty.*\(.\)$'`
-	m=`ttyminor $unit`
-	mknod ttym$unit c 63 $m
-	;;
-
-# Specialix SI/XIO.
-# Note: these are 'base 1' to match the numbers on the panels, and to match
-#       the manual that comes with the system.
-ttyA*)
-	major=68
-	units=`expr $i : 'ttyA\(.*\)$'`
-	port=1
-	while [ $port -le $units ]; do
-		minor=$(($port - 1))
-		name=$(zeropad 2 $port)
-		mknod ttyA$name c $major $minor
-		mknod ttyiA$name c $major $(($minor + 65536))
-		mknod ttylA$name c $major $(($minor + 131072))
-		port=$(($port + 1))
-	done
-	# For the user-mode control program, 'sicontrol'
-	mknod si_control c 68 262144
-	;;
-
-cuaA*)
-	umask 7
-	major=68
-	units=`expr $i : 'cuaA\(.*\)$'`
-	port=1
-	while [ $port -le $units ]; do
-		minor=$(($port - 1))
-		name=$(zeropad 2 $port)
-		mknod cuaA$name c $major $(($minor + 128)) uucp:dialer
-		mknod cuaiA$name c $major $(($minor + 128 + 65536)) \
-		    uucp:dialer
-		mknod cualA$name c $major $(($minor + 128 + 131072)) \
-		    uucp:dialer
-		port=$(($port + 1))
-	done
-	umask 77
-	;;
-
-# Alpha AS8[24]00 (TurboLaser) console.
-zs?)
-	unit=`expr $i : 'zs.*\(.\)$'`
-	m=`ttyminor $unit`
-	mknod zs$unit c 135 $m
-	;;
-
-# Digiboard PC/?? 16 port card.
-# The current scheme of minor numbering is:
-#
-#       unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5}
-#
-#   CARD bitfield in future versions may be extended to 3 bits.
-#
-# See dgb(4)
-#
-ttyD?)
-	portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
-	major=58
-	card=`expr $i : 'tty.*\(.\)$'`
-	for unit in $portlist
-	do
-		minor=`ttyminor $unit`
-		minor=$(($card * 65536 + $minor))
-		name=$card$unit
-		mknod ttyD$name c $major $minor
-		mknod ttyiD$name c $major $(($minor + 32))
-		mknod ttylD$name c $major $(($minor + 64))
-	done
-
-	# Also create devices for the digi driver
-	umask 7
-	major=162
-	card=`expr $i : 'tty.*\(.\)$'`
-	rm -f digi$card.ctl
-	mknod digi$card.ctl c $major $(($card * 65536 + 8388608)) uucp:dialer
-	unit=0
-	while [ $unit -lt 16 ]
-	do
-		base=$(($card * 65536 + $unit))
-		name=$card.$unit
-		rm -f tty*D$name
-		mknod ttyD$name c $major $base
-		mknod ttyiD$name c $major $(($base + 1048576))
-		mknod ttylD$name c $major $(($base + 2097152))
-		unit=$(($unit + 1))
-	done
-	umask 77
-	;;
-
-cuaD?)
-	umask 7
-	portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
-	major=58
-	card=`expr $i : 'cua.*\(.\)$'`
-	for unit in $portlist
-	do
-		minor=`ttyminor $unit`
-		minor=$(($card * 65536 + $minor))
-		name=$card$unit
-		mknod cuaD$name c $major $(($minor + 128)) uucp:dialer
-		mknod cuaiD$name c $major $(($minor + 32 + 128)) uucp:dialer
-		mknod cualD$name c $major $(($minor + 64 + 128)) uucp:dialer
-	done
-
-	# Also create devices for the digi driver
-	major=162
-	card=`expr $i : 'cua.*\(.\)$'`
-	rm -f digi$card.ctl
-	mknod digi$card.ctl c $major $(($card * 65536 + 8388608)) uucp:dialer
-	unit=0
-	while [ $unit -lt 16 ]
-	do
-		base=$(($card * 65536 + $unit))
-		name=$card.$unit
-		rm -f cua*D$name
-		mknod cuaD$name c $major $(($base + 4194304)) uucp:dialer
-		mknod cuaiD$name c $major $(($base + 5242880)) uucp:dialer
-		mknod cualD$name c $major $(($base + 6291456)) uucp:dialer
-		unit=$(($unit + 1))
-	done
-	umask 77
-	;;
-
-# Digiboard Xem - superceeded by the digi device above
-#
-ttyM*)
-	portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
-	modulelist="a b c d"
-	major=101
-	card=`expr $i : 'tty.*\(.\)$'`
-	for unit in $modulelist
-	do
-		moduleminor=`ttyminor $unit`
-		moduleminor=$(($moduleminor % 10 * 16))
-		modulename=$unit
-
-		for unit in $portlist
-		do
-			minor=`ttyminor $unit`
-			minor=$(($card * 65536 + $minor + $moduleminor))
-			name=$card$modulename$unit
-			rm -f tty*M$name
-			mknod ttyM$name c $major $minor
-			mknod ttyiM$name c $major $(($minor + 64))
-			mknod ttylM$name c $major $(($minor + 128))
-		done
-	done
-	;;
-
-cuaM?)
