Remove the local management of INTx as this is now taken care of by pci.

Reviewed by:	jhb
MFC after:	3 days

8 files changed, 0 insertions, 32 deletions

diff --git a/sys/dev/ata/chipsets/ata-acerlabs.c b/sys/dev/ata/chipsets/ata-acerlabs.c
index 89e2b01..82e1aab4 100644
--- a/sys/dev/ata/chipsets/ata-acerlabs.c
+++ b/sys/dev/ata/chipsets/ata-acerlabs.c
@@ -113,10 +113,6 @@ ata_ali_chipinit(device_t dev)
 	if ((ctlr->chip->chipid == ATA_ALI_5288) &&
 	    (ata_ahci_chipinit(dev) != ENXIO))
             return 0;
-
-	/* enable PCI interrupt */
-	pci_write_config(dev, PCIR_COMMAND,
-			 pci_read_config(dev, PCIR_COMMAND, 2) & ~0x0400, 2);
 	break;
 
     case ALI_NEW:
diff --git a/sys/dev/ata/chipsets/ata-ahci.c b/sys/dev/ata/chipsets/ata-ahci.c
index 2dc3837..991d2ad 100644
--- a/sys/dev/ata/chipsets/ata-ahci.c
+++ b/sys/dev/ata/chipsets/ata-ahci.c
@@ -135,10 +135,6 @@ ata_ahci_chipinit(device_t dev)
     ctlr->suspend = ata_ahci_suspend;
     ctlr->resume = ata_ahci_ctlr_reset;
 
-    /* enable PCI interrupt */
-    pci_write_config(dev, PCIR_COMMAND,
-		     pci_read_config(dev, PCIR_COMMAND, 2) & ~0x0400, 2);
-
     /* announce we support the HW */
     version = ATA_INL(ctlr->r_res2, ATA_AHCI_VS);
     device_printf(dev,
diff --git a/sys/dev/ata/chipsets/ata-intel.c b/sys/dev/ata/chipsets/ata-intel.c
index b9cc6a2..8bd2f03 100644
--- a/sys/dev/ata/chipsets/ata-intel.c
+++ b/sys/dev/ata/chipsets/ata-intel.c
@@ -213,10 +213,6 @@ ata_intel_chipinit(device_t dev)
 	    ctlr->setmode = ata_intel_sata_setmode;
 	else
 	    ctlr->setmode = ata_sata_setmode;
-
-	/* enable PCI interrupt */
-	pci_write_config(dev, PCIR_COMMAND,
-			 pci_read_config(dev, PCIR_COMMAND, 2) & ~0x0400, 2);
     }
     return 0;
 }
diff --git a/sys/dev/ata/chipsets/ata-marvell.c b/sys/dev/ata/chipsets/ata-marvell.c
index 24d30ed..a0fa485 100644
--- a/sys/dev/ata/chipsets/ata-marvell.c
+++ b/sys/dev/ata/chipsets/ata-marvell.c
@@ -212,9 +212,6 @@ ata_marvell_edma_chipinit(device_t dev)
     ATA_OUTL(ctlr->r_res1, 0x01d64, 0x000000ff/*HC0*/ | 0x0001fe00/*HC1*/ |
 	     /*(1<<19) | (1<<20) | (1<<21) |*/(1<<22) | (1<<24) | (0x7f << 25));
 
-    /* enable PCI interrupt */
-    pci_write_config(dev, PCIR_COMMAND,
-		     pci_read_config(dev, PCIR_COMMAND, 2) & ~0x0400, 2);
     return 0;
 }
 
diff --git a/sys/dev/ata/chipsets/ata-nvidia.c b/sys/dev/ata/chipsets/ata-nvidia.c
index 70c0678..7e03afa 100644
--- a/sys/dev/ata/chipsets/ata-nvidia.c
+++ b/sys/dev/ata/chipsets/ata-nvidia.c
@@ -183,11 +183,6 @@ ata_nvidia_chipinit(device_t dev)
 		/* enable device and PHY state change interrupts */
 		ATA_OUTB(ctlr->r_res2, offset + 1, 0xdd);
 	    }
-
-	    /* enable PCI interrupt */
-	    pci_write_config(dev, PCIR_COMMAND,
-			     pci_read_config(dev, PCIR_COMMAND, 2) & ~0x0400,2);
-
 	}
 	ctlr->setmode = ata_sata_setmode;
     }
diff --git a/sys/dev/ata/chipsets/ata-siliconimage.c b/sys/dev/ata/chipsets/ata-siliconimage.c
index 5c12125..f5093c7 100644
--- a/sys/dev/ata/chipsets/ata-siliconimage.c
+++ b/sys/dev/ata/chipsets/ata-siliconimage.c
@@ -150,10 +150,6 @@ ata_sii_chipinit(device_t dev)
 	ATA_OUTL(ctlr->r_res1, 0x0040, 0x80000000);
 	DELAY(10000);
 	ATA_OUTL(ctlr->r_res1, 0x0040, 0x0000000f);
-
-	/* enable PCI interrupt */
-	pci_write_config(dev, PCIR_COMMAND,
-			 pci_read_config(dev, PCIR_COMMAND, 2) & ~0x0400, 2);
 	break;
 
     case SII_MEMIO:
diff --git a/sys/dev/ata/chipsets/ata-sis.c b/sys/dev/ata/chipsets/ata-sis.c
index b3c86f5..1d9dac7 100644
--- a/sys/dev/ata/chipsets/ata-sis.c
+++ b/sys/dev/ata/chipsets/ata-sis.c
@@ -189,10 +189,6 @@ ata_sis_chipinit(device_t dev)
 	    ctlr->ch_attach = ata_sis_ch_attach;
 	    ctlr->ch_detach = ata_pci_ch_detach;
 	    ctlr->reset = ata_sis_reset;
-
-	    /* enable PCI interrupt */
-	    pci_write_config(dev, PCIR_COMMAND,
-			     pci_read_config(dev, PCIR_COMMAND, 2) & ~0x0400,2);
 	}
 	ctlr->setmode = ata_sata_setmode;
 	return 0;
diff --git a/sys/dev/ata/chipsets/ata-via.c b/sys/dev/ata/chipsets/ata-via.c
index 632f17d..4530adf 100644
--- a/sys/dev/ata/chipsets/ata-via.c
+++ b/sys/dev/ata/chipsets/ata-via.c
@@ -143,10 +143,6 @@ ata_via_chipinit(device_t dev)
 	    ctlr->ch_attach = ata_via_ch_attach;
 	    ctlr->ch_detach = ata_via_ch_detach;
 	    ctlr->reset = ata_via_reset;
-
-	    /* enable PCI interrupt */
-	    pci_write_config(dev, PCIR_COMMAND,
-			     pci_read_config(dev, PCIR_COMMAND, 2) & ~0x0400,2);
 	}
 
 	if (ctlr->chip->cfg2 & VIABAR) {