Sweep man pages replacing ad -> ada.

Approved by:	re (blackend)
MFC after:	1 week
X-MFC note:	stable/9 only

21 files changed, 87 insertions, 87 deletions

diff --git a/bin/dd/dd.1 b/bin/dd/dd.1
index 60b0b3e..fa6d9a9 100644
--- a/bin/dd/dd.1
+++ b/bin/dd/dd.1
@@ -32,7 +32,7 @@
 .\"     @(#)dd.1	8.2 (Berkeley) 1/13/94
 .\" $FreeBSD$
 .\"
-.Dd January 23, 2009
+.Dd October 1, 2013
 .Dt DD 1
 .Os
 .Sh NAME
@@ -378,12 +378,12 @@ will exit.
 .Sh EXAMPLES
 Check that a disk drive contains no bad blocks:
 .Pp
-.Dl "dd if=/dev/ad0 of=/dev/null bs=1m"
+.Dl "dd if=/dev/ada0 of=/dev/null bs=1m"
 .Pp
 Do a refresh of a disk drive, in order to prevent presently
 recoverable read errors from progressing into unrecoverable read errors:
 .Pp
-.Dl "dd if=/dev/ad0 of=/dev/ad0 bs=1m"
+.Dl "dd if=/dev/ada0 of=/dev/ada0 bs=1m"
 .Pp
 Remove parity bit from a file:
 .Pp
diff --git a/sbin/bsdlabel/bsdlabel.8 b/sbin/bsdlabel/bsdlabel.8
index e5e4714..d31187b 100644
--- a/sbin/bsdlabel/bsdlabel.8
+++ b/sbin/bsdlabel/bsdlabel.8
@@ -31,7 +31,7 @@
 .\"	@(#)disklabel.8	8.2 (Berkeley) 4/19/94
 .\" $FreeBSD$
 .\"
-.Dd March 5, 2011
+.Dd October 1, 2013
 .Dt BSDLABEL 8
 .Os
 .Sh NAME
@@ -457,9 +457,9 @@ such as
 and
 .Cm * ,
 which could be used as a source file for
-.Dq Li "bsdlabel -R ad0s1 new_label_file" :
+.Dq Li "bsdlabel -R ada0s1 new_label_file" :
 .Bd -literal -offset 4n
-# /dev/ad0s1:
+# /dev/ada0s1:
 
 8 partitions:
 #        size   offset    fstype   [fsize bsize bps/cpg]
diff --git a/sbin/ccdconfig/ccdconfig.8 b/sbin/ccdconfig/ccdconfig.8
index 99a1762..977da81 100644
--- a/sbin/ccdconfig/ccdconfig.8
+++ b/sbin/ccdconfig/ccdconfig.8
@@ -28,7 +28,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd July 17, 1995
+.Dd October 1, 2013
 .Dt CCDCONFIG 8
 .Os
 .Sh NAME
@@ -180,7 +180,7 @@ and read it from
 mdadm --create --chunk=32 --level=0 --raid-devices=2 /dev/md0 \\
    /dev/hda1 /dev/hdb1
 # Make the RAID-0 just created available on FreeBSD:
-ccdconfig -c /dev/ccd0 32 linux /dev/ad0s1 /dev/ad0s2
+ccdconfig -c /dev/ccd0 32 linux /dev/ada0s1 /dev/ada0s2
 .Ed
 .Pp
 When you create a new ccd disk you generally want to
diff --git a/sbin/fdisk/fdisk.8 b/sbin/fdisk/fdisk.8
index 1764b64..fcab133 100644
--- a/sbin/fdisk/fdisk.8
+++ b/sbin/fdisk/fdisk.8
@@ -1,6 +1,6 @@
 .\" $FreeBSD$
 .\"
-.Dd May 24, 2009
+.Dd October 1, 2013
 .Dt FDISK 8
 .Os
 .Sh NAME
@@ -159,7 +159,7 @@ mounted root device.
 When called with no arguments, it prints the sector 0 slice table.
