diff options
author | rgrimes <rgrimes@FreeBSD.org> | 1993-10-16 12:05:51 +0000 |
---|---|---|
committer | rgrimes <rgrimes@FreeBSD.org> | 1993-10-16 12:05:51 +0000 |
commit | 672d7f757de0bafdec3ec37bc9fcb3a2737fe08f (patch) | |
tree | 4874bebe64a43588c071d2f49e0ecda0821c11bc | |
parent | 81d35d6d98ccc9ae326a9d8dd1efd7bc491b9463 (diff) | |
download | FreeBSD-src-672d7f757de0bafdec3ec37bc9fcb3a2737fe08f.zip FreeBSD-src-672d7f757de0bafdec3ec37bc9fcb3a2737fe08f.tar.gz |
Fix the title up on this, removed the date and format it to match
the RELEASE NOTES.
Adaptec controllers are now 154x and 174x series, no more reference
to specific models. Revamp the CSI hard disk controller section in
general to be more user readable.
Add the fact that the Mitsumi CDROM controller and drive are now
supported.
Add a note that the Intel 82501 serial chip is NOT supported.
Floppy controller is fd0, not fdc0, same for wd disk controller.
-rw-r--r-- | etc/etc.i386/install_notes | 36 |
1 files changed, 26 insertions, 10 deletions
diff --git a/etc/etc.i386/install_notes b/etc/etc.i386/install_notes index 0cc86f6..e8ac5b5 100644 --- a/etc/etc.i386/install_notes +++ b/etc/etc.i386/install_notes @@ -1,5 +1,6 @@ -FreeBSD 1.0 -INSTALLATION NOTES <2.00, 10 September 1993> + INSTALLATION NOTES + FreeBSD + Release 1.0 These notes have been prepared from those written originally for NetBSD 0.9. The conversion was done by someone who has had experience with @@ -137,40 +138,55 @@ allow you to run X and/or compile, but it's extremely slow.) Supported devices include: Standard floppy controllers + Standard hard disk controllers: MFM ESDI IDE RLL + SCSI hard disk controllers: - Adaptec AHA-1542{A,B,C}, -1742 [kcopy-ah-floppy] - Bustek 742 (EISA) Ultrastor 14f and 34f [kcopy-bt-floppy] + Adaptec 154x series * [kcopy-ah-floppy] + Adaptec 174x series + Buslogic 545S + Bustek 742 (EISA) [kcopy-bt-floppy] + DTC 3290 in 1542 emulation mode * + Ultrastor 14f and 34f + + * Your system can NOT have more than 16MB of memory with + these controllers. + Display Adaptors: MDA CGA VGA (and SVGA) HGC + Serial communications ports 8250 16450 16550A [4-port multi-serial cards - require kernel built with MULTI_PORT option] + [We do not support the Intel 82501 serial chip used + in some PC's at this time] + Ethernet controllers SMC/WD 8003, 8013, and equivalents (including the SMC "Elite" series) Novell NE1000, NE2000 3COM 3c503 ISOLAN ISOLink + Tape drives: QIC-02 format tape drives most SCSI tape/DAT drives [an early QIC-40 or QIC-80 tape driver exists, but is not yet incorporated into FreeBSD] + CD-ROM drives: - most SCSI CD-ROM drives - [an early MITSUMI non-SCSI CD-ROM driver exists, - but is not yet incorporated into FreeBSD] + Mitsumi CDROM drive with Mitsumi Controller + Most SCSI CD-ROM drives on a supported SCSI controller To be detected by the distributed kernels, the devices must be configured as follows: (Note: IRQ 9 is the same as IRQ 2 @@ -178,10 +194,10 @@ on ISA/EISA based machines) Device Name Port IRQ DRQ Misc ------ ---- ---- --- --- ---- -Floppy Cntlr. fdc0 0x3f0 6 2 +Floppy Cntlr. fd0 0x3f0 6 2 Std. Hard Disk Cntlr. - wdc0 0x1f0 14 + wd0 0x1f0 14 AHA-154x SCSI Cntlr. 0x330 11 5 [kcopy-ah-floppy] @@ -1036,4 +1052,4 @@ THANKS FOR USING THIS; that's what makes it all worthwhile. as they will end up in our personal mail spools. We will be happy to make other arrangements] -This is $Id: install_notes,v 1.8 1993/10/01 04:43:56 rgrimes Exp $ +This is $Id: install_notes,v 1.9 1993/10/01 19:22:43 rgrimes Exp $ |