-	umask 7
-	portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
-	modulelist="a b c d"
-	major=101
-	card=`expr $i : 'cua.*\(.\)$'`
-	for unit in $modulelist
-	do
-		moduleminor=`ttyminor $unit`
-		moduleminor=$(($moduleminor % 10 * 16))
-		modulename=$unit
-
-		for unit in $portlist
-		do
-			minor=`ttyminor $unit`
-			minor=$(($card * 65536 + $minor + $moduleminor))
-			name=$card$modulename$unit
-			rm -f cua*M$name
-			mknod cuaM$name c $major $(($minor + 262144)) \
-			    uucp:dialer
-			mknod cuaiM$name c $major $(($minor + 64 + 262144)) \
-			    uucp:dialer
-			mknod cualM$name c $major $(($minor + 128 + 262144)) \
-			    uucp:dialer
-		done
-	done
-	umask 77
-	;;
-
-ttyR?)
-	major=81
-	BOARD=1; Rnum=0
-	MINOR=$(($BOARD * 65536))
-	controllers=$(
-		dmesg | while read first rest; do
-			case "$first" in
-			RocketPort[0-4])
-				echo "$first"
-				;;
-			esac
-		done
-	)
-	rm -f ttyR* ttyiR* ttylR*
-	for i in $controllers; do
-	   ndevices=$(
-		dmesg | while read first foo bar ports rest; do
-			case "$first" in
-			$i*)
-				echo "$ports"
-				;;
-			esac
-		done
-	   )
-	   echo -n "Creating $ndevices devices for $i: "
-	   dev=0
-	   while [ $dev -lt $ndevices ]; do
-		   mknod ttyR$Rnum c $major $MINOR
-		   mknod ttyiR$Rnum c $major $(($MINOR + 32))
-		   mknod ttylR$Rnum c $major $(($MINOR + 64))
-		   Rnum=$(($Rnum + 1))
-		   MINOR=$(($MINOR + 1))
-		   dev=$(($dev + 1))
-	   done
-		BOARD=$(($BOARD + 1))
-		MINOR=$(($BOARD * 65536))
-	   echo " "
-	done
-	;;
-
-cuaR?)
-	major=81
-	BOARD=1; Rnum=0
-	MINOR=$(($BOARD * 65536))
-	controllers=$(
-		dmesg | while read first rest; do
-			case "$first" in
-			RocketPort[0-4])
-				echo "$first"
-				;;
-			esac
-		done
-	)
-	rm -f cuaR* cuaiR* cualR*
-	for i in $controllers; do
-	   ndevices=$(
-		dmesg | while read first foo bar ports rest; do
-			case "$first" in
-			$i*)
-				echo "$ports"
-				;;
-			esac
-		done
-	   )
-	   echo -n "Creating $ndevices devices for $i: "
-	   dev=0
-	   while [ $dev -lt $ndevices ]; do
-		   mknod cuaR$Rnum c  $major $(($MINOR + 128)) uucp:dialer
-		   mknod cuaiR$Rnum c $major $(($MINOR + 128 + 32)) \
-		       uucp:dialer
-		   mknod cualR$Rnum c $major $(($MINOR + 128 + 64)) \
-		       uucp:dialer
-		   Rnum=$(($Rnum + 1))
-		   MINOR=$(($MINOR + 1))
-		   dev=$(($dev + 1))
-	   done
-		BOARD=$(($BOARD + 1))
-		MINOR=$(($BOARD * 65536))
-	   echo " "
-	done
-	;;
-
-mse*)
-	unit=`expr $i : 'mse\(.*\)'`
-	chr=27