 An example follows:
 .Bd -literal
-	******* Working on device /dev/ad0 *******
+	******* Working on device /dev/ada0 *******
 	parameters extracted from in-core disklabel are:
 	cylinders=769 heads=15 sectors/track=33 (495 blks/cyl)
 
diff --git a/sbin/gbde/gbde.8 b/sbin/gbde/gbde.8
index 96bbb60..efd3156 100644
--- a/sbin/gbde/gbde.8
+++ b/sbin/gbde/gbde.8
@@ -31,7 +31,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd February 8, 2006
+.Dd October 1, 2013
 .Dt GBDE 8
 .Os
 .Sh NAME
@@ -207,23 +207,23 @@ used).
 .Sh EXAMPLES
 To initialize a device, using default parameters:
 .Pp
-.Dl "gbde init /dev/ad0s1f -L /etc/ad0s1f.lock"
+.Dl "gbde init /dev/ada0s1f -L /etc/ada0s1f.lock"
 .Pp
 To attach an encrypted device:
 .Pp
-.Dl "gbde attach ad0s1f -l /etc/ad0s1f.lock"
+.Dl "gbde attach ada0s1f -l /etc/ada0s1f.lock"
 .Pp
 The encrypted device has the suffix
 .Pa .bde
 so a typical
 command to create and mount a file system would be:
 .Pp
-.Dl "newfs /dev/ad0s1f.bde"
-.Dl "mount /dev/ad0s1f.bde /secret"
+.Dl "newfs /dev/ada0s1f.bde"
+.Dl "mount /dev/ada0s1f.bde /secret"
 .Pp
 To detach an encrypted device:
 .Pp
-.Dl "gbde detach ad0s1f"
+.Dl "gbde detach ada0s1f"
 .Pp
 Please notice that detaching an encrypted device corresponds to
 physically removing it, do not forget to unmount the file system first.
@@ -231,11 +231,11 @@ physically removing it, do not forget to unmount the file system first.
 To initialize the second key using a detached lockfile and a trivial
 pass-phrase:
 .Pp
-.Dl "gbde setkey ad0s1f -n 2 -P foo -L key2.lockfile"
+.Dl "gbde setkey ada0s1f -n 2 -P foo -L key2.lockfile"
 .Pp
 To destroy all copies of the masterkey:
 .Pp
-.Dl "gbde destroy ad0s1f -n -1"
+.Dl "gbde destroy ada0s1f -n -1"
 .Sh SEE ALSO
 .Xr gbde 4 ,
 .Xr geom 4
diff --git a/sbin/geom/class/eli/geli.8 b/sbin/geom/class/eli/geli.8
index ad70798..55cf844 100644
--- a/sbin/geom/class/eli/geli.8
+++ b/sbin/geom/class/eli/geli.8
@@ -24,7 +24,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd July 5, 2013
+.Dd October 1, 2013
 .Dt GELI 8
 .Os
 .Sh NAME
@@ -841,10 +841,10 @@ Create an encrypted provider for use by the user, but remember that users
 forget their passphrases, so backup the Master Key with your own random key:
 .Bd -literal -offset indent
 # dd if=/dev/random of=/mnt/pendrive/keys/`hostname` bs=64 count=1
-# geli init -P -K /mnt/pendrive/keys/`hostname` /dev/ad0s1e
-# geli backup /dev/ad0s1e /mnt/pendrive/backups/`hostname`
+# geli init -P -K /mnt/pendrive/keys/`hostname` /dev/ada0s1e
+# geli backup /dev/ada0s1e /mnt/pendrive/backups/`hostname`
 (use key number 0, so the encrypted Master Key will be re-encrypted by this)
-# geli setkey -n 0 -k /mnt/pendrive/keys/`hostname` /dev/ad0s1e
+# geli setkey -n 0 -k /mnt/pendrive/keys/`hostname` /dev/ada0s1e
 (allow the user to enter his passphrase)
 Enter new passphrase:
 Reenter new passphrase:
@@ -852,9 +852,9 @@ Reenter new passphrase:
 .Pp
 Encrypted swap partition setup:
 .Bd -literal -offset indent
-# dd if=/dev/random of=/dev/ad0s1b bs=1m
-# geli onetime -d -e 3des ad0s1b
-# swapon /dev/ad0s1b.eli
+# dd if=/dev/random of=/dev/ada0s1b bs=1m
+# geli onetime -d -e 3des ada0s1b
+# swapon /dev/ada0s1b.eli
 .Ed
 .Pp
 The example below shows how to configure two providers which will be attached
diff --git a/sbin/geom/class/shsec/gshsec.8 b/sbin/geom/class/shsec/gshsec.8
index 67dff5d..f72c31c 100644
--- a/sbin/geom/class/shsec/gshsec.8
+++ b/sbin/geom/class/shsec/gshsec.8
@@ -24,7 +24,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd January 8, 2005
+.Dd October 1, 2013
 .Dt GSHSEC 8
 .Os
 .Sh NAME
@@ -108,7 +108,7 @@ Exit status is 0 on success, and 1 if the command fails.
 The following example shows how to create a shared secret device.
 The secret will be split between a slice on a local disk and a USB Pen drive.
 .Bd -literal -offset indent
-gshsec label -v secret /dev/ad0s1 /dev/da0
+gshsec label -v secret /dev/ada0s1 /dev/da0
 newfs /dev/shsec/secret
 .Ed
 .Pp
diff --git a/sbin/geom/class/virstor/gvirstor.8 b/sbin/geom/class/virstor/gvirstor.8
index 99eff52..0273cb4 100644
--- a/sbin/geom/class/virstor/gvirstor.8
+++ b/sbin/geom/class/virstor/gvirstor.8
@@ -24,7 +24,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd August 3, 2012
+.Dd October 1, 2013
 .Dt GVIRSTOR 8
 .Os
 .Sh NAME
@@ -161,7 +161,7 @@ size
 .Pq 4 MiB ,
 with two physical devices for backing storage.
 .Bd -literal -offset indent
-.No gvirstor label -v Ar mydata Ar /dev/ad4 Ar /dev/ad6
+.No gvirstor label -v Ar mydata Ar /dev/ada4 Ar /dev/ada6
 .No newfs Ar /dev/virstor/mydata
 .Ed
 .Pp
@@ -170,11 +170,11 @@ From now on, the virtual device will be available via the
 device entry.
 To add a new physical device / component to an active virstor device:
 .Bd -literal -offset indent
-.No gvirstor add Ar mydata Ar ad8
+.No gvirstor add Ar mydata Ar ada8
 .Ed
 .Pp
 This will add physical storage of
-.Ar ad8
+.Ar ada8
 to
 .Pa /dev/virstor/mydata
 device.
diff --git a/sbin/gvinum/gvinum.8 b/sbin/gvinum/gvinum.8
index 5d36276..d1d10d7 100644
--- a/sbin/gvinum/gvinum.8
+++ b/sbin/gvinum/gvinum.8
@@ -28,7 +28,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd April 10, 2009
+.Dd October 1, 2013
 .Dt GVINUM 8
 .Os
 .Sh NAME
@@ -279,27 +279,27 @@ directory with device nodes for
 objects
 .El
 .Sh EXAMPLES
-To create a mirror on disks /dev/ad1 and /dev/ad2, create a filesystem, mount,
-unmount and then stop
+To create a mirror on disks /dev/ada1 and /dev/ada2, create a filesystem,
+mount, unmount and then stop
 .Ic gvinum :
 .Pp
-.Dl "gvinum mirror /dev/ad1 /dev/ad2"
+.Dl "gvinum mirror /dev/ada1 /dev/ada2"
 .Dl "newfs /dev/gvinum/gvinumvolume0"
 .Dl "mount /dev/gvinum/gvinumvolume0 /mnt"
 .Dl "..."