-	# non-blocking for X11
-	mknod mse$unit c $chr `unit2minor $(($unit * 2 + 1))`
-	;;
-
-psm*)
-	unit=`expr $i : 'psm\(.*\)'`
-	chr=21
-	# non-blocking for X11
-	mknod psm$unit c $chr `unit2minor $(($unit * 2 + 1))`
-	;;
-
-mouse*)
-	name=`expr $i : 'mouse\(.*\)'`
-	if [ ! -c $name ]; then
-		$0 $name			# make the appropriate device
-	fi
-	ln -fs $name mouse
-	;;
-
-pcaudio)
-	mknod pcaudio c 24 0
-	mknod pcaudioctl c 24 128
-	;;
-
-socksys)
-	mknod socksys c 41 0
-	mknod spx c 41 1
-	ln -fs socksys nfsd
-	chmod 666 socksys nfsd spx
-	;;
-
-snd*)
-#
-# changes from Linux voxware
-# minor		Linux			FreeBSD
-# 8		sequencer2 (aka music0)	music0
-# 17		patmgr0			sequencer1
-# 33		patmgr1			sequencer2
-#
-
-	unit=`expr $i : 'snd\(.*\)'`
-	chr=30
-
-	# XXX write this less verbosely, like std
-	snd_security_hole=0	# XXX
-	umask $snd_security_hole
-
-	ln -fs mixer$unit mixer
-	ln -fs sequencer$unit sequencer
-	ln -fs dsp$unit dsp
-	ln -fs audio$unit audio
-	ln -fs dspW$unit dspW
-	ln -fs music$unit music
-	ln -fs pss$unit pss
-
-	mknod mixer$unit	c $chr `unit2minor $(($unit * 16 + 0))`
-	mknod sequencer$unit	c $chr `unit2minor $(($unit * 16 + 1))`
-	mknod midi$unit		c $chr `unit2minor $(($unit * 16 + 2))`
-	mknod dsp$unit		c $chr `unit2minor $(($unit * 16 + 3))`
-	mknod audio$unit	c $chr `unit2minor $(($unit * 16 + 4))`
-	mknod dspW$unit		c $chr `unit2minor $(($unit * 16 + 5))`
-	mknod sndstat		c $chr 6
-				# minor number 7 is unused
-	mknod music$unit	c $chr `unit2minor $(($unit * 16 + 8))`
-	mknod pss$unit		c $chr `unit2minor $(($unit * 16 + 9))`
-				# minor number 10 is unused
-	mknod midistat		c $chr 11
-				# minor numbers 12-15 are unused
-	umask 77
-	;;
-
-vat)
-	mknod vatio c 25 128
-	chmod 660 vatio
-	;;
-
-gsc*)
-	unit=`expr $i : 'gsc\(.*\)'`
-	mknod gsc${unit} c 47 `unit2minor $unit`
-	mknod gsc${unit}p c 47 `unit2minor $(($unit + 8))`
-	mknod gsc${unit}d c 47 `unit2minor $(($unit + 32))`
-	mknod gsc${unit}pd c 47 `unit2minor $(($unit + 40))`
-	chmod 666 gsc${unit}*
-	;;
-
-acpi)
-	mknod acpi c 152 0 root:operator
-	chmod 660 acpi
-	;;
-
-apm)
-	mknod apm c 39 0 root:operator
-	chmod 664 apm
-	;;
-
-apmctl)
-	mknod apmctl c 39 8 root:operator
-	chmod 660 apmctl
-	;;
-
-card*)
-	unit=`expr $i : 'card\(.*\)'`
-	chr=50
-	mknod card$unit c $chr `unit2minor $unit`
-	chmod 644 card$unit
-	;;
-
-ti*)	unit=`expr $i : 'ti\(.*\)'`
-	chr=153
-	mknod ti$unit c $chr `unit2minor $unit`
-	chmod 600 ti$unit
-	;;
-
-ttyx?|ttyy?|ttyz?)
-	case $i in
-	*0) unit=0;;	*1) unit=1;;	*2) unit=2;;	*3) unit=3;;
-	*4) unit=4;;	*5) unit=5;;	*6) unit=6;;	*7) unit=7;;
-	*8) unit=8;;	*9) unit=9;;	*a) unit=10;;	*b) unit=11;;
-	*c) unit=12;;	*d) unit=13;;	*e) unit=14;;	*f) unit=15;;
-	esac
-	case $i in
-	ttyy?)  unit=$(($unit + 16));;
-	ttyz?)  unit=$(($unit + 32));;
-	esac
-	mknod $i c 42 $unit
-	;;
-
-cronyx)
-	mknod cronyx c 42 63
-	;;
-
-joy)
-	mknod joy0 c 51 0 root:operator
-	mknod joy1 c 51 1 root:operator
-	chmod 640  joy0 joy1
-	;;
-
-spigot)
-	mknod spigot c 11 0
-	chmod 444 spigot
-	;;
-
-ctx?)
-	unit=`expr $i : 'ctx\(.*\)'`
-	mknod ctx$unit c 40 `unit2minor $unit`
-	chmod 444 ctx$unit
-	;;
-
-meteor?)
-	unit=`expr $i : 'meteor\(.*\)'`
-	mknod meteor$unit c 67 `unit2minor $unit`
-	chmod 444 meteor$unit
-	;;
-
-bktr?)
-	unit=`expr $i : 'bktr\(.*\)'`
-	mknod bktr$unit c 92 `unit2minor $unit`
-	mknod tuner$unit c 92 `unit2minor $((16 + $unit))`
-	mknod vbi$unit c 92 `unit2minor $((32 + $unit))`
-	chmod 444 bktr$unit tuner$unit vbi$unit
-	;;
-
-tun*)
-	units=`expr $i : 'tun\(.*\)$'`
-	unit=0
-	while [ $unit -le $units ]; do
-		mknod tun$unit c 52 `unit2minor $unit`
-		unit=$(($unit + 1))
-	done
-	;;
-
-tap*)
-	units=`expr $i : 'tap\(.*\)$'`
-	unit=0
-	while [ $unit -le $units ]; do
-		mknod tap$unit c 149 `unit2minor $unit` root:network
-		unit=$(($unit + 1))
-	done
-	;;
-
-sysmouse)
-	mknod sysmouse c 12 128
-	mknod consolectl c 12 255
-	;;
-
-jogdial)
-	mknod jogdial c 160 0
-	;;
-
-snp?)
-	unit=`expr $i : 'snp\(.*\)'`
-	mknod snp$unit c 53 `unit2minor $unit`
-	;;
-
-# dufault@hda.com: If I do much more work on other A-D boards
-# then eventually we'll have an "ad" and "dio" interface and some of these
-# "labpcaio" ones will be gone.
-# labpcaio: D-A and A-D.
-# labpcdio: Digital in and Digital out.
-#
-labpc*)
-	umask 7
-	case $i in
-	labpcaio*)
-		name=labpcaio
-		unit=`expr $i : 'labpcaio\(.*\)'`
-		all="0 1 2 3 4 5 6 7"
-		offset=0
-		;;
-	labpcdio*)
-		name=labpcdio
-		unit=`expr $i : 'labpcdio\(.*\)'`
-		all="0 1 2 3"
-		offset=8
-		;;
-	*)
-		die 3 "Don't know LabPC type $i"
-		;;
-	esac
-	if [ -z "${unit}" ]; then
-		unit=all
-	fi
-	case $unit in
-		0|1|2|3|4|5|6|7)
-				mknod $name$unit c 66 $(($offset + $unit))
-		;;
-		all)
-			for i in $all
-			do
-				mknod $name$i c 66 $(($offset + $i))
-			done
-			;;
-		*)
-			echo "No such LabPC unit: $unit"
-			;;
-	esac
-	umask 77
-	;;
-
-perfmon)
-	mknod perfmon c 2 32 root:kmem
-	chmod 640 perfmon
-	;;
-
-ipl)
-	mknod ipl c 79 0
-	mknod ipnat c 79 1
-	mknod ipstate c 79 2
-	mknod ipauth c 79 3
-	;;
-
-kbd*)
-	unit=`expr $i : 'kbd\(.*\)'`
-	chr=112
-	mknod kbd$unit c $chr `unit2minor $unit`
-	;;
-
-i4b)
-	mknod i4b c 60 0
-	;;
-
-i4bctl)
-	mknod i4bctl c 55 0
-	;;
-
-i4brbch*)