 .Dl "unmount /mnt"
 .Dl "gvinum stop"
 .Pp
-To create a striped mirror on disks /dev/ad1 /dev/ad2 /dev/ad3 and /dev/ad4
-named "data" and create a filesystem:
+To create a striped mirror on disks /dev/ada1 /dev/ada2 /dev/ada3 and
+/dev/ada4 named "data" and create a filesystem:
 .Pp
-.Dl "gvinum mirror -s -n data /dev/ad1 /dev/ad2 /dev/ad3 /dev/ad4"
+.Dl "gvinum mirror -s -n data /dev/ada1 /dev/ada2 /dev/ada3 /dev/ada4"
 .Dl "newfs /dev/gvinum/data"
 .Pp
-To create a raid5 array on disks /dev/ad1 /dev/ad2 and /dev/ad3, with stripesize
-493k you can use the raid5 command:
+To create a raid5 array on disks /dev/ada1 /dev/ada2 and /dev/ada3,
+with stripesize 493k you can use the raid5 command:
 .Pp
-.Dl "gvinum raid5 -s 493k /dev/ad1 /dev/ad2 /dev/ad3"
+.Dl "gvinum raid5 -s 493k /dev/ada1 /dev/ada2 /dev/ada3"
 .Pp
 Then the volume will be created automatically.
 Afterwards, you have to initialize the volume:
@@ -313,9 +313,9 @@ The list command will give you information about its progress.
 Imagine that one of the drives fails, and the output of 'printconfig' looks
 something like this:
 .Pp
-.Dl "drive gvinumdrive1 device /dev/ad2"
+.Dl "drive gvinumdrive1 device /dev/ada2"
 .Dl "drive gvinumdrive2 device /dev/???"
-.Dl "drive gvinumdrive0 device /dev/ad1"
+.Dl "drive gvinumdrive0 device /dev/ada1"
 .Dl "volume myraid5vol"
 .Dl "plex name myraid5vol.p0 org raid5 986s vol myraid5vol"
 .Dl "sd name myraid5vol.p0.s2 drive gvinumdrive2 len 32538s driveoffset 265s"
@@ -327,7 +327,7 @@ something like this:
 .Pp
 Create a new drive with this configuration:
 .Pp
-.Dl "drive gdrive4 device /dev/ad4"
+.Dl "drive gdrive4 device /dev/ada4"
 .Pp
 Then move the stale subdisk to the new drive:
 .Pp
@@ -344,7 +344,7 @@ might be delayed.
 Given the configuration as in the previous example, growing a RAID-5 or STRIPED
 array is accomplished by using the grow command:
 .Pp
-.Dl "gvinum grow myraid5vol.p0 /dev/ad4"
+.Dl "gvinum grow myraid5vol.p0 /dev/ada4"
 .Pp
 If everything went ok, the plex state should now be set to growable.
 You can then start the growing with the
diff --git a/sbin/mount_msdosfs/mount_msdosfs.8 b/sbin/mount_msdosfs/mount_msdosfs.8
index 3dac013..e7bc764 100644
--- a/sbin/mount_msdosfs/mount_msdosfs.8
+++ b/sbin/mount_msdosfs/mount_msdosfs.8
@@ -30,7 +30,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd December 23, 2008
+.Dd October 1, 2013
 .Dt MOUNT_MSDOSFS 8
 .Os
 .Sh NAME
@@ -182,14 +182,14 @@ Specify text file name with conversion table:
 .El
 .Sh EXAMPLES
 To mount a Russian MS-DOS file system located in
-.Pa /dev/ad1s1 :
+.Pa /dev/ada1s1 :
 .Pp
-.Dl "mount_msdosfs -L ru_RU.KOI8-R -D CP866 /dev/ad1s1 /mnt"
+.Dl "mount_msdosfs -L ru_RU.KOI8-R -D CP866 /dev/ada1s1 /mnt"
 .Pp
 To mount a Japanese MS-DOS file system located in
-.Pa /dev/ad1s1 :
+.Pa /dev/ada1s1 :
 .Pp
-.Dl "mount_msdosfs -L ja_JP.eucJP -D CP932 /dev/ad1s1 /mnt"
+.Dl "mount_msdosfs -L ja_JP.eucJP -D CP932 /dev/ada1s1 /mnt"
 .Sh SEE ALSO
 .Xr mount 2 ,
 .Xr unmount 2 ,
diff --git a/sbin/newfs/newfs.8 b/sbin/newfs/newfs.8
index 51cc833..6764adc 100644
--- a/sbin/newfs/newfs.8
+++ b/sbin/newfs/newfs.8
@@ -28,7 +28,7 @@
 .\"     @(#)newfs.8	8.6 (Berkeley) 5/3/95
 .\" $FreeBSD$
 .\"
-.Dd June 22, 2011
+.Dd October 1, 2013
 .Dt NEWFS 8
 .Os
 .Sh NAME
@@ -285,10 +285,10 @@ to find the alternate superblocks if the standard superblock is lost.
 The size of a sector in bytes (almost never anything but 512).
 .El
 .Sh EXAMPLES
-.Dl newfs /dev/ad3s1a
+.Dl newfs /dev/ada3s1a
 .Pp
 Creates a new ufs file system on
-.Pa ad3s1a .
+.Pa ada3s1a .
 The
 .Nm
 utility will use a block size of 32768 bytes, a fragment size of 4096 bytes
diff --git a/sbin/newfs_msdos/newfs_msdos.8 b/sbin/newfs_msdos/newfs_msdos.8
index ce51113..1627f2d 100644
--- a/sbin/newfs_msdos/newfs_msdos.8
+++ b/sbin/newfs_msdos/newfs_msdos.8
@@ -25,7 +25,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd July 25, 2010
+.Dd October 1, 2013
 .Dt NEWFS_MSDOS 8
 .Os
 .Sh NAME
@@ -209,9 +209,9 @@ The maximum file size is 4GB, even if the file system itself is bigger.
 Exit status is 0 on success and 1 on error.
 .Sh EXAMPLES
 Create a file system, using default parameters, on
-.Pa /dev/ad0s1 :
+.Pa /dev/ada0s1 :
 .Bd -literal -offset indent
-newfs_msdos /dev/ad0s1
+newfs_msdos /dev/ada0s1
 .Ed
 .Pp
 Create a standard 1.44M file system, with volume label
diff --git a/sbin/newfs_nandfs/newfs_nandfs.8 b/sbin/newfs_nandfs/newfs_nandfs.8
index c6a6f1b..6997430 100644
--- a/sbin/newfs_nandfs/newfs_nandfs.8
+++ b/sbin/newfs_nandfs/newfs_nandfs.8
@@ -25,7 +25,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd April 11, 2009
+.Dd October 1, 2013
 .Dt NEWFS_NANDFS 8
 .Os
 .Sh NAME
@@ -58,9 +58,9 @@ Percentage of reserved blocks (5 if not specified).
 Exit status is 0 on success and 1 on error.
 .Sh EXAMPLES
 Create a file system, using default parameters, on
-.Pa /dev/ad0s1 :
+.Pa /dev/ada0s1 :
 .Bd -literal -offset indent
-newfs_nandfs /dev/ad0s1
+newfs_nandfs /dev/ada0s1
 .Ed
 .Sh SEE ALSO
 .Xr disktab 5 ,
diff --git a/sbin/recoverdisk/recoverdisk.1 b/sbin/recoverdisk/recoverdisk.1
index 1661ab8..b3924c5 100644
--- a/sbin/recoverdisk/recoverdisk.1
+++ b/sbin/recoverdisk/recoverdisk.1
@@ -24,7 +24,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd January 5, 2012
+.Dd October 1, 2013
 .Dt RECOVERDISK 1
 .Os
 .Sh NAME
@@ -104,11 +104,11 @@ Percent complete.