-	unit=`expr $i : 'i4brbch\(.*\)'`
-	mknod i4brbch$unit c 57 `unit2minor $unit`
-	;;
-
-i4bteld*)
-	offset=64
-	unit=`expr $i : 'i4bteld\(.*\)'`
-	mknod i4bteld$unit c 56 `unit2minor $(($offset + $unit))`
-	;;
-
-i4btel*)
-	unit=`expr $i : 'i4btel\(.*\)'`
-	mknod i4btel$unit c 56 `unit2minor $unit`
-	;;
-
-i4btrc*)
-	unit=`expr $i : 'i4btrc\(.*\)'`
-	mknod i4btrc$unit c 59 `unit2minor $unit`
-	;;
-
-aac*)
-	unit=`expr $i : 'aac\(.*\)'`
-	mknod aac$unit c 150 `unit2minor $unit`
-	ln -fs aac$unit afa$unit
-	ln -fs aac$unit hpn$unit
-	;;
-
-mlx*)
-	unit=`expr $i : 'mlx\(.*\)'`
-	mknod mlx$unit c 130 `unit2minor $unit`
-	;;
-
-mly*)
-	unit=`expr $i : 'mlx\(.*\)'`
-	mknod mlx$unit c 158 `unit2minor $unit`
-	;;
-
-amr*)
-	unit=`expr $i : 'amr\(.*\)'`
-	mknod amr$unit c 132 `unit2minor $unit`
-	;;
-
-ciss*)
-	unit=`expr $i : 'ciss\(.*\)'`
-	mknod ciss$unit c 166 `unit2minor $unit`
-	;;
-
-3dfx*)
-	unit=`expr $i : '3dfx\(.*\)'`
-	mknod 3dfx$unit c 107 `unit2minor $unit`
-	ln -sf 3dfx$unit 3dfx
-   ln -sf 3dfx$unit voodoo
-	;;
-
-agpgart)
-	mknod agpgart c 148 0
-	;;
-
-twe*)
-	unit=`expr $i : 'twe\(.*\)'`
-	mknod twe$unit c 146 `unit2minor $unit`
-	;;
-
-tw*)
-	unit=`expr $i : 'tw\(.*\)'`
-	mknod tw$unit c 19 `unit2minor $unit` root:operator
-	;;
-
-cfs*)
-	unit=`expr $i : 'cfs\(.*\)'`
-	mknod cfs$unit c 93 $unit root:operator
-	;;
-
-nsmb*)
-	unit=`expr $i : 'nsmb\(.*\)'`
-	mknod nsmb$unit c 144 $unit
-	;;
-
-elan*)
-	mknod elan-mmcr c 100 0	# XXX local major
-	chmod 600 elan-mmcr
-	;;
-
-crypto)
-	mknod crypto c 70 0 root:operator
-	chmod 666 crypto
-	;;
-
-fwmem*)
-	unit=`expr $i : 'fwmem\(.*\)'`
-	mknod fwmem$unit c 127 $((1<<24 | $unit)) root:operator
-	chmod 660 fwmem$unit
-	;;
-
-fw*)
-	unit=`expr $i : 'fw\(.*\)'`
-	mknod fw$unit c 127 $unit root:operator
-	chmod 660 fw$unit
-	;;
-
-local)
-	umask 0			# XXX should be elsewhere
-	sh $0.local
-	umask 77
-	;;
-
-*)
-	echo $i - no such device name
-	;;
-
-esac
-done
diff --git a/etc/MAKEDEV.local b/etc/MAKEDEV.local
deleted file mode 100644
index 06cc074..0000000
--- a/etc/MAKEDEV.local
+++ /dev/null
@@ -1,50 +0,0 @@
-#!/bin/sh -
-#
-# Copyright (c) 1991 The Regents of the University of California.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-#    must display the following acknowledgement:
-#	This product includes software developed by the University of
-#	California, Berkeley and its contributors.
-# 4. Neither the name of the University nor the names of its contributors
-#    may be used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-# SUCH DAMAGE.
-#
-# $FreeBSD$
-#	@(#)MAKEDEV.local	5.1 (Berkeley) 3/22/91
-#
-
-# Local device MAKEDEV script.
-
-PATH=/sbin:/bin:/usr/bin
-umask 77
-for i
-do
-case $i in
-
-*)
-	echo 'MAKEDEV.local: no such device.'
-	;;
-esac
-done