 .El
 .Sh EXAMPLES
 .Bd -literal
-# recover data from failing hard drive ad3
-recoverdisk /dev/ad3 /data/disk.img
+# recover data from failing hard drive ada3
+recoverdisk /dev/ada3 /data/disk.img
 
 # clone a hard disk
-recoverdisk /dev/ad3 /dev/ad4
+recoverdisk /dev/ada3 /dev/ada4
 
 # read an ISO image from a CD-ROM
 recoverdisk /dev/cd0 /data/cd.iso
@@ -120,7 +120,7 @@ recoverdisk -r worklist -w worklist /dev/cd0 /data/cd.iso
 recoverdisk /cdrom/file.avi file.avi
 
 # If the disk hangs the system on read-errors try:
-recoverdisk -b 0 /dev/ad3 /somewhere
+recoverdisk -b 0 /dev/ada3 /somewhere
 
 .Ed
 .Sh SEE ALSO
diff --git a/share/man/man4/geom_linux_lvm.4 b/share/man/man4/geom_linux_lvm.4
index 30b875e..7dee047 100644
--- a/share/man/man4/geom_linux_lvm.4
+++ b/share/man/man4/geom_linux_lvm.4
@@ -25,7 +25,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd February 20, 2008
+.Dd October 1, 2013
 .Dt GEOM_LINUX_LVM 4
 .Os
 .Sh NAME
@@ -72,7 +72,7 @@ Providers:
    Sectorsize: 512
    Mode: r0w0e0
 Consumers:
-1. Name: ad0s1
+1. Name: ada0s1
    Mediasize: 80023716864 (75G)
    Sectorsize: 512
    Mode: r0w0e0
diff --git a/share/man/man5/ext2fs.5 b/share/man/man5/ext2fs.5
index a74e599..536561b 100644
--- a/share/man/man5/ext2fs.5
+++ b/share/man/man5/ext2fs.5
@@ -26,7 +26,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd May 16, 2006
+.Dd October 1, 2013
 .Dt EXT2FS 5
 .Os
 .Sh NAME
@@ -53,9 +53,9 @@ file systems.
 To mount a
 .Nm
 volume located on
-.Pa /dev/ad1s1 :
+.Pa /dev/ada1s1 :
 .Pp
-.Dl "mount -t ext2fs /dev/ad1s1 /mnt"
+.Dl "mount -t ext2fs /dev/ada1s1 /mnt"
 .Sh SEE ALSO
 .Xr nmount 2 ,
 .Xr unmount 2 ,
diff --git a/share/man/man5/msdosfs.5 b/share/man/man5/msdosfs.5
index 933577a..70cfe50 100644
--- a/share/man/man5/msdosfs.5
+++ b/share/man/man5/msdosfs.5
@@ -2,7 +2,7 @@
 .\" Written by Tom Rhodes
 .\" This file is in the public domain.
 .\"
-.Dd August 22, 2007
+.Dd October 1, 2013
 .Dt MSDOSFS 5
 .Os
 .Sh NAME
@@ -21,7 +21,7 @@ based file systems.
 .Pp
 The most common usage follows:
 .Pp
-.Dl "mount -t msdosfs /dev/ad0sN /mnt"
+.Dl "mount -t msdosfs /dev/ada0sN /mnt"
 .Pp
 where
 .Ar N
@@ -40,7 +40,7 @@ It is possible to define an entry in
 .Pa /etc/fstab
 that looks similar to:
 .Bd -literal
-/dev/ad0sN		/dos	msdosfs		rw	0	0
+/dev/ada0sN		/dos	msdosfs		rw	0	0
 .Ed
 .Pp
 This will mount an
diff --git a/share/man/man5/reiserfs.5 b/share/man/man5/reiserfs.5
index 2f3eaee..c610f5e 100644
--- a/share/man/man5/reiserfs.5
+++ b/share/man/man5/reiserfs.5
@@ -26,7 +26,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd July 23, 2011
+.Dd October 1, 2013
 .Dt REISERFS 5
 .Os
 .Sh NAME
@@ -53,9 +53,9 @@ file systems.
 To mount a
 .Nm
 volume located on
-.Pa /dev/ad1s1 :
+.Pa /dev/ada1s1 :
 .Pp
-.Dl "mount -t reiserfs /dev/ad1s1 /mnt"
+.Dl "mount -t reiserfs /dev/ada1s1 /mnt"
 .Sh SEE ALSO
 .Xr nmount 2 ,
 .Xr unmount 2 ,
diff --git a/share/man/man8/picobsd.8 b/share/man/man8/picobsd.8
index f4c403e..d1d8c46 100644
--- a/share/man/man8/picobsd.8
+++ b/share/man/man8/picobsd.8
@@ -1,6 +1,6 @@
 .\" -*- nroff-fill -*-
 .\" $FreeBSD$
-.Dd June 25, 2009
+.Dd October 1, 2013
 .Dt PICOBSD 8
 .Os
 .Sh NAME
@@ -408,9 +408,9 @@ and the floppy is ready to boot.
 The same process can be used to store the image on a hard disk
 (entire volume or one of the slices):
 .Bd -literal -offset indent
-dd if=picobsd.bin of=/dev/ad2
-dd if=picobsd.bin of=/dev/ad2s3
-dd if=picobsd.bin of=/dev/ad2 oseek=NN
+dd if=picobsd.bin of=/dev/ada2
+dd if=picobsd.bin of=/dev/ada2s3
+dd if=picobsd.bin of=/dev/ada2 oseek=NN
 .Ed
 .Pp
 The first form will install the image on the entire disk, and it
@@ -435,8 +435,8 @@ You have to use the
 command to properly initialize the label (do not ask why!).
 One way to do this is
 .Bd -literal -offset indent
-disklabel -w ad0s2 auto
-disklabel -e ad0s2
+disklabel -w ada0s2 auto
+disklabel -e ada0s2
 .Ed
 .Pp
 and from the editor enter a line corresponding to the actual partition, e.g.\&
diff --git a/sys/boot/common/loader.8 b/sys/boot/common/loader.8
index 7386f72..fe247ac 100644
--- a/sys/boot/common/loader.8
+++ b/sys/boot/common/loader.8
@@ -24,7 +24,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd January 7, 2012
+.Dd October 1, 2013
 .Dt LOADER 8
 .Os
 .Sh NAME
@@ -972,7 +972,7 @@ autoboot 5
 .Pp
 Set the disk unit of the root device to 2, and then boot.
 This would be needed in a system with two IDE disks,
-with the second IDE disk hardwired to ad2 instead of ad1.
+with the second IDE disk hardwired to ada2 instead of ada1.
 .Bd -literal -offset indent
 set root_disk_unit=2
 boot /boot/kernel/kernel
diff --git a/usr.sbin/boot0cfg/boot0cfg.8 b/usr.sbin/boot0cfg/boot0cfg.8
index 4d622a2..27f94e0 100644
--- a/usr.sbin/boot0cfg/boot0cfg.8
+++ b/usr.sbin/boot0cfg/boot0cfg.8
@@ -24,7 +24,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd February 4, 2012
+.Dd October 1, 2013
 .Dt BOOT0CFG 8
 .Os
 .Sh NAME
@@ -173,17 +173,17 @@ Image for serial consoles (COM1,9600,8,N,1,MODEM)
 .Sh EXAMPLES
 To boot slice 2 on the next boot:
 .Pp
-.Dl "boot0cfg -s 2 ad0"
+.Dl "boot0cfg -s 2 ada0"
 .Pp
 To enable just slices 1 and 3 in the menu:
 .Pp
-.Dl "boot0cfg -m 0x5 ad0"
+.Dl "boot0cfg -m 0x5 ada0"
 .Pp
 To go back to non-interactive booting, use
 .Xr fdisk 8
 to install the default MBR:
 .Pp
-.Dl "fdisk -B ad0"
+.Dl "fdisk -B ada0"
 .Sh SEE ALSO
 .Xr geom 4 ,
 .Xr boot 8 ,